/// <summary>
/// This method send a request for reading a symbol.
/// </summary>
/// <param name="a_address">The symbol number to read [0..0xFFFF-1].</param>
/// <returns></returns>
public bool setSymbolRequest(uint a_symbolNumber)
{
LogDataString("setSymbolRequest");
KWPReply reply = new KWPReply();
KWPResult result = KWPResult.Timeout;
byte[] symbolNumber = new byte[5];
//First two bytes should be zero
symbolNumber[0] = 0;
symbolNumber[1] = 0;
symbolNumber[2] = 0x80;
//set symbol number (byte 2 to 3);
symbolNumber[3] = (byte)(a_symbolNumber >> 8);
symbolNumber[4] = (byte)(a_symbolNumber);
//<GS-11022010>
// check result .. it should be 2 bytes long
int _retryCount = 0;
while (_retryCount++ < 3 && result != KWPResult.OK)
{
//result = sendRequest(new KWPRequest(0x2C, 0xF0, 0x03, symbolNumber), out reply);
result = sendRequest(new KWPRequest(0x2C, 0xF0, 0x03, symbolNumber), out reply/*, 2*/);
if (reply.getLength() != 2)
{
result = KWPResult.Timeout;
LogDataString("Got wrong response on sendRequest in setSymbolRequest, len = " + reply.getLength().ToString("D2"));
Console.WriteLine("Got wrong response on sendRequest in setSymbolRequest, len = " + reply.getLength().ToString("D2"));
}
}
if (result == KWPResult.OK)
{
return true;
}
else
{
LogDataString("setSymbolRequest timed out");
Console.WriteLine("setSymbolRequest timed out");
return false;
}
}
/// <summary>
/// This method sets the E85 level.
/// </summary>
/// <param name="a_level">The E85 level.</param>
/// <returns>KWPResult</returns>
public KWPResult setE85Level(int a_level)
{
KWPReply reply = new KWPReply();
KWPResult result;
int sendlevel = a_level * 10;
byte[] level = new byte[2];
level[0] = (byte)(sendlevel >> 8);
level[1] = (byte)sendlevel;
result = sendRequest(new KWPRequest(0x3B, 0xA7, level), out reply);
if(reply.getMode() == 0x7B && reply.getPid() == 0xA7)
{
return KWPResult.OK;
}
else if(reply.getMode() == 0x7F && reply.getPid() == 0x3B && reply.getLength() == 3)
{
Console.WriteLine(TranslateErrorCode(reply.getData()[0]));
}
return KWPResult.NOK;
}
/// <summary>
/// This method sends a KWPRequest and returns a KWPReply.
/// </summary>
/// <param name="a_request">The request.</param>
/// <param name="a_reply">The reply.</param>
/// <returns>KWPResult</returns>
private KWPResult sendRequest(KWPRequest a_request, out KWPReply a_reply, int expectedLength)
{
int _maxSendRetries = 3;
KWPResult _kwpResult = KWPResult.Timeout;
LogDataString("sendRequest");
KWPReply reply = new KWPReply();
RequestResult result;
a_reply = new KWPReply();
//<GS-11012010> was allemaal 1000
int keepAliveTimeout = 1000;
//Console.WriteLine("Checking KWP device open");
if (!m_kwpDevice.isOpen())
return KWPResult.DeviceNotConnected;
// reset the timer for keep alive (set to 1 seconds now)
if (stateTimer == null)
stateTimer = new System.Threading.Timer(sendKeepAlive, new Object(), keepAliveTimeout, keepAliveTimeout);
stateTimer.Change(keepAliveTimeout, keepAliveTimeout);
m_requestMutex.WaitOne();
int _retryCount = 0;
result = RequestResult.Unknown; // <GS-11022010>
while (_retryCount < _maxSendRetries && result != RequestResult.NoError)
{
LogDataString(a_request.ToString());
result = m_kwpDevice.sendRequest(a_request, out reply);
if ((int)reply.getLength() != expectedLength)
{
result = RequestResult.InvalidLength;
}
if (result == RequestResult.NoError)
{
a_reply = reply;
LogDataString(reply.ToString());
LogDataString(""); // empty line
m_requestMutex.ReleaseMutex();
//return KWPResult.OK;
_kwpResult = KWPResult.OK;
}
else
{
LogDataString("Timeout in KWPHandler::sendRequest");
m_requestMutex.ReleaseMutex();
//return KWPResult.Timeout;
_kwpResult = KWPResult.Timeout;
}
}
return _kwpResult;
}
/// <summary>
/// This method requests the E85 level.
/// </summary>
/// <param name="r_level">The requested E85 level.</param>
/// <returns>KWPResult</returns>
public KWPResult getE85Level(out float r_level)
{
KWPReply reply = new KWPReply();
KWPResult result;
float level;
result = sendRequest(new KWPRequest(0x21, 0xA7), out reply); // Request Diagnostic Data Mode $21 - Offset (1 byte)
if (reply.getMode() == 0x61 && reply.getPid() == 0xA7 && reply.getLength() == 4)
{
level = (reply.getData()[0] << 8) | reply.getData()[1];
r_level = level / 10;
return KWPResult.OK;
}
else if (reply.getMode() == 0x7F && reply.getPid() == 0x21 && reply.getLength() == 3)
{
Console.WriteLine(TranslateErrorCode(reply.getData()[0]));
}
r_level = 0;
return KWPResult.NOK;
}
/// <summary>
/// This method sends a KWPRequest and returns a KWPReply.
/// </summary>
/// <param name="a_request">The request.</param>
/// <param name="a_reply">The reply.</param>
/// <returns>KWPResult</returns>
private KWPResult sendRequest(KWPRequest a_request, out KWPReply a_reply, int expectedLength)
{
int _maxSendRetries = 3;
KWPResult _kwpResult = KWPResult.Timeout;
logger.Trace("sendRequest");
KWPReply reply = new KWPReply();
RequestResult result;
a_reply = new KWPReply();
//Console.WriteLine("Checking KWP device open");
if (!m_kwpDevice.isOpen())
return KWPResult.DeviceNotConnected;
// reset the timer for keep alive (set to 1 seconds now)
if (stateTimer != null)
{
stateTimer.Change(keepAliveTimeout, keepAliveTimeout);
}
m_requestMutex.WaitOne();
int _retryCount = 0;
result = RequestResult.Unknown; // <GS-11022010>
while (_retryCount < _maxSendRetries && result != RequestResult.NoError)
{
logger.Trace(a_request.ToString());
result = m_kwpDevice.sendRequest(a_request, out reply);
if ((int)reply.getLength() != expectedLength)
{
result = RequestResult.InvalidLength;
}
if (result == RequestResult.NoError)
{
a_reply = reply;
logger.Trace(reply.ToString());
logger.Trace(""); // empty line
m_requestMutex.ReleaseMutex();
//return KWPResult.OK;
_kwpResult = KWPResult.OK;
}
else
{
logger.Trace("Error in KWPHandler::sendRequest" + result.ToString() + " " + reply.ToString());
m_requestMutex.ReleaseMutex();
//return KWPResult.Timeout;
_kwpResult = KWPResult.Timeout;
}
}
return _kwpResult;
}