/// <summary>
/// Truns all LEDs on and then off capturing
/// voltage values
/// </summary>
/// <returns>RGY on and off values</returns>
public double[] GetLEDsValues()
{
double[] values = new double[6];
// Trun power on
BatteryJig.Set_all_relays(false);
BatteryJig.Write_SingleDIO(BatteryJig.Relays.DUT, true);
SSHUtil ssh = Connect(_host);
try
{
bootWait(ssh);
enterShell(ssh);
bool state = true;
_red_led.Turn(state, ssh);
_yellow_led.Turn(state, ssh);
_green_led.Turn(state, ssh);
Thread.Sleep(500);
double vred_on = _red_led.Value;
double vgreen_on = _green_led.Value;
double vyellow_on = _yellow_led.Value;
state = false;
_red_led.Turn(state, ssh);
_yellow_led.Turn(state, ssh);
_green_led.Turn(state, ssh);
Thread.Sleep(500);
double vred_off = _red_led.Value;
double vgreen_off = _green_led.Value;
double vyellow_off = _yellow_led.Value;
int i = 0;
values[i++] = vred_on;
values[i++] = vgreen_on;
values[i++] = vyellow_on;
values[i++] = vred_off;
values[i++] = vgreen_off;
values[i++] = vyellow_off;
exitShell(ssh);
}
finally
{
ssh.Dispose();
}
return(values);
}
static int Main(string[] args)
{
//Console.WriteLine("Press Enter to continue");
//Console.Read();
_log.Info("App started");
var options = new Options();
var parser_options = new CommandLine.ParserSettings {
MutuallyExclusive = true
};
var parser = new CommandLine.Parser(parser_options);
var isValid = parser.ParseArguments(args, options);
if (!isValid)
{
Console.WriteLine(CommandLine.Text.HelpText.AutoBuild(options).ToString());
return(-1);
}
// Don't allow lower case serial
options.SMT_Serial = options.SMT_Serial.ToUpper();
Console.WriteLine("SMT Serial: " + options.SMT_Serial);
Console.WriteLine("Host: " + options.Host);
Console.WriteLine();
// Check board was passed diags
try
{
using (CLStoreEntities cx = new CLStoreEntities())
{
LowesHub h = cx.LowesHubs.Where(lh => lh.smt_serial == options.SMT_Serial).OrderByDescending(lh => lh.date).First();
string info = string.Format("Hub {0} last diags {1}", h.MacAddress.MAC.ToString("X"), h.date.ToString());
_log.Info(info);
}
}
catch (Exception ex)
{
_log.Fatal("Problem retrieving Hub diag info\r\n\r\n" + ex.Message + "\r\n" + ex.StackTrace);
return(-3);
}
if (options.CalibrateLEDs)
{
BatteryTest batcal = new BatteryTest(options.Host, options.SMT_Serial);
char save_option = 'n';
while (true)
{
Console.WriteLine("Getting LEDs values...\r\n");
double[] values = batcal.GetLEDsValues();
int i = 0;
Console.WriteLine("Red On : {0}", values[i++].ToString("G2"));
Console.WriteLine("Green On : {0}", values[i++].ToString("G2"));
Console.WriteLine("Yellow On: {0}", values[i++].ToString("G2"));
Console.WriteLine();
Console.WriteLine("Red Off : {0}", values[i++].ToString("G2"));
Console.WriteLine("Green Off : {0}", values[i++].ToString("G2"));
Console.WriteLine("Yellow Off: {0}", values[i++].ToString("G2"));
i = 0;
Properties.Settings.Default.LED_Red_On_Val = values[i++];
Properties.Settings.Default.LED_Green_On_Val = values[i++];
Properties.Settings.Default.LED_Yellow_On_Val = values[i++];
Properties.Settings.Default.LED_Red_Off_Val = values[i++];
Properties.Settings.Default.LED_Green_Off_Val = values[i++];
Properties.Settings.Default.LED_Yellow_Off_Val = values[i++];
Console.WriteLine("Save Values? (y/n/r):");
save_option = Convert.ToChar(Console.Read());
if (save_option != 'r')
{
break;
}
}
if (save_option == 'y')
{
Properties.Settings.Default.Save();
}
}
try
{
if (!options.NoJigMode)
{
BatteryTest battery_test = new BatteryTest(options.Host, options.SMT_Serial);
battery_test.InvalidateEnabled = !options.DisableInvalidate;
battery_test.Status_Event += Battery_test_Status_Event;
battery_test.LogFolder = Properties.Settings.Default.Log_Folder;
Directory.CreateDirectory(battery_test.LogFolder);
battery_test.LED_Red.OnVal = Properties.Settings.Default.LED_Red_On_Val;
battery_test.LED_Red.OffVal = Properties.Settings.Default.LED_Red_Off_Val;
battery_test.LED_Green.OnVal = Properties.Settings.Default.LED_Green_On_Val;
battery_test.LED_Green.OffVal = Properties.Settings.Default.LED_Green_Off_Val;
battery_test.LED_Yellow.OnVal = Properties.Settings.Default.LED_Yellow_On_Val;
battery_test.LED_Yellow.OffVal = Properties.Settings.Default.LED_Yellow_Off_Val;
battery_test.Run();
}
else
{
BatteryTestNoJig batery_test = new BatteryTestNoJig(options.Host, options.SMT_Serial);
batery_test.InvalidateEnabled = !options.DisableInvalidate;
batery_test.Status_Event += Baterytest_Status_Event;
batery_test.LogFolder = Properties.Settings.Default.Log_Folder;
Directory.CreateDirectory(batery_test.LogFolder);
batery_test.Run();
}
}
catch (Exception ex)
{
_log.Fatal(ex.Message + "\r\n" + ex.StackTrace);
return(-2);
}
finally
{
if (!options.NoJigMode)
{
BatteryJig.Set_all_relays(false);
}
}
_log.Info("All Tests Passed");
if (!options.PrintLabelDisabled)
{
_log.Info("Printing label...");
try
{
DataUtils.PrintHubLabel(
options.SMT_Serial,
Properties.Settings.Default.ZPL_Lable_File,
Properties.Settings.Default.Printer_Address);
}
catch (Exception ex)
{
_log.Fatal(ex.Message + "\r\n" + ex.StackTrace);
return(-2);
}
finally
{
}
}
return(0);
}
//# show battery
//Battery Information:
//Voltage: 1.10
//Maximum Voltage: 1.10
//Level: -1.00
public void Run()
{
// There seems to be a problem with the jigs I have not been able to discovered yet.
// The test should be to apply battery power fisrt, then main power and the board should boot.
// Does not happen in the jig.
// I'm able to sypply battery power using jig and manually connect main power to a transformer and
// it works. So it seems to be a problem with the jig and not the units.
fire_status("Cycle Power");
BatteryJig.Set_all_relays(false);
Thread.Sleep(500);
fire_status("Power on DUT");
BatteryJig.Write_SingleDIO(BatteryJig.Relays.DUT, true);
Thread.Sleep(1000);
fire_status("LED Boot Test...");
DateTime start = DateTime.Now;
LEDBootPatternTest();
TimeSpan ts_total = DateTime.Now - start;
int ts_towait = 4000 - (int)ts_total.TotalSeconds * 1000;
if (ts_towait > 0)
{
Thread.Sleep((int)ts_towait);
}
fire_status("Power on BATTERY");
BatteryJig.Write_SingleDIO(BatteryJig.Relays.BATT, true);
Thread.Sleep(1000);
// Try to connect
fire_status("Connecting...");
SSHUtil ssh = Connect(_host);
try
{
bootWait(ssh);
fire_status("Battery Test");
string data = ssh.WriteWait("show battery", "Level:", 3);
double volts = parseVolatge(data);
string msg = string.Format("Battery voltage before DUT power removed detected at {0}", volts);
fire_status(msg);
if (volts < 5.0)
{
msg = string.Format("Battery power before DUT power removed too low. Detected at {0}", volts);
throw new Exception(msg);
}
fire_status("DUT power off");
BatteryJig.Write_SingleDIO(BatteryJig.Relays.DUT, false);
Thread.Sleep(3000);
data = ssh.WriteWait("show battery", "Level:", 3);
volts = parseVolatge(data);
msg = string.Format("Battery voltage after DUT power removed detected at {0}", volts);
fire_status(msg);
if (volts < 4.0)
{
msg = string.Format("Battery power after DUT power removed too low. Detected at {0}", volts);
throw new Exception(msg);
}
fire_status("DUT power back on");
BatteryJig.Write_SingleDIO(BatteryJig.Relays.DUT, true);
Thread.Sleep(1000);
data = ssh.WriteWait("show battery", "Level:", 3);
volts = parseVolatge(data);
msg = string.Format("Battery voltage after DUT power re-applied at {0}", volts);
fire_status(msg);
if (volts < 5.0)
{
msg = string.Format("Battery power after DUT power ed too low. Detected at {0}", volts);
throw new Exception(msg);
}
SaveShowMfg(ssh);
if (InvalidateEnabled)
{
fire_status("Clean up...");
data = cleanup(ssh);
fire_status(data, Status_Level.Debug);
fire_status("Invalidate...");
//# boot invalidate
//Current partition has been invalidated!
ssh.WriteWait("boot invalidate", "Current partition has been invalidated!", 5);
fire_status("Reboot");
ssh.WriteWait("reboot", "The system is going down for reboot NOW");
BatteryJig.Write_SingleDIO(BatteryJig.Relays.BATT, false); // If batt is not off, we can't reboot (weird!)
Thread.Sleep(5000);
// Check for the boot LED pattern until it fails
fire_status("Wait for LED Boot pattern...");
LEDBootPatternTest();
fire_status("Wait for LED Boot pattern to change...");
start = DateTime.Now;
TimeSpan ts;
while (true)
{
try
{
LEDBootPatternTest();
Thread.Sleep(3000);
}
catch
{
break;
}
ts = DateTime.Now - start;
if (ts.TotalSeconds > 30)
{
throw new Exception("LED pattern did not changed");
}
}
ts = DateTime.Now - start;
// The LED patter should have changed
fire_status("LED pattern change detected after " + ts.Seconds + " seconds.");
fire_status("Wait for LED Inavlidated pattern...");
LEDInvalidatedPatternTest();
// Check our connection is not good anymore
fire_status("Test for not connected");
if (ssh.IsConnected)
{
throw new Exception("Our ssh is still connected. Are you sure the hub rebootted?");
}
// Now try to connect
// It should not let os
fire_status("Test connecting is not possible");
try
{
ssh.Connect();
}
catch (Exception ex)
{
msg = ex.Message;
}
// To revert using chipserver
//jumpered lowes hub
//power up
//root/a1
//mount /dev/mmcblk0p5 /mnt
//vi /mnt/bootindex
//# Change to 5
//sync
//umount /mnt
//# Remove jumper
//reboot
}
}
catch
{
throw;
}
finally
{
ssh.Dispose();
}
}
