public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Rectangle rect = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, rect);
if (((base.parentView.RootDesigner != null) && (base.parentView.RootDesigner.Bounds.Width >= 0)) && (base.parentView.RootDesigner.Bounds.Height >= 0))
{
GraphicsContainer container = graphics.BeginContainer();
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
Point[] pts = new Point[] { viewPortData.LogicalViewPort.Location };
matrix.TransformPoints(pts);
matrix.Translate((float)(-pts[0].X + viewPortData.ShadowDepth.Width), (float)(-pts[0].Y + viewPortData.ShadowDepth.Height), MatrixOrder.Append);
graphics.Transform = matrix;
using (Region region = new Region(ActivityDesignerPaint.GetDesignerPath(base.parentView.RootDesigner, false)))
{
Region clip = graphics.Clip;
graphics.Clip = region;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
graphics.FillRectangle(Brushes.White, base.parentView.RootDesigner.Bounds);
if (ambientTheme.WorkflowWatermarkImage != null)
{
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, base.parentView.RootDesigner.Bounds, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, 0.25f, false);
}
graphics.Clip = clip;
}
graphics.EndContainer(container);
}
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Rectangle rect = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, rect);
if (((base.parentView.RootDesigner != null) && (base.parentView.RootDesigner.Bounds.Width >= 0)) && (base.parentView.RootDesigner.Bounds.Height >= 0))
{
GraphicsContainer container = graphics.BeginContainer();
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
Point[] pts = new Point[] { viewPortData.LogicalViewPort.Location };
matrix.TransformPoints(pts);
matrix.Translate((float) (-pts[0].X + viewPortData.ShadowDepth.Width), (float) (-pts[0].Y + viewPortData.ShadowDepth.Height), MatrixOrder.Append);
graphics.Transform = matrix;
using (Region region = new Region(ActivityDesignerPaint.GetDesignerPath(base.parentView.RootDesigner, false)))
{
Region clip = graphics.Clip;
graphics.Clip = region;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
graphics.FillRectangle(Brushes.White, base.parentView.RootDesigner.Bounds);
if (ambientTheme.WorkflowWatermarkImage != null)
{
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, base.parentView.RootDesigner.Bounds, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, 0.25f, false);
}
graphics.Clip = clip;
}
graphics.EndContainer(container);
}
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Rectangle destination = new Rectangle(Point.Empty, memoryBitmap.Size);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, destination, destination, DesignerContentAlignment.Fill, 1f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
//
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
//Fill the background using the workspace color so that we communicate the paging concept
Rectangle workspaceRectangle = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, workspaceRectangle);
if (this.parentView.RootDesigner != null &&
this.parentView.RootDesigner.Bounds.Width >= 0 && this.parentView.RootDesigner.Bounds.Height >= 0)
{
GraphicsContainer graphicsState = graphics.BeginContainer();
//Create the scaling matrix
Matrix transformationMatrix = new Matrix();
transformationMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
//When we draw on the viewport we draw in scaled and translated.
//So that we minimize the calls to DrawImage
//Make sure that we scale down the logical view port origin in order to take care of scaling factor
//Before we select the transform factor we make sure that logicalviewport origin is scaled down
Point[] logicalViewPortOrigin = new Point[] { viewPortData.LogicalViewPort.Location };
transformationMatrix.TransformPoints(logicalViewPortOrigin);
//For performance improvement and to eliminate one extra DrawImage...we draw the designers on the viewport
//bitmap with visual depth consideration
transformationMatrix.Translate(-logicalViewPortOrigin[0].X + viewPortData.ShadowDepth.Width, -logicalViewPortOrigin[0].Y + viewPortData.ShadowDepth.Height, MatrixOrder.Append);
//Select the transform into viewport graphics.
//Viewport bitmap has the scaled and translated designers which we then map to
//the actual graphics based on page layout
graphics.Transform = transformationMatrix;
using (Region clipRegion = new Region(ActivityDesignerPaint.GetDesignerPath(this.parentView.RootDesigner, false)))
{
Region oldRegion = graphics.Clip;
graphics.Clip = clipRegion;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
graphics.FillRectangle(Brushes.White, this.parentView.RootDesigner.Bounds);
if (ambientTheme.WorkflowWatermarkImage != null)
{
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, this.parentView.RootDesigner.Bounds, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, AmbientTheme.WatermarkTransparency, false);
}
graphics.Clip = oldRegion;
}
graphics.EndContainer(graphicsState);
}
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Rectangle destination = new Rectangle(Point.Empty, memoryBitmap.Size);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, destination, destination, DesignerContentAlignment.Fill, 1f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
Rectangle bitmapArea = new Rectangle(Point.Empty, memoryBitmap.Size);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, bitmapArea, bitmapArea, DesignerContentAlignment.Fill, 1.0f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
base.OnPaint(e, viewPortData);
Graphics graphics = e.Graphics;
if (this.parentView.RootDesigner != null &&
this.parentView.RootDesigner.Bounds.Width >= 0 && this.parentView.RootDesigner.Bounds.Height >= 0)
{
GraphicsContainer graphicsState = graphics.BeginContainer();
//Create the scaling matrix
Matrix transformationMatrix = new Matrix();
transformationMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
//When we draw on the viewport we draw in scaled and translated.
//So that we minimize the calls to DrawImage
//Make sure that we scale down the logical view port origin in order to take care of scaling factor
//Before we select the transform factor we make sure that logicalviewport origin is scaled down
Point[] logicalViewPortOrigin = new Point[] { viewPortData.LogicalViewPort.Location };
transformationMatrix.TransformPoints(logicalViewPortOrigin);
//For performance improvement and to eliminate one extra DrawImage...we draw the designers on the viewport
//bitmap with visual depth consideration
transformationMatrix.Translate(-logicalViewPortOrigin[0].X + viewPortData.ShadowDepth.Width, -logicalViewPortOrigin[0].Y + viewPortData.ShadowDepth.Height, MatrixOrder.Append);
//Select the transform into viewport graphics.
//Viewport bitmap has the scaled and translated designers which we then map to
//the actual graphics based on page layout
graphics.Transform = transformationMatrix;
Rectangle rootBounds = this.parentView.RootDesigner.Bounds;
graphics.ExcludeClip(rootBounds);
rootBounds.Inflate(ActivityRootLayout.Separator.Width / 2, ActivityRootLayout.Separator.Height / 2);
ActivityDesignerPaint.DrawDropShadow(graphics, rootBounds, AmbientTheme.WorkflowBorderPen.Color, AmbientTheme.DropShadowWidth, LightSourcePosition.Left | LightSourcePosition.Top, 0.2f, false);
graphics.FillRectangle(WorkflowTheme.CurrentTheme.AmbientTheme.BackgroundBrush, rootBounds);
graphics.DrawRectangle(AmbientTheme.WorkflowBorderPen, rootBounds);
graphics.EndContainer(graphicsState);
}
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
graphics.FillRectangle(Brushes.White, new Rectangle(Point.Empty, memoryBitmap.Size));
if (ambientTheme.WorkflowWatermarkImage != null)
{
GraphicsContainer container = graphics.BeginContainer();
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
matrix.Invert();
Point[] pts = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
matrix.TransformPoints(pts);
Rectangle rect = new Rectangle(pts[0], new Size(pts[1]));
matrix = new Matrix();
matrix.Scale((viewPortData.Scaling.Width / ((float)base.parentView.Zoom)) * 100f, (viewPortData.Scaling.Height / ((float)base.parentView.Zoom)) * 100f);
Matrix matrix2 = new Matrix();
matrix2.Scale(((float)base.parentView.Zoom) / 100f, ((float)base.parentView.Zoom) / 100f);
graphics.Transform = matrix2;
foreach (PageLayoutData data in this.pageLayoutInfo)
{
if (data.PageBounds.IntersectsWith(rect))
{
Rectangle empty = Rectangle.Empty;
empty.X = data.LogicalPageBounds.X - viewPortData.LogicalViewPort.X;
empty.Y = data.LogicalPageBounds.Y - viewPortData.LogicalViewPort.Y;
empty.Width = data.LogicalPageBounds.Width;
empty.Height = data.LogicalPageBounds.Height;
pts = new Point[] { empty.Location, new Point(empty.Size) };
matrix.TransformPoints(pts);
empty.Location = pts[0];
empty.Size = new Size(pts[1]);
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, empty, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, 0.25f, false);
}
}
graphics.EndContainer(container);
}
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
base.OnPaint(e, viewPortData);
Graphics graphics = e.Graphics;
if (((base.parentView.RootDesigner != null) && (base.parentView.RootDesigner.Bounds.Width >= 0)) && (base.parentView.RootDesigner.Bounds.Height >= 0))
{
GraphicsContainer container = graphics.BeginContainer();
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
Point[] pts = new Point[] { viewPortData.LogicalViewPort.Location };
matrix.TransformPoints(pts);
matrix.Translate((float) (-pts[0].X + viewPortData.ShadowDepth.Width), (float) (-pts[0].Y + viewPortData.ShadowDepth.Height), MatrixOrder.Append);
graphics.Transform = matrix;
Rectangle bounds = base.parentView.RootDesigner.Bounds;
graphics.ExcludeClip(bounds);
bounds.Inflate(DefaultWorkflowLayout.Separator.Width / 2, DefaultWorkflowLayout.Separator.Height / 2);
ActivityDesignerPaint.DrawDropShadow(graphics, bounds, AmbientTheme.WorkflowBorderPen.Color, 4, LightSourcePosition.Top | LightSourcePosition.Left, 0.2f, false);
graphics.FillRectangle(WorkflowTheme.CurrentTheme.AmbientTheme.BackgroundBrush, bounds);
graphics.DrawRectangle(AmbientTheme.WorkflowBorderPen, bounds);
graphics.EndContainer(container);
}
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
base.OnPaint(e, viewPortData);
Graphics graphics = e.Graphics;
if (((base.parentView.RootDesigner != null) && (base.parentView.RootDesigner.Bounds.Width >= 0)) && (base.parentView.RootDesigner.Bounds.Height >= 0))
{
GraphicsContainer container = graphics.BeginContainer();
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
Point[] pts = new Point[] { viewPortData.LogicalViewPort.Location };
matrix.TransformPoints(pts);
matrix.Translate((float)(-pts[0].X + viewPortData.ShadowDepth.Width), (float)(-pts[0].Y + viewPortData.ShadowDepth.Height), MatrixOrder.Append);
graphics.Transform = matrix;
Rectangle bounds = base.parentView.RootDesigner.Bounds;
graphics.ExcludeClip(bounds);
bounds.Inflate(DefaultWorkflowLayout.Separator.Width / 2, DefaultWorkflowLayout.Separator.Height / 2);
ActivityDesignerPaint.DrawDropShadow(graphics, bounds, AmbientTheme.WorkflowBorderPen.Color, 4, LightSourcePosition.Top | LightSourcePosition.Left, 0.2f, false);
graphics.FillRectangle(WorkflowTheme.CurrentTheme.AmbientTheme.BackgroundBrush, bounds);
graphics.DrawRectangle(AmbientTheme.WorkflowBorderPen, bounds);
graphics.EndContainer(container);
}
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
GraphicsContainer container = graphics.BeginContainer();
Rectangle rect = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, rect);
using (Font font = new Font(ambientTheme.Font.FontFamily, ambientTheme.Font.Size / this.scaling, ambientTheme.Font.Style))
{
int num = 0;
Matrix matrix = new Matrix();
Matrix matrix2 = new Matrix();
matrix2.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
matrix2.Invert();
Point[] pts = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
matrix2.TransformPoints(pts);
matrix2.Invert();
Rectangle rectangle2 = new Rectangle(pts[0], new Size(pts[1]));
WorkflowPrintDocument.HeaderFooterData headerFooterPrintData = new WorkflowPrintDocument.HeaderFooterData {
HeaderFooterMargins = this.headerFooterMargins,
PrintTime = this.previewTime,
TotalPages = this.pageLayoutInfo.Count,
Scaling = this.scaling,
Font = font
};
WorkflowDesignerLoader service = base.serviceProvider.GetService(typeof(WorkflowDesignerLoader)) as WorkflowDesignerLoader;
headerFooterPrintData.FileName = (service != null) ? service.FileName : string.Empty;
Matrix matrix3 = new Matrix();
matrix3.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
matrix3.Translate((float)-viewPortData.Translation.X, (float)-viewPortData.Translation.Y, MatrixOrder.Append);
foreach (PageLayoutData data2 in this.pageLayoutInfo)
{
num++;
if ((data2.PageBounds.IntersectsWith(rectangle2) && (data2.PageBounds.Width > 0)) && (data2.PageBounds.Height > 0))
{
graphics.Transform = matrix3;
graphics.FillRectangle(Brushes.White, data2.PageBounds);
ActivityDesignerPaint.DrawDropShadow(graphics, data2.PageBounds, Color.Black, 4, LightSourcePosition.Top | LightSourcePosition.Left, 0.2f, false);
Rectangle logicalPageBounds = data2.LogicalPageBounds;
logicalPageBounds.Intersect(viewPortData.LogicalViewPort);
if (!logicalPageBounds.IsEmpty)
{
graphics.Transform = matrix;
Point empty = Point.Empty;
empty.X = data2.ViewablePageBounds.X + Math.Abs((int)(data2.LogicalPageBounds.X - logicalPageBounds.X));
empty.Y = data2.ViewablePageBounds.Y + Math.Abs((int)(data2.LogicalPageBounds.Y - logicalPageBounds.Y));
pts = new Point[] { empty };
matrix2.TransformPoints(pts);
empty = new Point(pts[0].X - viewPortData.Translation.X, pts[0].Y - viewPortData.Translation.Y);
Rectangle source = Rectangle.Empty;
source.X = logicalPageBounds.X - viewPortData.LogicalViewPort.X;
source.Y = logicalPageBounds.Y - viewPortData.LogicalViewPort.Y;
source.Width = logicalPageBounds.Width;
source.Height = logicalPageBounds.Height;
pts = new Point[] { source.Location, new Point(source.Size) };
matrix2.TransformPoints(pts);
source.Location = pts[0];
source.Size = new Size(pts[1]);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, new Rectangle(empty, source.Size), source, DesignerContentAlignment.Fill, 1f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
graphics.Transform = matrix3;
graphics.DrawRectangle(Pens.Black, data2.PageBounds);
graphics.DrawRectangle(ambientTheme.ForegroundPen, (int)(data2.ViewablePageBounds.Left - 3), (int)(data2.ViewablePageBounds.Top - 3), (int)(data2.ViewablePageBounds.Width + 6), (int)(data2.ViewablePageBounds.Height + 6));
headerFooterPrintData.PageBounds = data2.PageBounds;
headerFooterPrintData.PageBoundsWithoutMargin = data2.ViewablePageBounds;
headerFooterPrintData.CurrentPage = num;
if (this.printDocument.PageSetupData.HeaderTemplate.Length > 0)
{
this.printDocument.PrintHeaderFooter(graphics, true, headerFooterPrintData);
}
if (this.printDocument.PageSetupData.FooterTemplate.Length > 0)
{
this.printDocument.PrintHeaderFooter(graphics, false, headerFooterPrintData);
}
}
}
graphics.EndContainer(container);
}
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
GraphicsContainer container = graphics.BeginContainer();
Rectangle rect = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, rect);
using (Font font = new Font(ambientTheme.Font.FontFamily, ambientTheme.Font.Size / this.scaling, ambientTheme.Font.Style))
{
int num = 0;
Matrix matrix = new Matrix();
Matrix matrix2 = new Matrix();
matrix2.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
matrix2.Invert();
Point[] pts = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
matrix2.TransformPoints(pts);
matrix2.Invert();
Rectangle rectangle2 = new Rectangle(pts[0], new Size(pts[1]));
WorkflowPrintDocument.HeaderFooterData headerFooterPrintData = new WorkflowPrintDocument.HeaderFooterData {
HeaderFooterMargins = this.headerFooterMargins,
PrintTime = this.previewTime,
TotalPages = this.pageLayoutInfo.Count,
Scaling = this.scaling,
Font = font
};
WorkflowDesignerLoader service = base.serviceProvider.GetService(typeof(WorkflowDesignerLoader)) as WorkflowDesignerLoader;
headerFooterPrintData.FileName = (service != null) ? service.FileName : string.Empty;
Matrix matrix3 = new Matrix();
matrix3.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
matrix3.Translate((float) -viewPortData.Translation.X, (float) -viewPortData.Translation.Y, MatrixOrder.Append);
foreach (PageLayoutData data2 in this.pageLayoutInfo)
{
num++;
if ((data2.PageBounds.IntersectsWith(rectangle2) && (data2.PageBounds.Width > 0)) && (data2.PageBounds.Height > 0))
{
graphics.Transform = matrix3;
graphics.FillRectangle(Brushes.White, data2.PageBounds);
ActivityDesignerPaint.DrawDropShadow(graphics, data2.PageBounds, Color.Black, 4, LightSourcePosition.Top | LightSourcePosition.Left, 0.2f, false);
Rectangle logicalPageBounds = data2.LogicalPageBounds;
logicalPageBounds.Intersect(viewPortData.LogicalViewPort);
if (!logicalPageBounds.IsEmpty)
{
graphics.Transform = matrix;
Point empty = Point.Empty;
empty.X = data2.ViewablePageBounds.X + Math.Abs((int) (data2.LogicalPageBounds.X - logicalPageBounds.X));
empty.Y = data2.ViewablePageBounds.Y + Math.Abs((int) (data2.LogicalPageBounds.Y - logicalPageBounds.Y));
pts = new Point[] { empty };
matrix2.TransformPoints(pts);
empty = new Point(pts[0].X - viewPortData.Translation.X, pts[0].Y - viewPortData.Translation.Y);
Rectangle source = Rectangle.Empty;
source.X = logicalPageBounds.X - viewPortData.LogicalViewPort.X;
source.Y = logicalPageBounds.Y - viewPortData.LogicalViewPort.Y;
source.Width = logicalPageBounds.Width;
source.Height = logicalPageBounds.Height;
pts = new Point[] { source.Location, new Point(source.Size) };
matrix2.TransformPoints(pts);
source.Location = pts[0];
source.Size = new Size(pts[1]);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, new Rectangle(empty, source.Size), source, DesignerContentAlignment.Fill, 1f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
graphics.Transform = matrix3;
graphics.DrawRectangle(Pens.Black, data2.PageBounds);
graphics.DrawRectangle(ambientTheme.ForegroundPen, (int) (data2.ViewablePageBounds.Left - 3), (int) (data2.ViewablePageBounds.Top - 3), (int) (data2.ViewablePageBounds.Width + 6), (int) (data2.ViewablePageBounds.Height + 6));
headerFooterPrintData.PageBounds = data2.PageBounds;
headerFooterPrintData.PageBoundsWithoutMargin = data2.ViewablePageBounds;
headerFooterPrintData.CurrentPage = num;
if (this.printDocument.PageSetupData.HeaderTemplate.Length > 0)
{
this.printDocument.PrintHeaderFooter(graphics, true, headerFooterPrintData);
}
if (this.printDocument.PageSetupData.FooterTemplate.Length > 0)
{
this.printDocument.PrintHeaderFooter(graphics, false, headerFooterPrintData);
}
}
}
graphics.EndContainer(container);
}
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
graphics.FillRectangle(Brushes.White, new Rectangle(Point.Empty, memoryBitmap.Size));
if (ambientTheme.WorkflowWatermarkImage != null)
{
GraphicsContainer container = graphics.BeginContainer();
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
matrix.Invert();
Point[] pts = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
matrix.TransformPoints(pts);
Rectangle rect = new Rectangle(pts[0], new Size(pts[1]));
matrix = new Matrix();
matrix.Scale((viewPortData.Scaling.Width / ((float) base.parentView.Zoom)) * 100f, (viewPortData.Scaling.Height / ((float) base.parentView.Zoom)) * 100f);
Matrix matrix2 = new Matrix();
matrix2.Scale(((float) base.parentView.Zoom) / 100f, ((float) base.parentView.Zoom) / 100f);
graphics.Transform = matrix2;
foreach (PageLayoutData data in this.pageLayoutInfo)
{
if (data.PageBounds.IntersectsWith(rect))
{
Rectangle empty = Rectangle.Empty;
empty.X = data.LogicalPageBounds.X - viewPortData.LogicalViewPort.X;
empty.Y = data.LogicalPageBounds.Y - viewPortData.LogicalViewPort.Y;
empty.Width = data.LogicalPageBounds.Width;
empty.Height = data.LogicalPageBounds.Height;
pts = new Point[] { empty.Location, new Point(empty.Size) };
matrix.TransformPoints(pts);
empty.Location = pts[0];
empty.Size = new Size(pts[1]);
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, empty, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, 0.25f, false);
}
}
graphics.EndContainer(container);
}
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
//Get the drawing canvas
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
//We set the highest quality interpolation so that we do not loose the image quality
GraphicsContainer graphicsState = graphics.BeginContainer();
//Fill the background using the workspace color so that we communicate the paging concept
Rectangle workspaceRectangle = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, workspaceRectangle);
using (Font headerFooterFont = new Font(ambientTheme.Font.FontFamily, ambientTheme.Font.Size / this.scaling, ambientTheme.Font.Style))
{
int currentPage = 0;
Matrix emptyMatrix = new Matrix();
//Create the transformation matrix and calculate the physical viewport without translation and scaling
//We need to get the physical view port due to the fact that there can be circustances when zoom percentage
//is very high, logical view port can be empty in such cases
Matrix coOrdTxMatrix = new Matrix();
coOrdTxMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
coOrdTxMatrix.Invert();
Point[] points = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
coOrdTxMatrix.TransformPoints(points);
coOrdTxMatrix.Invert();
Rectangle physicalViewPort = new Rectangle(points[0], new Size(points[1]));
//Create the data for rendering header/footer
WorkflowPrintDocument.HeaderFooterData headerFooterData = new WorkflowPrintDocument.HeaderFooterData();
headerFooterData.HeaderFooterMargins = this.headerFooterMargins;
headerFooterData.PrintTime = this.previewTime;
headerFooterData.TotalPages = this.pageLayoutInfo.Count;
headerFooterData.Scaling = this.scaling;
headerFooterData.Font = headerFooterFont;
WorkflowDesignerLoader serviceDesignerLoader = this.serviceProvider.GetService(typeof(WorkflowDesignerLoader)) as WorkflowDesignerLoader;
headerFooterData.FileName = (serviceDesignerLoader != null) ? serviceDesignerLoader.FileName : String.Empty;
//Create the viewport transformation matrix
Matrix viewPortMatrix = new Matrix();
viewPortMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
viewPortMatrix.Translate(-viewPortData.Translation.X, -viewPortData.Translation.Y, MatrixOrder.Append);
//We now have the viewport properly drawn, now we need to draw it on the actual graphics object
//Now that we have the designer bitmap we start splicing it based on the pages
//Note that this is quite expensive operation and hence one should try to use
//The memory bitmap we have got is scaled appropriately
foreach (PageLayoutData pageLayoutData in this.pageLayoutInfo)
{
currentPage += 1;
//We do not draw the non intersecting pages, get the intersected viewport
//We purposely use the physical viewport here because, there are cases in which the viewport
//will not contain any logical bitmap areas in which case we atleast need to draw the pages properly
if (!pageLayoutData.PageBounds.IntersectsWith(physicalViewPort) || pageLayoutData.PageBounds.Width <= 0 || pageLayoutData.PageBounds.Height <= 0)
continue;
//******START PAGE DRAWING, FIRST DRAW THE OUTLINE
//Scale and translate so that we can draw the pages
graphics.Transform = viewPortMatrix;
graphics.FillRectangle(Brushes.White, pageLayoutData.PageBounds);
ActivityDesignerPaint.DrawDropShadow(graphics, pageLayoutData.PageBounds, Color.Black, AmbientTheme.DropShadowWidth, LightSourcePosition.Left | LightSourcePosition.Top, 0.2f, false);
//***START BITMAP SPLICING
//Draw spliced bitmap for the page if we have any displayable area
Rectangle intersectedViewPort = pageLayoutData.LogicalPageBounds;
intersectedViewPort.Intersect(viewPortData.LogicalViewPort);
if (!intersectedViewPort.IsEmpty)
{
//Make sure that we now clear the translation factor
graphics.Transform = emptyMatrix;
//Paint bitmap on the pages
//Now that the page rectangle is actually drawn, we will scale down the Location of page rectangle
//so that we can draw the viewport bitmap part on it
Point bitmapDrawingPoint = Point.Empty;
bitmapDrawingPoint.X = pageLayoutData.ViewablePageBounds.X + Math.Abs(pageLayoutData.LogicalPageBounds.X - intersectedViewPort.X);
bitmapDrawingPoint.Y = pageLayoutData.ViewablePageBounds.Y + Math.Abs(pageLayoutData.LogicalPageBounds.Y - intersectedViewPort.Y);
points = new Point[] { bitmapDrawingPoint };
coOrdTxMatrix.TransformPoints(points);
bitmapDrawingPoint = new Point(points[0].X - viewPortData.Translation.X, points[0].Y - viewPortData.Translation.Y);
//This is the area of the viewport bitmap we need to copy on the page
Rectangle viewPortBitmapArea = Rectangle.Empty;
viewPortBitmapArea.X = intersectedViewPort.X - viewPortData.LogicalViewPort.X;
viewPortBitmapArea.Y = intersectedViewPort.Y - viewPortData.LogicalViewPort.Y;
viewPortBitmapArea.Width = intersectedViewPort.Width;
viewPortBitmapArea.Height = intersectedViewPort.Height;
//This rectangle is in translated logical units, we need to scale it down
points = new Point[] { viewPortBitmapArea.Location, new Point(viewPortBitmapArea.Size) };
coOrdTxMatrix.TransformPoints(points);
viewPortBitmapArea.Location = points[0];
viewPortBitmapArea.Size = new Size(points[1]);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, new Rectangle(bitmapDrawingPoint, viewPortBitmapArea.Size), viewPortBitmapArea, DesignerContentAlignment.Fill, 1.0f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
//***END BITMAP SPLICING
//Draw the page outline
graphics.Transform = viewPortMatrix;
graphics.DrawRectangle(Pens.Black, pageLayoutData.PageBounds);
//Draw the printable page outline
graphics.DrawRectangle(ambientTheme.ForegroundPen, pageLayoutData.ViewablePageBounds.Left - 3, pageLayoutData.ViewablePageBounds.Top - 3, pageLayoutData.ViewablePageBounds.Width + 6, pageLayoutData.ViewablePageBounds.Height + 6);
//Draw the header and footer after we draw the actual page
headerFooterData.PageBounds = pageLayoutData.PageBounds;
headerFooterData.PageBoundsWithoutMargin = pageLayoutData.ViewablePageBounds;
headerFooterData.CurrentPage = currentPage;
//Draw the header
if (this.printDocument.PageSetupData.HeaderTemplate.Length > 0)
this.printDocument.PrintHeaderFooter(graphics, true, headerFooterData);
//Draw footer
if (this.printDocument.PageSetupData.FooterTemplate.Length > 0)
this.printDocument.PrintHeaderFooter(graphics, false, headerFooterData);
//***END DRAWING HEADER FOOTER
}
graphics.EndContainer(graphicsState);
}
}
public abstract void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData);
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
//Fill the background using the workspace color so that we communicate the paging concept
graphics.FillRectangle(Brushes.White, new Rectangle(Point.Empty, memoryBitmap.Size));
//Fill the background using the workspace color so that we communicate the paging concept
//if there is no workflow watermark, just return
if (ambientTheme.WorkflowWatermarkImage == null)
{
return;
}
//Create the transformation matrix and calculate the physical viewport without translation and scaling
//We need to get the physical view port due to the fact that there can be circustances when zoom percentage
//is very high, logical view port can be empty in such cases
GraphicsContainer graphicsState = graphics.BeginContainer();
Matrix coOrdTxMatrix = new Matrix();
coOrdTxMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
coOrdTxMatrix.Invert();
Point[] points = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
coOrdTxMatrix.TransformPoints(points);
Rectangle physicalViewPort = new Rectangle(points[0], new Size(points[1]));
//because the watermark image needs to be scaled according to the zoom level, we
//a) scale the graphics of the bitmap up by the zoom factor
//a) scale the coordinates transform matrix down by the zoom factor
coOrdTxMatrix = new Matrix();
coOrdTxMatrix.Scale(viewPortData.Scaling.Width / (float)this.parentView.Zoom * 100.0f, viewPortData.Scaling.Height / (float)this.parentView.Zoom * 100.0f);
//Make sure that we now clear the translation factor
Matrix graphicsMatrics = new Matrix();
graphicsMatrics.Scale((float)this.parentView.Zoom / 100.0f, (float)this.parentView.Zoom / 100.0f);
graphics.Transform = graphicsMatrics;
foreach (PageLayoutData pageLayoutData in this.pageLayoutInfo)
{
//We do not draw the non intersecting pages, get the intersected viewport
//We purposely use the physical viewport here because, there are cases in which the viewport
//will not contain any logical bitmap areas in which case we atleast need to draw the pages properly
if (!pageLayoutData.PageBounds.IntersectsWith(physicalViewPort))
{
continue;
}
//Draw the watermark into the in-memory bitmap
//This is the area of the viewport bitmap we need to copy on the page
Rectangle viewPortBitmapArea = Rectangle.Empty;
viewPortBitmapArea.X = pageLayoutData.LogicalPageBounds.X - viewPortData.LogicalViewPort.X;
viewPortBitmapArea.Y = pageLayoutData.LogicalPageBounds.Y - viewPortData.LogicalViewPort.Y;
viewPortBitmapArea.Width = pageLayoutData.LogicalPageBounds.Width;
viewPortBitmapArea.Height = pageLayoutData.LogicalPageBounds.Height;
//This rectangle is in translated logical units, we need to scale it down
points = new Point[] { viewPortBitmapArea.Location, new Point(viewPortBitmapArea.Size) };
coOrdTxMatrix.TransformPoints(points);
viewPortBitmapArea.Location = points[0];
viewPortBitmapArea.Size = new Size(points[1]);
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, viewPortBitmapArea, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, AmbientTheme.WatermarkTransparency, false);
}
//Now clear the matrix
graphics.EndContainer(graphicsState);
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
//Fill the background using the workspace color so that we communicate the paging concept
graphics.FillRectangle(Brushes.White, new Rectangle(Point.Empty, memoryBitmap.Size));
//Fill the background using the workspace color so that we communicate the paging concept
//if there is no workflow watermark, just return
if (ambientTheme.WorkflowWatermarkImage == null)
return;
//Create the transformation matrix and calculate the physical viewport without translation and scaling
//We need to get the physical view port due to the fact that there can be circustances when zoom percentage
//is very high, logical view port can be empty in such cases
GraphicsContainer graphicsState = graphics.BeginContainer();
Matrix coOrdTxMatrix = new Matrix();
coOrdTxMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
coOrdTxMatrix.Invert();
Point[] points = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
coOrdTxMatrix.TransformPoints(points);
Rectangle physicalViewPort = new Rectangle(points[0], new Size(points[1]));
//because the watermark image needs to be scaled according to the zoom level, we
//a) scale the graphics of the bitmap up by the zoom factor
//a) scale the coordinates transform matrix down by the zoom factor
coOrdTxMatrix = new Matrix();
coOrdTxMatrix.Scale(viewPortData.Scaling.Width / (float)this.parentView.Zoom * 100.0f, viewPortData.Scaling.Height / (float)this.parentView.Zoom * 100.0f);
//Make sure that we now clear the translation factor
Matrix graphicsMatrics = new Matrix();
graphicsMatrics.Scale((float)this.parentView.Zoom / 100.0f, (float)this.parentView.Zoom / 100.0f);
graphics.Transform = graphicsMatrics;
foreach (PageLayoutData pageLayoutData in this.pageLayoutInfo)
{
//We do not draw the non intersecting pages, get the intersected viewport
//We purposely use the physical viewport here because, there are cases in which the viewport
//will not contain any logical bitmap areas in which case we atleast need to draw the pages properly
if (!pageLayoutData.PageBounds.IntersectsWith(physicalViewPort))
continue;
//Draw the watermark into the in-memory bitmap
//This is the area of the viewport bitmap we need to copy on the page
Rectangle viewPortBitmapArea = Rectangle.Empty;
viewPortBitmapArea.X = pageLayoutData.LogicalPageBounds.X - viewPortData.LogicalViewPort.X;
viewPortBitmapArea.Y = pageLayoutData.LogicalPageBounds.Y - viewPortData.LogicalViewPort.Y;
viewPortBitmapArea.Width = pageLayoutData.LogicalPageBounds.Width;
viewPortBitmapArea.Height = pageLayoutData.LogicalPageBounds.Height;
//This rectangle is in translated logical units, we need to scale it down
points = new Point[] { viewPortBitmapArea.Location, new Point(viewPortBitmapArea.Size) };
coOrdTxMatrix.TransformPoints(points);
viewPortBitmapArea.Location = points[0];
viewPortBitmapArea.Size = new Size(points[1]);
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, viewPortBitmapArea, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, AmbientTheme.WatermarkTransparency, false);
}
//Now clear the matrix
graphics.EndContainer(graphicsState);
}
internal static void TakeWorkflowSnapShot(WorkflowView workflowView, ViewPortData viewPortData)
{
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
using (Graphics graphics = Graphics.FromImage(memoryBitmap))
{
graphics.SmoothingMode = SmoothingMode.HighQuality;
graphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
using (PaintEventArgs args = new PaintEventArgs(graphics, viewPortData.LogicalViewPort))
{
workflowView.ActiveLayout.OnPaint(args, viewPortData);
}
Matrix matrix = new Matrix();
matrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
Point[] pts = new Point[] { viewPortData.LogicalViewPort.Location };
matrix.TransformPoints(pts);
matrix.Translate((float) (-pts[0].X + viewPortData.ShadowDepth.Width), (float) (-pts[0].Y + viewPortData.ShadowDepth.Height), MatrixOrder.Append);
graphics.Transform = matrix;
if (workflowView.RootDesigner != null)
{
using (Region region = new Region())
{
using (GraphicsPath path = ActivityDesignerPaint.GetDesignerPath(workflowView.RootDesigner, false))
{
Region clip = graphics.Clip;
region.MakeEmpty();
region.Union(path);
graphics.Clip = region;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
graphics.FillRectangle(ambientTheme.BackgroundBrush, workflowView.RootDesigner.Bounds);
if (ambientTheme.ShowGrid)
{
ActivityDesignerPaint.DrawGrid(graphics, workflowView.RootDesigner.Bounds);
}
graphics.Clip = clip;
try
{
using (PaintEventArgs args2 = new PaintEventArgs(graphics, viewPortData.LogicalViewPort))
{
((IWorkflowDesignerMessageSink) workflowView.RootDesigner).OnPaint(args2, viewPortData.LogicalViewPort);
}
}
catch (Exception)
{
}
}
}
}
using (PaintEventArgs args3 = new PaintEventArgs(graphics, workflowView.RootDesigner.Bounds))
{
using (WorkflowMessageDispatchData data = new WorkflowMessageDispatchData(workflowView, EventArgs.Empty))
{
foreach (WorkflowDesignerMessageFilter filter in data.Filters)
{
try
{
if (((IWorkflowDesignerMessageSink) filter).OnPaint(args3, viewPortData.LogicalViewPort))
{
goto Label_0230;
}
}
catch (Exception)
{
}
}
}
}
Label_0230:
graphics.Transform = new Matrix();
if (!viewPortData.ShadowDepth.IsEmpty)
{
Bitmap image = new Bitmap(memoryBitmap);
using (Brush brush = new SolidBrush(Color.FromArgb(220, Color.White)))
{
graphics.FillRectangle(brush, new Rectangle(Point.Empty, new Size((memoryBitmap.Size.Width - viewPortData.ShadowDepth.Width) - 1, (memoryBitmap.Size.Height - viewPortData.ShadowDepth.Height) - 1)));
}
ImageAttributes imageAttr = new ImageAttributes();
imageAttr.SetColorKey(viewPortData.TransparentColor, viewPortData.TransparentColor, ColorAdjustType.Default);
imageAttr.SetColorKey(viewPortData.TransparentColor, viewPortData.TransparentColor, ColorAdjustType.Bitmap);
graphics.DrawImage(image, new Rectangle(-viewPortData.ShadowDepth.Width, -viewPortData.ShadowDepth.Height, memoryBitmap.Width, memoryBitmap.Height), 0, 0, memoryBitmap.Width, memoryBitmap.Height, GraphicsUnit.Pixel, imageAttr);
image.Dispose();
}
}
}
//This function will give snapshot of what is drawn on the screen at any point of time
//It will scale and translate the designers and drawing based on the viewport data
//We need this function in OnPaint and taking snapshot of magnifier bitmap
//At the end of this function; the ViewPortData.MemoryBitmap will contain the bitmap of the
//workflow to be drawn as per layout
internal static void TakeWorkflowSnapShot(WorkflowView workflowView, ViewPortData viewPortData)
{
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
using (Graphics viewPortGraphics = Graphics.FromImage(memoryBitmap))
{
//We set the highest quality interpolation so that we do not loose the image quality
viewPortGraphics.SmoothingMode = SmoothingMode.HighQuality;
viewPortGraphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
using (PaintEventArgs eventArgs = new PaintEventArgs(viewPortGraphics, viewPortData.LogicalViewPort))
{
workflowView.ActiveLayout.OnPaint(eventArgs, viewPortData);
}
//Create the scaling matrix
Matrix transformationMatrix = new Matrix();
transformationMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
//When we draw on the viewport we draw in scaled and translated.
//So that we minimize the calls to DrawImage
//Make sure that we scale down the logical view port origin in order to take care of scaling factor
//Before we select the transform factor we make sure that logicalviewport origin is scaled down
Point[] logicalViewPortOrigin = new Point[] { viewPortData.LogicalViewPort.Location };
transformationMatrix.TransformPoints(logicalViewPortOrigin);
//For performance improvement and to eliminate one extra DrawImage...we draw the designers on the viewport
//bitmap with visual depth consideration
transformationMatrix.Translate(-logicalViewPortOrigin[0].X + viewPortData.ShadowDepth.Width, -logicalViewPortOrigin[0].Y + viewPortData.ShadowDepth.Height, MatrixOrder.Append);
//Select the transform into viewport graphics.
//Viewport bitmap has the scaled and translated designers which we then map to
//the actual graphics based on page layout
viewPortGraphics.Transform = transformationMatrix;
//Draw the designers on bitmap
if (workflowView.RootDesigner != null)
{
using (Region clipRegion = new Region())
using (GraphicsPath designerPath = ActivityDesignerPaint.GetDesignerPath(workflowView.RootDesigner, false))
{
Region oldRegion = viewPortGraphics.Clip;
//First draw the grid and rectangle with the designer clip region
clipRegion.MakeEmpty();
clipRegion.Union(designerPath);
viewPortGraphics.Clip = clipRegion;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
viewPortGraphics.FillRectangle(ambientTheme.BackgroundBrush, workflowView.RootDesigner.Bounds);
if (ambientTheme.ShowGrid)
ActivityDesignerPaint.DrawGrid(viewPortGraphics, workflowView.RootDesigner.Bounds);
viewPortGraphics.Clip = oldRegion;
//Then draw the root with clip region extended
try
{
using (PaintEventArgs paintEventArgs = new PaintEventArgs(viewPortGraphics, viewPortData.LogicalViewPort))
{
((IWorkflowDesignerMessageSink)workflowView.RootDesigner).OnPaint(paintEventArgs, viewPortData.LogicalViewPort);
}
}
catch (Exception e)
{
//Eat the exception thrown in draw
Debug.WriteLine(e);
}
}
}
//Draw all the filters
using (PaintEventArgs paintArgs = new PaintEventArgs(viewPortGraphics, workflowView.RootDesigner.Bounds))
{
using (WorkflowMessageDispatchData dispatchData = new WorkflowMessageDispatchData(workflowView, EventArgs.Empty))
{
foreach (WorkflowDesignerMessageFilter filter in dispatchData.Filters)
{
try
{
if (((IWorkflowDesignerMessageSink)filter).OnPaint(paintArgs, viewPortData.LogicalViewPort))
break;
}
catch (Exception e)
{
Debug.WriteLine(e);
}
}
}
}
viewPortGraphics.Transform = new Matrix();
//Now that we have a bitmap which is bit offseted based visual depth we need to take copy of it
//This is done so as to avoid expensive DrawImage call, what I am assuming here is that time it
//will take to create a new bitmap from an existing one is less expensive in terms of speed than space
//As you just need to copy bitmap bits in memory than to perform expesive Image Drawing operation
if (!viewPortData.ShadowDepth.IsEmpty)
{
Bitmap temporaryBitmap = new Bitmap(memoryBitmap);
//THEMETODO: WE JUST NEED TO GRAYSCALE THIS, RATHER THAN DRAWING A SHADOW
//Now that we have taken a copy we will draw over the existing bitmap so that we can make it as shadow bitmap
using (Brush shadowDepthBrush = new SolidBrush(Color.FromArgb(220, Color.White)))
viewPortGraphics.FillRectangle(shadowDepthBrush, new Rectangle(Point.Empty, new Size(memoryBitmap.Size.Width - viewPortData.ShadowDepth.Width - 1, memoryBitmap.Size.Height - viewPortData.ShadowDepth.Height - 1)));
//Now make sure that we draw the image from the temporary bitmap with white color set as transparent
//so that we achive the 3D effect
//Make sure that we take into consideration the transparency key
ImageAttributes transparentColorKey = new ImageAttributes();
transparentColorKey.SetColorKey(viewPortData.TransparentColor, viewPortData.TransparentColor, ColorAdjustType.Default);
transparentColorKey.SetColorKey(viewPortData.TransparentColor, viewPortData.TransparentColor, ColorAdjustType.Bitmap);
viewPortGraphics.DrawImage(temporaryBitmap, new Rectangle(-viewPortData.ShadowDepth.Width, -viewPortData.ShadowDepth.Height, memoryBitmap.Width, memoryBitmap.Height), 0, 0, memoryBitmap.Width, memoryBitmap.Height, GraphicsUnit.Pixel, transparentColorKey);
//Now dispose the temporary bitmap
temporaryBitmap.Dispose();
}
}
}
protected override void OnPaint(PaintEventArgs e)
{
base.OnPaint(e);
//We set the highest quality interpolation so that we do not loose the image quality
GraphicsContainer graphicsState = e.Graphics.BeginContainer();
e.Graphics.SmoothingMode = SmoothingMode.HighQuality;
e.Graphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
e.Graphics.CompositingQuality = CompositingQuality.HighQuality;
bool takeWorkflowSnapShot = (this.viewPortBitmap == null || this.viewPortBitmap.Size != ViewPortSize);
if (takeWorkflowSnapShot)
{
if (this.viewPortBitmap != null)
this.viewPortBitmap.Dispose();
this.viewPortBitmap = new Bitmap(Math.Max(1, ViewPortSize.Width), Math.Max(1, ViewPortSize.Height), e.Graphics);
}
//Create viewport information and take the workflow snapshot before passing on the information to the active layout
ViewPortData viewPortData = new ViewPortData();
viewPortData.LogicalViewPort = ClientRectangleToLogical(new Rectangle(Point.Empty, ViewPortSize));
viewPortData.MemoryBitmap = this.viewPortBitmap;
viewPortData.Scaling = new SizeF(ScaleZoomFactor, ScaleZoomFactor);
viewPortData.Translation = ScrollPosition;
viewPortData.ShadowDepth = new Size(this.shadowDepth, this.shadowDepth);
viewPortData.ViewPortSize = ViewPortSize;
//capture the workflow onto in-memory bitmap
if (this.layoutEventHandler == null || takeWorkflowSnapShot)
WorkflowView.TakeWorkflowSnapShot(this, viewPortData);
//copy workflow from the bitmap onto corresponding pages on the screen
try
{
this.activeLayout.OnPaintWorkflow(e, viewPortData);
}
catch (Exception ex)
{
//If a layout throws an exception then we will not draw the layout
//
Debug.WriteLine(ex);
}
//If any of the message filters throws an exception we continue to draw
using (WorkflowMessageDispatchData dispatchData = new WorkflowMessageDispatchData(this, EventArgs.Empty))
{
foreach (WorkflowDesignerMessageFilter filter in dispatchData.Filters)
{
try
{
if (((IWorkflowDesignerMessageSink)filter).OnPaintWorkflowAdornments(e, ViewPortRectangle))
break;
}
catch (Exception ex)
{
//Ignore the filter throwing the exception and continue to function
Debug.WriteLine(ex);
}
}
}
e.Graphics.EndContainer(graphicsState);
e.Graphics.FillRectangle(SystemBrushes.Control, new Rectangle(Width - SystemInformation.VerticalScrollBarWidth, Height - SystemInformation.HorizontalScrollBarHeight, SystemInformation.VerticalScrollBarWidth, SystemInformation.HorizontalScrollBarHeight));
}
public abstract void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData);
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
//Get the drawing canvas
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
//We set the highest quality interpolation so that we do not loose the image quality
GraphicsContainer graphicsState = graphics.BeginContainer();
//Fill the background using the workspace color so that we communicate the paging concept
Rectangle workspaceRectangle = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, workspaceRectangle);
using (Font headerFooterFont = new Font(ambientTheme.Font.FontFamily, ambientTheme.Font.Size / this.scaling, ambientTheme.Font.Style))
{
int currentPage = 0;
Matrix emptyMatrix = new Matrix();
//Create the transformation matrix and calculate the physical viewport without translation and scaling
//We need to get the physical view port due to the fact that there can be circustances when zoom percentage
//is very high, logical view port can be empty in such cases
Matrix coOrdTxMatrix = new Matrix();
coOrdTxMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
coOrdTxMatrix.Invert();
Point[] points = new Point[] { viewPortData.Translation, new Point(viewPortData.ViewPortSize) };
coOrdTxMatrix.TransformPoints(points);
coOrdTxMatrix.Invert();
Rectangle physicalViewPort = new Rectangle(points[0], new Size(points[1]));
//Create the data for rendering header/footer
WorkflowPrintDocument.HeaderFooterData headerFooterData = new WorkflowPrintDocument.HeaderFooterData();
headerFooterData.HeaderFooterMargins = this.headerFooterMargins;
headerFooterData.PrintTime = this.previewTime;
headerFooterData.TotalPages = this.pageLayoutInfo.Count;
headerFooterData.Scaling = this.scaling;
headerFooterData.Font = headerFooterFont;
WorkflowDesignerLoader serviceDesignerLoader = this.serviceProvider.GetService(typeof(WorkflowDesignerLoader)) as WorkflowDesignerLoader;
headerFooterData.FileName = (serviceDesignerLoader != null) ? serviceDesignerLoader.FileName : String.Empty;
//Create the viewport transformation matrix
Matrix viewPortMatrix = new Matrix();
viewPortMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
viewPortMatrix.Translate(-viewPortData.Translation.X, -viewPortData.Translation.Y, MatrixOrder.Append);
//We now have the viewport properly drawn, now we need to draw it on the actual graphics object
//Now that we have the designer bitmap we start splicing it based on the pages
//Note that this is quite expensive operation and hence one should try to use
//The memory bitmap we have got is scaled appropriately
foreach (PageLayoutData pageLayoutData in this.pageLayoutInfo)
{
currentPage += 1;
//We do not draw the non intersecting pages, get the intersected viewport
//We purposely use the physical viewport here because, there are cases in which the viewport
//will not contain any logical bitmap areas in which case we atleast need to draw the pages properly
if (!pageLayoutData.PageBounds.IntersectsWith(physicalViewPort) || pageLayoutData.PageBounds.Width <= 0 || pageLayoutData.PageBounds.Height <= 0)
{
continue;
}
//******START PAGE DRAWING, FIRST DRAW THE OUTLINE
//Scale and translate so that we can draw the pages
graphics.Transform = viewPortMatrix;
graphics.FillRectangle(Brushes.White, pageLayoutData.PageBounds);
ActivityDesignerPaint.DrawDropShadow(graphics, pageLayoutData.PageBounds, Color.Black, AmbientTheme.DropShadowWidth, LightSourcePosition.Left | LightSourcePosition.Top, 0.2f, false);
//***START BITMAP SPLICING
//Draw spliced bitmap for the page if we have any displayable area
Rectangle intersectedViewPort = pageLayoutData.LogicalPageBounds;
intersectedViewPort.Intersect(viewPortData.LogicalViewPort);
if (!intersectedViewPort.IsEmpty)
{
//Make sure that we now clear the translation factor
graphics.Transform = emptyMatrix;
//Paint bitmap on the pages
//Now that the page rectangle is actually drawn, we will scale down the Location of page rectangle
//so that we can draw the viewport bitmap part on it
Point bitmapDrawingPoint = Point.Empty;
bitmapDrawingPoint.X = pageLayoutData.ViewablePageBounds.X + Math.Abs(pageLayoutData.LogicalPageBounds.X - intersectedViewPort.X);
bitmapDrawingPoint.Y = pageLayoutData.ViewablePageBounds.Y + Math.Abs(pageLayoutData.LogicalPageBounds.Y - intersectedViewPort.Y);
points = new Point[] { bitmapDrawingPoint };
coOrdTxMatrix.TransformPoints(points);
bitmapDrawingPoint = new Point(points[0].X - viewPortData.Translation.X, points[0].Y - viewPortData.Translation.Y);
//This is the area of the viewport bitmap we need to copy on the page
Rectangle viewPortBitmapArea = Rectangle.Empty;
viewPortBitmapArea.X = intersectedViewPort.X - viewPortData.LogicalViewPort.X;
viewPortBitmapArea.Y = intersectedViewPort.Y - viewPortData.LogicalViewPort.Y;
viewPortBitmapArea.Width = intersectedViewPort.Width;
viewPortBitmapArea.Height = intersectedViewPort.Height;
//This rectangle is in translated logical units, we need to scale it down
points = new Point[] { viewPortBitmapArea.Location, new Point(viewPortBitmapArea.Size) };
coOrdTxMatrix.TransformPoints(points);
viewPortBitmapArea.Location = points[0];
viewPortBitmapArea.Size = new Size(points[1]);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, new Rectangle(bitmapDrawingPoint, viewPortBitmapArea.Size), viewPortBitmapArea, DesignerContentAlignment.Fill, 1.0f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
//***END BITMAP SPLICING
//Draw the page outline
graphics.Transform = viewPortMatrix;
graphics.DrawRectangle(Pens.Black, pageLayoutData.PageBounds);
//Draw the printable page outline
graphics.DrawRectangle(ambientTheme.ForegroundPen, pageLayoutData.ViewablePageBounds.Left - 3, pageLayoutData.ViewablePageBounds.Top - 3, pageLayoutData.ViewablePageBounds.Width + 6, pageLayoutData.ViewablePageBounds.Height + 6);
//Draw the header and footer after we draw the actual page
headerFooterData.PageBounds = pageLayoutData.PageBounds;
headerFooterData.PageBoundsWithoutMargin = pageLayoutData.ViewablePageBounds;
headerFooterData.CurrentPage = currentPage;
//Draw the header
if (this.printDocument.PageSetupData.HeaderTemplate.Length > 0)
{
this.printDocument.PrintHeaderFooter(graphics, true, headerFooterData);
}
//Draw footer
if (this.printDocument.PageSetupData.FooterTemplate.Length > 0)
{
this.printDocument.PrintHeaderFooter(graphics, false, headerFooterData);
}
//***END DRAWING HEADER FOOTER
}
graphics.EndContainer(graphicsState);
}
}
//Gets the snapshot of the entire workflow
private Bitmap TakeWorkflowSnapShot()
{
Bitmap bitmap = null;
ActivityDesigner rootDesigner = RootDesigner;
if (rootDesigner != null)
{
using (Graphics graphics = CreateGraphics())
{
ViewPortData viewPortData = new ViewPortData();
viewPortData.LogicalViewPort = new Rectangle(Point.Empty, new Size(rootDesigner.Bounds.Width + 2 * DefaultWorkflowLayout.Separator.Width, rootDesigner.Bounds.Height + 2 * DefaultWorkflowLayout.Separator.Height));
viewPortData.MemoryBitmap = new Bitmap(viewPortData.LogicalViewPort.Width, viewPortData.LogicalViewPort.Height, graphics);
viewPortData.Scaling = new SizeF(1, 1);
viewPortData.Translation = Point.Empty;
viewPortData.ShadowDepth = new Size(0, 0);
viewPortData.ViewPortSize = viewPortData.LogicalViewPort.Size;
TakeWorkflowSnapShot(this, viewPortData);
bitmap = viewPortData.MemoryBitmap;
}
}
return bitmap;
}
//
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
//Fill the background using the workspace color so that we communicate the paging concept
Rectangle workspaceRectangle = new Rectangle(Point.Empty, memoryBitmap.Size);
graphics.FillRectangle(AmbientTheme.WorkspaceBackgroundBrush, workspaceRectangle);
if (this.parentView.RootDesigner != null &&
this.parentView.RootDesigner.Bounds.Width >= 0 && this.parentView.RootDesigner.Bounds.Height >= 0)
{
GraphicsContainer graphicsState = graphics.BeginContainer();
//Create the scaling matrix
Matrix transformationMatrix = new Matrix();
transformationMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
//When we draw on the viewport we draw in scaled and translated.
//So that we minimize the calls to DrawImage
//Make sure that we scale down the logical view port origin in order to take care of scaling factor
//Before we select the transform factor we make sure that logicalviewport origin is scaled down
Point[] logicalViewPortOrigin = new Point[] { viewPortData.LogicalViewPort.Location };
transformationMatrix.TransformPoints(logicalViewPortOrigin);
//For performance improvement and to eliminate one extra DrawImage...we draw the designers on the viewport
//bitmap with visual depth consideration
transformationMatrix.Translate(-logicalViewPortOrigin[0].X + viewPortData.ShadowDepth.Width, -logicalViewPortOrigin[0].Y + viewPortData.ShadowDepth.Height, MatrixOrder.Append);
//Select the transform into viewport graphics.
//Viewport bitmap has the scaled and translated designers which we then map to
//the actual graphics based on page layout
graphics.Transform = transformationMatrix;
using (Region clipRegion = new Region(ActivityDesignerPaint.GetDesignerPath(this.parentView.RootDesigner, false)))
{
Region oldRegion = graphics.Clip;
graphics.Clip = clipRegion;
AmbientTheme ambientTheme = WorkflowTheme.CurrentTheme.AmbientTheme;
graphics.FillRectangle(Brushes.White, this.parentView.RootDesigner.Bounds);
if (ambientTheme.WorkflowWatermarkImage != null)
ActivityDesignerPaint.DrawImage(graphics, ambientTheme.WorkflowWatermarkImage, this.parentView.RootDesigner.Bounds, new Rectangle(Point.Empty, ambientTheme.WorkflowWatermarkImage.Size), ambientTheme.WatermarkAlignment, AmbientTheme.WatermarkTransparency, false);
graphics.Clip = oldRegion;
}
graphics.EndContainer(graphicsState);
}
}
private Bitmap TakeWorkflowSnapShot()
{
Bitmap bitmap = null;
ActivityDesigner rootDesigner = this.RootDesigner;
if (rootDesigner == null)
{
return bitmap;
}
using (Graphics graphics = base.CreateGraphics())
{
ViewPortData data;
data = new ViewPortData {
LogicalViewPort = new Rectangle(Point.Empty, new Size(rootDesigner.Bounds.Width + (2 * DefaultWorkflowLayout.Separator.Width), rootDesigner.Bounds.Height + (2 * DefaultWorkflowLayout.Separator.Height))),
MemoryBitmap = new Bitmap(data.LogicalViewPort.Width, data.LogicalViewPort.Height, graphics),
Scaling = new SizeF(1f, 1f),
Translation = Point.Empty,
ShadowDepth = new Size(0, 0),
ViewPortSize = data.LogicalViewPort.Size
};
TakeWorkflowSnapShot(this, data);
return data.MemoryBitmap;
}
}
public override void OnPaintWorkflow(PaintEventArgs e, ViewPortData viewPortData)
{
Graphics graphics = e.Graphics;
Debug.Assert(graphics != null);
//Get the drawing canvas
Bitmap memoryBitmap = viewPortData.MemoryBitmap;
Debug.Assert(memoryBitmap != null);
Rectangle bitmapArea = new Rectangle(Point.Empty, memoryBitmap.Size);
ActivityDesignerPaint.DrawImage(graphics, memoryBitmap, bitmapArea, bitmapArea, DesignerContentAlignment.Fill, 1.0f, WorkflowTheme.CurrentTheme.AmbientTheme.DrawGrayscale);
}
protected override void OnPaint(PaintEventArgs e)
{
base.OnPaint(e);
GraphicsContainer container = e.Graphics.BeginContainer();
e.Graphics.SmoothingMode = SmoothingMode.HighQuality;
e.Graphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
e.Graphics.CompositingQuality = CompositingQuality.HighQuality;
bool flag = (this.viewPortBitmap == null) || (this.viewPortBitmap.Size != this.ViewPortSize);
if (flag)
{
if (this.viewPortBitmap != null)
{
this.viewPortBitmap.Dispose();
}
this.viewPortBitmap = new Bitmap(Math.Max(1, this.ViewPortSize.Width), Math.Max(1, this.ViewPortSize.Height), e.Graphics);
}
ViewPortData viewPortData = new ViewPortData {
LogicalViewPort = this.ClientRectangleToLogical(new Rectangle(Point.Empty, this.ViewPortSize)),
MemoryBitmap = this.viewPortBitmap,
Scaling = new SizeF(this.ScaleZoomFactor, this.ScaleZoomFactor),
Translation = this.ScrollPosition,
ShadowDepth = new Size(this.shadowDepth, this.shadowDepth),
ViewPortSize = this.ViewPortSize
};
if ((this.layoutEventHandler == null) || flag)
{
TakeWorkflowSnapShot(this, viewPortData);
}
try
{
this.activeLayout.OnPaintWorkflow(e, viewPortData);
}
catch (Exception)
{
}
using (WorkflowMessageDispatchData data2 = new WorkflowMessageDispatchData(this, EventArgs.Empty))
{
foreach (WorkflowDesignerMessageFilter filter in data2.Filters)
{
try
{
if (((IWorkflowDesignerMessageSink) filter).OnPaintWorkflowAdornments(e, this.ViewPortRectangle))
{
goto Label_01A0;
}
}
catch (Exception)
{
}
}
}
Label_01A0:
e.Graphics.EndContainer(container);
e.Graphics.FillRectangle(SystemBrushes.Control, new Rectangle(base.Width - SystemInformation.VerticalScrollBarWidth, base.Height - SystemInformation.HorizontalScrollBarHeight, SystemInformation.VerticalScrollBarWidth, SystemInformation.HorizontalScrollBarHeight));
}
public override void OnPaint(PaintEventArgs e, ViewPortData viewPortData)
{
base.OnPaint(e, viewPortData);
Graphics graphics = e.Graphics;
if (this.parentView.RootDesigner != null &&
this.parentView.RootDesigner.Bounds.Width >= 0 && this.parentView.RootDesigner.Bounds.Height >= 0)
{
GraphicsContainer graphicsState = graphics.BeginContainer();
//Create the scaling matrix
Matrix transformationMatrix = new Matrix();
transformationMatrix.Scale(viewPortData.Scaling.Width, viewPortData.Scaling.Height, MatrixOrder.Prepend);
//When we draw on the viewport we draw in scaled and translated.
//So that we minimize the calls to DrawImage
//Make sure that we scale down the logical view port origin in order to take care of scaling factor
//Before we select the transform factor we make sure that logicalviewport origin is scaled down
Point[] logicalViewPortOrigin = new Point[] { viewPortData.LogicalViewPort.Location };
transformationMatrix.TransformPoints(logicalViewPortOrigin);
//For performance improvement and to eliminate one extra DrawImage...we draw the designers on the viewport
//bitmap with visual depth consideration
transformationMatrix.Translate(-logicalViewPortOrigin[0].X + viewPortData.ShadowDepth.Width, -logicalViewPortOrigin[0].Y + viewPortData.ShadowDepth.Height, MatrixOrder.Append);
//Select the transform into viewport graphics.
//Viewport bitmap has the scaled and translated designers which we then map to
//the actual graphics based on page layout
graphics.Transform = transformationMatrix;
Rectangle rootBounds = this.parentView.RootDesigner.Bounds;
graphics.ExcludeClip(rootBounds);
rootBounds.Inflate(ActivityRootLayout.Separator.Width / 2, ActivityRootLayout.Separator.Height / 2);
ActivityDesignerPaint.DrawDropShadow(graphics, rootBounds, AmbientTheme.WorkflowBorderPen.Color, AmbientTheme.DropShadowWidth, LightSourcePosition.Left | LightSourcePosition.Top, 0.2f, false);
graphics.FillRectangle(WorkflowTheme.CurrentTheme.AmbientTheme.BackgroundBrush, rootBounds);
graphics.DrawRectangle(AmbientTheme.WorkflowBorderPen, rootBounds);
graphics.EndContainer(graphicsState);
}
}