/// ------------------------------------------------------------------------------------
/// <summary>
/// Add a reference range to the list if there is one.
/// </summary>
/// ------------------------------------------------------------------------------------
private void AddRangeToList(ReferenceRange currentRange)
{
if (currentRange != null)
{
// If there were no chapters found, then assume chapter 1.
if (currentRange.StartChapter == 0)
{
currentRange.StartChapter = currentRange.EndChapter = 1;
}
m_referenceRangeList.Add(currentRange);
}
}
/// ------------------------------------------------------------------------------------
/// <summary>
/// Read the file to build mappings of the markers found
/// </summary>
/// ------------------------------------------------------------------------------------
protected void GetMappingsFromStream(TextReader reader)
{
string lineIn;
int chapter = -1;
int book = -1;
int lineCount = 0;
// book and chapter strings for reporting info in exceptions
string sBookId = null;
string sChapter = null;
string sVerse = null;
// Keep track of the first reference in the file
int firstBook = -1;
int firstChapter = -1;
int firstVerse = -1;
ReferenceRange currentRange = null;
string marker;
string lineText;
string nextLineText = null; // used for read-ahead for \fig line when doing strict scanning
while ((lineIn = reader.ReadLine()) != null)
{
lineCount++;
while (GetNextMarkerFromData(lineIn, out marker, out lineText))
{
// Make sure the marker is valid
if (!IsValidMarker(marker))
{
throw new ScriptureUtilsException(SUE_ErrorCode.InvalidCharacterInMarker,
FileName, lineCount, lineIn, sBookId, sChapter, sVerse);
}
ImportMappingInfo markerMapping = GetOrCreateMarkerMapping(ref marker);
if (marker == ScrMappingList.MarkerBook)
{
sBookId = lineText.TrimStart().ToUpperInvariant();
// save the book number in the list for this file
book = ScrReference.BookToNumber(sBookId);
if (book <= 0)
{
throw new ScriptureUtilsException(SUE_ErrorCode.InvalidBookID, FileName,
lineCount, lineIn, sBookId, null, null);
}
sBookId = ScrReference.NumberToBookCode(book);
// Make a new reference range with the book id and
// start it out with chapter range of 0-0.
AddRangeToList(currentRange);
currentRange = new ReferenceRange(book, 0, 0);
// If this is the first book, remember it
if (firstBook == -1)
{
firstBook = book;
}
m_booksInFile.Add(book);
chapter = -1;
}
else
{
// make sure that a book has been started before seeing any non-excluded markers
// This error is a "strict" error because files can be added by a user before there
// is a chance to exclude markers in the mappings. When the file is added from the settings
// for import, then strict checking will be on.
if (book == -1 && m_doStrictFileChecking)
{
// if the marker is not excluded then throw an error
if (markerMapping != null && !markerMapping.IsExcluded)
{
throw new ScriptureUtilsException(SUE_ErrorCode.UnexcludedDataBeforeIdLine,
FileName, lineCount, lineIn, null, null, null);
}
}
if (marker == ScrMappingList.MarkerChapter)
{
// If there is no book, then throw an error since chapter numbers
// are not valid without a book
if (book == -1)
{
throw new ScriptureUtilsException(SUE_ErrorCode.ChapterWithNoBook,
FileName, lineCount, lineIn, null, null, null);
}
try
{
sChapter = lineText;
chapter = ScrReference.ChapterToInt(sChapter);
// save the chapter number as the last chapter and possibly the first
// chapter number in the range.
if (currentRange.StartChapter == 0)
{
currentRange.StartChapter = chapter;
}
currentRange.EndChapter = chapter;
}
catch (ArgumentException)
{
throw new ScriptureUtilsException(SUE_ErrorCode.InvalidChapterNumber,
FileName, lineCount, lineIn, sBookId, sChapter, null);
}
// If this is the first chapter, remember it
if (firstChapter == -1)
{
firstChapter = chapter;
}
}
else if (marker == ScrMappingList.MarkerVerse)
{
// If a verse is seen without a book, throw an exception
if (book == -1)
{
throw new ScriptureUtilsException(SUE_ErrorCode.VerseWithNoBook,
FileName, lineCount, lineIn, sBookId, null, lineText);
}
BCVRef firstRef = new BCVRef(book, chapter, 0);
BCVRef lastRef = new BCVRef(book, chapter, 0);
// check for an invalid verse number
if (!BCVRef.VerseToScrRef(lineText, ref firstRef, ref lastRef) ||
firstRef.Verse == 0 || firstRef.Verse > lastRef.Verse)
{
throw new ScriptureUtilsException(SUE_ErrorCode.InvalidVerseNumber,
FileName, lineCount, lineIn, sBookId, sChapter, lineText);
}
// If a chapter number has not been seen yet, then throw an exception
sVerse = firstRef.Verse.ToString();
if (chapter == -1 && !SingleChapterBook(book))
{
throw new ScriptureUtilsException(SUE_ErrorCode.MissingChapterNumber,
FileName, lineCount, lineIn, sBookId, null, sVerse);
}
// If this is the first verse, remember it
if (firstVerse == -1)
{
firstVerse = firstRef.Verse;
}
}
else if (!markerMapping.IsExcluded && m_doStrictFileChecking &&
markerMapping.MappingTarget == MappingTargetType.Figure)
{
// First, we need to consider whether any following lines also need
// to be read in, since the Figure parameters could be split across
// lines. (TE-7669)
Debug.Assert(nextLineText == null);
int cExtraLinesRead = 0;
string sTempMarker, sTempLineText;
if (!GetNextMarkerFromData(lineText, out sTempMarker, out sTempLineText))
{
while ((nextLineText = reader.ReadLine()) != null)
{
cExtraLinesRead++;
if (GetNextMarkerFromData(nextLineText, out sTempMarker, out sTempLineText))
{
// Normally, we want to break the line right before the first marker.
int ichMarkerPos = nextLineText.IndexOf(sTempMarker);
// But if it's a \fig*, break after the marker.
if (sTempMarker == markerMapping.EndMarker)
{
ichMarkerPos += sTempMarker.Length;
}
lineText += " " + nextLineText.Substring(0, ichMarkerPos);
nextLineText = nextLineText.Substring(ichMarkerPos);
break;
}
else
{
lineText += " " + nextLineText;
}
}
}
string figureParams = lineText;
int endMarkerLength = 0;
// Validate the tokens for a mapping target (only in strict checking)
if (!String.IsNullOrEmpty(markerMapping.EndMarker))
{
endMarkerLength = markerMapping.EndMarker.Length;
int ichEnd = figureParams.IndexOf(markerMapping.EndMarker);
if (ichEnd >= 0)
{
figureParams = figureParams.Substring(0, ichEnd);
}
else
{
endMarkerLength = 0; // end marker is optional and not present
}
}
string[] tokens = figureParams.Split('|');
if (tokens.Length < 6)
{
throw new ScriptureUtilsException(SUE_ErrorCode.BadFigure, FileName,
lineCount, lineIn, sBookId, sChapter, sVerse);
}
lineText = lineText.Substring(figureParams.Length + endMarkerLength);
lineCount += cExtraLinesRead;
}
}
// Mark this mapping as "in-use" because it was found in the scanned file
markerMapping.SetIsInUse(m_domain, m_wsId, m_noteType, true);
if (m_scanInlineBackslashMarkers)
{
lineIn = lineText;
}
else
{
lineIn = nextLineText;
nextLineText = null;
if (lineIn == null)
{
break;
}
}
if (string.IsNullOrEmpty(lineIn) && !string.IsNullOrEmpty(nextLineText))
{
lineIn = nextLineText;
nextLineText = null;
}
}
}
// Add the last range to the list
AddRangeToList(currentRange);
// If no books were found in the file then throw an exception
if (book == -1)
{
throw new ScriptureUtilsException(SUE_ErrorCode.MissingBook,
FileName, lineCount, null, null, null, null);
}
// If no chapters were found then throw an exception
if (chapter == -1 && !SingleChapterBook(book))
{
throw new ScriptureUtilsException(SUE_ErrorCode.NoChapterNumber,
FileName, lineCount, null, sBookId, null, null);
}
// Store the first reference for the file
m_startRef.Book = firstBook;
m_startRef.Chapter = firstChapter == -1 ? 1 : firstChapter;
m_startRef.Verse = firstVerse == -1 ? 1 : firstVerse;
}
/// ------------------------------------------------------------------------------------
/// <summary>
/// Test CheckForOverlaps where the user elects to keep file 1 in the Overlapping Files
/// dialog
/// </summary>
/// ------------------------------------------------------------------------------------
private IScrImportFileInfo CreateStubFileInfo(DummyScrImportFileInfoFactory factory,
string name, ScrReference startRef, ReferenceRange refRange)
{
IScrImportFileInfo f = factory.Create(name, m_mappingList, ImportDomain.Main,
null, null, false);
f.Stub(x => x.IsReadable).Return(true);
f.Stub(x => x.IsStillReadable).Return(true);
f.Stub(x => x.StartRef).Return(startRef);
f.Stub(x => x.BookReferences).Return(new ReferenceRange[] { refRange });
return(f);
}
