protected override bool OnADMInactivityTimeout(ArduinoDeviceManager adm, long msQuiet)
{
bool success = base.OnADMInactivityTimeout(adm, msQuiet);
String desc = String.Format("ADM (BDID={0}) @ {1} had not received a message in {2} ms. Clearing success = {3}", adm.PortAndNodeID, adm.BoardID, msQuiet, success);
_erdb.LogEvent(EngineRoomServiceDB.LogEventType.WARNING, "BBEngineRoom", desc);
return(success);
}
protected override void OnADMDevicesConnected(ArduinoDeviceManager adm, ADMMessage message)
{
base.OnADMDevicesConnected(adm, message);
if (Sampler.IsRunning)
{
_erdb.LogEvent(EngineRoomServiceDB.LogEventType.START, "Sampler", String.Format("Sampling started with timer interval of {0} for {1} subjects", Sampler.TimerInterval, Sampler.SubjectCount));
_timerStateLog.Start();
_timerMonitorEngineRoom.Start();
}
}
protected override bool CreateADMs()
{
Tracing?.TraceEvent(TraceEventType.Information, 0, "Adding ADM and devices...");
_adm = ArduinoDeviceManager.Create(ArduinoSerialConnection.BOARD_UNO, 115200, 64, 64);
//Add generic devices ... can be used for testing or aqcuiring new ir codes
_irr = new IRGenericReceiver("irr", "IRR", GENERIC_RECEIVER_PIN, _irdb);
//Add specific devices
_sstv = new IRSamsungTV("sstv", SSTV_TRANSMIT_PIN, _irdb);
_lght1 = new IRLGHomeTheater("lght1", LGHT1_TRANSMIT_PIN, _irdb);
_lght2 = new IRLGHomeTheater("lght2", LGHT2_TRANSMIT_PIN, _irdb);
_adm.AddDevices(_sstv, _lght1, _lght2);
AddADM(_adm);
return(true);
}
//React to data coming from ADM
protected override void HandleADMMessage(ADMMessage message, ArduinoDeviceManager adm)
{
ArduinoDevice dev;
EngineRoomMessageSchema schema = new EngineRoomMessageSchema(message);
switch (message.Type)
{
case MessageType.DATA:
if (message.Sender == null)
{
dev = adm.GetDeviceByBoardID(message.TargetID);
if (dev is DS18B20Array)
{
schema.AddDS18B20Array((DS18B20Array)dev);
foreach (var sensor in ((DS18B20Array)dev).ConnectedSensors)
{
//outputSampleData(sensor.Sampler.GetSubjectData(sensor));
if (Output2Console)
{
Console.WriteLine("------------------------------> Average temp {0}: {1}", sensor.ID, sensor.AverageTemperature);
}
}
}
if (dev is WaterTanks.FluidTank)
{
schema.AddWaterTanks(_waterTanks);
WaterTanks.FluidTank ft = ((WaterTanks.FluidTank)dev);
schema.AddWaterTank(ft);
if (Output2Console)
{
Console.WriteLine("****************>: Water Tank {0} distance / average distance / percent / percent full: {1} / {2} / {3} / {4}", ft.ID, ft.Distance, ft.AverageDistance, ft.Percentage, ft.PercentFull);
}
}
}
else
{
dev = adm.GetDevice(message.Sender);
if (dev == _pompaCelup)
{
schema.AddPump(_pompaCelup);
if (Output2Console)
{
Console.WriteLine("+++++++++++++++> Pump {0} {1}", dev.ID, _pompaCelup.IsOn);
}
}
if (dev == _pompaSolar)
{
schema.AddPump(_pompaSolar);
_erdb.LogEvent(_pompaSolar.IsOn ? EngineRoomServiceDB.LogEventType.ON : EngineRoomServiceDB.LogEventType.OFF, _pompaSolar.ID, "Pompa Solar");
if (Output2Console)
{
Console.WriteLine("+++++++++++++++> Pump {0} {1}", dev.ID, _pompaSolar.IsOn);
}
}
if (dev is Engine.OilSensorSwitch)
{
Engine.OilSensorSwitch os = (Engine.OilSensorSwitch)dev;
schema.AddOilSensor(os);
if (Output2Console)
{
Console.WriteLine("+++++++++++++++> Oil Sensor {0} {1}", os.ID, os.IsOn);
}
}
}
break;
case MessageType.COMMAND_RESPONSE:
dev = adm.GetDeviceByBoardID(message.TargetID);
if (dev is RPMCounter)
{
RPMCounter rpm = (RPMCounter)dev;
schema.AddRPM(rpm);
message.Type = MessageType.DATA; //change the type so that it's more meaingful for listeners...
//TODO: remove
if (Output2Console)
{
Console.WriteLine("===============================> RPM {0}: {1}", rpm.ID, rpm.AverageRPM);
}
}
break;
case MessageType.NOTIFICATION:
break;
case MessageType.CONFIGURE_RESPONSE:
dev = adm.GetDeviceByBoardID(message.TargetID);
if (dev is DS18B20Array)
{
Tracing?.TraceEvent(TraceEventType.Information, 0, "Temperature array {0} on board {1} configured {2} sensors on one wire pin {3}", dev.ID, adm.BoardID, ((DS18B20Array)dev).ConnectedSensors.Count, message.GetInt(DS18B20Array.PARAM_ONE_WIRE_PIN));
}
break;
case MessageType.PING_RESPONSE:
//Console.WriteLine("Ping received from {0} ... gives AI={1}, FM={2}, MS={3}", adm.BoardID, message.GetValue("AI"), message.GetValue("FM"), message.GetValue("MS")); ;
break;
case MessageType.ERROR:
try
{
_erdb.LogEvent(EngineRoomServiceDB.LogEventType.ERROR, message.HasValue("ErrorSource") ? message.GetString("ErrorSource") : adm.PortAndNodeID, message.Value);
} catch (Exception e)
{
Tracing?.TraceEvent(TraceEventType.Error, 0, e.Message);
}
break;
}
base.HandleADMMessage(message, adm);
}
protected override void AddADMDevices(ArduinoDeviceManager adm, ADMMessage message)
{
if (adm == null || adm.BoardID == 0)
{
Tracing?.TraceEvent(TraceEventType.Error, 0, "adm is null or does not have a BoardID value");
return;
}
adm.Tracing = Tracing;
DS18B20Array temp;
Engine engine;
RPMCounter rpm;
Engine.OilSensorSwitch oilSensor;
String desc;
switch (adm.BoardID)
{
case BOARD_ER1:
//Temperature array for all engines connected to a board
//Important!: this must come first as it disrupts subsequent messages if not first
temp = new DS18B20Array(4, "temp_arr");
temp.SampleInterval = TEMP_SAMPLE_INTERVAL;
temp.SampleSize = TEMP_SAMPLE_SIZE;
temp.AddSensor(INDUK_ID + "_temp");
temp.AddSensor(BANTU_ID + "_temp");
adm.AddDevice(temp);
//Pompa celup
_pompaCelup = new Pump(10, POMPA_CELUP_ID);
_pompaCelup.MaxOnDuration = 12 * 60; //raise an alarm if on for more than 15 minutes
_pompaCelup.Initialise(_erdb);
_pompaCelup.SampleInterval = REQUEST_STATE_INTERVAL;
_pompaCelup.SampleSize = 1;
adm.AddDevice(_pompaCelup);
//Pompa solar
_pompaSolar = new Pump(11, POMPA_SOLAR_ID);
_pompaSolar.MaxOnDuration = 15 * 60; //raise an alarm if on for more than 15 minutes
_pompaSolar.Initialise(_erdb);
_pompaSolar.SampleInterval = REQUEST_STATE_INTERVAL;
_pompaSolar.SampleSize = 1;
adm.AddDevice(_pompaSolar);
//Induk
rpm = new RPMCounter(5, INDUK_ID + "_rpm", "RPM");
rpm.SampleInterval = RPM_SAMPLE_INTERVAL;
rpm.SampleSize = RPM_SAMPLE_SIZE;
rpm.SamplingOptions = RPM_SAMPLING_OPTIONS;
rpm.Calibration = RPM_CALIBRATION_INDUK;
oilSensor = new Engine.OilSensorSwitch(8, INDUK_ID + "_oil");
oilSensor.SampleInterval = REQUEST_STATE_INTERVAL;
oilSensor.SampleSize = 1;
engine = new Engine(INDUK_ID, rpm, oilSensor, temp.GetSensor(INDUK_ID + "_temp"));
engine.Initialise(_erdb);
adm.AddDeviceGroup(engine);
//Bantu
rpm = new RPMCounter(6, BANTU_ID + "_rpm", "RPM");
rpm.SampleInterval = RPM_SAMPLE_INTERVAL;
rpm.SampleSize = RPM_SAMPLE_SIZE;
rpm.SamplingOptions = RPM_SAMPLING_OPTIONS;
rpm.Calibration = RPM_CALIBRATION_BANTU;
oilSensor = new Engine.OilSensorSwitch(9, BANTU_ID + "_oil");
oilSensor.SampleInterval = REQUEST_STATE_INTERVAL;
oilSensor.SampleSize = 1;
engine = new Engine(BANTU_ID, rpm, oilSensor, temp.GetSensor(BANTU_ID + "_temp"));
engine.Initialise(_erdb);
adm.AddDeviceGroup(engine);
break;
case BOARD_ER2:
//temperature array for all engines connected to a board
temp = new DS18B20Array(4, "temp_arr");
temp.SampleInterval = 2 * TEMP_SAMPLE_INTERVAL;
temp.SampleSize = TEMP_SAMPLE_SIZE;
temp.AddSensor(GENSET2_ID + "_temp");
temp.AddSensor(GENSET1_ID + "_temp");
adm.AddDevice(temp);
//genset 1
rpm = new RPMCounter(6, GENSET1_ID + "_rpm", "RPM");
rpm.SampleInterval = RPM_SAMPLE_INTERVAL;
rpm.SampleSize = RPM_SAMPLE_SIZE;
rpm.SamplingOptions = RPM_SAMPLING_OPTIONS;
rpm.Calibration = RPM_CALIBRATION_GENSET1;
oilSensor = new Engine.OilSensorSwitch(9, GENSET1_ID + "_oil");
oilSensor.SampleInterval = REQUEST_STATE_INTERVAL;
oilSensor.SampleSize = 1;
engine = new Engine(GENSET1_ID, rpm, oilSensor, temp.GetSensor(GENSET1_ID + "_temp"));
engine.Initialise(_erdb);
adm.AddDeviceGroup(engine);
//genset 2
rpm = new RPMCounter(5, GENSET2_ID + "_rpm", "RPM");
rpm.SampleInterval = RPM_SAMPLE_INTERVAL;
rpm.SampleSize = RPM_SAMPLE_SIZE;
rpm.SamplingOptions = RPM_SAMPLING_OPTIONS;
rpm.Calibration = RPM_CALIBRATION_GENSET2;
oilSensor = new Engine.OilSensorSwitch(8, GENSET2_ID + "_oil");
oilSensor.SampleInterval = REQUEST_STATE_INTERVAL;
oilSensor.SampleSize = 1;
engine = new Engine(GENSET2_ID, rpm, oilSensor, temp.GetSensor(GENSET2_ID + "_temp"));
engine.Initialise(_erdb);
adm.AddDeviceGroup(engine);
break;
case BOARD_ER3:
_waterTanks = new WaterTanks();
_waterTanks.AddTank("wt1", 4, 5, 1200, 28, 102);
_waterTanks.AddTank("wt2", 6, 7, 1100, 28, 110);
_waterTanks.AddTank("wt3", 8, 9, 1100, 28, 100);
_waterTanks.AddTank("wt4", 10, 11, 1100, 32, 100);
_waterTanks.Initialise(_erdb);
adm.AddDeviceGroup(_waterTanks);
break;
} //end board switch
}
