//构建特征中Face的角度属性邻接图
public AngleGraph(MyNewDefineFeature Feature1)
{
int FaceNum = Feature1.FaceNumber;
NumOfFace = FaceNum;//记录图中面的个数
//初始化邻接矩阵和顶点数组
adjmatrix = new double[FaceNum, FaceNum];
Tag[] shared_edges;
double FaceAngle;
//将代表邻接矩阵的表全初始化为0
for (int i = 0; i < FaceNum; i++)
{
for (int j = 0; j < FaceNum; j++)
{
if (i == j)
{
adjmatrix[i, j] = 0;
continue;
}
//判断两个面是否相邻
ufmodel.AskSharedEdges(Feature1.MyNewFeature[i].FaceTag, Feature1.MyNewFeature[j].FaceTag, out shared_edges);
if (shared_edges.Length == 0)//不相邻的情况取-1
{
adjmatrix[i, j] = -1.0;
}
else
{
MyFace.AskAngleOfFace(Feature1.MyNewFeature[i].FaceTag, Feature1.MyNewFeature[j].FaceTag, out FaceAngle);
adjmatrix[i, j] = Math.Round(FaceAngle, 2);//四舍五入，保留2位小数
}
}
}
}
//获取模型中的凹边
public static void GetConcaveEdge(out Tag[] Edges)
{
Part workPart = theSession.Parts.Work;
BodyCollection bodis = workPart.Bodies;
Body[] bodys = bodis.ToArray();
Tag [] egde_list;
ufmodel.AskBodyEdges(bodys[0].Tag, out egde_list);
Tag[] face_list;
double Angle;
int i = 0;
Tag[] TemEdges = new Tag[egde_list.Length];
foreach (Tag egde in egde_list)
{
ufmodel.AskEdgeFaces(egde, out face_list);
MyFace.AskAngleOfFace(face_list[0], face_list[1], out Angle);
if (Angle < 180.0)
{
TemEdges[i] = egde;
++i;
}
}
Edges = new Tag[i];
for (int j = 0; j < Edges.Length; ++j)
{
Edges[j] = TemEdges[j];
}
}
//判断一个特征是否为一个盲孔
public static bool IsCounterboreHole(MyNewDefineFeature Feature1)
{
//单独的盲孔,边数为3的盲孔是存在阶梯孔的情况
if (Feature1.FaceNumber == 2 && (Feature1.EdgeNumber >= 2) && Feature1.VertexNumber == 0)
{
//先计算两面之间的夹角
double Angle;
MyFace.AskAngleOfFace(Feature1.MyNewFeature[0].FaceTag, Feature1.MyNewFeature[1].FaceTag, out Angle);
if (Angle != 90.0)
{
return(false);
}
if (Feature1.MyNewFeature[0].NodeFaceType == MyNewFaceType.Cylindrical && Feature1.MyNewFeature[1].NodeFaceType == MyNewFaceType.Planar)
{
//判断盲孔：一个面为凹圆柱面，一个面为平面，且两面的交线为凹边
Tag[] SharedEdges;
Program.theUfmodel.AskSharedEdges(Feature1.MyNewFeature[0].FaceTag, Feature1.MyNewFeature[1].FaceTag, out SharedEdges);
if (MyEdges.IsConcaveEdge(SharedEdges[0]) && (MyFace.IsConcaveFace(Feature1.MyNewFeature[0].FaceTag) == 2))
{
return(true);
}
}
else if (Feature1.MyNewFeature[1].NodeFaceType == MyNewFaceType.Cylindrical && Feature1.MyNewFeature[0].NodeFaceType == MyNewFaceType.Planar)
{
//判断盲孔：一个面为凹圆柱面，一个面为平面，且两面的交线为凹边
Tag[] SharedEdges;
Program.theUfmodel.AskSharedEdges(Feature1.MyNewFeature[0].FaceTag, Feature1.MyNewFeature[1].FaceTag, out SharedEdges);
if (MyEdges.IsConcaveEdge(SharedEdges[0]) && (MyFace.IsConcaveFace(Feature1.MyNewFeature[1].FaceTag) == 2))
{
return(true);
}
}
}
return(false);
}
//判断是否为圆柱凸台
public static bool IsOutterCylinderSurface(MyNewDefineFeature Feature1)
{
if (Feature1.FaceNumber == 1 && Feature1.MyNewFeature[0].NodeFaceType == MyNewFaceType.Cylindrical)
{
int temp = MyFace.IsConcaveFace(Feature1.MyNewFeature[0].FaceTag);
if (temp == 1)//同时需要判断该圆柱面为外圆柱面
{
return(true);
}
}
return(false);
}
//判断是否是一个锥孔
public static bool IsConicalHole(MyNewDefineFeature Feature1)
{
if (Feature1.FaceNumber == 1 && Feature1.MyNewFeature[0].NodeFaceType == MyNewFaceType.Conical)
{
int temp = MyFace.IsConcaveFace(Feature1.MyNewFeature[0].FaceTag);
if (temp == 2)//同时需要判断该圆柱面为内圆柱面
{
return(true);
}
}
return(false);
}
//判断边是否为凹边
public static bool IsConcaveEdge(Tag edge1)
{
Tag[] face_list;
ufmodel.AskEdgeFaces(edge1, out face_list);
bool IsConcave = true;
double Angle;
MyFace.AskAngleOfFace(face_list[0], face_list[1], out Angle);
if (Angle >= 180.0)
{
IsConcave = false;
}
return(IsConcave);
}
public MyNewFace(Tag faceTag)
{
FaceTag = faceTag;
FaceType = getFaceType(faceTag);
if (MyFace.IsConcaveFace(faceTag) == 2)
{
FaceConcaConve = FaceConcavity.Concavity;
}
else if (MyFace.IsConcaveFace(faceTag) == 1)
{
FaceConcaConve = FaceConcavity.Convexity;
}
else if (MyFace.IsConcaveFace(faceTag) == 0)
{
FaceConcaConve = FaceConcavity.Tangent;//这个面应该称为光顺面
}
}
public static EdgeConcavity GetEdgeConca(Tag edge)
{
Tag[] face_list;
Program.theUfmodel.AskEdgeFaces(edge, out face_list);
EdgeConcavity edgeType;
double Angle;
MyFace.AskAngleOfFace(face_list[0], face_list[1], out Angle);
if (Angle == 180.0)
{
edgeType = EdgeConcavity.TangentLiner;//相切
}
else if (Angle > 180.0)
{
edgeType = EdgeConcavity.Convexity;//凸边
}
else
{
edgeType = EdgeConcavity.Concavity;//凹边
}
return(edgeType);
}
//平行平面的标注，1、型腔的标注
public static void ParallelFaceDime(Tag Face1, Tag Face2, Tag BasicFace)
{
Part workPart = theSession.Parts.Work;
NXOpen.Session.UndoMarkId markId3;
markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Create Dimension");
NXOpen.Annotations.DimensionData dimensionData1;
dimensionData1 = workPart.Annotations.NewDimensionData();
NXOpen.Annotations.Associativity associativity1;
associativity1 = workPart.Annotations.NewAssociativity();
Face face1 = MyFace.GetFaceByTag(Face1);
associativity1.FirstObject = face1;
NXObject nullNXObject = null;
associativity1.SecondObject = nullNXObject;
associativity1.ObjectView = workPart.ModelingViews.WorkView;
//得到一个面上的一点
double[] DefPoint1 = { 0.0, 0.0, 0.0 };
MyVertex.GetVertexOfFace(Face1, ref DefPoint1);
Point3d pickPoint1 = new Point3d(DefPoint1[0], DefPoint1[1], DefPoint1[2]);//寻找面face1上的点
associativity1.PickPoint = pickPoint1;
NXOpen.Annotations.Associativity[] associativity2 = new NXOpen.Annotations.Associativity[1];
associativity2[0] = associativity1;
dimensionData1.SetAssociativity(1, associativity2);
associativity1.Dispose();
NXOpen.Annotations.Associativity associativity3;
associativity3 = workPart.Annotations.NewAssociativity();
Face face2 = MyFace.GetFaceByTag(Face2);
associativity3.FirstObject = face2;
associativity3.SecondObject = nullNXObject;
//得到一个面上的一点
double[] DefPoint2 = { 0.0, 0.0, 0.0 };
MyVertex.GetVertexOfFace(Face1, ref DefPoint2);
Point3d pickPoint2 = new Point3d(DefPoint2[0], DefPoint2[1], DefPoint2[2]);//寻找face2上的点
associativity3.PickPoint = pickPoint2;
NXOpen.Annotations.Associativity[] associativity4 = new NXOpen.Annotations.Associativity[1];
associativity4[0] = associativity3;
dimensionData1.SetAssociativity(2, associativity4);
NXOpen.Annotations.PmiData pmiData1;
pmiData1 = workPart.Annotations.NewPmiData();
Xform xform2;
if (BasicFace == Tag.Null)
{
xform2 = dimensionData1.GetInferredPlane(PmiDefaultPlane.ModelView, NXOpen.Annotations.DimensionType.Perpendicular);
}
else
{
xform2 = dimensionData1.GetInferredPlane(AutoSelectPMIPlane(Face1, BasicFace), NXOpen.Annotations.DimensionType.Perpendicular);
}
Point3d origin1 = new Point3d(0.0, 0.0, 0.0);
NXOpen.Annotations.PmiPerpendicularDimension pmiPerpendicularDimension1;
pmiPerpendicularDimension1 = workPart.Dimensions.CreatePmiPerpendicularDimension(dimensionData1, pmiData1, xform2, origin1);
pmiPerpendicularDimension1.IsOriginCentered = true;
int nErrs3;
nErrs3 = theSession.UpdateManager.DoUpdate(markId3);
}
public static void AskTypeOfFeature(List <List <Tag> > Face_of_Feature, out SelfDefFeatureType[] Types)
{
int FaceNum, EdgeNum, VertexNum;
HashSet <Tag> Edge_Feature;
HashSet <Point3d> Vertex_Feature;
Types = new SelfDefFeatureType[Face_of_Feature.Count];
int i = 0;
foreach (List <Tag> Feature in Face_of_Feature)//List中存储的面
{
FaceNum = Feature.Count;
MyEdges.GetEdgeOfFeature(Feature, out Edge_Feature);
EdgeNum = Edge_Feature.Count;
MyVertex.GetVertexOfFeature(Feature, out Vertex_Feature);
VertexNum = Vertex_Feature.Count;
//得到燕尾槽的角度图
AngleGraph Anglegraph = new AngleGraph(Feature);
//盲孔
if (FaceNum == 2)//EdegNum=3时为阶梯孔
{
int type1, type2;
ufmodel.AskFaceType(Feature[0], out type1);
ufmodel.AskFaceType(Feature[1], out type2);
if (type1 == 22 && type2 == 16)//16为柱面，22为平面
{
//判断盲孔：一个面为凹圆柱面，一个面为平面，且两面的交线为凹边
Tag [] SharedEdges;
ufmodel.AskSharedEdges(Feature[0], Feature[1], out SharedEdges);
if (MyEdges.IsConcaveEdge(SharedEdges[0]) && (MyFace.IsConcaveFace(Feature[1]) == 2))
{
Types[i] = SelfDefFeatureType.BlindHole;
//得到盲孔的标注边
//Tag Dimeedge = MyEdges.GetDimeEdgeOfHole(Feature[1], Feature[0]);
//Dimension.HoleDime(Dimeedge);
++i;
}
}
else if (type1 == 16 && type2 == 22)
{
//判断盲孔：一个面为凹圆柱面，一个面为平面，且两面的交线为凹边
Tag[] SharedEdges;
ufmodel.AskSharedEdges(Feature[0], Feature[1], out SharedEdges);
if (MyEdges.IsConcaveEdge(SharedEdges[0]) && (MyFace.IsConcaveFace(Feature[0]) == 2))
{
Types[i] = SelfDefFeatureType.BlindHole;
//得到盲孔的标注边
//Tag Dimeedge = MyEdges.GetDimeEdgeOfHole(Feature[1], Feature[0]);
//Dimension.HoleDime(Dimeedge);
++i;
}
}
else if (type1 == 22 && type2 == 22)
{
if (Anglegraph.adjmatrix[0, 1] == 90)
{
Types[i] = SelfDefFeatureType.RECT_STEP;
++i;
}
}
}
else if (FaceNum == 1)
{
int type1;
ufmodel.AskFaceType(Feature[0], out type1);
if (type1 == 16)
{
//应该要添加一个判断是否为孔的圆柱面
//double[] normal1=MyFace.AskFaceofNormal(Feature[0]);
//if (normal1[0] < 0 || normal1[1] < 0 || normal1[2] < 0)//判断圆柱面的法向量是否小于0，如果小于0即为孔的圆柱面
//{
if (EdgeNum == 4)
{
Types[i] = SelfDefFeatureType.SEMI_CIRCLE_SOLT;
++i;
}
else
{
//Tag[] edge_list;
//ufmodel.AskFaceEdges(Feature[0], out edge_list);
//Dimension.HoleDime(edge_list[0]);
Types[i] = SelfDefFeatureType.ThroughHole;
++i;
}
//}
}
}
else if (FaceNum == 5)//型腔
{
if (EdgeNum == 12)
{
if (VertexNum == 12)
{
if (MyFace.AllVerticalplane(Anglegraph))//如果相互垂直，则判定为矩形腔
{
Types[i] = SelfDefFeatureType.ClosePocket;
++i;
Tag BasicFace;
MyFace.AskBasicFace(Feature, out BasicFace);
for (int j = 0; j < FaceNum; ++j)
{
//标注矩形腔的长度和宽度
for (int k = j + 1; k < FaceNum; ++k)
{
if (MyFace.ISFaceParallel(Feature[j], Feature[k]))
{
//Dimension.ParallelFaceDime(Feature[j], Feature[k], BasicFace);
}
}
}
//根据基面来标注矩形槽的深度
Tag OutFace;
MyFace.AskFaceOutFeature(Feature, out OutFace);
Dimension.ParallelFaceDime(OutFace, BasicFace, Tag.Null);
}
}
else if (VertexNum == 8)
{
bool IsRectSlot = true;
for (int index1 = 0; index1 < FaceNum; ++index1)
{
for (int index2 = index1 + 1; index2 < FaceNum; ++index2)
{
double tmp = Anglegraph.adjmatrix[index1, index2];
if (tmp != -1) //相邻,其实还要判断夹角是否相等
{
if (tmp != 90.0 && tmp != 180.0)
{
IsRectSlot = false;
}
}
}
}
if (IsRectSlot)
{
Types[i] = SelfDefFeatureType.RECT_SOLT;
i++;
}
}
}
}
else if (FaceNum == 3)
{
if (EdgeNum == 10)
{
if (VertexNum == 8)
{
bool IsDoveTatilSolt = true;
bool IsRectSolt = true;
for (int index1 = 0; index1 < FaceNum; index1++)
{
for (int index2 = index1 + 1; index2 < FaceNum; ++index2)
{
double tmp = Anglegraph.adjmatrix[index1, index2];
if (tmp != -1)//相邻,其实还要判断夹角是否相等
{
if (tmp >= 90.0 || tmp == 0.0)
{
IsDoveTatilSolt = false;
}
if (tmp != 90.0)
{
IsRectSolt = false;
}
}
}
}
if (IsDoveTatilSolt)
{
Types[i] = SelfDefFeatureType.DOVE_TAIL_SOLT;
++i;
}
if (IsRectSolt)//通的矩形槽
{
Types[i] = SelfDefFeatureType.RECT_THROUGH_SOLT;
++i;
}
}
}
else if (EdgeNum == 4)
{
if (VertexNum == 0)
{
bool IsCutterSlot = true;
for (int index1 = 0; index1 < FaceNum; ++index1)
{
for (int index2 = index1 + 1; index2 < FaceNum; ++index2)
{
double tmp = Anglegraph.adjmatrix[index1, index2];
if (tmp != -1)//相邻,其实还要判断夹角是否相等
{
if (tmp != 90.0 && tmp != 180.0)
{
IsCutterSlot = false;
}
}
}
}
if (IsCutterSlot)
{
Types[i] = SelfDefFeatureType.Cutter_Slot;//退刀槽
i++;
}
}
}
}
}
}
//构建Face的矩阵邻接图属性邻接图
public FeatureGraphic()
{
FaceNodeList = new List <GripchFaceNode>();
DeCompseBaseFaceList = new List <Tag>();
Face[] BodyFace = MyFace.GetFaceOfBody();
NumOfFace = BodyFace.Length;
//构建AAG图中的面链表
for (int i = 0; i < BodyFace.Length; i++)
{
GripchFaceNode faceNode = new GripchFaceNode();
faceNode.AreaOfFace = 0;//的面的表面积
if (MyFace.IsConcaveFace(BodyFace[i].Tag) == 2)
{
faceNode.FaceConcaConve = FaceConcavity.Concavity;//面的凸凹性
}
else if (MyFace.IsConcaveFace(BodyFace[i].Tag) == 1)
{
faceNode.FaceConcaConve = FaceConcavity.Convexity;
}
else
{
faceNode.FaceConcaConve = FaceConcavity.Tangent;//光顺面
}
int loopNum = 0, InnerloopNum = 0;
GetLoopsNumber(BodyFace[i].Tag, ref loopNum, ref InnerloopNum);
faceNode.FaceInnerLoopNumber = InnerloopNum; //面中内环的数目
faceNode.FaceLoopNumber = loopNum; //面中环的数目
faceNode.FaceTag = BodyFace[i].Tag;
faceNode.NodeFaceType = MyNewFace.getFaceType(BodyFace[i]);
faceNode.IsDeCompseBaseFace = faceNode.IsBaseFace();
if (faceNode.IsDeCompseBaseFace)
{
DeCompseBaseFaceList.Add(BodyFace[i].Tag);
}
faceNode.IsConCavityFace = faceNode.IsConCavityFacebyEdge();
faceNode.FaceInnerLoopEdges = faceNode.GetFaceInnerListEdges();
//faceNode.IsConCavityFace = IsConCavityFacebyEdge(faceNode.FaceTag);
int type = 0; //面的类型
double[] point = { 0.0, 0.0, 0.0 }; //圆柱面、圆锥面轴线上的一点
double[] dir = { 0.0, 0.0, 0.0 }; //轴线方向
double[] box = { 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 }; //面的包容盒
double radius;
double rad_data;
int norm_dir = 0;
Program.theUfmodel.AskFaceData(BodyFace[i].Tag, out type, point, dir, box, out radius, out rad_data, out norm_dir);
if (faceNode.NodeFaceType == MyNewFaceType.Cylindrical || faceNode.NodeFaceType == MyNewFaceType.Conical)
{
//数组还可这样赋值？
faceNode.Face_Axis[0] = Math.Round(dir[0], 2);
faceNode.Face_Axis[1] = Math.Round(dir[1], 2);
faceNode.Face_Axis[2] = Math.Round(dir[2], 2);
faceNode.Face_Axis_Point[0] = Math.Round(point[0], 2);
faceNode.Face_Axis_Point[1] = Math.Round(point[1], 2);
faceNode.Face_Axis_Point[2] = Math.Round(point[2], 2);
}
FaceNodeList.Add(faceNode);
}
//构建二维AAG图中的属性邻接图主要包含边的信息
adjmatrix = new GripchEdgeNode[NumOfFace, NumOfFace];
Tag[] shared_edges;
for (int i = 0; i < BodyFace.Length; ++i)
{
for (int j = 0; j < BodyFace.Length; ++j)
{
if (i == j)
{
adjmatrix[i, j] = null;
continue;
}
//判断两个面是否相邻
Program.theUfmodel.AskSharedEdges(BodyFace[i].Tag, BodyFace[j].Tag, out shared_edges);
if (shared_edges.Length == 0)//不相邻的情况取null
{
adjmatrix[i, j] = adjmatrix[j, i] = null;
}
else
{
GripchEdgeNode EdgeNode = new GripchEdgeNode();
EdgeNode.EdgeConcaConve = MyNewEdge.GetEdgeConca(shared_edges[0]);
EdgeNode.EdgeTag = shared_edges[0];
EdgeNode.NodeEdgeType = MyNewEdge.GetEdgeType(shared_edges[0]);
EdgeNode.LooType = true;//暂定true;
adjmatrix[i, j] = EdgeNode;
}
}
}
InnerLoopEdgeNumber = GetInnerLoopEdgesNumber();
InnerLoopEdgeList = new List <Tag>();
Tag InneerEdge;
/*GetInnerLoopEdge(InneerEdgeArray,InnerLoopEdgeNumber);*/
for (int i = 0; i < InnerLoopEdgeNumber; ++i)
{
InneerEdge = GetInnerIndexEdge(i);
InnerLoopEdgeList.Add(InneerEdge);
}
//初始化用来存储，AAG图中分解的特征
SubFeaturesList = new List <MyNewDefineFeature>();
}
//内环边删除后，根据给定的面List来构建属性邻接图
public FeatureGraphic(List <Tag> FaceList)
{
FaceNodeList = new List <GripchFaceNode>();
DeCompseBaseFaceList = new List <Tag>();
NumOfFace = FaceList.Count;
//构建AAG图中的面链表
for (int i = 0; i < NumOfFace; i++)
{
GripchFaceNode faceNode = new GripchFaceNode();
faceNode.AreaOfFace = 0;//的面的表面积
if (MyFace.IsConcaveFace(FaceList[i]) == 2)
{
faceNode.FaceConcaConve = FaceConcavity.Concavity;//面的凸凹性
}
else if (MyFace.IsConcaveFace(FaceList[i]) == 1)
{
faceNode.FaceConcaConve = FaceConcavity.Convexity;
}
else
{
faceNode.FaceConcaConve = FaceConcavity.Tangent;//光顺面
}
int loopNum = 0, InnerloopNum = 0;
GetLoopsNumber(FaceList[i], ref loopNum, ref InnerloopNum);
faceNode.FaceInnerLoopNumber = 0; //面中内环的数目
faceNode.FaceLoopNumber = loopNum; //面中环的数目
faceNode.FaceTag = FaceList[i];
faceNode.NodeFaceType = MyNewFace.getFaceType(FaceList[i]);
faceNode.IsDeCompseBaseFace = faceNode.IsBaseFace();
if (faceNode.IsDeCompseBaseFace)
{
DeCompseBaseFaceList.Add(FaceList[i]);
}
//面凸凹性的判断，需要根据凹边是否存在
faceNode.IsConCavityFace = faceNode.IsConCavityFacebyEdge();
//faceNode.FaceInnerLoopEdges = faceNode.GetFaceInnerListEdges();//得到面的内环边
int type = 0; //面的类型
double[] point = { 0.0, 0.0, 0.0 }; //圆柱面、圆锥面轴线上的一点
double[] dir = { 0.0, 0.0, 0.0 }; //轴线方向
double[] box = { 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 }; //面的包容盒
double radius;
double rad_data;
int norm_dir = 0;
Program.theUfmodel.AskFaceData(FaceList[i], out type, point, dir, box, out radius, out rad_data, out norm_dir);
if (faceNode.NodeFaceType == MyNewFaceType.Cylindrical || faceNode.NodeFaceType == MyNewFaceType.Cylindrical)
{
//数组还可这样赋值？
faceNode.Face_Axis = dir;
faceNode.Face_Axis_Point = point;
}
FaceNodeList.Add(faceNode);
}
//构建二维AAG图中的属性邻接图主要包含边的信息
adjmatrix = new GripchEdgeNode[NumOfFace, NumOfFace];
Tag[] shared_edges;
for (int i = 0; i < FaceList.Count; ++i)
{
for (int j = 0; j < FaceList.Count; ++j)
{
if (i == j)
{
adjmatrix[i, j] = null;
continue;
}
//判断两个面是否相邻
Program.theUfmodel.AskSharedEdges(FaceList[i], FaceList[j], out shared_edges);
if (shared_edges.Length == 0)//不相邻的情况取null
{
adjmatrix[i, j] = adjmatrix[j, i] = null;
}
else
{
GripchEdgeNode EdgeNode = new GripchEdgeNode();
EdgeNode.EdgeConcaConve = MyNewEdge.GetEdgeConca(shared_edges[0]);
EdgeNode.EdgeTag = shared_edges[0];
EdgeNode.NodeEdgeType = MyNewEdge.GetEdgeType(shared_edges[0]);
EdgeNode.LooType = true;//暂定true;
adjmatrix[i, j] = EdgeNode;
}
}
}
//初始化用来存储，AAG图中分解的特征
SubFeaturesList = new List <MyNewDefineFeature>();
}
//获取子特征的相关面
public static void GetFaceArray(out List <List <Tag> > Face_of_Feature)
{
//获取零件模型中的凹边:
Tag[] Edges;
MyEdges.GetConcaveEdge(out Edges);
Tag [] face_tag;
//List<List<Tag>> temp_Face_list;
Face_of_Feature = new List <List <Tag> >();
bool IsExit;
foreach (Tag edge_tag in Edges)
{
IsExit = false;
ufmodel.AskEdgeFaces(edge_tag, out face_tag);
foreach (List <Tag> list_tag in Face_of_Feature)
{
if (list_tag.Contains(face_tag[0]) && (!list_tag.Contains(face_tag[1])))
{
list_tag.Add(face_tag[1]);
IsExit = true;
}
else if (list_tag.Contains(face_tag[1]) && (!list_tag.Contains(face_tag[0])))
{
list_tag.Add(face_tag[0]);
IsExit = true;
}
}
if (!IsExit)
{
List <Tag> TempList1 = new List <Tag>();
TempList1.Add(face_tag[0]);
TempList1.Add(face_tag[1]);
Face_of_Feature.Add(TempList1);
}
}
List <List <Tag> > Face_of_Temp;
Face_of_Temp = new List <List <Tag> >();
Face_of_Temp = Face_of_Feature;
//判断Face_of_Feature中是否有重合的情况，如果有，就合并该List
for (int i = 0; i < Face_of_Temp.Count; ++i)
{
for (int j = 0; j < Face_of_Feature.Count; ++j)
{
if (Face_of_Temp[i] == Face_of_Feature[j])
{
continue;
}
if (IsContainsAll(Face_of_Temp[i], Face_of_Feature[j]))//如果有包含关系，删除List
{
Face_of_Feature.Remove(Face_of_Feature[j]);
Face_of_Temp = Face_of_Feature;
--j;
}
}
}
Face[] AllFace = GetFaceOfBody();
Tag[] Cylindredge;
bool IsThroughHole;
foreach (Face SinFace in AllFace)
{
IsThroughHole = true;
if (SinFace.SolidFaceType == Face.FaceType.Cylindrical)
{
ufmodel.AskFaceEdges(SinFace.Tag, out Cylindredge);//圆柱面的边
foreach (Tag CyEdge1 in Cylindredge)
{
if (MyEdges.IsConcaveEdge(CyEdge1))
{
IsThroughHole = false;
break;
}
}
if (MyFace.IsConcaveFace(SinFace.Tag) == 2)//如果是内圆柱面;
{
if (IsThroughHole && Cylindredge.Length == 2)
{
List <Tag> TempList2 = new List <Tag>();
TempList2.Add(SinFace.Tag);
Face_of_Feature.Add(TempList2);
//Dimension.HoleDime(Cylindredge[0]);
//theUfobj.SetColor(SinFace.Tag, 106);//红色186
}
else if (Cylindredge.Length == 4)
{
List <Tag> TempList2 = new List <Tag>();
TempList2.Add(SinFace.Tag);
Face_of_Feature.Add(TempList2);
}
}
}
}
}
