protected double RealWidth(RepObj repObj)
{
if (repObj is RepRect)
{
RepRect repRect = (RepRect)repObj;
return(repRect.rWidth + repRect.penProp.rWidth);
}
else if (repObj is RepImage)
{
RepImage repImage = (RepImage)repObj;
if (Double.IsNaN(repImage.rWidth))
{
using (Image image = Image.FromStream(repImage.stream))
{
if (Double.IsNaN(repImage.rHeight))
{
repImage.rWidth = image.Width / image.HorizontalResolution * 72;
repImage.rHeight = image.Height / image.VerticalResolution * 72;
}
else
{
repImage.rWidth = image.Width * repImage.rHeight / image.Height;
}
}
}
return(repImage.rWidth);
}
else
{
return(repObj.rWidth);
}
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container.</summary>
/// <param name="repObj">Report object that must be added to the container</param>
/// <param name="repObj_Pos">The new report object will be inserted before the specified position.
/// If the position is null it will be appended to the end of the list.</param>
internal void Add(RepObj repObj, RepObj repObj_Pos)
{
if (repObj.container != null)
{
throw new ReportException("Report objects cannot be added to more than one container");
}
if (Object.ReferenceEquals(this, repObj))
{
throw new ReportException("Report objects cannot be added to itself");
}
if (repObj_Pos == null)
{
list_RepObj.Add(repObj);
}
else
{
if (!Object.ReferenceEquals(repObj_Pos.container, this))
{
throw new ReportException("The report object indicating the position is not a member of the container");
}
Int32 iIndex = list_RepObj.IndexOf(repObj_Pos);
Debug.Assert(iIndex >= 0);
list_RepObj.Insert(iIndex, repObj);
}
repObj.container = this;
repObj.OnAdded();
}
public void AddCentered(Double rY, RepObj repObj)
{
repObj.matrixD.rDX = rWidth / 2;
repObj.rAlignH = RepObj.rAlignCenter;
repObj.matrixD.rDY = rY;
Add(repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Applies the specified clipping path to this report object.</summary>
/// <param name="rX">X-coordinate of the clip path.</param>
/// <param name="rAlignH">Horizontal alignment of the report object relative to [X].</param>
/// <param name="rY">Y-coordinate of the clip path.</param>
/// <param name="rAlignV">Vertical alignment of the report object relative to [Y].</param>
/// <param name="repObj">The clipping path.</param>
public void SetClip(Double rX, Double rAlignH, Double rY, Double rAlignV, RepObj repObj)
{
this._clipPath = repObj;
this._clipPath.matrixD.rDX = rX;
this._clipPath.rAlignH = rAlignH;
this._clipPath.matrixD.rDY = rY;
this._clipPath.rAlignV = rAlignV;
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
public new void Add(Double rX, Double rY, RepObj repObj)
{
//Added By TechnoGuru - [email protected] - http://www.borie.org/
//Here we handle image comosed of severals images
if (repObj is RepImage)
{
#if !WindowsCE
RepImage repImage = repObj as RepImage;
using (Image image = Image.FromStream(repImage.stream))
{
if (image.RawFormat.Equals(ImageFormat.Tiff))
{
Guid objGuid = (image.FrameDimensionsList[0]);
System.Drawing.Imaging.FrameDimension objDimension = new System.Drawing.Imaging.FrameDimension(objGuid);
// Numbre of image in the tiff file
int totFrame = image.GetFrameCount(objDimension);
if (totFrame > 1)
{
// Saves every frame in a seperate file.
for (int i = 0; i < totFrame; i++)
{
image.SelectActiveFrame(objDimension, i);
string tempFile = Path.GetTempFileName() + ".tif";
if (image.PixelFormat.Equals(PixelFormat.Format1bppIndexed))
{
ImageCodecInfo myImageCodecInfo;
myImageCodecInfo = GetEncoderInfo("image/tiff");
EncoderParameters myEncoderParameters;
myEncoderParameters = new EncoderParameters(1);
myEncoderParameters.Param[0] = new
EncoderParameter(Encoder.Compression, (long)EncoderValue.CompressionCCITT4);
image.Save(tempFile, myImageCodecInfo, myEncoderParameters);
}
else
{
image.Save(tempFile, ImageFormat.Tiff);
}
FileStream stream = new System.IO.FileStream(tempFile, FileMode.Open, FileAccess.Read);
if (i == 0)
{
repImage.stream = stream;
repObj = repImage as RepObj;
}
else
{
new Page(report);
RepImage di = new RepImageMM(stream, Double.NaN, Double.NaN);
report.page_Cur.AddMM(0, 0, di);
}
}
}
}
}
#endif
}
base.Add(rX, rY, repObj);
}
protected double RealX(RepObj repObj, double r_X)
{
if (repObj is RepRect)
{
RepRect repRect = (RepRect)repObj;
return(r_X + repRect.penProp.rWidth / 2);
}
else
{
return(r_X);
}
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the current cell.</summary>
/// <param name="repObj">Report object that will be added to the current cell</param>
private void AddRepObj(RepObj repObj)
{
if (oData == null)
{
oData = repObj;
}
else
{
ArrayList al_RepObj = oData as ArrayList;
if (al_RepObj == null)
{
al_RepObj = new ArrayList(10);
al_RepObj.Add(oData);
oData = al_RepObj;
}
al_RepObj.Add(repObj);
}
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Calculates the bottom position of the row.</summary>
/// <param name="bCommitted">If <see langword="true"/>, the bottom position of the committed rows will be calculated, otherwise the bottom position of all rows will be calculated. </param>
/// <returns>Bottom position (points, 1/72 inch)</returns>
internal Double rCalculateMaxY(Boolean bCommitted)
{
Double rMaxY = 0;
Debug.Assert(!bCommitted || (tlmBase.tlmRow_Committed.iIndex >= tlmRow_Start.iIndex && tlmBase.tlmRow_Committed.iIndex <= tlmRow_End.iIndex));
Int32 iRepObjCount = (bCommitted ? tlmColumn_Start.iRepObjCommitted : this.iRepObjCount);
for (Int32 iRepObj = 0; iRepObj < iRepObjCount; iRepObj++)
{
RepObj repObj = repObj_Get(iRepObj);
Double rPosBottom = repObj.rPosBottom;
if (rPosBottom > rMaxY)
{
rMaxY = rPosBottom;
}
}
return(rMaxY + rIndentBottom);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
internal void AddCT(Double rX, Double rY, RepObj repObj)
{
AddAligned(rX, RepObj.rAlignCenter, rY, RepObj.rAlignTop, repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
internal void AddLT(Double rX, Double rY, RepObj repObj)
{
AddLT(rX, rY, repObj, null);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
/// <param name="repObj_Pos">The new report object will be inserted before the specified position.
/// If the position is null it will be appended to the end of the list.</param>
public void AddLT(Double rX, Double rY, RepObj repObj, RepObj repObj_Pos)
{
AddAligned(rX, RepObj.rAlignLeft, rY, RepObj.rAlignTop, repObj, repObj_Pos);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment (metric versîon).</summary>
/// <param name="rX">X-coordinate of the report objectt in millimeter</param>
/// <param name="rAlignH">Horizontal alignment of the report object relative to [X].</param>
/// <param name="rY">Y-coordinate of the report objectt in millimeter</param>
/// <param name="rAlignV">Vertical alignment of the report object relative to [Y].</param>
/// <param name="repObj">Report object to add to the container</param>
public void AddAlignedMM(Double rX, Double rAlignH, Double rY, Double rAlignV, RepObj repObj)
{
AddAligned(RT.rPointFromMM(rX), rAlignH, RT.rPointFromMM(rY), rAlignV, repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
internal void Add(Double rX, Double rY, RepObj repObj)
{
repObj.matrixD.rDX = rX;
repObj.matrixD.rDY = rY;
Add(repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>This method will be called after the report object has been added to the container.</summary>
public void Remove(RepObj repObj)
{
list_RepObj.Remove(repObj);
repObj.container = null;
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
internal void AddRC(Double rX, Double rY, RepObj repObj)
{
AddAligned(rX, RepObj.rAlignRight, rY, RepObj.rAlignCenter, repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the cell at the current position.</summary>
/// <remarks>The current horizontal position <see cref="TlmCell.rCurX"/> will be incremented by the width of the report object.</remarks>
/// <param name="repObj">Report object that will be added to the cell</param>
internal void SplitCell(TlmRow tlmRow_2)
{
TlmRow tlmRow_Committed = tlmBase.tlmRow_Committed;
TlmCell tlmCell_2 = new TlmCell(tlmColumn_Start, tlmColumn_End, tlmRow_2);
if (tlmRow_End.iIndex != tlmRow_Committed.iIndex)
{
tlmCell_2.tlmRow_End = tlmRow_End;
}
tlmRow_2.aTlmCell.SetCell(tlmColumn_Start.iIndex, tlmCell_2);
tlmRow_End = tlmRow_Committed;
tlmCell_2.rAlignH = rAlignH;
tlmCell_2.rAlignV = rAlignV;
tlmCell_2.rAngle = rAngle;
tlmCell_2.tlmTextMode = tlmTextMode;
tlmCell_2.rLineFeed = rLineFeed;
tlmCell_2.rMarginLeft = rMarginLeft;
tlmCell_2.rMarginRight = rMarginRight;
tlmCell_2.rMarginTop = rMarginTop;
tlmCell_2.rMarginBottom = rMarginBottom;
tlmCell_2.rIndentLeft = rIndentLeft;
tlmCell_2.rIndentRight = rIndentRight;
tlmCell_2.rIndentTop = rIndentTop;
tlmCell_2.rIndentBottom = rIndentBottom;
tlmCell_2.brushProp_Back = brushProp_Back;
tlmCell_2.penProp_LineLeft = penProp_LineLeft;
tlmCell_2.penProp_LineRight = penProp_LineRight;
tlmCell_2.penProp_LineTop = penProp_LineTop;
tlmCell_2.penProp_LineBottom = penProp_LineBottom;
tlmCell_2.iOrderLineLeft = iOrderLineLeft;
tlmCell_2.iOrderLineRight = iOrderLineRight;
tlmCell_2.iOrderLineTop = iOrderLineTop;
tlmCell_2.iOrderLineBottom = iOrderLineBottom;
// get vertical offset
Int32 iStartIndex = tlmColumn_Start.iRepObjCommitted;
Double rDelta = 0.0;
if (iStartIndex < iRepObjCount)
{
RepObj repObj = repObj_Get(iStartIndex);
rDelta = repObj.rPosTop - rIndentTop;
}
tlmCell_2.status = status;
tlmCell_2.rCurX = rCurX;
tlmCell_2.rCurY = rCurY - rDelta;
tlmCell_2.iFirstRepObjOfCurLine = Math.Max(0, iFirstRepObjOfCurLine - iStartIndex);
tlmCell_2.bCut = bCut;
// copy RepObjects
for (Int32 iRepObj = iStartIndex; iRepObj < iRepObjCount; iRepObj++)
{
RepObj repObj = repObj_Get(iRepObj);
repObj.matrixD.rDY -= rDelta;
tlmCell_2.AddRepObj(repObj);
}
RemoveRange(iStartIndex, iRepObjCount - iStartIndex);
}
/// <summary>
/// Adds a line of report objects to the current container at the current position.
/// </summary>
/// <param name="repObjs">Array of report objects to add to the container</param>
/// <returns>Leftover report objects that didn't fit in the line.</returns>
public RepObj[] AddLine(RepObj[] repObjs)
{
if (status == Status.Init && _container_Cur == null)
{
CreateNewContainer();
}
double rMaxHeight = 0;
double rMaxStringHeight = 0;
double rWidth = 0;
rX_Cur = 0;
ArrayList line = new ArrayList();
ArrayList leftover = new ArrayList();
foreach (RepObj repObj in repObjs)
{
if (rWidth + RealWidth(repObj) <= container_Cur.rWidth)
{
line.Add(repObj);
}
else if (rWidth < container_Cur.rWidth && repObj is RepString)
{
RepString repString = (RepString)repObj;
RepString repStringLeftover;
BreakByWord(ref repString, out repStringLeftover, container_Cur.rWidth - rWidth);
if (repString != null)
{
line.Add(repString);
}
if (repStringLeftover != null)
{
leftover.Add(repStringLeftover);
}
}
else
{
leftover.Add(repObj);
}
rWidth += RealWidth(repObj);
}
// if line.Count is zero and leftover.count isn't, we've got a single RepObj bigger than
// its container
if (line.Count == 0 && leftover.Count > 0)
{
RepObj repObj = (RepObj)leftover[0];
if (repObj is RepString) // can't break by word, so break by letter
{
RepString repStringLeftover;
RepString repString = (RepString)repObj;
BreakByLetter(ref repString, out repStringLeftover, container_Cur.rWidth);
if (repString != null)
{
line.Add(repString);
}
leftover.RemoveAt(0);
if (repStringLeftover != null)
{
leftover.Insert(0, repStringLeftover);
}
}
else
{
line.Add(leftover[0]);
leftover.RemoveAt(0);
}
}
// compute max hight and max line hight for alignment
foreach (RepObj repObj in line)
{
if (repObj is RepString && RealHight(repObj) > rMaxStringHeight)
{
rMaxStringHeight = RealHight(repObj);
}
if (RealHight(repObj) > rMaxHeight)
{
rMaxHeight = RealHight(repObj);
}
}
rY_Cur += rMaxHeight;
rMaxStringHeight /= 4; // poor man's line leading
if (rY_Cur > container_Cur.rHeight)
{
_container_Cur = null;
CreateNewContainer();
rY_Cur += rMaxHeight;
}
foreach (RepObj repObj in line)
{
if (repObj is RepString)
{
container_Cur.Add(rX_Cur, rY_Cur - rMaxStringHeight, repObj);
}
else
{
container_Cur.Add(RealX(repObj, rX_Cur), RealY(repObj, rY_Cur), repObj);
}
rX_Cur += RealWidth(repObj);
}
if (leftover.Count > 0)
{
return((RepObj[])leftover.ToArray(typeof(RepObj)));
}
else
{
return(null);
}
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rAlignH">Horizontal alignment of the report object relative to [X].</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="rAlignV">Vertical alignment of the report object relative to [Y].</param>
/// <param name="repObj">Report object to add to the container</param>
public new void AddAligned(Double rX, Double rAlignH, Double rY, Double rAlignV, RepObj repObj)
{
repObj.matrixD.rDX = rX;
repObj.rAlignH = rAlignH;
repObj.matrixD.rDY = rY;
repObj.rAlignV = rAlignV;
Add(repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container, right justified.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
public void AddRight(Double rX, Double rY, RepObj repObj)
{
AddAligned(rX, RepObj.rAlignRight, rY, RepObj.rAlignBottom, repObj);
}
public void AddCenteredMM(Double rY, RepObj repObj)
{
AddCentered(RT.rMM(rY), repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container, horizontally centered (metric version).</summary>
/// <param name="rY">Y-coordinate of the report objectt in millimeter</param>
/// <param name="repObj">Report object to add to the container</param>
public void AddCB_MM(Double rY, RepObj repObj)
{
AddCB(RT.rPointFromMM(rY), repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
internal void AddCB(Double rX, Double rY, RepObj repObj)
{
AddAligned(rX, RepObj.rAlignCenter, rY, RepObj.rAlignBottom, repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
internal void AddRT(Double rX, Double rY, RepObj repObj)
{
AddAligned(rX, RepObj.rAlignRight, rY, RepObj.rAlignTop, repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the cell at the current position with the specified offset (metric version).</summary>
/// <remarks>
/// The current horizontal position <see cref="TlmCell.rCurX"/> will be incremented by the width of the report object.
/// <para>The horizontal offset <paramref name="rOfsH_MM"/> can be used for example to make a space in front of the report object.
/// The vertical offset <paramref name="rOfsV_MM"/> can be used for example to adjust the vertical position of an image or to set super-/subscript fonts.</para>
/// <para>For the inch version see <see cref="TlmCell.Add(System.Double,System.Double,RepObj)"/>.</para>
/// </remarks>
/// <param name="rOfsH_MM">Horizontal offset (mm)</param>
/// <param name="rOfsV_MM">Vertical offset (mm)</param>
/// <param name="repObj">Report object that will be added to the cell</param>
/// <seealso cref="TlmCell.Add(System.Double,System.Double,RepObj)"/>
public void AddMM(Double rOfsH_MM, Double rOfsV_MM, RepObj repObj)
{
Add(RT.rPointFromMM(rOfsH_MM), RT.rPointFromMM(rOfsV_MM), repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
public void AddRC_MM(Double rX, Double rY, RepObj repObj)
{
AddRC(RT.rPointFromMM(rX), RT.rPointFromMM(rY), repObj);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rAlignH">Horizontal alignment of the report object relative to [X].</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="rAlignV">Vertical alignment of the report object relative to [Y].</param>
/// <param name="repObj">Report object to add to the container</param>
/// <param name="repObj_Pos">The new report object will be inserted before the specified position.
/// If the position is null it will be appended to the end of the list.</param>
internal void AddAligned(Double rX, Double rAlignH, Double rY, Double rAlignV, RepObj repObj, RepObj repObj_Pos)
{
repObj.matrixD.rDX = rX;
repObj.rAlignH = rAlignH;
repObj.matrixD.rDY = rY;
repObj.rAlignV = rAlignV;
Add(repObj, repObj_Pos);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Appends a report object to the container.</summary>
/// <param name="repObj">Report object that must be added to the container</param>
internal void Add(RepObj repObj)
{
Add(repObj, null);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container and sets the alignment.</summary>
/// <param name="rX">X-coordinate of the report object</param>
/// <param name="rAlignH">Horizontal alignment of the report object relative to [X].</param>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="rAlignV">Vertical alignment of the report object relative to [Y].</param>
/// <param name="repObj">Report object to add to the container</param>
internal void AddAligned(Double rX, Double rAlignH, Double rY, Double rAlignV, RepObj repObj)
{
AddAligned(rX, rAlignH, rY, rAlignV, repObj, null);
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the current container at the current position.</summary>
/// <param name="repObj">Report object to add to the container</param>
public void Add(RepObj repObj)
{
if (status == Status.Init)
{
if (_container_Cur == null)
{
CreateNewContainer();
}
}
if (repObj is RepString)
{
RepString repString = (RepString)repObj;
FontProp fp = repString.fontProp;
String sText = repString.sText;
Int32 iLineStartIndex = 0;
Int32 iIndex = 0;
while (true)
{
if (rY_Cur > container_Cur.rHeight)
{
_container_Cur = null;
CreateNewContainer();
}
Int32 iLineBreakIndex = 0;
Double rPosX = rX_Cur;
Double rLineBreakPos = 0;
while (true)
{
if (iIndex >= sText.Length)
{
iLineBreakIndex = iIndex;
rLineBreakPos = rPosX;
break;
}
Char c = sText[iIndex];
rPosX += fp.rWidth(Convert.ToString(c));
if (rPosX >= container_Cur.rWidth)
{
if (iLineBreakIndex == 0)
{
if (iIndex == iLineStartIndex) // at least one character must be printed
{
iIndex++;
}
iLineBreakIndex = iIndex;
break;
}
iIndex = iLineBreakIndex;
break;
}
if (c == ' ')
{
iLineBreakIndex = iIndex + 1;
rLineBreakPos = rPosX;
}
else if (c == '\n')
{
iLineBreakIndex = iIndex;
iIndex++;
break;
}
iIndex++;
}
if (iLineStartIndex == 0 && iIndex >= sText.Length) // add entire object
{
container_Cur.Add(rX_Cur, rY_Cur, repObj);
rX_Cur = rLineBreakPos;
break;
}
String sLine = sText.Substring(iLineStartIndex, iLineBreakIndex - iLineStartIndex);
container_Cur.Add(rX_Cur, rY_Cur, new RepString(fp, sLine));
if (iIndex >= sText.Length)
{
rX_Cur = rLineBreakPos;
break;
}
rX_Cur = 0;
rY_Cur += fp.rLineFeed;
iLineStartIndex = iIndex;
}
}
else
{
Debug.Fail("Unknown object type");
container_Cur.Add(rX_Cur, rY_Cur, repObj);
}
}
//----------------------------------------------------------------------------------------------------x
/// <summary>Adds a report object to the container, horizontally centered.</summary>
/// <param name="rY">Y-coordinate of the report object</param>
/// <param name="repObj">Report object to add to the container</param>
public void AddCB(Double rY, RepObj repObj)
{
base.AddCB(rWidth / 2.0, rY, repObj);
}