/// <summary>
/// Generates a support profile using an intelligent algorithm for the specified customer.
/// </summary>
/// <param name="position"></param>
/// <param name="pressureMeasurementSupine">Expects 12 measurement values between 0 and 100 millibar as measured with the test person laying on the back.</param>
/// <param name="pressureMeasurementLateral">Expects 12 measurement values between 0 and 100 millibar as measured with the test person laying on the side.</param>
/// <param name="gender"></param>
/// <param name="personHeightCm">The height of the test person in centimeters.</param>
/// <param name="personWeightKg">The weight of the test person in kilogram.</param>
/// <param name="neutralProfileLetter">The letter representing the neutral (middle) stamp firmness on which the profile is based. For example, Vitario uses 'S' and Ergomometer NL uses 'D' as neutral stamp.</param>
/// <param name="result">Holds the resulting profile that was generated through this algorithm. NULL if something went wrong.</param>
/// <returns>Null if everything went fine or an exception.</returns>
public static Exception GenerateProfileBasedOnPressureMapping(MeasurementPositions position, int[] pressureMeasurementSupine, int[] pressureMeasurementLateral, Genders gender, int personHeightCm, int personWeightKg, char neutralProfileLetter, out StampProfileGenerationResult result)
{
try
{
result = default(StampProfileGenerationResult);
if (position == MeasurementPositions.Lateral)
{
int shoulderIndex, lordosisIndex, pelvisIndex = pressureMeasurementSupine.Length - 1;
//generate the standard profile
string profile = string.Join("", Enumerable.Repeat(neutralProfileLetter, 12));
bool personLyingPositionWrong = false;
#region Shoulder
/*Shoulder area is always stamps 1-4. If the measurement in supine position is bad (equal values), the measurement in lateral position is used. */
int[] shoulderAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementSupine : pressureMeasurementLateral;
shoulderIndex = GenerationUtils.GetIndexOfMaximum(shoulderAreaArray, 0, 3);
if (GenerationUtils.IsLeftSideEqual(shoulderIndex, shoulderAreaArray) || shoulderIndex < 3 && GenerationUtils.IsRightSideEqual(shoulderIndex, shoulderAreaArray)) //if one of the values around the shoulder index is the same
{
shoulderAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementLateral : pressureMeasurementSupine;
shoulderIndex = GenerationUtils.GetIndexOfMaximum(shoulderAreaArray, 0, 3);
}
if (!GenerationUtils.IsLeftSideEqual(shoulderIndex, shoulderAreaArray) && shoulderIndex < 3 && GenerationUtils.IsRightSideEqual(shoulderIndex, shoulderAreaArray)) //if the value to the right is the same, move the shoulder index one to the right (e.g. 17 19 19 15)
{
shoulderIndex++;
}
else if (shoulderIndex == 0 && GenerationUtils.IsRightSideEqual(shoulderIndex, shoulderAreaArray) && shoulderAreaArray[2] == shoulderAreaArray[0]) //e.g. 17 17 17 19
{
shoulderIndex = 1;
}
//now generate the profile for this area
if (shoulderIndex == 0)
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(1, 'K');
profile = profile.ReplaceAtIndex(2, 'K');
if (GenerationUtils.IsInRange(shoulderAreaArray[0], shoulderAreaArray[1], 2)) //if the first 2 values are similar, the profile changes a bit
{
profile = profile.ReplaceAtIndex(1, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
}
}
else if (shoulderIndex == 1)
{
profile = profile.ReplaceAtIndex(0, 'K');
profile = profile.ReplaceAtIndex(1, 'T');
profile = profile.ReplaceAtIndex(2, 'K');
//if the values around the shoulder index are similar, the profile changes a bit
if (GenerationUtils.IsInRange(shoulderAreaArray[0], shoulderAreaArray[1], 2))
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
}
if (GenerationUtils.IsInRange(shoulderAreaArray[1], shoulderAreaArray[2], 2))
{
profile = profile.ReplaceAtIndex(2, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
}
}
else if (shoulderIndex == 2 || shoulderIndex == 3) //indices at position 2 and 3 are treated the same, but an index at 3 hints that the person is not properly positioned on the mattress
{
profile = profile.ReplaceAtIndex(0, 'K');
profile = profile.ReplaceAtIndex(1, 'K');
profile = profile.ReplaceAtIndex(2, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
if (shoulderAreaArray[1] + 2 >= shoulderAreaArray[2]) //if the value before the shoulder index is no more less than 2, the profile changes
{
if (gender == Genders.Female)
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(1, 'T');
}
else
{
profile = profile.ReplaceAtIndex(0, 'W');
profile = profile.ReplaceAtIndex(1, 'T');
}
}
if (shoulderIndex == 3)
{
personLyingPositionWrong = true;
}
}
#endregion
#region Pelvis area
/*Pelvis area is always the peak value from right to left in a specific area. */
int[] pelvisAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementSupine : pressureMeasurementLateral;
if (personHeightCm >= 170)
{
//get the pelvis index (peak value from bottom to top, taking 6 values into account)
for (int i = pelvisAreaArray.Length - 1; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
if (personHeightCm >= 160)
{
//get the pelvis index (peak value from bottom to top, taking 4 values into account)
for (int i = pelvisAreaArray.Length - 3; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
else if (personHeightCm >= 150)
{
//get the pelvis index (peak value from bottom-3 to top, taking 3 values into account)
for (int i = pelvisAreaArray.Length - 4; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
else //small persons < 150cm
{
//get the pelvis index (peak value from bottom-3 to top, taking 4 values into account)
for (int i = pelvisAreaArray.Length - 4; i >= 5; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
if (pelvisIndex == 11 && personHeightCm < 190) //pelvis area cannot be at the last stamp for person smaller than 190cm
{
pelvisIndex = 10;
}
//modify profile
profile = profile.ReplaceAtIndex(pelvisIndex, 'K');
if (gender == Genders.Male) //males have a smaller pelvis area --> smaller range of values (+/- 3) and allow only 2 "K"-stamps
{
if (GenerationUtils.IsInRange(pelvisAreaArray[pelvisIndex], pelvisAreaArray[pelvisIndex - 1], 3)) //if the value before the pelvis index is within 3mB, change its corresponding profile stamp
{
profile = profile.ReplaceAtIndex(pelvisIndex - 1, 'K');
}
}
else //females have a bigger pelvis area --> higher range of values (+/- 5)
{
if (pelvisIndex < 11 && GenerationUtils.IsInRange(pelvisAreaArray[pelvisIndex], pelvisAreaArray[pelvisIndex + 1], 5)) //if the value after the pelvis index is within 4mB, change its corresponding profile stamp
{
profile = profile.ReplaceAtIndex(pelvisIndex + 1, 'K');
}
if (GenerationUtils.IsInRange(pelvisAreaArray[pelvisIndex], pelvisAreaArray[pelvisIndex - 1], 5)) //if the value before the pelvis index is within 5mB, change its corresponding profile stamp
{
profile = profile.ReplaceAtIndex(pelvisIndex - 1, 'K');
}
}
#endregion
#region Lordosis area
/* Lordosis area is between shoulder and pelvis area and can never be before stamp 5. The lordosis index is always the index of the lowest value between shoulder and pelvis. */
//calculate the BMI of the test person (determines which stamp is used in the lordosis area)
double heightM = personHeightCm / 100d;
double bmi = personWeightKg / (heightM * heightM); //body mass index
int[] lordosisAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementSupine : pressureMeasurementLateral;
lordosisIndex = GenerationUtils.GetIndexOfMinimum(lordosisAreaArray, 4, pelvisIndex - 1);
if (bmi > 30) //special rule: if the person is overweight, the lordosis index should be calculated based on the supine measurement
{
int lordosisIdxSupine = GenerationUtils.GetIndexOfMinimum(pressureMeasurementSupine, 4, pelvisIndex - 1);
int lordosisIdxLateral = GenerationUtils.GetIndexOfMinimum(pressureMeasurementLateral, 4, pelvisIndex - 1);
if (lordosisIdxSupine > lordosisIdxLateral)
{
lordosisIndex = lordosisIdxSupine;
}
}
//this step is useless because we always use the lateral values here
if (lordosisAreaArray[lordosisIndex - 1] == lordosisAreaArray[lordosisIndex] && lordosisAreaArray[lordosisIndex + 1] == lordosisAreaArray[lordosisIndex]) //if the values around the lordosis index are equal, try to get a better result by using the lateral measurement
{
lordosisAreaArray = pressureMeasurementLateral;
lordosisIndex = GenerationUtils.GetIndexOfMinimum(lordosisAreaArray, 4, pelvisIndex - 1);
}
if (personHeightCm > 155 && lordosisIndex <= 4 && gender == Genders.Male) //special rule: lordosis area cannot be at stamp 5 or below for small persons
{
lordosisIndex = 5;
}
else if (personHeightCm > 160 && lordosisIndex <= 4 && gender == Genders.Female) //special rule: lordosis area cannot be at stamp 5 or below for small persons
{
lordosisIndex = 5;
}
if (pelvisIndex - lordosisIndex > 3) //special rule: if the distance between pelvis and lordosis is more than 2 stamps, something is wrong --> "move" the lordosis index closer to the pelvis index
{
lordosisIndex = pelvisIndex - 3;
}
if (pelvisIndex - lordosisIndex == 1) //special rule: if lordosis and pelvis indices were determined to be next to each other, they have to be separated by 1 stamp
{
lordosisIndex = lordosisIndex - 1;
}
//modify the profile
if ((gender == Genders.Male && bmi < 20) || (gender == Genders.Female && bmi < 19)) //person appears to be underweight --> neutral ("D" or "S") stamp (so the same stamp as in surrounding area)
{
profile = profile.ReplaceAtIndex(lordosisIndex, neutralProfileLetter);
}
else if (bmi > 30) //person appears to be clearly overweight --> "B" stamp
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'B');
}
else
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'L'); //normal weight --> "L" stamp
}
if (lordosisIndex == pelvisIndex - 1 && profile[lordosisIndex] == 'K') //if the lordosis index is directly before the pelvis index, no 'K'-stamp is allowed in the lordosis area (which can't happen with the current algorithm anyways)
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'L');
}
//special rule: "K" must not come directly after "L"
if (profile.Contains("LK")) //"L" must not immediately followed by "K" (distance between lordosis and pelvis area is at least 1 neutral stamp)
{
profile = profile.Replace("LK", "L" + neutralProfileLetter.ToString());
if (profile.Contains("L" + neutralProfileLetter + neutralProfileLetter)) //e.g. "LDD"
{
profile = profile.Replace("L" + neutralProfileLetter + neutralProfileLetter, "L" + neutralProfileLetter + "K"); //add the replaced "K" at the end of the pelvis area
}
}
//special rule: if the lordosis index is on stamp 5, stamp 4 must be neutral and stamp 3 must not be "T"
if (lordosisIndex == 4)
{
profile = profile.ReplaceAtIndex(3, neutralProfileLetter);
if (profile[2] == 'T')
{
profile = profile.ReplaceAtIndex(2, 'K');
}
}
#endregion
result = new StampProfileGenerationResult()
{
SupportProfile = profile.Select(s => s.ToString()).ToArray(), IsPersonLyingPositionWrong = personLyingPositionWrong
};
return(null);
}
else if (position == MeasurementPositions.Supine)
{
int shoulderIndex, lordosisIndex, pelvisIndex = pressureMeasurementSupine.Length - 1;
//generate the standard profile
string profile = string.Join("", Enumerable.Repeat(neutralProfileLetter, 12));
bool personLyingPositionWrong = false;
#region Shoulder
/*Shoulder area is always stamps 1-3. */
int[] shoulderAreaArray = pressureMeasurementSupine;
shoulderIndex = GenerationUtils.GetIndexOfMaximum(shoulderAreaArray, 0, 2);
//now generate the profile for this area
if (shoulderIndex == 0)
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(1, 'K');
profile = profile.ReplaceAtIndex(2, 'K');
}
else if (shoulderIndex == 1 || shoulderIndex == 2)
{
profile = profile.ReplaceAtIndex(0, 'K');
profile = profile.ReplaceAtIndex(1, 'T');
profile = profile.ReplaceAtIndex(2, 'K');
}
#endregion
#region Pelvis area
/*Pelvis area is always the peak value from right to left in a specific area. */
int[] pelvisAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementSupine : pressureMeasurementLateral;
if (personHeightCm >= 170)
{
//get the pelvis index (peak value from bottom to top, taking 6 values into account)
for (int i = pelvisAreaArray.Length - 1; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
if (personHeightCm >= 160)
{
//get the pelvis index (peak value from bottom to top, taking 4 values into account)
for (int i = pelvisAreaArray.Length - 3; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
else if (personHeightCm >= 150)
{
//get the pelvis index (peak value from bottom-3 to top, taking 3 values into account)
for (int i = pelvisAreaArray.Length - 4; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
else //small persons < 150cm
{
//get the pelvis index (peak value from bottom-3 to top, taking 4 values into account)
for (int i = pelvisAreaArray.Length - 4; i >= 5; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
}
if (pelvisIndex == 11 && personHeightCm < 190) //pelvis area cannot be at the last stamp for person smaller than 190cm
{
pelvisIndex = 10;
}
//modify profile
profile = profile.ReplaceAtIndex(pelvisIndex, 'K');
#endregion
#region Lordosis area
/* Lordosis area is between shoulder and pelvis area and can never be before stamp 5. The lordosis index is always the index of the lowest value between shoulder and pelvis. */
//calculate the BMI of the test person (determines which stamp is used in the lordosis area)
double heightM = personHeightCm / 100d;
double bmi = personWeightKg / (heightM * heightM); //body mass index
int[] lordosisAreaArray = pressureMeasurementSupine;
lordosisIndex = GenerationUtils.GetIndexOfMinimum(lordosisAreaArray, 4, pelvisIndex - 1);
if (personHeightCm > 155 && lordosisIndex <= 4 && gender == Genders.Male) //special rule: lordosis area cannot be at stamp 5 or below for small persons
{
lordosisIndex = 5;
}
else if (personHeightCm > 160 && lordosisIndex <= 4 && gender == Genders.Female) //special rule: lordosis area cannot be at stamp 5 or below for small persons
{
lordosisIndex = 5;
}
if (pelvisIndex - lordosisIndex == 1) //special rule: if lordosis and pelvis indices were determined to be next to each other, they have to be separated by 1 stamp
{
lordosisIndex = lordosisIndex - 1;
}
//modify the profile
if ((gender == Genders.Male && bmi < 20) || (gender == Genders.Female && bmi < 19)) //person appears to be underweight --> neutral ("D" or "S") stamp (so the same stamp as in surrounding area)
{
profile = profile.ReplaceAtIndex(lordosisIndex, neutralProfileLetter);
}
else if (bmi > 30) //person appears to be clearly overweight --> "B" stamp
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'B');
}
else
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'L'); //normal weight --> "L" stamp
}
#endregion
result = new StampProfileGenerationResult()
{
SupportProfile = profile.Select(s => s.ToString()).ToArray(), IsPersonLyingPositionWrong = personLyingPositionWrong
};
return(null);
}
else
{
return(null);
}
}
catch (Exception ex)
{
result = default(StampProfileGenerationResult);
return(ex);
}
}
/// <summary>
/// Generates a support profile using an intelligent algorithm for the specified customer.
/// </summary>
/// <param name="position"></param>
/// <param name="pressureMeasurementSupine">Expects 12 measurement values between 0 and 100 millibar as measured with the test person laying on the back.</param>
/// <param name="pressureMeasurementLateral">Expects 12 measurement values between 0 and 100 millibar as measured with the test person laying on the side.</param>
/// <param name="gender"></param>
/// <param name="personHeightCm">The height of the test person in centimeters.</param>
/// <param name="personWeightKg">The weight of the test person in kilogram.</param>
/// <param name="neutralProfileLetter">The letter representing the neutral (middle) role firmness on which the profile is based. For example, Vitario uses 'S' and Ergomometer NL uses 'D' as neutral element.</param>
/// <param name="result">Holds the resulting profile that was generated through this algorithm. NULL if something went wrong.</param>
/// <returns>Null if everything went fine or an exception.</returns>
public static Exception GenerateProfileBasedOnPressureMapping(MeasurementPositions position, int[] pressureMeasurementSupine, int[] pressureMeasurementLateral, Genders gender, int personHeightCm, int personWeightKg, char neutralProfileLetter, out RoleProfileGenerationResult result)
{
try
{
result = default(RoleProfileGenerationResult);
if (position == MeasurementPositions.Lateral)
{
int shoulderIndex, lordosisIndex, pelvisIndex = pressureMeasurementSupine.Length - 1;
//generate the standard profile
string profile = string.Join("", Enumerable.Repeat(neutralProfileLetter, 12));
bool personLyingPositionWrong = false;
#region Shoulder
/*Shoulder area is always roles 1-4. If the measurement in supine position is bad (equal values), the measurement in lateral position is used. */
int[] shoulderAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementSupine : pressureMeasurementLateral;
shoulderIndex = GenerationUtils.GetIndexOfMaximum(shoulderAreaArray, 0, 3);
if (GenerationUtils.IsLeftSideEqual(shoulderIndex, shoulderAreaArray) || shoulderIndex < 3 && GenerationUtils.IsRightSideEqual(shoulderIndex, shoulderAreaArray)) //if one of the values around the shoulder index is the same
{
shoulderAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementLateral : pressureMeasurementSupine;
shoulderIndex = GenerationUtils.GetIndexOfMaximum(shoulderAreaArray, 0, 3);
}
if (!GenerationUtils.IsLeftSideEqual(shoulderIndex, shoulderAreaArray) && shoulderIndex < 3 && GenerationUtils.IsRightSideEqual(shoulderIndex, shoulderAreaArray)) //if the value to the right is the same, move the shoulder index one to the right (e.g. 17 19 19 15)
{
shoulderIndex++;
}
else if (shoulderIndex == 0 && GenerationUtils.IsRightSideEqual(shoulderIndex, shoulderAreaArray) && shoulderAreaArray[2] == shoulderAreaArray[0]) //e.g. 17 17 17 19
{
shoulderIndex = 1;
}
//now generate the profile for this area
if (shoulderIndex == 0)
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(1, 'K');
profile = profile.ReplaceAtIndex(2, 'K');
if (GenerationUtils.IsInRange(shoulderAreaArray[0], shoulderAreaArray[1], 2)) //if the first 2 values are similar, the profile changes a bit
{
profile = profile.ReplaceAtIndex(1, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
}
}
else if (shoulderIndex == 1)
{
profile = profile.ReplaceAtIndex(0, 'K');
profile = profile.ReplaceAtIndex(1, 'T');
profile = profile.ReplaceAtIndex(2, 'K');
//if the values around the shoulder index are similar, the profile changes a bit
if (GenerationUtils.IsInRange(shoulderAreaArray[0], shoulderAreaArray[1], 2))
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
}
if (GenerationUtils.IsInRange(shoulderAreaArray[1], shoulderAreaArray[2], 2))
{
profile = profile.ReplaceAtIndex(2, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
}
}
else if (shoulderIndex == 2 || shoulderIndex == 3) //indices at position 2 and 3 are treated the same, but an index at 3 hints that the person is not properly positioned on the mattress
{
profile = profile.ReplaceAtIndex(0, 'K');
profile = profile.ReplaceAtIndex(1, 'K');
profile = profile.ReplaceAtIndex(2, 'T');
profile = profile.ReplaceAtIndex(3, 'K');
if (shoulderAreaArray[1] + 2 >= shoulderAreaArray[2]) //if the value before the shoulder index is no more less than 2, the profile changes
{
if (gender == Genders.Female)
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(1, 'T');
}
else
{
profile = profile.ReplaceAtIndex(0, 'W');
profile = profile.ReplaceAtIndex(1, 'T');
}
}
if (shoulderIndex == 3)
{
personLyingPositionWrong = true;
}
}
#endregion
#region Pelvis area
/*Pelvis area is always the peak value from right to left. */
int[] pelvisAreaArray = position == MeasurementPositions.Supine ? pressureMeasurementSupine : pressureMeasurementLateral;
//get the pelvis index (peak value from bottom to top, taking 6 values into account)
for (int i = pelvisAreaArray.Length - 1; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
if (pelvisIndex == 11 && personHeightCm < 190) //pelvis area cannot be at the last role for person smaller than 190cm
{
pelvisIndex = 10;
}
//modify profile
profile = profile.ReplaceAtIndex(pelvisIndex, 'K');
if (gender == Genders.Male) //males have a smaller pelvis area --> smaller range of values (+/- 3) and allow only 2 "K"-roles
{
if (GenerationUtils.IsInRange(pelvisAreaArray[pelvisIndex], pelvisAreaArray[pelvisIndex - 1], 3)) //if the value before the pelvis index is within 4mB, change its corresponding profile role
{
profile = profile.ReplaceAtIndex(pelvisIndex - 1, 'K');
}
}
else //females have a bigger pelvis area --> higher range of values (+/- 5)
{
if (pelvisIndex < 11 && GenerationUtils.IsInRange(pelvisAreaArray[pelvisIndex], pelvisAreaArray[pelvisIndex + 1], 5)) //if the value after the pelvis index is within 4mB, change its corresponding profile role
{
profile = profile.ReplaceAtIndex(pelvisIndex + 1, 'K');
}
if (GenerationUtils.IsInRange(pelvisAreaArray[pelvisIndex], pelvisAreaArray[pelvisIndex - 1], 5)) //if the value before the pelvis index is within 4mB, change its corresponding profile role
{
profile = profile.ReplaceAtIndex(pelvisIndex - 1, 'K');
}
}
#endregion
#region Lordosis area
/* Lordosis area is between shoulder and pelvis area and can never be before role 5. The lordosis index is always the index of the lowest value between shoulder and pelvis. */
//calculate the BMI of the test person (determines which role is used in the lordosis area)
double heightM = personHeightCm / 100d;
double bmi = personWeightKg / (heightM * heightM); //body mass index
int[] lordosisAreaArray = pressureMeasurementSupine;
lordosisIndex = GenerationUtils.GetIndexOfMinimum(lordosisAreaArray, 4, pelvisIndex - 1);
if (personHeightCm > 155 && lordosisIndex <= 4 && gender == Genders.Male) //special rule: lordosis area cannot be at role 5 or below for small persons
{
lordosisIndex = 5;
}
else if (personHeightCm > 160 && lordosisIndex <= 4 && gender == Genders.Female) //special rule: lordosis area cannot be at role 5 or below for small persons
{
lordosisIndex = 5;
}
if (pelvisIndex - lordosisIndex == 1) //special rule: if lordosis and pelvis indices were determined to be next to each other, they have to be separated by 1 role
{
lordosisIndex = lordosisIndex - 1;
}
//modify the profile
if (bmi > 30) //person appears to be clearly overweight --> "B" element
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'B');
}
else
{
profile = profile.ReplaceAtIndex(lordosisIndex, neutralProfileLetter); //normal weight --> neutral element
}
//special rule: "K" must not come directly after "B"
if (profile.Contains("BK")) //"B" must not be immediately followed by "K" (distance between lordosis and pelvis area is at least 1 neutral role)
{
profile = profile.Replace("BK", "B" + neutralProfileLetter).Replace("B" + neutralProfileLetter + neutralProfileLetter, "B" + neutralProfileLetter + "K"); //also add the replaced "K" at the end of the pelvis area
}
#endregion
result = new RoleProfileGenerationResult()
{
SupportProfile = profile.Select(s => s.ToString()).ToArray(), IsPersonLyingPositionWrong = personLyingPositionWrong
};
return(null);
}
else if (position == MeasurementPositions.Supine)
{
int shoulderIndex, lordosisIndex, pelvisIndex = pressureMeasurementSupine.Length - 1;
//generate the standard profile
string profile = string.Join("", Enumerable.Repeat(neutralProfileLetter, 12));
bool personLyingPositionWrong = false;
#region Shoulder
/*Shoulder area is always roles 1-3. Ony stam 1 and 2 can be changed to 'T'. */
int[] shoulderAreaArray = pressureMeasurementSupine;
shoulderIndex = GenerationUtils.GetIndexOfMaximum(shoulderAreaArray, 0, 2);
//now generate the profile for this area
if (shoulderIndex == 0)
{
profile = profile.ReplaceAtIndex(0, 'T');
profile = profile.ReplaceAtIndex(1, 'K');
profile = profile.ReplaceAtIndex(2, 'K');
}
else if (shoulderIndex == 1 || shoulderIndex == 2)
{
profile = profile.ReplaceAtIndex(0, 'K');
profile = profile.ReplaceAtIndex(1, 'T');
profile = profile.ReplaceAtIndex(2, 'K');
}
#endregion
#region Pelvis area
/*Pelvis area is always the peak value from right to left. */
int[] pelvisAreaArray = pressureMeasurementSupine;
//get the pelvis index (peak value from bottom to top, taking 6 values into account)
for (int i = pelvisAreaArray.Length - 1; i >= 6; i--)
{
if (pelvisAreaArray[i] >= pelvisAreaArray[pelvisIndex])
{
pelvisIndex = i;
}
else
{
break;
}
}
if (pelvisIndex == 11 && personHeightCm < 190) //pelvis area cannot be at the last role for person smaller than 190cm
{
pelvisIndex = 10;
}
//modify profile
profile = profile.ReplaceAtIndex(pelvisIndex, 'K');
#endregion
#region Lordosis area
/* Lordosis area is between shoulder and pelvis area and can never be before role 5. The lordosis index is always the index of the lowest value between shoulder and pelvis. */
//calculate the BMI of the test person (determines which role is used in the lordosis area)
double heightM = personHeightCm / 100d;
double bmi = personWeightKg / (heightM * heightM); //body mass index
int[] lordosisAreaArray = pressureMeasurementSupine;
lordosisIndex = GenerationUtils.GetIndexOfMinimum(lordosisAreaArray, 4, pelvisIndex - 1);
if (personHeightCm > 155 && lordosisIndex <= 4 && gender == Genders.Male) //special rule: lordosis area cannot be at role 5 or below for small persons
{
lordosisIndex = 5;
}
else if (personHeightCm > 160 && lordosisIndex <= 4 && gender == Genders.Female) //special rule: lordosis area cannot be at role 5 or below for small persons
{
lordosisIndex = 5;
}
if (pelvisIndex - lordosisIndex == 1) //special rule: if lordosis and pelvis indices were determined to be next to each other, they have to be separated by 1 role
{
lordosisIndex = lordosisIndex - 1;
}
//modify the profile
if (bmi > 30) //person appears to be clearly overweight --> "B" role
{
profile = profile.ReplaceAtIndex(lordosisIndex, 'B');
}
else
{
profile = profile.ReplaceAtIndex(lordosisIndex, neutralProfileLetter); //normal weight --> neutral role
}
//special rule: "K" must not come directly after "B"
if (profile.Contains("BK")) //"B" must not immediately followed by "K" (distance between lordosis and pelvis area is at least 1 neutral role)
{
profile = profile.Replace("BK", "B" + neutralProfileLetter).Replace("B" + neutralProfileLetter + neutralProfileLetter, "B" + neutralProfileLetter + "K"); //also add the replaced "K" at the end of the pelvis area
}
#endregion
result = new RoleProfileGenerationResult()
{
SupportProfile = profile.Select(s => s.ToString()).ToArray(), IsPersonLyingPositionWrong = personLyingPositionWrong
};
return(null);
}
else
{
return(null);
}
}
catch (Exception ex)
{
result = default(RoleProfileGenerationResult);
return(ex);
}
}