private void RETC_Handler(Instruction instruction)
{
runtimeVerify(rmem.ValidateStackFrame());
RX = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexThisPtr);
int ci = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexClass).opdata;
int fi = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunction).opdata;
pc = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexReturnAddress).opdata;
// block id is used in ReturnSiteGC to get the procedure node if it is not a member function
// not meaningful here, because we are inside a constructor
int blockId = (int)SX.opdata;
if (core.ExecMode != ProtoCore.DSASM.InterpreterMode.kExpressionInterpreter)
{
ReturnSiteGC(blockId, ci, fi);
}
RestoreFromCall();
core.RunningBlock = executingBlock;
// If we're returning from a block to a function, the instruction stream needs to be restored.
StackValue sv = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexRegisterTX);
Validity.Assert(AddressType.CallingConvention == sv.optype);
CallingConvention.CallType callType = (CallingConvention.CallType)sv.opdata;
bool explicitCall = CallingConvention.CallType.kExplicit == callType || CallingConvention.CallType.kExplicitBase == callType;
isExplicitCall = explicitCall;
if (!core.Options.IDEDebugMode || core.ExecMode == InterpreterMode.kExpressionInterpreter)
{
int localCount = 0;
int paramCount = 0;
GetLocalAndParamCount(blockId, ci, fi, out localCount, out paramCount);
rmem.FramePointer = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFramePointer).opdata;
rmem.PopFrame(ProtoCore.DSASM.StackFrame.kStackFrameSize + localCount + paramCount);
if (core.ExecMode != InterpreterMode.kExpressionInterpreter)
{
// Restoring the registers require the current frame pointer of the stack frame
RestoreRegistersFromStackFrame();
bounceType = (ProtoCore.DSASM.CallingConvention.BounceType)TX.opdata;
}
}
terminate = !explicitCall;
Properties = PopInterpreterProps();
ProcedureNode procNode = GetProcedureNode(blockId, ci, fi);
if (explicitCall)
{
//RX = CallSite.PerformReturnTypeCoerce(procNode, core, RX);
bool wasDebugPropsPopped = DebugReturn(procNode, pc);
// Comment Jun: For explicit calls, we need to manually GC decrement the arguments.
// These arguments were GC incremented on callr
if (!wasDebugPropsPopped)
//if (!core.Options.IDEDebugMode || core.ExecMode == ExecutionMode.kExpressionInterpreter)
{
for (int i = 0; i < Properties.functionCallArguments.Count; ++i)
{
GCUtils.GCRelease(Properties.functionCallArguments[i], core);
}
}
if (CallingConvention.CallType.kExplicitBase != callType)
{
//if (!core.Options.IDEDebugMode || core.ExecMode == ExecutionMode.kExpressionInterpreter)
if (!wasDebugPropsPopped)
{
DecRefCounter(RX);
}
}
}
return;
}
private void EmitAllocc(int type)
{
SetEntry();
Instruction instr = new Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.ALLOCC;
instr.op1 = StackValue.BuildClassIndex(type);
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
}
protected void EmitJumpDependency()
{
EmitInstrConsole(ProtoCore.DSASM.kw.jdep);
Instruction instr = new Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.JDEP;
++pc;
codeBlock.instrStream.instrList.Add(instr);
}
private void EmitPushDep(int block, int depth, int classScope)
{
EmitInstrConsole(ProtoCore.DSASM.kw.pushdep, block.ToString() + "[block]", depth.ToString() + "[depth]", classScope.ToString() + "[classScope]");
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.PUSHDEP;
ProtoCore.DSASM.StackValue opBlock = new ProtoCore.DSASM.StackValue();
opBlock.optype = ProtoCore.DSASM.AddressType.BlockIndex;
opBlock.opdata = block;
ProtoCore.DSASM.StackValue opDepth = new ProtoCore.DSASM.StackValue();
opDepth.optype = ProtoCore.DSASM.AddressType.Int;
opDepth.opdata = depth;
ProtoCore.DSASM.StackValue opClass = new ProtoCore.DSASM.StackValue();
opClass.optype = ProtoCore.DSASM.AddressType.ClassIndex;
opClass.opdata = classScope;
instr.op1 = opBlock;
instr.op2 = opDepth;
instr.op3 = opClass;
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
}
private void EmitSetExpressionUID(int exprId)
{
EmitInstrConsole(ProtoCore.DSASM.kw.setexpuid, exprId.ToString() + "[exprId]");
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.SETEXPUID;
ProtoCore.DSASM.StackValue opExId = new ProtoCore.DSASM.StackValue();
opExId.optype = ProtoCore.DSASM.AddressType.Int;
opExId.opdata = exprId;
instr.op1 = opExId;
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
}
private void Exec(Instruction instruction)
{
switch (instruction.opCode)
{
case OpCode.ALLOC:
{
ALLOC_Handler(instruction);
return;
}
case OpCode.ALLOCC:
{
ALLOCC_Handler(instruction);
return;
}
case OpCode.ALLOCM:
{
ALLOCM_Handler(instruction);
return;
}
case OpCode.PUSH:
{
PUSH_Handler(instruction);
return;
}
case OpCode.PUSHW:
{
PUSHW_Handler(instruction);
return;
}
case OpCode.PUSHINDEX:
{
PUSHINDEX_Handler(instruction);
return;
}
case OpCode.PUSHG:
{
PUSHG_Handler(instruction);
return;
}
case OpCode.PUSHB:
{
PUSHB_Handler(instruction);
return;
}
case OpCode.POPB:
{
POPB_Handler(instruction);
return;
}
case OpCode.PUSHM:
{
PUSHM_Handler(instruction);
return;
}
case OpCode.PUSHLIST:
{
PUSHLIST_Handler(instruction);
return;
}
case OpCode.PUSH_ARRAYKEY:
{
PUSH_VARSIZE_Handler(instruction);
return;
}
case OpCode.POP:
{
POP_Handler(instruction);
return;
}
case OpCode.POPW:
{
POPW_Handler(instruction);
return;
}
case OpCode.POPG:
{
POPG_Handler(instruction);
return;
}
case OpCode.POPM:
{
POPM_Handler(instruction);
return;
}
case OpCode.POPLIST:
{
POPLIST_Handler(instruction);
return;
}
case OpCode.MOV:
{
MOV_Handler(instruction);
return;
}
case OpCode.ADD:
{
ADD_Handler(instruction);
return;
}
case OpCode.ADDD:
{
ADDD_Handler(instruction);
return;
}
case OpCode.SUB:
{
SUB_Handler(instruction);
return;
}
case OpCode.SUBD:
{
SUBD_Handler(instruction);
return;
}
case OpCode.MUL:
{
MUL_Handler(instruction);
return;
}
case OpCode.MULD:
{
MULD_Handler(instruction);
return;
}
case OpCode.DIV:
{
DIV_Handler(instruction);
return;
}
case OpCode.DIVD:
{
DIVD_Handler(instruction);
return;
}
case OpCode.MOD:
{
MOD_Handler(instruction);
return;
}
#if ENABLE_BIT_OP
case OpCode.BITAND:
{
BITAND_HANDLER(instruction);
return;
}
case OpCode.BITOR:
{
BITOR_HANDLER(instruction);
return;
}
case OpCode.BITXOR:
{
BITXOR_HANDLER(instruction);
return;
}
case OpCode.NEGATE:
{
NEGATE_HAndler(instruction);
return;
#endif
case OpCode.NEG:
{
NEG_Handler(instruction);
return;
}
case OpCode.AND:
{
AND_Handler(instruction);
return;
}
case OpCode.OR:
{
OR_Handler(instruction);
return;
}
case OpCode.NOT:
{
NOT_Handler(instruction);
return;
}
case OpCode.EQ:
{
EQ_Handler(instruction);
return;
}
case OpCode.EQD:
{
EQD_Handler(instruction);
return;
}
case OpCode.NQ:
{
NQ_Handler(instruction);
return;
}
case OpCode.NQD:
{
NQD_Handler(instruction);
return;
}
case OpCode.GT:
{
GT_Handler(instruction);
return;
}
case OpCode.GTD:
{
GTD_Handler(instruction);
return;
}
case OpCode.LT:
{
LT_Handler(instruction);
return;
}
case OpCode.LTD:
{
LTD_Handler(instruction);
return;
}
case OpCode.GE:
{
GE_Handler(instruction);
return;
}
case OpCode.GED:
{
GED_Handler(instruction);
return;
}
case OpCode.LE:
{
LE_Handler(instruction);
return;
}
case OpCode.LED:
{
LED_Handler(instruction);
return;
}
case OpCode.ALLOCA:
{
ALLOCA_Handler(instruction);
return;
}
case OpCode.BOUNCE:
{
BOUNCE_Handler(instruction);
return;
}
case OpCode.CALL:
{
CALL_Handler(instruction);
return;
}
case OpCode.CALLC:
{
CALLC_Handler(instruction);
return;
}
case OpCode.CALLR:
{
CALLR_Handler(instruction);
return;
}
case OpCode.RETC:
{
RETC_Handler(instruction);
return;
}
case OpCode.RETB:
{
RETB_Handler(instruction);
return;
}
case OpCode.RETCN:
{
RETCN_Handler(instruction);
return;
}
case OpCode.RETURN:
{
RETURN_Handler(instruction);
return;
}
case OpCode.JMP:
{
JMP_Handler(instruction);
return;
}
case OpCode.CJMP:
{
CJMP_Handler(instruction);
return;
}
case OpCode.JMP_EQ:
{
JMP_EQ_Handler(instruction);
return;
}
case OpCode.JMP_GT:
{
JMP_GT_Handler(instruction);
return;
}
case OpCode.JMP_GTEQ:
{
JMP_GTEQ_Handler(instruction);
return;
}
case OpCode.JMP_LT:
{
JMP_LT_Handler(instruction);
return;
}
case OpCode.JMP_LTEQ:
{
JMP_LTEQ_Handler(instruction);
return;
}
case OpCode.JMP_NEQ:
{
JMP_NEQ_Handler(instruction);
return;
}
case OpCode.JLZ:
{
JLZ_Handler(instruction);
return;
}
case OpCode.JGZ:
{
JGZ_Handler(instruction);
return;
}
case OpCode.JZ:
{
JZ_Handler(instruction);
return;
}
case OpCode.CAST:
{
CAST_Handler(instruction);
return;
}
case OpCode.DEP:
{
DEP_Handler(instruction);
return;
}
case OpCode.PUSHDEP:
{
PUSHDEP_Handler(instruction);
return;
}
case OpCode.DEPX:
{
DEPX_Handler(instruction);
return;
}
case OpCode.THROW:
{
THROW_Handler(instruction);
return;
}
case OpCode.SETEXPUID:
{
SETEXPUID_Handler(instruction);
return;
}
default: //Unknown OpCode
throw new NotImplementedException("Unknown Op code, NIE Marker: {D6028708-CD47-4D0B-97FC-E681BD65DB5C}");
}
}
private void EmitAllocc(int type)
{
SetEntry();
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.ALLOCC;
ProtoCore.DSASM.StackValue op = new ProtoCore.DSASM.StackValue();
op.optype = ProtoCore.DSASM.AddressType.ClassIndex;
op.opdata = type;
instr.op1 = op;
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
}
private void JMP_GT_Handler(Instruction instruction)
{
StackValue opdata1 = GetOperandData(instruction.op1);
StackValue opdata2 = GetOperandData(instruction.op2);
bool isGT = false;
if (AddressType.Double == opdata1.optype || AddressType.Double == opdata2.optype)
{
isGT = opdata1.opdata_d > opdata2.opdata_d;
}
else
{
isGT = opdata1.opdata > opdata2.opdata;
}
if (isGT)
{
pc = (int)instruction.op3.opdata;
}
else
{
++pc;
}
return;
}
private void JMP_LT_Handler(Instruction instruction)
{
StackValue opdata1 = GetOperandData(instruction.op1);
StackValue opdata2 = GetOperandData(instruction.op2);
if (AddressType.Double == opdata1.optype || AddressType.Double == opdata2.optype)
{
if (opdata1.opdata_d < opdata2.opdata_d)
{
pc = (int)instruction.op3.opdata;
}
else
{
++pc;
}
}
else
{
if (opdata1.opdata < opdata2.opdata)
{
pc = (int)instruction.op3.opdata;
}
else
{
++pc;
}
}
return;
}
private void JMP_Handler(Instruction instruction)
{
pc = (int)instruction.op1.opdata;
return;
}
private void CJMP_Handler(Instruction instruction)
{
StackValue opdata1 = GetOperandData(instruction.op1);
if (opdata1.optype == ProtoCore.DSASM.AddressType.Double)
{
if (0 == opdata1.opdata_d)
{
pc = (int)GetOperandData(instruction.op3).opdata;
}
else
{
pc = (int)GetOperandData(instruction.op2).opdata;
}
}
else
{
if (opdata1.optype == ProtoCore.DSASM.AddressType.Pointer)
{
pc = (int)GetOperandData(instruction.op2).opdata;
}
else if (0 == opdata1.opdata)
{
pc = (int)GetOperandData(instruction.op3).opdata;
}
else
{
pc = (int)GetOperandData(instruction.op2).opdata;
}
}
return;
}
private void RETURN_Handler(Instruction instruction)
{
isGlobScope = true;
runtimeVerify(rmem.ValidateStackFrame());
int ptr = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexThisPtr).opdata;
int ci = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexClass).opdata;
int fi = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunction).opdata;
int blockId = (int)SX.opdata;
StackValue svBlockDecl = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexRegisterSX);
Validity.Assert(AddressType.BlockIndex == svBlockDecl.optype);
blockId = (int)svBlockDecl.opdata;
ProcedureNode procNode = GetProcedureNode(blockId, ci, fi);
if (core.Options.ExecuteSSA)
{
if (core.Options.GCTempVarsOnDebug && core.Options.IDEDebugMode)
{
// GC anonymous variables in the return stmt
if (null != Properties.executingGraphNode && !Properties.executingGraphNode.IsSSANode())
{
GCAnonymousSymbols(Properties.executingGraphNode.symbolListWithinExpression);
Properties.executingGraphNode.symbolListWithinExpression.Clear();
}
}
}
pc = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexReturnAddress).opdata;
executingBlock = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunctionCallerBlock).opdata;
if (core.ExecMode != ProtoCore.DSASM.InterpreterMode.kExpressionInterpreter)
{
ReturnSiteGC(blockId, ci, fi);
}
RestoreFromCall();
core.RunningBlock = executingBlock;
// If we're returning from a block to a function, the instruction stream needs to be restored.
StackValue sv = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexRegisterTX);
Validity.Assert(AddressType.CallingConvention == sv.optype);
CallingConvention.CallType callType = (CallingConvention.CallType)sv.opdata;
bool explicitCall = CallingConvention.CallType.kExplicit == callType;
isExplicitCall = explicitCall;
List<bool> execStateRestore = new List<bool>();
if (!core.Options.IDEDebugMode || core.ExecMode == InterpreterMode.kExpressionInterpreter)
{
// Get stack frame size
int localCount = 0;
int paramCount = 0;
GetLocalAndParamCount(blockId, ci, fi, out localCount, out paramCount);
// Retrieve the execution execution states
int execstates = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexExecutionStates).opdata;
if (execstates > 0)
{
int offset = ProtoCore.DSASM.StackFrame.kStackFrameSize + localCount + paramCount;
for (int n = 0; n < execstates; ++n)
{
int relativeIndex = -offset - n - 1;
StackValue svState = rmem.GetAtRelative(relativeIndex);
Validity.Assert(svState.optype == AddressType.Boolean);
execStateRestore.Add(svState.opdata == 0 ? false : true);
}
}
// Pop the stackframe
rmem.FramePointer = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFramePointer).opdata;
// Get the size of the stackframe and all variable size contents (local, args and exec states)
int stackFrameSize = ProtoCore.DSASM.StackFrame.kStackFrameSize + localCount + paramCount + execstates;
rmem.PopFrame(stackFrameSize);
if (core.ExecMode != InterpreterMode.kExpressionInterpreter)
{
// Restoring the registers require the current frame pointer of the stack frame
RestoreRegistersFromStackFrame();
bounceType = (ProtoCore.DSASM.CallingConvention.BounceType)TX.opdata;
}
}
terminate = !explicitCall;
// Comment Jun: Dispose calls are always implicit and need to terminate
// TODO Jun: This instruction should not know about dispose
bool isDispose = CoreUtils.IsDisposeMethod(procNode.name);
if (isDispose)
{
terminate = true;
}
// Let the return graphNode always be active
if (null != Properties.executingGraphNode)
{
Properties.executingGraphNode.isDirty = true;
}
Properties = PopInterpreterProps();
if (explicitCall)
{
bool wasDebugPropsPopped = false;
if (!isDispose)
{
wasDebugPropsPopped = DebugReturn(procNode, pc);
}
// This condition should only be reached in the following cases:
// 1. Debug StepOver or External Function call in non-replicating mode
// 2. Normal execution in Serial (explicit call), non-replicating mode
if (!wasDebugPropsPopped)
{
RX = CallSite.PerformReturnTypeCoerce(procNode, core, RX);
// Comment Jun: For explicit calls, we need to manually GC decrement the arguments passed into the function
// These arguments were GC incremented on callr
for (int i = 0; i < Properties.functionCallArguments.Count; ++i)
{
GCUtils.GCRelease(Properties.functionCallArguments[i], core);
}
StackValue svRet = RX;
GCDotMethods(procNode.name, ref svRet, Properties.functionCallDotCallDimensions, Properties.functionCallArguments);
DecRefCounter(svRet);
RX = svRet;
}
}
// Restore the execution states
if (execStateRestore.Count > 0)
{
// Now that the stack frame is popped off, we can retrieve the returned scope
// Get graphnodes at the current scope after the return
int currentScopeClass = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexClass).opdata;
int currentScopeFunction = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunction).opdata;
bool isReturningFromRecursiveCall = procNode.procId == currentScopeFunction;
if (isReturningFromRecursiveCall)
{
// Since there are execution states retrieved from the stack frame,
// this means that we must be returning to a function and not the global scope
Validity.Assert(currentScopeFunction != ProtoCore.DSASM.Constants.kGlobalScope);
// Get the instruction stream where the current function resides in
StackValue svCurrentFunctionBlockDecl = rmem.GetAtRelative(rmem.GetStackIndex(ProtoCore.DSASM.StackFrame.kFrameIndexFunctionBlock));
Validity.Assert(svCurrentFunctionBlockDecl.optype == AddressType.BlockIndex);
AssociativeGraph.DependencyGraph depgraph = exe.instrStreamList[(int)svCurrentFunctionBlockDecl.opdata].dependencyGraph;
List<AssociativeGraph.GraphNode> graphNodesInScope = depgraph.GetGraphNodesAtScope(currentScopeClass, currentScopeFunction);
Validity.Assert(execStateRestore.Count == graphNodesInScope.Count);
for (int n = 0; n < execStateRestore.Count; ++n)
{
graphNodesInScope[n].isDirty = execStateRestore[n];
}
}
}
return;
}
private void RETCN_Handler(Instruction instruction)
{
if (core.ExecMode != InterpreterMode.kExpressionInterpreter)
{
core.Rmem.PopConstructBlockId();
}
StackValue op1 = instruction.op1;
runtimeVerify(op1.optype == AddressType.BlockIndex);
int blockId = (int)op1.opdata;
CodeBlock codeBlock = core.CompleteCodeBlockList[blockId];
runtimeVerify(codeBlock.blockType == CodeBlockType.kConstruct);
GCCodeBlock(blockId);
pc++;
return;
}
private void RETB_Handler(Instruction instruction)
{
if (core.ExecMode != InterpreterMode.kExpressionInterpreter)
{
core.Rmem.PopConstructBlockId();
}
if (!core.Options.IsDeltaExecution || (core.Options.IsDeltaExecution && 0 != core.RunningBlock))
{
GCCodeBlock(core.RunningBlock);
}
if (ProtoCore.DSASM.CallingConvention.BounceType.kExplicit == bounceType)
{
RestoreFromBounce();
core.RunningBlock = executingBlock;
}
if (ProtoCore.DSASM.CallingConvention.BounceType.kImplicit == bounceType)
{
pc = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexReturnAddress).opdata;
terminate = true;
}
ProtoCore.DSASM.StackFrameType type = StackFrameType.kTypeLanguage;
// Comment Jun: Just want to see if this is the global rerb, in which case we dont retrieve anything
//if (executingBlock > 0)
{
StackValue svCallerType = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexCallerStackFrameType);
type = (ProtoCore.DSASM.StackFrameType)svCallerType.opdata;
}
// Pop the frame as we are adding stackframes for language blocks as well - pratapa
// Do not do this for the final Retb
//if (core.RunningBlock != 0)
if (!core.Options.IDEDebugMode || core.ExecMode == InterpreterMode.kExpressionInterpreter)
{
rmem.FramePointer = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFramePointer).opdata;
rmem.PopFrame(ProtoCore.DSASM.StackFrame.kStackFrameSize);
if (bounceType == CallingConvention.BounceType.kExplicit)
{
// Restoring the registers require the current frame pointer of the stack frame
RestoreRegistersFromStackFrame();
bounceType = (ProtoCore.DSASM.CallingConvention.BounceType)TX.opdata;
#if ENABLE_EXCEPTION_HANDLING
core.ExceptionHandlingManager.CurrentActiveRegistration = core.stackActiveExceptionRegistration.Pop();
if (core.ExceptionHandlingManager.IsStackUnwinding)
{
#region __MERGE_WITH_STACKUNWIND
// The excecution of last langage block is interrupted
// abnormally because of stack unwinding, so we need to
// run GC to reclaim those allocated memory.
GCCodeBlock(core.RunningBlock);
int newpc = ProtoCore.DSASM.Constants.kInvalidIndex;
if (core.ExceptionHandlingManager.CanHandleIt(ref newpc))
{
LX = RX;
pc = newpc;
core.ExceptionHandlingManager.SetHandled();
}
// else cannot handle in this scope, so in the next
// loop of Execute(), current executive will be ;
// ended and returns to the last scope, continues
// stack unwinding
int origRunningBlock = executingBlock;
core.RunningBlock = origRunningBlock;
#endregion
}
else
{
DecRefCounter(RX);
}
#else
DecRefCounter(RX);
#endif
}
}
else
{
DecRefCounter(RX);
}
if (type == StackFrameType.kTypeFunction)
{
// Comment Jun:
// Consider moving this to a restore to function method
// If this language block was called explicitly, only then do we need to restore the instruction stream
if (bounceType == CallingConvention.BounceType.kExplicit)
{
// If we're returning from a block to a function, the instruction stream needs to be restored.
StackValue sv = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexRegisterTX);
Validity.Assert(AddressType.CallingConvention == sv.optype);
CallingConvention.CallType callType = (CallingConvention.CallType)sv.opdata;
if (CallingConvention.CallType.kExplicit == callType)
{
int callerblock = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunctionBlock).opdata;
istream = exe.instrStreamList[callerblock];
}
}
}
Properties = PopInterpreterProps();
return;
}
private void THROW_Handler(Instruction instruction)
{
#if ENABLE_EXCEPTION_HANDLING
runtimeVerify(ProtoCore.DSASM.AddressType.BlockIndex == instruction.op1.optype);
int blockId = (int)instruction.op1.opdata;
runtimeVerify(ProtoCore.DSASM.AddressType.ClassIndex == instruction.op2.optype);
int classScope = (int)instruction.op2.opdata;
runtimeVerify(ProtoCore.DSASM.AddressType.FunctionIndex == instruction.op3.optype);
int functionScope = (int)instruction.op3.opdata;
StackValue exceptionValue = LX;
ProtoCore.Exceptions.ExceptionContext context = new Exceptions.ExceptionContext();
context.pc = pc;
context.codeBlockId = blockId;
context.functionScope = functionScope;
context.classScope = classScope;
switch (exceptionValue.optype)
{
case AddressType.Int:
context.typeUID = (int)ProtoCore.PrimitiveType.kTypeInt;
break;
case AddressType.Double:
context.typeUID = (int)ProtoCore.PrimitiveType.kTypeDouble;
break;
case AddressType.Boolean:
context.typeUID = (int)ProtoCore.PrimitiveType.kTypeBool;
break;
case AddressType.Pointer:
context.typeUID = (int)exceptionValue.metaData.type;
break;
default:
context.typeUID = (int)ProtoCore.PrimitiveType.kTypeVar;
break;
}
// Walk through exception chain, a.k.a. 1st hand exception
// handling
core.ExceptionHandlingManager.HandleFirstHandException(context);
// The exception can be handled in current scope, so simply jmp to
// the corresponding catch block
int newpc = ProtoCore.DSASM.Constants.kInvalidIndex;
if (core.ExceptionHandlingManager.CanHandleIt(ref newpc))
{
pc = newpc;
core.ExceptionHandlingManager.SetHandled();
}
else
{
RX = LX;
}
if (core.ExceptionHandlingManager.IsStackUnwinding)
{
while (core.stackActiveExceptionRegistration.Count > 1)
{
StackValue svType = rmem.GetAtRelative(StackFrame.kFrameIndexStackFrameType);
StackFrameType type = (StackFrameType)svType.opdata;
if (StackFrameType.kTypeLanguage == type)
{
RestoreFromBounce();
rmem.FramePointer = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFramePointer).opdata;
rmem.PopFrame(ProtoCore.DSASM.StackFrame.kStackFrameSize);
// Restoring the registers require the current frame pointer of the stack frame
RestoreRegistersFromStackFrame();
bounceType = (ProtoCore.DSASM.CallingConvention.BounceType)TX.opdata;
core.ExceptionHandlingManager.CurrentActiveRegistration = core.stackActiveExceptionRegistration.Pop();
#region __MERGE_WITH_STACKUNWIND
// The excecution of last langage block is interrupted
// abnormally because of stack unwinding, so we need to
// run GC to reclaim those allocated memory.
GCCodeBlock(core.RunningBlock);
newpc = ProtoCore.DSASM.Constants.kInvalidIndex;
if (core.ExceptionHandlingManager.CanHandleIt(ref newpc))
{
LX = RX;
pc = newpc;
core.ExceptionHandlingManager.SetHandled();
break;
}
// else cannot handle in this scope, so in the next
// loop of Execute(), current executive will be ;
// ended and returns to the last scope, continues
// stack unwinding
int origRunningBlock = executingBlock;
core.RunningBlock = origRunningBlock;
#endregion
}
else
{
RestoreFromCall();
int ci = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexClass).opdata;
int fi = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunction).opdata;
int localCount = 0;
int paramCount = 0;
GetLocalAndParamCount(executingBlock, ci, fi, out localCount, out paramCount);
rmem.FramePointer = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFramePointer).opdata;
rmem.PopFrame(ProtoCore.DSASM.StackFrame.kStackFrameSize + localCount + paramCount);
}
}
}
return;
#else
throw new NotImplementedException();
#endif
}
private void JMP_NEQ_Handler(Instruction instruction)
{
StackValue opdata1 = GetOperandData(instruction.op1);
StackValue opdata2 = GetOperandData(instruction.op2);
if (AddressType.Double == opdata1.optype || AddressType.Double == opdata2.optype)
{
if (!MathUtils.Equals(opdata1.opdata_d, opdata2.opdata_d))
{
pc = (int)instruction.op3.opdata;
}
else
{
++pc;
}
}
else
{
if (opdata1.opdata != opdata2.opdata)
{
pc = (int)instruction.op3.opdata;
}
else
{
++pc;
}
}
return;
}
private void SETEXPUID_Handler(Instruction instruction)
{
if (core.Options.IDEDebugMode && core.ExecMode != InterpreterMode.kExpressionInterpreter)
{
if (core.DebugProps.RunMode == Runmode.StepNext)
{
if (!core.DebugProps.DebugStackFrameContains(DebugProperties.StackFrameFlagOptions.IsFunctionStepOver))
{
// if ec is at end of an expression in imperative lang block
// we force restore the breakpoints
core.Breakpoints.Clear();
core.Breakpoints.AddRange(core.DebugProps.AllbreakPoints);
}
}
}
pc++;
return;
}
private void JGZ_Handler(Instruction instruction)
{
StackValue opdata1 = GetOperandData(instruction.op1);
if (opdata1.opdata_d > 0)
{
pc = (int)instruction.op2.opdata;
}
else
{
++pc;
}
return;
}
//protected override void EmitDependency(int exprUID, bool isSSAAssign)
protected void EmitDependency(int exprUID, int modBlkUID, bool isSSAAssign)
{
SetEntry();
EmitInstrConsole(ProtoCore.DSASM.kw.dep, exprUID.ToString() + "[ExprUID]", isSSAAssign.ToString() + "[SSA]");
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.DEP;
ProtoCore.DSASM.StackValue opExprId = new ProtoCore.DSASM.StackValue();
opExprId.optype = ProtoCore.DSASM.AddressType.Int;
opExprId.opdata = exprUID;
instr.op1 = opExprId;
ProtoCore.DSASM.StackValue opIsSSA = new ProtoCore.DSASM.StackValue();
opIsSSA.optype = ProtoCore.DSASM.AddressType.Int;
opIsSSA.opdata = (isSSAAssign) ? 1 : 0;
instr.op2 = opIsSSA;
ProtoCore.DSASM.StackValue opModBlkId = new ProtoCore.DSASM.StackValue();
opModBlkId.optype = ProtoCore.DSASM.AddressType.Int;
opModBlkId.opdata = modBlkUID;
instr.op3 = opModBlkId;
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
}
private void JZ_Handler(Instruction instruction)
{
StackValue opdata1 = GetOperandData(instruction.op1);
if (MathUtils.Equals(opdata1.opdata_d, 0))
{
pc = (int)instruction.op2.opdata;
}
else
{
++pc;
}
return;
}
private void EmitRetc(int line = ProtoCore.DSASM.Constants.kInvalidIndex, int col = ProtoCore.DSASM.Constants.kInvalidIndex,
int eline = ProtoCore.DSASM.Constants.kInvalidIndex, int ecol = ProtoCore.DSASM.Constants.kInvalidIndex)
{
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.RETC;
++pc;
instr.debug = GetDebugObject(line, col, eline, ecol, ProtoCore.DSASM.Constants.kInvalidIndex);
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr, line, col);
updatePcDictionary(line, col);
}
private void CAST_Handler(Instruction instruction)
{
++pc;
return;
}
private void EmitPushVarSize(int symbol, int block, int classIndex)
{
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.PUSH_VARSIZE;
ProtoCore.DSASM.StackValue op1 = new ProtoCore.DSASM.StackValue();
op1.optype = ProtoCore.DSASM.AddressType.VarIndex;
op1.opdata = symbol;
instr.op1 = op1;
ProtoCore.DSASM.StackValue op2 = new ProtoCore.DSASM.StackValue();
op2.optype = ProtoCore.DSASM.AddressType.BlockIndex;
op2.opdata = block;
instr.op2 = op2;
ProtoCore.DSASM.StackValue op3 = new ProtoCore.DSASM.StackValue();
op3.optype = ProtoCore.DSASM.AddressType.ClassIndex;
op3.opdata = classIndex;
instr.op3 = op3;
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
}
//instruction dep(block, symbol)
// def sv = stack.get(block,symbol)
// if sv is not equal to _dx (i.e. is dirty)
// // An update is triggered
// // Find all graph nodes whos dependents contain this symbol
// // Mark those nodes as dirty
// for n = 0 to graphNodeList.size n++
// def index = graphNodeList[n].Contains(block,symbol)
// if index is valid
// graphNodeList[n].isDirty = true
// break
// end
// end
// end
// SetupDependencyGraph()
//end
private void DEP_Handler(Instruction instruction)
{
// This expression ID of this instruction
runtimeVerify(ProtoCore.DSASM.AddressType.Int == instruction.op1.optype);
int exprID = (int)instruction.op1.opdata;
// The SSA assignment flag
runtimeVerify(ProtoCore.DSASM.AddressType.Int == instruction.op2.optype);
bool isSSA = (1 == (int)instruction.op2.opdata) ? true : false;
runtimeVerify(ProtoCore.DSASM.AddressType.Int == instruction.op3.optype);
int modBlkID = (int)instruction.op3.opdata;
// The current function and class scope
int ci = DSASM.Constants.kInvalidIndex;
int fi = DSASM.Constants.kGlobalScope;
bool isInFunction = core.FunctionCallDepth > 0;
StackValue svType = rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexStackFrameType);
ProtoCore.DSASM.StackFrameType type = (ProtoCore.DSASM.StackFrameType)svType.opdata;
isInFunction = IsInsideFunction();
if (core.Options.IDEDebugMode && core.ExecMode != InterpreterMode.kExpressionInterpreter)
{
Validity.Assert(core.DebugProps.DebugStackFrame.Count > 0);
{
isInFunction = core.DebugProps.DebugStackFrameContains(DebugProperties.StackFrameFlagOptions.FepRun);
}
}
if (isInFunction)
{
ci = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexClass).opdata;
fi = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunction).opdata;
}
if (null != Properties.executingGraphNode)
{
// Append this modified graph into the x-lang list
if (!isSSA && (Properties.executingGraphNode.updateNodeRefList.Count > 0))
{
if (!istream.xUpdateList.Contains(Properties.executingGraphNode.updateNodeRefList[0]))
{
istream.xUpdateList.Add(Properties.executingGraphNode.updateNodeRefList[0]);
}
}
if (core.Options.ExecuteSSA)
{
if (core.Options.GCTempVarsOnDebug && core.Options.IDEDebugMode)
{
if (!Properties.executingGraphNode.IsSSANode())
{
bool isSetter = Properties.executingGraphNode.updateNodeRefList[0].nodeList.Count > 1;
GCAnonymousSymbols(Properties.executingGraphNode.symbolListWithinExpression, isSetter);
Properties.executingGraphNode.symbolListWithinExpression.Clear();
}
}
}
if (core.Options.ExecuteSSA)
{
if (!Properties.executingGraphNode.IsSSANode())
{
foreach (AssociativeGraph.GraphNode gnode in deferedGraphNodes)
{
gnode.isDirty = true;
}
deferedGraphNodes.Clear();
}
}
}
UpdateGraph(exprID, modBlkID, isSSA);
// Get the next graph to be executed
SetupNextExecutableGraph(fi, ci);
return;
}
protected override void EmitRetcn(int blockId = Constants.kInvalidIndex, int line = ProtoCore.DSASM.Constants.kInvalidIndex, int col = ProtoCore.DSASM.Constants.kInvalidIndex,
int endline = ProtoCore.DSASM.Constants.kInvalidIndex, int endcol = ProtoCore.DSASM.Constants.kInvalidIndex)
{
ProtoCore.DSASM.Instruction instr = new ProtoCore.DSASM.Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.RETCN;
ProtoCore.DSASM.StackValue op1 = new ProtoCore.DSASM.StackValue();
op1.optype = AddressType.BlockIndex;
op1.opdata = blockId;
instr.op1 = op1;
AuditReturnLocationFromCodeBlock(ref line, ref col, ref endline, ref endcol);
++pc;
instr.debug = GetDebugObject(line, col, endline, endcol, pc);
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr, line, col);
updatePcDictionary(line, col);
}
private void PUSHDEP_Handler(Instruction instruction)
{
// The symbol block
runtimeVerify(ProtoCore.DSASM.AddressType.BlockIndex == instruction.op1.optype);
int block = (int)instruction.op1.opdata;
runtimeVerify(ProtoCore.DSASM.AddressType.Int == instruction.op2.optype);
int depth = (int)instruction.op2.opdata;
// The symbol and its class index
runtimeVerify(ProtoCore.DSASM.AddressType.ClassIndex == instruction.op3.optype);
int classIndex = (int)instruction.op3.opdata;
// Get the identifier list
List<StackValue> symbolList = new List<StackValue>();
for (int n = 0; n < depth; ++n)
{
// TODO Jun: use the proper ID for this
StackValue sv = rmem.Pop();
runtimeVerify(sv.optype == AddressType.Int);
symbolList.Add(sv);
}
symbolList.Reverse();
// TODO Jun: use the proper ID for this
runtimeVerify(AddressType.Int == symbolList[0].optype);
int symindex = (int)symbolList[0].opdata;
if (ProtoCore.DSASM.Constants.kInvalidIndex != symindex)
{
ProtoCore.DSASM.SymbolNode symnode = null;
if (ProtoCore.DSASM.Constants.kInvalidIndex != classIndex)
{
symnode = core.ClassTable.ClassNodes[classIndex].symbols.symbolList[symindex];
}
else
{
symnode = core.DSExecutable.runtimeSymbols[block].symbolList[symindex];
}
ProtoCore.AssociativeGraph.UpdateNode updateNode = new AssociativeGraph.UpdateNode();
updateNode.symbol = symnode;
updateNode.nodeType = AssociativeGraph.UpdateNodeType.kSymbol;
// Build the first symbol of the modified ref
ProtoCore.AssociativeGraph.UpdateNodeRef modifiedRef = new AssociativeGraph.UpdateNodeRef();
modifiedRef.nodeList.Add(updateNode);
modifiedRef.block = symnode.runtimeTableIndex;
// Update the current type
classIndex = symnode.datatype.UID;
// Build the rest of the list of symbols of the modified ref
for (int n = 1; n < symbolList.Count; ++n)
{
// TODO Jun: This should be a memvarindex address type
runtimeVerify(symbolList[n].optype == AddressType.Int);
symindex = (int)symbolList[n].opdata;
// Get the symbol and append it to the modified ref
updateNode = new AssociativeGraph.UpdateNode();
updateNode.symbol = core.ClassTable.ClassNodes[classIndex].symbols.symbolList[symindex];
updateNode.nodeType = AssociativeGraph.UpdateNodeType.kSymbol;
runtimeVerify(null != updateNode.symbol);
modifiedRef.nodeList.Add(updateNode);
// Update the current type
classIndex = symnode.datatype.UID;
}
// Get the current value of symbol
StackValue svSym;
if (DSASM.Constants.kInvalidIndex != symnode.classScope
&& DSASM.Constants.kInvalidIndex == symnode.functionIndex)
{
svSym = StackValue.BuildMemVarIndex(symnode.symbolTableIndex);
}
else
{
svSym = StackValue.BuildVarIndex(symnode.symbolTableIndex);
}
modifiedRef.symbolData = GetOperandData(block, svSym, instruction.op3);
bool addNewModifiedRef = true;
for (int i = 0; i < istream.xUpdateList.Count; ++i)
{
var udpatedRef = istream.xUpdateList[i];
if (modifiedRef.IsEqual(istream.xUpdateList[i]))
{
istream.xUpdateList[i].symbolData = modifiedRef.symbolData;
addNewModifiedRef = false;
break;
}
}
if (addNewModifiedRef)
{
istream.xUpdateList.Add(modifiedRef);
}
}
++pc;
return;
}
protected override void EmitReturn(int line = ProtoCore.DSASM.Constants.kInvalidIndex, int col = ProtoCore.DSASM.Constants.kInvalidIndex,
int endline = ProtoCore.DSASM.Constants.kInvalidIndex, int endcol = ProtoCore.DSASM.Constants.kInvalidIndex)
{
Instruction instr = new Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.RETURN;
AuditReturnLocation(ref line, ref col, ref endline, ref endcol);
++pc;
instr.debug = GetDebugObject(line, col, endline, endcol, ProtoCore.DSASM.Constants.kInvalidIndex);
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr, line, col);
updatePcDictionary(line, col);
}
//
// instruction depx()
// foreach dependencygraph in exe.instructionstreams
// foreach graphnode in dependencygraph
// foreach updatenode in updatelist
// if graphnode.dependsOn(updatenode.symbol)
// if graphnode.symdata is equal to updatenode.symdata
// graphnode.isdirty = true
// end
// end
// end
// end
// end
// updatelist.clear()
// end
//
private void DEPX_Handler(Instruction instruction)
{
//XLangUpdateDependencyGraph();
//// Clear the propagation list
//istream.xUpdateList.Clear();
runtimeVerify(Language.kAssociative == istream.language);
// The current function and class scope
int ci = DSASM.Constants.kInvalidIndex;
int fi = DSASM.Constants.kGlobalScope;
if (fepRun)
{
ci = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexClass).opdata;
fi = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFunction).opdata;
}
// Set the next graph to be executed
SetupNextExecutableGraph(fi, ci);
return;
}
protected void EmitDependency(int exprUID, int modBlkUID, bool isSSAAssign)
{
SetEntry();
EmitInstrConsole(ProtoCore.DSASM.kw.dep, exprUID.ToString() + "[ExprUID]", isSSAAssign.ToString() + "[SSA]");
Instruction instr = new Instruction();
instr.opCode = ProtoCore.DSASM.OpCode.DEP;
instr.op1 = StackValue.BuildInt(exprUID);
instr.op2 = StackValue.BuildInt(isSSAAssign ? 1 : 0);
instr.op3 = StackValue.BuildInt(modBlkUID);
++pc;
codeBlock.instrStream.instrList.Add(instr);
// TODO: Figure out why using AppendInstruction fails for adding these instructions to ExpressionInterpreter
//AppendInstruction(instr);
if (!core.Options.IsDeltaExecution)
{
EmitJumpDependency();
}
}
protected virtual void CALLR_Handler(Instruction instruction)
{
bool isDynamicCall = false;
Instruction instr = new Instruction();
//a new copy of instruction. this will be modified if it is dynamic call
instr.op1 = instruction.op1;
instr.op2 = instruction.op2;
instr.op3 = instruction.op3;
instr.debug = instruction.debug;
instr.opCode = instruction.opCode;
//core.DebugProps.IsInFunction = true;
if (instr.op1.optype == AddressType.Dynamic)
{
isDynamicCall = true;
bool succeeded = ProcessDynamicFunction(instr);
if (!succeeded)
{
RX = StackValue.Null;
++pc;
return;
}
}
// runtime verification
runtimeVerify(ProtoCore.DSASM.AddressType.FunctionIndex == instr.op1.optype);
int functionIndex = (int)instr.op1.opdata;
runtimeVerify(ProtoCore.DSASM.AddressType.ClassIndex == instr.op2.optype);
int classIndex = (int)instr.op2.opdata;
StackValue valDepth = instr.op3;
runtimeVerify(ProtoCore.DSASM.AddressType.Int == valDepth.optype);
int depth = (int)valDepth.opdata;
// chain up exception registration
int blockId = ProtoCore.DSASM.Constants.kInvalidIndex;
int stackIndex = rmem.Stack.Count - 3;
if (rmem.Stack[stackIndex].optype == AddressType.BlockIndex)
{
blockId = (int)rmem.Stack[stackIndex].opdata;
}
#if ENABLE_EXCEPTION_HANDLING
core.stackActiveExceptionRegistration.Push(core.ExceptionHandlingManager.CurrentActiveRegistration);
core.ExceptionHandlingManager.SwitchContextTo(blockId, functionIndex, classIndex, pc);
#endif
++core.FunctionCallDepth;
bool explicitCall = false;
//
// Comment Jun:
// This solution is implemented to be able to capture Exceptions thrown from the callsite that cannot be handled by the runtime
// It will allow execution to continue in graph mode while nullifying the RX register
// This is a temporary solution until unhandle exceptions in the callsite are addressed
//
// TODO:
// Luke/Jun to fix the error propagation from the callsite
//
if (!core.Options.IsDeltaExecution)
{
RX = Callr(functionIndex, classIndex, depth, ref explicitCall, isDynamicCall, instr.debug != null);
}
else
{
//
// Comment Jun:
// Running in graph mode, nullify the result and continue.
// The only affected downstream operations are the ones connected to the graph associated with this call
try
{
RX = Callr(functionIndex, classIndex, depth, ref explicitCall, isDynamicCall, instr.debug != null);
}
catch (ReplicationCaseNotCurrentlySupported e)
{
core.RuntimeStatus.LogWarning(RuntimeData.WarningID.kReplicationWarning, e.Message);
RX = StackValue.Null;
}
}
--core.FunctionCallDepth;
if (!explicitCall)
{
#if ENABLE_EXCEPTION_HANDLING
core.ExceptionHandlingManager.CurrentActiveRegistration = core.stackActiveExceptionRegistration.Pop();
if (core.ExceptionHandlingManager.IsStackUnwinding)
{
int newpc = ProtoCore.DSASM.Constants.kInvalidIndex;
if (core.ExceptionHandlingManager.CanHandleIt(ref newpc))
{
LX = RX;
pc = newpc;
core.ExceptionHandlingManager.SetHandled();
}
else
{
// Clean up stack
isGlobScope = true;
runtimeVerify(rmem.ValidateStackFrame());
pc = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexReturnAddress).opdata;
ReturnSiteGC(blockId, classIndex, functionIndex);
rmem.FramePointer = (int)rmem.GetAtRelative(ProtoCore.DSASM.StackFrame.kFrameIndexFramePointer).opdata;
int localCount, paramCount;
GetLocalAndParamCount(blockId, classIndex, functionIndex, out localCount, out paramCount);
rmem.PopFrame(ProtoCore.DSASM.StackFrame.kStackFrameSize + localCount + paramCount);
if (fepRunStack.Count > 0)
{
terminate = fepRunStack.Pop();
}
else if (fepRun)
{
terminate = true;
}
}
}
else
{
++pc; setPC(pc);
}
#else
++pc;
#endif
}
return;
}