private double method_0(ngeometry.VectorGeometry.Vector3d vector3d_0, ngeometry.VectorGeometry.Vector3d vector3d_1)
{
double num = ngeometry.VectorGeometry.Vector3d.Angle(vector3d_0, vector3d_1);
ngeometry.VectorGeometry.Vector3d b = ngeometry.VectorGeometry.Vector3d.Bisector(vector3d_0, vector3d_1);
double num2 = ngeometry.VectorGeometry.Vector3d.Angle(vector3d_0, b);
double num3 = ngeometry.VectorGeometry.Vector3d.OrientedAngle(vector3d_0, vector3d_1, ngeometry.VectorGeometry.Vector3d.Cross(vector3d_0, vector3d_1));
if (num3 > 3.1415926535897931)
{
num3 = 6.2831853071795862 - num3;
}
if (num > num2)
{
if (Math.Abs(num3 - num) > 0.001)
{
throw new System.Exception();
}
return(num);
}
else
{
if (Math.Abs(num3 - num2) > 0.001)
{
throw new System.Exception();
}
return(num2);
}
}
public static ngeometry.VectorGeometry.Ellipse ToCeometricEllipse(Autodesk.AutoCAD.DatabaseServices.Ellipse dbe)
{
ngeometry.VectorGeometry.Point center = new ngeometry.VectorGeometry.Point(dbe.Center.X, dbe.Center.Y, dbe.Center.Z);
ngeometry.VectorGeometry.Vector3d semimajorAxis = new ngeometry.VectorGeometry.Vector3d(dbe.MajorAxis.X, dbe.MajorAxis.Y, dbe.MajorAxis.Z);
ngeometry.VectorGeometry.Vector3d semiminorAxis = new ngeometry.VectorGeometry.Vector3d(dbe.MinorAxis.X, dbe.MinorAxis.Y, dbe.MinorAxis.Z);
return(new ngeometry.VectorGeometry.Ellipse(center, semimajorAxis, semiminorAxis));
}
public static PointSet SubdivideLine(Autodesk.AutoCAD.DatabaseServices.Line dbl, double d)
{
PointSet result;
try
{
PointSet pointSet = new PointSet();
ngeometry.VectorGeometry.Point point = new ngeometry.VectorGeometry.Point(dbl.StartPoint.X, dbl.StartPoint.Y, dbl.StartPoint.Z);
ngeometry.VectorGeometry.Point point2 = new ngeometry.VectorGeometry.Point(dbl.EndPoint.X, dbl.EndPoint.Y, dbl.EndPoint.Z);
double num = point.DistanceTo(point2);
int num2 = Math.Max((int)Math.Ceiling(num / d), 1);
ngeometry.VectorGeometry.Vector3d vector = point2.method_2() - point.method_2();
for (int i = 0; i <= num2; i++)
{
double scalar = (double)i / (double)num2;
pointSet.Add(new Point(point.method_2() + scalar * vector));
}
result = pointSet;
}
catch (System.Exception ex)
{
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.WriteMessage("Can not subdivide line (handle: " + dbl.Handle.ToString() + ")\n");
result = null;
}
return(result);
}
public static CoordinateSystem GetCeometricUcs()
{
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
Autodesk.AutoCAD.Geometry.Matrix3d currentUserCoordinateSystem = editor.CurrentUserCoordinateSystem;
Point3d origin = currentUserCoordinateSystem.CoordinateSystem3d.Origin;
Autodesk.AutoCAD.Geometry.Vector3d xaxis = currentUserCoordinateSystem.CoordinateSystem3d.Xaxis;
Autodesk.AutoCAD.Geometry.Vector3d yaxis = currentUserCoordinateSystem.CoordinateSystem3d.Yaxis;
Autodesk.AutoCAD.Geometry.Vector3d zaxis = currentUserCoordinateSystem.CoordinateSystem3d.Zaxis;
ngeometry.VectorGeometry.Point originPoint = new ngeometry.VectorGeometry.Point(origin.X, origin.Y, origin.Z);
ngeometry.VectorGeometry.Vector3d e = new ngeometry.VectorGeometry.Vector3d(xaxis.X, xaxis.Y, xaxis.Z);
ngeometry.VectorGeometry.Vector3d e2 = new ngeometry.VectorGeometry.Vector3d(yaxis.X, yaxis.Y, yaxis.Z);
ngeometry.VectorGeometry.Vector3d e3 = new ngeometry.VectorGeometry.Vector3d(zaxis.X, zaxis.Y, zaxis.Z);
return(new ngeometry.VectorGeometry.CoordinateSystem(originPoint, e, e2, e3));
}
public void ProjectPointsCommand()
{
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
try
{
//LicenseManager.CheckValid("FULL");
ObjectId[] objectId_ = CommandLineQuerries.SelectFaces(true);
PointProjection.string_0 = CommandLineQuerries.SpecifyRasterBySelectionOrByLayer(PointProjection.string_0);
ObjectId[] array = null;
if (PointProjection.string_0 == "S")
{
array = CommandLineQuerries.SelectPoints(true);
}
else if (PointProjection.string_0 == "L")
{
PointProjection.string_1 = CommandLineQuerries.SpecifyLayerName(PointProjection.string_1);
if (!DBManager.ExistsLayer(PointProjection.string_1))
{
throw new ArgumentException("Layer does not exist.");
}
array = DBManager.GetPointsOnLayer(PointProjection.string_1);
if (array == null)
{
throw new ArgumentException("No points selected.");
}
editor.WriteMessage(Environment.NewLine + array.Length + " points selected.");
}
PointProjection.string_4 = CommandLineQuerries.SpecifyProjectionDirection(PointProjection.string_4);
ngeometry.VectorGeometry.Vector3d normalVector = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
string a;
if ((a = PointProjection.string_4.ToUpper()) != null)
{
if (!(a == "X"))
{
if (!(a == "Y"))
{
if (!(a == "Z"))
{
if (!(a == "U"))
{
if (!(a == "2P"))
{
goto IL_1E6;
}
normalVector = CommandLineQuerries.Specify2PDirection().BasisVector[2].Normalize();
}
else
{
normalVector = Conversions.GetUCS().BasisVector[2].Normalize();
}
}
else
{
normalVector = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
}
}
else
{
normalVector = new ngeometry.VectorGeometry.Vector3d(0.0, 1.0, 0.0);
}
}
else
{
normalVector = new ngeometry.VectorGeometry.Vector3d(1.0, 0.0, 0.0);
}
Point point = new Point(0.0, 0.0, 0.0);
ngeometry.VectorGeometry.Plane plane = new ngeometry.VectorGeometry.Plane(point, normalVector);
CoordinateSystem coordinateSystem_ = new CoordinateSystem(plane);
PointProjection.string_3 = CommandLineQuerries.InsertOnLayer_Current_Face_Point(PointProjection.string_3);
PointProjection.string_2 = CommandLineQuerries.KeywordYesNo("Delete original points", PointProjection.string_2, false, false);
PointProjection.string_5 = CommandLineQuerries.KeepIfMultiple(PointProjection.string_5);
this.method_0(array, objectId_, coordinateSystem_);
return;
}
IL_1E6:
throw new System.Exception("Invalid option keyword.");
}
catch (System.Exception ex)
{
editor.WriteMessage("\n" + ex.Message + "\n");
}
}
public List <Point> DevelopPolyline(ObjectId plineID, bool reverse, double startBGL, double endBGL)
{
Database workingDatabase = HostApplicationServices.WorkingDatabase;
PointSet pointSet = new PointSet();
using (Transaction transaction = workingDatabase.TransactionManager.StartTransaction())
{
DBObject @object = transaction.GetObject(plineID, (OpenMode)0, true);
pointSet = PointGeneration.SubdividePolyline(@object, transaction, 0.0);
}
if (reverse)
{
pointSet.Reverse();
}
PointSet pointSet2 = new PointSet();
double num = 0.0;
double num2 = 0.0;
double num3 = 0.0;
for (int i = 0; i < pointSet.Count - 1; i++)
{
double num4 = pointSet[i].DistanceTo(pointSet[i + 1]);
double num5 = pointSet[i].DistanceXY(pointSet[i + 1]);
if (startBGL >= num && startBGL < num + num4)
{
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(pointSet[i + 1] - pointSet[i]);
vector3d.Norm = Math.Abs(startBGL - num);
pointSet2.Add(pointSet[i] + vector3d.ToPoint());
num3 = num2 + pointSet[i].DistanceXY(pointSet[i] + vector3d.ToPoint());
}
if (num > startBGL && num < endBGL)
{
pointSet2.Add(pointSet[i]);
}
if (endBGL > num && endBGL <= num + num4)
{
ngeometry.VectorGeometry.Vector3d vector3d2 = new ngeometry.VectorGeometry.Vector3d(pointSet[i + 1] - pointSet[i]);
vector3d2.Norm = Math.Abs(endBGL - num);
pointSet2.Add(pointSet[i] + vector3d2.ToPoint());
}
num += num4;
num2 += num5;
}
if (endBGL > num)
{
pointSet2.Add(pointSet[pointSet.Count - 1]);
}
PointSet pointSet3 = new PointSet();
double num6 = num3;
for (int j = 0; j < pointSet2.Count; j++)
{
pointSet3.Add(new Point(num6, CMD_Development.double_2 * pointSet2[j].Z, 0.0));
if (j == pointSet2.Count - 1)
{
break;
}
num6 += pointSet2[j].DistanceXY(pointSet2[j + 1]);
}
return(pointSet3.ToList());
}
private void method_0(ObjectId[] objectId_0, ProgressMeter progressMeter_0, CoordinateSystem coordinateSystem_0)
{
Database workingDatabase = HostApplicationServices.WorkingDatabase;
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
List <Solid3d> list = new List <Solid3d>();
double epsilon = Convert.ToDouble(CMD_FacesToSolid.string_2);
bool flag = true;
if (CMD_FacesToSolid.string_0 == "N")
{
flag = false;
}
DBManager.SetEpsilon();
List <Triangle> list2 = Conversions.ToCeometricAcDbTriangleList(objectId_0);
if (!Conversions.IsWCS(coordinateSystem_0))
{
Triangle.TransformCoordinates(list2, CoordinateSystem.Global(), coordinateSystem_0);
}
list2.Sort(new Triangle.CompareMinX());
int num = 0;
double num2 = -1.7976931348623157E+308;
double num3 = -1.7976931348623157E+308;
double num4 = 1.7976931348623157E+308;
double num5 = 1.7976931348623157E+308;
for (int i = list2.Count - 1; i >= 0; i--)
{
if (list2[i].NormalVector.IsOrthogonalTo(new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0)))
{
list2.RemoveAt(i);
num++;
}
else
{
double minimumX = list2[i].MinimumX;
if (minimumX < num4)
{
num4 = minimumX;
}
double maximumX = list2[i].MaximumX;
if (maximumX > num2)
{
num2 = maximumX;
}
double minimumY = list2[i].MinimumY;
if (minimumY < num5)
{
num5 = minimumY;
}
double maximumY = list2[i].MaximumY;
if (maximumY > num3)
{
num3 = maximumY;
}
}
}
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(0.5 * (num4 + num2), 0.5 * (num5 + num3), 0.0);
double num6 = 0.5 * Math.Max(Math.Abs(num2 - num4), Math.Abs(num3 - num5));
double num7 = Math.Ceiling(100000.0 / num6);
for (int j = 0; j < list2.Count; j++)
{
list2[j] = list2[j].Move(-1.0 * vector3d);
}
SubDMeshHandler subDMeshHandler = new SubDMeshHandler(list2);
subDMeshHandler.BuildDataStructure(false);
int k = 2147483647;
while (k > 0)
{
this.messageFilter_0.CheckMessageFilter();
k = subDMeshHandler.HealXY(epsilon);
num += k;
}
editor.WriteMessage("\nDegenerate projections healed: " + num);
Autodesk.AutoCAD.Geometry.Matrix3d matrix3d = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(num7, new Point3d(0.0, 0.0, 0.0));
Autodesk.AutoCAD.Geometry.Matrix3d matrix3d2 = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(1.0 / num7, new Point3d(0.0, 0.0, 0.0));
Autodesk.AutoCAD.Geometry.Matrix3d matrix3d3 = Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(new Autodesk.AutoCAD.Geometry.Vector3d(vector3d.X, vector3d.Y, 0.0));
progressMeter_0 = new ProgressMeter();
progressMeter_0.SetLimit(objectId_0.Length);
progressMeter_0.Start("Extruding objects");
int num8 = 0;
int num9 = 0;
for (int l = 0; l < subDMeshHandler.FaceVertexIndex1.Count; l++)
{
try
{
progressMeter_0.MeterProgress();
this.messageFilter_0.CheckMessageFilter((long)l, 1000);
}
catch (System.Exception ex)
{
for (int m = 0; m < list.Count; m++)
{
list[m].Dispose();
}
progressMeter_0.Stop();
throw;
}
try
{
Face face = new Face(new Point3d(subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex1[l]].X, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex1[l]].Y, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex1[l]].Z), new Point3d(subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex2[l]].X, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex2[l]].Y, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex2[l]].Z), new Point3d(subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex3[l]].X, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex3[l]].Y, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex3[l]].Z), false, false, false, false);
double z = face.GetVertexAt(0).Z;
double z2 = face.GetVertexAt(1).Z;
double z3 = face.GetVertexAt(2).Z;
short num10;
if (CMD_FacesToSolid.double_0 < 0.0)
{
if (z <= z2 && z <= z3)
{
num10 = 0;
}
else if (z2 <= z && z2 <= z3)
{
num10 = 1;
}
else
{
num10 = 2;
}
}
else if (z >= z2 && z >= z3)
{
num10 = 0;
}
else if (z2 >= z && z2 >= z3)
{
num10 = 1;
}
else
{
num10 = 2;
}
Point3d vertexAt = face.GetVertexAt(num10);
Point3d point3d = new Point3d(vertexAt.X, vertexAt.Y, vertexAt.Z + CMD_FacesToSolid.double_0);
//point3d..ctor(vertexAt.X, vertexAt.Y, vertexAt.Z + CMD_FacesToSolid.double_0);
Autodesk.AutoCAD.DatabaseServices.Line line = new Autodesk.AutoCAD.DatabaseServices.Line(vertexAt, point3d);
Region region = this.method_2(subDMeshHandler, l);
if (region == null)
{
num8++;
}
else
{
region.TransformBy(matrix3d);
line.TransformBy(matrix3d);
try
{
Solid3d solid3d = new Solid3d();
solid3d.ExtrudeAlongPath(region, line, 0.0);
solid3d.SetPropertiesFrom(face);
list.Add(solid3d);
}
catch (System.Exception ex)
{
num9++;
}
line.Dispose();
region.Dispose();
}
}
catch (System.Exception ex)
{
}
}
editor.WriteMessage("\nNumber of failed projections: " + num8.ToString());
editor.WriteMessage("\nNumber of failed extrusions : " + num8.ToString());
progressMeter_0.Stop();
if (flag && list.Count > 1)
{
progressMeter_0 = new ProgressMeter();
int limit = (int)Math.Ceiling(Math.Log((double)list.Count) / Math.Log(2.0));
progressMeter_0.SetLimit(limit);
progressMeter_0.Start("Building solid");
this.method_1(ref list, ref progressMeter_0);
}
using (Transaction transaction = workingDatabase.TransactionManager.StartTransaction())
{
BlockTable blockTable = (BlockTable)transaction.GetObject(workingDatabase.BlockTableId, (OpenMode)1);
BlockTableRecord blockTableRecord = (BlockTableRecord)transaction.GetObject(blockTable[BlockTableRecord.ModelSpace], (OpenMode)1);
for (int n = 0; n < list.Count; n++)
{
list[n].TransformBy(matrix3d2);
list[n].TransformBy(matrix3d3);
CoordinateTransformator coordinateTransformator = new CoordinateTransformator(coordinateSystem_0, CoordinateSystem.Global());
if (!coordinateTransformator.bool_0)
{
list[n].TransformBy(coordinateTransformator.ToAcadTransformation());
}
blockTableRecord.AppendEntity(list[n]);
transaction.AddNewlyCreatedDBObject(list[n], true);
}
transaction.Commit();
}
progressMeter_0.Stop();
}
public void method_0()
{
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
try
{
//TCPlugin.LicenseManager.CheckValid("FULL");
ObjectId[] objectId_ = CommandLineQuerries.SelectPoints(false);
Class1.string_0 = CommandLineQuerries.SpecifyProjectionDirection(Class1.string_0);
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
string a;
if ((a = Class1.string_0.ToUpper()) != null)
{
if (!(a == "X"))
{
if (!(a == "Y"))
{
if (!(a == "Z"))
{
if (!(a == "U"))
{
if (!(a == "2P"))
{
goto IL_150;
}
vector3d = CommandLineQuerries.Specify2PDirection().BasisVector[2];
vector3d = vector3d.Normalize();
}
else
{
vector3d = Conversions.GetUCS().BasisVector[2].Normalize();
}
}
else
{
vector3d = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
}
}
else
{
vector3d = new ngeometry.VectorGeometry.Vector3d(0.0, 1.0, 0.0);
}
}
else
{
vector3d = new ngeometry.VectorGeometry.Vector3d(1.0, 0.0, 0.0);
}
Point point = new Point(0.0, 0.0, 0.0);
ngeometry.VectorGeometry.Plane plane = new ngeometry.VectorGeometry.Plane(point, vector3d);
CoordinateSystem coordinateSystem_ = new CoordinateSystem(plane);
Class1.smethod_0(objectId_, coordinateSystem_);
return;
}
IL_150:
throw new System.Exception("Invalid option keyword.");
}
catch (System.Exception ex)
{
editor.WriteMessage("\n" + ex.Message);
}
}
public void MinAreaEnclosingRectnagleCommand()
{
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
try
{
//LicenseManager.CheckValid("FULL");
ObjectId[] idArray = CommandLineQuerries.SelectPoints(false);
CMD_MinAreaEnclosingRectangle.string_0 = CommandLineQuerries.SpecifyProjectionDirection(CMD_MinAreaEnclosingRectangle.string_0);
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
string a;
if ((a = CMD_MinAreaEnclosingRectangle.string_0.ToUpper()) != null)
{
if (!(a == "X"))
{
if (!(a == "Y"))
{
if (!(a == "Z"))
{
if (!(a == "U"))
{
if (!(a == "2P"))
{
goto IL_150;
}
vector3d = CommandLineQuerries.Specify2PDirection().BasisVector[2];
vector3d = vector3d.Normalize();
}
else
{
vector3d = Conversions.GetUCS().BasisVector[2].Normalize();
}
}
else
{
vector3d = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
}
}
else
{
vector3d = new ngeometry.VectorGeometry.Vector3d(0.0, 1.0, 0.0);
}
}
else
{
vector3d = new ngeometry.VectorGeometry.Vector3d(1.0, 0.0, 0.0);
}
Point point = new Point(0.0, 0.0, 0.0);
ngeometry.VectorGeometry.Plane plane = new ngeometry.VectorGeometry.Plane(point, vector3d);
CoordinateSystem actualCS = new CoordinateSystem(plane);
CMD_MinAreaEnclosingRectangle.ComputeMinAreaEnclosingRectangle(idArray, actualCS);
return;
}
IL_150:
throw new System.Exception("Invalid option keyword.");
}
catch (System.Exception ex)
{
editor.WriteMessage("\n" + ex.Message);
}
}
public static ngeometry.VectorGeometry.Circle ToCeometricCircle(Autodesk.AutoCAD.DatabaseServices.Circle circle /*ng:类型存疑*/)
{
ngeometry.VectorGeometry.Point center = new ngeometry.VectorGeometry.Point(circle.Center.X, circle.Center.Y, circle.Center.Z);
ngeometry.VectorGeometry.Vector3d normalVector = new ngeometry.VectorGeometry.Vector3d(circle.Normal.X, circle.Normal.Y, circle.Normal.Z);
return(new ngeometry.VectorGeometry.Circle(center, circle.Radius, normalVector));
}
private void method_0(ObjectId[] objectId_0, ref ProgressMeter progressMeter_0, CoordinateSystem coordinateSystem_0)
{
Database workingDatabase = HostApplicationServices.WorkingDatabase;
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
List <Region> list = new List <Region>();
double epsilon = Convert.ToDouble(CMD_Silhouette.string_1);
DBManager.SetEpsilon();
List <Triangle> list2 = Conversions.ToCeometricAcDbTriangleList(objectId_0);
if (!Conversions.IsWCS(coordinateSystem_0))
{
Triangle.TransformCoordinates(list2, CoordinateSystem.Global(), coordinateSystem_0);
}
list2.Sort(new Triangle.CompareMinX());
int num = 0;
double num2 = -1.7976931348623157E+308;
double num3 = -1.7976931348623157E+308;
double num4 = 1.7976931348623157E+308;
double num5 = 1.7976931348623157E+308;
for (int i = list2.Count - 1; i >= 0; i--)
{
if (list2[i].NormalVector.IsOrthogonalTo(new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0)))
{
list2.RemoveAt(i);
num++;
}
else
{
Global.SuspendEpsilon(0.0, 0.0);
list2[i].Vertex1.Z = 0.0;
list2[i].Vertex2.Z = 0.0;
list2[i].Vertex3.Z = 0.0;
Global.ResumeEpsilon();
double minimumX = list2[i].MinimumX;
if (minimumX < num4)
{
num4 = minimumX;
}
double maximumX = list2[i].MaximumX;
if (maximumX > num2)
{
num2 = maximumX;
}
double minimumY = list2[i].MinimumY;
if (minimumY < num5)
{
num5 = minimumY;
}
double maximumY = list2[i].MaximumY;
if (maximumY > num3)
{
num3 = maximumY;
}
}
}
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(0.5 * (num4 + num2), 0.5 * (num5 + num3), 0.0);
double num6 = 0.5 * Math.Max(Math.Abs(num2 - num4), Math.Abs(num3 - num5));
double num7 = Math.Ceiling(100000.0 / num6);
for (int j = 0; j < list2.Count; j++)
{
list2[j] = list2[j].Move(-1.0 * vector3d);
}
SubDMeshHandler subDMeshHandler = new SubDMeshHandler(list2);
subDMeshHandler.BuildDataStructure(false);
int k = 2147483647;
while (k > 0)
{
this.messageFilter_0.CheckMessageFilter();
k = subDMeshHandler.Heal(epsilon);
num += k;
}
editor.WriteMessage("\nDegenerate projections healed: " + num);
Autodesk.AutoCAD.Geometry.Matrix3d matrix3d = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(num7, new Point3d(0.0, 0.0, 0.0));
Autodesk.AutoCAD.Geometry.Matrix3d matrix3d2 = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(1.0 / num7, new Point3d(0.0, 0.0, 0.0));
Autodesk.AutoCAD.Geometry.Matrix3d matrix3d3 = Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(new Autodesk.AutoCAD.Geometry.Vector3d(vector3d.X, vector3d.Y, 0.0));
progressMeter_0 = new ProgressMeter();
progressMeter_0.SetLimit(subDMeshHandler.FaceVertexIndex1.Count);
progressMeter_0.Start("Generating projections");
int num8 = 0;
for (int l = 0; l < subDMeshHandler.FaceVertexIndex1.Count; l++)
{
try
{
progressMeter_0.MeterProgress();
this.messageFilter_0.CheckMessageFilter((long)l, 1000);
}
catch (System.Exception ex)
{
for (int m = 0; m < list.Count; m++)
{
list[m].Dispose();
}
progressMeter_0.Stop();
throw;
}
Region region = this.method_2(subDMeshHandler, l);
if (region == null)
{
num8++;
}
else
{
region.TransformBy(matrix3d);
list.Add(region);
}
}
editor.WriteMessage("\nNumber of failed projections: " + num8.ToString());
progressMeter_0.Stop();
progressMeter_0 = new ProgressMeter();
int limit = (int)Math.Ceiling(Math.Log((double)list.Count) / Math.Log(2.0));
progressMeter_0.SetLimit(limit);
progressMeter_0.Start("Computing silhouette");
if (list.Count > 1)
{
this.method_1(ref list, ref progressMeter_0);
}
list[0].TransformBy(matrix3d2);
list[0].TransformBy(matrix3d3);
CoordinateTransformator coordinateTransformator = new CoordinateTransformator(coordinateSystem_0, CoordinateSystem.Global());
if (!coordinateTransformator.bool_0)
{
list[0].TransformBy(coordinateTransformator.ToAcadTransformation());
}
using (Transaction transaction = workingDatabase.TransactionManager.StartTransaction())
{
BlockTable blockTable = (BlockTable)transaction.GetObject(workingDatabase.BlockTableId, (OpenMode)1);
BlockTableRecord blockTableRecord = (BlockTableRecord)transaction.GetObject(blockTable[BlockTableRecord.ModelSpace], (OpenMode)1);
blockTableRecord.AppendEntity(list[0]);
transaction.AddNewlyCreatedDBObject(list[0], true);
transaction.Commit();
}
progressMeter_0.Stop();
}
public void ProjectLinesCommand()
{
Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
try
{
//LicenseManager.CheckValid("FULL");
ObjectId[] objectId_ = CommandLineQuerries.SelectFaces(false);
ObjectId[] objectId_2 = CommandLineQuerries.SelectLines(false);
LineProjection.string_2 = CommandLineQuerries.SpecifyProjectionDirection(LineProjection.string_2);
//new Vector3d(0.0, 0.0, 1.0);
ngeometry.VectorGeometry.Vector3d directionVector = new ngeometry.VectorGeometry.Vector3d(1.0, 0.0, 0.0);
ngeometry.VectorGeometry.Vector3d directionVector2 = new ngeometry.VectorGeometry.Vector3d(0.0, 1.0, 0.0);
string a;
if ((a = LineProjection.string_2.ToUpper()) != null)
{
if (!(a == "X"))
{
if (!(a == "Y"))
{
if (!(a == "Z"))
{
if (!(a == "U"))
{
if (!(a == "2P"))
{
goto IL_267;
}
CommandLineQuerries.Specify2PDirection().BasisVector[2].Normalize();
}
else
{
Conversions.GetUCS().BasisVector[2].Normalize();
}
}
else
{
directionVector = new ngeometry.VectorGeometry.Vector3d(1.0, 0.0, 0.0);
directionVector2 = new ngeometry.VectorGeometry.Vector3d(0.0, 1.0, 0.0);
//new Vector3d(0.0, 0.0, 1.0);
}
}
else
{
directionVector = new ngeometry.VectorGeometry.Vector3d(1.0, 0.0, 0.0);
directionVector2 = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
//new Vector3d(0.0, 1.0, 0.0);
}
}
else
{
directionVector = new ngeometry.VectorGeometry.Vector3d(0.0, 1.0, 0.0);
directionVector2 = new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0);
//new Vector3d(0.0, 0.0, 1.0);
}
ngeometry.VectorGeometry.Point point = new ngeometry.VectorGeometry.Point(0.0, 0.0, 0.0);
ngeometry.VectorGeometry.Plane plane = new ngeometry.VectorGeometry.Plane(point, directionVector, directionVector2);
CoordinateSystem coordinateSystem_ = new CoordinateSystem(plane);
LineProjection.string_1 = CommandLineQuerries.InsertOnLayer_Current_Face_Line(LineProjection.string_1);
LineProjection.string_0 = CommandLineQuerries.KeywordYesNo("Delete original lines", LineProjection.string_0, false, false);
this.method_0(objectId_2, objectId_, coordinateSystem_, true);
return;
}
IL_267:
throw new System.Exception("Invalid option keyword.");
}
catch (System.Exception ex)
{
editor.WriteMessage("\n" + ex.Message + "\n");
}
}
public static PointSet SubdividePolyline3d(Polyline3d p3d, Transaction trans, double d)
{
PointSet result;
try
{
PointSet pointSet = new PointSet();
if (d <= 0.0)
{
//using (IEnumerator enumerator = p3d.GetEnumerator())
{
IEnumerator enumerator = p3d.GetEnumerator();
while (enumerator.MoveNext())
{
ObjectId objectId = (ObjectId)enumerator.Current;
PolylineVertex3d polylineVertex3d = (PolylineVertex3d)trans.GetObject(objectId, (OpenMode)0);
Point point = new Point(polylineVertex3d.Position.X, polylineVertex3d.Position.Y, polylineVertex3d.Position.Z);
if (pointSet.Count > 1)
{
if (pointSet[pointSet.Count - 1] != point)
{
pointSet.Add(point);
}
}
else
{
pointSet.Add(point);
}
}
goto IL_233;
}
}
List <Point> list = new List <Point>();
foreach (ObjectId objectId2 in p3d)
{
PolylineVertex3d polylineVertex3d2 = (PolylineVertex3d)trans.GetObject(objectId2, (OpenMode)0);
list.Add(new Point(polylineVertex3d2.Position.X, polylineVertex3d2.Position.Y, polylineVertex3d2.Position.Z));
}
if (p3d.Closed)
{
list.Add(list[0]);
}
for (int i = 0; i < list.Count - 1; i++)
{
Point point2 = list[i];
Point point3 = list[i + 1];
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(point3 - point2);
double num = point2.DistanceTo(point3);
double num2 = (double)((int)Math.Max(Math.Ceiling(num / d), 1.0));
double norm = num / num2;
vector3d.Norm = norm;
int num3 = 0;
while ((double)num3 < num2)
{
pointSet.Add(point2 + (double)num3 * vector3d.ToPoint());
num3++;
}
}
if (!p3d.Closed)
{
pointSet.Add(list[list.Count - 1]);
}
IL_233:
result = pointSet;
}
catch (System.Exception ex)
{
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.WriteMessage("Can not subdivide polyline3d (handle: " + p3d.Handle.ToString() + ")\n");
result = null;
}
return(result);
}
public static PointSet SubdivideLWPolyline(Polyline lwp, double d)
{
PointSet result;
try
{
PointSet pointSet = new PointSet();
int numberOfVertices = lwp.NumberOfVertices;
if (d <= 0.0)
{
for (int i = 0; i < numberOfVertices; i++)
{
Point3d point3dAt = lwp.GetPoint3dAt(i);
Point point = new Point(point3dAt.X, point3dAt.Y, point3dAt.Z);
if (pointSet.Count > 1)
{
if (pointSet[pointSet.Count - 1] != point)
{
pointSet.Add(point);
}
}
else
{
pointSet.Add(point);
}
}
}
else
{
List <Point> list = new List <Point>();
for (int j = 0; j < numberOfVertices; j++)
{
Point3d point3dAt2 = lwp.GetPoint3dAt(j);
list.Add(new Point(point3dAt2.X, point3dAt2.Y, point3dAt2.Z));
}
if (lwp.Closed)
{
list.Add(list[0]);
}
for (int k = 0; k < list.Count - 1; k++)
{
Point point2 = list[k];
Point point3 = list[k + 1];
ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(point3 - point2);
double num = point2.DistanceTo(point3);
int num2 = (int)Math.Max(Math.Ceiling(num / d), 1.0);
double norm = num / (double)num2;
vector3d.Norm = norm;
for (int l = 0; l < num2; l++)
{
pointSet.Add(point2 + (double)l * vector3d.ToPoint());
}
}
if (!lwp.Closed)
{
pointSet.Add(list[list.Count - 1]);
}
}
result = pointSet;
}
catch (System.Exception ex)
{
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.WriteMessage("Can not subdivide polyline (handle: " + lwp.Handle.ToString() + ")\n");
result = null;
}
return(result);
}