private void writeKML(string filename)
{
Color[] colours = { Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo, Color.Violet, Color.Pink };
Document kml = new Document();
Tour tour = new Tour();
tour.Name = "First Person View";
Playlist tourplaylist = new Playlist();
AddNamespace(kml, "gx", "http://www.google.com/kml/ext/2.2");
Style style = new Style();
style.Id = "yellowLineGreenPoly";
style.Line = new LineStyle(new Color32(HexStringToColor("7f00ffff")), 4);
PolygonStyle pstyle = new PolygonStyle();
pstyle.Color = new Color32(HexStringToColor("7f00ff00"));
style.Polygon = pstyle;
kml.AddStyle(style);
// create sub folders
Folder planes = new Folder();
planes.Name = "Planes";
kml.AddFeature(planes);
// coords for line string
CoordinateCollection coords = new CoordinateCollection();
int a = 1;
int c = -1;
DateTime lasttime = DateTime.MaxValue;
DateTime starttime = DateTime.MinValue;
Color stylecolor = Color.AliceBlue;
string mode = "";
if (flightdata.Count > 0)
{
mode = flightdata[0].mode;
}
foreach (CurrentState cs in flightdata)
{
progressBar1.Value = 50 + (int)((float)a / (float)flightdata.Count * 100.0f / 2.0f);
progressBar1.Refresh();
if (starttime == DateTime.MinValue)
{
starttime = cs.datetime;
lasttime = cs.datetime;
}
if (mode != cs.mode || flightdata.Count == a)
{
c++;
LineString ls = new LineString();
ls.AltitudeMode = SharpKml.Dom.AltitudeMode.Absolute;
ls.Extrude = true;
ls.Coordinates = coords;
Placemark pm = new Placemark();
pm.Name = c + " Flight Path " + mode;
pm.StyleUrl = new Uri("#yellowLineGreenPoly", UriKind.Relative);
pm.Geometry = ls;
SharpKml.Dom.TimeSpan ts = new SharpKml.Dom.TimeSpan();
ts.Begin = starttime;
ts.End = cs.datetime;
pm.Time = ts;
// setup for next line
mode = cs.mode;
starttime = cs.datetime;
stylecolor = colours[c % (colours.Length - 1)];
Style style2 = new Style();
style2.Line = new LineStyle(new Color32(stylecolor), 4);
pm.StyleSelector = style2;
kml.AddFeature(pm);
coords = new CoordinateCollection();
}
coords.Add(new Vector(cs.lat, cs.lng, cs.alt));
SharpKml.Dom.Timestamp tstamp = new SharpKml.Dom.Timestamp();
tstamp.When = cs.datetime;
FlyTo flyto = new FlyTo();
flyto.Duration = (cs.datetime - lasttime).TotalMilliseconds / 1000.0;
flyto.Mode = FlyToMode.Smooth;
SharpKml.Dom.Camera cam = new SharpKml.Dom.Camera();
cam.AltitudeMode = SharpKml.Dom.AltitudeMode.Absolute;
cam.Latitude = cs.lat;
cam.Longitude = cs.lng;
cam.Altitude = cs.alt;
cam.Heading = cs.yaw;
cam.Roll = -cs.roll;
cam.Tilt = (90 - (cs.pitch * -1));
cam.GXTimePrimitive = tstamp;
flyto.View = cam;
//if (Math.Abs(flyto.Duration.Value) > 0.1)
{
tourplaylist.AddTourPrimitive(flyto);
lasttime = cs.datetime;
}
Placemark pmplane = new Placemark();
pmplane.Name = "Plane " + a;
pmplane.Time = tstamp;
pmplane.Visibility = false;
SharpKml.Dom.Location loc = new SharpKml.Dom.Location();
loc.Latitude = cs.lat;
loc.Longitude = cs.lng;
loc.Altitude = cs.alt;
SharpKml.Dom.Orientation ori = new SharpKml.Dom.Orientation();
ori.Heading = cs.yaw;
ori.Roll = -cs.roll;
ori.Tilt = -cs.pitch;
SharpKml.Dom.Scale sca = new SharpKml.Dom.Scale();
sca.X = 2;
sca.Y = 2;
sca.Z = 2;
Model model = new Model();
model.Location = loc;
model.Orientation = ori;
model.AltitudeMode = SharpKml.Dom.AltitudeMode.Absolute;
model.Scale = sca;
try
{
Description desc = new Description();
desc.Text = @"<![CDATA[
<table>
<tr><td>Roll: " + model.Orientation.Roll + @" </td></tr>
<tr><td>Pitch: " + model.Orientation.Tilt + @" </td></tr>
<tr><td>Yaw: " + model.Orientation.Heading + @" </td></tr>
</table>
]]>";
pmplane.Description = desc;
}
catch { }
Link link = new Link();
link.Href = new Uri("block_plane_0.dae", UriKind.Relative);
model.Link = link;
pmplane.Geometry = model;
planes.AddFeature(pmplane);
a++;
}
tour.Playlist = tourplaylist;
kml.AddFeature(tour);
Serializer serializer = new Serializer();
serializer.Serialize(kml);
//Console.WriteLine(serializer.Xml);
StreamWriter sw = new StreamWriter(filename);
sw.Write(serializer.Xml);
sw.Close();
// create kmz - aka zip file
FileStream fs = File.Open(filename.Replace(Path.GetExtension(filename), ".kmz"), FileMode.Create);
ZipOutputStream zipStream = new ZipOutputStream(fs);
zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
zipStream.UseZip64 = UseZip64.Off; // older zipfile
// entry 1
string entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
ZipEntry newEntry = new ZipEntry(entryName);
newEntry.DateTime = DateTime.Now;
zipStream.PutNextEntry(newEntry);
// Zip the file in buffered chunks
// the "using" will close the stream even if an exception occurs
byte[] buffer = new byte[4096];
using (FileStream streamReader = File.Open(filename,FileMode.Open,FileAccess.Read,FileShare.ReadWrite))
{
StreamUtils.Copy(streamReader, zipStream, buffer);
}
zipStream.CloseEntry();
filename = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + "block_plane_0.dae";
// entry 2
entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
newEntry = new ZipEntry(entryName);
newEntry.DateTime = DateTime.Now;
zipStream.PutNextEntry(newEntry);
// Zip the file in buffered chunks
// the "using" will close the stream even if an exception occurs
buffer = new byte[4096];
using (FileStream streamReader = File.OpenRead(filename))
{
StreamUtils.Copy(streamReader, zipStream, buffer);
}
zipStream.CloseEntry();
zipStream.IsStreamOwner = true; // Makes the Close also Close the underlying stream
zipStream.Close();
File.Delete(filename);
flightdata.Clear();
}
public void AddLine(Line lineIn, Dictionary <string, string> dicData)
{
var colorLine = sb.Color32.Parse(ConvertColor(sb.Color32.Parse(lineIn.Color), lineIn.Opacity));
var style = new sd.Style
{
Line = new sd.LineStyle
{
Color = colorLine,
Width = lineIn.Width,
}
};
var line = new sd.LineString
{
Extrude = true,
Tessellate = true,
Coordinates = lineIn.Vectors
};
var placemark = new sd.Placemark
{
Name = lineIn.Name,
Geometry = line,
ExtendedData = ExtendedData(dicData)
};
placemark.AddStyle(style);
Document.AddFeature(placemark);
}
public static void Run()
{
// Create the style first
var style = new Style();
style.Id = "randomColorIcon";
style.Icon = new IconStyle();
style.Icon.Color = new Color32(255, 0, 255, 0);
style.Icon.ColorMode = ColorMode.Random;
style.Icon.Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/pal3/icon21.png"));
style.Icon.Scale = 1.1;
// Now create the object to apply the style to
var placemark = new Placemark();
placemark.Name = "IconStyle.kml";
placemark.StyleUrl = new Uri("#randomColorIcon", UriKind.Relative);
placemark.Geometry = new Point
{
Coordinate = new Vector(37.831145, -122.36868)
};
// Package it all together...
var document = new Document();
document.AddFeature(placemark);
document.AddStyle(style);
// And display the result
var serializer = new Serializer();
serializer.Serialize(document);
Console.WriteLine(serializer.Xml);
}
void StylesInDoc(List <StyleDoc> styleDocs)
{
foreach (var style in styleDocs)
{
var styleDoc = new sd.Style();
styleDoc.Id = style.Id;
styleDoc.Icon = new sd.IconStyle();
styleDoc.Icon.Icon = new sd.IconStyle.IconLink(new Uri(style.HrefPoint));
Document.AddStyle(styleDoc);
}
}
void StylesInDoc(List <StyleDoc> styleDocs)
{
foreach (var style in styleDocs)
{
var styleDoc = new sd.Style();
styleDoc.Id = style.Id;
styleDoc.Icon = new sd.IconStyle();
styleDoc.Icon.Icon = new sd.IconStyle.IconLink(new Uri(style.HrefPoint, UriKind.Relative));
styleDoc.Label = new sd.LabelStyle
{
Scale = 0
};
Document.AddStyle(styleDoc);
}
}
public void AddMarkerToContainer(Coord.Vector place, Container container, int number)
{
SharpKml.Dom.Style style = new SharpKml.Dom.Style();
style.Id = "MarkerStyle" + number.ToString();
style.Icon = new IconStyle();
style.Icon.Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/paddle/red-circle.png"));
Placemark placemark = new Placemark();
placemark.StyleUrl = new Uri("MarkerStyle" + number.ToString(), UriKind.Relative);
placemark.Geometry = new SharpKml.Dom.Point()
{
Coordinate = place
};
container.AddFeature(placemark);
container.AddStyle(style);
}
public void AddPoligon(Polygon poly, Dictionary <string, string> dicData)
{
var colorPoly = sb.Color32.Parse(ConvertColor(sb.Color32.Parse(poly.ColorPoly), poly.OpacityPoly));
var colorLine = sb.Color32.Parse(ConvertColor(sb.Color32.Parse(poly.ColorLine), poly.OpacityLine));
var style = new sd.Style
{
Polygon = new sd.PolygonStyle
{
Fill = true,
Color = colorPoly,
Outline = true
},
Line = new sd.LineStyle
{
Color = colorLine,
Width = poly.WidthLine,
}
};
var polygon = new sd.Polygon
{
Extrude = true,
Tessellate = true,
OuterBoundary = new sd.OuterBoundary
{
LinearRing = new sd.LinearRing
{
Coordinates = poly.OuterBoundaryIs
}
}
};
var placemark = new sd.Placemark
{
Name = poly.Name,
Geometry = polygon,
ExtendedData = ExtendedData(dicData)
};
placemark.AddStyle(style);
Document.AddFeature(placemark);
}
public static Style FindStyleByStyleURL(KmlFile kmlFile, string styleUrl)
{
SharpKml.Dom.Style style = null;
if (!String.IsNullOrEmpty(styleUrl))
{
if (styleUrl.StartsWith("#"))
{
styleUrl = styleUrl.Substring(1);
}
SharpKml.Dom.StyleSelector styleSelector = kmlFile.Styles.FirstOrDefault(s => s.Id == styleUrl);
if (styleSelector != null && styleSelector is StyleMapCollection)
{
StyleMapCollection styleMapCollection = styleSelector as StyleMapCollection;
styleMapCollection.ToList().ForEach(element =>
{
if (element is Pair)
{
Pair pair = element as Pair;
if (pair.State != null && pair.State == StyleState.Highlight)
{
string styleUrl2 = pair.StyleUrl.OriginalString;
if (!String.IsNullOrEmpty(styleUrl2))
{
if (styleUrl2.StartsWith("#"))
{
styleUrl2 = styleUrl2.Substring(1);
}
SharpKml.Dom.StyleSelector styleSelector2 = kmlFile.Styles.FirstOrDefault(s => s.Id == styleUrl2);
if (styleSelector2 != null && styleSelector2 is SharpKml.Dom.Style)
{
style = styleSelector2 as SharpKml.Dom.Style;
}
}
}
}
});
}
}
return(style);
}
public void AddSingleLineToContainer(Coord.Vector start, Coord.Vector end, byte color, Container container, int number)
{
SharpKml.Dom.Style style = new SharpKml.Dom.Style();
style.Id = "LineStyle" + number.ToString();
style.Line = new LineStyle();
style.Line.Color = new Coord.Color32(255, 0, (byte)(255 - color), color);
style.Line.Width = 3;
Placemark placemark = new Placemark();
placemark.StyleUrl = new Uri("LineStyle" + number.ToString(), UriKind.Relative);
LineString lineString = new LineString();
lineString.Coordinates = new CoordinateCollection();
lineString.Coordinates.Add(start);
lineString.Coordinates.Add(end);
placemark.Geometry = lineString;
container.AddFeature(placemark);
container.AddStyle(style);
}
public ActionResult Refresh()
{
IEnumerable<Prospect> prospectList = _prospectSerivce.getList();
int counter = 0;
Document document = new Document();
// get lat and long for each prospect
foreach (Prospect prospect in prospectList)
{
// some api's will only allow x calls per second this sleeper helps to space out the calls made to the web service
counter = counter + 1;
if (counter % 10 == 0)
{
System.Diagnostics.Debug.WriteLine("Sleeping" + counter);
System.Threading.Thread.Sleep(5000);
}
String responseFromServer = _prospectSerivce.makePrepData(prospect);
KmlPrepData kmlPrepData = new KmlPrepData();
//System.Diagnostics.Debug.WriteLine(responseFromServer);
kmlPrepData = _kmlPrepDataService.convertAddress(responseFromServer);
// update lat long to the database
_prospectSerivce.updateProspect(prospect);
}
//run stored procedure to update db
IEnumerable<JoinedProspect> joinedPospects = _joinedProspectService.getList();
// get results
//create styles for placemarkers
var doNotContactStyle = new Style();
doNotContactStyle.Id = "doNoContact";
doNotContactStyle.Icon = new IconStyle();
doNotContactStyle.Icon.Color = new Color32(255, 0, 255, 0);
doNotContactStyle.Icon.ColorMode = ColorMode.Normal;
doNotContactStyle.Icon.Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/pal3/icon47.png"));
doNotContactStyle.Icon.Scale = 1.1;
var currentCustomerStyle = new Style();
currentCustomerStyle.Id = "currentCustomer";
currentCustomerStyle.Icon = new IconStyle();
currentCustomerStyle.Icon.Color = new Color32(255, 0, 255, 0);
currentCustomerStyle.Icon.ColorMode = ColorMode.Normal;
currentCustomerStyle.Icon.Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/pal3/icon23.png"));
currentCustomerStyle.Icon.Scale = 1.1;
var cancelledCustomerStyle = new Style();
cancelledCustomerStyle.Id = "cancelledCustomer";
cancelledCustomerStyle.Icon = new IconStyle();
cancelledCustomerStyle.Icon.Color = new Color32(255, 0, 255, 0);
cancelledCustomerStyle.Icon.ColorMode = ColorMode.Normal;
cancelledCustomerStyle.Icon.Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/pal3/icon51.png"));
cancelledCustomerStyle.Icon.Scale = 1.1;
//add results to document
foreach (JoinedProspect jp in joinedPospects)
{
// loop through and add information to kmldocument
KmlPrepData kmlPrepData = new KmlPrepData();
_kmlDocumentService.addElementToKmlDocument(jp, document);
}
document.AddStyle(doNotContactStyle);
document.AddStyle(currentCustomerStyle);
document.AddStyle(cancelledCustomerStyle);
//var serializer = new Serializer();
//serializer.Serialize(document);
//System.Diagnostics.Debug.WriteLine(serializer.Xml);
_kmlDocumentService.saveKmlDocument(document);
return View();
}
protected void GenerateKml()
{
var id = Convert.ToInt32(Server.HtmlEncode(Request.QueryString["Code"]));
var document = new Document();
document.Id = "Document";
document.Name = "Document";
Description dsc = new Description();
dsc.Text = @"<h1>Car's Tracking</h1> ";
CoordinateCollection coordinates = new CoordinateCollection();
DataTable dt = new DataTable();
try
{
DataSet ds = FieldAreaViewMethof.getfieldAreaValue(id);
dt = ds.Tables[0];
string isreference = ds.Tables[0].Rows[0]["isReferencePoint"].ToString();
if (isreference == "True")
{
dt.Rows[0].Delete();
}
foreach (DataRow dr in dt.Rows)
{
double lon = double.Parse(ParseDMS(dr["Longitude"].ToString()).ToString());
double lat = double.Parse(ParseDMS(dr["Latitude"].ToString()).ToString());
coordinates.Add(new Vector(lat, lon, 0));
}
OuterBoundary outerBoundary = new OuterBoundary();
outerBoundary.LinearRing = new LinearRing();
outerBoundary.LinearRing.Coordinates = coordinates;
// Polygon Setting:
Polygon polygon = new Polygon();
polygon.Extrude = true;
polygon.AltitudeMode = AltitudeMode.ClampToGround;
polygon.OuterBoundary = outerBoundary;
//Color Style Setting:
byte byte_Color_R = 150, byte_Color_G = 150, byte_Color_B = 150, byte_Color_A = 100; //you may get your own color by other method
var style = new SharpKml.Dom.Style();
style.Polygon = new PolygonStyle();
style.Polygon.ColorMode = SharpKml.Dom.ColorMode.Normal;
style.Polygon.Color = new Color32(byte_Color_A, byte_Color_B, byte_Color_G, byte_Color_R);
//Set the polygon and style to the Placemark:
Placemark placemark = new Placemark();
placemark.Name = "Kukrail";
placemark.Geometry = polygon;
placemark.AddStyle(style);
//Finally to the document and save it
document.AddFeature(placemark);
var kml = new Kml();
kml.Feature = document;
KmlFile kmlFile = KmlFile.Create(kml, true);
if (File.Exists(Server.MapPath("~") + "MAP.kml"))
{
File.Delete(Server.MapPath("~") + "MAP.kml");
}
using (var stream = System.IO.File.OpenWrite(Server.MapPath("~") + "MAP.kml"))
{
kmlFile.Save(stream);
}
}
catch (Exception exc)
{
Response.Write(exc.Message);
}
finally
{
}
}
public void DoAcceptTcpClientCallback(IAsyncResult ar)
{
// Get the listener that handles the client request.
TcpListener listener = (TcpListener) ar.AsyncState;
// End the operation and display the received data on
// the console.
using (
TcpClient client = listener.EndAcceptTcpClient(ar))
{
// Signal the calling thread to continue.
tcpClientConnected.Set();
try
{
// Get a stream object for reading and writing
log.Info("Accepted Client " + client.Client.RemoteEndPoint.ToString());
//client.SendBufferSize = 100 * 1024; // 100kb
//client.LingerState.Enabled = true;
//client.NoDelay = true;
// makesure we have valid image
GCSViews.FlightData.myhud.streamjpgenable = true;
NetworkStream stream = client.GetStream();
// 5 seconds - default for httpd 2.2+
stream.ReadTimeout = 5000;
goto skipagain;
again:
log.Info("doing Again");
skipagain:
var asciiEncoding = new ASCIIEncoding();
var request = new byte[1024*4];
int len = 0;
// handle header
try
{
len = stream.Read(request, 0, request.Length);
}
catch
{
return;
}
string head = System.Text.Encoding.ASCII.GetString(request, 0, len);
log.Info(head);
int index = head.IndexOf('\n');
string url = head.Substring(0, index - 1);
//url = url.Replace("\r", "");
//url = url.Replace("GET ","");
//url = url.Replace(" HTTP/1.0", "");
//url = url.Replace(" HTTP/1.1", "");
Tracking.AddEvent("HTTPServer", "Get", url, "");
/////////////////////////////////////////////////////////////////
if (url.Contains("websocket"))
{
using (var writer = new StreamWriter(stream, Encoding.Default))
{
writer.WriteLine("HTTP/1.1 101 WebSocket Protocol Handshake");
writer.WriteLine("Upgrade: WebSocket");
writer.WriteLine("Connection: Upgrade");
writer.WriteLine("WebSocket-Location: ws://localhost:56781/websocket/server");
int start = head.IndexOf("Sec-WebSocket-Key:") + 19;
int end = head.IndexOf('\r', start);
if (end == -1)
end = head.IndexOf('\n', start);
string accept = ComputeWebSocketHandshakeSecurityHash09(head.Substring(start, end - start));
writer.WriteLine("Sec-WebSocket-Accept: " + accept);
writer.WriteLine("Server: Mission Planner");
writer.WriteLine("");
writer.Flush();
while (client.Connected)
{
Thread.Sleep(200);
log.Debug(stream.DataAvailable + " " + client.Available);
while (client.Available > 0)
{
Console.Write(stream.ReadByte());
}
byte[] packet = new byte[1024];
string sendme = MainV2.comPort.MAV.cs.roll + "," + MainV2.comPort.MAV.cs.pitch + "," + MainV2.comPort.MAV.cs.yaw
+ "," + MainV2.comPort.MAV.cs.lat + "," + MainV2.comPort.MAV.cs.lng + "," + MainV2.comPort.MAV.cs.alt;
packet[0] = 0x81; // fin - binary
packet[1] = (byte) sendme.Length;
int i = 2;
foreach (char ch in sendme)
{
packet[i++] = (byte) ch;
}
stream.Write(packet, 0, i);
//break;
}
}
}
/////////////////////////////////////////////////////////////////
else if (url.Contains("georefnetwork.kml"))
{
byte[] buffer = Encoding.ASCII.GetBytes(georefkml);
string header =
"HTTP/1.1 200 OK\r\nServer: here\r\nKeep-Alive: timeout=15, max=100\r\nConnection: Keep-Alive\r\nCache-Control: no-cache\r\nContent-Type: application/vnd.google-earth.kml+xml\r\nX-Pad: avoid browser bug\r\nContent-Length: " +
buffer.Length + "\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Write(buffer, 0, buffer.Length);
goto again;
//stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.Contains("network.kml"))
{
SharpKml.Dom.Document kml = new SharpKml.Dom.Document();
SharpKml.Dom.Placemark pmplane = new SharpKml.Dom.Placemark();
pmplane.Name = "P/Q " + MainV2.comPort.MAV.cs.altasl;
pmplane.Visibility = true;
SharpKml.Dom.Location loc = new SharpKml.Dom.Location();
loc.Latitude = MainV2.comPort.MAV.cs.lat;
loc.Longitude = MainV2.comPort.MAV.cs.lng;
loc.Altitude = MainV2.comPort.MAV.cs.altasl;
if (loc.Altitude < 0)
loc.Altitude = 0.01;
SharpKml.Dom.Orientation ori = new SharpKml.Dom.Orientation();
ori.Heading = MainV2.comPort.MAV.cs.yaw;
ori.Roll = -MainV2.comPort.MAV.cs.roll;
ori.Tilt = -MainV2.comPort.MAV.cs.pitch;
SharpKml.Dom.Scale sca = new SharpKml.Dom.Scale();
sca.X = 2;
sca.Y = 2;
sca.Z = 2;
SharpKml.Dom.Model model = new SharpKml.Dom.Model();
model.Location = loc;
model.Orientation = ori;
model.AltitudeMode = SharpKml.Dom.AltitudeMode.Absolute;
model.Scale = sca;
SharpKml.Dom.Link link = new SharpKml.Dom.Link();
link.Href = new Uri("block_plane_0.dae", UriKind.Relative);
model.Link = link;
pmplane.Geometry = model;
SharpKml.Dom.LookAt la = new SharpKml.Dom.LookAt()
{
Altitude = loc.Altitude.Value,
Latitude = loc.Latitude.Value,
Longitude = loc.Longitude.Value,
Tilt = 80,
Heading = MainV2.comPort.MAV.cs.yaw,
AltitudeMode = SharpKml.Dom.AltitudeMode.Absolute,
Range = 50
};
if (loc.Latitude.Value != 0 && loc.Longitude.Value != 0)
{
kml.Viewpoint = la;
kml.AddFeature(pmplane);
}
SharpKml.Dom.CoordinateCollection coords = new SharpKml.Dom.CoordinateCollection();
//if (loc.Latitude.Value != 0 && loc.Longitude.Value != 0)
{
//foreach (var point in MainV2.comPort.MAV.wps.Values)
{
// coords.Add(new SharpKml.Base.Vector(point.x, point.y, point.z));
}
}
//else
{
PointLatLngAlt home = null;
// draw track
try
{
foreach (var point in GCSViews.FlightPlanner.instance.fullpointlist)
{
if (point.Tag.ToLower().Contains("home"))
home = point;
if (point != null)
coords.Add(new SharpKml.Base.Vector(point.Lat, point.Lng, point.Alt));
}
}
catch
{
}
foreach (var point in GCSViews.FlightPlanner.instance.fullpointlist)
{
if (point == null)
continue;
SharpKml.Dom.Placemark wp = new SharpKml.Dom.Placemark();
wp.Name = "WP " + point.Tag + " Alt: " + point.Alt;
SharpKml.Dom.Point wppoint = new SharpKml.Dom.Point();
var altmode = SharpKml.Dom.AltitudeMode.RelativeToGround;
wppoint.AltitudeMode = altmode;
wppoint.Coordinate = new Vector()
{
Latitude = point.Lat,
Longitude = point.Lng,
Altitude = point.Alt
};
wp.Geometry = wppoint;
kml.AddFeature(wp);
}
}
SharpKml.Dom.LineString ls = new SharpKml.Dom.LineString();
ls.AltitudeMode = SharpKml.Dom.AltitudeMode.RelativeToGround;
ls.Coordinates = coords;
ls.Extrude = false;
ls.Tessellate = true;
Style style = new Style();
style.Id = "yellowLineGreenPoly";
style.Line = new LineStyle(new Color32(HexStringToColor("ff00ffff")), 4);
Style style2 = new Style();
style2.Id = "yellowLineGreenPoly";
style2.Line = new LineStyle(new Color32(HexStringToColor("7f00ffff")), 4);
// above ground
SharpKml.Dom.Placemark pm = new SharpKml.Dom.Placemark()
{
Geometry = ls,
Name = "WPs",
StyleSelector = style
};
kml.AddFeature(pm);
// on ground
SharpKml.Dom.LineString ls2 = new SharpKml.Dom.LineString();
ls2.Coordinates = coords;
ls2.Extrude = false;
ls2.Tessellate = true;
ls2.AltitudeMode = SharpKml.Dom.AltitudeMode.ClampToGround;
SharpKml.Dom.Placemark pm2 = new SharpKml.Dom.Placemark()
{
Geometry = ls2,
Name = "onground",
StyleSelector = style2
};
kml.AddFeature(pm2);
SharpKml.Base.Serializer serializer = new SharpKml.Base.Serializer();
serializer.Serialize(kml);
byte[] buffer = Encoding.ASCII.GetBytes(serializer.Xml);
string header =
"HTTP/1.1 200 OK\r\nContent-Type: application/vnd.google-earth.kml+xml\r\nContent-Length: " +
buffer.Length + "\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Write(buffer, 0, buffer.Length);
goto again;
//stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.Contains("block_plane_0.dae"))
{
string header = "HTTP/1.1 200 OK\r\nContent-Type: text/plain\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
BinaryReader file =
new BinaryReader(File.Open("block_plane_0.dae", FileMode.Open, FileAccess.Read,
FileShare.Read));
byte[] buffer = new byte[1024];
while (file.PeekChar() != -1)
{
int leng = file.Read(buffer, 0, buffer.Length);
stream.Write(buffer, 0, leng);
}
file.Close();
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.Contains("hud.html"))
{
string header = "HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
BinaryReader file =
new BinaryReader(File.Open("hud.html", FileMode.Open, FileAccess.Read, FileShare.Read));
byte[] buffer = new byte[1024];
while (file.PeekChar() != -1)
{
int leng = file.Read(buffer, 0, buffer.Length);
stream.Write(buffer, 0, leng);
}
file.Close();
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("hud.jpg") || url.ToLower().Contains("map.jpg") ||
url.ToLower().Contains("both.jpg"))
{
refreshmap();
string header =
"HTTP/1.1 200 OK\r\nContent-Type: multipart/x-mixed-replace;boundary=PLANNER\r\n\r\n--PLANNER\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
while (client.Connected)
{
System.Threading.Thread.Sleep(200); // 5hz
byte[] data = null;
if (url.ToLower().Contains("hud"))
{
GCSViews.FlightData.myhud.streamjpgenable = true;
data = GCSViews.FlightData.myhud.streamjpg.ToArray();
}
else if (url.ToLower().Contains("map"))
{
data = GetControlJpegRaw(GCSViews.FlightData.mymap);
}
else
{
GCSViews.FlightData.myhud.streamjpgenable = true;
Image img1 = Image.FromStream(GCSViews.FlightData.myhud.streamjpg);
Image img2 = GetControlJpeg(GCSViews.FlightData.mymap);
int bigger = img1.Height > img2.Height ? img1.Height : img2.Height;
Image imgout = new Bitmap(img1.Width + img2.Width, bigger);
Graphics grap = Graphics.FromImage(imgout);
grap.DrawImageUnscaled(img1, 0, 0);
grap.DrawImageUnscaled(img2, img1.Width, 0);
MemoryStream streamjpg = new MemoryStream();
imgout.Save(streamjpg, System.Drawing.Imaging.ImageFormat.Jpeg);
data = streamjpg.ToArray();
}
header = "Content-Type: image/jpeg\r\nContent-Length: " + data.Length + "\r\n\r\n";
temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Write(data, 0, data.Length);
header = "\r\n--PLANNER\r\n";
temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
}
GCSViews.FlightData.myhud.streamjpgenable = false;
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.Contains("/guided?"))
{
//http://127.0.0.1:56781/guided?lat=-34&lng=117.8&alt=30
Regex rex = new Regex(@"lat=([\-\.0-9]+)&lng=([\-\.0-9]+)&alt=([\.0-9]+)",
RegexOptions.IgnoreCase);
Match match = rex.Match(url);
if (match.Success)
{
Locationwp gwp = new Locationwp()
{
lat = double.Parse(match.Groups[1].Value),
lng = double.Parse(match.Groups[2].Value),
alt = float.Parse(match.Groups[3].Value)
};
try
{
MainV2.comPort.setGuidedModeWP(gwp);
}
catch
{
}
string header = "HTTP/1.1 200 OK\r\n\r\nSent Guide Mode Wp";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
}
else
{
string header = "HTTP/1.1 200 OK\r\n\r\nFailed Guide Mode Wp";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
}
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains(".jpg"))
{
Regex rex = new Regex(@"([^\s]+)\s(.+)\sHTTP/1", RegexOptions.IgnoreCase);
Match match = rex.Match(url);
if (match.Success)
{
string fileurl = match.Groups[2].Value;
using (Image orig = Image.FromFile(georefimagepath + fileurl))
using (Image resi = ResizeImage(orig, new Size(640, 480)))
using (MemoryStream memstream = new MemoryStream())
{
resi.Save(memstream, System.Drawing.Imaging.ImageFormat.Jpeg);
memstream.Position = 0;
string header =
"HTTP/1.1 200 OK\r\nServer: here\r\nKeep-Alive: timeout=15, max=100\r\nConnection: Keep-Alive\r\nContent-Type: image/jpg\r\nX-Pad: avoid browser bug\r\nContent-Length: " +
memstream.Length + "\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
using (BinaryReader file = new BinaryReader(memstream))
{
byte[] buffer = new byte[1024];
while (file.BaseStream.Position < file.BaseStream.Length)
{
int leng = file.Read(buffer, 0, buffer.Length);
stream.Write(buffer, 0, leng);
}
}
}
goto again;
//stream.Close();
}
/////////////////////////////////////////////////////////////////
else
{
string header = "HTTP/1.1 404 not found\r\nContent-Type: image/jpg\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
}
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("post /guide"))
{
Regex rex = new Regex(@"lat"":([\-\.0-9]+),""lon"":([\-\.0-9]+),""alt"":([\.0-9]+)",
RegexOptions.IgnoreCase);
Match match = rex.Match(head);
if (match.Success)
{
Locationwp gwp = new Locationwp()
{
lat = double.Parse(match.Groups[1].Value),
lng = double.Parse(match.Groups[2].Value),
alt = float.Parse(match.Groups[3].Value)
};
try
{
MainV2.comPort.setGuidedModeWP(gwp);
}
catch
{
}
string header = "HTTP/1.1 200 OK\r\n\r\nSent Guide Mode Wp";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
}
else
{
string header = "HTTP/1.1 200 OK\r\n\r\nFailed Guide Mode Wp";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
}
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("/command_long"))
{
string header = "HTTP/1.1 404 not found\r\nContent-Type: image/jpg\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("/rcoverride"))
{
string header = "HTTP/1.1 404 not found\r\nContent-Type: image/jpg\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("/get_mission"))
{
string header = "HTTP/1.1 404 not found\r\nContent-Type: image/jpg\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("/mavlink/"))
{
/*
GET /mavlink/ATTITUDE+VFR_HUD+NAV_CONTROLLER_OUTPUT+META_WAYPOINT+GPS_RAW_INT+HEARTBEAT+META_LINKQUALITY+GPS_STATUS+STATUSTEXT+SYS_STATUS?_=1355828718540 HTTP/1.1
Host: ubuntu:9999
Connection: keep-alive
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11
Accept:
Referer: http://ubuntu:9999/index.html
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-GB,en-US;q=0.8,en;q=0.6
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3
HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 2121
Date: Thu, 29 Nov 2012 12:13:38 GMT
Server: ubuntu
{
"VFR_HUD": {"msg": {"throttle": 0, "groundspeed": 0.0, "airspeed": 0.0, "climb": 0.0, "mavpackettype": "VFR_HUD", "alt": -0.47999998927116394, "heading": 108}, "index": 687, "time_usec": 0},
"STATUSTEXT": {"msg": {"mavpackettype": "STATUSTEXT", "severity": 1, "text": "Initialising APM..."}, "index": 2, "time_usec": 0},
"SYS_STATUS": {"msg": {"onboard_control_sensors_present": 4294966287, "load": 0, "battery_remaining": -1, "errors_count4": 0, "drop_rate_comm": 0, "errors_count2": 0, "errors_count3": 0, "errors_comm": 0, "current_battery": -1, "errors_count1": 0, "onboard_control_sensors_health": 4294966287, "mavpackettype": "SYS_STATUS", "onboard_control_sensors_enabled": 4294945807, "voltage_battery": 10080}, "index": 693, "time_usec": 0},
"META_LINKQUALITY": {"msg": {"master_in": 11110, "mav_loss": 0, "mavpackettype": "META_LINKQUALITY", "master_out": 194, "packet_loss": 0.0}, "index": 194, "time_usec": 0},
"ATTITUDE": {"msg": {"pitchspeed": -0.000976863200776279, "yaw": 1.8878594636917114, "rollspeed": -0.0030046366155147552, "time_boot_ms": 194676, "pitch": -0.09986469894647598, "mavpackettype": "ATTITUDE", "yawspeed": -0.0015030358918011189, "roll": -0.029391441494226456}, "index": 687, "time_usec": 0},
"GPS_RAW_INT": {"msg": {"fix_type": 1, "cog": 0, "epv": 65535, "lon": 0, "time_usec": 0, "eph": 9999, "satellites_visible": 0, "lat": 0, "mavpackettype": "GPS_RAW_INT", "alt": 137000, "vel": 0}, "index": 687, "time_usec": 0},
"HEARTBEAT": {"msg": {"custom_mode": 0, "system_status": 4, "base_mode": 81, "autopilot": 3, "mavpackettype": "HEARTBEAT", "type": 2, "mavlink_version": 3}, "index": 190, "time_usec": 0},
"GPS_STATUS": {"msg": {"satellite_snr": "", "satellite_azimuth": "", "satellite_prn": "", "satellite_elevation": "", "satellites_visible": 0, "satellite_used": "", "mavpackettype": "GPS_STATUS"}, "index": 2, "time_usec": 0},
"NAV_CONTROLLER_OUTPUT": {"msg": {"wp_dist": 0, "nav_pitch": 0.0, "target_bearing": 0, "nav_roll": 0.0, "aspd_error": 0.0, "alt_error": 0.0, "mavpackettype": "NAV_CONTROLLER_OUTPUT", "xtrack_error": 0.0, "nav_bearing": 0}, "index": 687, "time_usec": 0}}
*/
JavaScriptSerializer serializer = new JavaScriptSerializer();
object[] data = new object[20];
Messagejson message = new Messagejson();
if (MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.ATTITUDE) != null)
message.ATTITUDE = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.ATTITUDE)
.ToStructure<MAVLink.mavlink_attitude_t>()
};
if (MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.VFR_HUD) != null)
message.VFR_HUD = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.VFR_HUD)
.ToStructure<MAVLink.mavlink_vfr_hud_t>()
};
if (MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.NAV_CONTROLLER_OUTPUT) != null)
message.NAV_CONTROLLER_OUTPUT = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.NAV_CONTROLLER_OUTPUT)
.ToStructure<MAVLink.mavlink_nav_controller_output_t>()
};
if (MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.GPS_RAW_INT) != null)
message.GPS_RAW_INT = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.GPS_RAW_INT)
.ToStructure<MAVLink.mavlink_gps_raw_int_t>()
};
if (MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.HEARTBEAT) != null)
message.HEARTBEAT = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.HEARTBEAT)
.ToStructure<MAVLink.mavlink_heartbeat_t>()
};
if (MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.GPS_STATUS) != null)
message.GPS_STATUS = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.GPS_STATUS)
.ToStructure<MAVLink.mavlink_gps_status_t>()
};
if (MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.STATUSTEXT) != null)
message.STATUSTEXT = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.STATUSTEXT)
.ToStructure<MAVLink.mavlink_statustext_t>()
};
if (MainV2.comPort.MAV.getPacket((byte) MAVLink.MAVLINK_MSG_ID.SYS_STATUS) != null)
message.SYS_STATUS = new Message2()
{
index = 1,
msg =
MainV2.comPort.MAV.getPacket((byte)MAVLink.MAVLINK_MSG_ID.SYS_STATUS)
.ToStructure<MAVLink.mavlink_sys_status_t>()
};
message.META_LINKQUALITY =
message.SYS_STATUS =
new Message2()
{
index = packetindex,
time_usec = 0,
msg =
new META_LINKQUALITY()
{
master_in = (int) MainV2.comPort.MAV.packetsnotlost,
mavpackettype = "META_LINKQUALITY",
master_out = MainV2.comPort.packetcount,
packet_loss = 100 - MainV2.comPort.MAV.cs.linkqualitygcs,
mav_loss = 0
}
};
packetindex++;
string output = serializer.Serialize(message);
string header = "HTTP/1.1 200 OK\r\nContent-Type: application/json\r\nContent-Length: " +
output.Length + "\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
temp = asciiEncoding.GetBytes(output);
stream.Write(temp, 0, temp.Length);
goto again;
//stream.Close();
}
/////////////////////////////////////////////////////////////////
else if (url.ToLower().Contains("/mav/"))
{
//C:\Users\hog\Desktop\DIYDrones\mavelous\modules\lib\mavelous_web
Regex rex = new Regex(@"([^\s]+)\s(.+)\sHTTP/1", RegexOptions.IgnoreCase);
Match match = rex.Match(url);
if (match.Success)
{
string fileurl = match.Groups[2].Value;
fileurl = fileurl.Replace("/mav/", "");
if (fileurl == "" || fileurl == "/")
fileurl = "index.html";
string header = "HTTP/1.1 200 OK\r\n";
if (fileurl.Contains(".html"))
header += "Content-Type: text/html\r\n\r\n";
else if (fileurl.Contains(".js"))
header += "Content-Type: application/x-javascript\r\n\r\n";
else if (fileurl.Contains(".css"))
header += "Content-Type: text/css\r\n\r\n";
else
header += "Content-Type: text/plain\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
BinaryReader file =
new BinaryReader(File.Open(mavelous_web + fileurl, FileMode.Open, FileAccess.Read,
FileShare.Read));
byte[] buffer = new byte[1024];
while (file.BaseStream.Position < file.BaseStream.Length)
{
int leng = file.Read(buffer, 0, buffer.Length);
stream.Write(buffer, 0, leng);
}
file.Close();
stream.Close();
}
/////////////////////////////////////////////////////////////////
else
{
string header = "HTTP/1.1 404 not found\r\nContent-Type: image/jpg\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
stream.Close();
}
}
/////////////////////////////////////////////////////////////////
else
{
Console.WriteLine(url);
string header = "HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n";
byte[] temp = asciiEncoding.GetBytes(header);
stream.Write(temp, 0, temp.Length);
string content = @"
<a href=/mav/>Mavelous</a>
<a href=/mavlink/>Mavelous traffic</a>
<a href=/hud.jpg>Hud image</a>
<a href=/map.jpg>Map image </a>
<a href=/both.jpg>Map & hud image</a>
<a href=/hud.html>hud html5</a>
<a href=/network.kml>network kml</a>
<a href=/georefnetwork.kml>georef kml</a>
";
temp = asciiEncoding.GetBytes(content);
stream.Write(temp, 0, temp.Length);
}
stream.Close();
log.Info("Close http " + url);
}
catch (Exception ee)
{
log.Error("Failed http ", ee);
}
}
}
/// <summary>
/// Apply PolyStyle, LineStyle, and/or IconStyle elements of a KML Style to the given VectorStyle.
/// </summary>
/// <remarks>
/// As per KML documentation, in cases where a style element is defined both in a
/// shared style and in an inline style for a Feature (eg Placemark) the value of
/// the Feature's inline style takes precedence over the value for the shared style
/// </remarks>
/// <param name="vectorStyle">cloned if kmlStyle is not null</param>
/// <param name="kmlStyle">Style to apply to existing VectorStyle</param>
private VectorStyle ApplyStyleOverrides(VectorStyle vectorStyle, Style kmlStyle)
{
if (kmlStyle == null)
{
return(vectorStyle);
}
if (kmlStyle.Polygon == null && kmlStyle.Line == null && kmlStyle.Icon == null)
{
return(vectorStyle);
}
vectorStyle = vectorStyle.Clone();
if (kmlStyle.Polygon != null)
{
// fill
var fill = kmlStyle.Polygon.Fill.GetValueOrDefault(((SolidBrush)vectorStyle.Fill).Color.A > 0);
var argb = kmlStyle.Polygon.Color?.Argb ?? ((SolidBrush)vectorStyle.Fill).Color.ToArgb();
vectorStyle.Fill =
fill
? new SolidBrush(Color.FromArgb(argb))
: new SolidBrush(Color.Transparent);
// outline
vectorStyle.EnableOutline = kmlStyle.Polygon.Outline.GetValueOrDefault(vectorStyle.EnableOutline);
var width = kmlStyle.Line?.Width ?? vectorStyle.Outline.Width;
argb = kmlStyle.Line?.Color?.Argb ?? vectorStyle.Outline.Color.ToArgb();
vectorStyle.Outline = vectorStyle.EnableOutline
? new Pen(Color.FromArgb(argb), (float)width)
: new Pen(Color.Transparent);
}
if (kmlStyle.Line != null)
{
var width = kmlStyle.Line.Width.GetValueOrDefault(vectorStyle.Line.Width);
var argb = kmlStyle.Line.Color?.Argb ?? vectorStyle.Line.Color.ToArgb();
vectorStyle.Line = new Pen(Color.FromArgb(argb), (float)width);
}
try
{
if (kmlStyle.Icon != null)
{
RasterPointSymbolizer rps = null;
if (kmlStyle.Icon.Icon != null && kmlStyle.Icon.Icon.Href != null)
{
rps = new RasterPointSymbolizer();
if (_symbolDict.ContainsKey(kmlStyle.Icon.Icon.Href.ToString()))
{
rps.Symbol = _symbolDict[kmlStyle.Icon.Icon.Href.ToString()];
}
else
{
var newSymbol = GetImageFromUrl(kmlStyle.Icon.Icon.Href);
_symbolDict.Add(kmlStyle.Icon.Icon.Href.ToString(), newSymbol);
rps.Symbol = newSymbol;
}
vectorStyle.PointSymbolizer = rps;
}
if (vectorStyle.PointSymbolizer is RasterPointSymbolizer)
{
rps = (RasterPointSymbolizer)vectorStyle.PointSymbolizer;
var argb = kmlStyle.Icon.Color?.Argb ?? ((SolidBrush)vectorStyle.PointColor).Color.ToArgb();
rps.SymbolColor = Color.FromArgb(argb);
rps.RemapColor = Color.White;
rps.Scale = (float)kmlStyle.Icon.Scale.GetValueOrDefault(1);
}
}
}
catch (Exception ex)
{
Trace.WriteLine(ex.Message);
}
return(vectorStyle);
}
// function that writes out KML file based on the flight chosen by the user
private void CreateKMLButton_Click(object sender, EventArgs e)
{
int nCount;
int nFlightID;
string sfilename;
long lprevTimestamp;
bLoggingEnabled = false;
if (FlightPickerLV.SelectedItems.Count < 1)
{
MessageBox.Show("Please choose a flight before exporting.", "Export KML File");
return;
}
if (KMLFilePathTBRO.Text.Length == 0)
{
MessageBox.Show("Please choose a folder location before exporting.", "Export KML File");
return;
}
nFlightID = (int)FlightPickerLV.SelectedItems[0].Tag;
// This is the root element of the file
var kml = new Kml();
Folder mainFolder = new Folder();
mainFolder.Name = String.Format("{0} {1}", FlightPickerLV.SelectedItems[0].SubItems[1].Text, FlightPickerLV.SelectedItems[0].SubItems[0].Text);
mainFolder.Description = new Description
{
Text = "Overall Data for the flight"
};
kml.Feature = mainFolder;
// start of Flight Path Line
var placemarkLine = new Placemark();
mainFolder.AddFeature(placemarkLine);
placemarkLine.Name = "Flight Path Line";
placemarkLine.Description = new Description
{
Text = "Line of the flight"
};
var linestring = new LineString();
var coordinatecollection = new CoordinateCollection();
linestring.Coordinates = coordinatecollection;
linestring.AltitudeMode = AltitudeMode.Absolute;
SharpKml.Dom.LineStyle lineStyle = new SharpKml.Dom.LineStyle();
lineStyle.Color = Color32.Parse("ff0000ff");
lineStyle.Width = 5;
Style flightStyle = new Style();
flightStyle.Id = "FlightStyle";
flightStyle.Line = lineStyle;
linestring.Extrude = false;
mainFolder.AddStyle(flightStyle);
SharpKml.Dom.Style waypointStyle = new SharpKml.Dom.Style();
waypointStyle.Id = "WaypointStyle";
waypointStyle.Icon = new SharpKml.Dom.IconStyle();
waypointStyle.Icon.Icon = new SharpKml.Dom.IconStyle.IconLink(new System.Uri("https://maps.google.com/mapfiles/kml/paddle/grn-square.png"));
mainFolder.AddStyle(waypointStyle);
SharpKml.Dom.Style pushpinblueStyle = new SharpKml.Dom.Style();
pushpinblueStyle.Id = "PushPinBlueStyle";
pushpinblueStyle.Icon = new SharpKml.Dom.IconStyle();
pushpinblueStyle.Icon.Icon = new SharpKml.Dom.IconStyle.IconLink(new System.Uri("https://maps.google.com/mapfiles/kml/pushpin/blue-pushpin.png"));
mainFolder.AddStyle(pushpinblueStyle);
SharpKml.Dom.Style pushpingreenStyle = new SharpKml.Dom.Style();
pushpingreenStyle.Id = "PushPinGreenStyle";
pushpingreenStyle.Icon = new SharpKml.Dom.IconStyle();
pushpingreenStyle.Icon.Icon = new SharpKml.Dom.IconStyle.IconLink(new System.Uri("https://maps.google.com/mapfiles/kml/pushpin/grn-pushpin.png"));
mainFolder.AddStyle(pushpingreenStyle);
placemarkLine.StyleUrl = new Uri("#FlightStyle", UriKind.Relative);
List <FlightPathData> FlightPath = new List <FlightPathData>();
FlightPath = FlightPathDB.GetFlightPathData(nFlightID);
foreach (FlightPathData fpd in FlightPath)
{
coordinatecollection.Add(new Vector(fpd.latitude, fpd.longitude, fpd.altitude * 0.3048));
}
placemarkLine.Geometry = linestring;
// start of Flight Plan Waypoints
List <FlightWaypointData> FlightWaypoints = new List <FlightWaypointData>();
FlightWaypoints = FlightPathDB.GetFlightWaypoints(nFlightID);
if (FlightWaypoints.Count > 0)
{
Folder FlightPlanFolder = new Folder();
FlightPlanFolder.Name = "Flight Plan";
FlightPlanFolder.Description = new Description
{
Text = "Waypoints along the flight plan"
};
mainFolder.AddFeature(FlightPlanFolder);
foreach (FlightWaypointData waypointData in FlightWaypoints)
{
var placemarkPoint = new Placemark();
placemarkPoint.Name = waypointData.gps_wp_name;
placemarkPoint.StyleUrl = new System.Uri("#WaypointStyle", UriKind.Relative);
placemarkPoint.Geometry = new SharpKml.Dom.Point
{
Coordinate = new Vector(waypointData.gps_wp_latitude, waypointData.gps_wp_longitude, (double)waypointData.gps_wp_altitude * 0.3048),
AltitudeMode = AltitudeMode.Absolute
};
placemarkPoint.Description = new Description
{
Text = String.Concat(String.Format("Coordinates ({0:0.0000}, {1:0.0000}, {2} feet)", waypointData.gps_wp_longitude, waypointData.gps_wp_latitude, waypointData.gps_wp_altitude))
};
FlightPlanFolder.AddFeature(placemarkPoint);
}
}
// start of Flight Data Points
Folder DataPointsfolder = new Folder();
DataPointsfolder.Name = "Flight Path Data Points";
DataPointsfolder.Visibility = false;
DataPointsfolder.Description = new Description
{
Text = "Data Points along the flight path"
};
mainFolder.AddFeature(DataPointsfolder);
nCount = 0;
foreach (FlightPathData fpd in FlightPath)
{
var placemarkPoint = new Placemark();
string descriptioncard;
bool bAnyLightsOn = false;
nCount++;
// if Google Earth App then you need to turn off visibility on each data point also
if (GoogleEarthAppRB.Checked == true)
{
placemarkPoint.Visibility = false;
}
placemarkPoint.Name = String.Concat("Flight Data Point ", nCount.ToString());
placemarkPoint.Id = nCount.ToString();
descriptioncard = String.Concat("<br>Timestamp = ", new DateTime(fpd.timestamp).ToString());
descriptioncard += String.Concat(String.Format("<br><br>Coordinates ({0:0.0000}, {1:0.0000}, {2} feet)", fpd.latitude, fpd.longitude, fpd.altitude));
descriptioncard += String.Format("<br>Temperature: {0:0.00}C / {1:0.00}F", fpd.ambient_temperature, fpd.ambient_temperature * 9 / 5 + 32);
descriptioncard += String.Format("<br>Wind: {0:0.00} knts from {1:0.00} degrees", fpd.ambient_wind_velocity, fpd.ambient_wind_direction);
descriptioncard += String.Format("<br>Altitude Above Ground: {0} feet", fpd.altitudeaboveground);
if (fpd.sim_on_ground == 1)
{
descriptioncard += String.Format("<br>Plane Is On The Ground");
}
descriptioncard += String.Format("<br><br>Heading Indicator: {0:0.00} degrees", fpd.heading_indicator);
descriptioncard += String.Format("<br>True Heading: {0:0.00} degrees", fpd.plane_heading_true);
descriptioncard += String.Format("<br>Magnetic Heading {0:0.00} degrees", fpd.plane_heading_magnetic);
descriptioncard += string.Format("<br><br>Airspeed Indicated: {0:0.00 knts}", fpd.plane_airspeed_indicated);
descriptioncard += string.Format("<br>Airspeed True: {0:0.00} knts", fpd.airspeed_true);
descriptioncard += string.Format("<br>Ground Velocity: {0:0.00} knts", fpd.ground_velocity);
descriptioncard += string.Format("<br>Engine 1: {0} RPM", fpd.Eng1Rpm);
if (fpd.Eng2Rpm > 0)
{
descriptioncard += string.Format("<br>Engine 2: {0} RPM", fpd.Eng2Rpm);
}
if (fpd.Eng3Rpm > 0)
{
descriptioncard += string.Format("<br>Engine 3: {0} RPM", fpd.Eng3Rpm);
}
if (fpd.Eng4Rpm > 0)
{
descriptioncard += string.Format("<br>Engine 4: {0} RPM", fpd.Eng4Rpm);
}
descriptioncard += string.Format("<br><br>Pitch: {0:0.00} degrees {1}", Math.Abs(fpd.plane_pitch), fpd.plane_pitch < 0 ? "Up" : "Down");
descriptioncard += string.Format("<br>Bank: {0:0.00} degrees {1}", Math.Abs(fpd.plane_bank), fpd.plane_bank < 0 ? "Right" : "Left");
descriptioncard += string.Format("<br>Vertical Speed: {0:0} feet per minute", fpd.vertical_speed);
descriptioncard += string.Concat("<br>Flaps Position: ", fpd.flaps_handle_position);
descriptioncard += string.Concat("<br><br>Lights On: ");
// go thru mask and set lights that are on
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Nav) == (int)FlightPathData.LightStates.Nav)
{
descriptioncard += string.Concat("Nav, ");
bAnyLightsOn = true;
}
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Beacon) == (int)FlightPathData.LightStates.Beacon)
{
descriptioncard += string.Concat("Beacon, ");
bAnyLightsOn = true;
}
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Landing) == (int)FlightPathData.LightStates.Landing)
{
descriptioncard += string.Concat("Landing, ");
bAnyLightsOn = true;
}
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Taxi) == (int)FlightPathData.LightStates.Taxi)
{
descriptioncard += string.Concat("Taxi, ");
bAnyLightsOn = true;
}
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Strobe) == (int)FlightPathData.LightStates.Strobe)
{
descriptioncard += string.Concat("Strobe, ");
bAnyLightsOn = true;
}
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Panel) == (int)FlightPathData.LightStates.Panel)
{
descriptioncard += string.Concat("Panel, ");
bAnyLightsOn = true;
}
// commented out the following lights because most planes don't use them and it messes up the GA aircraft
/* if ((fpd.LightsMask & (int)FlightPathData.LightStates.Recognition) == (int)FlightPathData.LightStates.Recognition)
* {
* descriptioncard += string.Concat("Recognition, ");
* bAnyLightsOn = true;
* }
* if ((fpd.LightsMask & (int)FlightPathData.LightStates.Wing) == (int)FlightPathData.LightStates.Wing)
* {
* descriptioncard += string.Concat("Wing, ");
* bAnyLightsOn = true;
* }
* if ((fpd.LightsMask & (int)FlightPathData.LightStates.Logo) == (int)FlightPathData.LightStates.Logo)
* {
* descriptioncard += string.Concat("Logo, ");
* bAnyLightsOn = true;
* }*/
if ((fpd.LightsMask & (int)FlightPathData.LightStates.Cabin) == (int)FlightPathData.LightStates.Cabin)
{
descriptioncard += string.Concat("Cabin, ");
bAnyLightsOn = true;
}
// if there are no masks then put none else remove last two characters which are the comma and the space from above
if (bAnyLightsOn == false)
{
descriptioncard += string.Concat("None");
}
else
{
descriptioncard = descriptioncard.Remove(descriptioncard.Length - 2, 2);
}
if (fpd.is_gear_retractable == 1)
{
descriptioncard += String.Concat("<br>Gear Position: ", fpd.gear_handle_position == 1 ? "Down" : "Up");
}
if (fpd.spoiler_available == 1)
{
descriptioncard += String.Concat("<br>Spoiler Position: ", fpd.spoilers_handle_position == 1 ? "On" : "Off");
}
if (fpd.stall_warning == 1)
{
descriptioncard += "<br>Stall Warning";
}
if (fpd.overspeed_warning == 1)
{
descriptioncard += "<br>Overspeed Warning";
}
placemarkPoint.Description = new Description
{
Text = descriptioncard
};
// turned off showing time with data points as it caused issues of not showing in Google Earth
// if user turned them off and then back on
/* placemarkPoint.Time = new SharpKml.Dom.Timestamp
* {
* When = new DateTime(fpd.timestamp)
* };*/
if (fpd.sim_on_ground == 1)
{
placemarkPoint.StyleUrl = new System.Uri("#PushPinGreenStyle", UriKind.Relative);
}
else
{
placemarkPoint.StyleUrl = new System.Uri("#PushPinBlueStyle", UriKind.Relative);
}
placemarkPoint.Geometry = new SharpKml.Dom.Point
{
Coordinate = new Vector(fpd.latitude, fpd.longitude, (double)fpd.altitude * 0.3048),
AltitudeMode = AltitudeMode.Absolute
};
DataPointsfolder.AddFeature(placemarkPoint);
}
// add 1st person feature
SharpKml.Dom.GX.Tour tour = new SharpKml.Dom.GX.Tour();
tour.Name = "First Person View of Flight";
kml.AddNamespacePrefix("gx", "http://www.google.com/kml/ext/2.2");
SharpKml.Dom.GX.Playlist playlist = new SharpKml.Dom.GX.Playlist();
tour.Playlist = playlist;
mainFolder.AddFeature(tour);
lprevTimestamp = 0;
nCount = 0;
foreach (FlightPathData fpd in FlightPath)
{
nCount++;
SharpKml.Dom.GX.FlyTo flyto = new SharpKml.Dom.GX.FlyTo();
// assume duration will be based on difference between timestamps
// if first time thru loop and don't have old time or user wants to speed up video playback above threshold
// then set duration to 1 if it is greater than 1 else leave as-is
flyto.Duration = (new DateTime(fpd.timestamp) - new DateTime(lprevTimestamp)).TotalMilliseconds / 1000;
if ((lprevTimestamp == 0) ||
(SpeedUpVideoPlaybackCB.Checked == true))
{
if (flyto.Duration > 1)
{
flyto.Duration = 1;
}
}
lprevTimestamp = fpd.timestamp;
flyto.Mode = SharpKml.Dom.GX.FlyToMode.Smooth;
SharpKml.Dom.Camera cam = new SharpKml.Dom.Camera();
cam.AltitudeMode = SharpKml.Dom.AltitudeMode.Absolute;
cam.Latitude = fpd.latitude;
cam.Longitude = fpd.longitude;
cam.Altitude = fpd.altitude * 0.3048;
cam.Heading = fpd.plane_heading_true;
if (GoogleEarthAppRB.Checked == true)
{
cam.Roll = fpd.plane_bank;
}
else
{
cam.Roll = fpd.plane_bank * -1;
}
cam.Tilt = (90 - fpd.plane_pitch);
SharpKml.Dom.Timestamp tstamp = new SharpKml.Dom.Timestamp();
tstamp.When = new DateTime(fpd.timestamp);
cam.GXTimePrimitive = tstamp;
flyto.View = cam;
playlist.AddTourPrimitive(flyto);
// change it so balloons show during first person view (for potential future use)
/*
* var placemarkPoint = new Placemark();
* placemarkPoint.TargetId = nCount.ToString();
* placemarkPoint.GXBalloonVisibility = true;
* SharpKml.Dom.Update update = new SharpKml.Dom.Update();
* update.AddUpdate(new ChangeCollection() { placemarkPoint });
* SharpKml.Dom.GX.AnimatedUpdate animatedUpdate = new SharpKml.Dom.GX.AnimatedUpdate();
* animatedUpdate.Update = update;
* playlist.AddTourPrimitive(animatedUpdate);*/
}
// write out KML file
char[] invalidFileNameChars = Path.GetInvalidFileNameChars();
sfilename = String.Format("{0}_{1}.kml", FlightPickerLV.SelectedItems[0].SubItems[1].Text, FlightPickerLV.SelectedItems[0].SubItems[0].Text);
var validfilename = new string(sfilename.Select(ch => invalidFileNameChars.Contains(ch) ? '_' : ch).ToArray());
sfilename = string.Concat(KMLFilePathTBRO.Text, "\\");
sfilename += validfilename;
System.IO.File.Delete(sfilename);
KmlFile kmlfile = KmlFile.Create(kml, true);
using (var stream = System.IO.File.OpenWrite(sfilename))
{
kmlfile.Save(stream);
}
MessageBox.Show(String.Format("Flight successfully exported to {0}", sfilename), "Export KML File");
}
TreeViewItem ProcessPlacemark(Placemark placemark)
{
string name = placemark.Name;
StackPanel pan = new StackPanel();
pan.Orientation = System.Windows.Controls.Orientation.Horizontal;
SharpKml.Dom.Style style = KmlFileHelper.FindStyleByStyleURL(_kmlFile, placemark.StyleUrl.OriginalString);
if (placemark.Geometry is SharpKml.Dom.Point)
{
Uri uri = null;
if (style != null && style.Icon != null && style.Icon.Icon != null && style.Icon.Icon.Href != null)
{
uri = style.Icon.Icon.Href;
}
Image image = new Image();
image.Height = 16;
image.Source = _imagesFromUri.FindImageByUri(uri);
pan.Children.Add(image);
}
else if (placemark.Geometry is LineString)
{
GeometryGroup Lines = new GeometryGroup();
Color32 styleColor = new Color32();
if (style != null && style.Line != null && style.Line.Color != null)
{
styleColor = (Color32)style.Line.Color;
}
// Line
LineGeometry line = new LineGeometry();
line.StartPoint = new System.Windows.Point(0, 5);
line.EndPoint = new System.Windows.Point(10, 5);
Lines.Children.Add(line);
GeometryDrawing MyGeometryDrawing = new GeometryDrawing();
MyGeometryDrawing.Geometry = Lines;
MyGeometryDrawing.Brush = new SolidColorBrush(Color.FromArgb(styleColor.Alpha, styleColor.Red, styleColor.Green, styleColor.Blue));
MyGeometryDrawing.Pen = new Pen(MyGeometryDrawing.Brush, 1);
DrawingImage drawingImage = new DrawingImage(MyGeometryDrawing);
drawingImage.Freeze();
Image image = new Image();
image.Height = 16;
image.Width = 16;
image.Source = drawingImage;
pan.Children.Add(image);
}
TextBlock textBlock = new TextBlock();
textBlock.Text = name;
textBlock.Margin = new System.Windows.Thickness(4, 0, 0, 0);
pan.Children.Add(textBlock);
KMLFeatureTreeViewItem item = new KMLFeatureTreeViewItem()
{
Header = pan,
Feature = placemark
};
return(item);
}
public string GetKml()
{
var matchId = _currentMatchProvider.GetMatchId();
SharpKml.Dom.Kml kml = new SharpKml.Dom.Kml();
var document = new Document();
kml.Feature = document;
var c = System.Drawing.ColorTranslator.FromHtml("#33FF33");
var postStyle = new Style();
postStyle.Id = "post_vanlig";
postStyle.Icon = new IconStyle
{
Color = new Color32(c.A, c.R, c.G, c.B),
Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/paddle/wht-blank.png")),
Scale = 0.5
};
document.AddStyle(postStyle);
var lagFolder = new Folder { Name = "Lag" };
var postFolder = new Folder { Name = "Poster" };
document.AddFeature(lagFolder);
document.AddFeature(postFolder);
using (var context = _dataContextFactory.Create())
{
var match = context.Matcher.Single(x => x.MatchId == matchId);
var maxLat = match.GeoboxNWLatitude.GetValueOrDefault();
var minLat = match.GeoboxSELatitude.GetValueOrDefault();
var minLon = match.GeoboxNWLongitude.GetValueOrDefault();
var maxLon = match.GeoboxSELongitude.GetValueOrDefault();
var poster = (from pim in context.PosterIMatch
where pim.Match.MatchId == matchId
select
new
{
pim.SynligFraTid,
pim.SynligTilTid,
pim.Post.Navn,
pim.Post.Latitude,
pim.Post.Longitude
}).ToList();
foreach (var p in poster)
{
var placemark = new Placemark();
placemark.StyleUrl = new Uri("#post_vanlig", UriKind.Relative);
placemark.Time = new TimeSpan { Begin = p.SynligFraTid, End = p.SynligTilTid };
placemark.Name = p.Navn;
placemark.Geometry = new Point { Coordinate = new Vector(p.Latitude, p.Longitude) };
postFolder.AddFeature(placemark);
}
var lag = context.Lag.ToList();
var lagDictionary = new Dictionary<string, Folder>();
foreach (var lag1 in lag)
{
var color = System.Drawing.ColorTranslator.FromHtml("#" + lag1.Farge);
var style = new Style();
style.Id = LagStyleKey(lag1.LagId);
style.Icon = new IconStyle
{
Color = new Color32(color.A, color.R, color.G, color.B),
Icon = new IconStyle.IconLink(new Uri("http://maps.google.com/mapfiles/kml/paddle/wht-blank-lv.png")),
Scale = 0.3
};
document.AddStyle(style);
var folder = new Folder { Name = lag1.Navn };
lagDictionary.Add(lag1.LagId, folder);
lagFolder.AddFeature(folder);
}
var førsteRegistering = (from r in context.PostRegisteringer
select r.RegistertTidspunkt).Min().AddMinutes(-5);
var avsluttet = (from r in poster
select r.SynligTilTid).Min().AddMinutes(5);
var deltakerPosisjoner = (from p in context.DeltakerPosisjoner
join d in context.Deltakere on p.DeltakerId equals d.DeltakerId
where førsteRegistering < p.Tidspunkt && p.Tidspunkt < avsluttet
select new
{
p.Latitude,
p.Longitude,
p.DeltakerId,
d.Navn,
d.Lag.Farge,
d.Lag.LagId,
p.Tidspunkt
}).GroupBy(x => x.DeltakerId).ToDictionary(x => x.Key, y => y);
foreach (var deltaker in deltakerPosisjoner)
{
//if (deltaker.Key != "MS_3-2")
// continue;
var førstePosisjon = deltaker.Value.FirstOrDefault();
var placemark = new Placemark();
placemark.StyleUrl = new Uri("#" + LagStyleKey(førstePosisjon.LagId), UriKind.Relative);
placemark.Name = førstePosisjon.Navn;
var posisjoner = deltaker.Value.OrderBy(x => x.Tidspunkt).ToList();
var track = new Track();
var forrigePosisjon = førstePosisjon;
foreach (var pos in posisjoner)
{
// Utafor boksen
if (pos.Latitude > maxLat || pos.Latitude < minLat || pos.Longitude > maxLon || pos.Longitude < minLon)
{
continue;
}
var meter = DistanseKalkulator.MeterMellom(forrigePosisjon.Latitude, forrigePosisjon.Longitude, pos.Latitude, pos.Longitude);
var sekunder = pos.Tidspunkt.Subtract(forrigePosisjon.Tidspunkt).TotalSeconds;
if (sekunder > 0)
{
var fart = meter / sekunder;
if (fart > 8.333) // raskere enn 12 blank på 100m
{
continue;
}
}
track.AddWhen(pos.Tidspunkt);
track.AddCoordinate(new Vector(pos.Latitude, pos.Longitude));
forrigePosisjon = pos;
}
placemark.Geometry = track;
lagDictionary[førstePosisjon.LagId].AddFeature(placemark);
}
}
Serializer serializer = new Serializer();
serializer.Serialize(kml);
return serializer.Xml;
}
public static Func<ExportContext, SharpKml.Dom.Style> CreateFromSharpmapStyle(IStyle sharpmapStyle)
{
if (sharpmapStyle == null)
throw new ArgumentNullException("sharpmapStyle");
var vectorStyle = sharpmapStyle as VectorStyle;
if (vectorStyle == null) return null;
SharpKml.Dom.Style style = null;
var install = new Action<ExportContext>(context =>
{
style = new SharpKml.Dom.Style
{
Id = sharpmapStyle.GetHashCode().ToString(CultureInfo.InvariantCulture)
};
if (vectorStyle.Line != null)
{
var lineStyle = new LineStyle();
style.Line = lineStyle;
var color = vectorStyle.Line.Color;
lineStyle.Color = new Color32(color.A, color.B, color.G, color.R);
lineStyle.ColorMode = ColorMode.Normal;
lineStyle.Width = vectorStyle.Line.Width;
}
var solidColor = ConvertToColor32(vectorStyle.Fill);
if (solidColor != null)
{
var polygonStyle = new PolygonStyle();
style.Polygon = polygonStyle;
polygonStyle.Fill = true;
polygonStyle.Color = solidColor;
}
if (vectorStyle.Symbol == null)
{
if (vectorStyle.PointSize > 0)
{
var iconStyle = new IconStyle();
var pointColor = vectorStyle.PointColor != null
? ConvertToColor32(vectorStyle.PointColor) ?? new Color32(255, 0, 0, 0)
: new Color32(255, 0, 0, 0);
iconStyle.Color = pointColor;
iconStyle.ColorMode = ColorMode.Normal;
iconStyle.Icon = new IconStyle.IconLink(Pushpins.ShadedDot);
iconStyle.Scale = vectorStyle.PointSize / 6;
style.Icon = iconStyle;
}
}
else
{
var additionalFile = SaveImagetoDisk(vectorStyle.Symbol);
Debug.Assert(additionalFile != null, "additionalFile != null");
context.AdditionalFiles.Add(additionalFile);
var iconStyle = new IconStyle
{
Icon = new IconStyle.IconLink(new Uri(context.IsKmz ? Path.GetFileName(additionalFile) : additionalFile, UriKind.Relative)),
Scale = vectorStyle.SymbolScale
};
style.Icon = iconStyle;
}
});
EventHandler endedHandler = delegate { style = null; };
return context =>
{
if (style == null && sharpmapStyle.Enabled)
{
install(context);
context.Exporter.Ended -= endedHandler;
context.Exporter.Ended += endedHandler;
}
return style;
};
}
public static Func <ExportContext, SharpKml.Dom.Style> CreateFromSharpmapStyle(IStyle sharpmapStyle)
{
if (sharpmapStyle == null)
{
throw new ArgumentNullException("sharpmapStyle");
}
var vectorStyle = sharpmapStyle as VectorStyle;
if (vectorStyle == null)
{
return(null);
}
SharpKml.Dom.Style style = null;
var install = new Action <ExportContext>(context =>
{
style = new SharpKml.Dom.Style
{
Id = sharpmapStyle.GetHashCode().ToString(CultureInfo.InvariantCulture)
};
if (vectorStyle.Line != null)
{
var lineStyle = new LineStyle();
style.Line = lineStyle;
var color = vectorStyle.Line.Color;
lineStyle.Color = new Color32(color.A, color.B, color.G, color.R);
lineStyle.ColorMode = ColorMode.Normal;
lineStyle.Width = vectorStyle.Line.Width;
}
var solidColor = ConvertToColor32(vectorStyle.Fill);
if (solidColor != null)
{
var polygonStyle = new PolygonStyle();
style.Polygon = polygonStyle;
polygonStyle.Fill = true;
polygonStyle.Color = solidColor;
}
if (vectorStyle.Symbol == null)
{
if (vectorStyle.PointSize > 0)
{
var iconStyle = new IconStyle();
var pointColor = vectorStyle.PointColor != null
? ConvertToColor32(vectorStyle.PointColor) ?? new Color32(255, 0, 0, 0)
: new Color32(255, 0, 0, 0);
iconStyle.Color = pointColor;
iconStyle.ColorMode = ColorMode.Normal;
iconStyle.Icon = new IconStyle.IconLink(Pushpins.ShadedDot);
iconStyle.Scale = vectorStyle.PointSize / 6;
style.Icon = iconStyle;
}
}
else
{
var additionalFile = SaveImagetoDisk(vectorStyle.Symbol);
Debug.Assert(additionalFile != null, "additionalFile != null");
context.AdditionalFiles.Add(additionalFile);
var iconStyle = new IconStyle
{
Icon = new IconStyle.IconLink(new Uri(context.IsKmz ? Path.GetFileName(additionalFile) : additionalFile, UriKind.Relative)),
Scale = vectorStyle.SymbolScale
};
style.Icon = iconStyle;
}
});
EventHandler endedHandler = delegate { style = null; };
return(context =>
{
if (style == null && sharpmapStyle.Enabled)
{
install(context);
context.Exporter.Ended -= endedHandler;
context.Exporter.Ended += endedHandler;
}
return style;
});
}