Ejemplo n.º 1
0
        public override ECPoint Twice()
        {
            if (this.IsInfinity)
            {
                return(this);
            }

            ECCurve curve = this.Curve;

            SecP521R1FieldElement Y1 = (SecP521R1FieldElement)this.RawYCoord;

            if (Y1.IsZero)
            {
                return(curve.Infinity);
            }

            SecP521R1FieldElement X1 = (SecP521R1FieldElement)this.RawXCoord, Z1 = (SecP521R1FieldElement)this.RawZCoords[0];

            uint[] t1 = Nat.Create(17);
            uint[] t2 = Nat.Create(17);

            uint[] Y1Squared = Nat.Create(17);
            SecP521R1Field.Square(Y1.x, Y1Squared);

            uint[] T = Nat.Create(17);
            SecP521R1Field.Square(Y1Squared, T);

            bool Z1IsOne = Z1.IsOne;

            uint[] Z1Squared = Z1.x;
            if (!Z1IsOne)
            {
                Z1Squared = t2;
                SecP521R1Field.Square(Z1.x, Z1Squared);
            }

            SecP521R1Field.Subtract(X1.x, Z1Squared, t1);

            uint[] M = t2;
            SecP521R1Field.Add(X1.x, Z1Squared, M);
            SecP521R1Field.Multiply(M, t1, M);
            Nat.AddBothTo(17, M, M, M);
            SecP521R1Field.Reduce23(M);

            uint[] S = Y1Squared;
            SecP521R1Field.Multiply(Y1Squared, X1.x, S);
            Nat.ShiftUpBits(17, S, 2, 0);
            SecP521R1Field.Reduce23(S);

            Nat.ShiftUpBits(17, T, 3, 0, t1);
            SecP521R1Field.Reduce23(t1);

            SecP521R1FieldElement X3 = new SecP521R1FieldElement(T);

            SecP521R1Field.Square(M, X3.x);
            SecP521R1Field.Subtract(X3.x, S, X3.x);
            SecP521R1Field.Subtract(X3.x, S, X3.x);

            SecP521R1FieldElement Y3 = new SecP521R1FieldElement(S);

            SecP521R1Field.Subtract(S, X3.x, Y3.x);
            SecP521R1Field.Multiply(Y3.x, M, Y3.x);
            SecP521R1Field.Subtract(Y3.x, t1, Y3.x);

            SecP521R1FieldElement Z3 = new SecP521R1FieldElement(M);

            SecP521R1Field.Twice(Y1.x, Z3.x);
            if (!Z1IsOne)
            {
                SecP521R1Field.Multiply(Z3.x, Z1.x, Z3.x);
            }

            return(new SecP521R1Point(curve, X3, Y3, new ECFieldElement[] { Z3 }, IsCompressed));
        }
Ejemplo n.º 2
0
        public override ECPoint Add(ECPoint b)
        {
            if (this.IsInfinity)
            {
                return(b);
            }
            if (b.IsInfinity)
            {
                return(this);
            }
            if (this == b)
            {
                return(Twice());
            }

            ECCurve curve = this.Curve;

            SecP521R1FieldElement X1 = (SecP521R1FieldElement)this.RawXCoord, Y1 = (SecP521R1FieldElement)this.RawYCoord;
            SecP521R1FieldElement X2 = (SecP521R1FieldElement)b.RawXCoord, Y2 = (SecP521R1FieldElement)b.RawYCoord;

            SecP521R1FieldElement Z1 = (SecP521R1FieldElement)this.RawZCoords[0];
            SecP521R1FieldElement Z2 = (SecP521R1FieldElement)b.RawZCoords[0];

            uint[] t1 = Nat.Create(17);
            uint[] t2 = Nat.Create(17);
            uint[] t3 = Nat.Create(17);
            uint[] t4 = Nat.Create(17);

            bool Z1IsOne = Z1.IsOne;

            uint[] U2, S2;
            if (Z1IsOne)
            {
                U2 = X2.x;
                S2 = Y2.x;
            }
            else
            {
                S2 = t3;
                SecP521R1Field.Square(Z1.x, S2);

                U2 = t2;
                SecP521R1Field.Multiply(S2, X2.x, U2);

                SecP521R1Field.Multiply(S2, Z1.x, S2);
                SecP521R1Field.Multiply(S2, Y2.x, S2);
            }

            bool Z2IsOne = Z2.IsOne;

            uint[] U1, S1;
            if (Z2IsOne)
            {
                U1 = X1.x;
                S1 = Y1.x;
            }
            else
            {
                S1 = t4;
                SecP521R1Field.Square(Z2.x, S1);

                U1 = t1;
                SecP521R1Field.Multiply(S1, X1.x, U1);

                SecP521R1Field.Multiply(S1, Z2.x, S1);
                SecP521R1Field.Multiply(S1, Y1.x, S1);
            }

            uint[] H = Nat.Create(17);
            SecP521R1Field.Subtract(U1, U2, H);

            uint[] R = t2;
            SecP521R1Field.Subtract(S1, S2, R);

            // Check if b == this or b == -this
            if (Nat.IsZero(17, H))
            {
                if (Nat.IsZero(17, R))
                {
                    // this == b, i.e. this must be doubled
                    return(this.Twice());
                }

                // this == -b, i.e. the result is the point at infinity
                return(curve.Infinity);
            }

            uint[] HSquared = t3;
            SecP521R1Field.Square(H, HSquared);

            uint[] G = Nat.Create(17);
            SecP521R1Field.Multiply(HSquared, H, G);

            uint[] V = t3;
            SecP521R1Field.Multiply(HSquared, U1, V);

            SecP521R1Field.Multiply(S1, G, t1);

            SecP521R1FieldElement X3 = new SecP521R1FieldElement(t4);

            SecP521R1Field.Square(R, X3.x);
            SecP521R1Field.Add(X3.x, G, X3.x);
            SecP521R1Field.Subtract(X3.x, V, X3.x);
            SecP521R1Field.Subtract(X3.x, V, X3.x);

            SecP521R1FieldElement Y3 = new SecP521R1FieldElement(G);

            SecP521R1Field.Subtract(V, X3.x, Y3.x);
            SecP521R1Field.Multiply(Y3.x, R, t2);
            SecP521R1Field.Subtract(t2, t1, Y3.x);

            SecP521R1FieldElement Z3 = new SecP521R1FieldElement(H);

            if (!Z1IsOne)
            {
                SecP521R1Field.Multiply(Z3.x, Z1.x, Z3.x);
            }
            if (!Z2IsOne)
            {
                SecP521R1Field.Multiply(Z3.x, Z2.x, Z3.x);
            }

            ECFieldElement[] zs = new ECFieldElement[] { Z3 };

            return(new SecP521R1Point(curve, X3, Y3, zs, IsCompressed));
        }
Ejemplo n.º 3
0
 public override ECFieldElement Add(ECFieldElement b)
 {
     uint[] z = Nat.Create(17);
     SecP521R1Field.Add(x, ((SecP521R1FieldElement)b).x, z);
     return(new SecP521R1FieldElement(z));
 }