public int LoadEnable()
{
try
{
int functionReturnValue = 0;
swModel = SwApp.ActiveDoc;
try
{
if (swModel.GetType() != (int)swDocumentTypes_e.swDocDRAWING)
{
functionReturnValue = 0;
}
else
{
_swDraw = (DrawingDoc)swModel;
swSheet = _swDraw.GetCurrentSheet();
swView = _swDraw.GetFirstView();
functionReturnValue = 1;
}
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
swModel = swView.ReferencedDocument;
if (swModel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY)
{
functionReturnValue = 0;
}
}
catch
{
functionReturnValue = 0;
}
return(functionReturnValue);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
public void check()
{
int m = 0;
//swapp = CreateObject("SldWorks.Application")
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
// Проверка открытого документа
if (swmodel == null)
{
swapp.SendMsgToUser("Откройте чертеж");
return;
}
//Or swDocumentTypes_e.swDocASSEMBLY
if (swmodel.GetType() != (int)swDocumentTypes_e.swDocDRAWING)
{
swapp.SendMsgToUser("Откройте чертеж");
return;
}
if (string.IsNullOrEmpty(swmodel.GetPathName()))
{
swapp.SendMsgToUser("Сохраните чертеж!");
Close();
return;
}
swDraw = (DrawingDoc)swmodel;
// Получение первого листа
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
// Узнаем имя активного листа
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
//m = 0
//Debug.Print(swSheet.CustomPropertyView);
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
else
{
while (!(swView == null))
{
if (swView.GetName2() == swSheet.CustomPropertyView)
{
m = 1;
break;
}
swView = swView.GetNextView();
}
if (m == 0)
{
swView = swDraw.GetFirstView();
swView = swView.GetNextView();
swapp.SendMsgToUser("Не удалось определить вид из свойств листа. Ипользуется первый вид.");
}
}
if (swView == null)
{
swapp.SendMsgToUser("Отсутсвует модель!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
if (swView.ReferencedDocument == null)
{
swapp.SendMsgToUser("Отсутсвует модель!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
swmodel = swView.ReferencedDocument;
if (swmodel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY)
{
swapp.SendMsgToUser("Чертеж должен быть сборочным!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
}
public void LoadDataGridConfig()
{
try
{
//SelectionMgr swSelMgr;
//Configuration swConfig; ;
string sConfigName;
object[] vConfNameArr;
//swapp = CreateObject("SldWorks.Application")
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swDraw = (DrawingDoc)swmodel;
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
// Получаем параметры модели
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
sConfigName = swView.ReferencedConfiguration;
swmodel = swView.ReferencedDocument;
swmodel.GetConfigurationByName(sConfigName);
vConfNameArr = swmodel.GetConfigurationNames();
// Конфигурация
for (var i = 0; i <= vConfNameArr.GetUpperBound(0); i++)
{
DataGridConfig.Rows.Add(ColChB.Selected, vConfNameArr[i]);
}
//Get customProperty from Assy
CustomPropertyManager swCustProp = default(CustomPropertyManager);
string valOut = "";
string Number = "";
string Description = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valOut, out Number);
swCustProp.Get2("Наименование", out valOut, out Description);
addinform = new addincheckbox();
try
{
//Fill DataGriad
foreach (string line in System.IO.File.ReadAllLines("C:\\Program Files\\SW-Complex\\doc.txt"))
{
addinform.DGDoc.Rows.Add(addinform.DocChb.Selected, line);
}
}
catch (Exception ex)
{
//Interaction.MsgBox("Отсутствует SW-Complex или Doc.txt");
this.Close();
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public void GetXMLfromBOM()
{
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swModelDocExt = swmodel.Extension;
//создаем MemoryStream, в который будем писать XML
var myMemoryStream = new MemoryStream();
//создаем XmlTextWriter, указываем объект – myMemoryStream, в который будем писать XML, и кодировку
try
{
var myXml = new System.Xml.XmlTextWriter("C:\\Program Files\\SW-Complex\\SP-Temp.xml", System.Text.Encoding.UTF8);
swDraw = (DrawingDoc)swmodel;
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swView = swDraw.GetFirstView();
// Получаем параметры модели
swView = swView.GetNextView();
swmodel = swView.ReferencedDocument;
//swSelMgr = swDraw.SelectionManager;
myXml.WriteStartDocument();
myXml.Formatting = System.Xml.Formatting.Indented;
//длина отступа
myXml.Indentation = 2;
vConfName = swmodel.GetConfigurationNames();
swapp = new SldWorks();
swmodel = swapp.ActiveDoc;
Feature swFeat = swmodel.FirstFeature();
while ((swFeat != null))
{
if (swFeat.GetTypeName() == "BomFeat")
{
swFeat.Select(true);
swBomFeature = swFeat.GetSpecificFeature2();
}
swFeat = swFeat.GetNextFeature();
}
//////////////////////////////////////////////////////
//
// GetPropertyBomTableFromDrawDoc
//
//////////////////////////////////////////////////////
object vConfigurations = null;
object vVisibility = null;
bool bGetVisible = false;
long lNumRow = 0;
long lNumColumn = 0;
int lRow = 0;
TableAnnotation swTableAnnotation = default(TableAnnotation);
ModelDoc2 swDocument = default(ModelDoc2);
AssemblyDoc swAssembly = default(AssemblyDoc);
int lStartRow = 0;
string strItemNumber = "";
string strPartNumber = "";
string strDescription = "";
var strDocumentName = swBomFeature.GetReferencedModelName();
swDocument = swapp.GetOpenDocumentByName(strDocumentName);
swAssembly = (AssemblyDoc)swDocument;
//swBOMTableAnnotation = swBomFeature.GetTableAnnotations(0)
var swBomTableAnnotation = (BomTableAnnotation)swBomFeature.GetTableAnnotations()[0];
swTableAnnotation = (TableAnnotation)swBomTableAnnotation;
lNumRow = swTableAnnotation.RowCount;
lNumColumn = swTableAnnotation.ColumnCount;
lStartRow = 1;
//If (Not (swTableAnnotation.TitleVisible = False)) Then
if (swTableAnnotation.TitleVisible == false)
{
lStartRow = 2;
}
bGetVisible = false;
vConfigurations = swBomFeature.GetConfigurations(bGetVisible, vVisibility);
//swTableAnnotation = swTableAnnotation;
///////////////////////////////////////////////////////////////////
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
// get custom property
var valout = ""; //Обозначение
var valout1 = ""; //Наименование
CustomPropertyManager swCustProp = default(CustomPropertyManager);
var resolvedValOut = "";
var resolvedValOut1 = "";
//string resolvedValOut3 = "";
//string resolvedValOut4 = "";
//string resolvedValOut5 = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valout, out resolvedValOut);
swCustProp.Get2("Description", out valout1, out resolvedValOut1);
// переменные для колонок
int Jj = 0; // наименование
int aa = 0; // раздел
int oo = 0; // обозначение
int tt = 0; // формат
int yy = 0; //
int uu = 0; // Код материала
int ss = 0; // Примечание
string sRowStr = null; // наименовани
string sRowStr1 = null; // раздел
string sRowStr2 = null; // обозначение
string sRowStr3 = null; // формат
string sRowStr4 = null; // ERP code
string sRowStr5 = null; // Код материала
string sRowStr6 = null; // Примечание
// При выборе электромонтажа
string Complect = "";
if (addinform.ChkElectro1.Checked)
{
Complect = "МЭ";
}
else if (addinform.ChkElectro2.Checked)
{
Complect = "ТБ";
}
////////////////////////////////////////////////////////////
//
// XML
//
////////////////////////////////////////////////////////////
//создаем элементы
myXml.WriteStartElement("xml");
//
myXml.WriteStartElement("Item");
// имя пути основного чертежа
myXml.WriteStartElement("PathName");
//записываем строку
myXml.WriteString(swmodel.GetPathName());
myXml.WriteEndElement();
// Устанавливаем ДОК из формы добавление
myXml.WriteStartElement("doc");
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + "CБ");
myXml.WriteEndElement();
//
myXml.WriteStartElement("Наименование");
myXml.WriteString("Сборочный чертеж");
myXml.WriteEndElement();
//
myXml.WriteEndElement(); //doc
//dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast<DataGridViewRow>()where Convert.ToBoolean(Rows.Cells(0).Value) == true).ToList;
dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows2)
{
sb.AppendLine(row.Cells[1].Value.ToString());
sb.ToString();
//Оставляем первые две буквы для обозначения разделитель
var literal = row.Cells[1].Value.ToString();
var substring = literal.Substring(0, 2);
var literal2 = row.Cells[1].Value.ToString();
var substring2 = literal2.Substring(5);
myXml.WriteStartElement("doc");
///
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + substring);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(substring2);
myXml.WriteEndElement();
///
myXml.WriteEndElement();
//doc
}
//<------------- Elec
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == false & addinform.ChkElectro2.Checked == false)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают при электромонтаже");
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro1
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro2
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro2.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(resolvedValOut1);
myXml.WriteEndElement();
//\reference
myXml.WriteStartElement("references");
// ВЫГРУЖАЕМ ВЫБРАННЫЕ КОНФИГУРАЦИИ
dynamic CheckedRows = (from Rows in DataGridConfig.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb2 = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows)
{
sb2.AppendLine(row.Cells[1].Value.ToString());
swmodel = swView.ReferencedDocument;
var configuration = swView.ReferencedConfiguration;
var sConfigName = swView.ReferencedConfiguration;
Configuration swConfig = swmodel.GetConfigurationByName(sConfigName);
for (var i = 0; i <= vConfName.GetUpperBound(0); i++)
{
const string ucase = "";
if (vConfName[i] == row.Cells[1].Value.ToString())
{
configuration = vConfName[i];
}
}
swView.ReferencedConfiguration = sConfigName;
myXml.WriteStartElement("config");
myXml.WriteAttributeString("value", row.Cells[1].Value.ToString());
/////////////////////////////////////////////////////////////
//
// PART
//
/////////////////////////////////////////////////////////////
for (lRow = lStartRow; lRow <= (lNumRow - 1); lRow++)
{
if (swBomTableAnnotation.GetComponentsCount2((int)lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber) > 0)
{
myXml.WriteStartElement("part");
//PathNameComponent
string strModelPathName = null;
var vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
if (((vModelPathNames != null)))
{
myXml.WriteStartElement("PathNameComponent");
foreach (var vModelPathName_loopVariable in vModelPathNames)
{
var vModelPathName = vModelPathName_loopVariable;
strModelPathName = vModelPathName;
myXml.WriteString(strModelPathName);
}
myXml.WriteEndElement();
}
//'\ Row
myXml.WriteStartElement("Row");
myXml.WriteString(Convert.ToString(lRow - lStartRow + 1));
myXml.WriteEndElement();
vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
//\ ItemNum
myXml.WriteStartElement("ItemNum");
myXml.WriteString(strItemNumber);
myXml.WriteEndElement();
//\ раздел
aa = 3;
/// раздел
sRowStr1 = "";
sRowStr1 = sRowStr1 + swTableAnnotation.Text[lRow, aa];
myXml.WriteStartElement("Раздел");
myXml.WriteString(sRowStr1);
myXml.WriteEndElement();
//\ обозначение
oo = 1;
/// обозначение
sRowStr2 = "";
sRowStr2 = sRowStr2 + swTableAnnotation.Text[lRow, oo];
myXml.WriteStartElement("Обозначение");
myXml.WriteString(sRowStr2);
myXml.WriteEndElement();
//\ наименование
Jj = 2;
/// наименование
sRowStr = "";
sRowStr = sRowStr + swTableAnnotation.Text[lRow, Jj];
myXml.WriteStartElement("Наименование");
myXml.WriteString(sRowStr);
myXml.WriteEndElement();
//\
tt = 4;
/// формат
sRowStr3 = "";
sRowStr3 = sRowStr3 + swTableAnnotation.Text[lRow, tt];
myXml.WriteStartElement("Формат");
myXml.WriteString(sRowStr3);
myXml.WriteEndElement();
//\
yy = 5;
/// ERP code
sRowStr4 = "";
sRowStr4 = sRowStr4 + swTableAnnotation.Text[lRow, yy];
myXml.WriteStartElement("ERP_code");
myXml.WriteString(sRowStr4);
myXml.WriteEndElement();
//\
uu = 6;
/// Код материала
sRowStr5 = "";
sRowStr5 = sRowStr5 + swTableAnnotation.Text[lRow, uu];
myXml.WriteStartElement("Код_материала");
myXml.WriteString(sRowStr5);
myXml.WriteEndElement();
//\
ss = 7;
/// наименование
sRowStr6 = "";
sRowStr6 = sRowStr6 + swTableAnnotation.Text[lRow, ss];
myXml.WriteStartElement("Примечание");
myXml.WriteString(sRowStr6);
myXml.WriteEndElement();
//\
myXml.WriteStartElement("Количество");
//myXml.WriteString(swTableAnnotation.GetComponentsCount2(lRow, strConfiguration, strItemNumber, strPartNumber))
myXml.WriteString(Convert.ToString(swBomTableAnnotation.GetComponentsCount2(lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber)));
myXml.WriteEndElement();
myXml.WriteEndElement();
//config
}
}
myXml.WriteEndElement(); //part
}
myXml.WriteEndElement(); //references
//<~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get the Total Number of Rows
Annotation swAnn = default(Annotation);
TableAnnotation swTable = default(TableAnnotation);
long nNumRow = 0;
swmodel = swapp.ActiveDoc;
swView = swDraw.GetFirstView();
swTable = swView.GetFirstTableAnnotation();
swAnn = swTable.GetAnnotation();
nNumRow = swTable.RowCount;
myXml.WriteStartElement("TotalRows");
myXml.WriteString(Convert.ToString(nNumRow));
myXml.WriteEndElement();
//end TotalRows
myXml.WriteEndElement();
//Item
myXml.WriteEndElement();
//элемент XML
//End If
//заносим данные в myMemoryStream
myXml.Flush();
myXml.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
/// <summary>
/// 生成零件号
/// </summary>
private void CreatePartNumber()
{
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.ActiveDoc;
if (swModel == null)
{
return;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
if (swDraw == null)
{
return;
}
//序号为零件属性，还是项目号, 还是文字
int iTextContent = -1;
string strText = "";
if (this.rdoTemp1.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextItemNumber;
strText = "";
}
else if (this.rdoTemp2.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextCustomProperties;
strText = Interop.Office.Core.Properties.Settings.Default.CreateNbr_PPtName; //"序号";
}
else if (this.rdoTemp3.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextCustom;
strText = "0";
}
else if (this.rdoTemp4.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextQuantity;
strText = "0";
}
//以正方形分布
int iLayout = (int)swBalloonLayoutType_e.swDetailingBalloonLayout_Square;
//下划线
int iStyle = (int)swBalloonStyle_e.swBS_Underline;
//下划线长度
int iSize = (int)swBalloonFit_e.swBF_Tightest;
//如果用户没有选中一个视图，就选中所有的视图
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.ActiveDrawingView;
if (swView == null)//对所有的视图进行重排序
{
swModel.ClearSelection2(true);
swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
while (swView != null)
{
swModel.Extension.SelectByID2(swView.Name, "DRAWINGVIEW", 0, 0, 0, true, 0, null, 0);
swView = (SolidWorks.Interop.sldworks.View)swView.GetNextView();
}
}
//自动添加序号
swDraw.AutoBalloon3(iLayout, true, iStyle, iSize, iTextContent, strText, iTextContent, strText, "");
//Notes = Part.AutoBalloon3(1, True, 10, 2, 1, "", 2, "", "-无-")
//swDraw.AutoBalloon3(iLayout, true, iStyle, -1, iTextContent, "xh", iTextContent, "xh", "");
//swDraw.AutoBalloon3(1, true, 10, 2, 1, "", 2, "", "-无-");
//.AutoBalloon3(1, True, 10, 2, 1, "", 2, "", "-无-")
////SolidWorks2006
//swDraw.AutoBalloon2((int)swBalloonLayoutType_e.swDetailingBalloonLayout_Top, true);
}
/// <summary>
/// 如果有一个视图为选中状态,则对这个视图进行重排序,
/// 否则,对一个图纸下的所有视图进行重排序
/// </summary>
private void ReSortAllView()
{
this.arCheckRepect.Clear();
if (this.rdoTemp1.Checked)
{
if (StringOperate.Alert("序号为项目号时，无法重排序，要继续吗？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) != DialogResult.Yes)
{
return;
}
}
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.ActiveDoc;
if (swModel == null)
{
return;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
SelectionMgr SelMgr = (SelectionMgr)swModel.SelectionManager;
swModel.ClearSelection2(true);
//101，$数量×"序号"，$数量×"属性名"
string strTxt = this.cmbStartIndex.Text;
int abc = 1;
bool bText = false;
try
{
abc = Convert.ToInt16(this.cmbStartIndex.Text);//序号从一开始
}
catch
{
bText = true;
}
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.ActiveDrawingView;
if (swView == null)//对所有的视图进行重排序
{
swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
//遍历视图
while (swView != null)
{
swDraw.ActivateView(swView.Name);
if (bText)
{
SaidiResortOneView(swView, swModel);//对这个视图进行排序
}
else
{
abc = ReSortOneView(abc, swView, swModel);//对这个视图进行排序
}
//转到下一个视图
swView = (SolidWorks.Interop.sldworks.View)swView.GetNextView();
}
}
else//只对当前视图进行重排序
{
if (bText)
{
SaidiResortOneView(swView, swModel);//对这个视图进行排序
}
else
{
ReSortOneView(abc, swView, swModel);
}
}
//重建,以更新明细表
swModel.EditRebuild3();
this.arCheckRepect.Clear();
}
public void SaveDrawingV2()
{
//This callback is for a utility to save an un-saved drawing of a part with a BPA part number into the correct Vault directory with the correct file name.
DrawingDoc swDraw = iSwApp.ActiveDoc;
SolidWorks.Interop.sldworks.View swView = swDraw.IGetFirstView();
swView = swView.GetNextView();
ModelDoc2 swDrawModel = swView.ReferencedDocument;
int errors = 0;
int warnings = 0;
String configName = swView.ReferencedConfiguration;
String drawingNumber = swDrawModel.GetCustomInfoValue(configName, "Drawing Number");
//MessageBox.Show("The drawing number is: " + drawingNumber);
if (drawingNumber == "" || drawingNumber == " ")
{
MessageBox.Show("Please fill out the drawing number field on the model's file data card before proceeding.", "Missing Drawing Number", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
}
String modelPath = swDrawModel.GetPathName().ToString();
MessageBox.Show("The model's path is: " + modelPath);
if (modelPath == "" || modelPath == " ")
{
MessageBox.Show("Please save the model before proceeding", "Save the Model", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
}
swDrawModel = iSwApp.ActiveDoc;
String swDrawPath = swDrawModel.GetPathName().ToString();
//MessageBox.Show("The drawing path is: " + swDrawPath);
if (swDrawPath != "")
{
MessageBox.Show("The drawing has already been saved as '" + swDrawPath + "' in the Vault.", "Drawng Saved", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
else
{
string[] pathDir = modelPath.Split('\\');
int pathDirLength = pathDir.Length;
string path = pathDir[0] + "\\" + pathDir[1] + "\\" + pathDir[2] + "\\" + pathDir[3] + "\\" + pathDir[4] + "\\";
string dwgPath = path + drawingNumber + ".SLDDRW";
string dialogText = "The drawing path is: \n" + dwgPath + "\nContinue?";
DialogResult result = MessageBox.Show(dialogText, "Save Drawing?", MessageBoxButtons.OKCancel, MessageBoxIcon.Question, MessageBoxDefaultButton.Button1);
if (result == DialogResult.OK)
{
ModelDoc2 Model = SwApp.ActiveDoc;
Boolean Save;
Save = Model.SaveAs4(dwgPath, 0, 1, errors, warnings);
}
}
//ModelDocExtension swModExt = default(ModelDocExtension);
//Return the filepath of the referenced model in the parent view in the active drawing document.
//string swModel = swView.GetReferencedModelName();
}
