/// <summary> RunCommandPickPlane is a helper method for picking an existing surface to draw on </summary>
/// <param name="mRhinoDoc"></param>
/// <param name="mode"></param>
/// <returns></returns>
protected Result RunCommandPickPlane(RhinoDoc mRhinoDoc, RunMode mode)
{
//routine for picking an existing surface to draw on
//please select a plane
Rhino.DocObjects.ObjectType filter = Rhino.DocObjects.ObjectType.Surface;
Rhino.DocObjects.ObjRef objref = null;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetOneObject("Select surface", false, filter, out objref);
if (rc != Rhino.Commands.Result.Success || objref == null)
{
return(rc);
}
Rhino.Geometry.Surface refSrf = objref.Surface();
refSrf.FrameAt(.5, .5, out plane1);
Point3d pOrigin = refSrf.PointAt(1, 1);
Point3d pY = refSrf.PointAt(0.5, 1);
Point3d pX = refSrf.PointAt(1, 0.75);
Vector3d vX = Rhino.Geometry.Point3d.Subtract(pX, pOrigin);
Vector3d vY = Rhino.Geometry.Point3d.Subtract(pY, pOrigin);
plane1 = new Plane(pOrigin, vX, vY);
Rhino.DocObjects.RhinoObject rhobj = objref.Object();
rhobj.Select(false);
mRhinoDoc.Objects.AddPoint(pOrigin);
mRhinoDoc.Objects.AddPoint(pX);
mRhinoDoc.Objects.AddPoint(pY);
mRhinoDoc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.DocObjects.ObjectType filter = Rhino.DocObjects.ObjectType.Mesh;
Rhino.DocObjects.ObjRef objref = null;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetOneObject("Select mesh to contour", false, filter, out objref);
if (rc != Rhino.Commands.Result.Success || objref == null)
{
return(rc);
}
Rhino.Geometry.Mesh mesh = objref.Geometry() as Rhino.Geometry.Mesh;
if (null == mesh)
{
return(Rhino.Commands.Result.Failure);
}
Rhino.Geometry.BoundingBox bbox = mesh.GetBoundingBox(false);
Rhino.Geometry.Point3d start_pt = bbox.Corner(true, true, true);
Rhino.Geometry.Point3d end_pt = bbox.Corner(false, true, true);
double interval = start_pt.DistanceTo(end_pt) / 10;
Rhino.Geometry.Curve[] curves = Rhino.Geometry.Mesh.CreateContourCurves(mesh, start_pt, end_pt, interval);
if (null != curves && curves.Length > 0)
{
for (int i = 0; i < curves.Length; i++)
{
doc.Objects.AddCurve(curves[i]);
}
doc.Views.Redraw();
}
return(Result.Success);
}
/// <summary>
/// Commmand.RunCommand override
/// </summary>
protected override Rhino.Commands.Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.Commands.Result rc = Rhino.Commands.Result.Success;
if (!_bIsLoaded)
{
string script = ScriptFromResources(ResourceName, Password);
if (!string.IsNullOrEmpty(script))
{
string macro = string.Format("_-RunScript ({0})", script);
if (RhinoApp.RunScript(macro, false))
{
_bIsLoaded = true;
}
else
{
rc = Result.Failure;
}
}
}
if (rc == Result.Success)
{
string macro = string.Format("_-RunScript ({0})", EnglishName);
RhinoApp.RunScript(macro, false);
}
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
SampleCsGetMultiplePointsConduit conduit = new SampleCsGetMultiplePointsConduit();
conduit.Enabled = true;
Rhino.Commands.Result rc = Result.Nothing;
Rhino.Input.Custom.GetPoint gp = new Rhino.Input.Custom.GetPoint();
while (true)
{
if (0 == conduit.PointCount)
{
gp.SetCommandPrompt("Location of point object.");
gp.AcceptNothing(false);
gp.ClearCommandOptions();
}
else
{
gp.SetCommandPrompt("Location of point object. Press Enter when done");
gp.AcceptNothing(true);
gp.AddOption("Undo");
}
Rhino.Input.GetResult res = gp.Get();
if (res == Rhino.Input.GetResult.Point)
{
conduit.AddPoint(gp.Point());
doc.Views.Redraw();
}
else if (res == Rhino.Input.GetResult.Option)
{
conduit.RemoveLastPoint();
doc.Views.Redraw();
}
else if (res == Rhino.Input.GetResult.Nothing)
{
rc = Rhino.Commands.Result.Success;
break;
}
else
{
rc = Rhino.Commands.Result.Cancel;
break;
}
}
if (rc == Result.Success && conduit.PointCount > 0)
{
doc.Objects.AddPoints(conduit.Points);
}
conduit.Enabled = false;
doc.Views.Redraw();
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.Geometry.Line line;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetLine(out line);
if (rc == Rhino.Commands.Result.Success)
{
Rhino.Geometry.LineCurve crv = new Rhino.Geometry.LineCurve(line);
SampleCsCustomLineObject obj = new SampleCsCustomLineObject();
doc.Objects.AddRhinoObject(obj, crv);
doc.Views.Redraw();
}
return(Rhino.Commands.Result.Success);
}
/// <summary>
/// Rhino calls this function to run the command.
/// </summary>
protected override Rhino.Commands.Result RunCommand(Rhino.RhinoDoc doc, Rhino.Commands.RunMode mode)
{
const Rhino.DocObjects.ObjectType filter = Rhino.DocObjects.ObjectType.Curve;
Rhino.DocObjects.ObjRef objref;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetOneObject("Select curve to divide", false, filter, out objref);
if (rc != Rhino.Commands.Result.Success || objref == null)
{
return(rc);
}
Rhino.Geometry.Curve curve = objref.Curve();
if (null == curve || curve.IsShort(Rhino.RhinoMath.ZeroTolerance))
{
return(Rhino.Commands.Result.Failure);
}
int segmentCount = 2;
rc = Rhino.Input.RhinoGet.GetInteger("Number of segments", false, ref segmentCount, 2, 100);
if (rc != Rhino.Commands.Result.Success)
{
return(rc);
}
Rhino.Geometry.Point3d[] points;
curve.DivideByCount(segmentCount, true, out points);
if (null == points)
{
return(Rhino.Commands.Result.Failure);
}
// Create a history record
Rhino.DocObjects.HistoryRecord history = new Rhino.DocObjects.HistoryRecord(this, _historyVersion);
WriteHistory(history, objref, segmentCount, points.Length);
for (int i = 0; i < points.Length; i++)
{
doc.Objects.AddPoint(points[i], null, history, false);
}
doc.Views.Redraw();
return(Rhino.Commands.Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.DocObjects.ObjectType filter = Rhino.DocObjects.ObjectType.Surface | Rhino.DocObjects.ObjectType.PolysrfFilter;
Rhino.DocObjects.ObjRef objref = null;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetOneObject("Select surface or polysurface", false, filter, out objref);
if (rc != Rhino.Commands.Result.Success || objref == null)
{
return(rc);
}
Rhino.DocObjects.RhinoObject rhobj = objref.Object();
Rhino.Geometry.Brep brep = objref.Brep();
if (rhobj == null || brep == null)
{
return(Rhino.Commands.Result.Failure);
}
rhobj.Select(false);
System.Collections.Generic.List <Rhino.Geometry.Curve> curves = new System.Collections.Generic.List <Rhino.Geometry.Curve>();
foreach (Rhino.Geometry.BrepEdge edge in brep.Edges)
{
// Find only the naked edges
if (edge.Valence == Rhino.Geometry.EdgeAdjacency.Naked)
{
Rhino.Geometry.Curve crv = edge.DuplicateCurve();
if (null != crv)
{
curves.Add(crv);
}
}
}
double tol = 2.1 * doc.ModelAbsoluteTolerance;
Rhino.Geometry.Curve[] output = Rhino.Geometry.Curve.JoinCurves(curves, tol);
for (int i = 0; i < output.Length; i++)
{
Guid id = doc.Objects.AddCurve(output[i]);
doc.Objects.Select(id);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will select the curve with same length", EnglishName);
double tolerance = 0.001;
Rhino.Commands.Result rc = Rhino.Commands.Result.Failure;
using (GetObject getObjectAction = new GetObject())
{
getObjectAction.GeometryFilter = ObjectType.Curve;
getObjectAction.SetCommandPrompt("Please select curves");
var dblOption = new OptionDouble(tolerance, true, 0);
getObjectAction.AddOptionDouble("SelectionTolerance", ref dblOption);
getObjectAction.EnablePreSelect(true, true);
var result = getObjectAction.Get();
double refLength = 0.0;
if (result == GetResult.Object)
{
var value = getObjectAction.Object(0);
var crv = value.Curve();
if (crv != null)
{
refLength = crv.GetLength();
var objects = doc.Objects.FindByObjectType(ObjectType.Curve);
foreach (var obj in objects)
{
var _curve = (new ObjRef(obj)).Curve();
if (Rhino.RhinoMath.EpsilonEquals(_curve.GetLength(), refLength, dblOption.CurrentValue))
{
obj.Select(true);
}
}
rc = Rhino.Commands.Result.Success;
}
}
}
doc.Views.Redraw();
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.DocObjects.ObjectType filter = Rhino.DocObjects.ObjectType.Hatch;
Rhino.DocObjects.ObjRef objref = null;
Rhino.Commands.Result rc = Rhino.Input.RhinoGet.GetOneObject("Select hatch to explode", false, filter, out objref);
if (rc != Rhino.Commands.Result.Success || objref == null)
{
return(rc);
}
Rhino.Geometry.Hatch hatch = (Rhino.Geometry.Hatch)objref.Geometry();
if (null == hatch)
{
return(Rhino.Commands.Result.Failure);
}
Rhino.Geometry.GeometryBase[] hatch_geom = hatch.Explode();
if (null != hatch_geom)
{
for (int i = 0; i < hatch_geom.Length; i++)
{
Rhino.Geometry.GeometryBase geom = hatch_geom[i];
if (null != geom)
{
switch (geom.ObjectType)
{
case Rhino.DocObjects.ObjectType.Point:
{
Rhino.Geometry.Point point = (Rhino.Geometry.Point)geom;
if (null != point)
{
doc.Objects.AddPoint(point.Location);
}
}
break;
case Rhino.DocObjects.ObjectType.Curve:
{
Rhino.Geometry.Curve curve = (Rhino.Geometry.Curve)geom;
if (null != curve)
{
doc.Objects.AddCurve(curve);
}
}
break;
case Rhino.DocObjects.ObjectType.Brep:
{
Rhino.Geometry.Brep brep = (Rhino.Geometry.Brep)geom;
if (null != brep)
{
doc.Objects.AddBrep(brep);
}
}
break;
}
}
}
}
return(Rhino.Commands.Result.Success);
}
/// <summary> btnPickOrigin allows user to select origin of drawing plane </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnPickOrigin_Click(object sender, EventArgs e)
{
Rhino.Commands.Result result1 = selectPoint();
}