private void continuousTestMode(bool start)
{
if (start)
{
ev = new EVtestMode();
ev.Run(myCommands.Devices, myCommands);
}
else
{
ev.stop();
}
}
static void Main(string[] args)
{
Console.WriteLine("Laird Grand Blanc Wireless Charger EOL Version 4.1.3\nPress \"ctrl + c\" to exit the program\n");
if (args.Length == 2) //keeping for old way of entering the program
{
WcaDebugTester tester = new WcaDebugTester();
string comport = args[0];
globals.program = args[1];
if (File.Exists(globals.program))
{
tester.Run(comport, globals.program);
}
else
{
Console.WriteLine("File not found: " + globals.program);
}
}
if (args.Length == 3) //keeping for old way of entering the program and allowing the changing of the baud rate
{
globals.baud = Convert.ToInt32(args[2]);
WcaDebugTester tester = new WcaDebugTester();
string comport = args[0];
globals.program = args[1];
if (File.Exists(globals.program))
{
tester.Run(comport, globals.program);
}
else
{
Console.WriteLine("File not found: " + globals.program);
}
}
if (args.Length == 0) // main entry for program - this way will not let you program the device. for that you must put it in the arguments in the command prompt.
{
Program myProgram = new Program();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new LEDframeforCustomers(myProgram));
while (false)
{
Console.WriteLine("Select one of the Following:"); // for those who don't care about programming at the moment
Console.WriteLine("0: Enter programming mode.");
Console.WriteLine("1: Enter EOL test mode.");
Console.WriteLine("2: Enter EV test mode.");
Console.WriteLine("3: Change baud rate. (current is " + globals.baud + ")");
Console.WriteLine("4: Change Timeout (current is " + globals.timeout + "ms)");
Console.WriteLine("5: Enter firmware file for programming (" + globals.program + " selected)");
Console.WriteLine("6: Enter Programmer Debug mode (" + globals.debug + " selected)"); // for finding coil failure
Console.WriteLine("7: Enter Bootloader mode.");
ConsoleKeyInfo key;
key = Console.ReadKey();
if (key.KeyChar.ToString() == "0") //programming mode
{
WcaDebugTester tester = new WcaDebugTester();
Console.Write("\nPlease enter the COM Port for the device you want to use and press enter (ex: 23): ");
string comport = "COM" + Console.ReadLine();
while (true)
{
Console.WriteLine("\nPlease enter the new file name now.");
string temp = Console.ReadLine();
string[] arrayTemp = temp.Split('.');
if (arrayTemp.Length > 0 && arrayTemp[arrayTemp.Length - 1].ToUpper().Equals("S19"))
{
globals.program = temp;
break;
}
else
{
Console.WriteLine("File name entered incorrectly, please try again. (expecting a file name ending in \"s19\"");
}
}
globals.baud = 115200; // in order to program you must communicate to the dut in 115200. after that though you must change to 9600 because that is what the debug messages talk as.
tester.Run(comport, globals.program);
}
if (key.KeyChar.ToString() == "1") // eol mode
{
WcaDebugTester tester = new WcaDebugTester();
Console.Write("\nPlease enter the COM Port for the device you want to use and press enter (ex: 23): ");
string comport = "COM" + Console.ReadLine();
if (globals.program.Equals("none"))
{
globals.program = "";
}
tester.Run(comport, globals.program); // Run function requires 2 arguments, but since we aren't requiring people to enter a .S19 file for programming, i leave it like ""
break;
}
else if (key.KeyChar.ToString() == "2") // ev test mode
{
Console.WriteLine("Select one of the Following:");
Console.WriteLine("0: Enter Continuous EV Test mode");
Console.WriteLine("1: Enter Timed Test Mode");
ConsoleKeyInfo evkey;
evkey = Console.ReadKey();
if (evkey.KeyChar.ToString() == "0") // ev test mode
{
WcaDebugTester tester = new WcaDebugTester();
bool end = true;
string comms = "";
string ports = "";
string[] dacport = { "0", "8", "1", "9", "2", "10", "3", "11", "4", "12", "5", "13", "6", "14", "7" };// all analog input daq inputs in the order that they should be plugged in.
int dIndex = 0;
int cIndex = 0;
while (end) // loop for entering in multiple devices and related DAC port for EV testing.
{ // what is happening in this loop is I am appending to a string and using commas to separate them, that way I can split by the commas and make an array with
// the exact amount of elements that are needed.
Console.Write("\nPlease enter the COM Port for the Wireless Chargers you want to use press enter (ex: 24): ");
comms += "COM" + Console.ReadLine().ToUpper();
//Console.Write("Please enter the analog input for coil 0 of the above device: ");
//ports += Console.ReadLine().ToUpper();
//Console.Write("Please enter the analog input for coil 1 of the above device: ");
//ports += ("," + Console.ReadLine().ToUpper());
//Console.Write("Please enter the analog input for coil 2 of the above device: ");
//ports += ("," + Console.ReadLine().ToUpper());
cIndex = 0;
Console.Write("Do you wish to add another Wireless Charger? enter y or n\n");
if (Console.ReadKey().KeyChar.ToString().ToUpper() == "Y")
{
//ports += ",";
comms += ",";
}
else
{
end = false;
}
}
string[] comport = comms.Split(',');
//string[] dacport = ports.Split(',');
string[,] allDacPort = new string[comport.Length, 3];// this part is a little weird because each device needs 3 inputs from the DAC. so i just made a 2 dimensional array and stored them that way
int c = 0;
for (int a = 0; a < comport.Length; a++)
{
for (int b = 0; b < 3; b++)
{
allDacPort[a, b] = dacport[c];
c++;
}
}
EVtestMode EV = new EVtestMode();
//EV.Run(comport, allDacPort);
break;
}
else if (evkey.KeyChar.ToString() == "1") // timed test mode
{
Console.WriteLine("Select one of the Following:");
Console.WriteLine("0: Enter timed test with 14.5 hours normal, 6 hours no coils, 3.5 hours hours normal");
ConsoleKeyInfo timedkey;
timedkey = Console.ReadKey();
if (timedkey.KeyChar.ToString() == "0")
{
WcaDebugTester tester = new WcaDebugTester();
bool end = true;
string comms = "";
string ports = "";
string[] dacport = { "0", "8", "1", "9", "2", "10", "3", "11", "4", "12", "5", "13", "6", "14", "7" };// all analog input daq inputs in the order that they should be plugged in.
int dIndex = 0;
int cIndex = 0;
while (end) // loop for entering in multiple devices and related DAC port for EV testing.
{ // what is happening in this loop is I am appending to a string and using commas to separate them, that way I can split by the commas and make an array with
// the exact amount of elements that are needed.
Console.Write("\nPlease enter the COM Port for the Wireless Chargers you want to use press enter (ex: 24): ");
comms += "COM" + Console.ReadLine().ToUpper();
//Console.Write("Please enter the analog input for coil 0 of the above device: ");
//ports += Console.ReadLine().ToUpper();
//Console.Write("Please enter the analog input for coil 1 of the above device: ");
//ports += ("," + Console.ReadLine().ToUpper());
//Console.Write("Please enter the analog input for coil 2 of the above device: ");
//ports += ("," + Console.ReadLine().ToUpper());
cIndex = 0;
Console.Write("Do you wish to add another Wireless Charger? enter y or n\n");
if (Console.ReadKey().KeyChar.ToString().ToUpper() == "Y")
{
//ports += ",";
comms += ",";
}
else
{
end = false;
}
}
string[] comport = comms.Split(',');
//string[] dacport = ports.Split(',');
string[,] allDacPort = new string[comport.Length, 3];// this part is a little weird because each device needs 3 inputs from the DAC. so i just made a 2 dimensional array and stored them that way
int c = 0;
for (int a = 0; a < comport.Length; a++)
{
for (int b = 0; b < 3; b++)
{
allDacPort[a, b] = dacport[c];
c++;
}
}
TimedEVtest0 TE = new TimedEVtest0();
TE.Run(comport, allDacPort);
break;
}
}
}
else if (key.KeyChar.ToString() == "3") //select baud rate
{
Console.WriteLine("\nSelect the baud rate you wish to use.");
Console.WriteLine("1: 115200");
Console.WriteLine("2: 9600");
ConsoleKeyInfo mkey;
mkey = Console.ReadKey();
if (mkey.KeyChar.ToString() == "1")
{
globals.baud = 115200;
}
else if (mkey.KeyChar.ToString() == "2")
{
globals.baud = 9600;
}
else
{
Console.WriteLine("command not recognized");
}
}
else if (key.KeyChar.ToString() == "4") // change timeout time
{
Console.WriteLine("\nPlease enter the timeout time now (in milliseconds).");
globals.timeout = Convert.ToInt32(Console.ReadLine());
}
else if (key.KeyChar.ToString() == "5") // select programming file
{
Console.WriteLine("\nPlease enter the file name now.");
string temp = Console.ReadLine();
string[] arrayTemp = temp.Split('.');
if (arrayTemp.Length > 0 && arrayTemp[arrayTemp.Length - 1].ToUpper().Equals("S19"))
{
globals.program = temp;
}
else
{
Console.WriteLine("File name entered incorrectly");
}
}
else if (key.KeyChar.ToString() == "6") // select debug mode
{
globals.debug = true;
}
if (key.KeyChar.ToString() == "7") // enter bootloader mode
{
globals.baud = 115200;
WcaDebugTester tester = new WcaDebugTester();
Console.Write("\nPlease enter the COM Port for the device you want to use and press enter (ex: 23): ");
string comport = "COM" + Console.ReadLine();
if (globals.program.Equals("none"))
{
globals.program = "";
}
Console.WriteLine("\nPlease cycle power to device.");
tester.Run(comport, globals.program); // Run function requires 2 arguments, but since we aren't requiring people to enter a .S19 file for programming, i leave it like ""
break;
}
}
}
}
