/// <summary>
/// 返回数值
/// </summary>
/// <param name="command"></param>
/// <returns></returns>
public virtual double VisaRead_double(string command)
{
double dtmp;
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
if (_ViError != 0)
{
OnchildThreadException("error:" + _InstrNick + _InstrAddr);
}
string res = "";
try
{
AgVisa32.viRead(_Session, out res, 15);
//string[] resa = res.Split(',');
//res = resa[0];
dtmp = double.Parse(res);
return(dtmp);
}
catch (Exception)
{
OnchildThreadException("error:" + _InstrNick + "：数据采集失败");
return(0);
}
}
/// <summary>
/// Get the specified attribute
/// </summary>
/// <param name="attribute"></param>
/// <returns></returns>
public int GetSessionAttribute(int attribute)
{
int value;
CheckStatus(AgVisa32.viGetAttribute(mSession, attribute, out value));
return(value);
}
/// <summary>
/// This operation reads an 16-bit value from the address location specified in addr. The address
/// must be a valid memory address in the current process mapped by a previous MapAddress() call.
/// </summary>
/// <param name="addr">Specifies the source address to read the value.</param>
/// <returns></returns>
public short Peek16(IntPtr addr)
{
short value;
AgVisa32.viPeek16(mSession, addr, out value);
return(value);
}
/// <summary>
/// This operation reads an 32-bit value from the address location specified in addr. The address
/// must be a valid memory address in the current process mapped by a previous MapAddress() call.
/// </summary>
/// <param name="addr">Specifies the source address to read the value.</param>
/// <returns></returns>
public long Peek64(IntPtr addr)
{
long value;
AgVisa32.viPeek64(mSession, addr, out value);
return(value);
}
/// <summary>
/// This operation reads an 32-bit value from the address location specified in addr. The address
/// must be a valid memory address in the current process mapped by a previous MapAddress() call.
/// </summary>
/// <param name="addr">Specifies the source address to read the value.</param>
/// <returns></returns>
public int Peek32(IntPtr addr)
{
int value;
AgVisa32.viPeek32(mSession, addr, out value);
return(value);
}
public override double[] VisaReads(string command)
{
double[] dtmp;
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
if (_ViError != 0)
{
OnchildThreadException("error:" + _InstrNick + _InstrAddr);
}
string res = "";
AgVisa32.viRead(_Session, out res, 100000);
string[] tmp = res.Split(',');
dtmp = new double[tmp.Length];
try
{
for (int i = 0; i < tmp.Length; i++)
{
dtmp[i] = double.Parse(tmp[i]);
}
}
catch
{
Console.WriteLine();
}
return(dtmp);
}
/// <summary>
/// Lock the underlying driver.
///
/// If the underlying driver requires a "key" (such as VISA's viLock()), use the
/// value returned by LockSession() of the first session locked. If this is the
/// first call to LockSession for this shared session, the value is the suggested
/// value for the key (but the implementation may ignore this and return a
/// different value).
/// </summary>
/// <param name="exclusive">true (VI_EXCLUSIVE_LOCK), false (VI_SHARED_LOCK)</param>
/// <param name="timeout">timeout in ms ... not all drivers/sessions use this</param>
/// <param name="key">"authorization" to lock this visa session.</param>
/// <returns>authorization for other calls to LockSession of a shared session</returns>
public string LockSession(bool exclusive, int timeout, string key)
{
// If not open, report an error...
if (mSession == 0)
{
throw new IOException("Cannot lock a closed VisaSession.");
}
const int VI_ERROR_TMO = -1073807339; // = 0xBFFF0015
const int VI_ERROR_RSRC_LOCKED = -1073807345; // = 0xBFFF000F
StringBuilder buffer = new StringBuilder(256);
int error = AgVisa32.viLock(mSession,
(exclusive) ? AgVisa32.VI_EXCLUSIVE_LOCK : AgVisa32.VI_SHARED_LOCK,
timeout,
key,
buffer);
if (error < 0)
{
// If someone else has this locked, we get a timeout ... "translate"
// that error into "resource locked"
if (error == VI_ERROR_TMO)
{
error = VI_ERROR_RSRC_LOCKED;
}
AgVisa32Exception.Throw(error);
}
IsSessionLocked = true;
return(buffer.ToString());
}
public static double ReadDB(string addr, string window, string m1)
{
int resourceManager = 0, viError;
int session = 0;
viError = AgVisa32.viOpenDefaultRM(out resourceManager);
viError = AgVisa32.viOpen(resourceManager, addr.ToString(),
AgVisa32.VI_NO_LOCK, AgVisa32.VI_TMO_IMMEDIATE, out session);
System.Threading.Thread.Sleep(100);
viError = AgVisa32.viPrintf(session, "CALC:PAR:SEL '" + window + "'" + "\n");
viError = AgVisa32.viPrintf(session, "CALC:" + m1 + ":Y?" + "\n");
string res = "";
AgVisa32.viRead(session, out res, 100);
System.Threading.Thread.Sleep(100);
AgVisa32.viClose(session);
AgVisa32.viClose(resourceManager);
double dtmp = double.Parse(res.ToString().Split(',')[0]);
return(dtmp);
}
/// <summary>
/// 返回数组
/// </summary>
/// <param name="command"></param>
/// <returns></returns>
public virtual double[] VisaReads(string command)
{
double[] dtmp;
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
string res = "";
AgVisa32.viRead(_Session, out res, 1000000);
string[] tmp = res.Split(',');
dtmp = new double[tmp.Length];
try
{
for (int i = 0; i < tmp.Length; i++)
{
dtmp[i] = double.Parse(tmp[i]);
}
}
catch
{
Console.WriteLine();
}
return(dtmp);
}
/// <summary>
/// 返回数组
/// </summary>
/// <param name="command"></param>
/// <returns></returns>
public virtual double[] VisaReads(string command)
{
double[] dtmp;
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
if (_ViError != 0)
{
OnchildThreadException("error:" + _InstrNick + _InstrAddr);
}
string res = "";
AgVisa32.viRead(_Session, out res, 8020);
string[] tmp = res.Split(',');
dtmp = new double[tmp.Length];
for (int i = 0; i < tmp.Length; i++)
{
dtmp[i] = double.Parse(tmp[i]);
}
return(dtmp);
}
/// <summary>
/// This operation reads an 8-bit value from the address location specified in addr. The address
/// must be a valid memory address in the current process mapped by a previous MapAddress() call.
/// </summary>
/// <param name="addr">Specifies the source address to read the value.</param>
/// <returns></returns>
public byte Peek8(IntPtr addr)
{
byte value;
AgVisa32.viPeek8(mSession, addr, out value);
return(value);
}
/// <summary>
/// 返回字符串结果
/// </summary>
/// <param name="command"></param>
/// <returns></returns>
public virtual string VisaRead(string command)
{
_ViError = AgVisa32.viPrintf(_Session, command + "\r\n");
if (_ViError != 0)
{
OnchildThreadException("error:" + _InstrNick + _InstrAddr);
}
string res = "";
Thread.Sleep(100);
try
{
AgVisa32.viRead(_Session, out res, 15);
//string[] resa = res.Split(',');
//res = resa[0];
double dtmp = double.Parse(res);
return(dtmp.ToString("f2"));
}
catch (Exception)
{
OnchildThreadException("error:" + _InstrNick + "：数据采集失败");
return("");
}
}
public string VisaRead_STR(string command)
{
viError = AgVisa32.viPrintf(session, command + "\n");
string res = "";
AgVisa32.viRead(session, out res, 100);
return(res);
}
public void VisaWrite(string command)
{
viError = AgVisa32.viPrintf(session, command + "\n");
if (viError != 0)
{
throw new Exception("仪表连接错误！");
}
}
/// <summary>
/// 发送SCPI指令
/// </summary>
/// <param name="command"></param>
public virtual void VisaWrite(string command)
{
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
if (_ViError != 0)
{
throw new Exception("仪表连接错误！");
}
}
/// <summary>
/// 发送SCPI指令
/// </summary>
/// <param name="command"></param>
public virtual void VisaWrite(string command)
{
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
if (_ViError != 0)
{
OnchildThreadException("error:" + _InstrNick + _InstrAddr);
}
}
public void Out64(short bar, long barOffset, Int64 writeValue)
{
int error = AgVisa32.viOut64(mSession, bar, (int)barOffset, writeValue);
if (error < 0)
{
AgVisa32Exception.Throw(error);
}
}
/// <summary>
/// This operation maps in a specified memory space. The memory space that is mapped is dependent on the
/// mapSpace (refer to the following table) parameter. The address parameter returns the address in your
/// process space where memory is mapped.
///
/// Value Description
/// ------------ -------------------------
/// VI_A16_SPACE Map the A16 address space of VXI/MXI bus.
/// VI_A24_SPACE Map the A24 address space of VXI/MXI bus.
/// VI_A32_SPACE Map the A32 address space of VXI/MXI bus.
/// VI_A64_SPACE Map the A64 address space of VXI/MXI bus.
/// VI_PXI_CFG_SPACE Address the PCI configuration space.
/// VI_PXI_BAR0_SPACE – VI_PXI_BAR5_SPACE Address the specified PCI memory or I/O space.
/// VI_PXI_ALLOC_SPACE Access physical locally allocated memory
/// </summary>
/// <param name="mapSpace">Specifies the address space to map. </param>
/// <param name="mapOffset">Offset (in bytes) of the memory to be mapped.</param>
/// <param name="mapSize">Amount of memory to map (in bytes).</param>
/// <param name="accMode">VI_FALSE</param>
/// <param name="suggested">If suggested parameter is not VI_NULL, the operating system attempts to map
/// the memory to the address specified in suggested. There is no guarantee,
/// however, that the memory will be mapped to that address. This operation
/// may map the memory into an address region different from suggested.</param>
/// <param name="address">Address in your process space where the memory was mapped.</param>
public void MapAddress(short mapSpace,
int mapOffset,
int mapSize,
short accMode,
IntPtr suggested,
out IntPtr address)
{
CheckStatus(AgVisa32.viMapAddress(mSession, mapSpace, mapOffset, mapSize, accMode, suggested, out address));
}
public void EnableEvent(VisaEvents eventType, EventMechanism mechanism)
{
//error = AgVisa32.viEnableEvent(mSession, (short)eventType, (short)mechanism, 0);
//error = AgVisa32.viEnableEvent(mSession, AgVisa32.VI_EVENT_PXI_INTR,
// AgVisa32.VI_HNDLR, 0);
//error = AgVisa32.viEnableEvent(mSession, AgVisa32.VI_EVENT_PXI_INTR,
// (short)mechanism, 0);
CheckStatus(AgVisa32.viEnableEvent(mSession, (int)eventType, (short)mechanism, 0));
}
/// <summary>
/// 发送多条SCPI指令
/// </summary>
/// <param name="command"></param>
public virtual void VisaAllWrite(string[] commands)
{
for (int i = 0; i < commands.Length; i++)
{
_ViError = AgVisa32.viPrintf(_Session, commands[i] + "\n");
if (_ViError != 0)
{
throw new Exception("仪表连接错误！");
}
}
}
/// <summary>
/// 发送多条SCPI指令
/// </summary>
/// <param name="command"></param>
public virtual void VisaAllWrite(string[] commands)
{
for (int i = 0; i < commands.Length; i++)
{
_ViError = AgVisa32.viPrintf(_Session, commands[i] + "\n");
if (_ViError != 0)
{
OnchildThreadException("error:" + _InstrNick + _InstrAddr);
}
}
}
public void WaitOnEvent(VisaEvents eventType, int timeout)
{
int outeventtype = 0;
int outeventcontext = 0;
CheckStatus(AgVisa32.viWaitOnEvent(mSession,
(int)eventType,
timeout,
ref outeventtype,
ref outeventcontext));
}
/// <summary>
/// Perform an output
/// </summary>
/// <param name="BAR"></param>
/// <param name="offset"></param>
/// <param name="value"></param>
public void Out32(short BAR, int offset, Int32 value)
{
if (IsSimulated)
{
// For now, trivial implementation of simulation ... simply cache the value
mSimulatedRegisters[offset] = value;
return;
}
CheckStatus(AgVisa32.viOut32(mSession, BAR, offset, value));
}
/// <summary>
/// 返回绝对值结果
/// </summary>
/// <param name="command"></param>
/// <returns></returns>
public virtual string VisaRead_Abs(string command)
{
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
string res = "";
AgVisa32.viRead(_Session, out res, 10000);
string[] resa = res.Split(',');
res = resa[0];
double dtmp = Math.Abs(double.Parse(res));
return(dtmp.ToString("f1"));
}
public override string VisaRead(string command)
{
string res = "";
_ViError = AgVisa32.viPrintf(_Session, command + "\n");
AgVisa32.viRead(_Session, out res, 1000);
double dtmp = double.Parse(res) * 1000;
return(dtmp.ToString("f0"));
}
/// <summary>
/// Open the underlying driver (VISA, Eiger, whatever)
///
/// If you need a shared session (VI_SHARED_LOCK), call Open() with exclusive==false then call LockSession.
/// </summary>
/// <param name="resource">the VISA resource descriptor. Ignored if simulated is true</param>
/// <param name="timeout">I/O timeout in ms ... not all drivers/sessions use this</param>
/// <param name="simulated">if true, no connection to hardware will be made</param>
/// <param name="exclusive">if true opens session exclusively (VI_EXCLUSIVE_LOCK). if false opens session with no lock (VI_NO_LOCK)</param>
public void Open(string resource, int timeout, bool simulated, bool exclusive)
{
// If already open, report an error...
if (IsSimulated || mSession != 0)
{
throw new IOException("VisaSession is already open");
}
mViDesc = resource;
mTimeout = timeout;
// Cache the resource descriptor -- may be used to open additional sessions to the same resource
ResourceDescriptor = resource;
Timeout = timeout;
mDefaultTimeout = timeout;
if (simulated)
{
// NOTE: if you want control of these values, use MockSession
IsSimulated = true;
mSlot = 1;
mModelCode = 0x1234;
mModelName = resource;
mSession = resource.GetHashCode();
return;
}
// Make sure cached values are cleared
mSlot = -1;
mModelCode = -1;
mModelName = string.Empty;
CheckStatus(AgVisa32.viOpen(
mResourceManager,
resource,
(exclusive) ? AgVisa32.VI_EXCLUSIVE_LOCK : AgVisa32.VI_NO_LOCK,
timeout,
out mSession));
// Cache the locked status
IsSessionLocked = exclusive;
// Use the supplied timeout as the default timeout for I/O operations
CheckStatus(AgVisa32.viSetAttribute(mSession, AgVisa32.VI_ATTR_TMO_VALUE, timeout));
// NOTE: DMA default settings ... For Agilent IOLS 16.3.16603 these are
// VI_ATTR_DMA_ALLOW_EN 0
// VI_ATTR_SRC_INCREMENT 1
// VI_ATTR_DEST_INCREMENT 1
// VI_AGATTR_DMA_WRITE_THRESHOLD 512
// VI_AGATTR_DMA_READ_THRESHOLD 48
// VI_AGATTR_DMA_CHANNEL -1
}
public Int64 In64(short bar, long barOffset)
{
Int64 readval;
int error = AgVisa32.viIn64(mSession, bar, (int)barOffset, out readval);
if (error < 0)
{
AgVisa32Exception.Throw(error);
}
return(readval);
}
public override void VisaAllWrite(string[] commands)
{
for (int i = 0; i < commands.Length; i++)
{
//增加10毫秒延迟
Thread.Sleep(10);
base._ViError = AgVisa32.viPrintf(base._Session, commands[i] + "\n");
if (base._ViError != 0)
{
throw new Exception("仪表连接错误！");
}
}
}
public void MoveOut8(short bar, long barOffset, int length, Byte[] dataArray)
{
int error = AgVisa32.viMoveOut8(mSession,
bar,
(int)barOffset,
length,
dataArray);
if (error < 0)
{
AgVisa32Exception.Throw(error);
}
}
public void MoveIn32(short bar, long barOffset, Int32[] data, int numToRead)
{
int error = AgVisa32.viMoveIn32(mSession,
bar,
(int)barOffset,
numToRead,
data);
if (error < 0)
{
AgVisa32Exception.Throw(error);
}
}