public Dictionary <string, dynamic> AssembleMetrics()
{
return(new Dictionary <string, dynamic>
{
{ "QC:4000053", RTDuration },
{ "QC:02", swathSizeDifference },
{ "QC:4000059", Run.Ms1Scans.Count() },
{ "QC:4000060", Run.Ms2Scans.Count() },
{ "QC:04", SwathMetrics.swathTargets.Count() },
{ "QC:05", SwathMetrics.swathTargets },
{ "QC:06", Density.Sum() },
{ "QC:07", Density.ElementAt(Density.Count() / 2) },
{ "QC:08", InterQuartileRangeCalculator.CalcIQR(Density) },
{ "QC:09", SwathMetrics.numOfSwathPerGroup },
{ "QC:10", SwathMetrics.mzRange },
{ "QC:11", SwathMetrics.SwathProportionOfTotalTIC },
{ "QC:12", SwathMetrics.swDensity50 },
{ "QC:13", SwathMetrics.swDensityIQR },
{ "QC:14", RtMetrics.Peakwidths },
{ "QC:15", RtMetrics.PeakCapacity },
{ "QC:16", RtMetrics.MS1PeakPrecision },
{ "QC:17", RtMetrics.TicChange50List },
{ "QC:18", RtMetrics.TicChangeIqrList },
{ "QC:19", RtMetrics.CycleTime },
{ "QC:20", RtMetrics.MS2Density },
{ "QC:21", RtMetrics.MS1Density },
{ "QC:22", RtMetrics.MS2TicTotal },
{ "QC:23", RtMetrics.MS1TicTotal },
{ "QC:24", RtMetrics.TailingFactor }
});
}
public SwathMetrics GroupBySwath(Run <Scan> run)
{
//Create list of target isolationwindows to serve as swathnumber
List <double> swathTargets = new List <double>();
// Force ordering of swathTargets so that our tests don't depend on the order that Distinct() happens to impose.
swathTargets = run.Ms2Scans.Select(x => x.IsolationWindowTargetMz).Distinct().OrderBy(x => x).ToList();
double totalTIC = 0;
foreach (var scan in run.Ms2Scans)
{
totalTIC += scan.TotalIonCurrent;
}
//Loop through every swath of a certain swathNumber:
List <int> numOfSwathPerGroup = new List <int>();
List <double> TICs = new List <double>();
List <double> swDensity = new List <double>();
List <double> swDensity50 = new List <double>();
List <double?> swDensityIQR = new List <double?>();
List <double> mzTargetRange = new List <double>();
List <double> averageMzTargetRange = new List <double>();
List <double> SwathProportionOfTotalTIC = new List <double>();
List <double> TotalSwathProportionPredictedSingleCharge = new List <double>();
List <double> SwathProportionPredictedSingleChargeAvg = new List <double>();
//Loop through all the swaths of the same number and add to
for (int swathNumber = 0; swathNumber < swathTargets.Count(); swathNumber++)
{
int track = 0;
double TICthisSwath = 0;
var orderedMS2Scans = run.Ms2Scans
.Where(x => x.IsolationWindowTargetMz == swathTargets[swathNumber]); // Turns out ordering is not required; users of this either don't care about order or sort their own results.
foreach (var scan in orderedMS2Scans)
{
mzTargetRange.Add(scan.IsolationWindowUpperOffset + scan.IsolationWindowLowerOffset);
TICthisSwath += scan.TotalIonCurrent;
swDensity.Add(scan.Density);
TotalSwathProportionPredictedSingleCharge.Add(scan.ProportionChargeStateOne); //The chargestate one's we pick up is where there is a match for M+1. Therefore we need to double it to add the M.
track++;
}
averageMzTargetRange.Add(mzTargetRange.Average());
numOfSwathPerGroup.Add(track);
TICs.Add(TICthisSwath);
TICthisSwath = 0;
SwathProportionPredictedSingleChargeAvg.Add(TotalSwathProportionPredictedSingleCharge.Average());
TotalSwathProportionPredictedSingleCharge.Clear();
swDensity.Sort();
swDensity50.Add(Math.Truncate(Math.Ceiling(swDensity.Average())));
if (swDensity.Count > 4)
{
swDensityIQR.Add(Math.Ceiling(InterQuartileRangeCalculator.CalcIQR(swDensity)));
}
else
{
swDensityIQR.Add(default);
public RTMetrics DivideByRT(MzmlParser.Run run, int division, double rtDuration)
{
double rtSegment = rtDuration / division;
rtSegs = new double[division];
List <string> segmentBoundaries = new List <string>();
for (int i = 0; i < division; i++)
{
rtSegs[i] = run.StartTime + rtSegment * i;
if (i > 0)
{
segmentBoundaries.Add(rtSegs[i - 1] + "_" + rtSegs[i]);//segmentBoundaries is a string denoting the startOfTheRTsegment_endOfTheRTsegment for reference
}
else
{
segmentBoundaries.Add(run.StartTime + "_" + rtSegs[i]);
}
}
//dividing basepeaks into segments
foreach (MzmlParser.BasePeak basepeak in run.BasePeaks)
{
//Check to see in which RTsegment this basepeak is:
foreach (double rt in basepeak.BpkRTs)
{
if (rt > rtSegs.Last())
{
basepeak.RTsegments.Add(rtSegs.Count() - 1);
}
else if (rtSegs.Count() > 1 && rt < rtSegs[1])
{
basepeak.RTsegments.Add(0);
}
else
{
for (int segmentboundary = 2; segmentboundary < rtSegs.Count(); segmentboundary++)
{
if (rt > rtSegs[segmentboundary - 1] && rt < rtSegs[segmentboundary])
{
basepeak.RTsegments.Add(segmentboundary - 1);
segmentboundary = rtSegs.Count();//move to the next bpkRT
}
}
}
}
}
double experimentWideMS2TICSquared = 0;
//dividing ms2scans into segments of RT
foreach (MzmlParser.Scan scan in run.Ms2Scans)
{
//if the scan starttime falls into the rtsegment, give it the correct rtsegment number
//We assign to the segmentdivider below. So if >a and <b, it is assigned to segment a.
if (scan.ScanStartTime > rtSegs.Last())//If the scan is after the last segment divider, it falls into the last segment
{
scan.RTsegment = rtSegs.Count() - 1;
}
else if (rtSegs.Count() > 1 && scan.ScanStartTime < rtSegs[1])//If the scan is before the second segment divider it should fall in the first segment. (assuming that the user has selected to have more than one segment)
{
scan.RTsegment = 0;
}
else
{
for (int segmentboundary = 2; segmentboundary < rtSegs.Count(); segmentboundary++) //If the scan is not in the first or last segment
{
if (scan.ScanStartTime > rtSegs[segmentboundary - 1] && scan.ScanStartTime < rtSegs[segmentboundary]) // If the scan is larger than the previous boundary and smaller than this boundary, assign to the previous segment.
{
scan.RTsegment = segmentboundary - 1;
}
}
}
experimentWideMS2TICSquared += Math.Pow(scan.TotalIonCurrent, 2);
}
//dividing ms1scans into segments of RT
foreach (MzmlParser.Scan scan in run.Ms1Scans)
{
if (scan.ScanStartTime > rtSegs.Last())//If the scan is after the last segment divider, it falls into the last segment
{
scan.RTsegment = rtSegs.Count() - 1;
}
else if (rtSegs.Count() > 1 && scan.ScanStartTime < rtSegs[1])//If the scan is before the second segment divider it should fall in the first segment. (assuming that the user has selected to have more than one segment)
{
scan.RTsegment = 0;
}
else
{
for (int segmentboundary = 2; segmentboundary < rtSegs.Count(); segmentboundary++) //If the scan is not in the first or last segment
{
if (scan.ScanStartTime > rtSegs[segmentboundary - 1] && scan.ScanStartTime < rtSegs[segmentboundary]) // If the scan is larger than the previous boundary and smaller than this boundary, assign to the previous segment.
{
scan.RTsegment = segmentboundary - 1;
}
}
}
}
//Retrieve TICChange metrics and divide into rtsegs
List <double> ticChange50List = new List <double>();
List <double> ticChangeIqrList = new List <double>();
var tempTic = run.Ms2Scans.OrderBy(x => x.ScanStartTime).GroupBy(x => x.RTsegment).Select(d => d.Select(g => g.TotalIonCurrent).ToList());
double magnitude = Math.Pow(experimentWideMS2TICSquared, 0.5);
for (int i = 0; i < tempTic.Count(); i++)
{
var temp = tempTic.ElementAt(i);
List <double> tempList = new List <double>();
for (int j = 1; j < temp.Count(); j++)
{
tempList.Add(Math.Abs(temp.ElementAt(j) - temp.ElementAt(j - 1)) / magnitude);//Normalised to TIC magnitude.
}
tempList.Sort();
ticChange50List.Add(tempList.Average());
if (tempList.Count() > 4)
{
ticChangeIqrList.Add(InterQuartileRangeCalculator.CalcIQR(tempList));
}
else
{
logger.Error("There are only {0} MS2Scans in this segment, which is too few to calculate the IQR of the TIC Change. This value has been set to zero.", tempTic.Count());
ticChangeIqrList.Add(0);
}
}
//Calculations for peakprecision MS2:
var meanIntensityOfAllBpks = run.BasePeaks.Select(x => x.Intensities.Sum()).Average();
var meanMzOfAllBpks = run.BasePeaks.Select(x => x.Mz).Average();
//Calculations for peakprecision MS1:
//double mIMS1Bpks;
//if (run.Ms1Scans.Count()>0) mIMS1Bpks = run.Ms1Scans.Select(x => x.BasePeakIntensity).Average();
//var mMMS1Bpks = run.Ms1Scans.Select(x => x.BasePeakMz).Average();
List <double> peakWidths = new List <double>();
List <double> TailingFactor = new List <double>();
List <double> peakCapacity = new List <double>();
List <double> peakPrecision = new List <double>();
List <double> ms1PeakPrecision = new List <double>();
List <int> ms1Density = new List <int>();
List <int> ms2Density = new List <int>();
List <double> cycleTime = new List <double>();
List <double> ms1TicTotal = new List <double>();
List <double> Ms2TicTotal = new List <double>();
for (int segment = 0; segment < division; segment++)
{
List <double> peakWidthsTemp = new List <double>();
List <double> peakSymTemp = new List <double>();
List <double> fullWidthBaselinesTemp = new List <double>();
List <double> peakPrecisionTemp = new List <double>();
foreach (MzmlParser.BasePeak basepeak in run.BasePeaks)
{
for (int i = 0; i < basepeak.RTsegments.Count(); i++)
{
if (basepeak.RTsegments[i] == segment)
{
peakWidthsTemp.Add(basepeak.FWHMs[i]);
peakSymTemp.Add(basepeak.Peaksyms[i]);
peakPrecisionTemp.Add(basepeak.Intensities[i] / (meanIntensityOfAllBpks * Math.Pow(2, meanMzOfAllBpks / basepeak.Mz)));
fullWidthBaselinesTemp.Add(basepeak.FullWidthBaselines[i]);
}
}
}
List <double> firstScansOfCycle = new List <double>();
List <double> lastScansOfCycle = new List <double>();
List <double> difference = new List <double>();
double ms1TicTotalTemp = 0;
List <int> ms1DensityTemp = new List <int>();
List <double> ms1PeakPrecisionTemp = new List <double>();
foreach (MzmlParser.Scan scan in run.Ms1Scans.OrderBy(x => x.ScanStartTime))
{
if (scan.RTsegment == segment)
{
ms1PeakPrecisionTemp.Add(scan.BasePeakIntensity / (meanIntensityOfAllBpks * Math.Pow(2, meanMzOfAllBpks / scan.BasePeakMz)));
ms1DensityTemp.Add(scan.Density);
ms1TicTotalTemp += scan.TotalIonCurrent;
}
}
int minNumberMS1Or2 = 0;
//To get scan speed for both ms1 and ms2 we have to also scan through ms2:
if (run.Ms1Scans.Count() > 1)
{
lastScansOfCycle = run.Ms2Scans.Where(x => x.RTsegment == segment).GroupBy(g => g.Cycle).Select(x => x.Max(y => y.ScanStartTime)).ToList();
firstScansOfCycle = run.Ms1Scans.Where(x => x.RTsegment == segment).Select(y => y.ScanStartTime).ToList();
}
else
{
lastScansOfCycle = run.Ms2Scans.Where(x => x.RTsegment == segment).GroupBy(g => g.Cycle).Select(x => x.Max(y => y.ScanStartTime)).ToList();
firstScansOfCycle = run.Ms2Scans.Where(x => x.RTsegment == segment).GroupBy(g => g.Cycle).Select(x => x.Min(y => y.ScanStartTime)).ToList();
}
minNumberMS1Or2 = Math.Min(lastScansOfCycle.Count(), firstScansOfCycle.Count());
for (int i = 0; i < minNumberMS1Or2; i++)
{
difference.Add(lastScansOfCycle[i] - firstScansOfCycle[i]);
}
cycleTime.Add(difference.Average() * 60);
List <int> ms2DensityTemp = run.Ms2Scans.Where(x => x.RTsegment == segment).Select(x => x.Density).ToList();
double ms2TicTotalTemp = run.Ms2Scans.Where(x => x.RTsegment == segment).Select(x => x.TotalIonCurrent).Sum();
if (peakWidthsTemp.Count > 0)
{
peakWidths.Add(peakWidthsTemp.Average());
TailingFactor.Add(peakSymTemp.Average());
peakCapacity.Add(rtSegment / fullWidthBaselinesTemp.Average());//PeakCapacity is calculated as per Dolan et al.,2009, PubMed 10536823);
peakPrecision.Add(peakPrecisionTemp.Average());
}
else
{
peakWidths.Add(0);
TailingFactor.Add(0);
peakCapacity.Add(0);
peakPrecision.Add(0);
}
if (ms1PeakPrecisionTemp.Count > 0)
{
ms1PeakPrecision.Add(ms1PeakPrecisionTemp.Average());
ms1Density.Add(Convert.ToInt32(Math.Ceiling(ms1DensityTemp.Average())));
}
else
{
ms1PeakPrecision.Add(0);
ms1Density.Add(0);
}
ms2Density.Add(Convert.ToInt32(Math.Round(ms2DensityTemp.Average(), 0)));
ms1TicTotal.Add(ms1TicTotalTemp);
Ms2TicTotal.Add(ms2TicTotalTemp);
}
RTMetrics rtMetrics = new RTMetrics(ms1TicTotal, Ms2TicTotal, cycleTime, ticChange50List, ticChangeIqrList, ms1Density, ms2Density, peakWidths, TailingFactor, peakCapacity, peakPrecision, ms1PeakPrecision, segmentBoundaries);
return(rtMetrics);
}
public Dictionary <string, dynamic> GenerateMetrics(Run run, int division, string inputFilePath, bool irt, bool combine, bool lastFile, string date)
{
Run = run;
if (run.LastScanTime != 0 && run.StartTime != 1000000)
{
//Acquire RTDuration: last minus first
RTDuration = run.LastScanTime - run.StartTime;
}
else
{
Logger.Error("StartTime {0} or lastScanTime {0} for the run is null. RTDuration is therefore zero", run.StartTime, run.LastScanTime);
RTDuration = 0;
}
//Interpolate, Smooth, create chromatogram and generate chromatogram metrics
ChromatogramMetricGenerator chromatogramMetrics = new ChromatogramMetricGenerator();
chromatogramMetrics.GenerateChromatogram(run);
if (irt)
{
chromatogramMetrics.GenerateiRTChromatogram(run);
}
//Calculating the largestswath
if (run.Ms2Scans.Max(x => x.IsolationWindowUpperOffset) == 100000 || run.Ms2Scans.Max(x => x.IsolationWindowLowerOffset) == 100000)
{
Logger.Error(("IsolationWindowUpperOffset {0} or IsolationWindowLowerOffset {0} for the one of the scans has not been changed from default value. swathSizeDifference is therefore zero", run.Ms2Scans.Max(x => x.IsolationWindowUpperOffset), run.Ms2Scans.Max(x => x.IsolationWindowLowerOffset)));
swathSizeDifference = 0;
}
else
{
swathSizeDifference = run.Ms2Scans.Max(x => x.IsolationWindowUpperOffset + x.IsolationWindowLowerOffset) - run.Ms2Scans.Min(x => x.IsolationWindowUpperOffset + x.IsolationWindowLowerOffset);
}
// This method will group the scans into swaths of the same number, return the number of swaths in a full cycle (maxswath) and call a FileMaker method to write out the metrics.
SwathGrouper swathGrouper = new SwathGrouper {
};
SwathMetrics = swathGrouper.GroupBySwath(run);
//Retrieving Density metrics
Density = run.Ms2Scans.OrderBy(g => g.Density).Select(g => g.Density).ToList();
RTGrouper rtGrouper = new RTGrouper {
};
RtMetrics = rtGrouper.DivideByRT(run, division, RTDuration);
FileMaker fileMaker = new FileMaker(division, inputFilePath, run, SwathMetrics, RtMetrics, RTDuration, swathSizeDifference, run.Ms2Scans.Count(), Density.Sum(), Density.ElementAt(Density.Count() / 2), InterQuartileRangeCalculator.CalcIQR(Density), run.Ms1Scans.Count(), date);
fileMaker.MakeComprehensiveMetricsFile();
if (run.IRTPeaks != null && run.IRTPeaks.Count() > 0)
{
fileMaker.MakeiRTmetricsFile(run);
}
fileMaker.MakeMetricsPerRTsegmentFile(RtMetrics);
fileMaker.MakeMetricsPerSwathFile(SwathMetrics);
if (combine && lastFile)
{
if (run.IRTPeaks != null && run.IRTPeaks.Count() > 0)
{
string[] iRTFilename = { "AllIRTMetrics_", date, ".tsv" };
fileMaker.CombineMultipleFilesIntoSingleFile(date + "_iRTMetrics_*", string.Join("", iRTFilename));
}
string[] swathFilename = { "AllMetricsBySwath_", date, ".tsv" };
string[] rtFilename = { "AllRTDividedMetrics_", date, ".tsv" };
string[] ComprehensiveFilename = { "AllComprehensiveMetrics_", date, ".tsv" };
fileMaker.CheckOutputDirectory(inputFilePath);
fileMaker.CombineMultipleFilesIntoSingleFile(date + "_MetricsBySwath_*", string.Join("", swathFilename));
fileMaker.CombineMultipleFilesIntoSingleFile(date + "_RTDividedMetrics_*", string.Join("", rtFilename));
fileMaker.CombineMultipleFilesIntoSingleFile(date + "_ComprehensiveMetrics_*", string.Join("", ComprehensiveFilename));
}
return(AssembleMetrics());
}
public SwathMetrics GroupBySwath(MzmlParser.Run run)
{
//Create list of target isolationwindows to serve as swathnumber
List <double> swathTargets = new List <double>();
swathTargets = run.Ms2Scans.OrderBy(y => y.ScanStartTime).Select(x => x.IsolationWindowTargetMz).Distinct().ToList();
double totalTIC = 0;
foreach (var scan in run.Ms2Scans)
{
totalTIC += scan.TotalIonCurrent;
}
//Loop through every swath of a certain swathNumber:
List <int> numOfSwathPerGroup = new List <int>();
List <double> TICs = new List <double>();
List <double> swDensity = new List <double>();
List <double> swDensity50 = new List <double>();
List <double> swDensityIQR = new List <double>();
List <double> mzTargetRange = new List <double>();
List <double> averageMzTargetRange = new List <double>();
List <double> SwathProportionOfTotalTIC = new List <double>();
List <double> TotalSwathProportionPredictedSingleCharge = new List <double>();
List <double> SwathProportionPredictedSingleChargeAvg = new List <double>();
//Loop through all the swaths of the same number and add to
for (int swathNumber = 0; swathNumber < swathTargets.Count(); swathNumber++)
{
int track = 0;
double TICthisSwath = 0;
var orderedMS2Scans = run.Ms2Scans.OrderBy(s => s.ScanStartTime)
.Where(x => x.MsLevel == 2 && x.IsolationWindowTargetMz == swathTargets[swathNumber]);
foreach (var scan in orderedMS2Scans)
{
mzTargetRange.Add(scan.IsolationWindowUpperOffset + scan.IsolationWindowLowerOffset);
TICthisSwath = TICthisSwath + scan.TotalIonCurrent;
swDensity.Add(scan.Density);
TotalSwathProportionPredictedSingleCharge.Add(scan.ProportionChargeStateOne); //The chargestate one's we pick up is where there is a match for M+1. Therefore we need to double it to add the M.
track++;
}
averageMzTargetRange.Add(mzTargetRange.Average());
numOfSwathPerGroup.Add(track);
TICs.Add(TICthisSwath);
TICthisSwath = 0;
SwathProportionPredictedSingleChargeAvg.Add(TotalSwathProportionPredictedSingleCharge.Average());
TotalSwathProportionPredictedSingleCharge.Clear();
swDensity.Sort();
swDensity50.Add(Math.Truncate(Math.Ceiling(swDensity.Average())));
swDensityIQR.Add(Math.Truncate(Math.Ceiling(InterQuartileRangeCalculator.CalcIQR(swDensity))));
swDensity.Clear();
mzTargetRange.Clear();
}
for (int num = 0; num < swathTargets.Count(); num++)
{
SwathProportionOfTotalTIC.Add(TICs[num] / totalTIC);
}
SwathMetrics swathMetrics = new SwathMetrics(swathTargets, totalTIC, numOfSwathPerGroup, averageMzTargetRange, TICs, swDensity50, swDensityIQR, SwathProportionOfTotalTIC, SwathProportionPredictedSingleChargeAvg);
return(swathMetrics);
}