protected override void OnClick()
{
#region Prepare for editing
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("This command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
pCadFabric = pCadEd.CadastralFabric;
else
{
MessageBox.Show("Please start editing and try again.");
return;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
//bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
//ICadastralFabricLayer pCFLayer = null;
IWorkspace pWS = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
#endregion
dlgChangeParcelHistory pChangeHistoryDialog = new dlgChangeParcelHistory();
// ******** Display the dialog *********
DialogResult pDialogResult = pChangeHistoryDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
return;
//************************
#region Get Selection
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ICadastralFabricSchemaEdit2 pSchemaEd = null;
try
{
int iParcelCount = pCadaSel.SelectedParcelCount;
bool m_bShowProgressor = (iParcelCount > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iParcelCount * 14; //(estimate 7 lines per parcel, 4 pts per parcel)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Initializing...";
}
#endregion
#region Get Parcel History Fields
//Get the parcel table history fields
//SystemStart, SystemEnd, LegalStart, LegalEnd, Historic
int iParcSysStartDate = pParcelsTable.FindField("systemstartdate");
int iParcSysEndDate = pParcelsTable.FindField("systemenddate");
int iParcLegalStartDate = pParcelsTable.FindField("legalstartdate");
int iParcLegalEndDate = pParcelsTable.FindField("legalenddate");
int iParcHistorical = pParcelsTable.FindField("historical");
//Add the OIDs of all the selected parcels into a new feature IDSet
//Need a Lookup for the History information
Dictionary<int, string> ParcelToHistory_DICT = new Dictionary<int, string>();
List<string> sOIDList = new List<string>();
sOIDList.Add("");
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
break;
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
if (sOIDList[j].Trim() == "")
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
else
sOIDList[j] = sOIDList[j] + "," + Convert.ToString(pGSParcel.DatabaseId);
iCounter++;
}
else
{//maximum tokens reached
iCounter = 0;
//set up the next OIDList
j++;
sOIDList.Add("");
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
}
//add to the lookup
IGSAttributes pGSParcelAttributes = (IGSAttributes)pGSParcel;
object pObj = pGSParcelAttributes.GetProperty("systemstartdate");
string sSystemStartParcel = "";
if (pObj != null)
sSystemStartParcel = pObj.ToString();
pObj = pGSParcelAttributes.GetProperty("systemenddate");
string sSystemEndParcel = "";
if (pObj != null)
sSystemEndParcel = pObj.ToString();
string sLegalStartParcel = pGSParcel.LegalStartDate.ToString();
string sLegalEndParcel = pGSParcel.LegalEndDate.ToString();
string sHistorical = pGSParcel.Historical.ToString();
ParcelToHistory_DICT.Add(pGSParcel.DatabaseId, sSystemStartParcel + "," +
sSystemEndParcel + "," + sLegalStartParcel + "," + sLegalEndParcel + "," +
sHistorical);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
m_pStepProgressor.Step();
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
#endregion
#region Confirm Edit Locks
bool bIsFileBasedGDB = false;
bool bIsUnVersioned = false;
bool bUseNonVersioned = false;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
return;
//if we're in an enterprise then test for edit locks
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
pProgressorDialog.HideDialog();
pProgressorDialog = null;
Marshal.ReleaseComObject(pJob);
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
Marshal.ReleaseComObject(pJob);
}
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
Marshal.ReleaseComObject(pSoftLcksInConflict);
Marshal.ReleaseComObject(pParcelsToLock);
Marshal.ReleaseComObject(pLocksInConflict);
}
#endregion
string sParcelSysEndDate = pParcelsTable.Fields.get_Field(iParcSysEndDate).Name;
string sParcelLegalStartDate = pParcelsTable.Fields.get_Field(iParcLegalStartDate).Name;
string sParcelLegalEndDate = pParcelsTable.Fields.get_Field(iParcLegalEndDate).Name;
string sParcelHistoric = pParcelsTable.Fields.get_Field(iParcHistorical).Name;
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel history...";
}
pEd.StartOperation();
#region The Edit
//make change to parcels
bool bSuccess=false;
ICursor pCurs=null;
IQueryFilter pQuFilter= new QueryFilterClass();
pQuFilter.SubFields = pParcelsTable.OIDFieldName + "," + sParcelLegalEndDate + "," + sParcelLegalStartDate
+ "," + sParcelSysEndDate + "," + sParcelHistoric;
bool bSystemEndDate_Clear = pChangeHistoryDialog.chkSystemEndDate.Checked
&& pChangeHistoryDialog.optClearSEDate.Checked;
bool bLegalStDate_Clear = pChangeHistoryDialog.chkLegalStartDate.Checked
&& pChangeHistoryDialog.optClearLSDate.Checked;
bool bLegalEndDate_Clear = pChangeHistoryDialog.chkLegalEndDate.Checked
&& pChangeHistoryDialog.optClearLEDate.Checked;
bool bSystemEndDate_Set = pChangeHistoryDialog.chkSystemEndDate.Checked
&& pChangeHistoryDialog.optChooseSEDate.Checked;
bool bLegalStDate_Set = pChangeHistoryDialog.chkLegalStartDate.Checked
&& pChangeHistoryDialog.optChooseLSDate.Checked;
bool bLegalEndDate_Set = pChangeHistoryDialog.chkLegalEndDate.Checked
&& pChangeHistoryDialog.optChooseLEDate.Checked;
List<bool> bHistory = new List<bool>();
bHistory.Add(bSystemEndDate_Clear);
bHistory.Add(bLegalStDate_Clear);
bHistory.Add(bLegalEndDate_Clear);
bHistory.Add(bSystemEndDate_Set);
bHistory.Add(bLegalStDate_Set);
bHistory.Add(bLegalEndDate_Set);
List<string> sDates = new List<string>();
sDates.Add(pChangeHistoryDialog.dtSEDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLSDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLEDatePicker.Text);
pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pLinesTable, esriCadastralFabricTable.esriCFTLines); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
foreach (string sInClause in sOIDList)
{
if (sInClause.Trim() == "")
continue;
pQuFilter.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
pCurs=pParcelsTable.Update(pQuFilter,false);
bSuccess = FabricUTILS.ChangeDatesOnTableMulti(pCurs, bHistory, sDates, bUseNonVersioned,
ParcelToHistory_DICT,m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
pFabLocks.UndoLastAcquiredLocks();
if (bUseNonVersioned)
FabricUTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
}
//make change to points and lines
if (!FabricUTILS.UpdateHistoryOnLines(pLinesTable, pPointsTable, iParcelCount,
pCadFabric, sOIDList, ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel))
{
if (!bIsUnVersioned)
pFabLocks.UndoLastAcquiredLocks();
if (bUseNonVersioned)
FabricUTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
}
else
pEd.StopOperation("Change Parcel History");
#endregion
//now refresh the map layers
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
catch (Exception ex)
{
pEd.AbortOperation();
MessageBox.Show("Error:" + ex.Message);
}
finally
{
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);//set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);//set safety back on
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
Marshal.ReleaseComObject(pUID);
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IFeatureLayer CFPointLayer = null; IFeatureLayer CFLineLayer = null;
IFeatureLayer CFControlLayer = null;
IFeatureLayer CFLinePointLayer = null;
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
IProgressDialog2 pProgressorDialog = null;
clsFabricUtils UTILS = new clsFabricUtils();
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
pCadFabric = pCadEd.CadastralFabric;
if (pCadFabric == null)
{//find the first fabric in the map
if (!UTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(UTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
return; //no fabric sublayers available for the targeted fabric
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersioned = false;
IWorkspace pWS = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!UTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
return;
if (bUseNonVersioned)
{
ICadastralFabricLayer pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
Hashtable FabLyrToFieldMap = new Hashtable();
DateChanger pDateChangerDialog = new DateChanger();
pDateChangerDialog.cboBoxFabricClasses.Items.Clear();
string[] FieldStrArr = new string[CFParcelLayers.Count];
for (int i = 0; i < CFParcelLayers.Count; i++)
{
FieldStrArr[i] = "";
IFeatureLayer lyr = (IFeatureLayer)CFParcelLayers.get_Element(i);
// ICadastralFabricLayer cflyr = CFParcelLayers.get_Element(i);
pDateChangerDialog.cboBoxFabricClasses.Items.Add(lyr.Name);
IFields pFlds = lyr.FeatureClass.Fields;
for (int j = 0; j < lyr.FeatureClass.Fields.FieldCount; j++)
{
IField pFld = lyr.FeatureClass.Fields.get_Field(j);
if (pFld.Type == esriFieldType.esriFieldTypeDate)
{
if (FieldStrArr[i].Trim() == "")
FieldStrArr[i] = pFld.Name;
else
FieldStrArr[i] += "," + pFld.Name;
}
}
FabLyrToFieldMap.Add(i, FieldStrArr[i]);
}
pDateChangerDialog.FieldMap = FabLyrToFieldMap;
pDateChangerDialog.cboBoxFabricClasses.SelectedIndex = 0;
// ******** Display the dialog *********
DialogResult pDialogResult = pDateChangerDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
return;
//************************
//*** get the choices from the dialog
IFeatureLayer flyr = (IFeatureLayer)CFParcelLayers.get_Element(pDateChangerDialog.cboBoxFabricClasses.SelectedIndex);
int iDateFld = flyr.FeatureClass.Fields.FindField(pDateChangerDialog.cboBoxFields.Text);
if (pDateChangerDialog.radioButton2.Checked)
{
IField pFld = flyr.FeatureClass.Fields.get_Field(iDateFld);
if (!pFld.IsNullable)
{
MessageBox.Show("The field you selected does not allow NULL values, and must have a date." + Environment.NewLine +
"Please try again using the date option, or using a different date field.", "Field does not Allow Null", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
}
ICadastralFabricSubLayer pSubLyr = (ICadastralFabricSubLayer)flyr;
bool bLines = false;
bool bParcels = false;
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTLines)
bLines = true;
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTParcels)
bParcels = true;
//find out if there is a selection for the chosen layer
bool ChosenLayerHasSelection = false;
IFeatureSelection pFeatSel = null;
ISelectionSet2 pSelSet = null;
ICadastralSelection pCadaSel = null;
IEnumGSParcels pEnumGSParcels = null;
int iFeatureCnt = 0;
pFeatSel = (IFeatureSelection)flyr;
if (pFeatSel != null)
{
pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ChosenLayerHasSelection = (pSelSet.Count > 0);
iFeatureCnt = pSelSet.Count;
}
//****
if (iFeatureCnt == 0)
{
if (MessageBox.Show("There are no features selected in the " + flyr.Name + " layer." + Environment.NewLine + "Click OK to Change dates for ALL features in the layer.", "No Selection",
MessageBoxButtons.OKCancel) != DialogResult.OK)
return;
}
else
{
pCadaSel = (ICadastralSelection)pCadEd;
//** TODO: this enum should be based on the selected points, lines, or line-points
pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
//***
}
if (iFeatureCnt == 0)
{
m_pCursor = (ICursor)flyr.FeatureClass.Search(null, false);
ITable pTable = (ITable)flyr.FeatureClass;
iFeatureCnt = pTable.RowCount(null);
}
m_bShowProgressor = (iFeatureCnt > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iFeatureCnt;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting data...";
}
bool bCont = true;
m_pFIDSetParcels = new FIDSetClass();
if (ChosenLayerHasSelection && bParcels && !bIsUnVersioned)
{
//if there is a selection add the OIDs of all the selected parcels into a new feature IDSet
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
break;
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
//}
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
m_pStepProgressor.Step();
}
}
}
if ((!ChosenLayerHasSelection && bParcels && !bIsUnVersioned) ||
(!ChosenLayerHasSelection && bLines && !bIsUnVersioned))
{
IRow pRow = m_pCursor.NextRow();
while (pRow != null)
{
m_pFIDSetParcels.Add(pRow.OID);
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
if (bLines && ChosenLayerHasSelection && !bIsUnVersioned)
{
pSelSet.Search(null, false, out m_pCursor);
IRow pRow = m_pCursor.NextRow();
int iFld = m_pCursor.FindField("PARCELID");
while (pRow != null)
{
m_pFIDSetParcels.Add((int)pRow.get_Value(iFld));
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
//=========================================================
if (!bCont)
{
//Since I'm using update cursor need to clear the cadastral selection
pCadaSel.SelectedParcels = null;
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
string sTime = "";
if (!bIsUnVersioned)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Change Date on selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
pProgressorDialog.HideDialog();
pProgressorDialog = null;
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
UTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_pStepProgressor != null && !bIsFileBasedGDB)
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
else
{
MessageBox.Show(Convert.ToString(pCOMEx.ErrorCode));
}
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
}
//Now... start the edit. Start an edit operation.
if (pEd.EditState == esriEditState.esriStateEditing)
pEd.StartOperation();
if (bUseNonVersioned)
{
if (!UTILS.StartEditing(pWS, bUseNonVersioned))
{
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
}
//Change all the date records
if (m_pStepProgressor != null)
m_pStepProgressor.Message = "Changing dates...";
bool bSuccess = true;
ITable Table2Edit = (ITable)flyr.FeatureClass;
ITableWrite pTableWr = (ITableWrite)Table2Edit;
if (ChosenLayerHasSelection)
//TODO: Selection based update does not work on unversioned tables
//need to change this code to create an update cursor from the selection,
//including code for tokens > 995
pSelSet.Update(null, false, out m_pCursor);
else
{
if (bUseNonVersioned)
{
m_pCursor = pTableWr.UpdateRows(null, false);
}
else
m_pCursor = Table2Edit.Update(null, false);
}
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
if (bLines)
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLines); //release safety-catch
else if (bParcels)
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTParcels); //release safety-catch
else
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
if (pDateChangerDialog.radioButton2.Checked)
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text, "",
bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
else
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text,
pDateChangerDialog.dateTimePicker1.Text, bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
pFabLocks.UndoLastAcquiredLocks();
if (bUseNonVersioned)
UTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
if (pEd.EditState == esriEditState.esriStateEditing)
pEd.StopOperation("Change Date");
if (bUseNonVersioned)
UTILS.StopEditing(pWS);
if (bParcels)
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
else if (bLines)
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);
else
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
}
catch (Exception ex)
{
MessageBox.Show("Error:" + ex.Message);
if (bUseNonVersioned)
UTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
pProgressorDialog.HideDialog();
pProgressorDialog = null;
}
}
