public static ArraySimulationStepInput FromJson(JsonSpec spec, Mesh mesh, Bitmap texture)
{
ArraySimulationStepInput input = new ArraySimulationStepInput();
input.Heading = DegToRad(spec.Environment.HeadingDeg);
input.IndirectIrradiance = spec.Environment.IndirectIrradianceWM2;
input.Irradiance = spec.Environment.IrradianceWM2;
input.Latitude = spec.Environment.LatitudeDeg;
input.Longitude = spec.Environment.LongitudeDeg;
input.Temperature = spec.Environment.TemperatureC;
input.Tilt = DegToRad(spec.Environment.TiltDeg);
input.TimezoneOffsetHours = spec.Environment.TimezoneOffsetHours;
input.Utc = spec.Environment.Utc;
input.Array = new ArraySpec();
input.Array.BypassDiodeSpec.VoltageDrop = spec.Array.BypassDiode.VoltageDrop;
input.Array.CellSpec.Area = spec.Array.Cell.AreaM2;
input.Array.CellSpec.DIscDT = spec.Array.Cell.DIscDT;
input.Array.CellSpec.DVocDT = spec.Array.Cell.DVocDT;
input.Array.CellSpec.IscStc = spec.Array.Cell.IscStc;
input.Array.CellSpec.NIdeal = spec.Array.Cell.NIdeal;
input.Array.CellSpec.SeriesR = spec.Array.Cell.SeriesR;
input.Array.CellSpec.VocStc = spec.Array.Cell.VocStc;
input.Array.EncapsulationLoss = spec.Array.EncapsulationLoss;
input.Array.LayoutBounds = FromJson(spec.Array.LayoutBounds);
input.Array.Mesh = mesh;
input.Array.LayoutTexture = texture;
input.Array.ReadStringsFromColors();
return input;
}
/// <summary>
/// If two mesh points have the same (X, Y, Z) coords, then they get combined into one.
/// </summary>
public static Mesh JoinVertices(Mesh mesh)
{
Dictionary<Vector3, int> pointIxMap = new Dictionary<Vector3, int>();
List<Vector3> points = new List<Vector3>();
List<Vector3> norms = new List<Vector3>();
for (int i = 0; i < mesh.points.Length; i++) {
if (!pointIxMap.ContainsKey(mesh.points[i])) {
points.Add(mesh.points[i]);
norms.Add(mesh.normals[i]);
pointIxMap.Add(mesh.points[i], points.Count-1);
}
}
Logger.info("mesh has " + mesh.points.Length + " verts, "+
"joined " + (mesh.points.Length - pointIxMap.Count) + " dupes");
List<Mesh.Triangle> tris = new List<Mesh.Triangle>();
for (int i = 0; i < mesh.triangles.Length; i++) {
var oldTri = mesh.triangles[i];
var tri = new Mesh.Triangle(
pointIxMap[mesh.points[oldTri.vertexA]],
pointIxMap[mesh.points[oldTri.vertexB]],
pointIxMap[mesh.points[oldTri.vertexC]]);
if (tri.vertexA != tri.vertexB && tri.vertexA != tri.vertexC && tri.vertexB != tri.vertexC) {
tris.Add(tri);
}
}
return new Mesh(points.ToArray(), norms.ToArray(), tris.ToArray());
}
public static Mesh MirrorAndCombine(Mesh mesh, Vector3 axis)
{
/* if the current mesh has n points, we'll have up to 2n-1 points in the mirrored and combined one */
var points = new List<Vector3>();
points.AddRange(mesh.points);
/* find the point or points we're going to mirror around--the ones closest in the 'axis' direction
* (in other words, find the mirror plane) */
var minDot = mesh.points.Min(point => Vector3.Dot(point, axis));
/* if points are this close or closer to the mirror plane, they will not be duplicated--they will simply be shared by additional triangles */
var epsilon = 0.002f;
/* create a dictionary mapping point indices in the original mesh to the corresponding mirrored points */
var pointIndexMap = new Dictionary<int, int>();
for (int i = 0; i < mesh.points.Length; i++) {
var distance = Vector3.Dot(mesh.points[i], axis) - minDot;
if (distance < epsilon) {
/* point lies on mirror plane */
pointIndexMap.Add(i, i);
} else {
/* point is not on mirror plane; create its mirror image as a new point */
pointIndexMap.Add(i, points.Count);
var mirrorPoint = mesh.points[i] - 2 * distance * axis;
points.Add(mirrorPoint);
}
}
/* normals correspond to points, but may need to be mirrored.
* if a point is on the mirror plane, make sure the corresponding normal is in the mirror plane
*/
var normals = new Vector3[points.Count];
for (int i = 0; i < mesh.points.Length; i++) {
if (pointIndexMap[i] == i) {
normals[i] = mesh.normals[i] - Vector3.Dot(mesh.normals[i], axis) * axis;
normals[i].Normalize();
} else {
normals[i] = mesh.normals[i];
normals[pointIndexMap[i]] = mesh.normals[i] - 2 * Vector3.Dot(mesh.normals[i], axis) * axis;
}
}
/* triangles are simply duplicated--each triangle gets a mirror image */
var triangles = new Mesh.Triangle[mesh.triangles.Length * 2];
for (int i = 0; i < mesh.triangles.Length; i++) {
triangles[i] = mesh.triangles[i];
}
for (int i = 0; i < mesh.triangles.Length; i++) {
var triangle = mesh.triangles[i];
triangles[mesh.triangles.Length + i] = new Mesh.Triangle(
pointIndexMap[triangle.vertexA],
pointIndexMap[triangle.vertexB],
pointIndexMap[triangle.vertexC]
);
}
return new Mesh(points.ToArray(), normals, triangles);
}
/// <summary>
/// Returns a depth t such that position + direction*t = a point in triangle. Note that this may be a positive or negative number.
/// Returns NaN if the ray does not intersect the triangle or if direction is the zero vector.
/// </summary>
public float Intersect(Mesh.Triangle triangle, Vector3 position, Vector3 direction)
{
//transform coords so that position=0, triangle = (v1, v2, v3)
// find a b c such that
// a*v1x + b*v1y + c*v1z = 1
// a*v2x + b*v2y + c*v2z = 1
// a*v3x + b*v3y + c*v3z = 1
// (v1 v2 v3)T(a b c)T = (1 1 1)
// (a b c) = (v1 v2 v3)T^-1 (1 1 1)
var m = new Matrix3(
Mesh.points[triangle.vertexA],
Mesh.points[triangle.vertexB],
Mesh.points[triangle.vertexC]);
m.Transpose();
var inv = m.Inverse;
var abc = inv * new Vector3(1, 1, 1);
//(p + t*d) dot (a b c) = 1
//p dot (a b c) + t*d dot (a b c) = 1
//t = (1 - p dot (a b c)) / (d dot (a b c))
var t = (1f - Vector3.Dot(position, abc)) / Vector3.Dot(direction, abc);
var intersection = position + direction * t;
//next, find the intersection
//i = p + t*d
//ap*v1 + bp*v2 + cp*v3 = i
//(ap bp cp) = (v1 v2 v3)T^-1 (1 1 1)
var abcPrime = inv * intersection;
//if any of the components (ap bp cp) is outside of [0, 1],
//then the ray does not intersect the triangle
if (abcPrime.X < 0 || abcPrime.X > 1)
return float.NaN;
if (abcPrime.Y < 0 || abcPrime.Y > 1)
return float.NaN;
if (abcPrime.Z < 0 || abcPrime.Z > 1)
return float.NaN;
return t;
}
/// <summary>
/// Uses the given mesh for rendering and calculation.
///
/// Computes shadow volumes for rendering.
/// </summary>
private void SetModel(Mesh mesh)
{
// create shadow volumes
Logger.info("computing shadows...");
Shadow newShadow = new Shadow(mesh);
newShadow.Initialize(); // make sure init works before setting shadow
shadow = newShadow;
// render them
ShadowMeshSprite shadowSprite = new ShadowMeshSprite(shadow);
var center = (mesh.BoundingBox.Max + mesh.BoundingBox.Min) / 2;
shadowSprite.Position = new Vector4(-center, 1);
glControl.Sprite = shadowSprite;
simInput.Array.Mesh = mesh;
}
public ShadowVolume(Mesh mesh, Vector4 lightSource)
{
this.Mesh = mesh;
this.LightSource = lightSource;
SilhouettePoints = new List<int>();
}
public void Parse(string filename)
{
var verts = new List<Vector3>();
var tris = new List<Mesh.Triangle>();
var norms = new List<Vector3>();
//deduplicate the verts...
var vertIxs = new Dictionary<Vector3, int>();
// parse the file with a simple state machine
const int INIT = 1, SOLID = 2, FACET = 3, LOOP = 4, ENDFACET=5;
var triIxs = new List<int>();
var norm = new Vector3();
int state = INIT;
StreamReader reader = new StreamReader(filename);
String line;
for (int lineNum = 1; (line = reader.ReadLine()) != null; lineNum++) {
string[] parts = line.Trim().ToLower().Split(new char[0], StringSplitOptions.RemoveEmptyEntries);
if (parts.Length == 0) {
// skip empty lines
continue;
}
if (parts[0] == "solid") {
Assert(state == INIT, filename, lineNum);
Logger.info("reading stl solid " + String.Join(" ", parts, 1, parts.Length - 1));
state = SOLID;
} else if (parts[0] == "facet") {
Assert(state == SOLID, filename, lineNum);
Assert(parts[1] == "normal", filename, lineNum);
norm = ReadVector(parts, 2, filename, lineNum);
state = FACET;
} else if (parts[0] == "outer") {
Assert(state == FACET, filename, lineNum);
Assert(parts[1] == "loop", filename, lineNum);
triIxs.Clear();
state = LOOP;
} else if (parts[0] == "vertex") {
Assert(state == LOOP, filename, lineNum);
var vertex = ReadVector(parts, 1, filename, lineNum);
if (vertIxs.ContainsKey(vertex)) {
int vertIx = vertIxs[vertex];
triIxs.Add(vertIx);
norms[vertIx] += norm;
} else {
int vertIx = verts.Count;
vertIxs.Add(vertex, vertIx);
triIxs.Add(vertIx);
verts.Add(vertex);
norms.Add(norm);
}
} else if (parts[0] == "endloop") {
Assert(state == LOOP, filename, lineNum);
//every face must be a triangle
Assert(triIxs.Count == 3, filename, lineNum);
var tri = new Mesh.Triangle(triIxs[0], triIxs[1], triIxs[2]);
tri.normal = norm;
tris.Add(tri);
state = ENDFACET;
} else if (parts[0] == "endfacet") {
Assert(state == ENDFACET, filename, lineNum);
state = SOLID;
} else if (parts[0] == "endsolid") {
Assert(state == SOLID, filename, lineNum);
state = INIT;
}
}
// get all the averaged vertex normals and set them to unit length
for(int i = 0; i < norms.Count; i++){
float len = norms[i].Length;
if (len == 0) {
norms[i] = new Vector3(1, 0, 0);
} else {
norms[i] /= len;
}
}
// finally, return a mesh
mesh = new Mesh(verts.ToArray(), norms.ToArray(), tris.ToArray());
}
public static void Split(Mesh input, IVolume volume,
out Mesh output, out bool[] trisInside)
{
/**
*
* for triangle in input
* if triangle is entirely inside or outside
* add to corresponding mesh
* else split triangle into 4 pieces.
* three go in one mesh, one goes into the other
*
* Splitting a triangle, Before:
*
* * vA
* / \
* boundary --- /---\ ---
* / \
* vB1 *-------* vB2
*
*
* After:
*
* * vA
* vMid1 / \ vMid2
* boundary --- *---* ---
* / \ / \
* vB1 *---*---* vB2
* vMidB
*
**/
int np = input.points.Length, nt = input.triangles.Length;
List<Vector3> points = input.points.ToList();
List<Vector3> norms = input.normals.ToList();
List<Mesh.Triangle> tris = new List<Mesh.Triangle>();
List<bool> trisIn = new List<bool>();
for(int i = 0; i < nt; i++){
var tri = input.triangles[i];
Vector3 vA = input.points[tri.vertexA];
Vector3 vB = input.points[tri.vertexB];
Vector3 vC = input.points[tri.vertexC];
int ncontains =
(volume.Contains(vA) ? 1 : 0) +
(volume.Contains(vB) ? 1 : 0) +
(volume.Contains(vC) ? 1 : 0);
if (ncontains==3) {
tris.Add(tri);
trisIn.Add(true);
} else if (ncontains==0){
tris.Add(tri);
trisIn.Add(false);
} else {
// see comment above for explanation
Debug.Assert(ncontains == 1 || ncontains == 2);
bool containsA = (ncontains==1);
int ixA, ixB1, ixB2;
if (volume.Contains(vA) == containsA) {
ixA = tri.vertexA;
ixB1 = tri.vertexB;
ixB2 = tri.vertexC;
} else if (volume.Contains(vB) == containsA) {
ixA = tri.vertexB;
ixB1 = tri.vertexA;
ixB2 = tri.vertexC;
} else {
Debug.Assert(volume.Contains(vC) == containsA);
ixA = tri.vertexC;
ixB1 = tri.vertexA;
ixB2 = tri.vertexB;
}
Vector3 vAO = input.points[ixA];
Vector3 vB1 = input.points[ixB1];
Vector3 vB2 = input.points[ixB2];
Vector3 vMid1 = FindBoundary(vAO, vB1, volume);
Vector3 vMid2 = FindBoundary(vAO, vB2, volume);
Vector3 vMidB = input.points[ixB1]*0.5f + input.points[ixB2]*0.5f;
points.Add(vMid1); points.Add(vMid2); points.Add(vMidB);
float b1 = (vMid1 - vAO).Length / ((vB1 - vAO).Length + float.Epsilon);
float b2 = (vMid2 - vAO).Length / ((vB2 - vAO).Length + float.Epsilon);
Debug.Assert(0 <= b1 && b1 <= 1 && 0 <= b2 && b2 <= 1);
Vector3 nMid1 = input.normals[ixA] * (1 - b1) + input.normals[ixB1] * b1;
Vector3 nMid2 = input.normals[ixA] * (1 - b2) + input.normals[ixB2] * b2;
Vector3 nMidB = input.normals[ixB1] * 0.5f + input.normals[ixB2] * 0.5f;
nMid1.Normalize(); nMid2.Normalize(); nMidB.Normalize();
norms.Add(nMid1); norms.Add(nMid2); norms.Add(nMidB);
//norms.Add(input.normals[ixA]); norms.Add(input.normals[ixA]); norms.Add(input.normals[ixA]);
var tri1 = new Mesh.Triangle(ixA, points.Count - 3, points.Count - 2);
var tri2 = new Mesh.Triangle(ixB1, points.Count - 3, points.Count - 1);
var tri3 = new Mesh.Triangle(points.Count - 3, points.Count - 2, points.Count - 1);
var tri4 = new Mesh.Triangle(ixB2, points.Count - 2, points.Count - 1);
tri1.normal = tri2.normal = tri3.normal = tri4.normal = tri.normal;
tris.Add(tri1); tris.Add(tri2); tris.Add(tri3); tris.Add(tri4);
trisIn.Add(containsA);
trisIn.Add(!containsA);
trisIn.Add(!containsA);
trisIn.Add(!containsA);
}
}
// done
Logger.info("split mesh, started with " + nt + " tris, added " + (tris.Count-nt));
Debug.Assert(points.Count==norms.Count);
output = new Mesh(points.ToArray(), norms.ToArray(), tris.ToArray());
trisInside = trisIn.ToArray();
}
public static Mesh Scale(Mesh mesh, float p)
{
Vector3[] newPoints = new Vector3[mesh.points.Length];
for (int i = 0; i < mesh.points.Length; i++)
{
newPoints[i] = p * mesh.points[i];
}
return new Mesh(newPoints, mesh.normals, mesh.triangles);
}
public void Parse(string filename)
{
/* load file */
XmlDocument doc = new XmlDocument();
doc.Load(filename);
/* parse file */
var points = new List<Vector3>();
var normals = new List<Vector3>();
var triangles = new List<Mesh.Triangle>();
//TODO: disgusting hack.
//XmlNodeList xmlSurfaces; = doc.FirstChild.SelectNodes(
//"//GeometricRepresentationSet/Representation/AssociatedXML/Rep");
XmlNode rep;
if (doc["XMLRepresentation"] != null &&
doc["XMLRepresentation"]["Root"] != null
&& doc["XMLRepresentation"]["Root"]["Rep"] != null) {
rep = doc["XMLRepresentation"]["Root"]["Rep"];
} else if (doc["Model_3dxml"] != null
&& doc["Model_3dxml"]["GeometricRepresentationSet"] != null
&& doc["Model_3dxml"]["GeometricRepresentationSet"]["Representation"] != null
&& doc["Model_3dxml"]["GeometricRepresentationSet"]["Representation"]["AssociatedXML"] != null) {
rep = doc["Model_3dxml"]["GeometricRepresentationSet"]["Representation"]["AssociatedXML"];
} else {
throw new ArgumentException("cannot parse " + filename);
}
foreach (XmlNode node in rep.ChildNodes) {
if (node["VertexBuffer"] == null ||
node["VertexBuffer"]["Positions"] == null ||
node["VertexBuffer"]["Normals"] == null ||
node["Faces"]["Face"] == null) {
Logger.warn("skipping rep...");
continue;
}
//read verts
var units = 0.001f; /* units in mm */
var newPoints = Parse3DXMLVectors(node["VertexBuffer"]["Positions"].InnerText);
for (int i = 0; i < newPoints.Length; i++)
newPoints[i] = newPoints[i] * units;
var newNormals = Parse3DXMLVectors(node["VertexBuffer"]["Normals"].InnerText);
for (int i = 0; i < newNormals.Length; i++)
newNormals[i] = -newNormals[i];
int offset = points.Count;
points.AddRange(newPoints);
normals.AddRange(newNormals);
//read triangles
XmlAttributeCollection faceAttrs = node["Faces"]["Face"].Attributes;
Logger.info("parsing face " + faceAttrs["id"].Value);
if (faceAttrs["triangles"] != null) {
int[] vertIxs = Parse3DXMLInts(faceAttrs["triangles"].Value);
var triangleIxs = new HashSet<int>(vertIxs);
/*for (int i = 0; i < newPoints.Length - 2; i++)
{
if (triangleIxs.Contains(i))
{
triangles.Add(new MeshSprite.Triangle()
{
VertexA = offset + i,
VertexB = offset + i + 1,
VertexC = offset + i + 2
});
}
}*/
for (int i = 0; i < vertIxs.Length; i += 3) {
var tri = new Mesh.Triangle(
offset + vertIxs[i],
offset + vertIxs[i + 1],
offset + vertIxs[i + 2]
);
tri.normal = newNormals[vertIxs[i]];
triangles.Add(tri);
}
} else if (faceAttrs["strips"] != null) {
String[] strips = faceAttrs["strips"].Value.Split(',');
foreach (String strip in strips) {
int[] vertIxs = Parse3DXMLInts(strip);
for (int i = 2; i < vertIxs.Length; i++) {
var tri = new Mesh.Triangle(
offset + vertIxs[i - ((i % 2) == 0 ? 1 : 2)],
offset + vertIxs[i - ((i % 2) == 0 ? 2 : 1)],
offset + vertIxs[i]
);
tri.normal = newNormals[vertIxs[i]];
triangles.Add(tri);
}
}
} else {
throw new ArgumentException("Found an unsupported 3dxml mesh surface.\n" +
"Clean up your mesh in MeshLab. Triangles only.");
}
}
/* create mesh sprite */
mesh = new Mesh(points.ToArray(), normals.ToArray(), triangles.ToArray());
}
public Shadow(Mesh mesh)
{
this.Mesh = mesh;
this.SilhouetteEdges = new List<Pair<int>>();
}
private Vector3 ComputeNormal(Mesh.Triangle triangle)
{
var normal = Vector3.Cross(
Mesh.points[triangle.vertexB] - Mesh.points[triangle.vertexA],
Mesh.points[triangle.vertexC] - Mesh.points[triangle.vertexA]);
normal.Normalize();
return normal;
}
public MeshSprite(Mesh mesh)
{
Debug.Assert(mesh != null);
Mesh = mesh;
}