//----------------------------------------------------------------------------
//
// Function : ConfigureBoard
//
// Description : Configure sample rate, input, and trigger settings
//
//----------------------------------------------------------------------------
static public bool ConfigureBoard(IntPtr boardHandle)
{
UInt32 retCode;
// TODO: Specify the sample rate (in samples per second),
// and appropriate sample rate identifier
samplesPerSec = 1000000000.0;
UInt32 sampleRateId = AlazarAPI.SAMPLE_RATE_1000MSPS;
// TODO: Select clock parameters as required.
retCode =
AlazarAPI.AlazarSetCaptureClock(
boardHandle,
AlazarAPI.INTERNAL_CLOCK,
sampleRateId,
AlazarAPI.CLOCK_EDGE_RISING,
0
);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarSetCaptureClock failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Select channel A input parameters as required
retCode = AlazarAPI.AlazarInputControlEx(boardHandle,
AlazarAPI.CHANNEL_A,
AlazarAPI.DC_COUPLING,
AlazarAPI.INPUT_RANGE_PM_400_MV,
AlazarAPI.IMPEDANCE_50_OHM);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarInputControlEx failed -- " + AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Select channel B input parameters as required
retCode = AlazarAPI.AlazarInputControlEx(boardHandle,
AlazarAPI.CHANNEL_B,
AlazarAPI.DC_COUPLING,
AlazarAPI.INPUT_RANGE_PM_400_MV,
AlazarAPI.IMPEDANCE_50_OHM);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarInputControlEx failed -- " + AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Select trigger inputs and levels as required
retCode =
AlazarAPI.AlazarSetTriggerOperation(
boardHandle,
AlazarAPI.TRIG_ENGINE_OP_J,
AlazarAPI.TRIG_ENGINE_J,
AlazarAPI.TRIG_CHAN_A,
AlazarAPI.TRIGGER_SLOPE_POSITIVE,
150,
AlazarAPI.TRIG_ENGINE_K,
AlazarAPI.TRIG_DISABLE,
AlazarAPI.TRIGGER_SLOPE_POSITIVE,
128);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarSetTriggerOperation failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Select external trigger parameters as required
retCode =
AlazarAPI.AlazarSetExternalTrigger(
boardHandle,
AlazarAPI.DC_COUPLING,
AlazarAPI.ETR_TTL);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarSetExternalTrigger failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Set trigger delay as required.
double triggerDelay_sec = 0;
UInt32 triggerDelay_samples = (UInt32)(triggerDelay_sec * samplesPerSec + 0.5);
retCode =
AlazarAPI.AlazarSetTriggerDelay(
boardHandle,
triggerDelay_samples
);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarSetTriggerDelay failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Set trigger timeout as required.
// NOTE:
// The board will wait for a for this amount of time for a trigger event.
// If a trigger event does not arrive, then the board will automatically
// trigger. Set the trigger timeout value to 0 to force the board to wait
// forever for a trigger event.
//
// IMPORTANT:
// The trigger timeout value should be set to zero after appropriate
// trigger parameters have been determined, otherwise the
// board may trigger if the timeout interval expires before a
// hardware trigger event arrives.
double triggerTimeout_sec = 0;
UInt32 triggerTimeout_clocks = (UInt32)(triggerTimeout_sec / 10E-6 + 0.5);
retCode =
AlazarAPI.AlazarSetTriggerTimeOut(
boardHandle,
triggerTimeout_clocks
);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarSetTriggerTimeOut failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// TODO: Configure AUX I/O connector as required
retCode =
AlazarAPI.AlazarConfigureAuxIO(
boardHandle, AlazarAPI.AUX_OUT_TRIGGER, 0);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarConfigureAuxIO failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
return(true);
}
//----------------------------------------------------------------------------
//
// Function : Acquire data
//
// Description : Acquire data from board, optionally saving data to file.
//
//----------------------------------------------------------------------------
static public unsafe bool AcquireData(IntPtr boardHandle)
{
// There are no pre-trigger samples in NPT mode
UInt32 preTriggerSamples = 0;
// TODO: Select the number of post-trigger samples per record
UInt32 postTriggerSamples = 2048;
// TODO: Specify the number of records per DMA buffer
UInt32 recordsPerBuffer = 10;
UInt32 buffersPerAcquisition = 10;
UInt32 channelMask = AlazarAPI.CHANNEL_A | AlazarAPI.CHANNEL_B;
// TODO: Select if you wish to save the sample data to a file
bool saveData = false;
// Calculate the number of enabled channels from the channel mask
UInt32 channelCount = 0;
switch (channelMask)
{
case AlazarAPI.CHANNEL_A:
case AlazarAPI.CHANNEL_B:
channelCount = 1;
break;
case AlazarAPI.CHANNEL_A | AlazarAPI.CHANNEL_B:
channelCount = 2;
break;
default:
Console.WriteLine("Error: Invalid channel mask -- {0}", channelMask);
return(false);
}
// Get the sample size in bits, and the on-board memory size in samples per channel
Byte bitsPerSample;
UInt32 maxSamplesPerChannel;
UInt32 retCode = AlazarAPI.AlazarGetChannelInfo(boardHandle, &maxSamplesPerChannel, &bitsPerSample);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarGetChannelInfo failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
return(false);
}
// Calculate the size of each DMA buffer in bytes
UInt32 bytesPerSample = ((UInt32)bitsPerSample + 7) / 8;
UInt32 samplesPerRecord = preTriggerSamples + postTriggerSamples;
UInt32 bytesPerRecord = (bytesPerSample * samplesPerRecord);
UInt32 bytesPerBuffer = bytesPerRecord * recordsPerBuffer * channelCount;
FileStream fileStream = null;
bool success = true;
try
{
// Create a data file if required
if (saveData)
{
fileStream = File.Create(@"data.bin");
}
// Allocate memory for sample buffer
byte[] buffer = new byte[bytesPerBuffer];
// Cast byte array to short array
ByteToShortArray byteToShortArray = new ByteToShortArray();
byteToShortArray.bytes = buffer;
fixed(short *pBuffer = byteToShortArray.shorts)
{
// Configure the record size
retCode =
AlazarAPI.AlazarSetRecordSize(
boardHandle,
preTriggerSamples,
postTriggerSamples
);
if (retCode != AlazarAPI.ApiSuccess)
{
throw new System.Exception("Error: AlazarSetRecordSize failed -- " + AlazarAPI.AlazarErrorToText(retCode));
}
// Configure the board to make an NPT AutoDMA acquisition
UInt32 recordsPerAcquisition = recordsPerBuffer * buffersPerAcquisition;
retCode =
AlazarAPI.AlazarBeforeAsyncRead(
boardHandle,
channelMask,
-(int)preTriggerSamples,
samplesPerRecord,
recordsPerBuffer,
recordsPerAcquisition,
AlazarAPI.ADMA_EXTERNAL_STARTCAPTURE | AlazarAPI.ADMA_NPT | AlazarAPI.ADMA_FIFO_ONLY_STREAMING | AlazarAPI.ADMA_ALLOC_BUFFERS
);
if (retCode != AlazarAPI.ApiSuccess)
{
throw new System.Exception("Error: AlazarBeforeAsyncRead failed -- " + AlazarAPI.AlazarErrorToText(retCode));
}
// Arm the board to begin the acquisition
retCode = AlazarAPI.AlazarStartCapture(boardHandle);
if (retCode != AlazarAPI.ApiSuccess)
{
throw new System.Exception("Error: AlazarStartCapture failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
}
// Wait for each buffer to be filled, then process the buffer
Console.WriteLine("Capturing {0} buffers ... press any key to abort",
buffersPerAcquisition);
int startTickCount = System.Environment.TickCount;
UInt32 buffersCompleted = 0;
Int64 bytesTransferred = 0;
bool done = false;
while (!done)
{
// TODO: Set a buffer timeout that is longer than the time
// required to capture all the records in one buffer.
UInt32 timeout_ms = 5000;
// Wait for a buffer to be filled by the board.
retCode = AlazarAPI.AlazarWaitNextAsyncBufferComplete(boardHandle, pBuffer, bytesPerBuffer, timeout_ms);
if (retCode == AlazarAPI.ApiSuccess)
{
// This buffer is full, but there are more buffers in the acquisition.
}
else if (retCode == AlazarAPI.ApiTransferComplete)
{
// This buffer is full, and it's the last buffer of the acqusition.
done = true;
}
else
{
throw new System.Exception("Error: AlazarWaitNextAsyncBufferComplete failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
}
buffersCompleted++;
bytesTransferred += bytesPerBuffer;
// TODO: Process sample data in this buffer.
// NOTE:
//
// While you are processing this buffer, the board is already
// filling the next available buffer(s).
//
// You MUST finish processing this buffer and post it back to the
// board before the board fills all of the available DMA buffers,
// and its on-board memory.
//
// Samples are arranged in the buffer as follows: S0A, S0B, ..., S1A, S1B, ...
// with SXY the sample number X of channel Y.
//
// A 12-bit sample code is stored in the most significant bits
// of
// in each 16-bit sample value.
//
// Sample codes are unsigned by default. As a result:
// - a sample code of 0x0000 represents a negative full scale
// input signal.
// - a sample code of 0x8000 represents a ~0V signal.
// - a sample code of 0xFFFF represents a positive full scale
// input signal.
if (saveData)
{
// Write record to file
fileStream.Write(buffer, 0, (int)bytesPerBuffer);
}
// If a key was pressed, exit the acquisition loop
if (Console.KeyAvailable == true)
{
Console.WriteLine("Aborted...");
done = true;
}
if (buffersCompleted >= buffersPerAcquisition)
{
done = true;
}
// Display progress
Console.Write("Completed {0} buffers\r", buffersCompleted);
}
// Display results
double transferTime_sec = ((double)(System.Environment.TickCount - startTickCount)) / 1000;
Console.WriteLine("Capture completed in {0:N3} sec", transferTime_sec);
UInt32 recordsTransferred = recordsPerBuffer * buffersCompleted;
double buffersPerSec;
double bytesPerSec;
double recordsPerSec;
if (transferTime_sec > 0)
{
buffersPerSec = buffersCompleted / transferTime_sec;
bytesPerSec = bytesTransferred / transferTime_sec;
recordsPerSec = recordsTransferred / transferTime_sec;
}
else
{
buffersPerSec = 0;
bytesPerSec = 0;
recordsPerSec = 0;
}
Console.WriteLine("Captured {0} buffers ({1:G4} buffers per sec)", buffersCompleted, buffersPerSec);
Console.WriteLine("Captured {0} records ({1:G4} records per sec)", recordsTransferred, recordsPerSec);
Console.WriteLine("Transferred {0} bytes ({1:G4} bytes per sec)", bytesTransferred, bytesPerSec);
}
}
catch (Exception exception)
{
Console.WriteLine(exception.ToString());
success = false;
}
finally
{
// Close the data file
if (fileStream != null)
{
fileStream.Close();
}
// Abort the acquisition
retCode = AlazarAPI.AlazarAbortAsyncRead(boardHandle);
if (retCode != AlazarAPI.ApiSuccess)
{
Console.WriteLine("Error: AlazarAbortAsyncRead failed -- " +
AlazarAPI.AlazarErrorToText(retCode));
}
}
return(success);
}