/// <summary>
/// Constructor
/// </summary>
/// <param name="zonePerimeter">Perimeter of hte zone</param>
/// <param name="stayOutside">Polygons to stay outside of</param>
/// <param name="speedCommand">Recommended Speed command</param>
public ZoneBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand recommendedSpeedCommand)
{
this.zoneId = zoneId;
this.zonePerimeter = zonePerimeter;
this.stayOutside = stayOutside;
this.speedCommand = recommendedSpeedCommand;
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zonePerimeter">Perimeter of hte zone</param>
/// <param name="stayOutside">Polygons to stay outside of</param>
/// <param name="speedCommand">Recommended Speed command</param>
public ZoneBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand recommendedSpeedCommand)
{
this.zoneId = zoneId;
this.zonePerimeter = zonePerimeter;
this.stayOutside = stayOutside;
this.speedCommand = recommendedSpeedCommand;
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zoneId"></param>
/// <param name="zonePerimeter"></param>
/// <param name="stayOutside"></param>
/// <param name="speedCommand"></param>
/// <param name="recommendedPath"></param>
/// <param name="endingLeftBound"></param>
/// <param name="endingRightBound"></param>
public ZoneTravelingBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand speedCommand,
LinePath recommendedPath, LinePath endingLeftBound, LinePath endingRightBound)
: base(zoneId, zonePerimeter, stayOutside, speedCommand)
{
this.RecommendedPath = recommendedPath;
this.EndingLeftBound = endingLeftBound;
this.EndingRightBound = endingRightBound;
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zoneId"></param>
/// <param name="zonePerimeter"></param>
/// <param name="stayOutside"></param>
/// <param name="speedCommand"></param>
/// <param name="parkingSpotPath"></param>
/// <param name="spotLeftBound"></param>
/// <param name="spotRightBound"></param>
/// <param name="spotId"></param>
/// <param name="extraDistance"></param>
/// <param name="endingPolygon"></param>
/// <param name="orientations"></param>
public ZoneParkingPullOutBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand speedCommand,
LinePath parkingSpotPath, LinePath spotLeftBound, LinePath spotRightBound, ArbiterParkingSpotId spotId,
LinePath reversePath, LinePath finalLeftBound, LinePath finalRightBound)
: base(zoneId, zonePerimeter, stayOutside, speedCommand, parkingSpotPath, spotLeftBound, spotRightBound, spotId, 0.0)
{
this.RecommendedPullOutPath = reversePath;
this.EndingLeftBound = finalLeftBound;
this.EndingRightBound = finalRightBound;
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zoneId"></param>
/// <param name="zonePerimeter"></param>
/// <param name="stayOutside"></param>
/// <param name="speedCommand"></param>
/// <param name="parkingSpotPath"></param>
/// <param name="spotLeftBound"></param>
/// <param name="spotRightBound"></param>
/// <param name="spotId"></param>
/// <param name="extraDistance"></param>
public ZoneParkingBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand speedCommand,
LinePath parkingSpotPath, LinePath spotLeftBound, LinePath spotRightBound, ArbiterParkingSpotId spotId, double extraDistance)
: base(zoneId, zonePerimeter, stayOutside, speedCommand)
{
this.ParkingSpotPath = parkingSpotPath;
this.SpotLeftBound = spotLeftBound;
this.SpotRightBound = spotRightBound;
this.ParkingSpotId = spotId;
this.ExtraDistance = extraDistance;
}
protected void HandleBaseBehavior(ZoneBehavior b)
{
// storing everything in absolute coordinates
this.zonePerimeter = b.ZonePerimeter;
this.zoneBadRegions = b.StayOutside;
this.recommendedSpeed = b.RecommendedSpeed;
Services.UIService.PushPolygons(b.StayOutside, b.TimeStamp, "zone bad regions", false);
Services.UIService.PushPolygon(b.ZonePerimeter, b.TimeStamp, "zone perimeter", false);
}
/// <summary>
/// Gets parameterization
/// </summary>
/// <param name="lane"></param>
/// <param name="speed"></param>
/// <param name="distance"></param>
/// <param name="state"></param>
/// <returns></returns>
public TravelingParameters GetParameters(ArbiterLane lane, double speed, double distance, VehicleState state)
{
double distanceCutOff = CoreCommon.OperationslStopLineSearchDistance;
Maneuver m = new Maneuver();
SpeedCommand sc;
bool usingSpeed = true;
#region Distance Cutoff
// check if distance is less than cutoff
if (distance < distanceCutOff)
{
// default behavior
sc = new StopAtDistSpeedCommand(distance);
Behavior b = new StayInLaneBehavior(lane.LaneId, sc, new List<int>(), lane.LanePath(), lane.Width, lane.NumberOfLanesLeft(state.Front, true), lane.NumberOfLanesRight(state.Front, true));
// stopping so not using speed param
usingSpeed = false;
// standard behavior is fine for maneuver
m = new Maneuver(b, new StayInLaneState(lane, CoreCommon.CorePlanningState), TurnDecorators.NoDecorators, state.Timestamp);
}
#endregion
#region Outisde Distance Envelope
// not inside distance envalope
else
{
// get lane
ArbiterLane al = lane;
// default behavior
sc = new ScalarSpeedCommand(speed);
Behavior b = new StayInLaneBehavior(al.LaneId, sc, new List<int>(), al.LanePath(), al.Width, al.NumberOfLanesLeft(state.Front, true), al.NumberOfLanesRight(state.Front, true));
// standard behavior is fine for maneuver
m = new Maneuver(b, new StayInLaneState(al, CoreCommon.CorePlanningState), TurnDecorators.NoDecorators, state.Timestamp);
}
#endregion
#region Parameterize
// create new params
TravelingParameters tp = new TravelingParameters();
tp.Behavior = m.PrimaryBehavior;
tp.Decorators = m.PrimaryBehavior.Decorators;
tp.DistanceToGo = distance;
tp.NextState = m.PrimaryState;
tp.RecommendedSpeed = speed;
tp.Type = TravellingType.Navigation;
tp.UsingSpeed = usingSpeed;
tp.SpeedCommand = sc;
tp.VehiclesToIgnore = new List<int>();
// return navigation params
return tp;
#endregion
}
/// <summary>
/// Plan a lane change
/// </summary>
/// <param name="cls"></param>
/// <param name="initialManeuver"></param>
/// <param name="targetManeuver"></param>
/// <returns></returns>
public Maneuver PlanLaneChange(ChangeLanesState cls, VehicleState vehicleState, RoadPlan roadPlan,
List<ITacticalBlockage> blockages, List<ArbiterWaypoint> ignorable)
{
// check blockages
if (blockages != null && blockages.Count > 0 && blockages[0] is LaneChangeBlockage)
{
// create the blockage state
EncounteredBlockageState ebs = new EncounteredBlockageState(blockages[0], CoreCommon.CorePlanningState);
// go to a blockage handling tactical
return new Maneuver(new NullBehavior(), ebs, TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
// lanes of the lane change
ArbiterLane initial = cls.Parameters.Initial;
ArbiterLane target = cls.Parameters.Target;
#region Initial Forwards
if (!cls.Parameters.InitialOncoming)
{
ForwardReasoning initialReasoning = new ForwardReasoning(new LateralReasoning(null, SideObstacleSide.Driver), new LateralReasoning(null, SideObstacleSide.Driver), initial);
#region Target Forwards
if (!cls.Parameters.TargetOncoming)
{
// target reasoning
ForwardReasoning targetReasoning = new ForwardReasoning(new LateralReasoning(null, SideObstacleSide.Driver), new LateralReasoning(null, SideObstacleSide.Driver), target);
#region Navigation
if (cls.Parameters.Reason == LaneChangeReason.Navigation)
{
// parameters to follow
List<TravelingParameters> tps = new List<TravelingParameters>();
// vehicles to ignore
List<int> ignorableVehicles = new List<int>();
// params for forward lane
initialReasoning.ForwardManeuver(initial, vehicleState, roadPlan, blockages, ignorable);
TravelingParameters initialParams = initialReasoning.ForwardMonitor.ParameterizationHelper(initial, initial,
CoreCommon.Mission.MissionCheckpoints.Peek().WaypointId.Equals(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.WaypointId) ?
initial.WaypointList[initial.WaypointList.Count - 1].Position : roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Position,
vehicleState.Front, CoreCommon.CorePlanningState, vehicleState, initialReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle);
ArbiterOutput.Output("initial dist to go: " + initialParams.DistanceToGo.ToString("f3"));
if (initialParams.Type == TravellingType.Vehicle && !initialReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle.IsStopped)
{
tps.Add(initialParams);
}
else
tps.Add(initialReasoning.ForwardMonitor.NavigationParameters);
ignorableVehicles.AddRange(initialParams.VehiclesToIgnore);
// get params for the final lane
targetReasoning.ForwardManeuver(target, vehicleState, roadPlan, blockages, new List<ArbiterWaypoint>());
TravelingParameters targetParams = targetReasoning.ForwardMonitor.CurrentParameters;
tps.Add(targetParams);
ignorableVehicles.AddRange(targetParams.VehiclesToIgnore);
try
{
if (CoreCommon.Communications.GetVehicleSpeed().Value < 0.1 &&
targetParams.Type == TravellingType.Vehicle &&
targetReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle != null &&
targetReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle.QueuingState.Queuing == QueuingState.Failed)
{
return new Maneuver(new HoldBrakeBehavior(), new StayInLaneState(target, CoreCommon.CorePlanningState), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
}
catch (Exception) { }
ArbiterOutput.Output("target dist to go: " + targetParams.DistanceToGo.ToString("f3"));
// decorators
List<BehaviorDecorator> decorators = initial.LaneOnLeft != null && initial.LaneOnLeft.Equals(target) ? TurnDecorators.LeftTurnDecorator : TurnDecorators.RightTurnDecorator;
// distance
double distanceToGo = initial.DistanceBetween(vehicleState.Front, cls.Parameters.DepartUpperBound);
cls.Parameters.DistanceToDepartUpperBound = distanceToGo;
// check if need to modify distance to go
if (initialParams.Type == TravellingType.Vehicle && initialReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle.IsStopped)
{
double curDistToUpper = cls.Parameters.DistanceToDepartUpperBound;
double newVhcDistToUpper = initial.DistanceBetween(vehicleState.Front, initialReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle.ClosestPosition) - 2.0;
if (curDistToUpper > newVhcDistToUpper)
{
distanceToGo = newVhcDistToUpper;
}
}
// get final
tps.Sort();
// get the proper speed command
ScalarSpeedCommand sc = new ScalarSpeedCommand(tps[0].RecommendedSpeed);
if (sc.Speed < 8.84)
sc = new ScalarSpeedCommand(Math.Min(targetParams.RecommendedSpeed, 8.84));
// continue the lane change with the proper speed command
ChangeLaneBehavior clb = new ChangeLaneBehavior(initial.LaneId, target.LaneId, initial.LaneOnLeft != null && initial.LaneOnLeft.Equals(target), distanceToGo,
sc, targetParams.VehiclesToIgnore, initial.LanePath(), target.LanePath(), initial.Width, target.Width, initial.NumberOfLanesLeft(vehicleState.Front, true),
initial.NumberOfLanesRight(vehicleState.Front, true));
// standard maneuver
return new Maneuver(clb, CoreCommon.CorePlanningState, decorators, vehicleState.Timestamp);
}
#endregion
#region Failed Forwards
else if (cls.Parameters.Reason == LaneChangeReason.FailedForwardVehicle)
{
// parameters to follow
List<TravelingParameters> tps = new List<TravelingParameters>();
// vehicles to ignore
List<int> ignorableVehicles = new List<int>();
// params for forward lane
initialReasoning.ForwardManeuver(initial, vehicleState, roadPlan, blockages, ignorable);
TravelingParameters initialParams = initialReasoning.ForwardMonitor.ParameterizationHelper(initial, initial,
CoreCommon.Mission.MissionCheckpoints.Peek().WaypointId.Equals(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.WaypointId) ?
initial.WaypointList[initial.WaypointList.Count - 1].Position : roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Position,
vehicleState.Front, CoreCommon.CorePlanningState, vehicleState, null);
tps.Add(initialParams);
ignorableVehicles.AddRange(initialParams.VehiclesToIgnore);
// get params for the final lane
targetReasoning.ForwardManeuver(target, vehicleState, roadPlan, blockages, new List<ArbiterWaypoint>());
TravelingParameters targetParams = targetReasoning.ForwardMonitor.CurrentParameters;
tps.Add(targetParams);
ignorableVehicles.AddRange(targetParams.VehiclesToIgnore);
// decorators
List<BehaviorDecorator> decorators = initial.LaneOnLeft != null && initial.LaneOnLeft.Equals(target) ? TurnDecorators.LeftTurnDecorator : TurnDecorators.RightTurnDecorator;
// distance
double distanceToGo = initial.DistanceBetween(vehicleState.Front, cls.Parameters.DepartUpperBound);
cls.Parameters.DistanceToDepartUpperBound = distanceToGo;
// get final
tps.Sort();
// get the proper speed command
SpeedCommand sc = new ScalarSpeedCommand(tps[0].RecommendedSpeed);
// continue the lane change with the proper speed command
ChangeLaneBehavior clb = new ChangeLaneBehavior(initial.LaneId, target.LaneId, initial.LaneOnLeft != null && initial.LaneOnLeft.Equals(target), distanceToGo,
sc, targetParams.VehiclesToIgnore, initial.LanePath(), target.LanePath(), initial.Width, target.Width, initial.NumberOfLanesLeft(vehicleState.Front, true),
initial.NumberOfLanesRight(vehicleState.Front, true));
// standard maneuver
return new Maneuver(clb, CoreCommon.CorePlanningState, decorators, vehicleState.Timestamp);
}
#endregion
#region Slow
else if (cls.Parameters.Reason == LaneChangeReason.SlowForwardVehicle)
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
#endregion
else
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
}
#endregion
#region Target Oncoming
else
{
OpposingReasoning targetReasoning = new OpposingReasoning(new OpposingLateralReasoning(null, SideObstacleSide.Driver), new OpposingLateralReasoning(null, SideObstacleSide.Driver), target);
#region Failed Forward
if (cls.Parameters.Reason == LaneChangeReason.FailedForwardVehicle)
{
// parameters to follow
List<TravelingParameters> tps = new List<TravelingParameters>();
// ignore the forward vehicle but keep params for forward lane
initialReasoning.ForwardManeuver(initial, vehicleState, roadPlan, blockages, ignorable);
TravelingParameters initialParams = initialReasoning.ForwardMonitor.ParameterizationHelper(initial, initial,
CoreCommon.Mission.MissionCheckpoints.Peek().WaypointId.Equals(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.WaypointId) ?
initial.WaypointList[initial.WaypointList.Count-1].Position : roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Position, vehicleState.Front, CoreCommon.CorePlanningState, vehicleState, null);
tps.Add(initialParams);
// get params for the final lane
targetReasoning.ForwardManeuver(target, initial, vehicleState, roadPlan, blockages);
TravelingParameters targetParams = targetReasoning.OpposingForwardMonitor.CurrentParamters.Value;
tps.Add(targetParams);
// decorators
List<BehaviorDecorator> decorators = cls.Parameters.ToLeft ? TurnDecorators.LeftTurnDecorator : TurnDecorators.RightTurnDecorator;
// distance
double distanceToGo = initial.DistanceBetween(vehicleState.Front, cls.Parameters.DepartUpperBound);
cls.Parameters.DistanceToDepartUpperBound = distanceToGo;
// get final
tps.Sort();
// get the proper speed command
SpeedCommand sc = new ScalarSpeedCommand(Math.Min(tps[0].RecommendedSpeed, 2.24));
// check final for stopped failed opposing
VehicleAgent forwardVa = targetReasoning.OpposingForwardMonitor.ForwardVehicle.CurrentVehicle;
if (forwardVa != null)
{
// dist between
double distToFV = -targetReasoning.Lane.DistanceBetween(vehicleState.Front, forwardVa.ClosestPosition);
// check stopped
bool stopped = Math.Abs(CoreCommon.Communications.GetVehicleSpeed().Value) < 0.5;
// check distance
bool distOk = distToFV < 2.5 * TahoeParams.VL;
// check failed
bool failed = forwardVa.QueuingState.Queuing == QueuingState.Failed;
// notify
ArbiterOutput.Output("Forward Vehicle: Stopped: " + stopped.ToString() + ", DistOk: " + distOk.ToString() + ", Failed: " + failed.ToString());
// check all for failed
if (stopped && distOk && failed)
{
// check inside target
if (target.LanePolygon.IsInside(vehicleState.Front))
{
// blockage recovery
StayInLaneState sils = new StayInLaneState(initial, CoreCommon.CorePlanningState);
StayInLaneBehavior silb = new StayInLaneBehavior(initial.LaneId, new StopAtDistSpeedCommand(TahoeParams.VL * 2.0, true), new List<int>(), initial.LanePath(), initial.Width, initial.NumberOfLanesLeft(vehicleState.Front, false), initial.NumberOfLanesRight(vehicleState.Front, false));
BlockageRecoveryState brs = new BlockageRecoveryState(silb, sils, sils, BlockageRecoveryDEFCON.REVERSE,
new EncounteredBlockageState(new LaneBlockage(new TrajectoryBlockedReport(CompletionResult.Stopped, 4.0, BlockageType.Static, -1, true, silb.GetType())), sils, BlockageRecoveryDEFCON.INITIAL, SAUDILevel.None),
BlockageRecoverySTATUS.EXECUTING);
return new Maneuver(silb, brs, TurnDecorators.HazardDecorator, vehicleState.Timestamp);
}
// check which lane we are in
else
{
// return to forward lane
return new Maneuver(new HoldBrakeBehavior(), new StayInLaneState(initial, CoreCommon.CorePlanningState), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
}
}
// continue the lane change with the proper speed command
ChangeLaneBehavior clb = new ChangeLaneBehavior(initial.LaneId, target.LaneId, cls.Parameters.ToLeft, distanceToGo,
sc, targetParams.VehiclesToIgnore, initial.LanePath(), target.ReversePath, initial.Width, target.Width, initial.NumberOfLanesLeft(vehicleState.Front, true),
initial.NumberOfLanesRight(vehicleState.Front, true));
// standard maneuver
return new Maneuver(clb, CoreCommon.CorePlanningState, decorators, vehicleState.Timestamp);
}
#endregion
#region Other
else if (cls.Parameters.Reason == LaneChangeReason.Navigation)
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
else if (cls.Parameters.Reason == LaneChangeReason.SlowForwardVehicle)
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
else
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
#endregion
}
#endregion
}
#endregion
#region Initial Oncoming
else
{
OpposingReasoning initialReasoning = new OpposingReasoning(new OpposingLateralReasoning(null, SideObstacleSide.Driver), new OpposingLateralReasoning(null, SideObstacleSide.Driver), initial);
#region Target Forwards
if (!cls.Parameters.TargetOncoming)
{
ForwardReasoning targetReasoning = new ForwardReasoning(new LateralReasoning(null, SideObstacleSide.Driver), new LateralReasoning(null, SideObstacleSide.Driver), target);
if (cls.Parameters.Reason == LaneChangeReason.FailedForwardVehicle)
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
#region Navigation
else if (cls.Parameters.Reason == LaneChangeReason.Navigation)
{
// parameters to follow
List<TravelingParameters> tps = new List<TravelingParameters>();
// distance to the upper bound of the change
double distanceToGo = target.DistanceBetween(vehicleState.Front, cls.Parameters.DepartUpperBound);
cls.Parameters.DistanceToDepartUpperBound = distanceToGo;
// get params for the initial lane
initialReasoning.ForwardManeuver(initial, target, vehicleState, roadPlan, blockages);
// current params of the fqm
TravelingParameters initialParams = initialReasoning.OpposingForwardMonitor.CurrentParamters.Value;
if (initialParams.Type == TravellingType.Vehicle)
{
if(!initialReasoning.OpposingForwardMonitor.ForwardVehicle.CurrentVehicle.IsStopped)
tps.Add(initialParams);
else
{
tps.Add(initialReasoning.OpposingForwardMonitor.NaviationParameters);
distanceToGo = initial.DistanceBetween(initialReasoning.OpposingForwardMonitor.ForwardVehicle.CurrentVehicle.ClosestPosition, vehicleState.Front) - TahoeParams.VL;
}
}
else
tps.Add(initialReasoning.OpposingForwardMonitor.NaviationParameters);
// get params for forward lane
targetReasoning.ForwardManeuver(target, vehicleState, roadPlan, blockages, ignorable);
TravelingParameters targetParams = targetReasoning.ForwardMonitor.ParameterizationHelper(target, target,
CoreCommon.Mission.MissionCheckpoints.Peek().WaypointId.Equals(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.WaypointId) ?
target.WaypointList[target.WaypointList.Count-1].Position : roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Position,
vehicleState.Front, CoreCommon.CorePlanningState, vehicleState, targetReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle);
tps.Add(targetParams);
// ignoring vehicles add
List<int> ignoreVehicles = initialParams.VehiclesToIgnore;
ignoreVehicles.AddRange(targetParams.VehiclesToIgnore);
// decorators
List<BehaviorDecorator> decorators = !cls.Parameters.ToLeft ? TurnDecorators.RightTurnDecorator : TurnDecorators.LeftTurnDecorator;
// get final
tps.Sort();
// get the proper speed command
SpeedCommand sc = tps[0].SpeedCommand;
if (sc is StopAtDistSpeedCommand)
{
sc = new ScalarSpeedCommand(0.0);
}
// check final for stopped failed opposing
VehicleAgent forwardVa = targetReasoning.ForwardMonitor.ForwardVehicle.CurrentVehicle;
if (forwardVa != null)
{
// dist between
double distToFV = targetReasoning.Lane.DistanceBetween(vehicleState.Front, forwardVa.ClosestPosition);
// check stopped
bool stopped = Math.Abs(CoreCommon.Communications.GetVehicleSpeed().Value) < 0.5;
// check distance
bool distOk = distToFV < 2.5 * TahoeParams.VL;
// check failed
bool failed = forwardVa.QueuingState.Queuing == QueuingState.Failed;
// notify
ArbiterOutput.Output("Forward Vehicle: Stopped: " + stopped.ToString() + ", DistOk: " + distOk.ToString() + ", Failed: " + failed.ToString());
// check all for failed
if (stopped && distOk && failed)
{
// check which lane we are in
if (initial.LanePolygon.IsInside(vehicleState.Front))
{
// return to opposing lane
return new Maneuver(new HoldBrakeBehavior(), new OpposingLanesState(initial, true, CoreCommon.CorePlanningState, vehicleState), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
else
{
// lane state
return new Maneuver(new HoldBrakeBehavior(), new StayInLaneState(target, CoreCommon.CorePlanningState), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
}
}
// continue the lane change with the proper speed command
ChangeLaneBehavior clb = new ChangeLaneBehavior(initial.LaneId, target.LaneId, cls.Parameters.ToLeft, distanceToGo,
sc, ignoreVehicles, initial.ReversePath, target.LanePath(), initial.Width, target.Width, initial.NumberOfLanesLeft(vehicleState.Front, false),
initial.NumberOfLanesRight(vehicleState.Front, false));
// standard maneuver
return new Maneuver(clb, CoreCommon.CorePlanningState, decorators, vehicleState.Timestamp);
}
#endregion
else if (cls.Parameters.Reason == LaneChangeReason.SlowForwardVehicle)
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
else
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
}
#endregion
else
{
// fallout exception
throw new Exception("currently unsupported lane change type");
}
}
#endregion
}
public OncomingVehicleDecorator(ScalarSpeedCommand secondarySpeed, double targetDistance, double targetSpeed)
{
this.secondarySpeed = secondarySpeed;
this.targetDistance = targetDistance;
this.targetSpeed = targetSpeed;
}
/// <summary>
/// Parameters to follow the forward vehicle
/// </summary>
/// <param name="lane"></param>
/// <param name="state"></param>
/// <returns></returns>
public TravelingParameters Follow(IFQMPlanable lane, VehicleState state, List<ArbiterWaypoint> ignorable)
{
// travelling parameters
TravelingParameters tp = new TravelingParameters();
// get control parameters
ForwardVehicleTrackingControl fvtc = GetControl(lane, state, ignorable);
this.ForwardControl = fvtc;
// initialize the parameters
tp.DistanceToGo = fvtc.xDistanceToGood;
tp.NextState = CoreCommon.CorePlanningState;
tp.RecommendedSpeed = fvtc.vFollowing;
tp.Type = TravellingType.Vehicle;
tp.Decorators = new List<BehaviorDecorator>();
// ignore the forward vehicles
tp.VehiclesToIgnore = this.VehiclesToIgnore;
#region Following Control
#region Immediate Stop
// need to stop immediately
if (fvtc.vFollowing == 0.0)
{
// speed command
SpeedCommand sc = new ScalarSpeedCommand(0.0);
tp.SpeedCommand = sc;
tp.UsingSpeed = true;
if (lane is ArbiterLane)
{
// standard path following behavior
ArbiterLane al = ((ArbiterLane)lane);
Behavior final = new StayInLaneBehavior(al.LaneId, sc, this.VehiclesToIgnore, al.LanePath(), al.Width, al.NumberOfLanesLeft(state.Front, true), al.NumberOfLanesRight(state.Front, true));
final.Decorators = tp.Decorators;
tp.Behavior = final;
}
else
{
SupraLane sl = (SupraLane)lane;
StayInSupraLaneState sisls = (StayInSupraLaneState)CoreCommon.CorePlanningState;
Behavior final = sisls.GetBehavior(sc, state.Front, this.VehiclesToIgnore);
final.Decorators = tp.Decorators;
tp.Behavior = final;
}
}
#endregion
#region Stopping at Distance
// stop at distance
else if (fvtc.vFollowing < 0.7 &&
CoreCommon.Communications.GetVehicleSpeed().Value <= 2.24 &&
fvtc.xSeparation > fvtc.xAbsMin)
{
// speed command
SpeedCommand sc = new StopAtDistSpeedCommand(fvtc.xDistanceToGood);
tp.SpeedCommand = sc;
tp.UsingSpeed = false;
if (lane is ArbiterLane)
{
ArbiterLane al = (ArbiterLane)lane;
// standard path following behavior
Behavior final = new StayInLaneBehavior(al.LaneId, sc, this.VehiclesToIgnore, lane.LanePath(), al.Width, al.NumberOfLanesLeft(state.Front, true), al.NumberOfLanesRight(state.Front, true));
final.Decorators = tp.Decorators;
tp.Behavior = final;
}
else
{
SupraLane sl = (SupraLane)lane;
StayInSupraLaneState sisls = (StayInSupraLaneState)CoreCommon.CorePlanningState;
Behavior final = sisls.GetBehavior(sc, state.Front, this.VehiclesToIgnore);
final.Decorators = tp.Decorators;
tp.Behavior = final;
}
}
#endregion
#region Normal Following
// else normal
else
{
// speed command
SpeedCommand sc = new ScalarSpeedCommand(fvtc.vFollowing);
tp.DistanceToGo = fvtc.xDistanceToGood;
tp.NextState = CoreCommon.CorePlanningState;
tp.RecommendedSpeed = fvtc.vFollowing;
tp.Type = TravellingType.Vehicle;
tp.UsingSpeed = true;
tp.SpeedCommand = sc;
if (lane is ArbiterLane)
{
ArbiterLane al = ((ArbiterLane)lane);
// standard path following behavior
Behavior final = new StayInLaneBehavior(al.LaneId, sc, this.VehiclesToIgnore, lane.LanePath(), al.Width, al.NumberOfLanesLeft(state.Front, true), al.NumberOfLanesRight(state.Front, true));
final.Decorators = tp.Decorators;
tp.Behavior = final;
}
else
{
SupraLane sl = (SupraLane)lane;
StayInSupraLaneState sisls = (StayInSupraLaneState)CoreCommon.CorePlanningState;
Behavior final = sisls.GetBehavior(sc, state.Front, this.VehiclesToIgnore);
final.Decorators = tp.Decorators;
tp.Behavior = final;
}
}
#endregion
#endregion
#region Check for Oncoming Vehicles
// check if need to add current lane oncoming vehicle decorator
if (false && this.CurrentVehicle.PassedDelayedBirth && fvtc.forwardOncoming && fvtc.xSeparation > TahoeParams.VL && fvtc.xSeparation < 30)
{
// check valid lane area
if (lane is ArbiterLane || ((SupraLane)lane).ClosestComponent(this.CurrentVehicle.ClosestPosition) == SLComponentType.Initial)
{
// get distance to and speed of the forward vehicle
double fvDistance = fvtc.xSeparation;
double fvSpeed = fvtc.vTarget;
// create the 5mph behavior
ScalarSpeedCommand updated = new ScalarSpeedCommand(2.24);
// set that we are using speed
tp.UsingSpeed = true;
tp.RecommendedSpeed = updated.Speed;
tp.DistanceToGo = fvtc.xSeparation;
// create the decorator
OncomingVehicleDecorator ovd = new OncomingVehicleDecorator(updated, fvDistance, fvSpeed);
// add the decorator
tp.Behavior.Decorators.Add(ovd);
tp.Decorators.Add(ovd);
}
}
#endregion
// set current
this.followingParameters = tp;
// return parameterization
return tp;
}
public override void Process(object param)
{
if (!base.BeginProcess()) {
return;
}
if (param is ZoneTravelingBehavior) {
HandleBaseBehavior((ZoneTravelingBehavior)param);
}
extraObstacles = GetPerimeterObstacles();
if (reverseGear) {
ProcessReverse();
return;
}
AbsoluteTransformer absTransform = Services.StateProvider.GetAbsoluteTransformer(curTimestamp);
// get the vehicle relative path
LinePath relRecommendedPath = recommendedPath.Transform(absTransform);
LinePath.PointOnPath zeroPoint = relRecommendedPath.ZeroPoint;
// get the distance to the end point
double distToEnd = relRecommendedPath.DistanceBetween(zeroPoint, relRecommendedPath.EndPoint);
// get the planning distance
double planningDist = GetPlanningDistance();
planningDist = Math.Max(planningDist, 20);
planningDist -= zeroPoint.Location.Length;
if (planningDist < 2.5)
planningDist = 2.5;
if (distToEnd < planningDist) {
// make the speed command at stop speed command
behaviorTimestamp = curTimestamp;
speedCommand = new StopAtDistSpeedCommand(distToEnd - TahoeParams.FL);
planningDist = distToEnd;
approachSpeed = recommendedSpeed.Speed;
settings.endingHeading = relRecommendedPath.EndSegment.UnitVector.ArcTan;
settings.endingPositionFixed = true;
settings.endingPositionMax = 2;
settings.endingPositionMin = -2;
}
else {
speedCommand = new ScalarSpeedCommand(recommendedSpeed.Speed);
}
// get the distance of the path segment we care about
LinePath pathSegment = relRecommendedPath.SubPath(zeroPoint, planningDist);
double avoidanceDist = planningDist + 5;
avoidanceBasePath = relRecommendedPath.SubPath(zeroPoint, ref avoidanceDist);
if (avoidanceDist > 0) {
avoidanceBasePath.Add(avoidanceBasePath.EndPoint.Location + avoidanceBasePath.EndSegment.Vector.Normalize(avoidanceDist));
}
// test if we should clear out of arc mode
if (arcMode) {
if (TestNormalModeClear(relRecommendedPath, zeroPoint)) {
prevCurvature = double.NaN;
arcMode = false;
}
}
if (Math.Abs(zeroPoint.AlongtrackDistance(Coordinates.Zero)) > 1) {
pathSegment.Insert(0, Coordinates.Zero);
}
else {
if (pathSegment[0].DistanceTo(pathSegment[1]) < 1) {
pathSegment.RemoveAt(0);
}
pathSegment[0] = Coordinates.Zero;
}
if (arcMode) {
Coordinates relativeGoalPoint = relRecommendedPath.EndPoint.Location;
ArcVoteZone(relativeGoalPoint, extraObstacles);
return;
}
double pathLength = pathSegment.PathLength;
if (pathLength < 6) {
double additionalDist = 6.25 - pathLength;
pathSegment.Add(pathSegment.EndPoint.Location + pathSegment.EndSegment.Vector.Normalize(additionalDist));
}
// determine if polygons are to the left or right of the path
for (int i = 0; i < zoneBadRegions.Length; i++) {
Polygon poly = zoneBadRegions[i].Transform(absTransform);
int numLeft = 0;
int numRight = 0;
foreach (LineSegment ls in pathSegment.GetSegmentEnumerator()) {
for (int j = 0; j < poly.Count; j++) {
if (ls.IsToLeft(poly[j])) {
numLeft++;
}
else {
numRight++;
}
}
}
if (numLeft > numRight) {
// we'll consider this polygon on the left of the path
//additionalLeftBounds.Add(new Boundary(poly, 0.1, 0.1, 0));
}
else {
//additionalRightBounds.Add(new Boundary(poly, 0.1, 0.1, 0));
}
}
// TODO: add zone perimeter
disablePathAngleCheck = false;
laneWidthAtPathEnd = 7;
settings.Options.w_diff = 3;
smootherBasePath = new LinePath();
smootherBasePath.Add(Coordinates.Zero);
smootherBasePath.Add(pathSegment.EndPoint.Location);
AddTargetPath(pathSegment, 0.005);
settings.maxSpeed = recommendedSpeed.Speed;
useAvoidancePath = false;
SmoothAndTrack(command_label, true);
}
/// <summary>
/// Plans over the zone
/// </summary>
/// <param name="planningState"></param>
/// <param name="navigationalPlan"></param>
/// <param name="vehicleState"></param>
/// <param name="vehicles"></param>
/// <param name="obstacles"></param>
/// <param name="blockages"></param>
/// <returns></returns>
public Maneuver Plan(IState planningState, INavigationalPlan navigationalPlan,
VehicleState vehicleState, SceneEstimatorTrackedClusterCollection vehicles,
SceneEstimatorUntrackedClusterCollection obstacles, List<ITacticalBlockage> blockages)
{
#region Zone Travelling State
if (planningState is ZoneTravelingState)
{
// check blockages
/*if (blockages != null && blockages.Count > 0 && blockages[0] is ZoneBlockage)
{
// create the blockage state
EncounteredBlockageState ebs = new EncounteredBlockageState(blockages[0], CoreCommon.CorePlanningState);
// go to a blockage handling tactical
return new Maneuver(new NullBehavior(), ebs, TurnDecorators.NoDecorators, vehicleState.Timestamp);
}*/
// cast state
ZoneState zs = (ZoneState)planningState;
// plan over state and zone
ZonePlan zp = (ZonePlan)navigationalPlan;
// check zone path does not exist
if (zp.RecommendedPath.Count < 2)
{
// zone startup again
ZoneStartupState zss = new ZoneStartupState(zs.Zone, true);
return new Maneuver(new HoldBrakeBehavior(), zss, TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
// final path seg
LinePath.PointOnPath endBack = zp.RecommendedPath.AdvancePoint(zp.RecommendedPath.EndPoint, -TahoeParams.VL);
LinePath lp = zp.RecommendedPath.SubPath(endBack, zp.RecommendedPath.EndPoint);
LinePath lB = lp.ShiftLateral(TahoeParams.T);
LinePath rB = lp.ShiftLateral(-TahoeParams.T);
// add to info
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(lB, ArbiterInformationDisplayObjectType.leftBound));
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(rB, ArbiterInformationDisplayObjectType.rightBound));
// get speed command
ScalarSpeedCommand sc = new ScalarSpeedCommand(2.24);
// Behavior
Behavior b = new ZoneTravelingBehavior(zp.Zone.ZoneId, zp.Zone.Perimeter.PerimeterPolygon, zp.Zone.StayOutAreas.ToArray(),
sc, zp.RecommendedPath, lB, rB);
// maneuver
return new Maneuver(b, CoreCommon.CorePlanningState, TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
#endregion
#region Parking State
else if (planningState is ParkingState)
{
// get state
ParkingState ps = (ParkingState)planningState;
// determine stay out areas to use
List<Polygon> stayOuts = new List<Polygon>();
foreach (Polygon p in ps.Zone.StayOutAreas)
{
if (!p.IsInside(ps.ParkingSpot.NormalWaypoint.Position) && !p.IsInside(ps.ParkingSpot.Checkpoint.Position))
stayOuts.Add(p);
}
LinePath rB = ps.ParkingSpot.GetRightBound();
LinePath lB = ps.ParkingSpot.GetLeftBound();
// add to info
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(lB, ArbiterInformationDisplayObjectType.leftBound));
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(rB, ArbiterInformationDisplayObjectType.rightBound));
// create behavior
ZoneParkingBehavior zpb = new ZoneParkingBehavior(ps.Zone.ZoneId, ps.Zone.Perimeter.PerimeterPolygon, stayOuts.ToArray(), new ScalarSpeedCommand(2.24),
ps.ParkingSpot.GetSpotPath(), lB, rB, ps.ParkingSpot.SpotId, 1.0);
// maneuver
return new Maneuver(zpb, ps, TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
#endregion
#region Pulling Out State
else if (planningState is PullingOutState)
{
// get state
PullingOutState pos = (PullingOutState)planningState;
// plan over state and zone
ZonePlan zp = (ZonePlan)navigationalPlan;
// final path seg
Coordinates endVec = zp.RecommendedPath[0] - zp.RecommendedPath[1];
Coordinates endBack = zp.RecommendedPath[0] + endVec.Normalize(TahoeParams.VL * 2.0);
LinePath rp = new LinePath(new Coordinates[]{pos.ParkingSpot.Checkpoint.Position, pos.ParkingSpot.NormalWaypoint.Position,
zp.RecommendedPath[0], endBack});
LinePath lp = new LinePath(new Coordinates[]{zp.RecommendedPath[0], endBack});
LinePath lB = lp.ShiftLateral(TahoeParams.T * 2.0);
LinePath rB = lp.ShiftLateral(-TahoeParams.T * 2.0);
// add to info
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(lB, ArbiterInformationDisplayObjectType.leftBound));
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(rB, ArbiterInformationDisplayObjectType.rightBound));
CoreCommon.CurrentInformation.DisplayObjects.Add(new ArbiterInformationDisplayObject(rp, ArbiterInformationDisplayObjectType.leftBound));
// determine stay out areas to use
List<Polygon> stayOuts = new List<Polygon>();
foreach (Polygon p in pos.Zone.StayOutAreas)
{
if (!p.IsInside(pos.ParkingSpot.NormalWaypoint.Position) && !p.IsInside(pos.ParkingSpot.Checkpoint.Position))
stayOuts.Add(p);
}
// get speed command
ScalarSpeedCommand sc = new ScalarSpeedCommand(2.24);
// Behavior
Behavior b = new ZoneParkingPullOutBehavior(zp.Zone.ZoneId, zp.Zone.Perimeter.PerimeterPolygon, stayOuts.ToArray(),
sc, pos.ParkingSpot.GetSpotPath(), pos.ParkingSpot.GetLeftBound(), pos.ParkingSpot.GetRightBound(), pos.ParkingSpot.SpotId,
rp, lB, rB);
// maneuver
return new Maneuver(b, pos, TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
#endregion
#region Zone Startup State
else if (planningState is ZoneStartupState)
{
// state
ZoneStartupState zss = (ZoneStartupState)planningState;
// get the zone
ArbiterZone az = zss.Zone;
// navigational edge
INavigableNode inn = CoreCommon.RoadNetwork.ArbiterWaypoints[CoreCommon.Mission.MissionCheckpoints.Peek().WaypointId];
// check over all the parking spaces
foreach (ArbiterParkingSpot aps in az.ParkingSpots)
{
// inside both parts of spot
if ((vehicleState.VehiclePolygon.IsInside(aps.NormalWaypoint.Position) && vehicleState.VehiclePolygon.IsInside(aps.Checkpoint.Position)) ||
(vehicleState.VehiclePolygon.IsInside(aps.NormalWaypoint.Position)))
{
// want to just park in it again
return new Maneuver(new HoldBrakeBehavior(), new ParkingState(az, aps), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
}
Polygon forwardPolygon = vehicleState.ForwardPolygon;
Polygon rearPolygon = vehicleState.RearPolygon;
Navigator nav = CoreCommon.Navigation;
List<ZoneNavigationEdgeSort> forwardForward = new List<ZoneNavigationEdgeSort>();
List<ZoneNavigationEdgeSort> reverseReverse = new List<ZoneNavigationEdgeSort>();
List<ZoneNavigationEdgeSort> perpendicularPerpendicular = new List<ZoneNavigationEdgeSort>();
List<ZoneNavigationEdgeSort> allEdges = new List<ZoneNavigationEdgeSort>();
List<ZoneNavigationEdgeSort> allEdgesNoLimits = new List<ZoneNavigationEdgeSort>();
foreach (NavigableEdge ne in az.NavigableEdges)
{
if (!(ne.End is ArbiterParkingSpotWaypoint) && !(ne.Start is ArbiterParkingSpotWaypoint))
{
// get distance to edge
LinePath lp = new LinePath(new Coordinates[] { ne.Start.Position, ne.End.Position });
double distTmp = lp.GetClosestPoint(vehicleState.Front).Location.DistanceTo(vehicleState.Front);
// get direction along segment
DirectionAlong da = vehicleState.DirectionAlongSegment(lp);
// check dist reasonable
if (distTmp > TahoeParams.VL)
{
// zone navigation edge sort item
ZoneNavigationEdgeSort znes = new ZoneNavigationEdgeSort(distTmp, ne, lp);
// add to lists
if (da == DirectionAlong.Forwards &&
(forwardPolygon.IsInside(ne.Start.Position) || forwardPolygon.IsInside(ne.End.Position)))
forwardForward.Add(znes);
/*else if (da == DirectionAlong.Perpendicular &&
!(forwardPolygon.IsInside(ne.Start.Position) || forwardPolygon.IsInside(ne.End.Position)) &&
!(rearPolygon.IsInside(ne.Start.Position) || rearPolygon.IsInside(ne.End.Position)))
perpendicularPerpendicular.Add(znes);
else if (rearPolygon.IsInside(ne.Start.Position) || rearPolygon.IsInside(ne.End.Position))
reverseReverse.Add(znes);*/
// add to all edges
allEdges.Add(znes);
}
}
}
// sort by distance
forwardForward.Sort();
reverseReverse.Sort();
perpendicularPerpendicular.Sort();
allEdges.Sort();
ZoneNavigationEdgeSort bestZnes = null;
for (int i = 0; i < allEdges.Count; i++)
{
// get line to initial
Line toInitial = new Line(vehicleState.Front, allEdges[i].edge.Start.Position);
Line toFinal = new Line(vehicleState.Front, allEdges[i].edge.End.Position);
bool intersects = false;
Coordinates[] interPts;
foreach (Polygon sop in az.StayOutAreas)
{
if (!intersects &&
(sop.Intersect(toInitial, out interPts) && sop.Intersect(toFinal, out interPts)))
intersects = true;
}
if (!intersects)
{
allEdges[i].zp = nav.PlanZone(az, allEdges[i].edge.End, inn);
allEdges[i].zp.Time += vehicleState.Front.DistanceTo(allEdges[i].lp.GetClosestPoint(vehicleState.Front).Location) / 2.24;
ZoneNavigationEdgeSort tmpZnes = allEdges[i];
if ((bestZnes == null && tmpZnes.zp.RecommendedPath.Count > 1) ||
(bestZnes != null && tmpZnes.zp.RecommendedPath.Count > 1 && tmpZnes.zp.Time < bestZnes.zp.Time))
bestZnes = tmpZnes;
}
if (i > allEdges.Count / 2 && bestZnes != null)
break;
}
if (bestZnes != null)
{
ArbiterOutput.Output("Found good edge to start in zone");
return new Maneuver(new HoldBrakeBehavior(), new ZoneOrientationState(az, bestZnes.edge), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
else
{
ArbiterOutput.Output("Could not find good edge to start, choosing random not blocked");
List<ZoneNavigationEdgeSort> okZnes = new List<ZoneNavigationEdgeSort>();
foreach (NavigableEdge tmpOk in az.NavigableEdges)
{
// get line to initial
LinePath edgePath = new LinePath(new Coordinates[] { tmpOk.Start.Position, tmpOk.End.Position });
double dist = edgePath.GetClosestPoint(vehicleState.Front).Location.DistanceTo(vehicleState.Front);
ZoneNavigationEdgeSort tmpZnes = new ZoneNavigationEdgeSort(dist, tmpOk, edgePath);
tmpZnes.zp = nav.PlanZone(az, tmpZnes.edge.End, inn);
tmpZnes.zp.Time += vehicleState.Front.DistanceTo(tmpZnes.lp.GetClosestPoint(vehicleState.Front).Location) / 2.24;
if (tmpZnes.zp.RecommendedPath.Count >= 2)
okZnes.Add(tmpZnes);
}
if (okZnes.Count == 0)
okZnes = allEdges;
else
okZnes.Sort();
// get random close edge
Random rand = new Random();
int chosen = rand.Next(Math.Min(5, okZnes.Count));
// get closest edge not part of a parking spot, get on it
NavigableEdge closest = okZnes[chosen].edge;//null;
//double distance = Double.MaxValue;
/*foreach (NavigableEdge ne in az.NavigableEdges)
{
if (!(ne.End is ArbiterParkingSpotWaypoint) && !(ne.Start is ArbiterParkingSpotWaypoint))
{
// get distance to edge
LinePath lp = new LinePath(new Coordinates[] { ne.Start.Position, ne.End.Position });
double distTmp = lp.GetClosestPoint(vehicleState.Front).Location.DistanceTo(vehicleState.Front);
if (closest == null || distTmp < distance)
{
closest = ne;
distance = distTmp;
}
}
}*/
return new Maneuver(new HoldBrakeBehavior(), new ZoneOrientationState(az, closest), TurnDecorators.NoDecorators, vehicleState.Timestamp);
}
}
#endregion
#region Unknown
else
{
// non-handled state
throw new ArgumentException("Unknown state", "CoreCommon.CorePlanningState");
}
#endregion
}
/// <summary>
/// Generates a default turn behavior
/// </summary>
/// <param name="initial"></param>
/// <param name="final"></param>
/// <param name="turn"></param>
/// <param name="vehicleState"></param>
/// <param name="relative"></param>
/// <returns></returns>
public static PathFollowingBehavior GenerateDefaultTurnBehavior(Lane initial, Lane final, Interconnect turn, bool relative)
{
CubicBezier[] spline;
if (turn.UserPartitions.Count == 2)
{
Coordinates p0 = turn.InitialWaypoint.PreviousLanePartition.InitialWaypoint.Position;
Coordinates p1 = turn.InitialWaypoint.Position;
Coordinates p2 = turn.UserPartitions[0].FinalWaypoint.Position;
Coordinates p3 = turn.FinalWaypoint.Position;
Coordinates p4 = turn.FinalWaypoint.NextLanePartition.FinalWaypoint.Position;
Coordinates[] pts = { p0, p1, p2, p3, p4 };
spline = SmoothingSpline.BuildC2Spline(pts, null, null, 0.5);
}
else if (turn.UserPartitions.Count > 2)
{
Coordinates p0 = turn.InitialWaypoint.PreviousLanePartition.InitialWaypoint.Position;
Coordinates p1 = turn.InitialWaypoint.Position;
Coordinates p0head = p0 - p1;
p0 = p1 + p0head.Normalize(4);
List<Coordinates> middleUsers = new List<Coordinates>();
for (int i = 0; i < turn.UserPartitions.Count - 1; i++)
{
middleUsers.Add(turn.UserPartitions[i].FinalWaypoint.Position);
}
Coordinates p2 = turn.FinalWaypoint.Position;
Coordinates p3 = turn.FinalWaypoint.NextLanePartition.FinalWaypoint.Position;
Coordinates p3head = p3 - p2;
p3 = p2 + p3head.Normalize(4);
List<Coordinates> finalList = new List<Coordinates>();
finalList.Add(p0);
finalList.Add(p1);
finalList.AddRange(middleUsers);
finalList.Add(p2);
finalList.Add(p3);
spline = SmoothingSpline.BuildC2Spline(finalList.ToArray(), null, null, 0.5);
}
else
{
Coordinates p0 = turn.InitialWaypoint.PreviousLanePartition.InitialWaypoint.Position;
Coordinates p1 = turn.InitialWaypoint.Position;
Coordinates p3 = turn.FinalWaypoint.Position;
Coordinates p4 = turn.FinalWaypoint.NextLanePartition.FinalWaypoint.Position;
Coordinates[] pts = { p0, p1, p3, p4 };
spline = SmoothingSpline.BuildC2Spline(pts, null, null, 0.5);
}
// Create the Path Segments
List<IPathSegment> bezierPathSegments = new List<IPathSegment>();
foreach (CubicBezier bezier in spline)
{
bezierPathSegments.Add(new BezierPathSegment(bezier, null, false));
}
// get the method from the road toolkit
//IPath turnPath = RoadToolkit.TurnPath(initial, final, turn, vehicleState, relative);// CHANGED
IPath turnPath = new Path(bezierPathSegments, CoordinateMode.AbsoluteProjected);
// make a speed command (set to 2m/s)
SpeedCommand speedCommand = new ScalarSpeedCommand(1);
// make behavior
//return new PathFollowingBehavior(turnPath, speedCommand);
return null;
}
public OncomingVehicleDecorator(ScalarSpeedCommand secondarySpeed, double targetDistance, double targetSpeed)
{
this.secondarySpeed = secondarySpeed;
this.targetDistance = targetDistance;
this.targetSpeed = targetSpeed;
}
/// <summary>
/// Makes new parameterization for nav
/// </summary>
/// <param name="lane"></param>
/// <param name="lanePlan"></param>
/// <param name="speed"></param>
/// <param name="distance"></param>
/// <param name="stopType"></param>
/// <returns></returns>
public TravelingParameters NavStopParameterization(IFQMPlanable lane, RoadPlan roadPlan, double speed, double distance,
ArbiterWaypoint stopWaypoint, StopType stopType, VehicleState state)
{
// get min dist
double distanceCutOff = stopType == StopType.StopLine ? CoreCommon.OperationslStopLineSearchDistance : CoreCommon.OperationalStopDistance;
#region Get Decorators
// turn direction default
ArbiterTurnDirection atd = ArbiterTurnDirection.Straight;
List<BehaviorDecorator> decorators = TurnDecorators.NoDecorators;
// check if need decorators
if (lane is ArbiterLane &&
stopWaypoint.Equals(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest) &&
roadPlan.BestPlan.laneWaypointOfInterest.IsExit &&
distance < 40.0)
{
if (roadPlan.BestPlan.laneWaypointOfInterest.BestExit == null)
ArbiterOutput.Output("NAV BUG: lanePlan.laneWaypointOfInterest.BestExit: FQM NavStopParameterization");
else
{
switch (roadPlan.BestPlan.laneWaypointOfInterest.BestExit.TurnDirection)
{
case ArbiterTurnDirection.Left:
decorators = TurnDecorators.LeftTurnDecorator;
atd = ArbiterTurnDirection.Left;
break;
case ArbiterTurnDirection.Right:
atd = ArbiterTurnDirection.Right;
decorators = TurnDecorators.RightTurnDecorator;
break;
case ArbiterTurnDirection.Straight:
atd = ArbiterTurnDirection.Straight;
decorators = TurnDecorators.NoDecorators;
break;
case ArbiterTurnDirection.UTurn:
atd = ArbiterTurnDirection.UTurn;
decorators = TurnDecorators.LeftTurnDecorator;
break;
}
}
}
else if (lane is SupraLane)
{
SupraLane sl = (SupraLane)lane;
double distToInterconnect = sl.DistanceBetween(state.Front, sl.Interconnect.InitialGeneric.Position);
if ((distToInterconnect > 0 && distToInterconnect < 40.0) || sl.ClosestComponent(state.Front) == SLComponentType.Interconnect)
{
switch (sl.Interconnect.TurnDirection)
{
case ArbiterTurnDirection.Left:
decorators = TurnDecorators.LeftTurnDecorator;
atd = ArbiterTurnDirection.Left;
break;
case ArbiterTurnDirection.Right:
atd = ArbiterTurnDirection.Right;
decorators = TurnDecorators.RightTurnDecorator;
break;
case ArbiterTurnDirection.Straight:
atd = ArbiterTurnDirection.Straight;
decorators = TurnDecorators.NoDecorators;
break;
case ArbiterTurnDirection.UTurn:
atd = ArbiterTurnDirection.UTurn;
decorators = TurnDecorators.LeftTurnDecorator;
break;
}
}
}
#endregion
#region Get Maneuver
Maneuver m = new Maneuver();
bool usingSpeed = true;
SpeedCommand sc = new StopAtDistSpeedCommand(distance);
#region Distance Cutoff
// check if distance is less than cutoff
if (distance < distanceCutOff && stopType != StopType.EndOfLane)
{
// default behavior
Behavior b = new StayInLaneBehavior(stopWaypoint.Lane.LaneId, new StopAtDistSpeedCommand(distance), new List<int>(), lane.LanePath(), stopWaypoint.Lane.Width, stopWaypoint.Lane.NumberOfLanesLeft(state.Front, true), stopWaypoint.Lane.NumberOfLanesRight(state.Front, true));
// stopping so not using speed param
usingSpeed = false;
// exit is next
if (stopType == StopType.Exit)
{
// exit means stopping at a good exit in our current lane
IState nextState = new StoppingAtExitState(stopWaypoint.Lane, stopWaypoint, atd, true, roadPlan.BestPlan.laneWaypointOfInterest.BestExit, state.Timestamp, state.Front);
m = new Maneuver(b, nextState, decorators, state.Timestamp);
}
// stop line is left
else if (stopType == StopType.StopLine)
{
// determine if hte stop line is the best exit
bool isNavExit = roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Equals(stopWaypoint);
// get turn direction
atd = isNavExit ? atd : ArbiterTurnDirection.Straight;
// predetermine interconnect if best exit
ArbiterInterconnect desired = null;
if (isNavExit)
desired = roadPlan.BestPlan.laneWaypointOfInterest.BestExit;
else if (stopWaypoint.NextPartition != null && state.Front.DistanceTo(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Position) > 25)
desired = stopWaypoint.NextPartition.ToInterconnect;
// set decorators
decorators = isNavExit ? decorators : TurnDecorators.NoDecorators;
// stop at the stop
IState nextState = new StoppingAtStopState(stopWaypoint.Lane, stopWaypoint, atd, isNavExit, desired);
b = new StayInLaneBehavior(stopWaypoint.Lane.LaneId, new StopAtLineSpeedCommand(), new List<int>(), lane.LanePath(), stopWaypoint.Lane.Width, stopWaypoint.Lane.NumberOfLanesLeft(state.Front, true), stopWaypoint.Lane.NumberOfLanesRight(state.Front, true));
m = new Maneuver(b, nextState, decorators, state.Timestamp);
sc = new StopAtLineSpeedCommand();
}
else if(stopType == StopType.LastGoal)
{
// stop at the last goal
IState nextState = new StayInLaneState(stopWaypoint.Lane, CoreCommon.CorePlanningState);
m = new Maneuver(b, nextState, decorators, state.Timestamp);
}
}
#endregion
#region Outisde Distance Envelope
// not inside distance envalope
else
{
// set speed
sc = new ScalarSpeedCommand(speed);
// check if lane
if (lane is ArbiterLane)
{
// get lane
ArbiterLane al = (ArbiterLane)lane;
// default behavior
Behavior b = new StayInLaneBehavior(al.LaneId, new ScalarSpeedCommand(speed), new List<int>(), al.LanePath(), al.Width, al.NumberOfLanesLeft(state.Front, true), al.NumberOfLanesRight(state.Front, true));
// standard behavior is fine for maneuver
m = new Maneuver(b, new StayInLaneState(al, CoreCommon.CorePlanningState), decorators, state.Timestamp);
}
// check if supra lane
else if (lane is SupraLane)
{
// get lane
SupraLane sl = (SupraLane)lane;
// get sl state
StayInSupraLaneState sisls = (StayInSupraLaneState)CoreCommon.CorePlanningState;
// get default beheavior
Behavior b = sisls.GetBehavior(new ScalarSpeedCommand(speed), state.Front, new List<int>());
// standard behavior is fine for maneuver
m = new Maneuver(b, sisls, decorators, state.Timestamp);
}
}
#endregion
#endregion
#region Parameterize
// create new params
TravelingParameters tp = new TravelingParameters();
tp.Behavior = m.PrimaryBehavior;
tp.Decorators = m.PrimaryBehavior.Decorators;
tp.DistanceToGo = distance;
tp.NextState = m.PrimaryState;
tp.RecommendedSpeed = speed;
tp.Type = TravellingType.Navigation;
tp.UsingSpeed = usingSpeed;
tp.SpeedCommand = sc;
tp.VehiclesToIgnore = new List<int>();
// return navigation params
return tp;
#endregion
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zoneId"></param>
/// <param name="zonePerimeter"></param>
/// <param name="stayOutside"></param>
/// <param name="speedCommand"></param>
/// <param name="parkingSpotPath"></param>
/// <param name="spotLeftBound"></param>
/// <param name="spotRightBound"></param>
/// <param name="spotId"></param>
/// <param name="extraDistance"></param>
public ZoneParkingBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand speedCommand,
LinePath parkingSpotPath, LinePath spotLeftBound, LinePath spotRightBound, ArbiterParkingSpotId spotId, double extraDistance)
: base(zoneId, zonePerimeter, stayOutside, speedCommand)
{
this.ParkingSpotPath = parkingSpotPath;
this.SpotLeftBound = spotLeftBound;
this.SpotRightBound = spotRightBound;
this.ParkingSpotId = spotId;
this.ExtraDistance = extraDistance;
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zoneId"></param>
/// <param name="zonePerimeter"></param>
/// <param name="stayOutside"></param>
/// <param name="speedCommand"></param>
/// <param name="parkingSpotPath"></param>
/// <param name="spotLeftBound"></param>
/// <param name="spotRightBound"></param>
/// <param name="spotId"></param>
/// <param name="extraDistance"></param>
/// <param name="endingPolygon"></param>
/// <param name="orientations"></param>
public ZoneParkingPullOutBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand speedCommand,
LinePath parkingSpotPath, LinePath spotLeftBound, LinePath spotRightBound, ArbiterParkingSpotId spotId,
LinePath reversePath, LinePath finalLeftBound, LinePath finalRightBound)
: base(zoneId, zonePerimeter, stayOutside, speedCommand, parkingSpotPath, spotLeftBound, spotRightBound, spotId, 0.0)
{
this.RecommendedPullOutPath = reversePath;
this.EndingLeftBound = finalLeftBound;
this.EndingRightBound = finalRightBound;
}
/// <summary>
/// Parameters to follow the forward vehicle
/// </summary>
/// <param name="lane"></param>
/// <param name="state"></param>
/// <returns></returns>
public TravelingParameters Follow(ArbiterLane lane, VehicleState state)
{
// travelling parameters
TravelingParameters tp = new TravelingParameters();
// ignorable obstacles
List<int> ignoreVehicle = new List<int>();
ignoreVehicle.Add(CurrentVehicle.VehicleId);
// get control parameters
ForwardVehicleTrackingControl fvtc = GetControl(lane, state);
// init params
tp.DistanceToGo = fvtc.xDistanceToGood;
tp.NextState = CoreCommon.CorePlanningState;
tp.RecommendedSpeed = fvtc.vFollowing;
tp.Type = TravellingType.Vehicle;
tp.Decorators = TurnDecorators.NoDecorators;
// flag to ignore forward vehicle
bool ignoreForward = false;
// reversed lane path
LinePath lp = lane.LanePath().Clone();
lp.Reverse();
#region Following Control
#region Immediate Stop
// need to stop immediately
if (fvtc.vFollowing == 0.0)
{
// don't ignore forward
ignoreForward = false;
// speed command
SpeedCommand sc = new ScalarSpeedCommand(0.0);
tp.UsingSpeed = true;
// standard path following behavior
Behavior final = new StayInLaneBehavior(lane.LaneId, sc, ignoreVehicle, lp, lane.Width, lane.NumberOfLanesLeft(state.Front, false), lane.NumberOfLanesRight(state.Front, false));
tp.Behavior = final;
tp.SpeedCommand = sc;
}
#endregion
#region Distance Stop
// stop at distance
else if (fvtc.vFollowing < 0.7 &&
CoreCommon.Communications.GetVehicleSpeed().Value <= 2.24 &&
fvtc.xSeparation > fvtc.xAbsMin)
{
// ignore forward vehicle
ignoreForward = true;
// speed command
SpeedCommand sc = new StopAtDistSpeedCommand(fvtc.xDistanceToGood);
tp.UsingSpeed = false;
// standard path following behavior
Behavior final = new StayInLaneBehavior(lane.LaneId, sc, ignoreVehicle, lp, lane.Width, lane.NumberOfLanesLeft(state.Front, false), lane.NumberOfLanesRight(state.Front, false));
tp.Behavior = final;
tp.SpeedCommand = sc;
}
#endregion
#region Normal Following
// else normal
else
{
// ignore the forward vehicle as we are tracking properly
ignoreForward = true;
// speed command
SpeedCommand sc = new ScalarSpeedCommand(fvtc.vFollowing);
tp.DistanceToGo = fvtc.xDistanceToGood;
tp.NextState = CoreCommon.CorePlanningState;
tp.RecommendedSpeed = fvtc.vFollowing;
tp.Type = TravellingType.Vehicle;
tp.UsingSpeed = true;
// standard path following behavior
Behavior final = new StayInLaneBehavior(lane.LaneId, sc, ignoreVehicle, lp, lane.Width, lane.NumberOfLanesLeft(state.Front, false), lane.NumberOfLanesRight(state.Front, false));
tp.Behavior = final;
tp.SpeedCommand = sc;
}
#endregion
#endregion
// check ignore
if (ignoreForward)
{
List<int> ignorable = new List<int>();
ignorable.Add(this.CurrentVehicle.VehicleId);
tp.VehiclesToIgnore = ignorable;
}
else
tp.VehiclesToIgnore = new List<int>();
// return parameterization
return tp;
}
/// <summary>
/// Behavior given we stay in the current lane
/// </summary>
/// <param name="lane"></param>
/// <param name="state"></param>
/// <param name="downstreamPoint"></param>
/// <returns></returns>
public TravelingParameters Primary(IFQMPlanable lane, VehicleState state, RoadPlan roadPlan,
List<ITacticalBlockage> blockages, List<ArbiterWaypoint> ignorable, bool log)
{
// possible parameterizations
List<TravelingParameters> tps = new List<TravelingParameters>();
#region Lane Major Parameterizations with Current Lane Goal Params, If Best Goal Exists in Current Lane
// check if the best goal is in the current lane
ArbiterWaypoint lanePoint = null;
if (lane.AreaComponents.Contains(roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest.Lane))
lanePoint = roadPlan.BestPlan.laneWaypointOfInterest.PointOfInterest;
// get the next thing we need to stop at no matter what and parameters for stopping at it
ArbiterWaypoint laneNavStop;
double laneNavStopSpeed;
double laneNavStopDistance;
StopType laneNavStopType;
this.NextNavigationalStop(lane, lanePoint, state.Front, state.ENCovariance, ignorable,
out laneNavStopSpeed, out laneNavStopDistance, out laneNavStopType, out laneNavStop);
// create parameterization of the stop
TravelingParameters laneNavParams = this.NavStopParameterization(lane, roadPlan, laneNavStopSpeed, laneNavStopDistance, laneNavStop, laneNavStopType, state);
this.navigationParameters = laneNavParams;
this.laneParameters = laneNavParams;
tps.Add(laneNavParams);
#region Log
if (log)
{
// add to current parames to arbiter information
CoreCommon.CurrentInformation.FQMBehavior = laneNavParams.Behavior.ToShortString();
CoreCommon.CurrentInformation.FQMBehaviorInfo = laneNavParams.Behavior.ShortBehaviorInformation();
CoreCommon.CurrentInformation.FQMSpeedCommand = laneNavParams.Behavior.SpeedCommandString();
CoreCommon.CurrentInformation.FQMDistance = laneNavParams.DistanceToGo.ToString("F6");
CoreCommon.CurrentInformation.FQMSpeed = laneNavParams.RecommendedSpeed.ToString("F6");
CoreCommon.CurrentInformation.FQMState = laneNavParams.NextState.ShortDescription();
CoreCommon.CurrentInformation.FQMStateInfo = laneNavParams.NextState.StateInformation();
CoreCommon.CurrentInformation.FQMStopType = laneNavStopType.ToString();
CoreCommon.CurrentInformation.FQMWaypoint = laneNavStop.ToString();
CoreCommon.CurrentInformation.FQMSegmentSpeedLimit = lane.CurrentMaximumSpeed(state.Position).ToString("F1");
}
#endregion
#endregion
#region Forward Vehicle Parameterization
// forward vehicle update
this.ForwardVehicle.Update(lane, state);
// clear current params
this.followingParameters = null;
// check not in a sparse area
bool sparseArea = lane is ArbiterLane ?
((ArbiterLane)lane).GetClosestPartition(state.Front).Type == PartitionType.Sparse :
((SupraLane)lane).ClosestComponent(state.Front) == SLComponentType.Initial && ((SupraLane)lane).Initial.GetClosestPartition(state.Front).Type == PartitionType.Sparse;
// exists forward vehicle
if (!sparseArea && this.ForwardVehicle.ShouldUseForwardTracker)
{
// get forward vehicle params, set lane decorators
TravelingParameters vehicleParams = this.ForwardVehicle.Follow(lane, state, ignorable);
vehicleParams.Behavior.Decorators.AddRange(this.laneParameters.Decorators);
this.FollowingParameters = vehicleParams;
#region Log
if (log)
{
// add to current parames to arbiter information
CoreCommon.CurrentInformation.FVTBehavior = vehicleParams.Behavior.ToShortString();
CoreCommon.CurrentInformation.FVTSpeed = this.ForwardVehicle.FollowingParameters.RecommendedSpeed.ToString("F3");
CoreCommon.CurrentInformation.FVTSpeedCommand = vehicleParams.Behavior.SpeedCommandString();
CoreCommon.CurrentInformation.FVTDistance = vehicleParams.DistanceToGo.ToString("F2");
CoreCommon.CurrentInformation.FVTState = vehicleParams.NextState.ShortDescription();
CoreCommon.CurrentInformation.FVTStateInfo = vehicleParams.NextState.StateInformation();
// set xSeparation
CoreCommon.CurrentInformation.FVTXSeparation = this.ForwardVehicle.ForwardControl.xSeparation.ToString("F0");
}
#endregion
// check if we're stopped behind fv, allow wait timer if true, stop wait timer if not behind fv
bool forwardVehicleStopped = this.ForwardVehicle.CurrentVehicle.IsStopped;
bool forwardSeparationGood = this.ForwardVehicle.ForwardControl.xSeparation < TahoeParams.VL * 2.5;
bool wereStopped = CoreCommon.Communications.GetVehicleSpeed().Value < 0.1;
bool forwardDistanceToGo = vehicleParams.DistanceToGo < 3.5;
if (forwardVehicleStopped && forwardSeparationGood && wereStopped && forwardDistanceToGo)
this.ForwardVehicle.StoppedBehindForwardVehicle = true;
else
{
this.ForwardVehicle.StoppedBehindForwardVehicle = false;
this.ForwardVehicle.CurrentVehicle.QueuingState.WaitTimer.Stop();
this.ForwardVehicle.CurrentVehicle.QueuingState.WaitTimer.Reset();
}
// add vehicle param
tps.Add(vehicleParams);
}
else
{
// no forward vehicle
this.followingParameters = null;
this.ForwardVehicle.StoppedBehindForwardVehicle = false;
}
#endregion
#region Sparse Waypoint Parameterization
// check for sparse waypoints downstream
bool sparseDownstream;
bool sparseNow;
double sparseDistance;
lane.SparseDetermination(state.Front, out sparseDownstream, out sparseNow, out sparseDistance);
// check if sparse areas downstream
if (sparseDownstream)
{
// set the distance to the sparse area
if (sparseNow)
sparseDistance = 0.0;
// get speed
double speed = SpeedTools.GenerateSpeed(sparseDistance, 2.24, lane.CurrentMaximumSpeed(state.Front));
// maneuver
Maneuver m = new Maneuver();
bool usingSpeed = true;
SpeedCommand sc = new ScalarSpeedCommand(speed);
#region Parameterize Given Speed Command
// check if lane
if (lane is ArbiterLane)
{
// get lane
ArbiterLane al = (ArbiterLane)lane;
// default behavior
Behavior b = new StayInLaneBehavior(al.LaneId, new ScalarSpeedCommand(speed), new List<int>(), al.LanePath(), al.Width, al.NumberOfLanesLeft(state.Front, true), al.NumberOfLanesRight(state.Front, true));
b.Decorators = this.laneParameters.Decorators;
// standard behavior is fine for maneuver
m = new Maneuver(b, new StayInLaneState(al, CoreCommon.CorePlanningState), this.laneParameters.Decorators, state.Timestamp);
}
// check if supra lane
else if (lane is SupraLane)
{
// get lane
SupraLane sl = (SupraLane)lane;
// get sl state
StayInSupraLaneState sisls = (StayInSupraLaneState)CoreCommon.CorePlanningState;
// get default beheavior
Behavior b = sisls.GetBehavior(new ScalarSpeedCommand(speed), state.Front, new List<int>());
b.Decorators = this.laneParameters.Decorators;
// standard behavior is fine for maneuver
m = new Maneuver(b, sisls, this.laneParameters.Decorators, state.Timestamp);
}
#endregion
#region Parameterize
// create new params
TravelingParameters tp = new TravelingParameters();
tp.Behavior = m.PrimaryBehavior;
tp.Decorators = this.laneParameters.Decorators;
tp.DistanceToGo = Double.MaxValue;
tp.NextState = m.PrimaryState;
tp.RecommendedSpeed = speed;
tp.Type = TravellingType.Navigation;
tp.UsingSpeed = usingSpeed;
tp.SpeedCommand = sc;
tp.VehiclesToIgnore = new List<int>();
// return navigation params
tps.Add(tp);
#endregion
}
#endregion
// sort params by most urgent
tps.Sort();
// set current params
this.currentParameters = tps[0];
// get behavior to check add vehicles to ignore
if (this.currentParameters.Behavior is StayInLaneBehavior)
((StayInLaneBehavior)this.currentParameters.Behavior).IgnorableObstacles = this.ForwardVehicle.VehiclesToIgnore;
// out of navigation, blockages, and vehicle following determine the actual primary parameters for this lane
return tps[0];
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="zoneId"></param>
/// <param name="zonePerimeter"></param>
/// <param name="stayOutside"></param>
/// <param name="speedCommand"></param>
/// <param name="recommendedPath"></param>
/// <param name="endingLeftBound"></param>
/// <param name="endingRightBound"></param>
public ZoneTravelingBehavior(ArbiterZoneId zoneId, Polygon zonePerimeter, Polygon[] stayOutside, ScalarSpeedCommand speedCommand,
LinePath recommendedPath, LinePath endingLeftBound, LinePath endingRightBound)
: base(zoneId, zonePerimeter, stayOutside, speedCommand)
{
this.RecommendedPath = recommendedPath;
this.EndingLeftBound = endingLeftBound;
this.EndingRightBound = endingRightBound;
}