/// <summary>
/// Sample code to hande a couple of different cards based on the identification process
/// </summary>
/// <returns>None</returns>
private async Task HandleCard(SmartCard card)
{
try
{
// Clear the messages
MainPage.Current.NotifyUser(String.Empty, NotifyType.StatusMessage, true);
// Connect to the card
using (SmartCardConnection connection = await card.ConnectAsync())
{
// Try to identify what type of card it was
IccDetection cardIdentification = new IccDetection(card, connection);
await cardIdentification.DetectCardTypeAync();
LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
LogMessage("ATR: " + BitConverter.ToString(cardIdentification.Atr));
if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
(cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
{
// Handle MIFARE Ultralight
MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);
// Each read should get us 16 bytes/4 blocks, so doing
// 4 reads will get us all 64 bytes/16 blocks on the card
for (byte i = 0; i < 4; i++)
{
byte[] response = await mifareULAccess.ReadAsync((byte)(4 * i));
LogMessage("Block " + (4 * i).ToString() + " to Block " + (4 * i + 3).ToString() + " " + BitConverter.ToString(response));
}
byte[] responseUid = await mifareULAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(responseUid));
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.MifareDesfire)
{
// Handle MIFARE DESfire
Desfire.AccessHandler desfireAccess = new Desfire.AccessHandler(connection);
Desfire.CardDetails desfire = await desfireAccess.ReadCardDetailsAsync();
LogMessage("DesFire Card Details: " + Environment.NewLine + desfire.ToString());
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
&& cardIdentification.PcscCardName == Pcsc.CardName.FeliCa)
{
// Handle Felica
LogMessage("Felica card detected");
var felicaAccess = new Felica.AccessHandler(connection);
var uid = await felicaAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(uid));
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
&& (cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard1K || cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard4K))
{
// Handle MIFARE Standard/Classic
LogMessage("MIFARE Standard/Classic card detected");
var mfStdAccess = new MifareStandard.AccessHandler(connection);
var uid = await mfStdAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(uid));
ushort maxAddress = 0;
switch (cardIdentification.PcscCardName)
{
case Pcsc.CardName.MifareStandard1K:
maxAddress = 0x3f;
break;
case Pcsc.CardName.MifareStandard4K:
maxAddress = 0xff;
break;
}
await mfStdAccess.LoadKeyAsync(MifareStandard.DefaultKeys.FactoryDefault);
for (ushort address = 0; address <= maxAddress; address++)
{
var response = await mfStdAccess.ReadAsync(address, Pcsc.GeneralAuthenticate.GeneralAuthenticateKeyType.MifareKeyA);
LogMessage("Block " + address.ToString() + " " + BitConverter.ToString(response));
}
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
&& (cardIdentification.PcscCardName == Pcsc.CardName.ICODE1 ||
cardIdentification.PcscCardName == Pcsc.CardName.ICODESLI ||
cardIdentification.PcscCardName == Pcsc.CardName.iCodeSL2))
{
// Handle ISO15693
LogMessage("ISO15693 card detected");
var iso15693Access = new Iso15693.AccessHandler(connection);
var uid = await iso15693Access.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(uid));
}
else
{
// Unknown card type
// Note that when using the XDE emulator the card's ATR and type is not passed through, so we'll
// end up here even for known card types if using the XDE emulator
// Some cards might still let us query their UID with the PC/SC command, so let's try:
var apduRes = await connection.TransceiveAsync(new Pcsc.GetUid());
if (!apduRes.Succeeded)
{
LogMessage("Failure getting UID of card, " + apduRes.ToString());
}
else
{
LogMessage("UID: " + BitConverter.ToString(apduRes.ResponseData));
}
}
}
}
catch(Exception ex)
{
LogMessage("Exception handling card: " + ex.ToString(), NotifyType.ErrorMessage);
}
}
private async Task HandleCard(SmartCard card)
{
try
{
connection = await card.ConnectAsync();
IccDetection cardIdentification = new IccDetection(card, connection);
await cardIdentification.DetectCardTypeAync();
LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
LogMessage("ATR: " + BitConverter.ToString(cardIdentification.Atr));
if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
(cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
{
MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);
byte[] responseUid = await mifareULAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(responseUid));
if (!BinaryDump && !ByteArrayEqual(responseUid, AmiiboUID)) //I used this because for some reasons responseUid == AmiiboUID was always false
{
MessageDialog dialog = new MessageDialog("The dump UID and the amiibo UID don't match");
LogMessage("Amiibo UID: " + BitConverter.ToString(responseUid) + " != Dump UID: " + BitConverter.ToString(AmiiboUID));
await dialog.ShowAsync();
return;
}
LogMessage("Using key: " + BitConverter.ToString(AmiiboPass));
byte[] Authresponse = await mifareULAccess.TransparentExchangeAsync(new byte[] { 0x1B, AmiiboPass[0], AmiiboPass[1], AmiiboPass[2], AmiiboPass[3] }); //PWD_AUTH
LogMessage("Auth sent !");
LogMessage("Auth Response length: " + Authresponse.Length.ToString());
if (Authresponse.Length == 0)
{
LogMessage("No response from Amiibo, can't restore dump !");
MessageDialog dlg = new MessageDialog("No response from Amiibo, wrong password ?");
await dlg.ShowAsync();
return;
}
LogMessage("Auth response: " + BitConverter.ToString(Authresponse));
//Using page layout from: https://www.3dbrew.org/wiki/Amiibo#Page_layout
#region WritePages
mifareULAccess.WriteAsync(0x4, getNBytes(AmiiboDump,0x10));
LogMessage("Page 0x4 wrote !");
mifareULAccess.WriteAsync(0x5, getNBytes(AmiiboDump, 0x14));
LogMessage("Page 0x5 wrote !");
mifareULAccess.WriteAsync(0x6, getNBytes(AmiiboDump, 0x18));
LogMessage("Page 0x6 wrote !");
mifareULAccess.WriteAsync(0x7, getNBytes(AmiiboDump, 0x1C));
LogMessage("Page 0x7 wrote !");
mifareULAccess.WriteAsync(0x8, getNBytes(AmiiboDump, 0x20));
LogMessage("Page 0x8 wrote !");
mifareULAccess.WriteAsync(0x9, getNBytes(AmiiboDump, 0x24));
LogMessage("Page 0x9 wrote !");
mifareULAccess.WriteAsync(0xA, getNBytes(AmiiboDump, 0x28));
LogMessage("Page 0xA wrote !");
mifareULAccess.WriteAsync(0xB, getNBytes(AmiiboDump, 0x2C));
LogMessage("Page 0xB wrote !");
mifareULAccess.WriteAsync(0xC, getNBytes(AmiiboDump, 0x30));
LogMessage("Page 0xC wrote !");
mifareULAccess.WriteAsync(0x20, getNBytes(AmiiboDump, 0x80));
LogMessage("Page 0x20 wrote !");
mifareULAccess.WriteAsync(0x21, getNBytes(AmiiboDump, 0x84));
LogMessage("Page 0x21 wrote !");
mifareULAccess.WriteAsync(0x22, getNBytes(AmiiboDump, 0x88));
LogMessage("Page 0x22 wrote !");
mifareULAccess.WriteAsync(0x23, getNBytes(AmiiboDump, 0x8C));
LogMessage("Page 0x23 wrote !");
mifareULAccess.WriteAsync(0x24, getNBytes(AmiiboDump, 0x90));
LogMessage("Page 0x24 wrote !");
mifareULAccess.WriteAsync(0x25, getNBytes(AmiiboDump, 0x94));
LogMessage("Page 0x25 wrote !");
mifareULAccess.WriteAsync(0x26, getNBytes(AmiiboDump, 0x98));
LogMessage("Page 0x26 wrote !");
mifareULAccess.WriteAsync(0x27, getNBytes(AmiiboDump, 0x9c));
LogMessage("Page 0x27 wrote !");//Until here i manually wrote the write addreses to test if the writing works, but i'm too lazy to replace those arleady working functions with a cycle
for (int i = 0; i < 0x5A; i++) mifareULAccess.WriteAsync((byte)(0x28/*Page*/ + i), getNBytes(AmiiboDump, 0xA0 /*ADDR of page 0x28*/ + (i*4)));
LogMessage("Page 0x28 to 0x81 wrote !");
#endregion
LogMessage("Dump restored :) !");
MessageDialog msg = new MessageDialog("Dump restored !");
await msg.ShowAsync();
}
else
{
LogMessage("This tag is not an Amiibo !");
MessageDialog msg = new MessageDialog("This tag is not an Amiibo !");
await msg.ShowAsync();
var apduRes = await connection.TransceiveAsync(new Pcsc.GetUid());
if (!apduRes.Succeeded)
{
LogMessage("Failure getting UID of card, " + apduRes.ToString());
}
else
{
LogMessage("UID: " + BitConverter.ToString(apduRes.ResponseData));
}
}
connection.Dispose();
}
catch (Exception ex)
{
connection.Dispose();
LogMessage("Exception handling card: " + ex.ToString());
MessageDialog msg = new MessageDialog("Exception handling card: " + ex.ToString());
await msg.ShowAsync();
}
}
/// <summary>
/// Sample code to hande a couple of different cards based on the identification process
/// </summary>
/// <returns>None</returns>
private async Task HandleCard(SmartCard card)
{
try
{
// Clear the messages
MainPage.Current.NotifyUser(String.Empty, NotifyType.StatusMessage, true);
// Connect to the card
var connection = await card.ConnectAsync();
// Try to identify what type of card it was
IccDetection cardIdentification = new IccDetection(card, connection);
await cardIdentification.DetectCardTypeAync();
LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
(cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
{
// Handle MIFARE Ultralight
MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);
// Each read should get us 16 bytes/4 blocks, so doing
// 4 reads will get us all 64 bytes/16 blocks on the card
for (byte i = 0; i < 4; i++)
{
byte[] response = await mifareULAccess.ReadAsync((byte)(4 * i));
LogMessage("Block " + (4 * i).ToString() + " to Block " + (4 * i + 3).ToString() + " " + BitConverter.ToString(response));
}
byte[] responseUid = await mifareULAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(responseUid));
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.MifareDesfire)
{
// Handle MIFARE DESfire
Desfire.AccessHandler desfireAccess = new Desfire.AccessHandler(connection);
Desfire.CardDetails desfire = await desfireAccess.ReadCardDetailsAsync();
LogMessage("DesFire Card Details: " + Environment.NewLine + desfire.ToString());
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
&& cardIdentification.PcscCardName == Pcsc.CardName.FeliCa)
{
// Handle Felica
LogMessage("Felica card detected");
var felicaAccess = new Felica.AccessHandler(connection);
var uid = await felicaAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(uid));
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
&& (cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard1K || cardIdentification.PcscCardName == Pcsc.CardName.MifareStandard4K))
{
// Handle MIFARE Standard/Classic
LogMessage("MIFARE Standard/Classic card detected");
var mfStdAccess = new MifareStandard.AccessHandler(connection);
var uid = await mfStdAccess.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(uid));
ushort maxAddress = 0;
switch (cardIdentification.PcscCardName)
{
case Pcsc.CardName.MifareStandard1K:
maxAddress = 0x3f;
break;
case Pcsc.CardName.MifareStandard4K:
maxAddress = 0xff;
break;
}
await mfStdAccess.LoadKeyAsync(MifareStandard.DefaultKeys.FactoryDefault);
for (ushort address = 0; address <= maxAddress; address++)
{
var response = await mfStdAccess.ReadAsync(address, Pcsc.GeneralAuthenticate.GeneralAuthenticateKeyType.MifareKeyA);
LogMessage("Block " + address.ToString() + " " + BitConverter.ToString(response));
}
}
else if (cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass
&& (cardIdentification.PcscCardName == Pcsc.CardName.ICODE1 ||
cardIdentification.PcscCardName == Pcsc.CardName.ICODESLI ||
cardIdentification.PcscCardName == Pcsc.CardName.iCodeSL2))
{
// Handle ISO15693
LogMessage("ISO15693 card detected");
var iso15693Access = new Iso15693.AccessHandler(connection);
var uid = await iso15693Access.GetUidAsync();
LogMessage("UID: " + BitConverter.ToString(uid));
}
connection.Dispose();
}
catch(Exception ex)
{
LogMessage("Exception handling card: " + ex.ToString(), NotifyType.ErrorMessage);
}
}
private async Task HandleCard(SmartCard card)
{
try
{
connection = await card.ConnectAsync();
IccDetection cardIdentification = new IccDetection(card, connection);
await cardIdentification.DetectCardTypeAync();
LogMessage("Connected to card\r\nPC/SC device class: " + cardIdentification.PcscDeviceClass.ToString());
LogMessage("Card name: " + cardIdentification.PcscCardName.ToString());
LogMessage("ATR: " + BitConverter.ToString(cardIdentification.Atr));
if ((cardIdentification.PcscDeviceClass == Pcsc.Common.DeviceClass.StorageClass) &&
(cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightC
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralight
|| cardIdentification.PcscCardName == Pcsc.CardName.MifareUltralightEV1))
{
MifareUltralight.AccessHandler mifareULAccess = new MifareUltralight.AccessHandler(connection);
List<byte> dumpTmp = new List<byte>();
byte[] responseUid = await mifareULAccess.GetUidAsync();
dumpTmp.AddRange(new byte[] { 0x41, 0x6D, 0x69, 0x69, 0x67, 0x6F, 0x44, 0x75, 0x6D, 0x70, 0x00, 0x00, 0x00, 0x00 }); //MAGIC
LogMessage("UID: " + BitConverter.ToString(responseUid));
dumpTmp.AddRange(responseUid);
dumpTmp.AddRange(new byte[4]);
for (byte i = 0; i < 33; i++)
{
byte[] response = await mifareULAccess.ReadAsync((byte)(4 * i));
dumpTmp.AddRange(response);
LogMessage("Block " + (4 * i).ToString() + " to Block " + (4 * i + 3).ToString() + " " + BitConverter.ToString(response));
}
LogMessage("Dump ended :) !");
dumpTmp.AddRange(new byte[4] { 0x5F, 0x00, 0x00, 0x00 });
Dump = dumpTmp.ToArray();
MessageDialog msg = new MessageDialog("Dump completed !");
await msg.ShowAsync();
}
else
{
LogMessage("This tag is not an Amiibo and can't be dumped!");
MessageDialog msg = new MessageDialog("This tag is not an Amiibo and can't be dumped !");
await msg.ShowAsync();
var apduRes = await connection.TransceiveAsync(new Pcsc.GetUid());
if (!apduRes.Succeeded)
{
LogMessage("Failure getting UID of card, " + apduRes.ToString());
}
else
{
LogMessage("UID: " + BitConverter.ToString(apduRes.ResponseData));
}
}
connection.Dispose();
}
catch (Exception ex)
{
connection.Dispose();
LogMessage("Exception handling card: " + ex.ToString());
MessageDialog msg = new MessageDialog("Exception handling card: " + ex.ToString());
await msg.ShowAsync();
}
}