public void CalcCoverForRunoff(CanopyData Canopy, SurfaceCoverData SurfaceCover)
{
//private void soilwat2_cover_surface_runoff()
// {
//This does NOT calculate runoff. It calculates an effective cover that is used for runoff.
//In the process event this is called before the soilwat2_runoff.
//*+ Purpose
//* calculate the effective runoff cover
//*+ Assumptions
//* Assumes that if canopy height is negative it is missing.
//*+ Mission Statement
//* Calculate the Effective Runoff surface Cover
double canopyfact; //! canopy factor (0-1)
int crop; //! crop number
double effective_crop_cover; //! effective crop cover (0-1)
double cover_surface_crop; //! efective total cover (0-1)
//! cover cn response from perfect - ML & dms 7-7-95
//! nb. perfect assumed crop canopy was 1/2 effect of mulch
//! This allows the taller canopies to have less effect on runoff
//! and the cover close to ground to have full effect (jngh)
//! weight effectiveness of crop canopies
//! 0 (no effect) to 1 (full effect)
cover_surface_crop = 0.0;
for (crop = 0; crop < Canopy.NumberOfCrops; crop++)
{
if (Canopy.canopy_height[crop] >= 0.0)
{
bool bDidInterpolate;
canopyfact = MathUtilities.LinearInterpReal(Canopy.canopy_height[crop], cons.canopy_fact_height, cons.canopy_fact, out bDidInterpolate);
}
else
{
canopyfact = cons.canopy_fact_default;
}
effective_crop_cover = Canopy.cover_tot[crop] * canopyfact;
cover_surface_crop = add_cover(cover_surface_crop, effective_crop_cover);
}
//! add cover known to affect runoff
//! ie residue with canopy shading residue
cover_surface_runoff = add_cover(cover_surface_crop, SurfaceCover.surfaceom_cover);
}
public void CalcCoverForRunoff(CanopyData Canopy, SurfaceCoverData SurfaceCover)
{
//private void soilwat2_cover_surface_runoff()
// {
//This does NOT calculate runoff. It calculates an effective cover that is used for runoff.
//In the process event this is called before the soilwat2_runoff.
//*+ Purpose
//* calculate the effective runoff cover
//*+ Assumptions
//* Assumes that if canopy height is negative it is missing.
//*+ Mission Statement
//* Calculate the Effective Runoff surface Cover
double canopyfact; //! canopy factor (0-1)
int crop; //! crop number
double effective_crop_cover; //! effective crop cover (0-1)
double cover_surface_crop; //! efective total cover (0-1)
//! cover cn response from perfect - ML & dms 7-7-95
//! nb. perfect assumed crop canopy was 1/2 effect of mulch
//! This allows the taller canopies to have less effect on runoff
//! and the cover close to ground to have full effect (jngh)
//! weight effectiveness of crop canopies
//! 0 (no effect) to 1 (full effect)
cover_surface_crop = 0.0;
for (crop = 0; crop < Canopy.NumberOfCrops; crop++)
{
if (Canopy.canopy_height[crop] >= 0.0)
{
bool bDidInterpolate;
canopyfact = MathUtilities.LinearInterpReal(Canopy.canopy_height[crop], cons.canopy_fact_height, cons.canopy_fact, out bDidInterpolate);
}
else
{
canopyfact = cons.canopy_fact_default;
}
effective_crop_cover = Canopy.cover_tot[crop] * canopyfact;
cover_surface_crop = add_cover(cover_surface_crop, effective_crop_cover);
}
//! add cover known to affect runoff
//! ie residue with canopy shading residue
cover_surface_runoff = add_cover(cover_surface_crop, SurfaceCover.surfaceom_cover);
}
private void OnSimulationCommencing(object sender, EventArgs e)
{
SaveModuleConstants();
//daily inputs
met = new MetData();
irrig = new IrrigData();
canopy = new CanopyData();
surfaceCover = new SurfaceCoverData();
//optional daily inputs
runon = 0.0;
interception = 0.0;
residueinterception = 0.0;
if (Soil.Thickness != null)
{
try
{
SoilObject = new SoilWaterSoil(constants, Soil); //constructor can throw an Exception
surfaceFactory = new SurfaceFactory();
surface = surfaceFactory.GetSurface(SoilObject, Clock); //constructor can throw an Exception (Evap class constructor too)
//optional inputs (array)
inflow_lat = null;
}
catch (Exception Ex)
{
throw new ApsimXException(this, Ex.Message); //catch any constructor Exceptions and rethrow as an ApsimXException.
}
}
else
{
throw new ApsimXException(this, "SoilWater module has detected that the Soil has no layers.");
}
}
public void CalcEos_EoReducedDueToShading(double Eo, CanopyData Canopy, SurfaceCoverData SurfaceCover)
{
//private void soilwat2_pot_soil_evaporation()
// {
//eos -> ! (output) potential soil evap after modification for crop cover & residue_w
double eos_canopy_fract; //! fraction of potential soil evaporation limited by crop canopy (mm)
double eos_residue_fract; //! fraction of potential soil evaporation limited by crop residue (mm)
//! 1. get potential soil water evaporation
//!---------------------------------------+
//! reduce Eo to that under plant CANOPY <DMS June 95>
//!---------------------------------------+
//! Based on Adams, Arkin & Ritchie (1976) Soil Sci. Soc. Am. J. 40:436-
//! Reduction in potential soil evaporation under a canopy is determined
//! the "% shade" (ie cover) of the crop canopy - this should include th
//! green & dead canopy ie. the total canopy cover (but NOT near/on-grou
//! residues). From fig. 5 & eqn 2. <dms June 95>
//! Default value for c%canopy_eos_coef = 1.7
//! ...minimum reduction (at cover =0.0) is 1.0
//! ...maximum reduction (at cover =1.0) is 0.183.
eos_canopy_fract = Math.Exp(-1 * cons.canopy_eos_coef * Canopy.cover_tot_sum);
// !-----------------------------------------------+
// ! reduce Eo under canopy to that under mulch <DMS June 95>
// !-----------------------------------------------+
// !1a. adjust potential soil evaporation to account for
// ! the effects of surface residue (Adams et al, 1975)
// ! as used in Perfect
// ! BUT taking into account that residue can be a mix of
// ! residues from various crop types <dms june 95>
if (SurfaceCover.surfaceom_cover >= 1.0)
{
//! We test for 100% to avoid log function failure.
//! The algorithm applied here approaches 0 as cover approaches
//! 100% and so we use zero in this case.
eos_residue_fract = 0.0;
}
else
{
//! Calculate coefficient of residue_wt effect on reducing first
//! stage soil evaporation rate
//! estimate 1st stage soil evap reduction power of
//! mixed residues from the area of mixed residues.
//! [DM. Silburn unpublished data, June 95 ]
//! <temporary value - will reproduce Adams et al 75 effect>
//! c%A_to_evap_fact = 0.00022 / 0.0005 = 0.44
eos_residue_fract = Math.Pow((1.0 - SurfaceCover.surfaceom_cover), cons.A_to_evap_fact);
}
//! Reduce potential soil evap under canopy to that under residue (mulch)
Eos = Eo * eos_canopy_fract * eos_residue_fract;
}
public void CalcEos_EoReducedDueToShading(CanopyData Canopy, SurfaceCoverData SurfaceCover)
{
//private void soilwat2_pot_soil_evaporation()
// {
//eos -> ! (output) potential soil evap after modification for crop cover & residue_w
double eos_canopy_fract; //! fraction of potential soil evaporation limited by crop canopy (mm)
double eos_residue_fract; //! fraction of potential soil evaporation limited by crop residue (mm)
//! 1. get potential soil water evaporation
//!---------------------------------------+
//! reduce Eo to that under plant CANOPY <DMS June 95>
//!---------------------------------------+
//! Based on Adams, Arkin & Ritchie (1976) Soil Sci. Soc. Am. J. 40:436-
//! Reduction in potential soil evaporation under a canopy is determined
//! the "% shade" (ie cover) of the crop canopy - this should include th
//! green & dead canopy ie. the total canopy cover (but NOT near/on-grou
//! residues). From fig. 5 & eqn 2. <dms June 95>
//! Default value for c%canopy_eos_coef = 1.7
//! ...minimum reduction (at cover =0.0) is 1.0
//! ...maximum reduction (at cover =1.0) is 0.183.
eos_canopy_fract = Math.Exp(-1 * cons.canopy_eos_coef * Canopy.cover_tot_sum);
// !-----------------------------------------------+
// ! reduce Eo under canopy to that under mulch <DMS June 95>
// !-----------------------------------------------+
// !1a. adjust potential soil evaporation to account for
// ! the effects of surface residue (Adams et al, 1975)
// ! as used in Perfect
// ! BUT taking into account that residue can be a mix of
// ! residues from various crop types <dms june 95>
if (SurfaceCover.surfaceom_cover >= 1.0)
{
//! We test for 100% to avoid log function failure.
//! The algorithm applied here approaches 0 as cover approaches
//! 100% and so we use zero in this case.
eos_residue_fract = 0.0;
}
else
{
//! Calculate coefficient of residue_wt effect on reducing first
//! stage soil evaporation rate
//! estimate 1st stage soil evap reduction power of
//! mixed residues from the area of mixed residues.
//! [DM. Silburn unpublished data, June 95 ]
//! <temporary value - will reproduce Adams et al 75 effect>
//! c%A_to_evap_fact = 0.00022 / 0.0005 = 0.44
eos_residue_fract = Math.Pow((1.0 - SurfaceCover.surfaceom_cover), cons.A_to_evap_fact);
}
//! Reduce potential soil evap under canopy to that under residue (mulch)
Eos = Eo * eos_canopy_fract * eos_residue_fract;
}
