unsafe void generate_alpha_mask(int cx, int cy)
{
alphaByteArray = new byte[cx * cy];
{
#if USE_CLIPPING_ALPHA_MASK
alphaMaskImageBuffer.AttachBuffer(alphaByteArray, 20 * cx + 20, cx - 40, cy - 40, cx, 8, 1);
#else
alphaMaskImageBuffer.attach(alphaByteArray, (int)cx, (int)cy, cx, 1);
#endif
ImageBuffer image = new ImageBuffer();
image.Attach(alphaMaskImageBuffer, new blender_gray(1), 1, 0, 8);
ImageClippingProxy clippingProxy = new ImageClippingProxy(image);
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
clippingProxy.clear(new RGBA_Floats(0));
VertexSource.Ellipse ellipseForMask = new MatterHackers.Agg.VertexSource.Ellipse();
System.Random randGenerator = new Random(1432);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
int i;
int num = (int)numMasksSlider.Value;
for (i = 0; i < num; i++)
{
if (i == num - 1)
{
ellipseForMask.init(Width / 2, Height / 2, 110, 110, 100);
rasterizer.add_path(ellipseForMask);
scanlineRenderer.render_scanlines_aa_solid(clippingProxy, rasterizer, sl, new RGBA_Bytes(0, 0, 0, 255));
ellipseForMask.init(ellipseForMask.originX, ellipseForMask.originY, ellipseForMask.radiusX - 10, ellipseForMask.radiusY - 10, 100);
rasterizer.add_path(ellipseForMask);
scanlineRenderer.render_scanlines_aa_solid(clippingProxy, rasterizer, sl, new RGBA_Bytes(255, 0, 0, 255));
}
else
{
ellipseForMask.init(randGenerator.Next() % cx,
randGenerator.Next() % cy,
randGenerator.Next() % 100 + 20,
randGenerator.Next() % 100 + 20,
100);
// set the color to draw into the alpha channel.
// there is not very much reason to set the alpha as you will get the amount of
// transparency based on the color you draw. (you might want some type of different edeg effect but it will be minor).
rasterizer.add_path(ellipseForMask);
scanlineRenderer.render_scanlines_aa_solid(clippingProxy, rasterizer, sl, new RGBA_Bytes((int)((float)i / (float)num * 255), 0, 0, 255));
}
}
alphaMaskImageBuffer.DettachBuffer();
}
}
private unsafe void generate_alpha_mask(int cx, int cy)
{
alphaByteArray = new byte[cx * cy];
{
#if USE_CLIPPING_ALPHA_MASK
alphaMaskImageBuffer.AttachBuffer(alphaByteArray, 20 * cx + 20, cx - 40, cy - 40, cx, 8, 1);
#else
alphaMaskImageBuffer.attach(alphaByteArray, (int)cx, (int)cy, cx, 1);
#endif
ImageBuffer image = new ImageBuffer();
image.Attach(alphaMaskImageBuffer, new blender_gray(1), 1, 0, 8);
ImageClippingProxy clippingProxy = new ImageClippingProxy(image);
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
clippingProxy.clear(new ColorF(0));
VertexSource.Ellipse ellipseForMask = new MatterHackers.Agg.VertexSource.Ellipse();
System.Random randGenerator = new Random(1432);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
int i;
int num = (int)numMasksSlider.Value;
for (i = 0; i < num; i++)
{
if (i == num - 1)
{
ellipseForMask.init(Width / 2, Height / 2, 110, 110, 100);
rasterizer.add_path(ellipseForMask);
scanlineRenderer.RenderSolid(clippingProxy, rasterizer, sl, new Color(0, 0, 0, 255));
ellipseForMask.init(ellipseForMask.originX, ellipseForMask.originY, ellipseForMask.radiusX - 10, ellipseForMask.radiusY - 10, 100);
rasterizer.add_path(ellipseForMask);
scanlineRenderer.RenderSolid(clippingProxy, rasterizer, sl, new Color(255, 0, 0, 255));
}
else
{
ellipseForMask.init(randGenerator.Next() % cx,
randGenerator.Next() % cy,
randGenerator.Next() % 100 + 20,
randGenerator.Next() % 100 + 20,
100);
// set the color to draw into the alpha channel.
// there is not very much reason to set the alpha as you will get the amount of
// transparency based on the color you draw. (you might want some type of different edeg effect but it will be minor).
rasterizer.add_path(ellipseForMask);
scanlineRenderer.RenderSolid(clippingProxy, rasterizer, sl, new Color((int)((float)i / (float)num * 255), 0, 0, 255));
}
}
alphaMaskImageBuffer.DettachBuffer();
}
}
public FloodFillDemo()
{
BackgroundColor = RGBA_Bytes.White;
imageToFillOn = new ImageBuffer(400, 300, 32, new BlenderBGRA());
Graphics2D imageToFillGraphics = imageToFillOn.NewGraphics2D();
imageToFillGraphics.Clear(RGBA_Bytes.White);
imageToFillGraphics.DrawString("Click to fill", 20, 30);
imageToFillGraphics.Circle(new Vector2(200, 150), 35, RGBA_Bytes.Black);
imageToFillGraphics.Circle(new Vector2(200, 150), 30, RGBA_Bytes.Green);
imageToFillGraphics.Rectangle(20, 50, 210, 280, RGBA_Bytes.Black);
imageToFillGraphics.Rectangle(imageToFillOn.GetBounds(), RGBA_Bytes.Blue);
Random rand = new Random();
for (int i = 0; i < 20; i++)
{
Ellipse elipse = new Ellipse(rand.Next(imageToFillOn.Width), rand.Next(imageToFillOn.Height), rand.Next(10, 60), rand.Next(10, 60));
Stroke outline = new Stroke(elipse);
imageToFillGraphics.Render(outline, RGBA_Bytes.Black);
}
m_slider1 = new Slider(new Vector2(80, 10), 510);
m_slider2 = new Slider(new Vector2(80, 10 + 20), 510);
m_slider1.ValueChanged += new EventHandler(NeedsRedraw);
m_slider2.ValueChanged += new EventHandler(NeedsRedraw);
AddChild(m_slider1);
AddChild(m_slider2);
m_slider1.Text = "Pixel size={0:F3}";
m_slider1.SetRange(8, 100);
m_slider1.NumTicks = 23;
m_slider1.Value = 32;
m_slider2.Text = "gamma={0:F3}";
m_slider2.SetRange(0.0, 3.0);
m_slider2.Value = 1.0;
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
ScanlineRasterizer ras = new ScanlineRasterizer();
scanline_unpacked_8 sl = new scanline_unpacked_8();
ImageClippingProxy clippingProxy = new ImageClippingProxy(widgetsSubImage);
clippingProxy.clear(new RGBA_Floats(0, 0, 0));
m_profile.text_size(8.0);
// draw a background to show how the alpha is working
int RectWidth = 32;
int xoffset = 238;
int yoffset = 171;
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
for (int i = 0; i < 7; i++)
{
for (int j = 0; j < 7; j++)
{
if ((i + j) % 2 != 0)
{
VertexSource.RoundedRect rect = new VertexSource.RoundedRect(i * RectWidth + xoffset, j * RectWidth + yoffset,
(i + 1) * RectWidth + xoffset, (j + 1) * RectWidth + yoffset, 2);
rect.normalize_radius();
ras.add_path(rect);
scanlineRenderer.render_scanlines_aa_solid(clippingProxy, ras, sl, new RGBA_Bytes(.9, .9, .9));
}
}
}
double ini_scale = 1.0;
Transform.Affine mtx1 = Affine.NewIdentity();
mtx1 *= Affine.NewScaling(ini_scale, ini_scale);
mtx1 *= Affine.NewTranslation(center_x, center_y);
VertexSource.Ellipse e1 = new MatterHackers.Agg.VertexSource.Ellipse();
e1.init(0.0, 0.0, 110.0, 110.0, 64);
Transform.Affine mtx_g1 = Affine.NewIdentity();
mtx_g1 *= Affine.NewScaling(ini_scale, ini_scale);
mtx_g1 *= Affine.NewScaling(m_SaveData.m_scale, m_SaveData.m_scale);
mtx_g1 *= Affine.NewScaling(m_scale_x, m_scale_y);
mtx_g1 *= Affine.NewRotation(m_SaveData.m_angle);
mtx_g1 *= Affine.NewTranslation(m_SaveData.m_center_x, m_SaveData.m_center_y);
mtx_g1.invert();
RGBA_Bytes[] color_profile = new RGBA_Bytes[256]; // color_type is defined in pixel_formats.h
for (int i = 0; i < 256; i++)
{
color_profile[i] = new RGBA_Bytes(m_spline_r.spline()[i],
m_spline_g.spline()[i],
m_spline_b.spline()[i],
m_spline_a.spline()[i]);
}
VertexSourceApplyTransform t1 = new VertexSourceApplyTransform(e1, mtx1);
IGradient innerGradient = null;
switch (m_GradTypeRBox.SelectedIndex)
{
case 0:
innerGradient = new gradient_radial();
break;
case 1:
innerGradient = new gradient_diamond();
break;
case 2:
innerGradient = new gradient_x();
break;
case 3:
innerGradient = new gradient_xy();
break;
case 4:
innerGradient = new gradient_sqrt_xy();
break;
case 5:
innerGradient = new gradient_conic();
break;
}
IGradient outerGradient = null;
switch (m_GradWrapRBox.SelectedIndex)
{
case 0:
outerGradient = new gradient_reflect_adaptor(innerGradient);
break;
case 1:
outerGradient = new gradient_repeat_adaptor(innerGradient);
break;
case 2:
outerGradient = new gradient_clamp_adaptor(innerGradient);
break;
}
span_allocator span_alloc = new span_allocator();
color_function_profile colors = new color_function_profile(color_profile, m_profile.gamma());
span_interpolator_linear inter = new span_interpolator_linear(mtx_g1);
span_gradient span_gen = new span_gradient(inter, outerGradient, colors, 0, 150);
ras.add_path(t1);
scanlineRenderer.GenerateAndRender(ras, sl, clippingProxy, span_alloc, span_gen);
base.OnDraw(graphics2D);
}
public override void OnDraw(Graphics2D graphics2D)
{
GammaLookUpTable gamma = new GammaLookUpTable(m_gamma.Value);
IRecieveBlenderByte NormalBlender = new BlenderBGRA();
IRecieveBlenderByte GammaBlender = new BlenderGammaBGRA(gamma);
ImageBuffer rasterNormal = new ImageBuffer(NewGraphics2D().DestImage, NormalBlender);
ImageBuffer rasterGamma = new ImageBuffer(NewGraphics2D().DestImage, GammaBlender);
ImageClippingProxy clippingProxyNormal = new ImageClippingProxy(rasterNormal);
ImageClippingProxy clippingProxyGamma = new ImageClippingProxy(rasterGamma);
clippingProxyNormal.clear(new RGBA_Floats(0, 0, 0));
ScanlineRasterizer ras = new ScanlineRasterizer();
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
VertexSource.Ellipse e = new VertexSource.Ellipse();
// TODO: If you drag the control circles below the bottom of the window we get an exception. This does not happen in AGG.
// It needs to be debugged. Turning on clipping fixes it. But standard agg works without clipping. Could be a bigger problem than this.
//ras.clip_box(0, 0, width(), height());
// Render two "control" circles
e.init(m_x[0], m_y[0], 3, 3, 16);
ras.add_path(e);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.render_scanlines_aa_solid(clippingProxyNormal, ras, sl, new RGBA_Bytes(127, 127, 127));
e.init(m_x[1], m_y[1], 3, 3, 16);
ras.add_path(e);
scanlineRenderer.render_scanlines_aa_solid(clippingProxyNormal, ras, sl, new RGBA_Bytes(127, 127, 127));
// Creating a rounded rectangle
VertexSource.RoundedRect r = new VertexSource.RoundedRect(m_x[0], m_y[0], m_x[1], m_y[1], 10);
r.normalize_radius();
// Drawing as an outline
Stroke p = new Stroke(r);
p.width(1.0);
ras.add_path(p);
//Renderer.RenderSolid(clippingProxyGamma, ras, sl, new RGBA_Bytes(0, 0, 0));
scanlineRenderer.render_scanlines_aa_solid(clippingProxyGamma, ras, sl, new RGBA_Bytes(255, 1, 1));
/*
int i;
// radial line test
//-------------------------
dashed_line<rasterizer_type,
renderer_scanline_type,
scanline_type> dash(ras, ren_sl, sl);
double cx = width() / 2.0;
double cy = height() / 2.0;
ren_sl.color(agg::rgba(1.0, 1.0, 1.0, 0.2));
for(i = 180; i > 0; i--)
{
double n = 2.0 * agg::pi * i / 180.0;
dash.draw(cx + min(cx, cy) * sin(n), cy + min(cx, cy) * cos(n),
cx, cy,
1.0, (i < 90) ? i : 0.0);
}
typedef agg::gradient_x gradient_func_type;
typedef agg::span_interpolator_linear<> interpolator_type;
typedef agg::span_allocator<color_type> span_allocator_type;
typedef agg::pod_auto_array<color_type, 256> color_array_type;
typedef agg::span_gradient<color_type,
interpolator_type,
gradient_func_type,
color_array_type> span_gradient_type;
typedef agg::renderer_scanline_aa<renderer_base_type,
span_allocator_type,
span_gradient_type> renderer_gradient_type;
gradient_func_type gradient_func; // The gradient function
agg::trans_affine gradient_mtx; // Affine transformer
interpolator_type span_interpolator(gradient_mtx); // Span interpolator
span_allocator_type span_allocator; // Span Allocator
color_array_type gradient_colors; // The gradient colors
span_gradient_type span_gradient(span_interpolator,
gradient_func,
gradient_colors,
0, 100);
renderer_gradient_type ren_gradient(ren_base, span_allocator, span_gradient);
dashed_line<rasterizer_type,
renderer_gradient_type,
scanline_type> dash_gradient(ras, ren_gradient, sl);
double x1, y1, x2, y2;
for(i = 1; i <= 20; i++)
{
ren_sl.color(agg::rgba(1,1,1));
// integral point sizes 1..20
//----------------
agg::ellipse ell;
ell.init(20 + i * (i + 1) + 0.5,
20.5,
i / 2.0,
i / 2.0,
8 + i);
ras.reset();
ras.add_path(ell);
agg::render_scanlines(ras, sl, ren_sl);
// fractional point sizes 0..2
//----------------
ell.init(18 + i * 4 + 0.5, 33 + 0.5,
i/20.0, i/20.0,
8);
ras.reset();
ras.add_path(ell);
agg::render_scanlines(ras, sl, ren_sl);
// fractional point positioning
//---------------
ell.init(18 + i * 4 + (i-1) / 10.0 + 0.5,
27 + (i - 1) / 10.0 + 0.5,
0.5, 0.5, 8);
ras.reset();
ras.add_path(ell);
agg::render_scanlines(ras, sl, ren_sl);
// integral line widths 1..20
//----------------
fill_color_array(gradient_colors,
agg::rgba(1,1,1),
agg::rgba(i % 2, (i % 3) * 0.5, (i % 5) * 0.25));
x1 = 20 + i* (i + 1);
y1 = 40.5;
x2 = 20 + i * (i + 1) + (i - 1) * 4;
y2 = 100.5;
calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
dash_gradient.draw(x1, y1, x2, y2, i, 0);
fill_color_array(gradient_colors,
agg::rgba(1,0,0),
agg::rgba(0,0,1));
// fractional line lengths H (red/blue)
//----------------
x1 = 17.5 + i * 4;
y1 = 107;
x2 = 17.5 + i * 4 + i/6.66666667;
y2 = 107;
calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
dash_gradient.draw(x1, y1, x2, y2, 1.0, 0);
// fractional line lengths V (red/blue)
//---------------
x1 = 18 + i * 4;
y1 = 112.5;
x2 = 18 + i * 4;
y2 = 112.5 + i / 6.66666667;
calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
dash_gradient.draw(x1, y1, x2, y2, 1.0, 0);
// fractional line positioning (red)
//---------------
fill_color_array(gradient_colors,
agg::rgba(1,0,0),
agg::rgba(1,1,1));
x1 = 21.5;
y1 = 120 + (i - 1) * 3.1;
x2 = 52.5;
y2 = 120 + (i - 1) * 3.1;
calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
dash_gradient.draw(x1, y1, x2, y2, 1.0, 0);
// fractional line width 2..0 (green)
fill_color_array(gradient_colors,
agg::rgba(0,1,0),
agg::rgba(1,1,1));
x1 = 52.5;
y1 = 118 + i * 3;
x2 = 83.5;
y2 = 118 + i * 3;
calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
dash_gradient.draw(x1, y1, x2, y2, 2.0 - (i - 1) / 10.0, 0);
// stippled fractional width 2..0 (blue)
fill_color_array(gradient_colors,
agg::rgba(0,0,1),
agg::rgba(1,1,1));
x1 = 83.5;
y1 = 119 + i * 3;
x2 = 114.5;
y2 = 119 + i * 3;
calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
dash_gradient.draw(x1, y1, x2, y2, 2.0 - (i - 1) / 10.0, 3.0);
ren_sl.color(agg::rgba(1,1,1));
if(i <= 10)
{
// integral line width, horz aligned (mipmap test)
//-------------------
dash.draw(125.5, 119.5 + (i + 2) * (i / 2.0),
135.5, 119.5 + (i + 2) * (i / 2.0),
i, 0.0);
}
// fractional line width 0..2, 1 px H
//-----------------
dash.draw(17.5 + i * 4, 192, 18.5 + i * 4, 192, i / 10.0, 0);
// fractional line positioning, 1 px H
//-----------------
dash.draw(17.5 + i * 4 + (i - 1) / 10.0, 186,
18.5 + i * 4 + (i - 1) / 10.0, 186,
1.0, 0);
}
// Triangles
//---------------
for (int i = 1; i <= 13; i++)
{
fill_color_array(gradient_colors,
agg::rgba(1,1,1),
agg::rgba(i % 2, (i % 3) * 0.5, (i % 5) * 0.25));
calc_linear_gradient_transform(width() - 150,
height() - 20 - i * (i + 1.5),
width() - 20,
height() - 20 - i * (i + 1),
gradient_mtx);
ras.reset();
ras.move_to_d(width() - 150, height() - 20 - i * (i + 1.5));
ras.line_to_d(width() - 20, height() - 20 - i * (i + 1));
ras.line_to_d(width() - 20, height() - 20 - i * (i + 2));
agg::render_scanlines(ras, sl, ren_gradient);
}
*/
base.OnDraw(graphics2D);
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
ScanlineRasterizer ras = new ScanlineRasterizer();
scanline_unpacked_8 sl = new scanline_unpacked_8();
ImageClippingProxy clippingProxy = new ImageClippingProxy(widgetsSubImage);
clippingProxy.clear(new RGBA_Floats(0, 0, 0));
m_profile.text_size(8.0);
// draw a background to show how the alpha is working
int RectWidth = 32;
int xoffset = 238;
int yoffset = 171;
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
for (int i = 0; i < 7; i++)
{
for (int j = 0; j < 7; j++)
{
if ((i + j) % 2 != 0)
{
VertexSource.RoundedRect rect = new VertexSource.RoundedRect(i * RectWidth + xoffset, j * RectWidth + yoffset,
(i + 1) * RectWidth + xoffset, (j + 1) * RectWidth + yoffset, 2);
rect.normalize_radius();
ras.add_path(rect);
scanlineRenderer.RenderSolid(clippingProxy, ras, sl, new RGBA_Bytes(.9, .9, .9));
}
}
}
double ini_scale = 1.0;
Transform.Affine mtx1 = Affine.NewIdentity();
mtx1 *= Affine.NewScaling(ini_scale, ini_scale);
mtx1 *= Affine.NewTranslation(center_x, center_y);
VertexSource.Ellipse e1 = new MatterHackers.Agg.VertexSource.Ellipse();
e1.init(0.0, 0.0, 110.0, 110.0, 64);
Transform.Affine mtx_g1 = Affine.NewIdentity();
mtx_g1 *= Affine.NewScaling(ini_scale, ini_scale);
mtx_g1 *= Affine.NewScaling(m_SaveData.m_scale, m_SaveData.m_scale);
mtx_g1 *= Affine.NewScaling(m_scale_x, m_scale_y);
mtx_g1 *= Affine.NewRotation(m_SaveData.m_angle);
mtx_g1 *= Affine.NewTranslation(m_SaveData.m_center_x, m_SaveData.m_center_y);
mtx_g1.invert();
RGBA_Bytes[] color_profile = new RGBA_Bytes[256]; // color_type is defined in pixel_formats.h
for (int i = 0; i < 256; i++)
{
color_profile[i] = new RGBA_Bytes(m_spline_r.spline()[i],
m_spline_g.spline()[i],
m_spline_b.spline()[i],
m_spline_a.spline()[i]);
}
VertexSourceApplyTransform t1 = new VertexSourceApplyTransform(e1, mtx1);
IGradient innerGradient = null;
switch (m_GradTypeRBox.SelectedIndex)
{
case 0:
innerGradient = new gradient_radial();
break;
case 1:
innerGradient = new gradient_diamond();
break;
case 2:
innerGradient = new gradient_x();
break;
case 3:
innerGradient = new gradient_xy();
break;
case 4:
innerGradient = new gradient_sqrt_xy();
break;
case 5:
innerGradient = new gradient_conic();
break;
}
IGradient outerGradient = null;
switch (m_GradWrapRBox.SelectedIndex)
{
case 0:
outerGradient = new gradient_reflect_adaptor(innerGradient);
break;
case 1:
outerGradient = new gradient_repeat_adaptor(innerGradient);
break;
case 2:
outerGradient = new gradient_clamp_adaptor(innerGradient);
break;
}
span_allocator span_alloc = new span_allocator();
color_function_profile colors = new color_function_profile(color_profile, m_profile.gamma());
span_interpolator_linear inter = new span_interpolator_linear(mtx_g1);
span_gradient span_gen = new span_gradient(inter, outerGradient, colors, 0, 150);
ras.add_path(t1);
scanlineRenderer.GenerateAndRender(ras, sl, clippingProxy, span_alloc, span_gen);
base.OnDraw(graphics2D);
}
public void Circle(double x, double y, double radius, RGBA_Bytes color)
{
Ellipse elipse = new Ellipse(x, y, radius, radius);
Render(elipse, color);
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
if (orignialSize.x == 0)
{
orignialSize.x = WindowSize.x;
orignialSize.y = WindowSize.y;
}
ImageBuffer destImageWithPreMultBlender = new ImageBuffer();
switch (widgetsSubImage.BitDepth)
{
case 24:
destImageWithPreMultBlender.Attach(widgetsSubImage, new BlenderPreMultBGR());
break;
case 32:
destImageWithPreMultBlender.Attach(widgetsSubImage, new BlenderPreMultBGRA());
break;
default:
throw new Exception("Unknown bit depth");
}
ImageClippingProxy clippingProxy_pre = new ImageClippingProxy(destImageWithPreMultBlender);
clippingProxy_pre.clear(new RGBA_Floats(1.0, 1.0, 1.0));
Affine src_mtx = Affine.NewIdentity();
src_mtx *= Affine.NewTranslation(-orignialSize.x / 2 - 10, -orignialSize.y / 2 - 20 - 10);
src_mtx *= Affine.NewRotation(drawAngle.Value * Math.PI / 180.0);
src_mtx *= Affine.NewScaling(drawScale.Value);
src_mtx *= Affine.NewTranslation(orignialSize.x / 2, orignialSize.y / 2 + 20);
Affine img_mtx = Affine.NewIdentity();
img_mtx *= Affine.NewTranslation(-orignialSize.x / 2 + 10, -orignialSize.y / 2 + 20 + 10);
img_mtx *= Affine.NewRotation(drawAngle.Value * Math.PI / 180.0);
img_mtx *= Affine.NewScaling(drawScale.Value);
img_mtx *= Affine.NewTranslation(orignialSize.x / 2, orignialSize.y / 2 + 20);
img_mtx.invert();
MatterHackers.Agg.span_allocator sa = new span_allocator();
span_interpolator_linear interpolator = new span_interpolator_linear(img_mtx);
span_image_filter sg;
switch (sourceImage.BitDepth)
{
case 24:
{
ImageBufferAccessorClip source = new ImageBufferAccessorClip(sourceImage, RGBA_Floats.rgba_pre(0, 0, 0, 0).GetAsRGBA_Bytes());
sg = new span_image_filter_rgb_bilinear_clip(source, RGBA_Floats.rgba_pre(0, 0.4, 0, 0.5), interpolator);
}
break;
case 32:
{
ImageBufferAccessorClip source = new ImageBufferAccessorClip(sourceImage, RGBA_Floats.rgba_pre(0, 0, 0, 0).GetAsRGBA_Bytes());
sg = new span_image_filter_rgba_bilinear_clip(source, RGBA_Floats.rgba_pre(0, 0.4, 0, 0.5), interpolator);
}
break;
default:
throw new Exception("Bad sourc depth");
}
ScanlineRasterizer ras = new ScanlineRasterizer();
ras.SetVectorClipBox(0, 0, Width, Height);
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
//scanline_unpacked_8 sl = new scanline_unpacked_8();
double r = orignialSize.x;
if (orignialSize.y - 60 < r)
{
r = orignialSize.y - 60;
}
VertexSource.Ellipse ell = new VertexSource.Ellipse(orignialSize.x / 2.0 + 10,
orignialSize.y / 2.0 + 20 + 10,
r / 2.0 + 16.0,
r / 2.0 + 16.0, 200);
VertexSourceApplyTransform tr = new VertexSourceApplyTransform(ell, src_mtx);
ras.add_path(tr);
//clippingProxy_pre.SetClippingBox(30, 0, (int)width(), (int)height());
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.GenerateAndRender(ras, sl, clippingProxy_pre, sa, sg);
base.OnDraw(graphics2D);
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
IImageByte backBuffer = widgetsSubImage;
GammaLookUpTable gamma = new GammaLookUpTable(m_gamma.Value);
IRecieveBlenderByte NormalBlender = new BlenderBGRA();
IRecieveBlenderByte GammaBlender = new BlenderGammaBGRA(gamma);
ImageBuffer rasterNormal = new ImageBuffer();
rasterNormal.Attach(backBuffer, NormalBlender);
ImageBuffer rasterGamma = new ImageBuffer();
rasterGamma.Attach(backBuffer, GammaBlender);
ImageClippingProxy clippingProxyNormal = new ImageClippingProxy(rasterNormal);
ImageClippingProxy clippingProxyGamma = new ImageClippingProxy(rasterGamma);
clippingProxyNormal.clear(m_white_on_black.Checked ? new ColorF(0, 0, 0) : new ColorF(1, 1, 1));
ScanlineRasterizer ras = new ScanlineRasterizer();
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
VertexSource.Ellipse e = new VertexSource.Ellipse();
// TODO: If you drag the control circles below the bottom of the window we get an exception. This does not happen in AGG.
// It needs to be debugged. Turning on clipping fixes it. But standard agg works without clipping. Could be a bigger problem than this.
//ras.clip_box(0, 0, width(), height());
// Render two "control" circles
e.init(m_x[0], m_y[0], 3, 3, 16);
ras.add_path(e);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.RenderSolid(clippingProxyNormal, ras, sl, new Color(127, 127, 127));
e.init(m_x[1], m_y[1], 3, 3, 16);
ras.add_path(e);
scanlineRenderer.RenderSolid(clippingProxyNormal, ras, sl, new Color(127, 127, 127));
double d = m_offset.Value;
// Creating a rounded rectangle
VertexSource.RoundedRect r = new VertexSource.RoundedRect(m_x[0] + d, m_y[0] + d, m_x[1] + d, m_y[1] + d, m_radius.Value);
r.normalize_radius();
// Drawing as an outline
if (!m_DrawAsOutlineCheckBox.Checked)
{
Stroke p = new Stroke(r);
p.width(1.0);
ras.add_path(p);
}
else
{
ras.add_path(r);
}
scanlineRenderer.RenderSolid(clippingProxyGamma, ras, sl, m_white_on_black.Checked ? new Color(255, 255, 255) : new Color(0, 0, 0));
base.OnDraw(graphics2D);
}
private bool SetImageFast()
{
if (this.ItemWrapper == null)
{
this.thumbnailImage = new ImageBuffer(this.noThumbnailImage);
this.Invalidate();
return true;
}
if (this.ItemWrapper.FileLocation == QueueData.SdCardFileName)
{
switch (this.Size)
{
case ImageSizes.Size115x115:
{
this.thumbnailImage = StaticData.Instance.LoadIcon(Path.ChangeExtension("icon_sd_card_115x115", partExtension)).InvertLightness();
}
break;
case ImageSizes.Size50x50:
{
this.thumbnailImage = StaticData.Instance.LoadIcon(Path.ChangeExtension("icon_sd_card_50x50", partExtension)).InvertLightness();
}
break;
default:
throw new NotImplementedException();
}
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Ellipse outline = new Ellipse(new Vector2(Width / 2.0, Height / 2.0), Width / 2 - Width / 12);
graphics.Render(new Stroke(outline, Width / 12), RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
else if (Path.GetExtension(this.ItemWrapper.FileLocation).ToUpper() == ".GCODE")
{
CreateImage(this, Width, Height);
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Vector2 center = new Vector2(Width / 2.0, Height / 2.0);
Ellipse outline = new Ellipse(center, Width / 2 - Width / 12);
graphics.Render(new Stroke(outline, Width / 12), RGBA_Bytes.White);
graphics.DrawString("GCode", center.x, center.y, 8 * Width / 50, Agg.Font.Justification.Center, Agg.Font.Baseline.BoundsCenter, color: RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
else if (!File.Exists(this.ItemWrapper.FileLocation))
{
CreateImage(this, Width, Height);
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Vector2 center = new Vector2(Width / 2.0, Height / 2.0);
graphics.DrawString("Missing", center.x, center.y, 8 * Width / 50, Agg.Font.Justification.Center, Agg.Font.Baseline.BoundsCenter, color: RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
else if (MeshIsTooBigToLoad(this.ItemWrapper.FileLocation))
{
CreateImage(this, Width, Height);
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Vector2 center = new Vector2(Width / 2.0, Height / 2.0);
double yOffset = 8 * Width / 50 * GuiWidget.DeviceScale * 2;
graphics.DrawString("Reduce\nPolygons\nto\nRender", center.x, center.y + yOffset, 8 * Width / 50, Agg.Font.Justification.Center, Agg.Font.Baseline.BoundsCenter, color: RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
string stlHashCode = this.ItemWrapper.FileHashCode.ToString();
if (stlHashCode != "0")
{
ImageBuffer bigRender = LoadImageFromDisk(this, stlHashCode);
if (bigRender == null)
{
this.thumbnailImage = new ImageBuffer(buildingThumbnailImage);
return false;
}
bigRender.SetRecieveBlender(new BlenderPreMultBGRA());
this.thumbnailImage = ImageBuffer.CreateScaledImage(bigRender, (int)Width, (int)Height);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
return false;
}
public void DrawTrackballRadius(Graphics2D graphics2D)
{
var center = TrackBallController.ScreenCenter;
var radius = TrackBallController.TrackBallRadius;
var elipse = new Ellipse(center, radius, radius);
var outline = new Stroke(elipse, 3);
graphics2D.Render(outline, RotationHelperCircleColor);
if (insideArrows.Count == 0)
{
MakeArrowIcons();
}
if (TrackBallController.LastMoveInsideRadius)
{
foreach (IVertexSource arrow in insideArrows)
{
graphics2D.Render(arrow, RotationHelperCircleColor);
}
}
else
{
foreach (IVertexSource arrow in outsideArrows)
{
graphics2D.Render(arrow, RotationHelperCircleColor);
}
}
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
IImageByte backBuffer = widgetsSubImage;
if (!didInit)
{
didInit = true;
OnInitialize();
}
ImageBuffer image;
if (backBuffer.BitDepth == 32)
{
image = new ImageBuffer();
image.Attach(backBuffer, new BlenderBGRA());
}
else
{
if (backBuffer.BitDepth != 24)
{
throw new System.NotSupportedException();
}
image = new ImageBuffer();
image.Attach(backBuffer, new BlenderBGR());
}
ImageClippingProxy clippingProxy = new ImageClippingProxy(image);
clippingProxy.clear(new RGBA_Floats(1, 1, 1));
g_rasterizer.SetVectorClipBox(0, 0, Width, Height);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
if (transformationTypeRadioButton.SelectedIndex == 0)
{
Bilinear tr = new Bilinear(lionShape.Bounds.Left, lionShape.Bounds.Bottom, lionShape.Bounds.Right, lionShape.Bounds.Top, quadPolygonControl.polygon());
if (tr.is_valid())
{
//--------------------------
// Render transformed lion
//
VertexSourceApplyTransform trans = new VertexSourceApplyTransform(lionShape.Path, tr);
scanlineRenderer.RenderSolidAllPaths(clippingProxy, g_rasterizer, g_scanline, trans, lionShape.Colors, lionShape.PathIndex, lionShape.NumPaths);
//--------------------------
//--------------------------
// Render transformed ellipse
//
VertexSource.Ellipse ell = new MatterHackers.Agg.VertexSource.Ellipse((lionShape.Bounds.Left + lionShape.Bounds.Right) * 0.5, (lionShape.Bounds.Bottom + lionShape.Bounds.Top) * 0.5,
(lionShape.Bounds.Right - lionShape.Bounds.Left) * 0.5, (lionShape.Bounds.Top - lionShape.Bounds.Bottom) * 0.5,
200);
Stroke ell_stroke = new Stroke(ell);
ell_stroke.width(3.0);
VertexSourceApplyTransform trans_ell = new VertexSourceApplyTransform(ell, tr);
VertexSourceApplyTransform trans_ell_stroke = new VertexSourceApplyTransform(ell_stroke, tr);
g_rasterizer.add_path(trans_ell);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new RGBA_Bytes(0.5, 0.3, 0.0, 0.3));
g_rasterizer.add_path(trans_ell_stroke);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new RGBA_Bytes(0.0, 0.3, 0.2, 1.0));
}
}
else
{
Perspective tr = new Perspective(lionShape.Bounds.Left, lionShape.Bounds.Bottom, lionShape.Bounds.Right, lionShape.Bounds.Top, quadPolygonControl.polygon());
if (tr.is_valid())
{
// Render transformed lion
VertexSourceApplyTransform trans = new VertexSourceApplyTransform(lionShape.Path, tr);
scanlineRenderer.RenderSolidAllPaths(clippingProxy, g_rasterizer, g_scanline, trans, lionShape.Colors, lionShape.PathIndex, lionShape.NumPaths);
// Render transformed ellipse
VertexSource.Ellipse FilledEllipse = new MatterHackers.Agg.VertexSource.Ellipse((lionShape.Bounds.Left + lionShape.Bounds.Right) * 0.5, (lionShape.Bounds.Bottom + lionShape.Bounds.Top) * 0.5,
(lionShape.Bounds.Right - lionShape.Bounds.Left) * 0.5, (lionShape.Bounds.Top - lionShape.Bounds.Bottom) * 0.5,
200);
Stroke EllipseOutline = new Stroke(FilledEllipse);
EllipseOutline.width(3.0);
VertexSourceApplyTransform TransformedFilledEllipse = new VertexSourceApplyTransform(FilledEllipse, tr);
VertexSourceApplyTransform TransformedEllipesOutline = new VertexSourceApplyTransform(EllipseOutline, tr);
g_rasterizer.add_path(TransformedFilledEllipse);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new RGBA_Bytes(0.5, 0.3, 0.0, 0.3));
g_rasterizer.add_path(TransformedEllipesOutline);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new RGBA_Bytes(0.0, 0.3, 0.2, 1.0));
}
}
//--------------------------
// Render the "quad" tool and controls
g_rasterizer.add_path(quadPolygonControl);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new RGBA_Bytes(0, 0.3, 0.5, 0.6));
//m_trans_type.Render(g_rasterizer, g_scanline, clippingProxy);
base.OnDraw(graphics2D);
}
public override void OnDraw(Graphics2D graphics2D)
{
if (graphics2D.DestImage != null)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
IImageByte backBuffer = widgetsSubImage;
int distBetween = backBuffer.GetBytesBetweenPixelsInclusive();
ImageBuffer redImageBuffer = new ImageBuffer();
redImageBuffer.Attach(backBuffer, new blender_gray(distBetween), distBetween, 2, 8);
ImageBuffer greenImageBuffer = new ImageBuffer();
greenImageBuffer.Attach(backBuffer, new blender_gray(distBetween), distBetween, 1, 8);
ImageBuffer blueImageBuffer = new ImageBuffer();
blueImageBuffer.Attach(backBuffer, new blender_gray(distBetween), distBetween, 0, 8);
ImageClippingProxy clippingProxy = new ImageClippingProxy(backBuffer);
ImageClippingProxy clippingProxyRed = new ImageClippingProxy(redImageBuffer);
ImageClippingProxy clippingProxyGreen = new ImageClippingProxy(greenImageBuffer);
ImageClippingProxy clippingProxyBlue = new ImageClippingProxy(blueImageBuffer);
ScanlineRasterizer ras = new ScanlineRasterizer();
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
RGBA_Bytes clearColor = useBlackBackgroundCheckbox.Checked ? new RGBA_Bytes(0, 0, 0) : new RGBA_Bytes(255, 255, 255);
clippingProxy.clear(clearColor);
alphaSlider.View.BackgroundColor = clearColor;
RGBA_Bytes FillColor = useBlackBackgroundCheckbox.Checked ? new RGBA_Bytes(255, 255, 255, (int)(alphaSlider.Value)) : new RGBA_Bytes(0, 0, 0, (int)(alphaSlider.Value));
VertexSource.Ellipse er = new MatterHackers.Agg.VertexSource.Ellipse(Width / 2 - 0.87 * 50, Height / 2 - 0.5 * 50, 100, 100, 100);
ras.add_path(er);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.render_scanlines_aa_solid(clippingProxyRed, ras, sl, FillColor);
VertexSource.Ellipse eg = new MatterHackers.Agg.VertexSource.Ellipse(Width / 2 + 0.87 * 50, Height / 2 - 0.5 * 50, 100, 100, 100);
ras.add_path(eg);
scanlineRenderer.render_scanlines_aa_solid(clippingProxyGreen, ras, sl, FillColor);
VertexSource.Ellipse eb = new MatterHackers.Agg.VertexSource.Ellipse(Width / 2, Height / 2 + 50, 100, 100, 100);
ras.add_path(eb);
scanlineRenderer.render_scanlines_aa_solid(clippingProxyBlue, ras, sl, FillColor);
}
else if (graphics2D.DestImageFloat != null)
{
#if false
IImageFloat backBuffer = graphics2D.DestImageFloat;
int distBetween = backBuffer.GetFloatsBetweenPixelsInclusive();
ImageBufferFloat redImageBuffer = new ImageBufferFloat();
redImageBuffer.Attach(backBuffer, new blender_gray(distBetween), distBetween, 2, 8);
ImageBufferFloat greenImageBuffer = new ImageBufferFloat();
greenImageBuffer.Attach(backBuffer, new blender_gray(distBetween), distBetween, 1, 8);
ImageBufferFloat blueImageBuffer = new ImageBufferFloat();
blueImageBuffer.Attach(backBuffer, new blender_gray(distBetween), distBetween, 0, 8);
ImageClippingProxy clippingProxy = new ImageClippingProxy(backBuffer);
ImageClippingProxy clippingProxyRed = new ImageClippingProxy(redImageBuffer);
ImageClippingProxy clippingProxyGreen = new ImageClippingProxy(greenImageBuffer);
ImageClippingProxy clippingProxyBlue = new ImageClippingProxy(blueImageBuffer);
ScanlineRasterizer ras = new ScanlineRasterizer();
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
RGBA_Bytes clearColor = useBlackBackgroundCheckbox.Checked ? new RGBA_Bytes(0, 0, 0) : new RGBA_Bytes(255, 255, 255);
clippingProxy.clear(clearColor);
alphaSlider.View.BackGroundColor = clearColor;
RGBA_Bytes FillColor = useBlackBackgroundCheckbox.Checked ? new RGBA_Bytes(255, 255, 255, (int)(alphaSlider.Value)) : new RGBA_Bytes(0, 0, 0, (int)(alphaSlider.Value));
VertexSource.Ellipse er = new AGG.VertexSource.Ellipse(Width / 2 - 0.87 * 50, Height / 2 - 0.5 * 50, 100, 100, 100);
ras.add_path(er);
agg_renderer_scanline.Default.render_scanlines_aa_solid(clippingProxyRed, ras, sl, FillColor);
VertexSource.Ellipse eg = new AGG.VertexSource.Ellipse(Width / 2 + 0.87 * 50, Height / 2 - 0.5 * 50, 100, 100, 100);
ras.add_path(eg);
agg_renderer_scanline.Default.render_scanlines_aa_solid(clippingProxyGreen, ras, sl, FillColor);
VertexSource.Ellipse eb = new AGG.VertexSource.Ellipse(Width / 2, Height / 2 + 50, 100, 100, 100);
ras.add_path(eb);
agg_renderer_scanline.Default.render_scanlines_aa_solid(clippingProxyBlue, ras, sl, FillColor);
#endif
}
base.OnDraw(graphics2D);
}
void createThumbnailWorker_DoWork(object sender, DoWorkEventArgs e)
{
PartThumbnailWidget thumbnailWidget = e.Argument as PartThumbnailWidget;
if (thumbnailWidget != null)
{
if (thumbnailWidget.printItem == null)
{
thumbnailWidget.thumbnailImage = new ImageBuffer(thumbnailWidget.noThumbnailImage);
thumbnailWidget.Invalidate();
return;
}
if (thumbnailWidget.PrintItem.FileLocation == QueueData.SdCardFileName)
{
switch (thumbnailWidget.Size)
{
case ImageSizes.Size115x115:
{
ImageIO.LoadImageData(this.GetImageLocation("icon_sd_card_115x115.png"), thumbnailWidget.thumbnailImage);
}
break;
case ImageSizes.Size50x50:
{
ImageIO.LoadImageData(this.GetImageLocation("icon_sd_card_50x50.png"), thumbnailWidget.thumbnailImage);
}
break;
default:
throw new NotImplementedException();
}
thumbnailWidget.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = thumbnailWidget.thumbnailImage.NewGraphics2D();
Ellipse outline = new Ellipse(new Vector2(Width / 2.0, Height / 2.0), Width/2 + Width/12);
graphics.Render(new Stroke(outline, 4), RGBA_Bytes.White);
UiThread.RunOnIdle(thumbnailWidget.EnsureImageUpdated);
return;
}
string stlHashCode = thumbnailWidget.PrintItem.StlFileHashCode.ToString();
Point2D bigRenderSize = new Point2D(460, 460);
ImageBuffer bigRender = LoadImageFromDisk(thumbnailWidget, stlHashCode, bigRenderSize);
if (bigRender == null)
{
Mesh loadedMesh = StlProcessing.Load(thumbnailWidget.PrintItem.FileLocation);
thumbnailWidget.thumbnailImage = new ImageBuffer(thumbnailWidget.buildingThumbnailImage);
thumbnailWidget.thumbnailImage.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
bigRender = BuildImageFromSTL(loadedMesh, stlHashCode, bigRenderSize);
if (bigRender == null)
{
bigRender = new ImageBuffer(thumbnailWidget.noThumbnailImage);
}
}
switch (thumbnailWidget.Size)
{
case ImageSizes.Size50x50:
{
ImageBuffer halfWay1 = new ImageBuffer(200, 200, 32, new BlenderBGRA());
halfWay1.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
halfWay1.NewGraphics2D().Render(bigRender, 0, 0, 0, (double)halfWay1.Width / bigRender.Width, (double)halfWay1.Height / bigRender.Height);
ImageBuffer halfWay2 = new ImageBuffer(100, 100, 32, new BlenderBGRA());
halfWay2.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
halfWay2.NewGraphics2D().Render(halfWay1, 0, 0, 0, (double)halfWay2.Width / halfWay1.Width, (double)halfWay2.Height / halfWay1.Height);
thumbnailWidget.thumbnailImage = new ImageBuffer((int)Width, (int)Height, 32, new BlenderBGRA());
thumbnailWidget.thumbnailImage.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
thumbnailWidget.thumbnailImage.NewGraphics2D().Render(halfWay2, 0, 0, 0, (double)thumbnailWidget.thumbnailImage.Width / halfWay2.Width, (double)thumbnailWidget.thumbnailImage.Height / halfWay2.Height);
}
break;
case ImageSizes.Size115x115:
{
ImageBuffer halfWay1 = new ImageBuffer(230, 230, 32, new BlenderBGRA());
halfWay1.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
halfWay1.NewGraphics2D().Render(bigRender, 0, 0, 0, (double)halfWay1.Width / bigRender.Width, (double)halfWay1.Height / bigRender.Height);
thumbnailWidget.thumbnailImage = new ImageBuffer((int)Width, (int)Height, 32, new BlenderBGRA());
thumbnailWidget.thumbnailImage.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
thumbnailWidget.thumbnailImage.NewGraphics2D().Render(halfWay1, 0, 0, 0, (double)thumbnailWidget.thumbnailImage.Width / halfWay1.Width, (double)thumbnailWidget.thumbnailImage.Height / halfWay1.Height);
}
break;
default:
throw new NotImplementedException();
}
UiThread.RunOnIdle(thumbnailWidget.EnsureImageUpdated);
}
}
private bool SetImageFast()
{
if (this.ItemWrapper == null)
{
this.thumbnailImage = new ImageBuffer(this.noThumbnailImage);
this.Invalidate();
return true;
}
if (this.ItemWrapper.FileLocation == QueueData.SdCardFileName)
{
switch (this.Size)
{
case ImageSizes.Size115x115:
{
StaticData.Instance.LoadIcon(Path.ChangeExtension("icon_sd_card_115x115", partExtension), this.thumbnailImage);
}
break;
case ImageSizes.Size50x50:
{
StaticData.Instance.LoadIcon(Path.ChangeExtension("icon_sd_card_50x50", partExtension), this.thumbnailImage);
}
break;
default:
throw new NotImplementedException();
}
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Ellipse outline = new Ellipse(new Vector2(Width / 2.0, Height / 2.0), Width / 2 - Width / 12);
graphics.Render(new Stroke(outline, Width / 12), RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
else if (Path.GetExtension(this.ItemWrapper.FileLocation).ToUpper() == ".GCODE")
{
CreateImage(this, Width, Height);
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Vector2 center = new Vector2(Width / 2.0, Height / 2.0);
Ellipse outline = new Ellipse(center, Width / 2 - Width / 12);
graphics.Render(new Stroke(outline, Width / 12), RGBA_Bytes.White);
graphics.DrawString("GCode", center.x, center.y, 8 * Width / 50, Agg.Font.Justification.Center, Agg.Font.Baseline.BoundsCenter, color: RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
else if (!File.Exists(this.ItemWrapper.FileLocation))
{
CreateImage(this, Width, Height);
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Vector2 center = new Vector2(Width / 2.0, Height / 2.0);
graphics.DrawString("Missing", center.x, center.y, 8 * Width / 50, Agg.Font.Justification.Center, Agg.Font.Baseline.BoundsCenter, color: RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
else if (MeshIsTooBigToLoad(this.ItemWrapper.FileLocation))
{
CreateImage(this, Width, Height);
this.thumbnailImage.SetRecieveBlender(new BlenderPreMultBGRA());
Graphics2D graphics = this.thumbnailImage.NewGraphics2D();
Vector2 center = new Vector2(Width / 2.0, Height / 2.0);
double yOffset = 8 * Width / 50 * TextWidget.GlobalPointSizeScaleRatio * 1.5;
graphics.DrawString("Too Big\nto\nRender", center.x, center.y + yOffset, 8 * Width / 50, Agg.Font.Justification.Center, Agg.Font.Baseline.BoundsCenter, color: RGBA_Bytes.White);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
string stlHashCode = this.ItemWrapper.FileHashCode.ToString();
if (stlHashCode != "0")
{
ImageBuffer bigRender = LoadImageFromDisk(this, stlHashCode);
if (bigRender == null)
{
this.thumbnailImage = new ImageBuffer(buildingThumbnailImage);
return false;
}
ImageBuffer unScaledImage = new ImageBuffer(bigRender.Width, bigRender.Height, 32, new BlenderBGRA());
unScaledImage.NewGraphics2D().Render(bigRender, 0, 0);
// If the source image (the one we downloaded) is more than twice as big as our dest image.
while (unScaledImage.Width > Width * 2)
{
// The image sampler we use is a 2x2 filter so we need to scale by a max of 1/2 if we want to get good results.
// So we scale as many times as we need to to get the Image to be the right size.
// If this were going to be a non-uniform scale we could do the x and y separatly to get better results.
ImageBuffer halfImage = new ImageBuffer(unScaledImage.Width / 2, unScaledImage.Height / 2, 32, new BlenderBGRA());
halfImage.NewGraphics2D().Render(unScaledImage, 0, 0, 0, halfImage.Width / (double)unScaledImage.Width, halfImage.Height / (double)unScaledImage.Height);
unScaledImage = halfImage;
}
this.thumbnailImage = new ImageBuffer((int)Width, (int)Height, 32, new BlenderBGRA());
this.thumbnailImage.NewGraphics2D().Clear(new RGBA_Bytes(255, 255, 255, 0));
this.thumbnailImage.NewGraphics2D().Render(unScaledImage, 0, 0, 0, (double)this.thumbnailImage.Width / unScaledImage.Width, (double)this.thumbnailImage.Height / unScaledImage.Height);
UiThread.RunOnIdle(this.EnsureImageUpdated);
return true;
}
return false;
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
IImageByte backBuffer = widgetsSubImage;
GammaLookUpTable gamma = new GammaLookUpTable(m_gamma.Value);
IRecieveBlenderByte NormalBlender = new BlenderBGRA();
IRecieveBlenderByte GammaBlender = new BlenderGammaBGRA(gamma);
ImageBuffer rasterNormal = new ImageBuffer();
rasterNormal.Attach(backBuffer, NormalBlender);
ImageBuffer rasterGamma = new ImageBuffer();
rasterGamma.Attach(backBuffer, GammaBlender);
ImageClippingProxy clippingProxyNormal = new ImageClippingProxy(rasterNormal);
ImageClippingProxy clippingProxyGamma = new ImageClippingProxy(rasterGamma);
clippingProxyNormal.clear(m_white_on_black.Checked ? new RGBA_Floats(0, 0, 0) : new RGBA_Floats(1, 1, 1));
ScanlineRasterizer ras = new ScanlineRasterizer();
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
VertexSource.Ellipse e = new VertexSource.Ellipse();
// TODO: If you drag the control circles below the bottom of the window we get an exception. This does not happen in AGG.
// It needs to be debugged. Turning on clipping fixes it. But standard agg works without clipping. Could be a bigger problem than this.
//ras.clip_box(0, 0, width(), height());
// Render two "control" circles
e.init(m_x[0], m_y[0], 3, 3, 16);
ras.add_path(e);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.render_scanlines_aa_solid(clippingProxyNormal, ras, sl, new RGBA_Bytes(127, 127, 127));
e.init(m_x[1], m_y[1], 3, 3, 16);
ras.add_path(e);
scanlineRenderer.render_scanlines_aa_solid(clippingProxyNormal, ras, sl, new RGBA_Bytes(127, 127, 127));
double d = m_offset.Value;
// Creating a rounded rectangle
VertexSource.RoundedRect r = new VertexSource.RoundedRect(m_x[0] + d, m_y[0] + d, m_x[1] + d, m_y[1] + d, m_radius.Value);
r.normalize_radius();
// Drawing as an outline
if (!m_DrawAsOutlineCheckBox.Checked)
{
Stroke p = new Stroke(r);
p.width(1.0);
ras.add_path(p);
}
else
{
ras.add_path(r);
}
scanlineRenderer.render_scanlines_aa_solid(clippingProxyGamma, ras, sl, m_white_on_black.Checked ? new RGBA_Bytes(255, 255, 255) : new RGBA_Bytes(0, 0, 0));
base.OnDraw(graphics2D);
}
public override void OnDraw(Graphics2D graphics2D)
{
GammaLookUpTable gamma = new GammaLookUpTable(m_gamma.Value);
IRecieveBlenderByte NormalBlender = new BlenderBGRA();
IRecieveBlenderByte GammaBlender = new BlenderGammaBGRA(gamma);
ImageBuffer rasterNormal = new ImageBuffer(NewGraphics2D().DestImage, NormalBlender);
ImageBuffer rasterGamma = new ImageBuffer(NewGraphics2D().DestImage, GammaBlender);
ImageClippingProxy clippingProxyNormal = new ImageClippingProxy(rasterNormal);
ImageClippingProxy clippingProxyGamma = new ImageClippingProxy(rasterGamma);
clippingProxyNormal.clear(new ColorF(0, 0, 0));
ScanlineRasterizer ras = new ScanlineRasterizer();
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
VertexSource.Ellipse e = new VertexSource.Ellipse();
// TODO: If you drag the control circles below the bottom of the window we get an exception. This does not happen in AGG.
// It needs to be debugged. Turning on clipping fixes it. But standard agg works without clipping. Could be a bigger problem than this.
//ras.clip_box(0, 0, width(), height());
// Render two "control" circles
e.init(m_x[0], m_y[0], 3, 3, 16);
ras.add_path(e);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.RenderSolid(clippingProxyNormal, ras, sl, new Color(127, 127, 127));
e.init(m_x[1], m_y[1], 3, 3, 16);
ras.add_path(e);
scanlineRenderer.RenderSolid(clippingProxyNormal, ras, sl, new Color(127, 127, 127));
// Creating a rounded rectangle
VertexSource.RoundedRect r = new VertexSource.RoundedRect(m_x[0], m_y[0], m_x[1], m_y[1], 10);
r.normalize_radius();
// Drawing as an outline
Stroke p = new Stroke(r);
p.width(1.0);
ras.add_path(p);
//Renderer.RenderSolid(clippingProxyGamma, ras, sl, new RGBA_Bytes(0, 0, 0));
scanlineRenderer.RenderSolid(clippingProxyGamma, ras, sl, new Color(255, 1, 1));
/*
* int i;
*
* // radial line test
* //-------------------------
* dashed_line<rasterizer_type,
* renderer_scanline_type,
* scanline_type> dash(ras, ren_sl, sl);
*
* double cx = width() / 2.0;
* double cy = height() / 2.0;
*
* ren_sl.color(agg::rgba(1.0, 1.0, 1.0, 0.2));
* for(i = 180; i > 0; i--)
* {
* double n = 2.0 * agg::pi * i / 180.0;
* dash.draw(cx + min(cx, cy) * sin(n), cy + min(cx, cy) * cos(n),
* cx, cy,
* 1.0, (i < 90) ? i : 0.0);
* }
*
* typedef agg::gradient_x gradient_func_type;
* typedef agg::span_interpolator_linear<> interpolator_type;
* typedef agg::span_allocator<color_type> span_allocator_type;
* typedef agg::pod_auto_array<color_type, 256> color_array_type;
* typedef agg::span_gradient<color_type,
* interpolator_type,
* gradient_func_type,
* color_array_type> span_gradient_type;
*
* typedef agg::renderer_scanline_aa<renderer_base_type,
* span_allocator_type,
* span_gradient_type> renderer_gradient_type;
*
* gradient_func_type gradient_func; // The gradient function
* agg::trans_affine gradient_mtx; // Affine transformer
* interpolator_type span_interpolator(gradient_mtx); // Span interpolator
* span_allocator_type span_allocator; // Span Allocator
* color_array_type gradient_colors; // The gradient colors
* span_gradient_type span_gradient(span_interpolator,
* gradient_func,
* gradient_colors,
* 0, 100);
*
* renderer_gradient_type ren_gradient(ren_base, span_allocator, span_gradient);
*
* dashed_line<rasterizer_type,
* renderer_gradient_type,
* scanline_type> dash_gradient(ras, ren_gradient, sl);
*
* double x1, y1, x2, y2;
*
* for(i = 1; i <= 20; i++)
* {
* ren_sl.color(agg::rgba(1,1,1));
*
* // integral point sizes 1..20
* //----------------
* agg::ellipse ell;
*
* ell.init(20 + i * (i + 1) + 0.5,
* 20.5,
* i / 2.0,
* i / 2.0,
* 8 + i);
* ras.reset();
* ras.add_path(ell);
* agg::render_scanlines(ras, sl, ren_sl);
*
* // fractional point sizes 0..2
* //----------------
* ell.init(18 + i * 4 + 0.5, 33 + 0.5,
* i/20.0, i/20.0,
* 8);
* ras.reset();
* ras.add_path(ell);
* agg::render_scanlines(ras, sl, ren_sl);
*
* // fractional point positioning
* //---------------
* ell.init(18 + i * 4 + (i-1) / 10.0 + 0.5,
* 27 + (i - 1) / 10.0 + 0.5,
* 0.5, 0.5, 8);
* ras.reset();
* ras.add_path(ell);
* agg::render_scanlines(ras, sl, ren_sl);
*
* // integral line widths 1..20
* //----------------
* fill_color_array(gradient_colors,
* agg::rgba(1,1,1),
* agg::rgba(i % 2, (i % 3) * 0.5, (i % 5) * 0.25));
*
* x1 = 20 + i* (i + 1);
* y1 = 40.5;
* x2 = 20 + i * (i + 1) + (i - 1) * 4;
* y2 = 100.5;
* calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
* dash_gradient.draw(x1, y1, x2, y2, i, 0);
*
* fill_color_array(gradient_colors,
* agg::rgba(1,0,0),
* agg::rgba(0,0,1));
*
* // fractional line lengths H (red/blue)
* //----------------
* x1 = 17.5 + i * 4;
* y1 = 107;
* x2 = 17.5 + i * 4 + i/6.66666667;
* y2 = 107;
* calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
* dash_gradient.draw(x1, y1, x2, y2, 1.0, 0);
*
* // fractional line lengths V (red/blue)
* //---------------
* x1 = 18 + i * 4;
* y1 = 112.5;
* x2 = 18 + i * 4;
* y2 = 112.5 + i / 6.66666667;
* calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
* dash_gradient.draw(x1, y1, x2, y2, 1.0, 0);
*
* // fractional line positioning (red)
* //---------------
* fill_color_array(gradient_colors,
* agg::rgba(1,0,0),
* agg::rgba(1,1,1));
* x1 = 21.5;
* y1 = 120 + (i - 1) * 3.1;
* x2 = 52.5;
* y2 = 120 + (i - 1) * 3.1;
* calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
* dash_gradient.draw(x1, y1, x2, y2, 1.0, 0);
*
* // fractional line width 2..0 (green)
* fill_color_array(gradient_colors,
* agg::rgba(0,1,0),
* agg::rgba(1,1,1));
* x1 = 52.5;
* y1 = 118 + i * 3;
* x2 = 83.5;
* y2 = 118 + i * 3;
* calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
* dash_gradient.draw(x1, y1, x2, y2, 2.0 - (i - 1) / 10.0, 0);
*
* // stippled fractional width 2..0 (blue)
* fill_color_array(gradient_colors,
* agg::rgba(0,0,1),
* agg::rgba(1,1,1));
* x1 = 83.5;
* y1 = 119 + i * 3;
* x2 = 114.5;
* y2 = 119 + i * 3;
* calc_linear_gradient_transform(x1, y1, x2, y2, gradient_mtx);
* dash_gradient.draw(x1, y1, x2, y2, 2.0 - (i - 1) / 10.0, 3.0);
*
* ren_sl.color(agg::rgba(1,1,1));
* if(i <= 10)
* {
* // integral line width, horz aligned (mipmap test)
* //-------------------
* dash.draw(125.5, 119.5 + (i + 2) * (i / 2.0),
* 135.5, 119.5 + (i + 2) * (i / 2.0),
* i, 0.0);
* }
*
* // fractional line width 0..2, 1 px H
* //-----------------
* dash.draw(17.5 + i * 4, 192, 18.5 + i * 4, 192, i / 10.0, 0);
*
* // fractional line positioning, 1 px H
* //-----------------
* dash.draw(17.5 + i * 4 + (i - 1) / 10.0, 186,
* 18.5 + i * 4 + (i - 1) / 10.0, 186,
* 1.0, 0);
* }
*
* // Triangles
* //---------------
* for (int i = 1; i <= 13; i++)
* {
* fill_color_array(gradient_colors,
* agg::rgba(1,1,1),
* agg::rgba(i % 2, (i % 3) * 0.5, (i % 5) * 0.25));
* calc_linear_gradient_transform(width() - 150,
* height() - 20 - i * (i + 1.5),
* width() - 20,
* height() - 20 - i * (i + 1),
* gradient_mtx);
* ras.reset();
* ras.move_to_d(width() - 150, height() - 20 - i * (i + 1.5));
* ras.line_to_d(width() - 20, height() - 20 - i * (i + 1));
* ras.line_to_d(width() - 20, height() - 20 - i * (i + 2));
* agg::render_scanlines(ras, sl, ren_gradient);
* }
*/
base.OnDraw(graphics2D);
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
IImageByte backBuffer = widgetsSubImage;
if (!didInit)
{
didInit = true;
OnInitialize();
}
ImageBuffer image;
if (backBuffer.BitDepth == 32)
{
image = new ImageBuffer();
image.Attach(backBuffer, new BlenderBGRA());
}
else
{
if (backBuffer.BitDepth != 24)
{
throw new System.NotSupportedException();
}
image = new ImageBuffer();
image.Attach(backBuffer, new BlenderBGR());
}
ImageClippingProxy clippingProxy = new ImageClippingProxy(image);
clippingProxy.clear(new ColorF(1, 1, 1));
g_rasterizer.SetVectorClipBox(0, 0, Width, Height);
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
if (transformationTypeRadioButton.SelectedIndex == 0)
{
Bilinear tr = new Bilinear(lionShape.Bounds.Left, lionShape.Bounds.Bottom, lionShape.Bounds.Right, lionShape.Bounds.Top, quadPolygonControl.polygon());
if (tr.is_valid())
{
//--------------------------
// Render transformed lion
//
foreach (var shape in lionShape.Shapes)
{
g_rasterizer.add_path(new VertexSourceApplyTransform(shape.VertexStorage, tr));
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, shape.Color);
}
//--------------------------
//--------------------------
// Render transformed ellipse
//
VertexSource.Ellipse ell = new MatterHackers.Agg.VertexSource.Ellipse((lionShape.Bounds.Left + lionShape.Bounds.Right) * 0.5, (lionShape.Bounds.Bottom + lionShape.Bounds.Top) * 0.5,
(lionShape.Bounds.Right - lionShape.Bounds.Left) * 0.5, (lionShape.Bounds.Top - lionShape.Bounds.Bottom) * 0.5,
200);
Stroke ell_stroke = new Stroke(ell);
ell_stroke.width(3.0);
VertexSourceApplyTransform trans_ell = new VertexSourceApplyTransform(ell, tr);
VertexSourceApplyTransform trans_ell_stroke = new VertexSourceApplyTransform(ell_stroke, tr);
g_rasterizer.add_path(trans_ell);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new Color(0.5, 0.3, 0.0, 0.3));
g_rasterizer.add_path(trans_ell_stroke);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new Color(0.0, 0.3, 0.2, 1.0));
}
}
else
{
Perspective tr = new Perspective(lionShape.Bounds.Left, lionShape.Bounds.Bottom, lionShape.Bounds.Right, lionShape.Bounds.Top, quadPolygonControl.polygon());
if (tr.is_valid())
{
// Render transformed lion
foreach (var shape in lionShape.Shapes)
{
VertexSourceApplyTransform trans = new VertexSourceApplyTransform(shape.VertexStorage, tr);
g_rasterizer.reset();
g_rasterizer.add_path(trans);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, shape.Color);
}
// Render transformed ellipse
VertexSource.Ellipse FilledEllipse = new MatterHackers.Agg.VertexSource.Ellipse((lionShape.Bounds.Left + lionShape.Bounds.Right) * 0.5, (lionShape.Bounds.Bottom + lionShape.Bounds.Top) * 0.5,
(lionShape.Bounds.Right - lionShape.Bounds.Left) * 0.5, (lionShape.Bounds.Top - lionShape.Bounds.Bottom) * 0.5,
200);
Stroke EllipseOutline = new Stroke(FilledEllipse);
EllipseOutline.width(3.0);
VertexSourceApplyTransform TransformedFilledEllipse = new VertexSourceApplyTransform(FilledEllipse, tr);
VertexSourceApplyTransform TransformedEllipesOutline = new VertexSourceApplyTransform(EllipseOutline, tr);
g_rasterizer.add_path(TransformedFilledEllipse);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new Color(0.5, 0.3, 0.0, 0.3));
g_rasterizer.add_path(TransformedEllipesOutline);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new Color(0.0, 0.3, 0.2, 1.0));
}
}
//--------------------------
// Render the "quad" tool and controls
g_rasterizer.add_path(quadPolygonControl);
scanlineRenderer.RenderSolid(clippingProxy, g_rasterizer, g_scanline, new Color(0, 0.3, 0.5, 0.6));
//m_trans_type.Render(g_rasterizer, g_scanline, clippingProxy);
base.OnDraw(graphics2D);
}
private void CreateCircularBedGridImage(int linesInX, int linesInY)
{
Vector2 bedImageCentimeters = new Vector2(linesInX, linesInY);
BedImage = new ImageBuffer(1024, 1024, 32, new BlenderBGRA());
Graphics2D graphics2D = BedImage.NewGraphics2D();
graphics2D.Clear(bedBaseColor);
{
double lineDist = BedImage.Width / (double)linesInX;
int count = 1;
int pointSize = 16;
graphics2D.DrawString(count.ToString(), 4, 4, pointSize, color: bedMarkingsColor);
double currentRadius = lineDist;
Vector2 bedCenter = new Vector2(BedImage.Width / 2, BedImage.Height / 2);
for (double linePos = lineDist + BedImage.Width / 2; linePos < BedImage.Width; linePos += lineDist)
{
int linePosInt = (int)linePos;
graphics2D.DrawString(count.ToString(), linePos + 2, BedImage.Height / 2, pointSize, color: bedMarkingsColor);
Ellipse circle = new Ellipse(bedCenter, currentRadius);
Stroke outline = new Stroke(circle);
graphics2D.Render(outline, bedMarkingsColor);
currentRadius += lineDist;
count++;
}
graphics2D.Line(0, BedImage.Height / 2, BedImage.Width, BedImage.Height / 2, bedMarkingsColor);
graphics2D.Line(BedImage.Width / 2, 0, BedImage.Width / 2, BedImage.Height, bedMarkingsColor);
}
}
private void DrawCircle(Vector2 imagePosition, RGBA_Bytes color)
{
Ellipse circle = new Ellipse(imagePosition, 14);
graphics.Render(circle, color);
graphics.Render(new Stroke(circle), RGBA_Bytes.Black);
}
public override void Render(Graphics2D graphics2D, Affine transform, double layerScale, RenderType renderType)
{
if ((renderType & RenderType.Retractions) == RenderType.Retractions)
{
Vector2 position = new Vector2(this.position.x, this.position.y);
transform.transform(ref position);
double radius = Radius(layerScale);
Ellipse extrusion = new Ellipse(position, radius);
if (extrusionAmount > 0)
{
// unretraction
graphics2D.Render(extrusion, new RGBA_Bytes(RGBA_Bytes.Blue, 200));
}
else
{
// retraction
graphics2D.Render(extrusion, new RGBA_Bytes(RGBA_Bytes.Red, 200));
}
}
}
private void transform_image(double angle)
{
double width = m_TempDestImage.Width;
double height = m_TempDestImage.Height;
#if SourceDepthFloat
ImageClippingProxyFloat clippedDest = new ImageClippingProxyFloat(m_TempDestImage);
#else
ImageClippingProxy clippedDest = new ImageClippingProxy(m_TempDestImage);
#endif
clippedDest.clear(new ColorF(1.0, 1.0, 1.0));
Affine src_mtx = Affine.NewIdentity();
src_mtx *= Affine.NewTranslation(-width / 2.0, -height / 2.0);
src_mtx *= Affine.NewRotation(angle * Math.PI / 180.0);
src_mtx *= Affine.NewTranslation(width / 2.0, height / 2.0);
Affine img_mtx = new Affine(src_mtx);
img_mtx.invert();
double r = width;
if (height < r)
{
r = height;
}
r *= 0.5;
r -= 4.0;
VertexSource.Ellipse ell = new MatterHackers.Agg.VertexSource.Ellipse(width / 2.0, height / 2.0, r, r, 200);
VertexSourceApplyTransform tr = new VertexSourceApplyTransform(ell, src_mtx);
m_num_pix += r * r * Math.PI;
#if SourceDepthFloat
span_interpolator_linear_float interpolator = new span_interpolator_linear_float(img_mtx);
#else
span_interpolator_linear interpolator = new span_interpolator_linear(img_mtx);
#endif
ImageFilterLookUpTable filter = new ImageFilterLookUpTable();
bool norm = m_normalize.Checked;
#if SourceDepthFloat
ImageBufferAccessorClipFloat source = new ImageBufferAccessorClipFloat(m_RotatedImage, RGBA_Floats.rgba_pre(0, 0, 0, 0).ToColorF());
#else
ImageBufferAccessorClip source = new ImageBufferAccessorClip(m_RotatedImage, ColorF.rgba_pre(0, 0, 0, 0).ToColor());
#endif
IImageFilterFunction filterFunction = null;
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
switch (filterSelectionButtons.SelectedIndex)
{
case 0:
{
#if SourceDepthFloat
span_image_filter_float spanGenerator;
#else
span_image_filter spanGenerator;
#endif
switch (source.SourceImage.BitDepth)
{
case 24:
#if SourceDepthFloat
throw new NotImplementedException();
#else
spanGenerator = new span_image_filter_rgb_nn(source, interpolator);
#endif
break;
case 32:
#if SourceDepthFloat
throw new NotImplementedException();
#else
spanGenerator = new span_image_filter_rgba_nn(source, interpolator);
#endif
break;
default:
throw new NotImplementedException("only support 24 and 32 bit");
}
m_Rasterizer.add_path(tr);
scanlineRenderer.GenerateAndRender(m_Rasterizer, m_ScanlineUnpacked, clippedDest, m_SpanAllocator, spanGenerator);
}
break;
case 1:
{
#if SourceDepthFloat
span_image_filter_float spanGenerator;
#else
span_image_filter spanGenerator;
#endif
switch (source.SourceImage.BitDepth)
{
case 24:
#if SourceDepthFloat
throw new NotImplementedException();
#else
spanGenerator = new span_image_filter_rgb_bilinear(source, interpolator);
#endif
break;
case 32:
#if SourceDepthFloat
throw new NotImplementedException();
#else
spanGenerator = new span_image_filter_rgba_bilinear(source, interpolator);
#endif
break;
#if SourceDepthFloat
case 128:
spanGenerator = new span_image_filter_rgba_bilinear_float(source, interpolator);
break;
#endif
default:
throw new NotImplementedException("only support 24 and 32 bit");
}
m_Rasterizer.add_path(tr);
scanlineRenderer.GenerateAndRender(m_Rasterizer, m_ScanlineUnpacked, clippedDest, m_SpanAllocator, spanGenerator);
}
break;
case 5:
case 6:
case 7:
{
switch (filterSelectionButtons.SelectedIndex)
{
case 5: filter.calculate(new image_filter_hanning(), norm); break;
case 6: filter.calculate(new image_filter_hamming(), norm); break;
case 7: filter.calculate(new image_filter_hermite(), norm); break;
}
#if SourceDepthFloat
throw new NotImplementedException();
#else
span_image_filter_rgb_2x2 spanGenerator = new span_image_filter_rgb_2x2(source, interpolator, filter);
#endif
m_Rasterizer.add_path(tr);
#if SourceDepthFloat
throw new NotImplementedException();
#else
scanlineRenderer.GenerateAndRender(m_Rasterizer, m_ScanlineUnpacked, clippedDest, m_SpanAllocator, spanGenerator);
#endif
}
break;
case 2:
case 3:
case 4:
case 8:
case 9:
case 10:
case 11:
case 12:
case 13:
case 14:
case 15:
case 16:
{
switch (filterSelectionButtons.SelectedIndex)
{
case 2: filter.calculate(new image_filter_bicubic(), norm); break;
case 3: filter.calculate(new image_filter_spline16(), norm); break;
case 4: filter.calculate(new image_filter_spline36(), norm); break;
case 8: filter.calculate(new image_filter_kaiser(), norm); break;
case 9: filter.calculate(new image_filter_quadric(), norm); break;
case 10: filter.calculate(new image_filter_catrom(), norm); break;
case 11: filter.calculate(new image_filter_gaussian(), norm); break;
case 12: filter.calculate(new image_filter_bessel(), norm); break;
case 13: filter.calculate(new image_filter_mitchell(), norm); break;
case 14: filter.calculate(new image_filter_sinc(m_radius.Value), norm); break;
case 15: filter.calculate(new image_filter_lanczos(m_radius.Value), norm); break;
case 16:
filterFunction = new image_filter_blackman(m_radius.Value);
//filterFunction = new image_filter_bilinear();
filter.calculate(filterFunction, norm);
break;
}
#if SourceDepthFloat
span_image_filter_float spanGenerator;
#else
span_image_filter spanGenerator;
#endif
switch (source.SourceImage.BitDepth)
{
case 24:
#if SourceDepthFloat
throw new NotImplementedException();
#else
spanGenerator = new span_image_filter_rgb(source, interpolator, filter);
#endif
break;
case 32:
#if SourceDepthFloat
throw new NotImplementedException();
#else
spanGenerator = new span_image_filter_rgba(source, interpolator, filter);
#endif
break;
#if SourceDepthFloat
case 128:
spanGenerator = new span_image_filter_rgba_float(source, interpolator, filterFunction);
break;
#endif
default:
throw new NotImplementedException("only support 24 and 32 bit");
}
m_Rasterizer.add_path(tr);
scanlineRenderer.GenerateAndRender(m_Rasterizer, m_ScanlineUnpacked, clippedDest, m_SpanAllocator, spanGenerator);
}
break;
}
}
//圆形
public static CCSprite CreateEllipse(
double width, double height,
CCColor4B fill, CCColor4B stroke,
double strokeThickness = 1
)
{
ImageBuffer buffer = new ImageBuffer((int)width, (int)height, 32, new BlenderRGBA());
Graphics2D g = buffer.NewGraphics2D();
MatterHackers.Agg.VertexSource.Ellipse path;
if (stroke.A > 0) //有border
{
//border是以线的中间对齐，所以转换成int，如果是1个像素，正好变成零
int halfThickness = (int)(strokeThickness / 2);
path = new MatterHackers.Agg.VertexSource.Ellipse(width / 2, height / 2, width / 2 - halfThickness, height / 2 - halfThickness);
}
else
{
path = new MatterHackers.Agg.VertexSource.Ellipse(width / 2, height / 2, width / 2, height / 2);
}
if (fill.A > 0) g.Render(path, new RGBA_Bytes(fill.R, fill.G, fill.B, fill.A));
if (stroke.A > 0) g.Render(new Stroke(path, strokeThickness), new RGBA_Bytes(stroke.R, stroke.G, stroke.B, stroke.A));
Texture2D xnaTexture = XnaTexture((int)width, (int)height);
xnaTexture.SetData<byte>(buffer.GetBuffer());
CCTexture2D ccTexture = new CCTexture2D();
ccTexture.InitWithTexture(xnaTexture);
return new CCSprite(ccTexture);
}
public override void OnDraw(Graphics2D graphics2D)
{
ImageBuffer widgetsSubImage = ImageBuffer.NewSubImageReference(graphics2D.DestImage, graphics2D.GetClippingRect());
if (orignialSize.x == 0)
{
orignialSize.x = WindowSize.x;
orignialSize.y = WindowSize.y;
}
ImageBuffer destImageWithPreMultBlender = new ImageBuffer();
switch (widgetsSubImage.BitDepth)
{
case 24:
destImageWithPreMultBlender.Attach(widgetsSubImage, new BlenderPreMultBGR());
break;
case 32:
destImageWithPreMultBlender.Attach(widgetsSubImage, new BlenderPreMultBGRA());
break;
default:
throw new Exception("Unknown bit depth");
}
ImageClippingProxy clippingProxy_pre = new ImageClippingProxy(destImageWithPreMultBlender);
clippingProxy_pre.clear(new RGBA_Floats(1.0, 1.0, 1.0));
Affine src_mtx = Affine.NewIdentity();
src_mtx *= Affine.NewTranslation(-orignialSize.x / 2 - 10, -orignialSize.y / 2 - 20 - 10);
src_mtx *= Affine.NewRotation(drawAngle.Value * Math.PI / 180.0);
src_mtx *= Affine.NewScaling(drawScale.Value);
src_mtx *= Affine.NewTranslation(orignialSize.x / 2, orignialSize.y / 2 + 20);
Affine img_mtx = Affine.NewIdentity();
img_mtx *= Affine.NewTranslation(-orignialSize.x / 2 + 10, -orignialSize.y / 2 + 20 + 10);
img_mtx *= Affine.NewRotation(drawAngle.Value * Math.PI / 180.0);
img_mtx *= Affine.NewScaling(drawScale.Value);
img_mtx *= Affine.NewTranslation(orignialSize.x / 2, orignialSize.y / 2 + 20);
img_mtx.invert();
MatterHackers.Agg.span_allocator sa = new span_allocator();
span_interpolator_linear interpolator = new span_interpolator_linear(img_mtx);
span_image_filter sg;
switch (sourceImage.BitDepth)
{
case 24:
{
ImageBufferAccessorClip source = new ImageBufferAccessorClip(sourceImage, RGBA_Floats.rgba_pre(0, 0, 0, 0).GetAsRGBA_Bytes());
sg = new span_image_filter_rgb_bilinear_clip(source, RGBA_Floats.rgba_pre(0, 0.4, 0, 0.5), interpolator);
}
break;
case 32:
{
ImageBufferAccessorClip source = new ImageBufferAccessorClip(sourceImage, RGBA_Floats.rgba_pre(0, 0, 0, 0).GetAsRGBA_Bytes());
sg = new span_image_filter_rgba_bilinear_clip(source, RGBA_Floats.rgba_pre(0, 0.4, 0, 0.5), interpolator);
}
break;
default:
throw new Exception("Bad sourc depth");
}
ScanlineRasterizer ras = new ScanlineRasterizer();
ras.SetVectorClipBox(0, 0, Width, Height);
ScanlineCachePacked8 sl = new ScanlineCachePacked8();
//scanline_unpacked_8 sl = new scanline_unpacked_8();
double r = orignialSize.x;
if (orignialSize.y - 60 < r)
{
r = orignialSize.y - 60;
}
VertexSource.Ellipse ell = new VertexSource.Ellipse(orignialSize.x / 2.0 + 10,
orignialSize.y / 2.0 + 20 + 10,
r / 2.0 + 16.0,
r / 2.0 + 16.0, 200);
VertexSourceApplyTransform tr = new VertexSourceApplyTransform(ell, src_mtx);
ras.add_path(tr);
//clippingProxy_pre.SetClippingBox(30, 0, (int)width(), (int)height());
ScanlineRenderer scanlineRenderer = new ScanlineRenderer();
scanlineRenderer.GenerateAndRender(ras, sl, clippingProxy_pre, sa, sg);
if (false) // this is test code to check different quality settings for scalling
{
Vector2 screenCenter = new Vector2(Width / 2, Height / 2);
Vector2 deltaToMouse = mousePosition - screenCenter;
double angleToMouse = Math.Atan2(deltaToMouse.y, deltaToMouse.x);
double diagonalSize = Math.Sqrt(sourceImage.Width * sourceImage.Width + sourceImage.Height * sourceImage.Height);
double distToMouse = deltaToMouse.Length;
double scalling = distToMouse / diagonalSize;
graphics2D.Render(sourceImage, Width / 2, Height / 2, angleToMouse - MathHelper.Tau / 8, scalling, scalling);
}
base.OnDraw(graphics2D);
}
//圆形
public UIGraphic AddEllipse(double x, double y, double width, double height, CCColor4B fill, CCColor4B stroke, double strokeThickness = 1)
{
IVertexSource path;
if (stroke.A > 0) //有border
{
//border是以线的中间对齐，所以转换成int，如果是1个像素变成1
int halfThickness = (int)((strokeThickness + 1) / 2);
path = new MatterHackers.Agg.VertexSource.Ellipse(width / 2, height / 2, width / 2 - halfThickness, height / 2 - halfThickness);
}
else
{
path = new MatterHackers.Agg.VertexSource.Ellipse(width / 2, height / 2, width / 2, height / 2);
}
if (x != 0 || y != 0)
path = new VertexSourceApplyTransform(path, Affine.NewTranslation(x, y));
if (fill.A > 0) this.graphics2D.Render(path, new RGBA_Bytes(fill.R, fill.G, fill.B, fill.A));
if (stroke.A > 0) this.graphics2D.Render(new Stroke(path, strokeThickness), new RGBA_Bytes(stroke.R, stroke.G, stroke.B, stroke.A));
return this;
}
public static void Main(string[] args)
{
// first we will show how to use the simple drawing functions in graphics 2D
{
ImageBuffer simpleImage = new ImageBuffer(640, 480, 32, new BlenderBGRA());
Graphics2D simpleImageGraphics2D = simpleImage.NewGraphics2D();
// clear the image to white
simpleImageGraphics2D.Clear(RGBA_Bytes.White);
// draw a circle
simpleImageGraphics2D.Circle(50, 50, 30, RGBA_Bytes.Blue);
// draw a line
simpleImageGraphics2D.Line(10, 100, 520, 50, new RGBA_Bytes(20, 200, 200));
// draw a filled box
simpleImageGraphics2D.FillRectangle(60, 260, 200, 280, RGBA_Bytes.Yellow);
// and an outline around it
simpleImageGraphics2D.Rectangle(60, 260, 200, 280, RGBA_Bytes.Magenta);
// draw some text
simpleImageGraphics2D.DrawString("A Simple Example", 300, 400, 20);
// and save this image out
ImageTgaIO.Save(simpleImage, "SimpleDrawAndSave.tga");
}
// now we will we will show how to use the render function to draw more complex things
{
ImageBuffer lessSimpleImage = new ImageBuffer(640, 480, 32, new BlenderBGRA());
Graphics2D lessSimpleImageGraphics2D = lessSimpleImage.NewGraphics2D();
// clear the image to white
lessSimpleImageGraphics2D.Clear(RGBA_Bytes.White);
// draw a circle
Ellipse ellipseTest = new Ellipse(0, 0, 100, 50);
for (double angleDegrees = 0; angleDegrees < 180; angleDegrees += 22.5)
{
VertexSourceApplyTransform rotatedTransform = new VertexSourceApplyTransform(ellipseTest, Affine.NewRotation(MathHelper.DegreesToRadians(angleDegrees)));
VertexSourceApplyTransform rotatedAndTranslatedTransform = new VertexSourceApplyTransform(rotatedTransform, Affine.NewTranslation(lessSimpleImage.Width / 2, 150));
lessSimpleImageGraphics2D.Render(rotatedAndTranslatedTransform, RGBA_Bytes.Yellow);
Stroke ellipseOutline = new Stroke(rotatedAndTranslatedTransform, 3);
lessSimpleImageGraphics2D.Render(ellipseOutline, RGBA_Bytes.Blue);
}
// and a little polygon
PathStorage littlePoly = new PathStorage();
littlePoly.MoveTo(50, 50);
littlePoly.LineTo(150, 50);
littlePoly.LineTo(200, 200);
littlePoly.LineTo(50, 150);
littlePoly.LineTo(50, 50);
lessSimpleImageGraphics2D.Render(littlePoly, RGBA_Bytes.Cyan);
// draw some text
TypeFacePrinter textPrinter = new TypeFacePrinter("Printing from a printer", 30, justification: Justification.Center);
IVertexSource translatedText = new VertexSourceApplyTransform(textPrinter, Affine.NewTranslation(new Vector2(lessSimpleImage.Width / 2, lessSimpleImage.Height / 4 * 3)));
lessSimpleImageGraphics2D.Render(translatedText, RGBA_Bytes.Red);
Stroke strokedText = new Stroke(translatedText);
lessSimpleImageGraphics2D.Render(strokedText, RGBA_Bytes.Black);
IVertexSource rotatedText = new VertexSourceApplyTransform(textPrinter, Affine.NewRotation(MathHelper.DegreesToRadians(90)));
IVertexSource rotatedTranslatedText = new VertexSourceApplyTransform(rotatedText, Affine.NewTranslation(new Vector2(40, lessSimpleImage.Height / 2)));
lessSimpleImageGraphics2D.Render(rotatedTranslatedText, RGBA_Bytes.Black);
// and save this image out
ImageTgaIO.Save(lessSimpleImage, "LessSimpleDrawAndSave.tga");
}
}
public override void Render(Graphics2D graphics2D, GCodeRenderInfo renderInfo)
{
if ((renderInfo.CurrentRenderType & RenderType.Retractions) == RenderType.Retractions)
{
double radius = Radius(renderInfo.LayerScale);
Vector2 position = new Vector2(this.position.x, this.position.y);
renderInfo.Transform.transform(ref position);
RGBA_Bytes retractionColor = new RGBA_Bytes(RGBA_Bytes.Red, 200);
if (extrusionAmount > 0)
{
// unretraction
retractionColor = new RGBA_Bytes(RGBA_Bytes.Blue, 200);
}
// render the part using opengl
Graphics2DOpenGL graphics2DGl = graphics2D as Graphics2DOpenGL;
if (graphics2DGl != null)
{
graphics2DGl.DrawAACircle(position, radius, retractionColor);
}
else
{
Ellipse extrusion = new Ellipse(position, radius);
graphics2D.Render(extrusion, retractionColor);
}
}
}
