public void OnDrawGizmos()
{
if (LocalDirection.Equals(Vector3.zero))
{
return;
}
var originalColor = Gizmos.color;
var originalMatrix = Gizmos.matrix;
Gizmos.color = Color.red;
// Calculate the final Physics Body runtime coordinate system which bakes out skew from non-uniform scaling in parent
var worldFromLocalRigidTransform = Math.DecomposeRigidBodyTransform(transform.localToWorldMatrix);
var worldFromLocal = Matrix4x4.TRS(worldFromLocalRigidTransform.pos, worldFromLocalRigidTransform.rot, Vector3.one);
Vector3 directionWorld = worldFromLocal.MultiplyVector(LocalDirection.normalized);
Vector3 offsetWorld = worldFromLocal.MultiplyPoint(LocalOffset);
// Calculate the final world Thrust coordinate system from the world Body transform and local offset and direction
Math.CalculatePerpendicularNormalized(directionWorld, out _, out var directionPerpendicular);
var worldFromThrust = Matrix4x4.TRS(offsetWorld, Quaternion.LookRotation(directionWorld, directionPerpendicular), Vector3.one);
Gizmos.matrix = worldFromThrust;
float Shift = Magnitude * 0.1f;
Gizmos.DrawFrustum(new Vector3(0, 0, -Shift), UnityEngine.Random.Range(1.0f, 2.5f), Magnitude, Shift, 1.0f);
Gizmos.matrix = originalMatrix;
Gizmos.color = originalColor;
}
protected override JobHandle OnUpdate(JobHandle inputDeps)
{
if (m_ContactModifierGroup.CalculateLength() == 0)
{
return(inputDeps);
}
if (m_StepPhysicsWorld.Simulation.Type == SimulationType.NoPhysics)
{
return(inputDeps);
}
SimulationCallbacks.Callback preparationCallback = (ref ISimulation simulation, JobHandle inDeps) =>
{
inDeps.Complete(); // shouldn't be needed (jobify the below)
SimulationData.Contacts.Iterator iterator = simulation.Contacts.GetIterator();
while (iterator.HasItemsLeft())
{
ContactHeader manifold = iterator.GetNextContactHeader();
// JacobianModifierFlags format for this example
// UserData 0 - soft contact
// UserData 1 - surface velocity
// UserData 2 - infinite inertia
// UserData 3 - no torque
// UserData 4 - clip impulse
// UserData 5 - disabled contact
if (0 != (manifold.BodyCustomDatas.CustomDataA & (byte)(1 << 0)) ||
0 != (manifold.BodyCustomDatas.CustomDataB & (byte)(1 << 0)))
{
manifold.JacobianFlags |= JacobianFlags.UserFlag0; // Soft Contact
}
if (0 != (manifold.BodyCustomDatas.CustomDataA & (byte)(1 << 1)) ||
0 != (manifold.BodyCustomDatas.CustomDataB & (byte)(1 << 1)))
{
manifold.JacobianFlags |= JacobianFlags.EnableSurfaceVelocity;
}
if (0 != (manifold.BodyCustomDatas.CustomDataA & (byte)(1 << 2)) ||
0 != (manifold.BodyCustomDatas.CustomDataB & (byte)(1 << 2)))
{
manifold.JacobianFlags |= JacobianFlags.EnableMassFactors;
}
if (0 != (manifold.BodyCustomDatas.CustomDataA & (byte)(1 << 3)) ||
0 != (manifold.BodyCustomDatas.CustomDataB & (byte)(1 << 3)))
{
manifold.JacobianFlags |= JacobianFlags.UserFlag1; // No Torque
}
if (0 != (manifold.BodyCustomDatas.CustomDataA & (byte)(1 << 4)) ||
0 != (manifold.BodyCustomDatas.CustomDataB & (byte)(1 << 4)))
{
manifold.JacobianFlags |= JacobianFlags.EnableMaxImpulse; // No Torque
}
if (0 != (manifold.BodyCustomDatas.CustomDataA & (byte)(1 << 5)) ||
0 != (manifold.BodyCustomDatas.CustomDataB & (byte)(1 << 5)))
{
manifold.JacobianFlags |= JacobianFlags.Disabled;
}
iterator.UpdatePreviousContactHeader(manifold);
// Just read contacts
for (int i = 0; i < manifold.NumContacts; i++)
{
iterator.GetNextContact();
}
}
return(inDeps);
};
SimulationCallbacks.Callback jacobianModificationCallback = (ref ISimulation simulation, JobHandle inDeps) =>
{
inDeps.Complete(); // shouldn't be needed (jobify the below)
JacobianIterator iterator = simulation.Jacobians.Iterator;
while (iterator.HasJacobiansLeft())
{
// JacobianModifierFlags format for this example
// UserFlag0 - soft contact
// UserFlag1 - no torque
// Jacobian header
ref JacobianHeader jacHeader = ref iterator.ReadJacobianHeader();
// Triggers can only be disabled, other modifiers have no effect
if (jacHeader.Type == JacobianType.Contact)
{
// Contact jacobian modification
ref ContactJacobian contactJacobian = ref jacHeader.AccessBaseJacobian <ContactJacobian>();
{
// Check if NoTorque modifier
if ((jacHeader.Flags & JacobianFlags.UserFlag1) != 0)
{
// Disable all friction angular effects
contactJacobian.Friction0.AngularA = 0.0f;
contactJacobian.Friction1.AngularA = 0.0f;
contactJacobian.AngularFriction.AngularA = 0.0f;
contactJacobian.Friction0.AngularB = 0.0f;
contactJacobian.Friction1.AngularB = 0.0f;
contactJacobian.AngularFriction.AngularB = 0.0f;
}
// Check if SurfaceVelocity present
if (jacHeader.HasSurfaceVelocity)
{
// Since surface normal can change, make sure angular velocity is always relative to it, not independent
float3 angVel = contactJacobian.BaseJacobian.Normal * (new float3(0.0f, 1.0f, 0.0f));
float3 linVel = float3.zero;
Math.CalculatePerpendicularNormalized(contactJacobian.BaseJacobian.Normal, out float3 dir0, out float3 dir1);
float linVel0 = math.dot(linVel, dir0);
float linVel1 = math.dot(linVel, dir1);
float angVelProj = math.dot(angVel, contactJacobian.BaseJacobian.Normal);
jacHeader.SurfaceVelocity = new SurfaceVelocity {
ExtraFrictionDv = new float3(linVel0, linVel1, angVelProj)
};
}
public void Execute(ref ModifiableJacobianHeader jacHeader, ref ModifiableContactJacobian contactJacobian)
{
Entity entityA = jacHeader.Entities.EntityA;
Entity entityB = jacHeader.Entities.EntityB;
ModifyContactJacobians.ModificationType typeA = ModifyContactJacobians.ModificationType.None;
if (modificationData.Exists(entityA))
{
typeA = modificationData[entityA].type;
}
ModifyContactJacobians.ModificationType typeB = ModifyContactJacobians.ModificationType.None;
if (modificationData.Exists(entityB))
{
typeB = modificationData[entityB].type;
}
{
// Check for jacobians we want to ignore:
if (typeA == ModifyContactJacobians.ModificationType.DisabledContact || typeB == ModifyContactJacobians.ModificationType.DisabledContact)
{
jacHeader.Flags = jacHeader.Flags | JacobianFlags.Disabled;
}
// Check if NoTorque modifier
if (typeA == ModifyContactJacobians.ModificationType.NoAngularEffects || typeB == ModifyContactJacobians.ModificationType.NoAngularEffects)
{
// Disable all friction angular effects
var friction0 = contactJacobian.Friction0;
friction0.AngularA = 0.0f;
friction0.AngularB = 0.0f;
contactJacobian.Friction0 = friction0;
var friction1 = contactJacobian.Friction1;
friction1.AngularA = 0.0f;
friction1.AngularB = 0.0f;
contactJacobian.Friction1 = friction1;
var angularFriction = contactJacobian.AngularFriction;
angularFriction.AngularA = 0.0f;
angularFriction.AngularB = 0.0f;
contactJacobian.AngularFriction = angularFriction;
}
// Check if SurfaceVelocity present
if (jacHeader.HasSurfaceVelocity &&
(typeA == ModifyContactJacobians.ModificationType.SurfaceVelocity || typeB == ModifyContactJacobians.ModificationType.SurfaceVelocity))
{
// Since surface normal can change, make sure angular velocity is always relative to it, not independent
float3 angVel = contactJacobian.Normal * (new float3(0.0f, 1.0f, 0.0f));
float3 linVel = float3.zero;
Math.CalculatePerpendicularNormalized(contactJacobian.Normal, out float3 dir0, out float3 dir1);
float linVel0 = math.dot(linVel, dir0);
float linVel1 = math.dot(linVel, dir1);
float angVelProj = math.dot(angVel, contactJacobian.Normal);
//jacHeader.SurfaceVelocity = new SurfaceVelocity { ExtraFrictionDv = new float3(linVel0, linVel1, angVelProj) };
}
/*
* // Check if MaxImpulse present
* if (jacHeader.HasMaxImpulse &&
* (typeA == ModifyContactJacobians.ModificationType.ClippedImpulse || typeB == ModifyContactJacobians.ModificationType.ClippedImpulse))
* {
* // Max impulse in Ns (Newton-second)
* jacHeader.MaxImpulse = 20.0f;
* }
*/
// Check if MassFactors present
if (jacHeader.HasMassFactors &&
(typeA == ModifyContactJacobians.ModificationType.InfiniteInertia || typeB == ModifyContactJacobians.ModificationType.InfiniteInertia))
{
// Give both bodies infinite inertia
jacHeader.MassFactors = new MassFactors
{
InvInertiaAndMassFactorA = new float4(0.0f, 0.0f, 0.0f, 1.0f),
InvInertiaAndMassFactorB = new float4(0.0f, 0.0f, 0.0f, 1.0f)
};
}
}
// Angular jacobian modifications
for (int i = 0; i < contactJacobian.NumContacts; i++)
{
ContactJacAngAndVelToReachCp jacobianAngular = jacHeader.GetAngularJacobian(i);
// Check if NoTorque modifier
if (typeA == ModifyContactJacobians.ModificationType.NoAngularEffects || typeB == ModifyContactJacobians.ModificationType.NoAngularEffects)
{
// Disable all angular effects
jacobianAngular.Jac.AngularA = 0.0f;
jacobianAngular.Jac.AngularB = 0.0f;
}
// Check if SoftContact modifier
if (typeA == ModifyContactJacobians.ModificationType.SoftContact || typeB == ModifyContactJacobians.ModificationType.SoftContact)
{
jacobianAngular.Jac.EffectiveMass *= 0.1f;
if (jacobianAngular.VelToReachCp > 0.0f)
{
jacobianAngular.VelToReachCp *= 0.5f;
}
}
jacHeader.SetAngularJacobian(i, jacobianAngular);
}
}