/// <summary>
/// 创建紫色杀伤盒
/// </summary>
/// <param name="id"> 命令ID,用作字典key </param>
/// <param name="list">底面四点链表</param>
/// <param name="lower">下限高度</param>
/// <param name="Ceiling">上限高度</param>
public void CreateKillBox(List <Vector3> list, float lower, float Ceiling, Color color)
{
// 第一个杀伤盒
PhysicsMath.CheckVector(list);
Vector3[] vector3s1 = list.ToArray(); // 使数组逆时针排序
Mesh mesh0 = GLDraw.CreatePolygon(vector3s1, lower, color.Int32()); // 画出图形
// 第二个杀伤盒
List <Vector3> CeilingList = new List <Vector3>(); // 中层顶点集合
foreach (var item in list)
{
CeilingList.Add(item + Vector3.up * lower);
}
PhysicsMath.CheckVector(CeilingList);
Vector3[] vector3s2 = CeilingList.ToArray(); // 使数组逆时针排序
Mesh mesh1 = GLDraw.CreatePolygon(vector3s2, Ceiling - lower, color.Int32()); // 画出图形
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(mesh0, Matrix4x4.identity);
Graphics.DrawMeshNow(mesh1, Matrix4x4.identity);
});
}
/// <summary>
/// 创建圆柱形区域
/// </summary>
/// <param name="id"> 命令ID,用作字典key </param>
/// <param name="point"> 圆心点 </param>
/// <param name="radius"> 半径 </param>
/// <param name="height"> 高度 </param>
public void CreateCylinder(Vector3 point, float radius, float height, Color color)
{
Mesh mesh = GLDraw.CreateCylinder(point, radius, height, color.Int32()); // 画出图形
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(mesh, Matrix4x4.identity);
});
}
/// <summary>
/// 创建半圆形防空区域
/// </summary>
/// <param name="origin">中心点</param>
/// <param name="radius">半径</param>
/// <param name="angle">张角（默认90度）</param>
public void CreateHemisphere(Vector3 origin, float radius, Color color, int angle = 90)
{
Mesh mesh = GLDraw.CreateHemisphere(origin, radius, 90, color.Int32());
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(mesh, Matrix4x4.identity);
});
}
/// <summary>
/// 创建扇形防空区
/// </summary>
/// <param name="id"> 命令ID,用作字典key </param>
/// <param name="origin">起始点</param>
/// <param name="tarPoint">水平最远距离点</param>
/// <param name="alpha">横向张角</param>
/// <param name="theta">纵向张角</param>
public void CreateSector(Vector3 origin, Vector3 tarPoint, float alpha, float theta, Color color)
{
Vector3[] vertices = PhysicsMath.GetSectorPoints_2(origin, tarPoint, alpha, theta);
Mesh mesh = GLDraw.CreatePolygon(vertices, color.Int32());
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(mesh, Matrix4x4.identity);
});
}
/// <summary>
/// 创建通用多边形区域
/// </summary>
/// <param name="id"> 命令ID,用作字典key </param>
/// <param name="list">下底面点链表</param>
/// <param name="height">高度</param>
public void CreatePolygon(List <Vector3> list, float height, Color color)
{
PhysicsMath.CheckVector(list);
Vector3[] vector3s = list.ToArray(); // 使数组逆时针排序
Mesh mesh = GLDraw.CreatePolygon(vector3s, height, color.Int32()); // 画出图形
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(mesh, Matrix4x4.identity);
});
}
private void OnPostRender()
{
pos = transform.position + transform.forward * 10 + transform.up * 5 + transform.right * 7;
shapesMaterial.SetPass(0);
Graphics.DrawMeshNow(GLDraw.CreateArrow(Color.red, 1), pos, Quaternion.Euler(90, 0, 0));
GL.Begin(GL.LINES);
GL.Color(Color.red);
GL.Vertex(pos);
GL.Vertex(pos - Vector3.forward * 1);
GL.End();
}
/// <summary>
/// 创建空中走廊
/// </summary>
/// <param name="id"> 命令ID,用作字典key </param>
/// <param name="list">中心点链表</param>
/// <param name="width">宽度</param>
/// <param name="height">高度</param>
public void CreateAirCorridorSpace(List <Vector3> list, float width, float height, Color color)
{
//Vector3[] vertices = PhysicsMath.GetAirCorridorSpace(list, width, height); // 获取点集
//DrawTriangles.DrawAirCorridorSpace(vertices, meshFilter, lineRenderers); // 画出图形
Mesh mesh = GLDraw.CreateLineMesh(list, width, height, color.Int32());
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(mesh, Matrix4x4.identity);
});
}
/// <summary>
/// 创建两个圆柱，近距火力支援等待空域
/// </summary>
/// <param name="id"> 命令ID,用作字典key </param>
/// <param name="point">低点圆柱的底面圆心点</param>
/// <param name="radius">半径</param>
/// <param name="height">圆柱高度</param>
/// <param name="heightDifference">两个圆柱的高度差</param>
public void DoubleCylinder(Vector3 point, float radius, float height, float heightDifference, Color color)
{
// 下面圆柱
Mesh meshUp = GLDraw.CreateCylinder(point, radius, height, color.Int32());
// 上面圆柱
Vector3 highPoint = point + Vector3.up * (height + heightDifference);
Mesh meshDown = GLDraw.CreateCylinder(highPoint, radius, height);
m_GrahicsManager.AddGraphics(Camera.main, () =>
{
ShapeMaterial.SetPass(0);
Graphics.DrawMeshNow(meshUp, Matrix4x4.identity);
Graphics.DrawMeshNow(meshDown, Matrix4x4.identity);
});
}
public Resources(Color selectedColor)
{
lineMat = new Material(Shader.Find("RunTimeHandles/VertexColor"));
lineMat.color = Color.white;
quadeMat = new Material(Shader.Find("RunTimeHandles/VertexColor"));
quadeMat.color = Color.white;
shapMatRed = new Material(Shader.Find("RunTimeHandles/VertexColor"));
shapMatRed.color = Color.red;
shapMatBlue = new Material(Shader.Find("RunTimeHandles/VertexColor"));
shapMatBlue.color = Color.blue;
shapMatGreen = new Material(Shader.Find("RunTimeHandles/VertexColor"));
shapMatGreen.color = Color.green;
shapMatSelected = new Material(Shader.Find("RunTimeHandles/VertexColor"));
shapMatSelected.color = selectedColor;
arrowMesh = GLDraw.CreateArrow(Color.white, 1);
cubeMesh = GLDraw.CreateCube(Color.white, Vector3.zero, 1);
}