public static SemBeamType Create(string name, string pieceMark, IfcBeamTypeEnum ifcBeamTypeEnum)
{
var beamType = new SemBeamType(name, pieceMark, ifcBeamTypeEnum);
SemInstanceDB.AddToExport(beamType);
return(beamType);
}
public static SemBeamType Retrieve(SemMainPiece mainPiece)
{
if (mainPiece.IfcObject.GetType() == typeof(IfcBeam))
{
var ret = new SemBeamType();
//if (!EarlyBindingInstanceModel.TheModel.DataByType.ContainsKey("IfcRelDefinesByType")) return null;
var collection1 = EarlyBindingInstanceModel.GetDataByType("IfcRelDefinesByType").Values;
//if (collection.Count != 1) throw new NotImplementedException();
foreach (var item in collection1)
{
var theItem = item as IfcRelDefinesByType;
if (theItem == null)
{
continue;
}
foreach (var a in theItem.RelatedObjects)
{
if (a.EIN == mainPiece.IfcObject.EIN)
{
//if (!EarlyBindingInstanceModel.TheModel.DataByType.ContainsKey("IfcBeamType")) return null;
var collection2 = EarlyBindingInstanceModel.GetDataByType("IfcBeamType").Values;
foreach (var item2 in collection2)
{
if (item2.EIN == theItem.RelatingType.EIN)
{
var type = item2 as IfcBeamType;
if (type == null)
{
continue;
}
var beamType = new SemBeamType {
IfcTypeProduct = type, IfcRelDefinesByType = theItem
};
beamType.DefinedElements.Add(mainPiece);
SemInstanceDB.AddToExport(beamType);
ret = beamType;
}
}
}
}
}
return(ret);
}
else
{
return(null);
}
}
public static SemBeamType Retrieve(SemMainPiece mainPiece)
{
if (mainPiece.IfcObject.GetType() == typeof(IfcBeam))
{
var ret = new SemBeamType();
//if (!EarlyBindingInstanceModel.TheModel.DataByType.ContainsKey("IfcRelDefinesByType")) return null;
var collection1 = EarlyBindingInstanceModel.GetDataByType("IfcRelDefinesByType").Values;
//if (collection.Count != 1) throw new NotImplementedException();
foreach (var item in collection1)
{
var theItem = item as IfcRelDefinesByType;
if (theItem == null) continue;
foreach (var a in theItem.RelatedObjects)
{
if (a.EIN == mainPiece.IfcObject.EIN)
{
//if (!EarlyBindingInstanceModel.TheModel.DataByType.ContainsKey("IfcBeamType")) return null;
var collection2 = EarlyBindingInstanceModel.GetDataByType("IfcBeamType").Values;
foreach (var item2 in collection2)
{
if (item2.EIN == theItem.RelatingType.EIN)
{
var type = item2 as IfcBeamType;
if (type == null) continue;
var beamType = new SemBeamType { IfcTypeProduct = type, IfcRelDefinesByType = theItem };
beamType.DefinedElements.Add(mainPiece);
SemInstanceDB.AddToExport(beamType);
ret = beamType;
}
}
}
}
}
return ret;
}
else { return null; }
}
public static SemBeamType Create(string name, string pieceMark, IfcBeamTypeEnum ifcBeamTypeEnum)
{
var beamType = new SemBeamType(name, pieceMark, ifcBeamTypeEnum);
SemInstanceDB.AddToExport(beamType);
return beamType;
}
public static bool Tester4Writer(string filename)
{
var em11PsetName = @"AISC_EM11_Pset_Status";
SemHeaderSetting.Create(
"donghoon", "Georgia Tech", "sem Tool", "alpha 1", "gatech", SemUnit.Metric);
var floor = SemFloor.CreateSingleStoreyProject(
"project", "site", "building", "1st floor", 0);
// assembly 1-Beam-------------------------------------------------------------------------------------
var assembly = SemAssembly.Create(
"assid001",
"Steel Assembly",
"ASS01",
"client_marker",
"prelim_marker",
"ship_mark",
"102301123423", floor,
SemCoordinate3D.Create(0, 0, 6000), SemDirection3D.ZAxis, SemDirection3D.XAxis);
// assembly 1 properties
//Quantity
var qAssemBeam = SemQuantityRequired.Create();
qAssemBeam.Add(assembly);
//Finish/tearment
var paintAssem = PaintFinish.Create();
assembly.AddPaintFinish(paintAssem);
var pSetAssemSTr01 = SemPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAssem1Pset = SemSurfaceTreatmentProperty.Create(pSetAssemSTr01, new List <string> {
"Painted"
});
paintAssem1Pset.AssignTo(assembly);
//Scheduling
var pSetAssemSc01 = SemPropertySet.Create(@"AISC_EM11_Pset_Schedule");
var AssemSch01 = SemSchedule.Create(pSetAssemSc01, "seq01", "seqLevel 01", DateTime.Now);
AssemSch01.AssignTo(assembly);
//Status
var pSetAssemSt01 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var AssemStat01 = SemStatus.Create(pSetAssemSt01, "Default", "Default", true);
AssemStat01.AssignTo(assembly);
//Drawing number
var pSetAssemDN01 = SemPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem1Pset = SemDrawingNumber.Create(pSetAssemDN01, new List <string> {
"DR001PH1005", "DR001PH1004"
});
DnumberAssem1Pset.AssignTo(assembly);
//Version
var pSetAssemVr01 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAssem01 = SemVersion.Create(pSetAssemVr01, "versionAssem01");
versionAssem01.AssignTo(assembly);
// main piece 1- Beam------------------------------------------------------------------------------------
var profile = SemNamedIProfile.Create("AISC", "W460X260", 260, 508, 22.6, 40.4);
var mainPart = SemMainPiece.Create(
"P0001",
"main piece", profile, 6000,
SemCoordinate3D.Create(0, 0, -254),
SemDirection3D.XAxis,
SemDirection3D.YAxis,
assembly);
var beamType = SemBeamType.Create("wideflange", "pm0001", IfcBeamTypeEnum.BEAM);
beamType.Defines(mainPart);
// Main piece 1-Beam properties
//Identification
var pieceIdBeam01 = SemPieceIdentity.Create("indMark001", "pieceMark001", "prelimMark001", "barcode123456890", true);
pieceIdBeam01.AssignTo(mainPart);
//Material
var pSetMat2 = SemPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialBeam01 = SemMaterial.Create("ASTM A992", pSetMat2, "materialID001", "materialCert001", "materialGrade001", "materialType001");
materialBeam01.AssociateTo(mainPart);
//Quantity
var qBeam = SemQuantityRequired.Create();
qBeam.Add(mainPart);
//Finish/treatment
////var paint2 = PaintFinish.Create("p1001", "antirust", "paint");
var coord2d00 = SemCoordinate2D.Create(-100, 0);
var coord2d01 = SemCoordinate2D.Create(100, 0);
var coord2d02 = SemCoordinate2D.Create(100, 3400);
var coord2d03 = SemCoordinate2D.Create(-100, 3400);
var poly2d0 = SemPolyline2D.Create(new[] { coord2d00, coord2d01, coord2d02, coord2d03 });
var coord2d10 = SemCoordinate2D.Create(-40, 1500);
var coord2d11 = SemCoordinate2D.Create(40, 1500);
var coord2d12 = SemCoordinate2D.Create(40, 2500);
var coord2d13 = SemCoordinate2D.Create(-40, 2500);
var poly2d1 = SemPolyline2D.Create(new[] { coord2d10, coord2d11, coord2d12, coord2d13 });
var sg = SemSurfaceGeometry.Create(poly2d0, new[] { poly2d1 });
var paint3 = SemPaintFinishPatch.Create("p1001", "antirust", "paint", sg);
var ploc = SemLocalPlacement3D.Create(
mainPart.ObjectSemLocalPlacement,
SemPosition3D.Create(
SemCoordinate3D.Create(0, 254, 100),
SemDirection3D.YAxis,
SemDirection3D.XAxisMinus)
);
mainPart.AddPaintFinish(paint3, ploc);
var pSetBeamSTr01 = SemPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintBeam1Pset = SemSurfaceTreatmentProperty.Create(pSetBeamSTr01, new List <string> {
"Galvanized"
});
paintBeam1Pset.AssignTo(mainPart);
//Status
var pSetBeamSt01 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusBeam01 = SemStatus.Create(pSetBeamSt01, "Default", "Default", false);
statusBeam01.AssignTo(mainPart);
//Version
var pSetBeamVr01 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionBeam01 = SemVersion.Create(pSetBeamVr01, "versionBeam01");
versionBeam01.AssignTo(mainPart);
//Tolerance
var pSetBeamLT01 = SemPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceBeam01 = SemLayoutTolerance.Create(pSetBeamLT01, 0.01);
toleranceBeam01.AssignTo(mainPart);
//Catellation
//No castellation needed
//Feature
//SemAnnotation.Create
// ("north", "LocationOfMark", mainPart, SemCoordinate3D.Create(0, 254, 5), SemDirection3D.YAxis,
// SemDirection3D.XAxisMinus);
//SemPosition3D pos = SemPosition3D.Create(
// SemCoordinate3D.Create(0, 0, 100),
// SemDirection3D.Create(0.215665546, -0.107832773, -0.970494959),
// SemDirection3D.Create(-0.970494959, 0.107832773, -0.215665546)
// );
//SemSkewedEnd.Create(mainPart, pos);
//// var arb = ArbitraryProfile.Create(poly2d0);
////
//// ExtrudedElement.Create(
//// "new", arb, 10, Coordinate3D.Create(0, 254, 100),
//// Direction3D.YAxis, Direction3D.XAxisMinus,
//// mainPart, typeof(IfcPlate));
////// TypeProduct.Create(mainPart, "main piece", typeof(IfcBeam));
//SemCutCope.Create(mainPart, 210, 50, 10, SemCopeLocation.BottomRight);
//SemCutCope.Create(mainPart, 210, 50, 10, SemCopeLocation.TopRight);
////CutCope.Create(mainPart, 210, 50, 10, CopeLocation.BottomLeft);
////CutCope.Create(mainPart, 210, 50, 10, CopeLocation.TopLeft);
var bHoleBeam01 = SemDrillHoles.Create(mainPart, SemCoordinate2D.Create(1100, 60), 30, SemHoleLocation.Bottom, false);
var bHoleBeam02 = SemDrillHoles.Create(mainPart, SemCoordinate2D.Create(1100, -60), 30, SemHoleLocation.Bottom, true);
var bHoleBeam03 = SemDrillHoles.Create(mainPart, SemCoordinate2D.Create(1200, 60), 30, SemHoleLocation.Top, true);
var bHoleBeam04 = SemDrillHoles.Create(mainPart, SemCoordinate2D.Create(1200, -60), 30, SemHoleLocation.Top, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(300, 60), 15, HoleLocation.Left, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(400, -60), 15, HoleLocation.Left, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(500, 60), 15, HoleLocation.Right, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(600, -60), 15, HoleLocation.Right, true);
var bHoleBeam05 = SemDrillHoles.Create(mainPart, SemCoordinate2D.Create(700, 60), 15, SemHoleLocation.Web, false);
var bHoleBeam06 = SemDrillHoles.Create(mainPart, SemCoordinate2D.Create(800, -60), 15, SemHoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(6000 - 106.5, -100), 15, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(6000 - 91.5, 100), 20, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(101.5 + 5, -100), 15, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(101.5 + 5, 100), 15, HoleLocation.Web, true);
//Beam Bolt Hole properties
var pSetBeamBH01 = SemPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleBeamPset1 = SemBoltHoleProperties.Create(pSetBeamBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 30, false, 0);
boltHoleBeamPset1.AssignTo(bHoleBeam01);
boltHoleBeamPset1.AssignTo(bHoleBeam02);
boltHoleBeamPset1.AssignTo(bHoleBeam03);
boltHoleBeamPset1.AssignTo(bHoleBeam04);
boltHoleBeamPset1.AssignTo(bHoleBeam05);
boltHoleBeamPset1.AssignTo(bHoleBeam06);
// Stiffeners-------------------------------------------------------------------------------------------
//Stiffener1
var stiffener1 = SemStiffener.Create("st00102", "stiffener", 100, 425, 35,
SemCoordinate3D.Create(65, 0, 5000), SemDirection3D.ZAxis, SemDirection3D.XAxis, mainPart);
//Stifenner1 properties
//Identification
var stiffIdentity1 = SemPieceIdentity.Create("indMark002", "pieceMark002", "prelimMark002", "barcode123456892", false);
stiffIdentity1.AssignTo(stiffener1);
//Status
var pSetStstiff01 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusstiff01 = SemStatus.Create(pSetStstiff01, "ReadyForProcurement", "Default", true);
statusstiff01.AssignTo(stiffener1);
//Version
var pSetVrstiff01 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionstiff01 = SemVersion.Create(pSetVrstiff01, "versionStiff01");
versionstiff01.AssignTo(stiffener1);
//Tolerance
var pSetLystiff01 = SemPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var tolerancestiff01 = SemLayoutTolerance.Create(pSetLystiff01, 0.01);
tolerancestiff01.AssignTo(stiffener1);
//Quantity
var qStiff = SemQuantityRequired.Create();
qStiff.Add(stiffener1);
//Material
var pSetMat1 = SemPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialStiff = SemMaterial.Create("ASTM A992", pSetMat1, "materialID002",
"materialCert002", "materialGrade002", "materialType002");
materialStiff.AssociateTo(stiffener1);
//Finish/treatment
var paintStiff = PaintFinish.Create();
stiffener1.AddPaintFinish(paintStiff);
var pSetSTstiff01 = SemPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintStiffPset = SemSurfaceTreatmentProperty.Create(pSetSTstiff01, new List <string> {
"Galvanized"
});
paintStiffPset.AssignTo(stiffener1);
//Stiffener2-------------------------------
var stiffener2 = SemStiffener.Create("st00102", "stiffener", 100, 425, 35,
SemCoordinate3D.Create(-65, 0, 5000), SemDirection3D.ZAxis, SemDirection3D.XAxis, mainPart);
//Stifenner2 properties
//Identification
var stiffIdentity2 = SemPieceIdentity.Create("indMark003", "pieceMark003", "prelimMark003", "barcode123456893", false);
stiffIdentity2.AssignTo(stiffener2);
//Status
statusstiff01.AssignTo(stiffener2);
//Version
versionstiff01.AssignTo(stiffener2);
//Tolerance
tolerancestiff01.AssignTo(stiffener2);
//Quantity
qStiff.Add(stiffener2);
//Material
materialStiff.AssociateTo(stiffener2);
//Finish/treatment
stiffener2.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener2);
//Stiffener3-------------------------------
var stiffener3 = SemStiffener.Create("st00102", "stiffener", 100, 425, 35,
SemCoordinate3D.Create(65, 0, 4600), SemDirection3D.ZAxis, SemDirection3D.XAxis, mainPart);
//Stifenner3 properties
//Identification
var stiffIdentity3 = SemPieceIdentity.Create("indMark004", "pieceMark004", "prelimMark004", "barcode123456894", false);
stiffIdentity3.AssignTo(stiffener3);
//Status
statusstiff01.AssignTo(stiffener3);
//Version
versionstiff01.AssignTo(stiffener3);
//Tolerance
tolerancestiff01.AssignTo(stiffener3);
//Quantity
qStiff.Add(stiffener3);
//Material
materialStiff.AssociateTo(stiffener3);
//Finish/treatment
stiffener3.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener3);
//Stiffener4-------------------------------
var stiffener4 = SemStiffener.Create("st00102", "stiffener", 100, 425, 35,
SemCoordinate3D.Create(-65, 0, 4600), SemDirection3D.ZAxis, SemDirection3D.XAxis, mainPart);
//Stifenner4 properties
//Identification
var stiffIdentity4 = SemPieceIdentity.Create("indMark005", "pieceMark005", "prelimMark005", "barcode123456895", false);
stiffIdentity4.AssignTo(stiffener4);
//Status
statusstiff01.AssignTo(stiffener4);
//Version
versionstiff01.AssignTo(stiffener4);
//Tolerance
tolerancestiff01.AssignTo(stiffener4);
//Quantity
qStiff.Add(stiffener4);
//Material
materialStiff.AssociateTo(stiffener4);
//Finish/treatment
stiffener4.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener4);
// welding stiffeners with beam //DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
//SemSlottedHole.Create(mainPart, SemCoordinate2D.Create(3000, 50), 70, 30, SemDirection2D.RefDirection,
// SemHoleLocation.Web, true);
//2 Clip angles for column1----------------------------------------------------------------------------------
var aProfile = SemNamedLProfile.Create("AISC", "L203X152X19", 203, 152, 19);
var derived1 = SemDerivedProfile.Create(aProfile, false, true);
// -90.3 for showing gap between elements
var angle = SemClipAngle.Create(
"a00102",
"angle",
derived1, 360,
//SemCoordinate3D.Create(5898.5, 90.3, -180 - 254),
SemCoordinate3D.Create(90.3, -180, 5898.5),
SemDirection3D.YAxis, SemDirection3D.Axis,
mainPart
);
//var w000 = SemCoordinate3D.Create(5898.5, 0, 0);
//var w001 = SemCoordinate3D.Create(5898.5, 0, 200);
var w000 = SemCoordinate3D.Create(5898.5, 0, 0);
var w001 = SemCoordinate3D.Create(5898.5, 0, 200);
var curve = SemPolyline3D.Create(new SemCoordinate3D[] { w000, w001 });
var curveGeometry = SemCurveGeometry.Create(curve);
//Clip angle 1 properties
//Identification
var angleIdentity1 = SemPieceIdentity.Create("indMark006", "pieceMark006", "prelimMark006", "barcode123456896", false);
angleIdentity1.AssignTo(angle);
//Status
var pSetStAngle01 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusAngle01 = SemStatus.Create(pSetStAngle01, "ReadyForProcurement", "Default", false);
statusAngle01.AssignTo(angle);
//Version
var pSetVrAngle01 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAngle01 = SemVersion.Create(pSetVrAngle01, "versionAngle001");
versionAngle01.AssignTo(angle);
//Tolerance
var pSetLyAngle01 = SemPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceAngle01 = SemLayoutTolerance.Create(pSetLyAngle01, 0.01);
toleranceAngle01.AssignTo(angle);
//Quantity
var qAngle = SemQuantityRequired.Create();
qAngle.Add(angle);
//Material
var pSetMat3 = SemPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialAngle = SemMaterial.Create("ASTM A992", pSetMat3, "materialID003",
"materialCert003", "materialGrade003", "materialType003");
materialAngle.AssociateTo(angle);
//Finish/treatment
var paintAngle = PaintFinish.Create();
angle.AddPaintFinish(paintAngle);
var pSetSTAngle01 = SemPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAnglePset = SemSurfaceTreatmentProperty.Create(pSetSTAngle01, new List <string> {
"Galvanized"
});
paintAnglePset.AssignTo(angle);
//Feature
//DrillHoles.Create(angle, Coordinate2D.Create(100, -5), 15, HoleLocation.Bottom, false);
//DrillHoles.Create(angle, Coordinate2D.Create(300, 10), 20, HoleLocation.Bottom, false);
var bHoleAngle01 = SemDrillHoles.Create(angle, SemCoordinate2D.Create(80, 9.5), 15, SemHoleLocation.Right, false);
var bHoleAngle02 = SemDrillHoles.Create(angle, SemCoordinate2D.Create(280, 9.5), 20, SemHoleLocation.Right, false);
//Clip Angle1 Bolt Hole properties
var pSetAngleBH01 = SemPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleAnglePset1 = SemBoltHoleProperties.Create(pSetAngleBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 30, false, 0);
boltHoleAnglePset1.AssignTo(bHoleAngle01);
boltHoleAnglePset1.AssignTo(bHoleAngle02);
var derived = SemDerivedProfile.Create(aProfile, true, true);
var angle2 = SemClipAngle.Create("a00103",
"angle", derived, 360,
//SemCoordinate3D.Create(5898.5, -90.3, -180 - 254),
SemCoordinate3D.Create(-90.3, -180, 5898.5),
//SemDirection3D.ZAxis, SemDirection3D.XAxis,
SemDirection3D.YAxis, SemDirection3D.Axis,
mainPart);
//Clip angle 2 properties
//Identification
var angleIdentity2 = SemPieceIdentity.Create("indMark007", "pieceMark007", "prelimMark007", "barcode123456897", false);
angleIdentity2.AssignTo(angle2);
//Status
statusAngle01.AssignTo(angle2);
//Version
versionAngle01.AssignTo(angle2);
//Tolerance
toleranceAngle01.AssignTo(angle2);
//Quantity
qAngle.Add(angle2);
//Material
materialAngle.AssociateTo(angle2);
//Finish/treatment
angle2.AddPaintFinish(paintAngle);
//paintAnglePset.AssignTo(angle2);
//DrillHoles.Create(angle2, Coordinate2D.Create(100, -5), 15, HoleLocation.Top, false);
//DrillHoles.Create(angle2, Coordinate2D.Create(300, 10), 20, HoleLocation.Top, false);
var bHoleAngle03 = SemDrillHoles.Create(angle2, SemCoordinate2D.Create(80, -9.5), 15, SemHoleLocation.Right, false);
var bHoleAngle04 = SemDrillHoles.Create(angle2, SemCoordinate2D.Create(280, -9.5), 20, SemHoleLocation.Right, false);
//Clip Angle2 Bolt Hole properties
boltHoleAnglePset1.AssignTo(bHoleAngle03);
boltHoleAnglePset1.AssignTo(bHoleAngle04);
var w1 = SemWeld.Create(mainPart, angle);
//var w1 = SemWeld.Create("Tee Joint", mainPart, angle);
//var w2 = Weld.Create("Tee Joint", mainPart, angle2);
w1.AddWeldingPath(curveGeometry, SemCoordinate3D.Create(0.0, 0.0, 0.0));
var pSetw1 = SemPropertySet.Create(@"AISC_EM11_Pset_Weld");
w1.AddProperties(pSetw1, "weld id", "weld description", "wps code", "category", "weld grade", 100, false);
w1.AddProperties(pSetw1, "weld type1", "weld type2", "weld surface1", "weld surface 2", 123, "weld process",
1, 2, 3, 4, 5, 6, 7, 8, false, false);
pSetw1.AssignTo(w1);
var wc000 = SemCoordinate3D.Create(5898.5, 0, 0);
var wc001 = SemCoordinate3D.Create(5898.5, 0, 200);
var ccurve = SemPolyline3D.Create(new SemCoordinate3D[] { wc000, wc001 });
var ccurveGeometry = SemCurveGeometry.Create(ccurve);
var boltAss = SemBoltAssembly.Create(mainPart, angle, ccurveGeometry, SemCoordinate3D.Create(1200, 60, 0));
var nut = SemNut.Create(boltAss);
var nutPSetw1 = SemPropertySet.Create(@"AISC_EM11_Pset_Nut");
nut.AddProperties(nutPSetw1, "nut standard", "nut type", 5, 3, false);
nutPSetw1.AssignTo(nut);
var washer1 = SemWasher.Create(boltAss);
var washerPSetw1 = SemPropertySet.Create(@"AISC_EM11_Pset_Washer");
nut.AddProperties(washerPSetw1, "washer standard", "washer type", 5, 2, false);
washerPSetw1.AssignTo(washer1);
var washer2 = SemWasher.Create(boltAss);
var washerPSetw2 = SemPropertySet.Create(@"AISC_EM11_Pset_Washer");
nut.AddProperties(washerPSetw2, "washer standard", "washer type", 5, 1, true);
washerPSetw2.AssignTo(washer2);
//w1.AddProperties();
//var wtype = SemWeldType.Create("Tee Joint", "tj0001");
//wtype.Defines(w1);
//wtype.Defines(w2);
////var derived2 = DerivedProfile.Create(aProfile, true, false);
////var angle3 = SteelPiece.Create("a00104",
//// "angle", derived2, 400,
//// Coordinate3D.Create(101.5, -90.3, -200 - 254), Direction3D.ZAxis, Direction3D.XAxis, assembly,
//// typeof(IfcDiscreteAccessory));
//////DrillHoles.Create(angle3, Coordinate2D.Create(100, 5), 15, HoleLocation.Top, false);
//////DrillHoles.Create(angle3, Coordinate2D.Create(300, 5), 15, HoleLocation.Top, false);
////DrillHoles.Create(angle3, Coordinate2D.Create(100, -10), 15, HoleLocation.Left, false);
////DrillHoles.Create(angle3, Coordinate2D.Create(300, -10), 15, HoleLocation.Left, false);
////var angle4 = SteelPiece.Create("a00105",
//// "angle", aProfile, 400,
//// Coordinate3D.Create(101.5, 90.3, -200 - 254), Direction3D.ZAxis, Direction3D.XAxis, assembly,
//// typeof(IfcDiscreteAccessory));
//////DrillHoles.Create(angle4, Coordinate2D.Create(100, 5), 15, HoleLocation.Bottom, false);
//////DrillHoles.Create(angle4, Coordinate2D.Create(300, 5), 15, HoleLocation.Bottom, false);
////DrillHoles.Create(angle4, Coordinate2D.Create(100, 10), 15, HoleLocation.Left, false);
////DrillHoles.Create(angle4, Coordinate2D.Create(300, 10), 15, HoleLocation.Left, false);
//Clip angle for column2----------------------------------------------------------------------------------
var derived3 = SemDerivedProfile.Create(aProfile, true, false);
var angle3 = SemClipAngle.Create(
"a00103",
"angle",
derived3, 360,
SemCoordinate3D.Create(-90.3, -180, 5898.5 - 5798.5),
SemDirection3D.YAxis, SemDirection3D.Axis,
mainPart
);
//Clip angle 3 properties
//Identification
var angleIdentity3 = SemPieceIdentity.Create("indMark008", "pieceMark008", "prelimMark008", "barcode123456898", false);
angleIdentity3.AssignTo(angle3);
//Status
statusAngle01.AssignTo(angle3);
//Version
versionAngle01.AssignTo(angle3);
//Tolerance
toleranceAngle01.AssignTo(angle3);
//Quantity
qAngle.Add(angle3);
//Material
materialAngle.AssociateTo(angle3);
//Finish/treatment
angle3.AddPaintFinish(paintAngle);
//paintAnglePset.AssignTo(angle3);
var bHoleAngle05 = SemDrillHoles.Create(angle3, SemCoordinate2D.Create(80, -10), 15, SemHoleLocation.Left, false);
var bHoleAngle06 = SemDrillHoles.Create(angle3, SemCoordinate2D.Create(280, -10), 15, SemHoleLocation.Left, false);
//Clip Angle3 Bolt Hole properties
boltHoleAnglePset1.AssignTo(bHoleAngle05);
boltHoleAnglePset1.AssignTo(bHoleAngle06);
var derived4 = SemDerivedProfile.Create(aProfile, false, false);
var angle4 = SemClipAngle.Create(
"a00104",
"angle",
derived4, 360,
SemCoordinate3D.Create(90.3, -180, 5898.5 - 5798.5),
SemDirection3D.YAxis, SemDirection3D.Axis,
mainPart
);
//Clip angle 4 properties
//Identification
var angleIdentity4 = SemPieceIdentity.Create("indMark009", "pieceMark009", "prelimMark009", "barcode123456899", false);
angleIdentity4.AssignTo(angle4);
//Status
statusAngle01.AssignTo(angle4);
//Version
versionAngle01.AssignTo(angle4);
//Tolerance
toleranceAngle01.AssignTo(angle4);
//Quantity
qAngle.Add(angle4);
//Material
materialAngle.AssociateTo(angle4);
//Finish/treatment
angle4.AddPaintFinish(paintAngle);
//paintAnglePset.AssignTo(angle4);
var bHoleAngle07 = SemDrillHoles.Create(angle4, SemCoordinate2D.Create(80, 10), 15, SemHoleLocation.Left, false);
var bHoleAngle08 = SemDrillHoles.Create(angle4, SemCoordinate2D.Create(280, 10), 15, SemHoleLocation.Left, false);
boltHoleAnglePset1.AssignTo(bHoleAngle07);
boltHoleAnglePset1.AssignTo(bHoleAngle08);
// welding column 2 & beam with angle 3,4//DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
// Assembly 2- Column1-------------------------------------------------------------------------------------
var assembly2 = SemAssembly.Create(
"assid003",
"Steel Assembly",
"ASS02", "client_marker2",
"prelim_marker2",
"ship_mark2",
"202301123433",
floor,
SemCoordinate3D.Create(6014.3, 0, 0),
SemDirection3D.ZAxis,
SemDirection3D.XAxis);
// assembly 2 properties
//Quantity
var qAssemCol1 = SemQuantityRequired.Create();
qAssemCol1.Add(assembly2);
//Finish/tearment
var paintAssem2 = PaintFinish.Create();
assembly2.AddPaintFinish(paintAssem2);
var pSetAssemSTr02 = SemPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAssem2Pset = SemSurfaceTreatmentProperty.Create(pSetAssemSTr02, new List <string> {
"Galvanized"
});
paintAssem2Pset.AssignTo(assembly2);
//Scheduling
var pSetAssemSc02 = SemPropertySet.Create(@"AISC_EM11_Pset_Schedule");
var AssemSch02 = SemSchedule.Create(pSetAssemSc02, "seq01", "seqLevel 01", DateTime.Now);
AssemSch02.AssignTo(assembly2);
//Status
var pSetAssemSt02 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var AssemStat02 = SemStatus.Create(pSetAssemSt02, "Default", "Default", true);
AssemStat02.AssignTo(assembly2);
//Drawing number
var pSetAssemDN02 = SemPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem2Pset = SemDrawingNumber.Create(pSetAssemDN02, new List <string> {
"DR001PH1006", "DR001PH1005"
});
DnumberAssem2Pset.AssignTo(assembly2);
//Version
var pSetAssemVr02 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAssem02 = SemVersion.Create(pSetAssemVr02, "versionAssem02");
versionAssem02.AssignTo(assembly2);
//Main Piece 2- Column1
var mainPart2 = SemMainPiece.Create(
"c00102",
"main piece",
profile, 6000,
SemCoordinate3D.Origin,
SemDirection3D.ZAxis,
SemDirection3D.XAxis,
assembly2);
// Column1 properties
//Identification
var pieceIdCol01 = SemPieceIdentity.Create("indMark010", "pieceMark010", "prelimMark010", "barcode123456880", true);
pieceIdCol01.AssignTo(mainPart2);
//Status
var pSetColSt01 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusCol01 = SemStatus.Create(pSetColSt01, "ReadyForProcurement", "Default", true);
statusCol01.AssignTo(mainPart2);
//Version
var pSetColVr01 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionCol01 = SemVersion.Create(pSetColVr01, "versionCol001");
versionCol01.AssignTo(mainPart2);
//Tolerance
var pSetColLy01 = SemPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceCol01 = SemLayoutTolerance.Create(pSetColLy01, 0.002);
toleranceCol01.AssignTo(mainPart2);
//Quantity
var qPieceCol = SemQuantityRequired.Create();
qPieceCol.Add(mainPart2);
//Material
var pSetMat4 = SemPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialCol1 = SemMaterial.Create("ASTM A992", pSetMat4, "materialID004",
"materialCert004", "materialGrade004", "materialType004");
materialCol1.AssociateTo(mainPart2);
//Finish/treatment
var paintCol1 = PaintFinish.Create();
mainPart2.AddPaintFinish(paintCol1);
var pSetColST01 = SemPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintColPset = SemSurfaceTreatmentProperty.Create(pSetColST01, new List <string> {
"Blast"
});
paintColPset.AssignTo(mainPart2);
//Castellation
//var pSetCt02 = SemPropertySet.Create(@"AISC_EM11_Pset_Castellation");
//var castellation2 = SemCastellation.Create(pSetCt02, "Circular", 0.002, 0.002, 0.001, 0.002, 0.01, 0.001);
//castellation2.AssignTo(mainPart2);
//Features
var bHoleCol01 = SemDrillHoles.Create(mainPart2, SemCoordinate2D.Create(6000 - 508 / 2 - 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol02 = SemDrillHoles.Create(mainPart2, SemCoordinate2D.Create(6000 - 508 / 2 + 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol03 = SemDrillHoles.Create(mainPart2, SemCoordinate2D.Create(6000 - 508 / 2 - 100, -100), 15, SemHoleLocation.Web,
false);
var bHoleCol04 = SemDrillHoles.Create(mainPart2, SemCoordinate2D.Create(6000 - 508 / 2 + 100, -100), 15, SemHoleLocation.Web,
false);
var pSetColBH01 = SemPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleColPset1 = SemBoltHoleProperties.Create(pSetColBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 20, false, 0);
boltHoleColPset1.AssignTo(bHoleCol01);
boltHoleColPset1.AssignTo(bHoleCol02);
boltHoleColPset1.AssignTo(bHoleCol03);
boltHoleColPset1.AssignTo(bHoleCol04);
SemSlottedHole.Create(mainPart2, SemCoordinate2D.Create(5000, 50), 100, 30, SemDirection2D.Create(0.9, 0.3),
SemHoleLocation.Web, true);
//Slotted Hole properties
// welding colum 1 with angle//DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
SemConnectedElements.Create(assembly, assembly2);
///////////////////////////////////////////weld
//var wp = SemWeldProperties.Create(10, 14);
//wp.AssignTo(w1);
//wp.AssignTo(w2);
// Assembly 3- Column2----------------------------------------------------------------------------------------
var assembly3 = SemAssembly.Create(
"assid003", "Steel Assembly", "ASS02", "client_marker3", "prelim_marker3", "ship_mark3", "302301123425",
floor,
SemCoordinate3D.Create(-14.3, 0, 0), SemDirection3D.ZAxis, SemDirection3D.XAxis);
// Assembly 3 properties
//Quantity
qAssemCol1.Add(assembly3);
//Finish/tearment
assembly3.AddPaintFinish(paintAssem2);
//paintAssem2Pset.AssignTo(assembly3);
//Scheduling
AssemSch02.AssignTo(assembly3);
//Status
AssemStat02.AssignTo(assembly3);
//Drawing number
var pSetAssemDN03 = SemPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem3Pset = SemDrawingNumber.Create(pSetAssemDN03, new List <string> {
"DR001PH1006", "DR001PH1005", "DR001PH1008"
});
DnumberAssem3Pset.AssignTo(assembly3);
//Version
versionAssem02.AssignTo(assembly3);
//Main Piece 3- Column 2
var mainPart3 = SemMainPiece.Create("c20010",
"main piece", profile, 6000,
SemCoordinate3D.Origin, SemDirection3D.ZAxis, SemDirection3D.XAxis, assembly3);
//Column2 properties
//Identification
var pieceIdCol02 = SemPieceIdentity.Create("indMark011", "pieceMark011", "prelimMark011", "barcode123456881", true);
pieceIdCol02.AssignTo(mainPart3);
//Status
var pSetColSt02 = SemPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusCol02 = SemStatus.Create(pSetColSt02, "ReadyForMill", "Default", true);
statusCol02.AssignTo(mainPart3);
//Version
var pSetColVr02 = SemPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionCol02 = SemVersion.Create(pSetColVr02, "versionCol002");
versionCol02.AssignTo(mainPart3);
//Tolerance
toleranceCol01.AssignTo(mainPart3);
//Quantity
qPieceCol.Add(mainPart3);
//Material
materialCol1.AssociateTo(mainPart3);
//Finish/treatment
mainPart3.AddPaintFinish(paintCol1);
//paintColPset.AssignTo(mainPart3);
//Castellation- not required
//var pSetCt02 = SemPropertySet.Create(@"AISC_EM11_Pset_Castellation");
//var castellation2 = SemCastellation.Create(pSetCt02, "Circular", 0.002, 0.002, 0.001, 0.002, 0.01, 0.001);
//castellation2.AssignTo(mainPart2);
// Column2 features
var bHoleCol05 = SemDrillHoles.Create(mainPart3, SemCoordinate2D.Create(6000 - 508 / 2 - 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol06 = SemDrillHoles.Create(mainPart3, SemCoordinate2D.Create(6000 - 508 / 2 + 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol07 = SemDrillHoles.Create(mainPart3, SemCoordinate2D.Create(6000 - 508 / 2 - 100, -100), 15, SemHoleLocation.Web,
false);
var bHoleCol08 = SemDrillHoles.Create(mainPart3, SemCoordinate2D.Create(6000 - 508 / 2 + 100, -100), 15, SemHoleLocation.Web,
false);
boltHoleColPset1.AssignTo(bHoleCol05);
boltHoleColPset1.AssignTo(bHoleCol06);
boltHoleColPset1.AssignTo(bHoleCol07);
boltHoleColPset1.AssignTo(bHoleCol08);
return(SemInstanceDB.Write(filename));
}