void RouteEdgeWithLabel(IntEdge intEdge, Label label)
{
//we allow here for the edge to cross its own label
Node sourceNode = routing.IntGraph.Nodes[intEdge.Source];
Node targetNode = routing.IntGraph.Nodes[intEdge.Target];
var sourcePort = new FloatingPort(sourceNode.BoundaryCurve, sourceNode.Center);
var targetPort = new FloatingPort(targetNode.BoundaryCurve, targetNode.Center);
ICurve labelObstacle = labelsToLabelObstacles[label];
var labelPort = new FloatingPort(labelObstacle, label.Center);
SmoothedPolyline poly0;
interactiveEdgeRouter.RouteSplineFromPortToPortWhenTheWholeGraphIsReady(sourcePort, labelPort, true, out poly0);
SmoothedPolyline poly1;
interactiveEdgeRouter.RouteSplineFromPortToPortWhenTheWholeGraphIsReady(labelPort, targetPort, true, out poly1);
Site site = poly1.HeadSite.Next;
Site lastSite = poly0.LastSite;
lastSite.Next = site;
site.Previous = lastSite;
var eg = intEdge.Edge.EdgeGeometry;
eg.SetSmoothedPolylineAndCurve(poly0);
Arrowheads.TrimSplineAndCalculateArrowheads(eg, intEdge.Edge.Source.BoundaryCurve,
intEdge.Edge.Target.BoundaryCurve, eg.Curve, false,
settings.EdgeRoutingSettings.KeepOriginalSpline);
}
/// <summary>
///
/// </summary>
/// <param name="edge"></param>
/// <param name="cornerFitRadius"></param>
public static void CreateSimpleEdgeCurveWithGivenFitRadius(Edge edge, double cornerFitRadius)
{
ValidateArg.IsNotNull(edge, "edge");
var a = edge.Source.Center;
var b = edge.Target.Center;
if (edge.Source == edge.Target)
{
var dx = edge.Source.BoundaryCurve.BoundingBox.Width / 2;
var dy = edge.Source.BoundingBox.Height / 4;
edge.UnderlyingPolyline = CreateUnderlyingPolylineForSelfEdge(a, dx, dy);
for (var site = edge.UnderlyingPolyline.HeadSite.Next; site.Next != null; site = site.Next)
{
CalculateCoefficiensUnderSite(site, cornerFitRadius);
}
edge.Curve = edge.UnderlyingPolyline.CreateCurve();
}
else
{
edge.UnderlyingPolyline = SmoothedPolyline.FromPoints(new[] { a, b });
edge.Curve = edge.UnderlyingPolyline.CreateCurve();
}
if (!Arrowheads.TrimSplineAndCalculateArrowheads(edge.EdgeGeometry, edge.Source.BoundaryCurve, edge.Target.BoundaryCurve, edge.Curve,
true))
{
Arrowheads.CreateBigEnoughSpline(edge);
}
}
/// <summary>
/// populate the geometry including curve and arrowhead positioning for the given edge using simple
/// straight line routing style. Self edges will be drawn as a loop, padding is used to control the
/// size of the loop.
/// </summary>
/// <param name="edge">edge to route</param>
/// <param name="padding">controls size of loop</param>
public static void RouteEdge(Edge edge, double padding)
{
ValidateArg.IsNotNull(edge, "edge");
var eg = edge.EdgeGeometry;
if (eg.SourcePort == null)
{
#if SHARPKIT // Lambdas bind differently in JS
eg.SourcePort = ((Func <Edge, RelativeFloatingPort>)(ed => new RelativeFloatingPort(() => ed.Source.BoundaryCurve,
() => ed.Source.Center)))(edge);
#else
eg.SourcePort = new RelativeFloatingPort(() => edge.Source.BoundaryCurve, () => edge.Source.Center);
#endif
}
if (eg.TargetPort == null)
{
#if SHARPKIT // Lambdas bind differently in JS
eg.TargetPort = ((Func <Edge, RelativeFloatingPort>)(ed => new RelativeFloatingPort(() => ed.Target.BoundaryCurve,
() => ed.Target.Center)))(edge);
#else
eg.TargetPort = new RelativeFloatingPort(() => edge.Target.BoundaryCurve, () => edge.Target.Center);
#endif
}
if (!ContainmentLoop(eg, padding))
{
eg.Curve = GetEdgeLine(edge);
}
Arrowheads.TrimSplineAndCalculateArrowheads(eg, eg.SourcePort.Curve,
eg.TargetPort.Curve, edge.Curve, false, false);
}
void ModifyEdgeByScale(Point delta, GeomEdge edge)
{
//StraightLineEdges.CreateSimpleEdgeCurveWithUnderlyingPolyline(edge);
var sn = edge.Source.UserData as Drawing.Node;
var tn = edge.Target.UserData as Drawing.Node;
//var gg = graph.UserData as Graph;
//var vsn = Viewer.GetIViewerObject(sn);
//var vtn = Viewer.GetIViewerObject(tn);
Drawing.Node oN = null, tN = null;
if (Viewer.GetIViewerObject(sn).MarkedForDragging)
{
tN = sn;
oN = tn;
}
else
{
tN = tn;
oN = sn;
}
Point o = oN.Pos, t = tN.Pos, t_ = t - delta;
double scale = (t - o).Length / (t_ - o).Length;
//double angle = Point.Angle(t, o, t_)*180/Math.PI;
double angle = Point.Angle(t, o, t_);
System.Windows.Media.Matrix mm = System.Windows.Media.Matrix.Identity;
//mm.ScaleAt(scale, scale, o.X, o.Y);
mm.RotateAt(angle, o.X, o.Y);
//PlaneTransformation mt = new PlaneTransformation(mm.M11,mm.M12,mm.OffsetX,mm.M21,mm.M22,mm.OffsetY);
var scaleMatrix = new PlaneTransformation(scale, 0, 0, 0, scale, 0);
var translateToOrigin = new PlaneTransformation(1, 0, -o.X, 0, 1, -o.Y);
var translateToNode = new PlaneTransformation(1, 0, o.X, 0, 1, o.Y);
var rotateMatrix = PlaneTransformation.Rotation(-angle);
var matrix = translateToNode * scaleMatrix * rotateMatrix * translateToOrigin;
if (edge.UnderlyingPolyline != null)
{
var ul = edge.UnderlyingPolyline;
if (tN == sn)
{
ul.HeadSite.Point = t;
}
else
{
ul.LastSite.Point = t;
}
for (Site s = ul.HeadSite.Next; s != ul.LastSite; s = s.Next)
{
s.Point = matrix * s.Point;
}
edge.Curve = ul.CreateCurve();
Arrowheads.TrimSplineAndCalculateArrowheads(edge, edge.Curve, true, false);
}
//edge.Curve = edge.Curve.Transform(matrix);
//var angle= Point.Angle(graph.)
}
void FixArrowheads()
{
foreach (var edge in geometryGraph.Edges)
{
Arrowheads.TrimSplineAndCalculateArrowheads(edge.EdgeGeometry,
edge.Source.BoundaryCurve,
edge.Target.BoundaryCurve,
edge.Curve, false);
}
}
void FixArrowheads()
{
foreach (var edge in geometryGraph.Edges)
{
Arrowheads.TrimSplineAndCalculateArrowheads(edge.EdgeGeometry,
edge.Source.BoundaryCurve,
edge.Target.BoundaryCurve,
edge.Curve, false, this.bundlingSettings.KeepOriginalSpline);
}
}
static void CreateCurveOnChangedPolyline(GeomEdge e)
{
Curve curve = e.UnderlyingPolyline.CreateCurve();
if (
!Arrowheads.TrimSplineAndCalculateArrowheads(e.EdgeGeometry, e.Source.BoundaryCurve,
e.Target.BoundaryCurve, curve, false, false))
{
Arrowheads.CreateBigEnoughSpline(e);
}
}
void CreateSplineForNonSelfEdge(PolyIntEdge es, bool optimizeShortEdges) {
this.ProgressStep();
if (es.LayerEdges != null) {
DrawSplineBySmothingThePolyline(es, optimizeShortEdges);
if (!es.IsVirtualEdge)
{
es.UpdateEdgeLabelPosition(Database.Anchors);
Arrowheads.TrimSplineAndCalculateArrowheads(es.Edge.EdgeGeometry, es.Edge.Source.BoundaryCurve,
es.Edge.Target.BoundaryCurve, es.Curve, true);
}
}
}
static void DrawEdgeWithPort(Edge edge, InteractiveEdgeRouter portRouter, double par0, double par1)
{
var port0 = new CurvePort(edge.Source.BoundaryCurve, par0);
var port1 = new CurvePort(edge.Target.BoundaryCurve, par1);
SmoothedPolyline sp;
var spline = portRouter.RouteSplineFromPortToPortWhenTheWholeGraphIsReady(port0, port1, true, out sp);
Arrowheads.TrimSplineAndCalculateArrowheads(edge.EdgeGeometry,
edge.Source.BoundaryCurve,
edge.Target.BoundaryCurve,
spline, true);
}
void CreateSelfSplines()
{
foreach (var kv in Database.Multiedges)
{
this.ProgressStep();
IntPair ip = kv.Key;
if (ip.x == ip.y) {
Anchor anchor = Database.Anchors[ip.x];
double offset = anchor.LeftAnchor;
foreach (PolyIntEdge intEdge in kv.Value) {
ProgressStep();
double dx = settings.NodeSeparation + settings.MinNodeWidth + offset;
double dy = anchor.BottomAnchor / 2;
Point p0 = anchor.Origin;
Point p1 = p0 + new Point(0, dy);
Point p2 = p0 + new Point(dx, dy);
Point p3 = p0 + new Point(dx, -dy);
Point p4 = p0 + new Point(0, -dy);
var s = new Site(p0);
var polyline = new SmoothedPolyline(s);
s = new Site(s, p1);
s = new Site(s, p2);
s = new Site(s, p3);
s = new Site(s, p4);
new Site(s, p0);
Curve c;
intEdge.Curve = c = polyline.CreateCurve();
intEdge.Edge.UnderlyingPolyline = polyline;
offset = dx;
if (intEdge.Edge.Label != null) {
offset += intEdge.Edge.Label.Width;
Point center =
intEdge.Edge.Label.Center =
new Point(c[(c.ParStart + c.ParEnd) / 2].X + intEdge.LabelWidth / 2, anchor.Y);
var del = new Point(intEdge.Edge.Label.Width / 2, intEdge.Edge.Label.Height / 2);
var box = new Rectangle(center + del, center - del);
intEdge.Edge.Label.BoundingBox = box;
}
Arrowheads.TrimSplineAndCalculateArrowheads(intEdge.Edge.EdgeGeometry,
intEdge.Edge.Source.BoundaryCurve,
intEdge.Edge.Target.BoundaryCurve, c, false,
settings.EdgeRoutingSettings.KeepOriginalSpline);
}
}
}
}
static void RouteClusterParentInEdges(List<Edge> inParentEdges, EdgeRoutingSettings edgeRoutingSettings, Cluster cluster,
double padding) {
foreach (var e in cluster.InEdges.Where(e => IsDescendant(e.Source, cluster))) {
double ePadding = Math.Max(padding, 1.5 * ArrowlengthAtTarget(e));
var hookPort = e.TargetPort as HookUpAnywhereFromInsidePort;
if (hookPort == null)
e.TargetPort = hookPort = new HookUpAnywhereFromInsidePort(() => cluster.BoundaryCurve);
hookPort.HookSize = ePadding;
e.Curve = StraightLineEdges.CreateLoop(e.Source.BoundingBox, cluster.BoundingBox, ePadding, false);
Arrowheads.TrimSplineAndCalculateArrowheads(e, e.Curve, false,
edgeRoutingSettings.KeepOriginalSpline);
inParentEdges.Add(e);
}
}
void RouteEdgeWithNoLabel(PolyIntEdge intEdge)
{
Node sourceNode = routing.IntGraph.Nodes[intEdge.Source];
Node targetNode = routing.IntGraph.Nodes[intEdge.Target];
var sourcePort = new FloatingPort(sourceNode.BoundaryCurve, sourceNode.Center);
var targetPort = new FloatingPort(targetNode.BoundaryCurve, targetNode.Center);
var eg = intEdge.Edge.EdgeGeometry;
SmoothedPolyline sp;
eg.Curve = interactiveEdgeRouter.RouteSplineFromPortToPortWhenTheWholeGraphIsReady(sourcePort, targetPort, true, out sp);
Arrowheads.TrimSplineAndCalculateArrowheads(eg, intEdge.Edge.Source.BoundaryCurve,
intEdge.Edge.Target.BoundaryCurve, eg.Curve, false);
intEdge.Edge.EdgeGeometry = eg;
}
void CreateEdgeCurve(DrawingEdge de, LayoutEdge le)
{
var a = de.SourceNode.GeometryNode.Center;
var b = de.TargetNode.GeometryNode.Center;
Site start, end, mids;
if (Source.Label == Target.Label)
{
start = new Site(a);
end = new Site(b);
var mid1 = de.SourceNode.GeometryNode.Center;
mid1.X += (de.SourceNode.GeometryNode.BoundingBox.Width / 3 * 2);
var mid2 = mid1;
mid1.Y -= de.SourceNode.GeometryNode.BoundingBox.Height / 2;
mid2.Y += de.SourceNode.GeometryNode.BoundingBox.Height / 2;
Site mid1s = new Site(mid1);
Site mid2s = new Site(mid2);
start.Next = mid1s;
mid1s.Previous = start;
mid1s.Next = mid2s;
mid2s.Previous = mid1s;
mid2s.Next = end;
end.Previous = mid2s;
}
else
{
start = new Site(a);
end = new Site(b);
mids = new Site(a * 0.5 + b * 0.5);
start.Next = mids;
mids.Previous = start;
mids.Next = end;
end.Previous = mids;
}
SmoothedPolyline polyline = new SmoothedPolyline(start);
le.UnderlyingPolyline = polyline;
le.Curve = polyline.CreateCurve();
if (Arrowheads.TrimSplineAndCalculateArrowheads(le, le.Curve, true, true) == false)
{
Arrowheads.CreateBigEnoughSpline(le);
}
}
Geometry DefiningSourceArrowHead()
{
if (Edge.GeometryEdge.EdgeGeometry.SourceArrowhead == null)
{
Edge.GeometryEdge.EdgeGeometry.SourceArrowhead = new Arrowhead {
Length = Edge.Attr.ArrowheadLength
};
var curve = Edge.GeometryEdge.UnderlyingPolyline.CreateCurve();
Arrowheads.TrimSplineAndCalculateArrowheads(Edge.GeometryEdge, curve, true, false);
}
var streamGeometry = new StreamGeometry();
using (StreamGeometryContext context = streamGeometry.Open()) {
AddArrow(context, Edge.GeometryEdge.Curve.Start, Edge.GeometryEdge.EdgeGeometry.SourceArrowhead.TipPosition, PathStrokeThickness, Edge.Attr.ArrowheadAtSource);
return(streamGeometry);
}
}
/// <summary>
/// creates an edge curve based only on the source and target geometry
/// </summary>
/// <param name="edge"></param>
public static void CreateSimpleEdgeCurveWithUnderlyingPolyline(Edge edge)
{
ValidateArg.IsNotNull(edge, "edge");
var a = edge.Source.Center;
var b = edge.Target.Center;
if (edge.Source == edge.Target)
{
var dx = 2.0 / 3 * edge.Source.BoundaryCurve.BoundingBox.Width;
var dy = edge.Source.BoundingBox.Height / 4;
edge.UnderlyingPolyline = CreateUnderlyingPolylineForSelfEdge(a, dx, dy);
edge.Curve = edge.UnderlyingPolyline.CreateCurve();
}
else
{
edge.UnderlyingPolyline = SmoothedPolyline.FromPoints(new[] { a, b });
edge.Curve = edge.UnderlyingPolyline.CreateCurve();
}
Arrowheads.TrimSplineAndCalculateArrowheads(edge.EdgeGeometry,
edge.Source.BoundaryCurve,
edge.Target.BoundaryCurve,
edge.Curve, false, false);
}
private static void CalculateArrowheads(EdgeGeometry edgeGeom)
{
Arrowheads.TrimSplineAndCalculateArrowheads(edgeGeom, edgeGeom.SourcePort.Curve, edgeGeom.TargetPort.Curve, edgeGeom.Curve, true, false);
}
private void SetEdgeText(string fromState, string toState, string label, Color color, EdgeStyle style, Arrowheads arrow, string otherParameters)
{
edgeTexts.Add(string.Format("{0} -> {1} [color={2},arrowhead={3},fontcolor={2},style={4},label=\"{5}\",decorate=false{6}]",
fromState.Replace(".", ""), toState.Replace(".", ""), color.ToString(), arrow.ToString(), style.ToString(), label, otherParameters));
}
public void SetEdge(string fromState, string toState, string label, Color color, EdgeStyle style, Arrowheads arrow)
{
this.SetEdgeText(fromState, toState, label, color, style, arrow, "");
}
public void SetEdge(string fromState, string toState, string label, Color color, EdgeStyle style, Arrowheads arrow, string otherParameters)
{
if (otherParameters.Length > 1 && otherParameters.Trim().Substring(0, 1) != ",")
{
otherParameters = "," + otherParameters;
}
this.SetEdgeText(fromState, toState, label, color, style, arrow, otherParameters);
}
