public override Capture BeginCapture(InputState input, CaptureSide eSide)
{
return(Capture.Begin(this));
}
void HandleInput_MouseOrGamepad()
{
// update mouse/gamepad cursor
MouseController.Update();
// have to do this after cursor update in case hotkey uses mouse position
HandleKeyboardInput();
// create our super-input object (wraps all supported input types)
InputState input = new InputState();
input.Initialize_MouseGamepad(this);
lastInputState = input;
CameraInteractionState eCamState = (MouseCameraController != null)
? MouseCameraController.CheckCameraControls(input) : CameraInteractionState.Ignore;
if (eCamState == CameraInteractionState.BeginCameraAction)
{
TerminateHovers(input);
bInCameraControl = true;
ActiveCamera.SetTargetVisible(true);
}
else if (eCamState == CameraInteractionState.EndCameraAction)
{
bInCameraControl = false;
ActiveCamera.SetTargetVisible(false);
}
else if (bInCameraControl)
{
ActiveCamera.SetTargetVisible(true);
MouseCameraController.DoCameraControl(Scene, ActiveCamera, input);
}
else
{
// run override behaviors
overrideBehaviors.SendOverrideInputs(input);
input.MouseGamepadCaptureActive = (captureMouse != null);
if (InCaptureMouse)
{
Capture cap = captureMouse.element.UpdateCapture(input, captureMouse.data);
if (cap.state == CaptureState.Continue)
{
// (carry on)
}
else if (cap.state == CaptureState.End)
{
captureMouse = null;
}
}
else
{
// this is very simplistic...needs to be rewritten like space controllers
List <CaptureRequest> vRequests = new List <CaptureRequest>();
inputBehaviors.CollectWantsCapture(input, vRequests);
if (vRequests.Count > 0)
{
// end outstanding hovers
TerminateHovers(input);
// select one of the capture requests. technically we could end
// up with none successfully Begin'ing, but behaviors should be
// doing those checks in WantCapture, not BeginCapture !!
vRequests.OrderBy(x => x.element.Priority);
Capture capReq = null;
for (int i = 0; i < vRequests.Count && capReq == null; ++i)
{
if (vRequests[i].side != CaptureSide.Any)
{
continue; // not possible in mouse paths...
}
// before we actually begin capture we will complete any text editing
// [RMS] perhaps this should be configurable for behavior? Some behaviors
// do not require this (eg view controls...)
completeTextEntryOnFocusChange();
Capture c = vRequests[i].element.BeginCapture(input, vRequests[i].side);
if (c.state == CaptureState.Begin)
{
capReq = c;
}
}
captureMouse = capReq;
}
}
// if we don't have a capture, do hover
if (captureMouse == null)
{
inputBehaviors.UpdateHover(input);
}
}
}
void HandleInput_SpaceControllers()
{
// update cursors
SpatialController.Update();
MouseController.HideCursor();
// have to do this after cursor update in case hotkey uses mouse position
HandleKeyboardInput();
// create our super-input object (wraps all supported input types)
InputState input = new InputState();
input.Initialize_SpatialController(this);
lastInputState = input;
// run override behaviors
overrideBehaviors.SendOverrideInputs(input);
input.LeftCaptureActive = (captureLeft != null);
input.RightCaptureActive = (captureRight != null);
// update left-capture
if (captureLeft != null)
{
Capture cap = captureLeft.element.UpdateCapture(input, captureLeft.data);
if (cap.state == CaptureState.Continue)
{
// (carry on)
}
else if (cap.state == CaptureState.End)
{
DebugUtil.Log(10, "[SceneController] released left capture " + captureLeft.element.CaptureIdentifier);
if (captureRight == captureLeft)
{
captureRight = null; // if we are doing a dual-capture, we only want to end once!!
}
captureLeft = null;
}
}
// update right-capture
// if we are doing a both-capture, we only want to send update once
if (captureRight != null && captureRight != captureLeft)
{
Capture cap = captureRight.element.UpdateCapture(input, captureRight.data);
if (cap.state == CaptureState.Continue)
{
// (carry on)
}
else if (cap.state == CaptureState.End)
{
DebugUtil.Log(10, "[SceneController] released right capture " + captureRight.element.CaptureIdentifier);
captureRight = null;
}
}
// if we have a free device, check for capture.
bool bCanCapture = (bInCameraControl == false);
if (bCanCapture && (captureLeft == null || captureRight == null))
{
// collect up capture requests
List <CaptureRequest> vRequests = new List <CaptureRequest>();
inputBehaviors.CollectWantsCapture(input, vRequests);
if (vRequests.Count > 0)
{
// end outstanding hovers
TerminateHovers(input);
// select one of the capture requests. technically we could end
// up with none successfully Begin'ing, but behaviors should be
// doing those checks in WantCapture, not BeginCapture !!
vRequests.OrderBy(x => x.element.Priority);
Capture capReq = null;
for (int i = 0; i < vRequests.Count && capReq == null; ++i)
{
// filter out invalid requests
CaptureSide eUseSide = vRequests[i].side;
if (eUseSide == CaptureSide.Any) // replace Any with Both. Does that make sense??
{
eUseSide = CaptureSide.Both;
}
if ((eUseSide == CaptureSide.Left || eUseSide == CaptureSide.Both) &&
captureLeft != null)
{
continue;
}
if ((eUseSide == CaptureSide.Right || eUseSide == CaptureSide.Both) &&
captureRight != null)
{
continue;
}
Capture c = vRequests[i].element.BeginCapture(input, eUseSide);
if (c.state == CaptureState.Begin)
{
capReq = c;
}
}
if (capReq != null)
{
// technically we only should terminate hover on capture controller,
// but that seems really hard. This will clear hovers but they will
// come back next frame. Perhaps revisit if this is causing flicker...
TerminateHovers(input);
// [RMS] most of this checking is redundant now, but leaving because of debug logging
if (capReq.data.which == CaptureSide.Left)
{
if (captureLeft != null)
{
DebugUtil.Warning("[SceneController.HandleInput_SpaceControllers] received Capture request for Left side from {0}, but already capturing! Ignoring.", capReq.element.CaptureIdentifier);
}
else
{
captureLeft = capReq;
DebugUtil.Log(10, "[SceneController] began left-capture" + captureLeft.element.CaptureIdentifier);
}
}
else if (capReq.data.which == CaptureSide.Right)
{
if (captureRight != null)
{
DebugUtil.Warning("[SceneController.HandleInput_SpaceControllers] received Capture request for Right side from {0}, but already capturing! Ignoring.", capReq.element.CaptureIdentifier);
}
else
{
captureRight = capReq;
DebugUtil.Log(10, "[SceneController] began right-capture" + captureRight.element.CaptureIdentifier);
}
}
else if (capReq.data.which == CaptureSide.Both || capReq.data.which == CaptureSide.Any)
{
if (captureLeft != null || captureRight != null)
{
DebugUtil.Warning("[SceneController.HandleInput_SpaceControllers] received Capture request for both sides from {0}, but already capturing! Ignoring.", capReq.element.CaptureIdentifier);
}
else
{
captureLeft = captureRight = capReq;
DebugUtil.Log(10, "[SceneController] began both-capture " + captureLeft.element.CaptureIdentifier);
}
}
}
}
}
// update hover if we have a free device
if (captureLeft == null || captureRight == null)
{
inputBehaviors.UpdateHover(input);
}
}
void HandleInput_Touch()
{
// update mouse/gamepad cursor
MouseController.Update();
// create our super-input object (wraps all supported input types)
InputState input = new InputState();
input.Initialize_TouchInput(this);
lastInputState = input;
// run override behaviors
overrideBehaviors.SendOverrideInputs(input);
input.TouchCaptureActive = (captureTouch != null);
// update left-capture
if (captureTouch != null)
{
Capture cap = captureTouch.element.UpdateCapture(input, captureTouch.data);
if (cap.state == CaptureState.Continue)
{
// (carry on)
}
else if (cap.state == CaptureState.End)
{
DebugUtil.Log(10, "[SceneController] released touch capture " + captureTouch.element.CaptureIdentifier);
captureTouch = null;
}
}
// if we have a free device, check for capture.
bool bCanCapture = (bInCameraControl == false);
if (bCanCapture && captureTouch == null)
{
// collect up capture requests
List <CaptureRequest> vRequests = new List <CaptureRequest>();
inputBehaviors.CollectWantsCapture(input, vRequests);
if (vRequests.Count > 0)
{
// select one of the capture requests. technically we could end
// up with none successfully Begin'ing, but behaviors should be
// doing those checks in WantCapture, not BeginCapture !!
vRequests.OrderBy(x => x.element.Priority);
Capture capReq = null;
for (int i = 0; i < vRequests.Count && capReq == null; ++i)
{
// filter out invalid requests
// (??)
// before we actually begin capture we will complete any text editing
// [RMS] perhaps this should be configurable for behavior? Some behaviors
// do not require this (eg view controls...)
completeTextEntryOnFocusChange();
Capture c = vRequests[i].element.BeginCapture(input, CaptureSide.Any);
if (c.state == CaptureState.Begin)
{
capReq = c;
}
}
if (capReq != null)
{
captureTouch = capReq;
}
}
}
}
// Use this for initialization
public void Start(SceneOptions options)
{
this.options = options;
DebugUtil.LogLevel = options.LogLevel;
// initialize VR platform if VR is active
if (gs.VRPlatform.VREnabled)
{
if (options.Use2DCockpit)
{
throw new Exception("FContext.Start: cannot use 2D Orthographic Cockpit with VR!");
}
if (options.SpatialCameraRig != null)
{
gs.VRPlatform.Initialize(options.SpatialCameraRig);
}
}
InputExtension.Get.Start();
nextFrameActions = new ActionSet();
// intialize camera stuff
camTracker = new CameraTracking();
camTracker.Initialize(this);
GetScene();
if (options.SceneInitializer != null)
{
options.SceneInitializer.Initialize(GetScene());
}
if (options.DefaultGizmoBuilder != null)
{
transformManager = new TransformManager(options.DefaultGizmoBuilder);
}
else
{
transformManager = new TransformManager(new AxisTransformGizmoBuilder());
}
if (options.EnableTransforms)
{
transformManager.Initialize(this);
}
toolManager = new ToolManager();
toolManager.Initialize(this);
toolManager.OnToolActivationChanged += OnToolActivationChanged;
MouseController.Start();
SpatialController.Start();
// [RMS] hardcode starting cam target point to origin
ActiveCamera.SetTarget(Vector3f.Zero);
if (options.MouseCameraControls != null)
{
MouseCameraController = options.MouseCameraControls;
}
// apply initial transformation to scene
ActiveCamera.Manipulator().SceneTranslate(Scene, SceneGraphConfig.InitialSceneTranslate);
// create behavior sets
inputBehaviors = new InputBehaviorSet();
overrideBehaviors = new InputBehaviorSet();
// cockpit needs to go last because UI setup may depend on above
cockpitStack = new Stack <Cockpit>();
if (options.EnableCockpit)
{
PushCockpit(options.CockpitInitializer);
}
captureMouse = null;
captureTouch = null;
captureLeft = captureRight = null;
bInCameraControl = false;
// [RMS] this locks cursor to game unless user presses escape or exits
if (FPlatform.IsUsingVR() || options.UseSystemMouseCursor == false)
{
Cursor.lockState = CursorLockMode.Locked;
}
// set hacky hackenstein global
ActiveContext_HACK = this;
startup_checks();
}