// Launches a process by means of the debug engine.
// Normally, Visual Studio launches a program using the IDebugPortEx2::LaunchSuspended method and then attaches the debugger
// to the suspended program. However, there are circumstances in which the debug engine may need to launch a program
// (for example, if the debug engine is part of an interpreter and the program being debugged is an interpreted language),
// in which case Visual Studio uses the IDebugEngineLaunch2::LaunchSuspended method
// The IDebugEngineLaunch2::ResumeProcess method is called to start the process after the process has been successfully launched in a suspended state.
int IDebugEngineLaunch2.LaunchSuspended(string pszServer, IDebugPort2 port, string exe, string args, string dir, string env, string options, enum_LAUNCH_FLAGS launchFlags, uint hStdInput, uint hStdOutput, uint hStdError, IDebugEventCallback2 ad7Callback, out IDebugProcess2 process)
{
Debug.Assert(_pollThread == null);
Debug.Assert(_engineCallback == null);
Debug.Assert(_debuggedProcess == null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
// Check if the logger was enabled late.
Logger.LoadMIDebugLogger(_configStore);
process = null;
_engineCallback = new EngineCallback(this, ad7Callback);
Exception exception;
try
{
// Note: LaunchOptions.GetInstance can be an expensive operation and may push a wait message loop
LaunchOptions launchOptions = LaunchOptions.GetInstance(_configStore, exe, args, dir, options, _engineCallback, TargetEngine.Native, Logger);
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread(Logger);
var cancellationTokenSource = new CancellationTokenSource();
using (cancellationTokenSource)
{
_pollThread.RunOperation(ResourceStrings.InitializingDebugger, cancellationTokenSource, (HostWaitLoop waitLoop) =>
{
try
{
_debuggedProcess = new DebuggedProcess(true, launchOptions, _engineCallback, _pollThread, _breakpointManager, this, _configStore);
}
finally
{
// If there is an exception from the DebuggeedProcess constructor, it is our responsibility to dispose the DeviceAppLauncher,
// otherwise the DebuggedProcess object takes ownership.
if (_debuggedProcess == null && launchOptions.DeviceAppLauncher != null)
{
launchOptions.DeviceAppLauncher.Dispose();
}
}
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
return _debuggedProcess.Initialize(waitLoop, cancellationTokenSource.Token);
});
}
EngineUtils.RequireOk(port.GetProcess(_debuggedProcess.Id, out process));
return Constants.S_OK;
}
catch (Exception e) when (ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
exception = e;
// Return from the catch block so that we can let the exception unwind - the stack can get kind of big
}
// If we just return the exception as an HRESULT, we will loose our message, so we instead send up an error event, and then
// return E_ABORT.
Logger.Flush();
SendStartDebuggingError(exception);
Dispose();
return Constants.E_ABORT;
}
private void Dispose()
{
WorkerThread pollThread = _pollThread;
DebuggedProcess debuggedProcess = _debuggedProcess;
_engineCallback = null;
_debuggedProcess = null;
_pollThread = null;
_ad7ProgramId = Guid.Empty;
debuggedProcess?.Close();
pollThread?.Close();
}
public ExceptionManager(MICommandFactory commandFactory, WorkerThread worker, ISampleEngineCallback callback, /*OPTIONAL*/ string registryRoot)
{
Debug.Assert(commandFactory != null, "Missing commandFactory");
Debug.Assert(worker != null, "Missing worker");
Debug.Assert(callback != null, "Missing callback");
_commandFactory = commandFactory;
_worker = worker;
_callback = callback;
_categoryMap = ReadDefaultSettings(registryRoot);
}
// Attach the debug engine to a program.
int IDebugEngine2.Attach(IDebugProgram2[] rgpPrograms, IDebugProgramNode2[] rgpProgramNodes, uint celtPrograms, IDebugEventCallback2 ad7Callback, enum_ATTACH_REASON dwReason)
{
Debug.Assert(_ad7ProgramId == Guid.Empty);
if (celtPrograms != 1)
{
Debug.Fail("SampleEngine only expects to see one program in a process");
throw new ArgumentException();
}
try
{
AD_PROCESS_ID processId = EngineUtils.GetProcessId(rgpPrograms[0]);
EngineUtils.RequireOk(rgpPrograms[0].GetProgramId(out _ad7ProgramId));
// Attach can either be called to attach to a new process, or to complete an attach
// to a launched process
if (_pollThread == null)
{
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread(Logger);
_engineCallback = new EngineCallback(this, ad7Callback);
// Complete the win32 attach on the poll thread
_pollThread.RunOperation(new Operation(delegate
{
throw new NotImplementedException();
}));
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
}
else
{
if (!EngineUtils.ProcIdEquals(processId, _debuggedProcess.Id))
{
Debug.Fail("Asked to attach to a process while we are debugging");
return Constants.E_FAIL;
}
}
AD7EngineCreateEvent.Send(this);
AD7ProgramCreateEvent.Send(this);
this.ProgramCreateEventSent = true;
return Constants.S_OK;
}
catch (MIException e)
{
return e.HResult;
}
catch (Exception e) when (ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
return EngineUtils.UnexpectedException(e);
}
}
public DebuggedProcess(bool bLaunched, LaunchOptions launchOptions, ISampleEngineCallback callback, WorkerThread worker, BreakpointManager bpman, AD7Engine engine, string registryRoot)
{
uint processExitCode = 0;
g_Process = this;
_bStarted = false;
_pendingMessages = new StringBuilder(400);
_worker = worker;
_launchOptions = launchOptions;
_breakpointManager = bpman;
Engine = engine;
_libraryLoaded = new List<string>();
_loadOrder = 0;
MICommandFactory = MICommandFactory.GetInstance(launchOptions.DebuggerMIMode, this);
_waitDialog = MICommandFactory.SupportsStopOnDynamicLibLoad() ? new WaitDialog(ResourceStrings.LoadingSymbolMessage, ResourceStrings.LoadingSymbolCaption) : null;
Natvis = new Natvis.Natvis(this);
// we do NOT have real Win32 process IDs, so we use a guid
AD_PROCESS_ID pid = new AD_PROCESS_ID();
pid.ProcessIdType = (int)enum_AD_PROCESS_ID.AD_PROCESS_ID_GUID;
pid.guidProcessId = Guid.NewGuid();
this.Id = pid;
SourceLineCache = new SourceLineCache(this);
_callback = callback;
_moduleList = new List<DebuggedModule>();
ThreadCache = new ThreadCache(callback, this);
Disassembly = new Disassembly(this);
ExceptionManager = new ExceptionManager(MICommandFactory, _worker, _callback, registryRoot);
VariablesToDelete = new List<string>();
MessageEvent += delegate (object o, string message)
{
// We can get messages before we have started the process
// but we can't send them on until it is
if (_bStarted)
{
_callback.OnOutputString(message);
}
else
{
_pendingMessages.Append(message);
}
};
LibraryLoadEvent += delegate (object o, EventArgs args)
{
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
string file = results.Results.TryFindString("host-name");
if (!string.IsNullOrEmpty(file) && MICommandFactory.SupportsStopOnDynamicLibLoad())
{
_libraryLoaded.Add(file);
if (_waitDialog != null)
{
_waitDialog.ShowWaitDialog(file);
}
}
else if (this.MICommandFactory.Mode == MIMode.Clrdbg)
{
string id = results.Results.FindString("id");
ulong baseAddr = results.Results.FindAddr("base-address");
uint size = results.Results.FindUint("size");
bool symbolsLoaded = results.Results.FindInt("symbols-loaded") != 0;
var module = new DebuggedModule(id, file, baseAddr, size, symbolsLoaded, string.Empty, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
else if (!string.IsNullOrEmpty(file))
{
string addr = results.Results.TryFindString("loaded_addr");
if (string.IsNullOrEmpty(addr) || addr == "-")
{
return; // identifies the exe, not a real load
}
// generate module
string id = results.Results.TryFindString("name");
bool symsLoaded = true;
string symPath = null;
if (results.Results.Contains("symbols-path"))
{
symPath = results.Results.FindString("symbols-path");
if (string.IsNullOrEmpty(symPath))
{
symsLoaded = false;
}
}
else
{
symPath = file;
}
ulong loadAddr = results.Results.FindAddr("loaded_addr");
uint size = results.Results.FindUint("size");
if (String.IsNullOrEmpty(id))
{
id = file;
}
var module = FindModule(id);
if (module == null)
{
module = new DebuggedModule(id, file, loadAddr, size, symsLoaded, symPath, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
}
};
if (_launchOptions is LocalLaunchOptions)
{
this.Init(new MICore.LocalTransport(), _launchOptions);
}
else if (_launchOptions is PipeLaunchOptions)
{
this.Init(new MICore.PipeTransport(), _launchOptions);
}
else if (_launchOptions is TcpLaunchOptions)
{
this.Init(new MICore.TcpTransport(), _launchOptions);
}
else if (_launchOptions is SerialLaunchOptions)
{
string port = ((SerialLaunchOptions)_launchOptions).Port;
this.Init(new MICore.SerialTransport(port), _launchOptions);
}
else
{
throw new ArgumentOutOfRangeException("LaunchInfo.options");
}
MIDebugCommandDispatcher.AddProcess(this);
// When the debuggee exits, we need to exit the debugger
ProcessExitEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (results.Results.Contains("exit-code"))
{
processExitCode = results.Results.FindUint("exit-code");
}
// quit MI Debugger
_worker.PostOperation(CmdExitAsync);
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
};
// When the debugger exits, we tell AD7 we are done
DebuggerExitEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// this is the last AD7 Event we can ever send
// Also the transport is closed when this returns
_callback.OnProcessExit(processExitCode);
Dispose();
};
DebuggerAbortedEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// The MI debugger process unexpectedly exited.
_worker.PostOperation(() =>
{
// If the MI Debugger exits before we get a resume call, we have no way of sending program destroy. So just let start debugging fail.
if (!_connected)
{
return;
}
_callback.OnError(MICoreResources.Error_MIDebuggerExited);
_callback.OnProcessExit(uint.MaxValue);
Dispose();
});
};
ModuleLoadEvent += async delegate (object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
if (_libraryLoaded.Count != 0)
{
string moduleNames = string.Join(", ", _libraryLoaded);
try
{
_libraryLoaded.Clear();
SourceLineCache.OnLibraryLoad();
await _breakpointManager.BindAsync();
await CheckModules();
_bLastModuleLoadFailed = false;
}
catch (Exception e)
{
if (this.ProcessState == MICore.ProcessState.Exited)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_ExceptionProcessingModules, moduleNames, exceptionDescription);
// to avoid spamming the user, if the last module failed, we send the next failure to the output windiw instead of a message box
if (!_bLastModuleLoadFailed)
{
_callback.OnError(message);
_bLastModuleLoadFailed = true;
}
else
{
_callback.OnOutputMessage(message, enum_MESSAGETYPE.MT_OUTPUTSTRING);
}
}
}
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (MICommandFactory.SupportsStopOnDynamicLibLoad())
{
CmdContinueAsync();
}
};
// When we break we need to gather information
BreakModeEvent += async delegate (object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (!this._connected)
{
_initialBreakArgs = results;
return;
}
try
{
await HandleBreakModeEvent(results);
}
catch (Exception e)
{
if (this.ProcessState == MICore.ProcessState.Exited)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_FailedToEnterBreakState, exceptionDescription);
_callback.OnError(message);
Terminate();
}
};
RunModeEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
if (!_bStarted)
{
_bStarted = true;
// Send any strings we got before the process came up
if (_pendingMessages.Length != 0)
{
try
{
_callback.OnOutputString(_pendingMessages.ToString());
}
catch
{
// If something goes wrong sending the output, lets not crash VS
}
}
_pendingMessages = null;
}
};
ErrorEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs result = (ResultEventArgs)args;
_callback.OnError(result.Results.FindString("msg"));
};
ThreadCreatedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadEvent(result.Results.FindInt("id"), /*deleted */false);
};
ThreadExitedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadEvent(result.Results.FindInt("id"), /*deleted*/true);
};
BreakChangeEvent += _breakpointManager.BreakpointModified;
}
public DebuggedProcess(bool bLaunched, LaunchOptions launchOptions, ISampleEngineCallback callback, WorkerThread worker, BreakpointManager bpman, AD7Engine engine, HostConfigurationStore configStore, HostWaitLoop waitLoop = null) : base(launchOptions, engine.Logger)
{
uint processExitCode = 0;
_pendingMessages = new StringBuilder(400);
_worker = worker;
_breakpointManager = bpman;
Engine = engine;
_libraryLoaded = new List<string>();
_loadOrder = 0;
MICommandFactory = MICommandFactory.GetInstance(launchOptions.DebuggerMIMode, this);
_waitDialog = (MICommandFactory.SupportsStopOnDynamicLibLoad() && launchOptions.WaitDynamicLibLoad) ? new HostWaitDialog(ResourceStrings.LoadingSymbolMessage, ResourceStrings.LoadingSymbolCaption) : null;
Natvis = new Natvis.Natvis(this, launchOptions.ShowDisplayString);
// we do NOT have real Win32 process IDs, so we use a guid
AD_PROCESS_ID pid = new AD_PROCESS_ID();
pid.ProcessIdType = (int)enum_AD_PROCESS_ID.AD_PROCESS_ID_GUID;
pid.guidProcessId = Guid.NewGuid();
this.Id = pid;
SourceLineCache = new SourceLineCache(this);
_callback = callback;
_moduleList = new List<DebuggedModule>();
ThreadCache = new ThreadCache(callback, this);
Disassembly = new Disassembly(this);
ExceptionManager = new ExceptionManager(MICommandFactory, _worker, _callback, configStore);
VariablesToDelete = new List<string>();
this.ActiveVariables = new List<IVariableInformation>();
_fileTimestampWarnings = new HashSet<Tuple<string, string>>();
OutputStringEvent += delegate (object o, string message)
{
// We can get messages before we have started the process
// but we can't send them on until it is
if (_connected)
{
_callback.OnOutputString(message);
}
else
{
_pendingMessages.Append(message);
}
};
LibraryLoadEvent += delegate (object o, EventArgs args)
{
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
string file = results.Results.TryFindString("host-name");
if (!string.IsNullOrEmpty(file) && MICommandFactory.SupportsStopOnDynamicLibLoad())
{
_libraryLoaded.Add(file);
if (_waitDialog != null)
{
_waitDialog.ShowWaitDialog(file);
}
}
else if (this.MICommandFactory.Mode == MIMode.Clrdbg)
{
string id = results.Results.FindString("id");
ulong baseAddr = results.Results.FindAddr("base-address");
uint size = results.Results.FindUint("size");
bool symbolsLoaded = results.Results.FindInt("symbols-loaded") != 0;
var module = new DebuggedModule(id, file, baseAddr, size, symbolsLoaded, string.Empty, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
else if (!string.IsNullOrEmpty(file))
{
string addr = results.Results.TryFindString("loaded_addr");
if (string.IsNullOrEmpty(addr) || addr == "-")
{
return; // identifies the exe, not a real load
}
// generate module
string id = results.Results.TryFindString("name");
bool symsLoaded = true;
string symPath = null;
if (results.Results.Contains("symbols-path"))
{
symPath = results.Results.FindString("symbols-path");
if (string.IsNullOrEmpty(symPath))
{
symsLoaded = false;
}
}
else
{
symPath = file;
}
ulong loadAddr = results.Results.FindAddr("loaded_addr");
uint size = results.Results.FindUint("size");
if (String.IsNullOrEmpty(id))
{
id = file;
}
var module = FindModule(id);
if (module == null)
{
module = new DebuggedModule(id, file, loadAddr, size, symsLoaded, symPath, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
}
};
if (_launchOptions is LocalLaunchOptions)
{
LocalLaunchOptions localLaunchOptions = (LocalLaunchOptions)_launchOptions;
if (!localLaunchOptions.IsValidMiDebuggerPath())
{
throw new Exception(MICoreResources.Error_InvalidMiDebuggerPath);
}
if (PlatformUtilities.IsOSX() &&
localLaunchOptions.DebuggerMIMode != MIMode.Clrdbg &&
localLaunchOptions.DebuggerMIMode != MIMode.Lldb &&
!UnixUtilities.IsBinarySigned(localLaunchOptions.MIDebuggerPath))
{
string message = String.Format(CultureInfo.CurrentCulture, ResourceStrings.Warning_DarwinDebuggerUnsigned, localLaunchOptions.MIDebuggerPath);
_callback.OnOutputMessage(new OutputMessage(
message + Environment.NewLine,
enum_MESSAGETYPE.MT_MESSAGEBOX,
OutputMessage.Severity.Warning));
}
ITransport localTransport = null;
// For local Linux and OS X launch, use the local Unix transport which creates a new terminal and
// uses fifos for debugger (e.g., gdb) communication.
if (this.MICommandFactory.UseExternalConsoleForLocalLaunch(localLaunchOptions) &&
(PlatformUtilities.IsLinux() || (PlatformUtilities.IsOSX() && localLaunchOptions.DebuggerMIMode != MIMode.Lldb)))
{
localTransport = new LocalUnixTerminalTransport();
// Only need to clear terminal for Linux and OS X local launch
_needTerminalReset = (localLaunchOptions.ProcessId == 0 && _launchOptions.DebuggerMIMode == MIMode.Gdb);
}
else
{
localTransport = new LocalTransport();
}
if (localLaunchOptions.ShouldStartServer())
{
this.Init(
new MICore.ClientServerTransport(
localTransport,
new ServerTransport(killOnClose: true, filterStdout: localLaunchOptions.FilterStdout, filterStderr: localLaunchOptions.FilterStderr)
),
_launchOptions);
}
else
{
this.Init(localTransport, _launchOptions);
}
// Only need to know the debugger pid on Linux and OS X local launch to detect whether
// the debugger is closed. If the debugger is not running anymore, the response (^exit)
// to the -gdb-exit command is faked to allow MIEngine to shut down.
SetDebuggerPid(localTransport.DebuggerPid);
}
else if (_launchOptions is PipeLaunchOptions)
{
this.Init(new MICore.PipeTransport(), _launchOptions);
}
else if (_launchOptions is TcpLaunchOptions)
{
this.Init(new MICore.TcpTransport(), _launchOptions);
}
else if (_launchOptions is UnixShellPortLaunchOptions)
{
this.Init(new MICore.UnixShellPortTransport(), _launchOptions, waitLoop);
}
else
{
throw new ArgumentOutOfRangeException("LaunchInfo.options");
}
MIDebugCommandDispatcher.AddProcess(this);
// When the debuggee exits, we need to exit the debugger
ProcessExitEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (results.Results.Contains("exit-code"))
{
// GDB sometimes returns exit codes, which don't fit into uint, like "030000000472".
// And we can't throw from here, because it crashes VS.
// Full exit code will still usually be reported in the Output window,
// but here let's return "uint.MaxValue" just to indicate that something went wrong.
if (!uint.TryParse(results.Results.FindString("exit-code"), out processExitCode))
{
processExitCode = uint.MaxValue;
}
}
// quit MI Debugger
if (!this.IsClosed)
{
_worker.PostOperation(CmdExitAsync);
}
else
{
// If we are already closed, make sure that something sends program destroy
_callback.OnProcessExit(processExitCode);
}
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
};
// When the debugger exits, we tell AD7 we are done
DebuggerExitEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// this is the last AD7 Event we can ever send
// Also the transport is closed when this returns
_callback.OnProcessExit(processExitCode);
Dispose();
};
DebuggerAbortedEvent += delegate (object o, DebuggerAbortedEventArgs eventArgs)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// The MI debugger process unexpectedly exited.
_worker.PostOperation(() =>
{
_engineTelemetry.SendDebuggerAborted(MICommandFactory, GetLastSentCommandName(), eventArgs.ExitCode);
// If the MI Debugger exits before we get a resume call, we have no way of sending program destroy. So just let start debugging fail.
if (!_connected)
{
return;
}
_callback.OnError(string.Concat(eventArgs.Message, " ", ResourceStrings.DebuggingWillAbort));
_callback.OnProcessExit(uint.MaxValue);
Dispose();
});
};
ModuleLoadEvent += async delegate (object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
if (_needTerminalReset)
{
_needTerminalReset = false;
// This is to work around a GDB bug of warning "Failed to set controlling terminal: Operation not permitted"
// Reset debuggee terminal after the first module load.
await ResetConsole();
}
if (this.MICommandFactory.SupportsStopOnDynamicLibLoad() && !_launchOptions.WaitDynamicLibLoad)
{
await CmdAsync("-gdb-set stop-on-solib-events 0", ResultClass.None);
}
await this.EnsureModulesLoaded();
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (MICommandFactory.SupportsStopOnDynamicLibLoad())
{
// Do not continue if debugging core dump
if (!this.IsCoreDump)
{
CmdContinueAsync();
}
}
};
// When we break we need to gather information
BreakModeEvent += async delegate (object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
StoppingEventArgs results = args as MICore.Debugger.StoppingEventArgs;
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (!this._connected)
{
_initialBreakArgs = results;
return;
}
try
{
await HandleBreakModeEvent(results, results.AsyncRequest);
}
catch (Exception e) when (ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
if (this.IsStopDebuggingInProgress)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_FailedToEnterBreakState, exceptionDescription);
_callback.OnError(message);
Terminate();
}
};
ErrorEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs result = (ResultEventArgs)args;
_callback.OnError(result.Results.FindString("msg"));
};
ThreadCreatedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadCreatedEvent(result.Results.FindInt("id"), result.Results.TryFindString("group-id"));
_childProcessHandler?.ThreadCreatedEvent(result.Results);
};
ThreadExitedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadExitedEvent(result.Results.FindInt("id"));
};
ThreadGroupExitedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadGroupExitedEvent(result.Results.FindString("id"));
};
MessageEvent += (object o, ResultEventArgs args) =>
{
OutputMessage outputMessage = DecodeOutputEvent(args.Results);
if (outputMessage != null)
{
_callback.OnOutputMessage(outputMessage);
}
};
TelemetryEvent += (object o, ResultEventArgs args) =>
{
string eventName;
KeyValuePair<string, object>[] properties;
if (_engineTelemetry.DecodeTelemetryEvent(args.Results, out eventName, out properties))
{
HostTelemetry.SendEvent(eventName, properties);
}
};
BreakChangeEvent += _breakpointManager.BreakpointModified;
}
// Launches a process by means of the debug engine.
// Normally, Visual Studio launches a program using the IDebugPortEx2::LaunchSuspended method and then attaches the debugger
// to the suspended program. However, there are circumstances in which the debug engine may need to launch a program
// (for example, if the debug engine is part of an interpreter and the program being debugged is an interpreted language),
// in which case Visual Studio uses the IDebugEngineLaunch2::LaunchSuspended method
// The IDebugEngineLaunch2::ResumeProcess method is called to start the process after the process has been successfully launched in a suspended state.
int IDebugEngineLaunch2.LaunchSuspended(string pszServer, IDebugPort2 port, string exe, string args, string dir, string env, string options, enum_LAUNCH_FLAGS launchFlags, uint hStdInput, uint hStdOutput, uint hStdError, IDebugEventCallback2 ad7Callback, out IDebugProcess2 process)
{
Debug.Assert(_pollThread == null);
Debug.Assert(_engineCallback == null);
Debug.Assert(_debuggedProcess == null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
process = null;
_engineCallback = new EngineCallback(this, ad7Callback);
Exception exception;
try
{
// Note: LaunchOptions.GetInstance can be an expensive operation and may push a wait message loop
LaunchOptions launchOptions = LaunchOptions.GetInstance(_registryRoot, exe, args, dir, options, _engineCallback);
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread();
var cancellationTokenSource = new CancellationTokenSource();
using (cancellationTokenSource)
{
_pollThread.RunOperation(ResourceStrings.InitializingDebugger, cancellationTokenSource, (MICore.WaitLoop waitLoop) =>
{
try
{
_debuggedProcess = new DebuggedProcess(true, launchOptions, _engineCallback, _pollThread, _breakpointManager, this);
}
finally
{
// If there is an exception from the DebuggeedProcess constructor, it is our responsibility to dispose the DeviceAppLauncher,
// otherwise the DebuggedProcess object takes ownership.
if (_debuggedProcess == null && launchOptions.DeviceAppLauncher != null)
{
launchOptions.DeviceAppLauncher.Dispose();
}
}
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
return(_debuggedProcess.Initialize(waitLoop, cancellationTokenSource.Token));
});
}
EngineUtils.RequireOk(port.GetProcess(_debuggedProcess.Id, out process));
return(Constants.S_OK);
}
catch (Exception e)
{
exception = e;
// Return from the catch block so that we can let the exception unwind - the stack can get kind of big
}
// If we just return the exception as an HRESULT, we will loose our message, so we instead send up an error event, and then
// return E_ABORT.
Logger.Flush();
SendStartDebuggingError(exception);
Dispose();
return(Constants.E_ABORT);
}
public DebuggedProcess(bool bLaunched, LaunchOptions launchOptions, ISampleEngineCallback callback, WorkerThread worker, BreakpointManager bpman, AD7Engine engine)
{
uint processExitCode = 0;
g_Process = this;
_bStarted = false;
_pendingMessages = new StringBuilder(400);
_worker = worker;
_launchOptions = launchOptions;
_breakpointManager = bpman;
Engine = engine;
_libraryLoaded = new List <string>();
_loadOrder = 0;
MICommandFactory = MICommandFactory.GetInstance(launchOptions.DebuggerMIMode, this);
_waitDialog = MICommandFactory.SupportsStopOnDynamicLibLoad() ? new WaitDialog(ResourceStrings.LoadingSymbolMessage, ResourceStrings.LoadingSymbolCaption) : null;
Natvis = new Natvis.Natvis(this);
// we do NOT have real Win32 process IDs, so we use a guid
AD_PROCESS_ID pid = new AD_PROCESS_ID();
pid.ProcessIdType = (int)enum_AD_PROCESS_ID.AD_PROCESS_ID_GUID;
pid.guidProcessId = Guid.NewGuid();
this.Id = pid;
SourceLineCache = new SourceLineCache(this);
_callback = callback;
_moduleList = new List <DebuggedModule>();
ThreadCache = new ThreadCache(callback, this);
Disassembly = new Disassembly(this);
VariablesToDelete = new List <string>();
MessageEvent += delegate(object o, string message)
{
// We can get messages before we have started the process
// but we can't send them on until it is
if (_bStarted)
{
_callback.OnOutputString(message);
}
else
{
_pendingMessages.Append(message);
}
};
LibraryLoadEvent += delegate(object o, EventArgs args)
{
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
string file = results.Results.TryFindString("host-name");
if (!string.IsNullOrEmpty(file) && MICommandFactory.SupportsStopOnDynamicLibLoad())
{
_libraryLoaded.Add(file);
if (_waitDialog != null)
{
_waitDialog.ShowWaitDialog(file);
}
}
else if (this.MICommandFactory.Mode == MIMode.Clrdbg)
{
string id = results.Results.FindString("id");
ulong baseAddr = results.Results.FindAddr("base-address");
uint size = results.Results.FindUint("size");
bool symbolsLoaded = results.Results.FindInt("symbols-loaded") != 0;
var module = new DebuggedModule(id, file, baseAddr, size, symbolsLoaded, string.Empty, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
else if (!string.IsNullOrEmpty(file))
{
string addr = results.Results.TryFindString("loaded_addr");
if (string.IsNullOrEmpty(addr) || addr == "-")
{
return; // identifies the exe, not a real load
}
// generate module
string id = results.Results.TryFindString("name");
bool symsLoaded = true;
string symPath = null;
if (results.Results.Contains("symbols-path"))
{
symPath = results.Results.FindString("symbols-path");
if (string.IsNullOrEmpty(symPath))
{
symsLoaded = false;
}
}
else
{
symPath = file;
}
ulong loadAddr = results.Results.FindAddr("loaded_addr");
uint size = results.Results.FindUint("size");
if (String.IsNullOrEmpty(id))
{
id = file;
}
var module = FindModule(id);
if (module == null)
{
module = new DebuggedModule(id, file, loadAddr, size, symsLoaded, symPath, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
}
};
if (_launchOptions is LocalLaunchOptions)
{
this.Init(new MICore.LocalTransport(), _launchOptions);
}
else if (_launchOptions is PipeLaunchOptions)
{
this.Init(new MICore.PipeTransport(), _launchOptions);
}
else if (_launchOptions is TcpLaunchOptions)
{
this.Init(new MICore.TcpTransport(), _launchOptions);
}
else if (_launchOptions is SerialLaunchOptions)
{
string port = ((SerialLaunchOptions)_launchOptions).Port;
this.Init(new MICore.SerialTransport(port), _launchOptions);
}
else
{
throw new ArgumentOutOfRangeException("LaunchInfo.options");
}
MIDebugCommandDispatcher.AddProcess(this);
// When the debuggee exits, we need to exit the debugger
ProcessExitEvent += delegate(object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (results.Results.Contains("exit-code"))
{
processExitCode = results.Results.FindUint("exit-code");
}
// quit MI Debugger
_worker.PostOperation(CmdExitAsync);
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
};
// When the debugger exits, we tell AD7 we are done
DebuggerExitEvent += delegate(object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// this is the last AD7 Event we can ever send
// Also the transport is closed when this returns
_callback.OnProcessExit(processExitCode);
Dispose();
};
DebuggerAbortedEvent += delegate(object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// The MI debugger process unexpectedly exited.
_worker.PostOperation(() =>
{
// If the MI Debugger exits before we get a resume call, we have no way of sending program destroy. So just let start debugging fail.
if (!_connected)
{
return;
}
_callback.OnError(MICoreResources.Error_MIDebuggerExited);
_callback.OnProcessExit(uint.MaxValue);
Dispose();
});
};
ModuleLoadEvent += async delegate(object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
if (_libraryLoaded.Count != 0)
{
string moduleNames = string.Join(", ", _libraryLoaded);
try
{
_libraryLoaded.Clear();
SourceLineCache.OnLibraryLoad();
await _breakpointManager.BindAsync();
await CheckModules();
_bLastModuleLoadFailed = false;
}
catch (Exception e)
{
if (this.ProcessState == MICore.ProcessState.Exited)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_ExceptionProcessingModules, moduleNames, exceptionDescription);
// to avoid spamming the user, if the last module failed, we send the next failure to the output windiw instead of a message box
if (!_bLastModuleLoadFailed)
{
_callback.OnError(message);
_bLastModuleLoadFailed = true;
}
else
{
_callback.OnOutputMessage(message, enum_MESSAGETYPE.MT_OUTPUTSTRING);
}
}
}
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (MICommandFactory.SupportsStopOnDynamicLibLoad())
{
CmdContinueAsync();
}
};
// When we break we need to gather information
BreakModeEvent += async delegate(object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (!this._connected)
{
_initialBreakArgs = results;
return;
}
try
{
await HandleBreakModeEvent(results);
}
catch (Exception e)
{
if (this.ProcessState == MICore.ProcessState.Exited)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_FailedToEnterBreakState, exceptionDescription);
_callback.OnError(message);
Terminate();
}
};
RunModeEvent += delegate(object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
if (!_bStarted)
{
_bStarted = true;
// Send any strings we got before the process came up
if (_pendingMessages.Length != 0)
{
try
{
_callback.OnOutputString(_pendingMessages.ToString());
}
catch
{
// If something goes wrong sending the output, lets not crash VS
}
}
_pendingMessages = null;
}
};
ErrorEvent += delegate(object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs result = (ResultEventArgs)args;
_callback.OnError(result.Results.FindString("msg"));
};
ThreadCreatedEvent += delegate(object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadEvent(result.Results.FindInt("id"), /*deleted */ false);
};
ThreadExitedEvent += delegate(object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadEvent(result.Results.FindInt("id"), /*deleted*/ true);
};
BreakChangeEvent += _breakpointManager.BreakpointModified;
}
public DebuggedProcess(bool bLaunched, LaunchOptions launchOptions, ISampleEngineCallback callback, WorkerThread worker, BreakpointManager bpman, AD7Engine engine, HostConfigurationStore configStore) : base(launchOptions)
{
uint processExitCode = 0;
_pendingMessages = new StringBuilder(400);
_worker = worker;
_breakpointManager = bpman;
Engine = engine;
_libraryLoaded = new List<string>();
_loadOrder = 0;
MICommandFactory = MICommandFactory.GetInstance(launchOptions.DebuggerMIMode, this);
_waitDialog = MICommandFactory.SupportsStopOnDynamicLibLoad() ? new HostWaitDialog(ResourceStrings.LoadingSymbolMessage, ResourceStrings.LoadingSymbolCaption) : null;
Natvis = new Natvis.Natvis(this, launchOptions.ShowDisplayString);
// we do NOT have real Win32 process IDs, so we use a guid
AD_PROCESS_ID pid = new AD_PROCESS_ID();
pid.ProcessIdType = (int)enum_AD_PROCESS_ID.AD_PROCESS_ID_GUID;
pid.guidProcessId = Guid.NewGuid();
this.Id = pid;
SourceLineCache = new SourceLineCache(this);
_callback = callback;
_moduleList = new List<DebuggedModule>();
ThreadCache = new ThreadCache(callback, this);
Disassembly = new Disassembly(this);
ExceptionManager = new ExceptionManager(MICommandFactory, _worker, _callback, configStore);
VariablesToDelete = new List<string>();
OutputStringEvent += delegate (object o, string message)
{
// We can get messages before we have started the process
// but we can't send them on until it is
if (_connected)
{
_callback.OnOutputString(message);
}
else
{
_pendingMessages.Append(message);
}
};
LibraryLoadEvent += delegate (object o, EventArgs args)
{
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
string file = results.Results.TryFindString("host-name");
if (!string.IsNullOrEmpty(file) && MICommandFactory.SupportsStopOnDynamicLibLoad())
{
_libraryLoaded.Add(file);
if (_waitDialog != null)
{
_waitDialog.ShowWaitDialog(file);
}
}
else if (this.MICommandFactory.Mode == MIMode.Clrdbg)
{
string id = results.Results.FindString("id");
ulong baseAddr = results.Results.FindAddr("base-address");
uint size = results.Results.FindUint("size");
bool symbolsLoaded = results.Results.FindInt("symbols-loaded") != 0;
var module = new DebuggedModule(id, file, baseAddr, size, symbolsLoaded, string.Empty, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
else if (!string.IsNullOrEmpty(file))
{
string addr = results.Results.TryFindString("loaded_addr");
if (string.IsNullOrEmpty(addr) || addr == "-")
{
return; // identifies the exe, not a real load
}
// generate module
string id = results.Results.TryFindString("name");
bool symsLoaded = true;
string symPath = null;
if (results.Results.Contains("symbols-path"))
{
symPath = results.Results.FindString("symbols-path");
if (string.IsNullOrEmpty(symPath))
{
symsLoaded = false;
}
}
else
{
symPath = file;
}
ulong loadAddr = results.Results.FindAddr("loaded_addr");
uint size = results.Results.FindUint("size");
if (String.IsNullOrEmpty(id))
{
id = file;
}
var module = FindModule(id);
if (module == null)
{
module = new DebuggedModule(id, file, loadAddr, size, symsLoaded, symPath, _loadOrder++);
lock (_moduleList)
{
_moduleList.Add(module);
}
_callback.OnModuleLoad(module);
}
}
};
if (_launchOptions is LocalLaunchOptions)
{
LocalLaunchOptions localLaunchOptions = (LocalLaunchOptions)_launchOptions;
if (RuntimeInformation.IsOSPlatform(OSPlatform.Linux) &&
_launchOptions.DebuggerMIMode == MIMode.Gdb &&
String.IsNullOrEmpty(localLaunchOptions.MIDebuggerServerAddress)
)
{
// For local linux launch, use the local linux transport which creates a new terminal and uses fifos for gdb communication.
// CONSIDER: add new flag and only do this if new terminal is true? Note that setting this to false on linux will cause a deadlock
// during debuggee launch
if (localLaunchOptions.ShouldStartServer())
{
this.Init(new MICore.ClientServerTransport
(
new LocalLinuxTransport(),
new ServerTransport(killOnClose: true, filterStdout: localLaunchOptions.FilterStdout, filterStderr: localLaunchOptions.FilterStderr)
), _launchOptions
);
}
else
{
this.Init(new MICore.LocalLinuxTransport(), _launchOptions);
}
}
else
{
if (localLaunchOptions.ShouldStartServer())
{
this.Init(new MICore.ClientServerTransport
(
new LocalTransport(),
new ServerTransport(killOnClose: true, filterStdout: localLaunchOptions.FilterStdout, filterStderr: localLaunchOptions.FilterStderr)
), _launchOptions
);
}
else
{
this.Init(new MICore.LocalTransport(), _launchOptions);
}
}
}
else if (_launchOptions is PipeLaunchOptions)
{
this.Init(new MICore.PipeTransport(), _launchOptions);
}
else if (_launchOptions is TcpLaunchOptions)
{
this.Init(new MICore.TcpTransport(), _launchOptions);
}
else
{
throw new ArgumentOutOfRangeException("LaunchInfo.options");
}
MIDebugCommandDispatcher.AddProcess(this);
// When the debuggee exits, we need to exit the debugger
ProcessExitEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (results.Results.Contains("exit-code"))
{
// GDB sometimes returns exit codes, which don't fit into uint, like "030000000472".
// And we can't throw from here, because it crashes VS.
// Full exit code will still usually be reported in the Output window,
// but here let's return "uint.MaxValue" just to indicate that something went wrong.
if (!uint.TryParse(results.Results.FindString("exit-code"), out processExitCode))
{
processExitCode = uint.MaxValue;
}
}
// quit MI Debugger
_worker.PostOperation(CmdExitAsync);
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
};
// When the debugger exits, we tell AD7 we are done
DebuggerExitEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// this is the last AD7 Event we can ever send
// Also the transport is closed when this returns
_callback.OnProcessExit(processExitCode);
Dispose();
};
DebuggerAbortedEvent += delegate (object o, /*OPTIONAL*/ string debuggerExitCode)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
// The MI debugger process unexpectedly exited.
_worker.PostOperation(() =>
{
// If the MI Debugger exits before we get a resume call, we have no way of sending program destroy. So just let start debugging fail.
if (!_connected)
{
return;
}
string message;
if (string.IsNullOrEmpty(debuggerExitCode))
message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_MIDebuggerExited_UnknownCode, MICommandFactory.Name);
else
message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_MIDebuggerExited_WithCode, MICommandFactory.Name, debuggerExitCode);
_callback.OnError(message);
_callback.OnProcessExit(uint.MaxValue);
Dispose();
});
};
ModuleLoadEvent += async delegate (object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
if (_libraryLoaded.Count != 0)
{
string moduleNames = string.Join(", ", _libraryLoaded);
try
{
_libraryLoaded.Clear();
SourceLineCache.OnLibraryLoad();
await _breakpointManager.BindAsync();
await CheckModules();
_bLastModuleLoadFailed = false;
}
catch (Exception e)
{
if (this.ProcessState == MICore.ProcessState.Exited)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_ExceptionProcessingModules, moduleNames, exceptionDescription);
// to avoid spamming the user, if the last module failed, we send the next failure to the output windiw instead of a message box
if (!_bLastModuleLoadFailed)
{
_callback.OnError(message);
_bLastModuleLoadFailed = true;
}
else
{
_callback.OnOutputMessage(new OutputMessage(message, enum_MESSAGETYPE.MT_OUTPUTSTRING, OutputMessage.Severity.Warning));
}
}
}
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (MICommandFactory.SupportsStopOnDynamicLibLoad())
{
CmdContinueAsync();
}
};
// When we break we need to gather information
BreakModeEvent += async delegate (object o, EventArgs args)
{
// NOTE: This is an async void method, so make sure exceptions are caught and somehow reported
ResultEventArgs results = args as MICore.Debugger.ResultEventArgs;
if (_waitDialog != null)
{
_waitDialog.EndWaitDialog();
}
if (!this._connected)
{
_initialBreakArgs = results;
return;
}
try
{
await HandleBreakModeEvent(results);
}
catch (Exception e)
{
if (this.ProcessState == MICore.ProcessState.Exited)
{
return; // ignore exceptions after the process has exited
}
string exceptionDescription = EngineUtils.GetExceptionDescription(e);
string message = string.Format(CultureInfo.CurrentCulture, MICoreResources.Error_FailedToEnterBreakState, exceptionDescription);
_callback.OnError(message);
Terminate();
}
};
ErrorEvent += delegate (object o, EventArgs args)
{
// NOTE: Exceptions leaked from this method may cause VS to crash, be careful
ResultEventArgs result = (ResultEventArgs)args;
_callback.OnError(result.Results.FindString("msg"));
};
ThreadCreatedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadEvent(result.Results.FindInt("id"), /*deleted */false);
};
ThreadExitedEvent += delegate (object o, EventArgs args)
{
ResultEventArgs result = (ResultEventArgs)args;
ThreadCache.ThreadEvent(result.Results.FindInt("id"), /*deleted*/true);
};
MessageEvent += (object o, ResultEventArgs args) =>
{
OutputMessage outputMessage = DecodeOutputEvent(args.Results);
if (outputMessage != null)
{
_callback.OnOutputMessage(outputMessage);
}
};
TelemetryEvent += (object o, ResultEventArgs args) =>
{
string eventName;
KeyValuePair<string, object>[] properties;
if (DecodeTelemetryEvent(args.Results, out eventName, out properties))
{
HostTelemetry.SendEvent(eventName, properties);
}
};
BreakChangeEvent += _breakpointManager.BreakpointModified;
}
public ExceptionManager(MICommandFactory commandFactory, WorkerThread worker, ISampleEngineCallback callback, /*OPTIONAL*/ HostConfigurationStore configStore)
{
Debug.Assert(commandFactory != null, "Missing commandFactory");
Debug.Assert(worker != null, "Missing worker");
Debug.Assert(callback != null, "Missing callback");
_commandFactory = commandFactory;
_worker = worker;
_callback = callback;
_categoryMap = ReadDefaultSettings(configStore);
}
private void Dispose()
{
WorkerThread pollThread = _pollThread;
DebuggedProcess debuggedProcess = _debuggedProcess;
_engineCallback = null;
_debuggedProcess = null;
_pollThread = null;
_ad7ProgramId = Guid.Empty;
if(debuggedProcess != null)
debuggedProcess.Close();
if(pollThread != null)
pollThread.Close();
}
