private FormatInformation(int formatInfo)
{
// Bits 3,4
errorCorrectionLevel = ErrorCorrectionLevel.forBits((formatInfo >> 3) & 0x03);
// Bottom 3 bits
dataMask = (byte)(formatInfo & 0x07);
}
private static ZXing.QrCode.Internal.Version ChooseVersion(int RequiredBits, out ErrorCorrectionLevel ECLevel)
{
var ecls = new ErrorCorrectionLevel[] { ErrorCorrectionLevel.H, ErrorCorrectionLevel.Q, ErrorCorrectionLevel.M, ErrorCorrectionLevel.L };
int totalInputBytes = (RequiredBits + 7) / 8;
// In the following comments, we use numbers of Version 7-H.
for (int versionNum = 1; versionNum <= 40; versionNum++)
{
var version = ZXing.QrCode.Internal.Version.getVersionForNumber(versionNum);
// numBytes = 196
int numBytes = version.TotalCodewords;
// getNumECBytes = 130
if (numBytes >= totalInputBytes)
{
for (int ecl = 0; ecl < ecls.Length; ecl++)
{
var ecBlocks = version.getECBlocksForLevel(ecls[ecl]);
int numEcBytes = ecBlocks.TotalECCodewords;
// getNumDataBytes = 196 - 130 = 66
int numDataBytes = numBytes - numEcBytes;
if (numDataBytes >= totalInputBytes)
{
ECLevel = ecls[ecl];
return version;
}
}
}
}
throw new ArgumentException("Data too big", nameof(RequiredBits));
}
private static Version chooseVersion(int numInputBits, ErrorCorrectionLevel ecLevel)
{
for (int versionNum = 1; versionNum <= 40; versionNum++)
{
var version = Version.getVersionForNumber(versionNum);
if (willFit(numInputBits, version, ecLevel))
{
return(version);
}
}
throw new WriterException("Data too big");
}
/// <summary>
/// Build 2D matrix of QR Code from "dataBits" with "ecLevel", "version" and "getMaskPattern". On
/// success, store the result in "matrix" and return true.
/// </summary>
/// <param name="dataBits">The data bits.</param>
/// <param name="ecLevel">The ec level.</param>
/// <param name="version">The version.</param>
/// <param name="maskPattern">The mask pattern.</param>
/// <param name="matrix">The matrix.</param>
public static void buildMatrix(BitArray dataBits, ErrorCorrectionLevel ecLevel, Version version, int maskPattern,
ByteMatrix matrix)
{
clearMatrix(matrix);
embedBasicPatterns(version, matrix);
// Type information appear with any version.
embedTypeInfo(ecLevel, maskPattern, matrix);
// Version info appear if version >= 7.
maybeEmbedVersionInfo(version, matrix);
// Data should be embedded at end.
embedDataBits(dataBits, maskPattern, matrix);
}
private DecoderResult decode(BitMatrixParser parser, IDictionary <DecodeHintType, object> hints)
{
Version version = parser.readVersion();
if (version == null)
{
return(null);
}
var formatinfo = parser.readFormatInformation();
if (formatinfo == null)
{
return(null);
}
ErrorCorrectionLevel ecLevel = formatinfo.ErrorCorrectionLevel;
// Read codewords
byte[] codewords = parser.readCodewords();
if (codewords == null)
{
return(null);
}
// Separate into data blocks
DataBlock[] dataBlocks = DataBlock.getDataBlocks(codewords, version, ecLevel);
// Count total number of data bytes
int totalBytes = 0;
foreach (var dataBlock in dataBlocks)
{
totalBytes += dataBlock.NumDataCodewords;
}
byte[] resultBytes = new byte[totalBytes];
int resultOffset = 0;
// Error-correct and copy data blocks together into a stream of bytes
foreach (var dataBlock in dataBlocks)
{
byte[] codewordBytes = dataBlock.Codewords;
int numDataCodewords = dataBlock.NumDataCodewords;
if (!correctErrors(codewordBytes, numDataCodewords))
{
return(null);
}
for (int i = 0; i < numDataCodewords; i++)
{
resultBytes[resultOffset++] = codewordBytes[i];
}
}
// Decode the contents of that stream of bytes
return(DecodedBitStreamParser.decode(resultBytes, version, ecLevel, hints));
}
/// <summary>
/// Decides the smallest version of QR code that will contain all of the provided data.
/// </summary>
/// <exception cref="WriterException">if the data cannot fit in any version</exception>
private static Version recommendVersion(ErrorCorrectionLevel ecLevel, Mode mode, BitArray headerBits, BitArray dataBits)
{
// Hard part: need to know version to know how many bits length takes. But need to know how many
// bits it takes to know version. First we take a guess at version by assuming version will be
// the minimum, 1:
var provisionalBitsNeeded = calculateBitsNeeded(mode, headerBits, dataBits, Version.getVersionForNumber(1));
var provisionalVersion = chooseVersion(provisionalBitsNeeded, ecLevel);
// Use that guess to calculate the right version. I am still not sure this works in 100% of cases.
var bitsNeeded = calculateBitsNeeded(mode, headerBits, dataBits, provisionalVersion);
return(chooseVersion(bitsNeeded, ecLevel));
}
/// <summary></summary>
/// <returns>true if the number of input bits will fit in a code with the specified version and error correction level.</returns>
private static bool willFit(int numInputBits, Version version, ErrorCorrectionLevel ecLevel)
{
// In the following comments, we use numbers of Version 7-H.
// numBytes = 196
var numBytes = version.TotalCodewords;
// getNumECBytes = 130
var ecBlocks = version.getECBlocksForLevel(ecLevel);
var numEcBytes = ecBlocks.TotalECCodewords;
// getNumDataBytes = 196 - 130 = 66
var numDataBytes = numBytes - numEcBytes;
var totalInputBytes = (numInputBits + 7) / 8;
return(numDataBytes >= totalInputBytes);
}
public static ByteMatrix CreateRawQR(byte[] rawData, ErrorCorrectionLevel errorCorrectionLevel)
{
int versionNumber = GetSmallestVersion(rawData.Length, errorCorrectionLevel);
ZXing.QrCode.Internal.Version version = ZXing.QrCode.Internal.Version.getVersionForNumber(versionNumber);
BitArray dataBits = new BitArray();
foreach (byte b in rawData)
dataBits.appendBits(b, 8);
ZXing.QrCode.Internal.Version.ECBlocks ecBlocks = version.getECBlocksForLevel(errorCorrectionLevel);
int bytesLength = version.TotalCodewords - ecBlocks.TotalECCodewords;
terminateBits(bytesLength, dataBits);
BitArray resultBits = interleaveWithECBytes(dataBits, version.TotalCodewords, bytesLength, ecBlocks.NumBlocks);
ByteMatrix matrix = new ByteMatrix(version.DimensionForVersion, version.DimensionForVersion);
int maskPattern = chooseMaskPattern(resultBits, errorCorrectionLevel, version, matrix);
MatrixUtil.buildMatrix(resultBits, errorCorrectionLevel, version, maskPattern, matrix);
return matrix;
}
private static Version chooseVersion(int numInputBits, ErrorCorrectionLevel ecLevel)
{
// In the following comments, we use numbers of Version 7-H.
for (int versionNum = 1; versionNum <= 40; versionNum++)
{
Version version = Version.getVersionForNumber(versionNum);
// numBytes = 196
int numBytes = version.TotalCodewords;
// getNumECBytes = 130
Version.ECBlocks ecBlocks = version.getECBlocksForLevel(ecLevel);
int numEcBytes = ecBlocks.TotalECCodewords;
// getNumDataBytes = 196 - 130 = 66
int numDataBytes = numBytes - numEcBytes;
int totalInputBytes = (numInputBits + 7) / 8;
if (numDataBytes >= totalInputBytes)
{
return(version);
}
}
throw new WriterException("Data too big");
}
private static int chooseMaskPattern(BitArray bits,
ErrorCorrectionLevel ecLevel,
Version version,
ByteMatrix matrix)
{
int minPenalty = Int32.MaxValue; // Lower penalty is better.
int bestMaskPattern = -1;
// We try all mask patterns to choose the best one.
for (int maskPattern = 0; maskPattern < QRCode.NUM_MASK_PATTERNS; maskPattern++)
{
MatrixUtil.buildMatrix(bits, ecLevel, version, maskPattern, matrix);
int penalty = calculateMaskPenalty(matrix);
if (penalty < minPenalty)
{
minPenalty = penalty;
bestMaskPattern = maskPattern;
}
}
return(bestMaskPattern);
}
private static int chooseMaskPattern(BitArray bits,
ErrorCorrectionLevel ecLevel,
Version version,
ByteMatrix matrix)
{
int minPenalty = Int32.MaxValue; // Lower penalty is better.
int bestMaskPattern = -1;
// We try all mask patterns to choose the best one.
for (int maskPattern = 0; maskPattern < QRCode.NUM_MASK_PATTERNS; maskPattern++)
{
MatrixUtil.buildMatrix(bits, ecLevel, version, maskPattern, matrix);
int penalty = calculateMaskPenalty(matrix);
if (penalty < minPenalty)
{
minPenalty = penalty;
bestMaskPattern = maskPattern;
}
}
return bestMaskPattern;
}
/// <summary>
/// Make bit vector of type information. On success, store the result in "bits" and return true.
/// Encode error correction level and mask pattern. See 8.9 of
/// JISX0510:2004 (p.45) for details.
/// </summary>
/// <param name="ecLevel">The ec level.</param>
/// <param name="maskPattern">The mask pattern.</param>
/// <param name="bits">The bits.</param>
public static void makeTypeInfoBits(ErrorCorrectionLevel ecLevel, int maskPattern, BitArray bits)
{
if (!QRCode.isValidMaskPattern(maskPattern))
{
throw new WriterException("Invalid mask pattern");
}
int typeInfo = (ecLevel.Bits << 3) | maskPattern;
bits.appendBits(typeInfo, 5);
int bchCode = calculateBCHCode(typeInfo, TYPE_INFO_POLY);
bits.appendBits(bchCode, 10);
BitArray maskBits = new BitArray();
maskBits.appendBits(TYPE_INFO_MASK_PATTERN, 15);
bits.xor(maskBits);
if (bits.Size != 15)
{
// Just in case.
throw new WriterException("should not happen but we got: " + bits.Size);
}
}
/// <summary>
/// Gets the EC blocks for level.
/// </summary>
/// <param name="ecLevel">The ec level.</param>
/// <returns></returns>
public ECBlocks getECBlocksForLevel(ErrorCorrectionLevel ecLevel)
{
return ecBlocks[ecLevel.ordinal()];
}
/// <summary>
/// Build 2D matrix of QR Code from "dataBits" with "ecLevel", "version" and "getMaskPattern". On
/// success, store the result in "matrix" and return true.
/// </summary>
/// <param name="dataBits">The data bits.</param>
/// <param name="ecLevel">The ec level.</param>
/// <param name="version">The version.</param>
/// <param name="maskPattern">The mask pattern.</param>
/// <param name="matrix">The matrix.</param>
public static void buildMatrix(BitArray dataBits, ErrorCorrectionLevel ecLevel, Version version, int maskPattern, ByteMatrix matrix)
{
clearMatrix(matrix);
embedBasicPatterns(version, matrix);
// Type information appear with any version.
embedTypeInfo(ecLevel, maskPattern, matrix);
// Version info appear if version >= 7.
maybeEmbedVersionInfo(version, matrix);
// Data should be embedded at end.
embedDataBits(dataBits, maskPattern, matrix);
}
/// <summary>
/// Embed type information. On success, modify the matrix.
/// </summary>
/// <param name="ecLevel">The ec level.</param>
/// <param name="maskPattern">The mask pattern.</param>
/// <param name="matrix">The matrix.</param>
public static void embedTypeInfo(ErrorCorrectionLevel ecLevel, int maskPattern, ByteMatrix matrix)
{
BitArray typeInfoBits = new BitArray();
makeTypeInfoBits(ecLevel, maskPattern, typeInfoBits);
for (int i = 0; i < typeInfoBits.Size; ++i)
{
// Place bits in LSB to MSB order. LSB (least significant bit) is the last value in
// "typeInfoBits".
int bit = typeInfoBits[typeInfoBits.Size - 1 - i] ? 1 : 0;
// Type info bits at the left top corner. See 8.9 of JISX0510:2004 (p.46).
int x1 = TYPE_INFO_COORDINATES[i][0];
int y1 = TYPE_INFO_COORDINATES[i][1];
matrix[x1, y1] = bit;
if (i < 8)
{
// Right top corner.
int x2 = matrix.Width - i - 1;
int y2 = 8;
matrix[x2, y2] = bit;
}
else
{
// Left bottom corner.
int x2 = 8;
int y2 = matrix.Height - 7 + (i - 8);
matrix[x2, y2] = bit;
}
}
}
private void loadSettings()
{
bool update = false;
///
/// QR Detect indicator mask color
///
try
{
maskColor = ColorTranslator.FromHtml( appSection.Settings["MaskColor"].Value );
}
catch
{
appSection.Settings.Add( "MaskColor", ColorTranslator.ToHtml( maskColor ) );
update = true;
}
colorDlg.Color = maskColor;
picMaskColor.BackColor = maskColor;
///
/// Overlay Logo Icon
///
try
{
overlayLogo = Convert.ToBoolean( appSection.Settings["OverlayLogo"].Value );
}
catch
{
appSection.Settings.Add( "OverlayLogo", overlayLogo.ToString() );
update = true;
}
chkOverLogo.Checked = overlayLogo;
try
{
overlayBGColor = ColorTranslator.FromHtml( appSection.Settings["OverlayBGColor"].Value );
}
catch
{
appSection.Settings.Add( "OverlayBGColor", ColorTranslator.ToHtml( overlayBGColor ) );
update = true;
}
try
{
overlayLogoImage = appSection.Settings["OverlayLogoImage"].Value;
}
catch
{
appSection.Settings.Add( "OverlayLogoImage", overlayLogoImage );
update = true;
}
///
/// QR Encode Error Level
///
string errorString = "M";
try
{
errorString = appSection.Settings["ErrorCorrectionLevel"].Value;
}
catch
{
appSection.Settings.Add( "ErrorCorrectionLevel", errorString );
update = true;
}
if ( string.Equals( errorString, I18N._( "L" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.L;
}
else if ( string.Equals( errorString, I18N._( "M" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.M;
}
else if ( string.Equals( errorString, I18N._( "Q" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.Q;
}
else if ( string.Equals( errorString, I18N._( "H" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.H;
}
else
{
errorLevel = ErrorCorrectionLevel.M;
}
cbErrorLevel.SelectedIndex = cbErrorLevel.Items.IndexOf( I18N._( errorString ) );
///
/// QR Decode Options
///
try
{
chkDecodeFormat1D.Checked = Convert.ToBoolean( appSection.Settings["DecodeFormat1D"].Value );
}
catch
{
appSection.Settings.Add( "DecodeFormat1D", chkDecodeFormat1D.Checked.ToString() );
update = true;
}
try
{
chkDecodeFormatDM.Checked = Convert.ToBoolean( appSection.Settings["DecodeFormatDM"].Value );
}
catch
{
appSection.Settings.Add( "DecodeFormatDM", chkDecodeFormatDM.Checked.ToString() );
update = true;
}
try
{
chkDecodeFormatQR.Checked = Convert.ToBoolean( appSection.Settings["DecodeFormatQR"].Value );
}
catch
{
appSection.Settings.Add( "DecodeFormatQR", chkDecodeFormatQR.Checked.ToString() );
update = true;
}
if(update) config.Save();
}
internal static DecoderResult decode(byte[] bytes,
Version version,
ErrorCorrectionLevel ecLevel,
IDictionary<DecodeHintType, object> hints)
{
var bits = new BitSource(bytes);
var result = new StringBuilder(50);
var byteSegments = new List<byte[]>(1);
var symbolSequence = -1;
var parityData = -1;
try
{
// CharacterSetECI currentCharacterSetECI = null;
bool fc1InEffect = false;
Mode mode;
do
{
// While still another segment to read...
if (bits.available() < 4)
{
// OK, assume we're done. Really, a TERMINATOR mode should have been recorded here
mode = Mode.TERMINATOR;
}
else
{
try
{
mode = Mode.forBits(bits.readBits(4)); // mode is encoded by 4 bits
}
catch (ArgumentException)
{
return null;
}
}
if (mode != Mode.TERMINATOR)
{
if (mode == Mode.FNC1_FIRST_POSITION || mode == Mode.FNC1_SECOND_POSITION)
{
// We do little with FNC1 except alter the parsed result a bit according to the spec
fc1InEffect = true;
}
else if (mode == Mode.STRUCTURED_APPEND)
{
if (bits.available() < 16)
{
return null;
}
// not really supported; but sequence number and parity is added later to the result metadata
// Read next 8 bits (symbol sequence #) and 8 bits (parity data), then continue
symbolSequence = bits.readBits(8);
parityData = bits.readBits(8);
}
else if (mode == Mode.ECI)
{
/*
// Count doesn't apply to ECI
int value = parseECIValue(bits);
currentCharacterSetECI = CharacterSetECI.getCharacterSetECIByValue(value);
if (currentCharacterSetECI == null)
{
return null;
}
* */
}
else
{
// First handle Hanzi mode which does not start with character count
if (mode == Mode.HANZI)
{
//chinese mode contains a sub set indicator right after mode indicator
int subset = bits.readBits(4);
int countHanzi = bits.readBits(mode.getCharacterCountBits(version));
if (subset == GB2312_SUBSET)
{
if (!decodeHanziSegment(bits, result, countHanzi))
return null;
}
}
else
{
// "Normal" QR code modes:
// How many characters will follow, encoded in this mode?
int count = bits.readBits(mode.getCharacterCountBits(version));
if (mode == Mode.NUMERIC)
{
if (!decodeNumericSegment(bits, result, count))
return null;
}
else if (mode == Mode.ALPHANUMERIC)
{
if (!decodeAlphanumericSegment(bits, result, count, fc1InEffect))
return null;
}
else if (mode == Mode.BYTE)
{
if (!decodeByteSegment(bits, result, count, byteSegments, hints))
return null;
}
else if (mode == Mode.KANJI)
{
if (!decodeKanjiSegment(bits, result, count))
return null;
}
else
{
return null;
}
}
}
}
} while (mode != Mode.TERMINATOR);
}
catch (ArgumentException)
{
// from readBits() calls
return null;
}
#if WindowsCE
var resultString = result.ToString().Replace("\n", "\r\n");
#else
var resultString = result.ToString().Replace("\r\n", "\n").Replace("\n", Environment.NewLine);
#endif
return new DecoderResult(bytes,
resultString,
byteSegments.Count == 0 ? null : byteSegments,
ecLevel == null ? null : ecLevel.ToString(),
symbolSequence, parityData);
}
/// <summary>
/// Encode "bytes" with the error correction level "ecLevel". The encoding mode will be chosen
/// internally by chooseMode(). On success, store the result in "qrCode".
/// We recommend you to use QRCode.EC_LEVEL_L (the lowest level) for
/// "getECLevel" since our primary use is to show QR code on desktop screens. We don't need very
/// strong error correction for this purpose.
/// Note that there is no way to encode bytes in MODE_KANJI. We might want to add EncodeWithMode()
/// with which clients can specify the encoding mode. For now, we don't need the functionality.
/// </summary>
/// <param name="content">The content.</param>
/// <param name="ecLevel">The ec level.</param>
public static QRCode encode(String content, ErrorCorrectionLevel ecLevel)
{
return(encode(content, ecLevel, null));
}
internal static DecoderResult decode(byte[] bytes,
Version version,
ErrorCorrectionLevel ecLevel,
IDictionary <DecodeHintType, object> hints)
{
var bits = new BitSource(bytes);
var result = new StringBuilder(50);
var byteSegments = new List <byte[]> (1);
var symbolSequence = -1;
var parityData = -1;
try {
CharacterSetECI currentCharacterSetECI = null;
bool fc1InEffect = false;
Mode mode;
do
{
// While still another segment to read...
if (bits.available() < 4)
{
// OK, assume we're done. Really, a TERMINATOR mode should have been recorded here
mode = Mode.TERMINATOR;
}
else
{
try {
mode = Mode.forBits(bits.readBits(4)); // mode is encoded by 4 bits
} catch (ArgumentException) {
return(null);
}
}
if (mode != Mode.TERMINATOR)
{
if (mode == Mode.FNC1_FIRST_POSITION || mode == Mode.FNC1_SECOND_POSITION)
{
// We do little with FNC1 except alter the parsed result a bit according to the spec
fc1InEffect = true;
}
else if (mode == Mode.STRUCTURED_APPEND)
{
if (bits.available() < 16)
{
return(null);
}
// not really supported; but sequence number and parity is added later to the result metadata
// Read next 8 bits (symbol sequence #) and 8 bits (parity data), then continue
symbolSequence = bits.readBits(8);
parityData = bits.readBits(8);
}
else if (mode == Mode.ECI)
{
// Count doesn't apply to ECI
int value = parseECIValue(bits);
currentCharacterSetECI = CharacterSetECI.getCharacterSetECIByValue(value);
if (currentCharacterSetECI == null)
{
return(null);
}
}
else
{
// First handle Hanzi mode which does not start with character count
if (mode == Mode.HANZI)
{
//chinese mode contains a sub set indicator right after mode indicator
int subset = bits.readBits(4);
int countHanzi = bits.readBits(mode.getCharacterCountBits(version));
if (subset == GB2312_SUBSET)
{
if (!decodeHanziSegment(bits, result, countHanzi))
{
return(null);
}
}
}
else
{
// "Normal" QR code modes:
// How many characters will follow, encoded in this mode?
int count = bits.readBits(mode.getCharacterCountBits(version));
if (mode == Mode.NUMERIC)
{
if (!decodeNumericSegment(bits, result, count))
{
return(null);
}
}
else if (mode == Mode.ALPHANUMERIC)
{
if (!decodeAlphanumericSegment(bits, result, count, fc1InEffect))
{
return(null);
}
}
else if (mode == Mode.BYTE)
{
if (!decodeByteSegment(bits, result, count, currentCharacterSetECI, byteSegments, hints))
{
return(null);
}
}
else if (mode == Mode.KANJI)
{
if (!decodeKanjiSegment(bits, result, count))
{
return(null);
}
}
else
{
return(null);
}
}
}
}
} while (mode != Mode.TERMINATOR);
} catch (ArgumentException) {
// from readBits() calls
return(null);
}
#if WindowsCE
var resultString = result.ToString().Replace("\n", "\r\n");
#else
var resultString = result.ToString().Replace("\r\n", "\n").Replace("\n", Environment.NewLine);
#endif
return(new DecoderResult(bytes,
resultString,
byteSegments.Count == 0 ? null : byteSegments,
ecLevel == null ? null : ecLevel.ToString(),
symbolSequence, parityData));
}
/// <summary>
/// Encodes the specified content.
/// </summary>
/// <param name="content">The content.</param>
/// <param name="ecLevel">The ec level.</param>
/// <param name="hints">The hints.</param>
/// <returns></returns>
public static QRCode encode(String content,
ErrorCorrectionLevel ecLevel,
IDictionary <EncodeHintType, object> hints)
{
// Determine what character encoding has been specified by the caller, if any
bool hasEncodingHint = hints != null && hints.ContainsKey(EncodeHintType.CHARACTER_SET);
#if !SILVERLIGHT || WINDOWS_PHONE
var encoding = hints == null || !hints.ContainsKey(EncodeHintType.CHARACTER_SET) ? null : (String)hints[EncodeHintType.CHARACTER_SET];
if (encoding == null)
{
encoding = DEFAULT_BYTE_MODE_ENCODING;
}
var generateECI = hasEncodingHint || !DEFAULT_BYTE_MODE_ENCODING.Equals(encoding);
#else
// Silverlight supports only UTF-8 and UTF-16 out-of-the-box
const string encoding = "UTF-8";
// caller of the method can only control if the ECI segment should be written
// character set is fixed to UTF-8; but some scanners doesn't like the ECI segment
var generateECI = hasEncodingHint;
#endif
// Pick an encoding mode appropriate for the content. Note that this will not attempt to use
// multiple modes / segments even if that were more efficient. Twould be nice.
var mode = chooseMode(content, encoding);
// This will store the header information, like mode and
// length, as well as "header" segments like an ECI segment.
var headerBits = new BitArray();
// Append ECI segment if applicable
if (mode == Mode.BYTE && generateECI)
{
var eci = CharacterSetECI.getCharacterSetECIByName(encoding);
if (eci != null)
{
var eciIsExplicitDisabled = (hints != null && hints.ContainsKey(EncodeHintType.DISABLE_ECI) && hints[EncodeHintType.DISABLE_ECI] != null && Convert.ToBoolean(hints[EncodeHintType.DISABLE_ECI].ToString()));
if (!eciIsExplicitDisabled)
{
appendECI(eci, headerBits);
}
}
}
// Append the FNC1 mode header for GS1 formatted data if applicable
var hasGS1FormatHint = hints != null && hints.ContainsKey(EncodeHintType.GS1_FORMAT);
if (hasGS1FormatHint && hints[EncodeHintType.GS1_FORMAT] != null && Convert.ToBoolean(hints[EncodeHintType.GS1_FORMAT].ToString()))
{
// GS1 formatted codes are prefixed with a FNC1 in first position mode header
appendModeInfo(Mode.FNC1_FIRST_POSITION, headerBits);
}
// (With ECI in place,) Write the mode marker
appendModeInfo(mode, headerBits);
// Collect data within the main segment, separately, to count its size if needed. Don't add it to
// main payload yet.
var dataBits = new BitArray();
appendBytes(content, mode, dataBits, encoding);
Version version;
if (hints != null && hints.ContainsKey(EncodeHintType.QR_VERSION))
{
int versionNumber = Int32.Parse(hints[EncodeHintType.QR_VERSION].ToString());
version = Version.getVersionForNumber(versionNumber);
int bitsNeeded = calculateBitsNeeded(mode, headerBits, dataBits, version);
if (!willFit(bitsNeeded, version, ecLevel))
{
throw new WriterException("Data too big for requested version");
}
}
else
{
version = recommendVersion(ecLevel, mode, headerBits, dataBits);
}
var headerAndDataBits = new BitArray();
headerAndDataBits.appendBitArray(headerBits);
// Find "length" of main segment and write it
var numLetters = mode == Mode.BYTE ? dataBits.SizeInBytes : content.Length;
appendLengthInfo(numLetters, version, mode, headerAndDataBits);
// Put data together into the overall payload
headerAndDataBits.appendBitArray(dataBits);
var ecBlocks = version.getECBlocksForLevel(ecLevel);
var numDataBytes = version.TotalCodewords - ecBlocks.TotalECCodewords;
// Terminate the bits properly.
terminateBits(numDataBytes, headerAndDataBits);
// Interleave data bits with error correction code.
var finalBits = interleaveWithECBytes(headerAndDataBits,
version.TotalCodewords,
numDataBytes,
ecBlocks.NumBlocks);
var qrCode = new QRCode
{
ECLevel = ecLevel,
Mode = mode,
Version = version
};
// Choose the mask pattern and set to "qrCode".
var dimension = version.DimensionForVersion;
var matrix = new ByteMatrix(dimension, dimension);
var maskPattern = chooseMaskPattern(finalBits, ecLevel, version, matrix);
qrCode.MaskPattern = maskPattern;
// Build the matrix and set it to "qrCode".
MatrixUtil.buildMatrix(finalBits, ecLevel, version, maskPattern, matrix);
qrCode.Matrix = matrix;
return(qrCode);
}
public static QRCode encode(String content,
ErrorCorrectionLevel ecLevel,
IDictionary hints)
{
// Determine what character encoding has been specified by the caller, if any
String encoding = hints == null || !hints.Contains(EncodeHintType.CHARACTER_SET) ? null : (String)hints[EncodeHintType.CHARACTER_SET];
if (encoding == null)
{
encoding = DEFAULT_BYTE_MODE_ENCODING;
}
bool doSelectMask = hints == null || !hints.Contains(EncodeHintType.QR_DO_MASK_SELECTION) ? false : (bool)hints[EncodeHintType.QR_DO_MASK_SELECTION];
// Pick an encoding mode appropriate for the content. Note that this will not attempt to use
// multiple modes / segments even if that were more efficient. Twould be nice.
Mode mode = chooseMode(content, encoding);
// This will store the header information, like mode and
// length, as well as "header" segments like an ECI segment.
BitArray headerBits = new BitArray();
// Append ECI segment if applicable
if (mode == Mode.BYTE && !DEFAULT_BYTE_MODE_ENCODING.Equals(encoding))
{
CharacterSetECI eci = CharacterSetECI.getCharacterSetECIByName(encoding);
if (eci != null)
{
appendECI(eci, headerBits);
}
}
// (With ECI in place,) Write the mode marker
appendModeInfo(mode, headerBits);
// Collect data within the main segment, separately, to count its size if needed. Don't add it to
// main payload yet.
BitArray dataBits = new BitArray();
appendBytes(content, mode, dataBits, encoding);
// Hard part: need to know version to know how many bits length takes. But need to know how many
// bits it takes to know version. To pick version size assume length takes maximum bits
int bitsNeeded = headerBits.Size
+ mode.getCharacterCountBits(Version.getVersionForNumber(40))
+ dataBits.Size;
Version version = chooseVersion(bitsNeeded, ecLevel);
BitArray headerAndDataBits = new BitArray();
headerAndDataBits.appendBitArray(headerBits);
// Find "length" of main segment and write it
int numLetters = mode == Mode.BYTE ? dataBits.SizeInBytes : content.Length;
appendLengthInfo(numLetters, version, mode, headerAndDataBits);
// Put data together into the overall payload
headerAndDataBits.appendBitArray(dataBits);
Version.ECBlocks ecBlocks = version.getECBlocksForLevel(ecLevel);
int numDataBytes = version.TotalCodewords - ecBlocks.TotalECCodewords;
// Terminate the bits properly.
terminateBits(numDataBytes, headerAndDataBits);
// Interleave data bits with error correction code.
BitArray finalBits = interleaveWithECBytes(headerAndDataBits,
version.TotalCodewords,
numDataBytes,
ecBlocks.NumBlocks);
QRCode qrCode = new QRCode
{
ECLevel = ecLevel,
Mode = mode,
Version = version
};
// Choose the mask pattern and set to "qrCode".
int dimension = version.DimensionForVersion;
ByteMatrix matrix = new ByteMatrix(dimension, dimension);
int maskPattern = 3;
if (doSelectMask)
maskPattern = chooseMaskPattern(finalBits, ecLevel, version, matrix);
qrCode.MaskPattern = maskPattern;
// Build the matrix and set it to "qrCode".
MatrixUtil.buildMatrix(finalBits, ecLevel, version, maskPattern, matrix);
qrCode.Matrix = matrix;
return qrCode;
}
/// <summary>
/// Gets the EC blocks for level.
/// </summary>
/// <param name="ecLevel">The ec level.</param>
/// <returns></returns>
public ECBlocks getECBlocksForLevel(ErrorCorrectionLevel ecLevel)
{
return(ecBlocks[ecLevel.ordinal()]);
}
public static QRCode encode(String content,
ErrorCorrectionLevel ecLevel,
IDictionary hints)
{
// Determine what character encoding has been specified by the caller, if any
String encoding = hints == null || !hints.Contains(EncodeHintType.CHARACTER_SET) ? null : (String)hints[EncodeHintType.CHARACTER_SET];
if (encoding == null)
{
encoding = DEFAULT_BYTE_MODE_ENCODING;
}
bool doSelectMask = hints == null || !hints.Contains(EncodeHintType.QR_DO_MASK_SELECTION) ? false : (bool)hints[EncodeHintType.QR_DO_MASK_SELECTION];
// Pick an encoding mode appropriate for the content. Note that this will not attempt to use
// multiple modes / segments even if that were more efficient. Twould be nice.
Mode mode = chooseMode(content, encoding);
// This will store the header information, like mode and
// length, as well as "header" segments like an ECI segment.
BitArray headerBits = new BitArray();
// Append ECI segment if applicable
if (mode == Mode.BYTE && !DEFAULT_BYTE_MODE_ENCODING.Equals(encoding))
{
CharacterSetECI eci = CharacterSetECI.getCharacterSetECIByName(encoding);
if (eci != null)
{
appendECI(eci, headerBits);
}
}
// (With ECI in place,) Write the mode marker
appendModeInfo(mode, headerBits);
// Collect data within the main segment, separately, to count its size if needed. Don't add it to
// main payload yet.
BitArray dataBits = new BitArray();
appendBytes(content, mode, dataBits, encoding);
// Hard part: need to know version to know how many bits length takes. But need to know how many
// bits it takes to know version. To pick version size assume length takes maximum bits
int bitsNeeded = headerBits.Size
+ mode.getCharacterCountBits(Version.getVersionForNumber(40))
+ dataBits.Size;
Version version = chooseVersion(bitsNeeded, ecLevel);
BitArray headerAndDataBits = new BitArray();
headerAndDataBits.appendBitArray(headerBits);
// Find "length" of main segment and write it
int numLetters = mode == Mode.BYTE ? dataBits.SizeInBytes : content.Length;
appendLengthInfo(numLetters, version, mode, headerAndDataBits);
// Put data together into the overall payload
headerAndDataBits.appendBitArray(dataBits);
Version.ECBlocks ecBlocks = version.getECBlocksForLevel(ecLevel);
int numDataBytes = version.TotalCodewords - ecBlocks.TotalECCodewords;
// Terminate the bits properly.
terminateBits(numDataBytes, headerAndDataBits);
// Interleave data bits with error correction code.
BitArray finalBits = interleaveWithECBytes(headerAndDataBits,
version.TotalCodewords,
numDataBytes,
ecBlocks.NumBlocks);
QRCode qrCode = new QRCode
{
ECLevel = ecLevel,
Mode = mode,
Version = version
};
// Choose the mask pattern and set to "qrCode".
int dimension = version.DimensionForVersion;
ByteMatrix matrix = new ByteMatrix(dimension, dimension);
int maskPattern = 3;
if (doSelectMask)
{
maskPattern = chooseMaskPattern(finalBits, ecLevel, version, matrix);
}
qrCode.MaskPattern = maskPattern;
// Build the matrix and set it to "qrCode".
MatrixUtil.buildMatrix(finalBits, ecLevel, version, maskPattern, matrix);
qrCode.Matrix = matrix;
return(qrCode);
}
private static int GetSmallestVersion(int size, ErrorCorrectionLevel errorCorrectionLevel)
{
return Array.FindIndex(MaxQRSize[errorCorrectionLevel.ordinal()], i => i >= size) + 1;
}
/// <summary>
/// Encodes the specified content.
/// </summary>
/// <param name="content">The content.</param>
/// <param name="ecLevel">The ec level.</param>
/// <param name="hints">The hints.</param>
/// <returns></returns>
public static QRCode encode(String content,
ErrorCorrectionLevel ecLevel,
IDictionary <EncodeHintType, object> hints)
{
// Determine what character encoding has been specified by the caller, if any
#if !SILVERLIGHT || WINDOWS_PHONE
String encoding = hints == null || !hints.ContainsKey(EncodeHintType.CHARACTER_SET) ? null : (String)hints[EncodeHintType.CHARACTER_SET];
if (encoding == null)
{
encoding = DEFAULT_BYTE_MODE_ENCODING;
}
bool generateECI = !DEFAULT_BYTE_MODE_ENCODING.Equals(encoding);
#else
// Silverlight supports only UTF-8 and UTF-16 out-of-the-box
const string encoding = "UTF-8";
// caller of the method can only control if the ECI segment should be written
// character set is fixed to UTF-8; but some scanners doesn't like the ECI segment
bool generateECI = (hints != null && hints.ContainsKey(EncodeHintType.CHARACTER_SET));
#endif
// http://zxingnet.codeplex.com/discussions/399045
if (hints != null && hints.ContainsKey(EncodeHintType.DISABLE_ECI) && (bool)hints[EncodeHintType.DISABLE_ECI])
{
generateECI = false;
}
// Pick an encoding mode appropriate for the content. Note that this will not attempt to use
// multiple modes / segments even if that were more efficient. Twould be nice.
Mode mode = chooseMode(content, encoding);
// This will store the header information, like mode and
// length, as well as "header" segments like an ECI segment.
BitArray headerBits = new BitArray();
// Append ECI segment if applicable
if (mode == Mode.BYTE && generateECI)
{
CharacterSetECI eci = CharacterSetECI.getCharacterSetECIByName(encoding);
if (eci != null)
{
appendECI(eci, headerBits);
}
}
// (With ECI in place,) Write the mode marker
appendModeInfo(mode, headerBits);
// Collect data within the main segment, separately, to count its size if needed. Don't add it to
// main payload yet.
BitArray dataBits = new BitArray();
appendBytes(content, mode, dataBits, encoding);
// Hard part: need to know version to know how many bits length takes. But need to know how many
// bits it takes to know version. First we take a guess at version by assuming version will be
// the minimum, 1:
int provisionalBitsNeeded = headerBits.Size
+ mode.getCharacterCountBits(Version.getVersionForNumber(1))
+ dataBits.Size;
Version provisionalVersion = chooseVersion(provisionalBitsNeeded, ecLevel);
// Use that guess to calculate the right version. I am still not sure this works in 100% of cases.
int bitsNeeded = headerBits.Size
+ mode.getCharacterCountBits(provisionalVersion)
+ dataBits.Size;
Version version = chooseVersion(bitsNeeded, ecLevel);
BitArray headerAndDataBits = new BitArray();
headerAndDataBits.appendBitArray(headerBits);
// Find "length" of main segment and write it
int numLetters = mode == Mode.BYTE ? dataBits.SizeInBytes : content.Length;
appendLengthInfo(numLetters, version, mode, headerAndDataBits);
// Put data together into the overall payload
headerAndDataBits.appendBitArray(dataBits);
Version.ECBlocks ecBlocks = version.getECBlocksForLevel(ecLevel);
int numDataBytes = version.TotalCodewords - ecBlocks.TotalECCodewords;
// Terminate the bits properly.
terminateBits(numDataBytes, headerAndDataBits);
// Interleave data bits with error correction code.
BitArray finalBits = interleaveWithECBytes(headerAndDataBits,
version.TotalCodewords,
numDataBytes,
ecBlocks.NumBlocks);
QRCode qrCode = new QRCode
{
ECLevel = ecLevel,
Mode = mode,
Version = version
};
// Choose the mask pattern and set to "qrCode".
int dimension = version.DimensionForVersion;
ByteMatrix matrix = new ByteMatrix(dimension, dimension);
int maskPattern = chooseMaskPattern(finalBits, ecLevel, version, matrix);
qrCode.MaskPattern = maskPattern;
// Build the matrix and set it to "qrCode".
MatrixUtil.buildMatrix(finalBits, ecLevel, version, maskPattern, matrix);
qrCode.Matrix = matrix;
return(qrCode);
}
/// <summary>
/// Encode "bytes" with the error correction level "ecLevel". The encoding mode will be chosen
/// internally by chooseMode(). On success, store the result in "qrCode".
/// We recommend you to use QRCode.EC_LEVEL_L (the lowest level) for
/// "getECLevel" since our primary use is to show QR code on desktop screens. We don't need very
/// strong error correction for this purpose.
/// Note that there is no way to encode bytes in MODE_KANJI. We might want to add EncodeWithMode()
/// with which clients can specify the encoding mode. For now, we don't need the functionality.
/// </summary>
/// <param name="content">text to encode</param>
/// <param name="ecLevel">error correction level to use</param>
/// <returns><see cref="QRCode"/> representing the encoded QR code</returns>
public static QRCode encode(String content, ErrorCorrectionLevel ecLevel)
{
return encode(content, ecLevel, null);
}
private static void compareToGoldenFile(String contents,
ErrorCorrectionLevel ecLevel,
int resolution,
String fileName)
{
var image = loadImage(fileName);
Assert.NotNull(image);
BitMatrix goldenResult = createMatrixFromImage(image);
Assert.NotNull(goldenResult);
QRCodeWriter writer = new QRCodeWriter();
IDictionary<EncodeHintType, Object> hints = new Dictionary<EncodeHintType, Object>();
hints[EncodeHintType.ERROR_CORRECTION] = ecLevel;
BitMatrix generatedResult = writer.encode(contents, BarcodeFormat.QR_CODE, resolution,
resolution, hints);
Assert.AreEqual(resolution, generatedResult.Width);
Assert.AreEqual(resolution, generatedResult.Height);
Assert.AreEqual(goldenResult, generatedResult);
}
private void cbErrorLevel_SelectedIndexChanged( object sender, EventArgs e )
{
if ( !this.Visible ) return;
string errorString = cbErrorLevel.SelectedItem.ToString();
if ( string.Equals( errorString, I18N._( "L" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.L;
}
else if ( string.Equals( errorString, I18N._( "M" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.M;
}
else if ( string.Equals( errorString, I18N._( "Q" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.Q;
}
else if ( string.Equals( errorString, I18N._( "H" ), StringComparison.CurrentCultureIgnoreCase ) )
{
errorLevel = ErrorCorrectionLevel.H;
}
else
{
errorLevel = ErrorCorrectionLevel.Q;
}
appSection.Settings["ErrorCorrectionLevel"].Value = errorString;
config.Save();
}
private static Version chooseVersion(int numInputBits, ErrorCorrectionLevel ecLevel)
{
// In the following comments, we use numbers of Version 7-H.
for (int versionNum = 1; versionNum <= 40; versionNum++)
{
Version version = Version.getVersionForNumber(versionNum);
// numBytes = 196
int numBytes = version.TotalCodewords;
// getNumECBytes = 130
Version.ECBlocks ecBlocks = version.getECBlocksForLevel(ecLevel);
int numEcBytes = ecBlocks.TotalECCodewords;
// getNumDataBytes = 196 - 130 = 66
int numDataBytes = numBytes - numEcBytes;
int totalInputBytes = (numInputBits + 7) / 8;
if (numDataBytes >= totalInputBytes)
{
return version;
}
}
throw new WriterException("Data too big");
}
/// <summary>
/// Creates a MinimalEncoder
/// </summary>
/// <param name="stringToEncode">The string to encode</param>
/// <param name="priorityCharset">The preferred <see cref="System.Text.Encoding"/>. When the value of the argument is null, the algorithm
/// * chooses charsets that leads to a minimal representation.Otherwise the algorithm will use the priority
/// * charset to encode any character in the input that can be encoded by it if the charset is among the
/// * supported charsets.</param>
/// <param name="isGS1"> {@code true} if a FNC1 is to be prepended; {@code false} otherwise</param>
/// <param name="ecLevel">The error correction level.</param>
public MinimalEncoder(String stringToEncode, Encoding priorityCharset, bool isGS1, ErrorCorrectionLevel ecLevel)
{
this.stringToEncode = stringToEncode;
this.isGS1 = isGS1;
this.ecLevel = ecLevel;
var neededEncoders = new List <Encoding>();
neededEncoders.Add(Clone(StringUtils.ISO88591_ENCODING));
var needUnicodeEncoder = priorityCharset != null && priorityCharset.WebName.StartsWith("UTF", StringComparison.OrdinalIgnoreCase);
for (int i = 0; i < stringToEncode.Length; i++)
{
bool canEnc = false;
foreach (var encoder in neededEncoders)
{
if (canEncode(encoder, stringToEncode[i]))
{
canEnc = true;
break;
}
}
if (!canEnc)
{
foreach (var encoder in ENCODERS)
{
if (canEncode(encoder, stringToEncode[i]))
{
neededEncoders.Add(encoder);
canEnc = true;
break;
}
}
}
if (!canEnc)
{
needUnicodeEncoder = true;
}
}
if (neededEncoders.Count == 1 && !needUnicodeEncoder)
{
encoders = new Encoding[] { neededEncoders[0] };
}
else
{
encoders = new Encoding[neededEncoders.Count + 2];
int index = 0;
foreach (var encoder in neededEncoders)
{
encoders[index++] = encoder;
}
encoders[index] = Clone(Encoding.UTF8);
encoders[index + 1] = Clone(Encoding.BigEndianUnicode);
}
int priorityEncoderIndexValue = -1;
if (priorityCharset != null)
{
for (int i = 0; i < encoders.Length; i++)
{
if (encoders[i] != null && priorityCharset.WebName.Equals(encoders[i].WebName))
{
priorityEncoderIndexValue = i;
break;
}
}
}
priorityEncoderIndex = priorityEncoderIndexValue;
}
/// <summary>
/// Encodes the specified content.
/// </summary>
/// <param name="content">The content.</param>
/// <param name="ecLevel">The ec level.</param>
/// <param name="hints">The hints.</param>
/// <returns></returns>
public static QRCode encode(String content,
ErrorCorrectionLevel ecLevel,
IDictionary<EncodeHintType, object> hints)
{
// Determine what character encoding has been specified by the caller, if any
#if !SILVERLIGHT || WINDOWS_PHONE
String encoding = hints == null || !hints.ContainsKey(EncodeHintType.CHARACTER_SET) ? null : (String)hints[EncodeHintType.CHARACTER_SET];
if (encoding == null)
{
encoding = DEFAULT_BYTE_MODE_ENCODING;
}
bool generateECI = !DEFAULT_BYTE_MODE_ENCODING.Equals(encoding);
#else
// Silverlight supports only UTF-8 and UTF-16 out-of-the-box
const string encoding = "UTF-8";
// caller of the method can only control if the ECI segment should be written
// character set is fixed to UTF-8; but some scanners doesn't like the ECI segment
bool generateECI = (hints != null && hints.ContainsKey(EncodeHintType.CHARACTER_SET));
#endif
// Pick an encoding mode appropriate for the content. Note that this will not attempt to use
// multiple modes / segments even if that were more efficient. Twould be nice.
Mode mode = chooseMode(content, encoding);
// This will store the header information, like mode and
// length, as well as "header" segments like an ECI segment.
BitArray headerBits = new BitArray();
// Append ECI segment if applicable
if (mode == Mode.BYTE && generateECI)
{
CharacterSetECI eci = CharacterSetECI.getCharacterSetECIByName(encoding);
if (eci != null)
{
var eciIsExplicitDisabled = (hints != null && hints.ContainsKey(EncodeHintType.DISABLE_ECI) ? (bool)hints[EncodeHintType.DISABLE_ECI] : false);
if (!eciIsExplicitDisabled)
{
appendECI(eci, headerBits);
}
}
}
// (With ECI in place,) Write the mode marker
appendModeInfo(mode, headerBits);
// Collect data within the main segment, separately, to count its size if needed. Don't add it to
// main payload yet.
BitArray dataBits = new BitArray();
appendBytes(content, mode, dataBits, encoding);
// Hard part: need to know version to know how many bits length takes. But need to know how many
// bits it takes to know version. First we take a guess at version by assuming version will be
// the minimum, 1:
int provisionalBitsNeeded = headerBits.Size
+ mode.getCharacterCountBits(Version.getVersionForNumber(1))
+ dataBits.Size;
Version provisionalVersion = chooseVersion(provisionalBitsNeeded, ecLevel);
// Use that guess to calculate the right version. I am still not sure this works in 100% of cases.
int bitsNeeded = headerBits.Size
+ mode.getCharacterCountBits(provisionalVersion)
+ dataBits.Size;
Version version = chooseVersion(bitsNeeded, ecLevel);
BitArray headerAndDataBits = new BitArray();
headerAndDataBits.appendBitArray(headerBits);
// Find "length" of main segment and write it
int numLetters = mode == Mode.BYTE ? dataBits.SizeInBytes : content.Length;
appendLengthInfo(numLetters, version, mode, headerAndDataBits);
// Put data together into the overall payload
headerAndDataBits.appendBitArray(dataBits);
Version.ECBlocks ecBlocks = version.getECBlocksForLevel(ecLevel);
int numDataBytes = version.TotalCodewords - ecBlocks.TotalECCodewords;
// Terminate the bits properly.
terminateBits(numDataBytes, headerAndDataBits);
// Interleave data bits with error correction code.
BitArray finalBits = interleaveWithECBytes(headerAndDataBits,
version.TotalCodewords,
numDataBytes,
ecBlocks.NumBlocks);
QRCode qrCode = new QRCode
{
ECLevel = ecLevel,
Mode = mode,
Version = version
};
// Choose the mask pattern and set to "qrCode".
int dimension = version.DimensionForVersion;
ByteMatrix matrix = new ByteMatrix(dimension, dimension);
int maskPattern = chooseMaskPattern(finalBits, ecLevel, version, matrix);
qrCode.MaskPattern = maskPattern;
// Build the matrix and set it to "qrCode".
MatrixUtil.buildMatrix(finalBits, ecLevel, version, maskPattern, matrix);
qrCode.Matrix = matrix;
return qrCode;
}
/// <summary>
/// Encodes the string minimally
/// </summary>
/// <param name="stringToEncode">The string to encode</param>
/// <param name="version">The preferred <see cref="Version"/>. A minimal version is computed(see
/// {@link ResultList#getVersion method} when the value of the argument is null</param>
/// <param name="priorityCharset">The preferred { @link Charset}. When the value of the argument is null, the algorithm
/// chooses charsets that leads to a minimal representation.Otherwise the algorithm will use the priority
/// charset to encode any character in the input that can be encoded by it if the charset is among the
/// supported charsets.</param>
/// <param name="isGS1">{ @code true} if a FNC1 is to be prepended;{ @code false}otherwise</param>
/// <param name="ecLevel">The error correction level.</param>
/// <returns>An instance of { @code ResultList}
/// representing the minimal solution.
/// @see ResultList#getBits
/// @see ResultList#getVersion
/// @see ResultList#getSize</returns>
public static ResultList encode(String stringToEncode, Version version, Encoding priorityCharset, bool isGS1, ErrorCorrectionLevel ecLevel)
{
return(new MinimalEncoder(stringToEncode, priorityCharset, isGS1, ecLevel).encode(version));
}
