protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
double tolerance = doc.ModelAbsoluteTolerance;
double angleTolerance = doc.ModelAngleToleranceRadians;
List <Curve> icur = new List <Curve>();
GetObject gcr = new Rhino.Input.Custom.GetObject();
gcr.SetCommandPrompt("Select reference circles for prongs. (No curves)");
gcr.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcr.GroupSelect = true;
gcr.SubObjectSelect = true;
gcr.DeselectAllBeforePostSelect = true;
gcr.OneByOnePostSelect = false;
gcr.GetMultiple(1, 0);
for (int ie = 0; ie < gcr.ObjectCount; ie++)
{
Rhino.DocObjects.ObjRef objref = gcr.Object(ie);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
Curve refcr = objref.Curve();
if (refcr == null)
{
return(Result.Failure);
}
obj.Select(false);
icur.Add(refcr);
}
while (true)
{
m_escape_key_pressed = false;
RhinoApp.EscapeKeyPressed += RhinoApp_EscapeKeyPressed;
Point3d pt0 = new Point3d(0, 0, hight);
Point3d pt1 = new Point3d(0, 0, -(length - hight));
double rotationRadiant = ((rotation / 180) * 3.1415);
List <Point3d> curvePoints = new List <Point3d>()
{
pt0, pt1
};
Curve prongCurve = Curve.CreateInterpolatedCurve(curvePoints, 3);
if (!capBool)
{
capMode = PipeCapMode.Flat;
}
else if (capBool)
{
capMode = PipeCapMode.Round;
}
Brep[] cylBrep1 = Brep.CreatePipe(prongCurve, prongDia / 2, false, capMode, false, tolerance, angleTolerance);
Brep cylBrep2 = cylBrep1[0];
cylBrep2.Faces.RemoveAt(2);
Brep cylBrep3 = cylBrep2.CapPlanarHoles(tolerance);
if (capBool)
{
Vector3d scaleVec = new Vector3d(0, 0, 1);
var scalePlane = new Plane(pt0, scaleVec);
var capScale = Transform.Scale(scalePlane, 1.0, 1.0, capHight);
var surf2 = cylBrep3.Faces[1].UnderlyingSurface();
NurbsSurface nurbSurf2 = surf2.ToNurbsSurface();
nurbSurf2.Transform(capScale);
Brep capBrep = nurbSurf2.ToBrep();
cylBrep3.Append(capBrep);
cylBrep3.Faces.RemoveAt(1);
}
cylBrep3.Compact();
cylBrep3.JoinNakedEdges(tolerance);
string instDefCount = DateTime.Now.ToString("ddMMyyyyHHmmss");
Brep[] brepArray = new Brep[1] {
cylBrep3
};
var prongIndex = doc.InstanceDefinitions.Add("Prong" + instDefCount, "RefProng", Point3d.Origin, brepArray);
foreach (Curve c in icur)
{
Circle circleProngs = new Circle();
c.TryGetCircle(out circleProngs, tolerance);
NurbsCurve curveProngs = circleProngs.ToNurbsCurve();
Plane planeNew = circleProngs.Plane;
Vector3d plVec = planeNew.Normal;
if (planeNew == null)
{
curveProngs.DivideByCount(3, true, out Point3d[] curveProngsPoints);
planeNew = new Plane(curvePoints[0], curveProngsPoints[1], curveProngsPoints[2]);
}
Curve[] offsetCurveArray = curveProngs.Offset(planeNew, prongDia / 4, tolerance, CurveOffsetCornerStyle.Sharp);
Curve offsetCurve = offsetCurveArray[0];
double[] segParameters = offsetCurve.DivideByCount(prongCount, true);
List <Point3d> prongPoints = new List <Point3d>();
List <Guid> idsInter = new List <Guid>();
foreach (double p in segParameters)
{
Point3d zen = new Point3d(0, 0, 0);
Point3d prongPoint = offsetCurve.PointAt(p);
Point3d center = circleProngs.Center;
Vector3d moveV = new Vector3d(prongPoint);
Vector3d zaxis = new Vector3d(0.0, 0.0, 1.0);
Plane planeOr = new Plane(zen, zaxis);
Plane plane = new Plane(prongPoint, plVec);
var transform1 = Transform.PlaneToPlane(planeOr, plane);
var transform2 = Transform.Rotation(rotationRadiant, plVec, center);
var prongA = doc.Objects.AddInstanceObject(prongIndex, transform1);
var prongB = doc.Objects.Transform(prongA, transform2, true);
ids.Add(prongB);
}
doc.Views.Redraw();
}
GetOption go = new Rhino.Input.Custom.GetOption();
go.SetCommandPrompt("Set prong parameters.");
go.AcceptNothing(true);
var countProng = new Rhino.Input.Custom.OptionInteger(prongCount);
var diaProng = new Rhino.Input.Custom.OptionDouble(prongDia);
var hightProng = new Rhino.Input.Custom.OptionDouble(hight);
var lengthProng = new Rhino.Input.Custom.OptionDouble(length);
var rotProng = new Rhino.Input.Custom.OptionDouble(rotation);
var capProng = new Rhino.Input.Custom.OptionToggle(capBool, "Flat", "Round");
var hightCap = new Rhino.Input.Custom.OptionDouble(capHight);
go.AddOptionInteger("Count", ref countProng);
go.AddOptionDouble("Diameter", ref diaProng);
go.AddOptionDouble("Hight", ref hightProng);
go.AddOptionDouble("Length", ref lengthProng);
go.AddOptionDouble("Rotation", ref rotProng);
go.AddOptionToggle("Cap", ref capProng);
if (capBool)
{
go.AddOptionDouble("Caphight", ref hightCap);
}
GetResult res = go.Get();
if (m_escape_key_pressed)
{
break;
}
hight = hightProng.CurrentValue;
length = lengthProng.CurrentValue;
prongCount = countProng.CurrentValue;
prongDia = diaProng.CurrentValue;
rotation = rotProng.CurrentValue;
capBool = capProng.CurrentValue;
capHight = hightCap.CurrentValue;
if (length <= 0.0)
{
length = 1.0;
}
if (prongCount <= 0)
{
prongCount = 1;
}
if (prongDia <= 0.0)
{
prongDia = 1.0;
}
if (res == GetResult.Nothing)
{
break;
}
doc.Objects.Delete(ids, true);
}
RhinoApp.EscapeKeyPressed -= RhinoApp_EscapeKeyPressed;
doc.Groups.Add(ids);
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// --- Set tolerance
_unit = doc.ModelAbsoluteTolerance;
// --- Get Mesh
var getMesh = new GetObject { GeometryFilter = ObjectType.Mesh };
getMesh.SetCommandPrompt("Select mesh");
while (true)
{
var getMeshResult = getMesh.Get();
if (getMesh.CommandResult() != Result.Success)
return getMesh.CommandResult();
if (getMeshResult == GetResult.Object)
break;
}
_mesh = (Mesh)getMesh.Object(0).Geometry();
doc.Objects.UnselectAll();
// --- Start preview
DisplayPipeline.DrawOverlay += DisplayPipelineOnDrawOverlay;
// --- Get options
var getOptions = new GetOption();
getOptions.SetCommandPrompt("Settings:");
getOptions.AddOptionInteger("CountX", ref _countX);
getOptions.AddOptionInteger("CountY", ref _countY);
getOptions.AddOptionDouble("Thickness", ref _thickness);
getOptions.AddOption("Plane");
getOptions.AddOptionDouble("Deeper", ref _deeper);
getOptions.AddOptionToggle("DeleteInput", ref _deleteSource);
getOptions.AddOptionToggle("Project", ref _project);
getOptions.AddOptionDouble("ProjectSpace", ref _projectSpace);
getOptions.AcceptNothing(true);
do
{
doc.Views.Redraw();
getOptions.Get();
switch (getOptions.Result())
{
case GetResult.Option:
switch (getOptions.Option().EnglishName)
{
case "Plane":
_plane = PlaneGetter.GetPlane() ?? _plane;
break;
}
break;
}
} while (getOptions.CommandResult() == Result.Success && getOptions.Result() != GetResult.Nothing);
// --- Stop preview
DisplayPipeline.DrawOverlay -= DisplayPipelineOnDrawOverlay;
// --- Check for cancel with ESC
if (getOptions.Result() == GetResult.Cancel)
return Result.Cancel;
// --- Execute
var result = Waffle.Create(_mesh, _plane, _thickness.CurrentValue, _deeper.CurrentValue, _countX.CurrentValue, _countY.CurrentValue, _unit, _project.CurrentValue, _projectSpace.CurrentValue);
// --- Add objects
foreach (var curves in result.CurvesX)
doc.Groups.Add(curves.Select(o => doc.Objects.AddCurve(o)));
foreach (var curves in result.CurvesY)
doc.Groups.Add(curves.Select(o => doc.Objects.AddCurve(o)));
// --- Delete input
if (_deleteSource.CurrentValue)
doc.Objects.Delete(getMesh.Object(0).ObjectId, true);
// --- Update views
doc.Views.Redraw();
return Result.Success;
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
double tolerance = doc.ModelAbsoluteTolerance;
List <Curve> icur = new List <Curve>();
GetObject gcr = new Rhino.Input.Custom.GetObject();
gcr.SetCommandPrompt("Select reference circles for drill. (No curves)");
gcr.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcr.GroupSelect = true;
gcr.SubObjectSelect = true;
gcr.DeselectAllBeforePostSelect = true;
gcr.OneByOnePostSelect = false;
gcr.GetMultiple(1, 0);
for (int ie = 0; ie < gcr.ObjectCount; ie++)
{
Rhino.DocObjects.ObjRef objref = gcr.Object(ie);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
Curve refcr = objref.Curve();
if (refcr == null)
{
return(Result.Failure);
}
obj.Select(false);
icur.Add(refcr);
}
while (true)
{
m_escape_key_pressed = false;
RhinoApp.EscapeKeyPressed += RhinoApp_EscapeKeyPressed;
List <Curve> curveDrill = new List <Curve>();
Point3d centerTop = new Point3d(0, 0, (headDrill + topDrill) * drillScale);
Circle circleTop = new Circle(centerTop, ancheadDrill / 2 * drillScale);
Curve curveTop = circleTop.ToNurbsCurve();
curveDrill.Add(curveTop);
Point3d centerMid = new Point3d(0, 0, topDrill * drillScale);
Circle circleMid = new Circle(centerMid, drillScale / 2);
Curve curveMid = circleMid.ToNurbsCurve();
curveDrill.Add(curveMid);
Circle circleBase = new Circle(drillScale / 2);
Curve curveBase = circleBase.ToNurbsCurve();
curveDrill.Add(curveBase);
Point3d centerLow = new Point3d(0, 0, -midDrill * drillScale);
Circle circleLow = new Circle(centerLow, ancDrill / 2 * drillScale);
Curve curveLow = circleLow.ToNurbsCurve();
curveDrill.Add(curveLow);
if (bottDrill != 0)
{
Point3d centerBot = new Point3d(0, 0, (-midDrill - bottDrill) * drillScale);
Circle circleBot = new Circle(centerBot, ancDrill / 2 * drillScale);
Curve curveBot = circleBot.ToNurbsCurve();
curveDrill.Add(curveBot);
}
Brep[] cylBrep1 = Brep.CreateFromLoft(curveDrill, Point3d.Unset, Point3d.Unset, LoftType.Straight, false);
Brep[] cylBrep2 = Brep.CreateBooleanUnion(cylBrep1, tolerance);
Brep cylBrepFinal = cylBrep1[0];
cylBrepFinal = cylBrepFinal.CapPlanarHoles(tolerance);
string instDefCount = DateTime.Now.ToString("ddMMyyyyHHmmss");
Brep[] brepArray = new Brep[1] {
cylBrepFinal
};
var drillIndex = doc.InstanceDefinitions.Add("Drill" + instDefCount, "RefDrill 1mm", Point3d.Origin, brepArray);
foreach (Curve c in icur)
{
Circle circleDrill = new Circle();
c.TryGetCircle(out circleDrill, tolerance);
double radiusDrill = circleDrill.Diameter;
Point3d center = circleDrill.Center;
Vector3d moveV = new Vector3d(center);
Vector3d zaxis = new Vector3d(0.0, 0.0, 1.0);
Plane planeOr = new Plane(center, zaxis);
Plane planeNew = circleDrill.Plane;
var transform1 = Transform.Translation(moveV);
var transform2 = Transform.Scale(center, radiusDrill);
var transform3 = Transform.PlaneToPlane(planeOr, planeNew);
var stoneA = doc.Objects.AddInstanceObject(drillIndex, transform1);
var stoneB = doc.Objects.Transform(stoneA, transform2, true);
var stoneC = doc.Objects.Transform(stoneB, transform3, true);
ids.Add(stoneC);
doc.Views.Redraw();
}
GetOption go = new Rhino.Input.Custom.GetOption();
go.SetCommandPrompt("Set drill parameters.");
go.AcceptNothing(true);
var drillHead = new Rhino.Input.Custom.OptionDouble(headDrill);
var drillAncHead = new Rhino.Input.Custom.OptionDouble(ancheadDrill);
var drillTop = new Rhino.Input.Custom.OptionDouble(topDrill);
var drillMid = new Rhino.Input.Custom.OptionDouble(midDrill);
var drillAnc = new Rhino.Input.Custom.OptionDouble(ancDrill);
var drillBott = new Rhino.Input.Custom.OptionDouble(bottDrill);
var scaleDrill = new Rhino.Input.Custom.OptionDouble(drillScale);
go.AddOptionDouble("Top", ref drillHead);
go.AddOptionDouble("TopAngle", ref drillAncHead);
go.AddOptionDouble("Mid", ref drillTop);
go.AddOptionDouble("Bottom", ref drillMid);
go.AddOptionDouble("BottomAngle", ref drillAnc);
go.AddOptionDouble("Tail", ref drillBott);
go.AddOptionDouble("Scale", ref scaleDrill);
GetResult res = go.Get();
if (m_escape_key_pressed)
{
break;
}
topDrill = drillTop.CurrentValue;
midDrill = drillMid.CurrentValue;
ancDrill = drillAnc.CurrentValue;
bottDrill = drillBott.CurrentValue;
drillScale = scaleDrill.CurrentValue;
headDrill = drillHead.CurrentValue;
ancheadDrill = drillAncHead.CurrentValue;
if (res == GetResult.Nothing)
{
break;
}
doc.Objects.Delete(ids, true);
}
RhinoApp.EscapeKeyPressed -= RhinoApp_EscapeKeyPressed;
doc.Groups.Add(ids);
return(Result.Success);
}
