public Coordinate Transform(Coordinate c)
{
var x = Matrix[0] * c.X + Matrix[1] * c.Y + Matrix[2] * c.Z + Matrix[3];
var y = Matrix[4] * c.X + Matrix[5] * c.Y + Matrix[6] * c.Z + Matrix[7];
var z = Matrix[8] * c.X + Matrix[9] * c.Y + Matrix[10] * c.Z + Matrix[11];
return new Coordinate(x, y, z);
}
public IEnumerable<MapObject> Create(IDGenerator generator, Box box, ITexture texture, int roundDecimals)
{
var numSides = (int)_numSides.GetValue();
if (numSides < 3) yield break;
var width = box.Width;
var length = box.Length;
var height = box.Height;
var major = width / 2;
var minor = length / 2;
var heightRadius = height / 2;
var angleV = DMath.DegreesToRadians(180) / numSides;
var angleH = DMath.DegreesToRadians(360) / numSides;
var faces = new List<Coordinate[]>();
var bottom = new Coordinate(box.Center.X, box.Center.Y, box.Start.Z).Round(roundDecimals);
var top = new Coordinate(box.Center.X, box.Center.Y, box.End.Z).Round(roundDecimals);
for (var i = 0; i < numSides; i++)
{
// Top -> bottom
var zAngleStart = angleV * i;
var zAngleEnd = angleV * (i + 1);
var zStart = heightRadius * DMath.Cos(zAngleStart);
var zEnd = heightRadius * DMath.Cos(zAngleEnd);
var zMultStart = DMath.Sin(zAngleStart);
var zMultEnd = DMath.Sin(zAngleEnd);
for (var j = 0; j < numSides; j++)
{
// Go around the circle in X/Y
var xyAngleStart = angleH * j;
var xyAngleEnd = angleH * ((j + 1) % numSides);
var xyStartX = major * DMath.Cos(xyAngleStart);
var xyStartY = minor * DMath.Sin(xyAngleStart);
var xyEndX = major * DMath.Cos(xyAngleEnd);
var xyEndY = minor * DMath.Sin(xyAngleEnd);
var one = (new Coordinate(xyStartX * zMultStart, xyStartY * zMultStart, zStart) + box.Center).Round(roundDecimals);
var two = (new Coordinate(xyEndX * zMultStart, xyEndY * zMultStart, zStart) + box.Center).Round(roundDecimals);
var three = (new Coordinate(xyEndX * zMultEnd, xyEndY * zMultEnd, zEnd) + box.Center).Round(roundDecimals);
var four = (new Coordinate(xyStartX * zMultEnd, xyStartY * zMultEnd, zEnd) + box.Center).Round(roundDecimals);
if (i == 0)
{
// Top faces are triangles
faces.Add(new[] { top, three, four });
}
else if (i == numSides - 1)
{
// Bottom faces are also triangles
faces.Add(new[] { bottom, one, two });
}
else
{
// Inner faces are quads
faces.Add(new[] { one, two, three, four });
}
}
}
yield return MakeSolid(generator, faces, texture, Colour.GetRandomBrushColour());
}
public override void DragMove(Coordinate distance)
{
if (_state == VMState.None) return;
_state = VMState.Moving;
// Move the origin point by the delta value
_origin.Move(distance);
}
public IEnumerable<MapObject> Create(IDGenerator generator, Box box, ITexture texture)
{
var solid = new Solid(generator.GetNextObjectID()) { Colour = Colour.GetRandomBrushColour() };
// The lower Z plane will be base, the x planes will be triangles
var c1 = new Coordinate(box.Start.X, box.Start.Y, box.Start.Z);
var c2 = new Coordinate(box.End.X, box.Start.Y, box.Start.Z);
var c3 = new Coordinate(box.End.X, box.End.Y, box.Start.Z);
var c4 = new Coordinate(box.Start.X, box.End.Y, box.Start.Z);
var c5 = new Coordinate(box.Center.X, box.Start.Y, box.End.Z);
var c6 = new Coordinate(box.Center.X, box.End.Y, box.End.Z);
var faces = new[]
{
new[] { c1, c2, c3, c4 },
new[] { c2, c1, c5 },
new[] { c5, c6, c3, c2 },
new[] { c4, c3, c6 },
new[] { c6, c5, c1, c4 }
};
foreach (var arr in faces)
{
var face = new Face(generator.GetNextFaceID())
{
Parent = solid,
Plane = new Plane(arr[0], arr[1], arr[2]),
Colour = solid.Colour,
Texture = { Texture = texture }
};
face.Vertices.AddRange(arr.Select(x => new Vertex(x, face)));
face.UpdateBoundingBox();
face.AlignTextureToFace();
solid.Faces.Add(face);
}
solid.UpdateBoundingBox();
yield return solid;
}
public IEnumerable<MapObject> Create(IDGenerator generator, Box box, ITexture texture, int roundDecimals)
{
var solid = new Solid(generator.GetNextObjectID()) { Colour = Colour.GetRandomBrushColour() };
// The higher Z plane will be triangle, with the lower X value getting the two corners
var c1 = new Coordinate(box.Start.X, box.Start.Y, box.End.Z).Round(roundDecimals);
var c2 = new Coordinate(box.End.X, box.Start.Y, box.End.Z).Round(roundDecimals);
var c3 = new Coordinate(box.Center.X, box.End.Y, box.End.Z).Round(roundDecimals);
var c4 = new Coordinate(box.Center.X, box.Center.Y, box.Start.Z).Round(roundDecimals);
var faces = new[]
{
new[] { c3, c2, c1 },
new[] { c3, c1, c4 },
new[] { c2, c3, c4 },
new[] { c1, c2, c4 }
};
foreach (var arr in faces)
{
var face = new Face(generator.GetNextFaceID())
{
Parent = solid,
Plane = new Plane(arr[0], arr[1], arr[2]),
Colour = solid.Colour,
Texture = { Texture = texture }
};
face.Vertices.AddRange(arr.Select(x => new Vertex(x, face)));
face.UpdateBoundingBox();
face.AlignTextureToFace();
solid.Faces.Add(face);
}
solid.UpdateBoundingBox();
yield return solid;
}
public void Move(Coordinate delta)
{
Coordinate += delta;
if (!IsMidPoint)
{
Vertices.ForEach(x => x.Location += delta);
}
}
public IEnumerable<MapObject> Create(IDGenerator generator, Box box, ITexture texture, int roundDecimals)
{
var numsides = (int) _numSides.GetValue();
if (numsides < 3) yield break;
// Cylinders can be elliptical so use both major and minor rather than just the radius
// NOTE: when a low number (< 10ish) of faces are selected this will cause the cylinder to not touch all the edges of the box.
var width = box.Width;
var length = box.Length;
var height = box.Height;
var major = width / 2;
var minor = length / 2;
var angle = 2 * DMath.PI / numsides;
// Calculate the X and Y points for the ellipse
var points = new Coordinate[numsides];
for (var i = 0; i < numsides; i++)
{
var a = i * angle;
var xval = box.Center.X + major * DMath.Cos(a);
var yval = box.Center.Y + minor * DMath.Sin(a);
var zval = box.Start.Z;
points[i] = new Coordinate(xval, yval, zval).Round(roundDecimals);
}
var faces = new List<Coordinate[]>();
// Add the vertical faces
var z = new Coordinate(0, 0, height).Round(roundDecimals);
for (var i = 0; i < numsides; i++)
{
var next = (i + 1) % numsides;
faces.Add(new[] {points[i], points[i] + z, points[next] + z, points[next]});
}
// Add the elliptical top and bottom faces
faces.Add(points.ToArray());
faces.Add(points.Select(x => x + z).Reverse().ToArray());
// Nothing new here, move along
var solid = new Solid(generator.GetNextObjectID()) { Colour = Colour.GetRandomBrushColour() };
foreach (var arr in faces)
{
var face = new Face(generator.GetNextFaceID())
{
Parent = solid,
Plane = new Plane(arr[0], arr[1], arr[2]),
Colour = solid.Colour,
Texture = { Texture = texture }
};
face.Vertices.AddRange(arr.Select(x => new Vertex(x, face)));
face.UpdateBoundingBox();
face.AlignTextureToFace();
solid.Faces.Add(face);
}
solid.UpdateBoundingBox();
yield return solid;
}
public TextureReference()
{
Name = "";
Texture = null;
Rotation = 0;
_uAxis = -Coordinate.UnitZ;
_vAxis = Coordinate.UnitX;
XShift = YShift = 0;
XScale = YScale = 1;
}
public override void DragMove(Coordinate distance)
{
_state = VMState.Moving;
// Move each selected point by the delta value
foreach (var p in MainTool.GetSelectedPoints())
{
p.Move(distance);
}
//MainTool.SetDirty(false, false);
}
public IEnumerable<MapObject> Create(IDGenerator generator, Box box, ITexture texture)
{
var numsides = (int) _numSides.GetValue();
if (numsides < 3) yield break;
// This is all very similar to the cylinder brush.
var width = box.Width;
var length = box.Length;
var major = width / 2;
var minor = length / 2;
var angle = 2 * DMath.PI / numsides;
var points = new Coordinate[numsides];
for (var i = 0; i < numsides; i++)
{
var a = i * angle;
var xval = box.Center.X + major * DMath.Cos(a);
var yval = box.Center.Y + minor * DMath.Sin(a);
var zval = box.Start.Z;
points[i] = new Coordinate(xval, yval, zval).Round(0);
}
var faces = new List<Coordinate[]>();
var point = new Coordinate(box.Center.X, box.Center.Y, box.End.Z);
for (var i = 0; i < numsides; i++)
{
var next = (i + 1) % numsides;
faces.Add(new[] {points[i], point, points[next]});
}
faces.Add(points.ToArray());
var solid = new Solid(generator.GetNextObjectID()) { Colour = Colour.GetRandomBrushColour() };
foreach (var arr in faces)
{
var face = new Face(generator.GetNextFaceID())
{
Parent = solid,
Plane = new Plane(arr[0], arr[1], arr[2]),
Colour = solid.Colour,
Texture = { Texture = texture }
};
face.Vertices.AddRange(arr.Select(x => new Vertex(x, face)));
face.UpdateBoundingBox();
face.AlignTextureToFace();
solid.Faces.Add(face);
}
solid.UpdateBoundingBox();
yield return solid;
}
/// <summary>
/// Project the 2D coordinates from the screen coordinates outwards
/// from the camera along the lookat vector, taking the frustrum
/// into account. The resulting line will be run from the camera
/// position along the view axis and end at the back clipping pane.
/// </summary>
/// <param name="x">The X coordinate on screen</param>
/// <param name="y">The Y coordinate on screen</param>
/// <returns>A line beginning at the camera location and tracing
/// along the 3D projection for at least 1,000,000 units.</returns>
public Line CastRayFromScreen(int x, int y)
{
var near = new Coordinate(x, Height - y, 0);
var far = new Coordinate(x, Height - y, 1);
var pm = Matrix4d.CreatePerspectiveFieldOfView(MathHelper.DegreesToRadians(60), Width / (float)Height, 0.1f, 50000);
var vm = Matrix4d.LookAt(
new Vector3d(Camera.Location.X, Camera.Location.Y, Camera.Location.Z),
new Vector3d(Camera.LookAt.X, Camera.LookAt.Y, Camera.LookAt.Z),
Vector3d.UnitZ);
var viewport = new[] { 0, 0, Width, Height };
var un = MathFunctions.Unproject(near, viewport, pm, vm);
var uf = MathFunctions.Unproject(far, viewport, pm, vm);
return (un == null || uf == null) ? null : new Line(un, uf);
}
public IEnumerable<MapObject> Create(IDGenerator generator, Box box, ITexture texture)
{
var wallWidth = (int) _width.GetValue();
if (wallWidth < 1) yield break;
var numsides = (int) _numSides.GetValue();
if (numsides < 3) yield break;
// Very similar to the cylinder, except we have multiple solids this time
var width = box.Width;
var length = box.Length;
var height = box.Height;
var majorOut = width / 2;
var majorIn = majorOut - wallWidth;
var minorOut = length / 2;
var minorIn = minorOut - wallWidth;
var angle = 2 * DMath.PI / numsides;
var colour = Colour.GetRandomBrushColour();
// Calculate the X and Y points for the inner and outer ellipses
var outer = new Coordinate[numsides];
var inner = new Coordinate[numsides];
for (var i = 0; i < numsides; i++)
{
var a = i * angle;
var xval = box.Center.X + majorOut * DMath.Cos(a);
var yval = box.Center.Y + minorOut * DMath.Sin(a);
var zval = box.Start.Z;
outer[i] = new Coordinate(xval, yval, zval).Round(0);
xval = box.Center.X + majorIn * DMath.Cos(a);
yval = box.Center.Y + minorIn * DMath.Sin(a);
inner[i] = new Coordinate(xval, yval, zval).Round(0);
}
// Create the solids
var z = new Coordinate(0, 0, height);
for (var i = 0; i < numsides; i++)
{
var faces = new List<Coordinate[]>();
var next = (i + 1) % numsides;
faces.Add(new[] { outer[i], outer[i] + z, outer[next] + z, outer[next] });
faces.Add(new[] { inner[next], inner[next] + z, inner[i] + z, inner[i] });
faces.Add(new[] { outer[next], outer[next] + z, inner[next] + z, inner[next] });
faces.Add(new[] { inner[i], inner[i] + z, outer[i] + z, outer[i] });
faces.Add(new[] { inner[next] + z, outer[next] + z, outer[i] + z, inner[i] + z });
faces.Add(new[] { inner[i], outer[i], outer[next], inner[next] });
yield return MakeSolid(generator, faces, texture, colour);
}
}
public Coordinate ClosestPoint(Coordinate point)
{
// http://paulbourke.net/geometry/pointline/
var delta = End - Start;
var den = delta.LengthSquared();
if (den == 0) return Start; // Start and End are the same
var numPoint = (point - Start).ComponentMultiply(delta);
var num = numPoint.X + numPoint.Y + numPoint.Z;
var u = num / den;
if (u < 0) return Start; // Point is before the segment start
if (u > 1) return End; // Point is after the segment end
return Start + u * delta;
}
public override Matrix4? GetTransformationMatrix(Viewport2D viewport, ViewportEvent e, BaseBoxTool.BoxState state, Document doc)
{
var shearUpDown = state.Handle == BaseBoxTool.ResizeHandle.Left || state.Handle == BaseBoxTool.ResizeHandle.Right;
var shearTopRight = state.Handle == BaseBoxTool.ResizeHandle.Top || state.Handle == BaseBoxTool.ResizeHandle.Right;
var nsmd = viewport.ScreenToWorld(e.X, viewport.Height - e.Y) - state.MoveStart;
var mouseDiff = SnapIfNeeded(nsmd, doc);
if (KeyboardState.Shift)
{
mouseDiff = doc.Snap(nsmd, doc.Map.GridSpacing / 2);
}
var relative = viewport.Flatten(state.PreTransformBoxEnd - state.PreTransformBoxStart);
var shearOrigin = (shearTopRight) ? state.PreTransformBoxStart : state.PreTransformBoxEnd;
var shearAmount = new Coordinate(mouseDiff.X / relative.Y, mouseDiff.Y / relative.X, 0);
if (!shearTopRight) shearAmount *= -1;
var shearMatrix = Matrix4.Identity;
var sax = (float)shearAmount.X;
var say = (float)shearAmount.Y;
switch (viewport.Direction)
{
case Viewport2D.ViewDirection.Top:
if (shearUpDown) shearMatrix.M12 = say;
else shearMatrix.M21 = sax;
break;
case Viewport2D.ViewDirection.Front:
if (shearUpDown) shearMatrix.M23 = say;
else shearMatrix.M32 = sax;
break;
case Viewport2D.ViewDirection.Side:
if (shearUpDown) shearMatrix.M13 = say;
else shearMatrix.M31 = sax;
break;
}
var stran = Matrix4.CreateTranslation((float)-shearOrigin.X, (float)-shearOrigin.Y, (float)-shearOrigin.Z);
var shear = Matrix4.Mult(stran, shearMatrix);
return Matrix4.Mult(shear, Matrix4.Invert(stran));
}
/**
* http://paulbourke.net/geometry/rotate/
*/
public Coordinate Transform(Coordinate c)
{
var p = c - Axis.Start;
var r = (Axis.End - Axis.Start).Normalise();
var costheta = DMath.Cos(Rotation);
var sintheta = DMath.Sin(Rotation);
decimal x = 0, y = 0, z = 0;
x += (costheta + (1 - costheta) * r.X * r.X) * p.X;
x += ((1 - costheta) * r.X * r.Y - r.Z * sintheta) * p.Y;
x += ((1 - costheta) * r.X * r.Z + r.Y * sintheta) * p.Z;
y += ((1 - costheta) * r.X * r.Y + r.Z * sintheta) * p.X;
y += (costheta + (1 - costheta) * r.Y * r.Y) * p.Y;
y += ((1 - costheta) * r.Y * r.Z - r.X * sintheta) * p.Z;
z += ((1 - costheta) * r.X * r.Z - r.Y * sintheta) * p.X;
z += ((1 - costheta) * r.Y * r.Z + r.X * sintheta) * p.Y;
z += (costheta + (1 - costheta) * r.Z * r.Z) * p.Z;
return new Coordinate(x, y, z) + Axis.Start;
}
public override void MouseUp(ViewportBase viewport, ViewportEvent e)
{
base.MouseUp(viewport, e);
if (_currentTool == null) return;
_currentTool.MouseUp(viewport, e);
if (!(viewport is Viewport2D)) return;
if (_currentTool.NoSelection()) return;
if (!e.Handled)
{
if (MoveSelection != null && !KeyboardState.Ctrl)
{
// If we were clicking on a point, and the mouse hasn't moved yet,
// and ctrl is not down, deselect the other points.
Points.ForEach(x => x.IsSelected = false);
MoveSelection.ForEach(x => x.IsSelected = true);
VertexSelectionChanged();
_currentTool.MouseClick(viewport, e);
}
else
{
_currentTool.DragEnd();
}
}
RefreshMidpoints();
_snapPointOffset = null;
_movingPoint = null;
MoveSelection = null;
}
/// <summary>
/// Convert a world space coordinate into a screen space coordinate.
/// </summary>
/// <param name="world">The world coordinate</param>
/// <returns>The screen coordinate</returns>
public Coordinate WorldToScreen(Coordinate world)
{
var viewport = new[] { 0, 0, Width, Height };
var pm = Matrix4d.CreatePerspectiveFieldOfView(MathHelper.DegreesToRadians(60), Width / (float)Height, 0.1f, 50000);
var vm = Matrix4d.LookAt(
new Vector3d(Camera.Location.X, Camera.Location.Y, Camera.Location.Z),
new Vector3d(Camera.LookAt.X, Camera.LookAt.Y, Camera.LookAt.Z),
Vector3d.UnitZ);
return MathFunctions.Project(world, viewport, pm, vm);
}
public Entity(long id)
: base(id)
{
Origin = new Coordinate(0, 0, 0);
EntityData = new EntityData();
}
public override void UpdateBoundingBox(bool cascadeToParent = true)
{
if (GameData == null && !Children.Any())
{
var sub = new Coordinate(-16, -16, -16);
var add = new Coordinate(16, 16, 16);
BoundingBox = new Box(Origin + sub, Origin + add);
}
else if (MetaData.Has<Box>("BoundingBox"))
{
var angles = EntityData.GetPropertyCoordinate("angles", Coordinate.Zero);
angles = new Coordinate(-DMath.DegreesToRadians(angles.Z), DMath.DegreesToRadians(angles.X), -DMath.DegreesToRadians(angles.Y));
var tform = Matrix.Rotation(Quaternion.EulerAngles(angles)).Translate(Origin);
if (MetaData.Has<bool>("RotateBoundingBox") && !MetaData.Get<bool>("RotateBoundingBox")) tform = Matrix.Translation(Origin);
BoundingBox = MetaData.Get<Box>("BoundingBox").Transform(new UnitMatrixMult(tform));
}
else if (GameData != null && GameData.ClassType == ClassType.Point)
{
var sub = new Coordinate(-16, -16, -16);
var add = new Coordinate(16, 16, 16);
var behav = GameData.Behaviours.SingleOrDefault(x => x.Name == "size");
if (behav != null && behav.Values.Count >= 6)
{
sub = behav.GetCoordinate(0);
add = behav.GetCoordinate(1);
}
else if (GameData.Name == "infodecal")
{
sub = Coordinate.One * -4;
add = Coordinate.One * 4;
}
BoundingBox = new Box(Origin + sub, Origin + add);
}
else if (Children.Any())
{
BoundingBox = new Box(GetChildren().SelectMany(x => new[] {x.BoundingBox.Start, x.BoundingBox.End}));
}
else
{
BoundingBox = new Box(Origin, Origin);
}
base.UpdateBoundingBox(cascadeToParent);
}
public override void Unclone(MapObject o)
{
PasteBase(o, null, true);
var e = o as Entity;
if (e == null) return;
GameData = e.GameData;
Origin = e.Origin.Clone();
EntityData = e.EntityData.Clone();
}
public override void Transform(IUnitTransformation transform, TransformFlags flags)
{
Origin = transform.Transform(Origin);
base.Transform(transform, flags);
}
public override void Paste(MapObject o, IDGenerator generator)
{
PasteBase(o, generator);
var e = o as Entity;
if (e == null) return;
GameData = e.GameData;
Origin = e.Origin.Clone();
EntityData = e.EntityData.Clone();
}
public static void WritePlane(this BinaryWriter bw, Coordinate[] coords)
{
WriteCoordinate(bw, coords[0]);
WriteCoordinate(bw, coords[1]);
WriteCoordinate(bw, coords[2]);
}
public override void FocusOn(Coordinate coordinate)
{
FocusOn(coordinate, Coordinate.UnitY * -100);
}
public void FocusOn(Coordinate coordinate, Coordinate distance)
{
var pos = coordinate + distance;
Camera.Location = new Vector3((float)pos.X, (float)pos.Y, (float)pos.Z);
Camera.LookAt = new Vector3((float)coordinate.X, (float)coordinate.Y, (float)coordinate.Z);
}
public override void ToolDeselected(bool preventHistory)
{
if (_currentTool != null) _currentTool.ToolDeselected(preventHistory);
// Commit the changes
Commit(_copies.Values.ToList());
_copies = null;
Points = null;
_snapPointOffset = null;
_movingPoint = null;
MoveSelection = null;
_form.Hide();
Mediator.UnsubscribeAll(this);
}
public static void WriteCoordinate(this BinaryWriter bw, Coordinate c)
{
bw.WriteDecimalAsSingle(c.X);
bw.WriteDecimalAsSingle(c.Y);
bw.WriteDecimalAsSingle(c.Z);
}
public override void ToolSelected(bool preventHistory)
{
_form.Show(Editor.Instance);
Editor.Instance.Focus();
// Init the points and copy caches
_copies = new Dictionary<Solid, Solid>();
Points = new List<VMPoint>();
SelectionChanged();
_snapPointOffset = null;
_movingPoint = null;
MoveSelection = null;
if (_currentTool != null) _currentTool.ToolSelected(preventHistory);
Mediator.Subscribe(EditorMediator.SelectionChanged, this);
Mediator.Subscribe(HotkeysMediator.VMStandardMode, this);
Mediator.Subscribe(HotkeysMediator.VMScalingMode, this);
Mediator.Subscribe(HotkeysMediator.VMFaceEditMode, this);
}
public static Coordinate[] ReadCoordinateArray(this BinaryReader br, int num)
{
var arr = new Coordinate[num];
for (var i = 0; i < num; i++) arr[i] = br.ReadCoordinate();
return arr;
}
protected override void Render3D(Viewport3D vp)
{
base.Render3D(vp);
if (_currentTool != null) _currentTool.Render3D(vp);
TextureHelper.Unbind();
if (_currentTool == null || _currentTool.DrawVertices())
{
// Get us into 2D rendering
Matrix.Set(MatrixMode.Projection);
Matrix.Identity();
Graphics.Helpers.Viewport.Orthographic(0, 0, vp.Width, vp.Height);
Matrix.Set(MatrixMode.Modelview);
Matrix.Identity();
var half = new Coordinate(vp.Width, vp.Height, 0) / 2;
// Render out the point handles
GL.Begin(PrimitiveType.Quads);
foreach (var point in Points)
{
var c = vp.WorldToScreen(point.Coordinate);
if (c == null || c.Z > 1) continue;
c -= half;
GL.Color3(Color.Black);
GL.Vertex2(c.DX - 4, c.DY - 4);
GL.Vertex2(c.DX - 4, c.DY + 4);
GL.Vertex2(c.DX + 4, c.DY + 4);
GL.Vertex2(c.DX + 4, c.DY - 4);
GL.Color3(point.GetColour());
GL.Vertex2(c.DX - 3, c.DY - 3);
GL.Vertex2(c.DX - 3, c.DY + 3);
GL.Vertex2(c.DX + 3, c.DY + 3);
GL.Vertex2(c.DX + 3, c.DY - 3);
}
GL.End();
// Get back into 3D rendering
Matrix.Set(MatrixMode.Projection);
Matrix.Identity();
Graphics.Helpers.Viewport.Perspective(0, 0, vp.Width, vp.Height, View.CameraFOV);
Matrix.Set(MatrixMode.Modelview);
Matrix.Identity();
vp.Camera.Position();
}
var type = vp.Type;
bool shaded = type == Viewport3D.ViewType.Shaded || type == Viewport3D.ViewType.Textured,
textured = type == Viewport3D.ViewType.Textured,
wireframe = type == Viewport3D.ViewType.Wireframe;
// Render out the solid previews
GL.Color3(Color.White);
var faces = _copies.Keys.SelectMany(x => x.Faces).ToList();
if (!wireframe)
{
if (shaded) MapObjectRenderer.EnableLighting();
GL.Enable(EnableCap.Texture2D);
MapObjectRenderer.DrawFilled(faces.Where(x => !x.IsSelected), Color.FromArgb(255, 64, 192, 64), textured);
MapObjectRenderer.DrawFilled(faces.Where(x => x.IsSelected), Color.FromArgb(255, 255, 128, 128), textured);
GL.Disable(EnableCap.Texture2D);
MapObjectRenderer.DisableLighting();
GL.Color3(Color.Pink);
MapObjectRenderer.DrawWireframe(faces, true);
}
else
{
GL.Color4(Color.FromArgb(255, 64, 192, 64));
MapObjectRenderer.DrawWireframe(faces.Where(x => !x.IsSelected), true);
GL.Color4(Color.FromArgb(255, 255, 128, 128));
MapObjectRenderer.DrawWireframe(faces.Where(x => x.IsSelected), true);
}
}
