public MenuPage()
: base("Menu Controls")
{
//GuiWidget.DebugBoundsUnderMouse = true;
BackgroundColor = RGBA_Bytes.Green;
lastAction = new TextWidget("Last Menu Action");
lastAction.OriginRelativeParent = new Vector2(100, 250);
AddChild(lastAction);
Menu dropListMenu = new Menu(new TextWidget("gAction v"));
dropListMenu.Name = "ListMenu Down";
AddMenu(dropListMenu, "Walk");
AddMenu(dropListMenu, "Jog");
AddMenu(dropListMenu, "Run");
dropListMenu.OriginRelativeParent = new Vector2(100, 200);
AddChild(dropListMenu);
Menu longMenue = new Menu(new TextWidget("very long"), maxHeight: 50);
longMenue.Name = "ListMenu Down";
for (int i = 0; i < 30; i++)
{
AddMenu(longMenue, "menu {0}".FormatWith(i));
}
longMenue.OriginRelativeParent = new Vector2(100, 300);
AddChild(longMenue);
Menu raiseListMenu = new Menu(new TextWidget("jAction ^"), Direction.Up);
raiseListMenu.Name = "ListMenu Up";
AddMenu(raiseListMenu, "Walk");
AddMenu(raiseListMenu, "Jog");
AddMenu(raiseListMenu, "Run");
raiseListMenu.OriginRelativeParent = new Vector2(200, 200);
AddChild(raiseListMenu);
MenuBar mainMenu = new MenuBar();
mainMenu.VAnchor = UI.VAnchor.ParentTop;
PopupMenu popupMenu = new PopupMenu(new TextWidget("Simple Menu"));
popupMenu.OriginRelativeParent = new Vector2(100, 100);
//AddChild(popupMenu);
DropDownList dropDownList = new DropDownList("- Select Something -", RGBA_Bytes.Black, RGBA_Bytes.Gray);
dropDownList.BackgroundColor = RGBA_Bytes.Black;
dropDownList.TextColor = RGBA_Bytes.White;
dropDownList.MenuItemsPadding = new BorderDouble(13);
dropDownList.MenuItemsBorderWidth = 3;
dropDownList.MenuItemsBorderColor = RGBA_Bytes.Red;
dropDownList.MenuItemsBackgroundColor = RGBA_Bytes.Blue;
dropDownList.MenuItemsTextColor = RGBA_Bytes.White;
dropDownList.MenuItemsTextHoverColor = RGBA_Bytes.Yellow;
dropDownList.Name = "Drop Down List";
dropDownList.AddItem("Item 1", "value1");
dropDownList.AddItem("Item 2 long name");
dropDownList.AddItem("Item 3 realy long name");
dropDownList.OriginRelativeParent = new Vector2(300, 200);
AddChild(dropDownList);
}
private void AddGridSnapSettings(GuiWidget widgetToAddTo)
{
FlowLayoutWidget container = new FlowLayoutWidget()
{
Margin = new BorderDouble(5, 0),
};
TextWidget snapGridLabel = new TextWidget("Snap Grid".Localize())
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(3, 0, 0, 0),
};
container.AddChild(snapGridLabel);
DropDownList selectableOptions = new DropDownList("Custom", Direction.Up)
{
VAnchor = VAnchor.ParentCenter | VAnchor.FitToChildren,
};
Dictionary<double, string> snapSettings = new Dictionary<double, string>()
{
{ 0, "Off" },
{ .1, "0.1" },
{ .25, "0.25" },
{ .5, "0.5" },
{ 1, "1" },
{ 2, "2" },
{ 5, "5" },
};
foreach (KeyValuePair<double, string> snapSetting in snapSettings)
{
double valueLocal = snapSetting.Key;
MenuItem newItem = selectableOptions.AddItem(snapSetting.Value);
if (meshViewerWidget.SnapGridDistance == valueLocal)
{
selectableOptions.SelectedLabel = snapSetting.Value;
}
newItem.Selected += (sender, e) =>
{
meshViewerWidget.SnapGridDistance = snapSetting.Key;
};
}
container.AddChild(selectableOptions);
widgetToAddTo.AddChild(container);
}
private FlowLayoutWidget GetThumbnailRenderingControl()
{
FlowLayoutWidget buttonRow = new FlowLayoutWidget();
buttonRow.HAnchor = HAnchor.ParentLeftRight;
buttonRow.Margin = new BorderDouble(top: 4);
TextWidget settingsLabel = new TextWidget("Thumbnail Rendering".Localize());
settingsLabel.AutoExpandBoundsToText = true;
settingsLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
settingsLabel.VAnchor = VAnchor.ParentTop;
FlowLayoutWidget optionsContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
optionsContainer.Margin = new BorderDouble(bottom: 6);
DropDownList interfaceOptionsDropList = new DropDownList("Development", maxHeight: 200);
interfaceOptionsDropList.HAnchor = HAnchor.ParentLeftRight;
optionsContainer.AddChild(interfaceOptionsDropList);
optionsContainer.Width = 200;
interfaceOptionsDropList.AddItem("Flat".Localize(), "orthographic");
interfaceOptionsDropList.AddItem("3D".Localize(), "raytraced");
List<string> acceptableUpdateFeedTypeValues = new List<string>() { "orthographic", "raytraced" };
string currentThumbnailRenderingMode = UserSettings.Instance.get(UserSettingsKey.ThumbnailRenderingMode);
if (acceptableUpdateFeedTypeValues.IndexOf(currentThumbnailRenderingMode) == -1)
{
#if __ANDROID__
UserSettings.Instance.set(UserSettingsKey.ThumbnailRenderingMode, "orthographic");
#else
UserSettings.Instance.set(UserSettingsKey.ThumbnailRenderingMode, "raytraced");
#endif
}
interfaceOptionsDropList.SelectedValue = UserSettings.Instance.get(UserSettingsKey.ThumbnailRenderingMode);
interfaceOptionsDropList.SelectionChanged += (sender, e) =>
{
string thumbnailRenderingMode = ((DropDownList)sender).SelectedValue;
if (thumbnailRenderingMode != UserSettings.Instance.get(UserSettingsKey.ThumbnailRenderingMode))
{
UserSettings.Instance.set(UserSettingsKey.ThumbnailRenderingMode, thumbnailRenderingMode);
// Ask if the user would like to rebuild all their thumbnails
Action<bool> removeThumbnails = (bool shouldRebuildThumbnails) =>
{
if (shouldRebuildThumbnails)
{
string directoryToRemove = PartThumbnailWidget.ThumbnailPath();
try
{
if (Directory.Exists(directoryToRemove))
{
Directory.Delete(directoryToRemove, true);
}
}
catch (Exception)
{
GuiWidget.BreakInDebugger();
}
}
ApplicationController.Instance.ReloadAll(null, null);
};
UiThread.RunOnIdle(() =>
{
StyledMessageBox.ShowMessageBox(removeThumbnails, rebuildThumbnailsMessage, rebuildThumbnailsTitle, StyledMessageBox.MessageType.YES_NO, "Rebuild".Localize());
});
}
};
buttonRow.AddChild(settingsLabel);
buttonRow.AddChild(new HorizontalSpacer());
buttonRow.AddChild(optionsContainer);
return buttonRow;
}
private FlowLayoutWidget GetUpdateControl()
{
FlowLayoutWidget buttonRow = new FlowLayoutWidget();
buttonRow.HAnchor = HAnchor.ParentLeftRight;
buttonRow.Margin = new BorderDouble(top: 4);
configureUpdateFeedButton = textImageButtonFactory.Generate("Configure".Localize().ToUpper());
configureUpdateFeedButton.Margin = new BorderDouble(left: 6);
configureUpdateFeedButton.VAnchor = VAnchor.ParentCenter;
TextWidget settingsLabel = new TextWidget("Update Notification Feed".Localize());
settingsLabel.AutoExpandBoundsToText = true;
settingsLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
settingsLabel.VAnchor = VAnchor.ParentTop;
FlowLayoutWidget optionsContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
optionsContainer.Margin = new BorderDouble(bottom: 6);
releaseOptionsDropList = new DropDownList("Development", maxHeight: 200);
releaseOptionsDropList.HAnchor = HAnchor.ParentLeftRight;
optionsContainer.AddChild(releaseOptionsDropList);
optionsContainer.Width = 200;
MenuItem releaseOptionsDropDownItem = releaseOptionsDropList.AddItem("Stable".Localize(), "release");
releaseOptionsDropDownItem.Selected += new EventHandler(FixTabDot);
MenuItem preReleaseDropDownItem = releaseOptionsDropList.AddItem("Beta".Localize(), "pre-release");
preReleaseDropDownItem.Selected += new EventHandler(FixTabDot);
MenuItem developmentDropDownItem = releaseOptionsDropList.AddItem("Alpha".Localize(), "development");
developmentDropDownItem.Selected += new EventHandler(FixTabDot);
List<string> acceptableUpdateFeedTypeValues = new List<string>() { "release", "pre-release", "development" };
string currentUpdateFeedType = UserSettings.Instance.get(UserSettingsKey.UpdateFeedType);
if (acceptableUpdateFeedTypeValues.IndexOf(currentUpdateFeedType) == -1)
{
UserSettings.Instance.set(UserSettingsKey.UpdateFeedType, "release");
}
releaseOptionsDropList.SelectedValue = UserSettings.Instance.get(UserSettingsKey.UpdateFeedType);
releaseOptionsDropList.SelectionChanged += new EventHandler(ReleaseOptionsDropList_SelectionChanged);
buttonRow.AddChild(settingsLabel);
buttonRow.AddChild(new HorizontalSpacer());
buttonRow.AddChild(optionsContainer);
return buttonRow;
}
private FlowLayoutWidget GetModeControl()
{
FlowLayoutWidget buttonRow = new FlowLayoutWidget();
buttonRow.HAnchor = HAnchor.ParentLeftRight;
buttonRow.Margin = new BorderDouble(top: 4);
TextWidget settingsLabel = new TextWidget("Interface Mode".Localize());
settingsLabel.AutoExpandBoundsToText = true;
settingsLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
settingsLabel.VAnchor = VAnchor.ParentTop;
FlowLayoutWidget optionsContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
optionsContainer.Margin = new BorderDouble(bottom: 6);
DropDownList interfaceModeDropList = new DropDownList("Standard", maxHeight: 200);
interfaceModeDropList.HAnchor = HAnchor.ParentLeftRight;
optionsContainer.AddChild(interfaceModeDropList);
optionsContainer.Width = 200;
MenuItem standardModeDropDownItem = interfaceModeDropList.AddItem("Standard".Localize(), "True");
MenuItem advancedModeDropDownItem = interfaceModeDropList.AddItem("Advanced".Localize(), "False");
interfaceModeDropList.SelectedValue = UserSettings.Instance.Fields.IsSimpleMode.ToString();
interfaceModeDropList.SelectionChanged += new EventHandler(InterfaceModeDropList_SelectionChanged);
buttonRow.AddChild(settingsLabel);
buttonRow.AddChild(new HorizontalSpacer());
buttonRow.AddChild(optionsContainer);
return buttonRow;
}
private FlowLayoutWidget GetDisplayControl()
{
FlowLayoutWidget buttonRow = new FlowLayoutWidget();
buttonRow.HAnchor = HAnchor.ParentLeftRight;
buttonRow.Margin = new BorderDouble(top: 4);
TextWidget settingsLabel = new TextWidget("Display Mode".Localize());
settingsLabel.AutoExpandBoundsToText = true;
settingsLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
settingsLabel.VAnchor = VAnchor.ParentTop;
Button displayControlRestartButton = textImageButtonFactory.Generate("Restart");
displayControlRestartButton.VAnchor = Agg.UI.VAnchor.ParentCenter;
displayControlRestartButton.Visible = false;
displayControlRestartButton.Margin = new BorderDouble(right: 6);
displayControlRestartButton.Click += (sender, e) =>
{
if (PrinterConnectionAndCommunication.Instance.PrinterIsPrinting)
{
StyledMessageBox.ShowMessageBox(null, cannotRestartWhilePrintIsActiveMessage, cannotRestartWhileActive);
}
else
{
RestartApplication();
}
};
FlowLayoutWidget optionsContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
optionsContainer.Margin = new BorderDouble(bottom: 6);
DropDownList interfaceOptionsDropList = new DropDownList("Development", maxHeight: 200);
interfaceOptionsDropList.HAnchor = HAnchor.ParentLeftRight;
optionsContainer.AddChild(interfaceOptionsDropList);
optionsContainer.Width = 200;
MenuItem responsizeOptionsDropDownItem = interfaceOptionsDropList.AddItem("Normal".Localize(), "responsive");
MenuItem touchscreenOptionsDropDownItem = interfaceOptionsDropList.AddItem("Touchscreen".Localize(), "touchscreen");
List<string> acceptableUpdateFeedTypeValues = new List<string>() { "responsive", "touchscreen" };
string currentDisplayModeType = UserSettings.Instance.get(UserSettingsKey.ApplicationDisplayMode);
if (acceptableUpdateFeedTypeValues.IndexOf(currentDisplayModeType) == -1)
{
UserSettings.Instance.set(UserSettingsKey.ApplicationDisplayMode, "responsive");
}
interfaceOptionsDropList.SelectedValue = UserSettings.Instance.get(UserSettingsKey.ApplicationDisplayMode);
interfaceOptionsDropList.SelectionChanged += (sender, e) =>
{
string releaseCode = ((DropDownList)sender).SelectedValue;
if (releaseCode != UserSettings.Instance.get(UserSettingsKey.ApplicationDisplayMode))
{
UserSettings.Instance.set(UserSettingsKey.ApplicationDisplayMode, releaseCode);
displayControlRestartButton.Visible = true;
}
};
buttonRow.AddChild(settingsLabel);
buttonRow.AddChild(new HorizontalSpacer());
buttonRow.AddChild(displayControlRestartButton);
buttonRow.AddChild(optionsContainer);
return buttonRow;
}
public CheckForUpdateWindow()
: base (540, 350)
{
linkButtonFactory.fontSize = 10;
linkButtonFactory.textColor = ActiveTheme.Instance.SecondaryAccentColor;
FlowLayoutWidget topToBottom = new FlowLayoutWidget(FlowDirection.TopToBottom);
topToBottom.AnchorAll();
topToBottom.BackgroundColor = ActiveTheme.Instance.SecondaryBackgroundColor;
Padding = new BorderDouble(left: 5, right: 5);
FlowLayoutWidget mainLabelContainer = new FlowLayoutWidget(FlowDirection.LeftToRight);
mainLabelContainer.BackgroundColor = ActiveTheme.Instance.PrimaryBackgroundColor;
mainLabelContainer.VAnchor = VAnchor.FitToChildren;
mainLabelContainer.HAnchor = HAnchor.ParentLeftRight;
FlowLayoutWidget currentFeedAndDropDownContainer = new FlowLayoutWidget(FlowDirection.LeftToRight);
currentFeedAndDropDownContainer.VAnchor = VAnchor.FitToChildren;
currentFeedAndDropDownContainer.HAnchor = HAnchor.ParentLeftRight;
currentFeedAndDropDownContainer.Margin = new BorderDouble(0,5,0,0);
currentFeedAndDropDownContainer.BackgroundColor = ActiveTheme.Instance.SecondaryBackgroundColor;
TextWidget checkUpdateLabel = new TextWidget("Check for Update".Localize(), pointSize: 20);
if (UpdateControlData.Instance.UpdateRequired)
{
checkUpdateLabel = new TextWidget("Update Required".Localize(), pointSize: 20);
}
checkUpdateLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
checkUpdateLabel.Margin = new BorderDouble(2, 10, 10, 5);
UpdateControlView updateStatusWidget = new UpdateControlView();
String fullCurrentFeedLabel = "Update Channel".Localize();
TextWidget feedLabel = new TextWidget(fullCurrentFeedLabel, pointSize: 12);
feedLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
feedLabel.VAnchor = VAnchor.ParentCenter;
feedLabel.Margin = new BorderDouble(left: 5);
releaseOptionsDropList = new DropDownList("Development", maxHeight: 200);
releaseOptionsDropList.HAnchor = HAnchor.ParentLeftRight;
MenuItem releaseOptionsDropDownItem = releaseOptionsDropList.AddItem("Stable".Localize(), "release");
releaseOptionsDropDownItem.Selected += new EventHandler(FixTabDot);
MenuItem preReleaseDropDownItem = releaseOptionsDropList.AddItem("Beta".Localize(), "pre-release");
preReleaseDropDownItem.Selected += new EventHandler(FixTabDot);
MenuItem developmentDropDownItem = releaseOptionsDropList.AddItem("Alpha".Localize(), "development");
developmentDropDownItem.Selected += new EventHandler(FixTabDot);
List<string> acceptableUpdateFeedTypeValues = new List<string>() { "release", "pre-release", "development" };
string currentUpdateFeedType = UserSettings.Instance.get(UserSettingsKey.UpdateFeedType);
if (acceptableUpdateFeedTypeValues.IndexOf(currentUpdateFeedType) == -1)
{
UserSettings.Instance.set(UserSettingsKey.UpdateFeedType, "release");
}
releaseOptionsDropList.SelectedValue = UserSettings.Instance.get(UserSettingsKey.UpdateFeedType);
releaseOptionsDropList.SelectionChanged += new EventHandler(ReleaseOptionsDropList_SelectionChanged);
string currentBuildNo = VersionInfo.Instance.BuildVersion;
string currentBuildInfoLabel = String.Format("Current Build : {0}", currentBuildNo);
currentBuildInfo = new TextWidget(currentBuildInfoLabel.Localize());
currentBuildInfo.HAnchor = HAnchor.ParentLeftRight;
currentBuildInfo.Margin = new BorderDouble(left: 5,bottom: 15, top: 20);
currentBuildInfo.TextColor = ActiveTheme.Instance.PrimaryTextColor;
FlowLayoutWidget additionalInfoContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
additionalInfoContainer.BackgroundColor = ActiveTheme.Instance.SecondaryBackgroundColor;
additionalInfoContainer.HAnchor = HAnchor.ParentLeftRight;
additionalInfoContainer.Padding = new BorderDouble(left: 6, top: 6);
string aboutUpdateChannel = "Changing your update channel will change the version of MatterControl \nthat you receive when updating:";
updateChannelLabel = new TextWidget(aboutUpdateChannel);
updateChannelLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
updateChannelLabel.HAnchor = HAnchor.ParentLeftRight;
updateChannelLabel.Margin = new BorderDouble(bottom: 20);
additionalInfoContainer.AddChild(updateChannelLabel);
string stableFeedInfoText = "Stable: The current release version of MatterControl (recommended).".Localize();
stableInfoLabel = new TextWidget(stableFeedInfoText);
stableInfoLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
stableInfoLabel.HAnchor = HAnchor.ParentLeftRight;
stableInfoLabel.Margin = new BorderDouble(bottom:10);
additionalInfoContainer.AddChild(stableInfoLabel);
string betaFeedInfoText = "Beta: The release candidate version of MatterControl.".Localize();
betaInfoLabel = new TextWidget(betaFeedInfoText);
betaInfoLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
betaInfoLabel.HAnchor = HAnchor.ParentLeftRight;
betaInfoLabel.Margin = new BorderDouble(bottom: 10);
additionalInfoContainer.AddChild(betaInfoLabel);
string alphaFeedInfoText = "Alpha: The in development version of MatterControl.".Localize();
alphaInfoLabel = new TextWidget(alphaFeedInfoText);
alphaInfoLabel.TextColor = ActiveTheme.Instance.PrimaryTextColor;
alphaInfoLabel.HAnchor = HAnchor.ParentLeftRight;
alphaInfoLabel.Margin = new BorderDouble(bottom: 10);
additionalInfoContainer.AddChild(alphaInfoLabel);
FlowLayoutWidget buttonContainer = new FlowLayoutWidget(FlowDirection.LeftToRight);
buttonContainer.HAnchor = HAnchor.ParentLeftRight;
buttonContainer.BackgroundColor = ActiveTheme.Instance.PrimaryBackgroundColor;
Button closeButton = textImageButtonFactory.Generate("Close".Localize(), centerText: true);
closeButton.Click += (sender, e) =>
{
CloseOnIdle();
};
Button whatsThisLink = linkButtonFactory.Generate("What's this?".Localize());
whatsThisLink.VAnchor = VAnchor.ParentCenter;
whatsThisLink.Margin = new BorderDouble(left: 6);
whatsThisLink.Click += (sender, e) =>
{
UiThread.RunOnIdle(() =>
{
if (!additionalInfoContainer.Visible)
{
additionalInfoContainer.Visible = true;
}
else
{
additionalInfoContainer.Visible = false;
}
});
};
mainLabelContainer.AddChild(checkUpdateLabel);
topToBottom.AddChild(mainLabelContainer);
topToBottom.AddChild(updateStatusWidget);
topToBottom.AddChild(currentBuildInfo);
currentFeedAndDropDownContainer.AddChild(feedLabel);
currentFeedAndDropDownContainer.AddChild(whatsThisLink);
currentFeedAndDropDownContainer.AddChild(new HorizontalSpacer());
currentFeedAndDropDownContainer.AddChild(releaseOptionsDropList);
topToBottom.AddChild(currentFeedAndDropDownContainer);
topToBottom.AddChild(additionalInfoContainer);
buttonContainer.AddChild(new HorizontalSpacer());
buttonContainer.AddChild(closeButton);
topToBottom.AddChild(new VerticalSpacer());
topToBottom.AddChild(buttonContainer);
this.AddChild(topToBottom);
additionalInfoContainer.Visible = false;
if (UpdateControlData.Instance.UpdateRequired)
{
this.Title = "Update Required".Localize();
}
else
{
this.Title = "Check for Update".Localize();
}
this.BackgroundColor = ActiveTheme.Instance.PrimaryBackgroundColor;
this.ShowAsSystemWindow();
this.AlwaysOnTopOfMain = true;
}
private DropDownList CreateDropdown()
{
var dropDownList = new DropDownList(defaultMenuItemText, maxHeight: 300, useLeftIcons: true)
{
HAnchor = HAnchor.ParentLeftRight,
MenuItemsPadding = new BorderDouble(10, 4, 10, 6),
};
dropDownList.Margin = new BorderDouble(0, 3);
dropDownList.MinimumSize = new Vector2(dropDownList.LocalBounds.Width, dropDownList.LocalBounds.Height);
MenuItem defaultMenuItem = dropDownList.AddItem(defaultMenuItemText, "");
defaultMenuItem.Selected += MenuItem_Selected;
var listSource = (layerType == NamedSettingsLayers.Material) ? ActiveSliceSettings.Instance.MaterialLayers : ActiveSliceSettings.Instance.QualityLayers;
foreach (var layer in listSource)
{
MenuItem menuItem = dropDownList.AddItem(layer.Name, layer.LayerID);
menuItem.Selected += MenuItem_Selected;
}
MenuItem addNewPreset = dropDownList.AddItem(StaticData.Instance.LoadIcon("icon_plus.png", 32, 32), "Add New Setting...", "new");
addNewPreset.Selected += (s, e) =>
{
var newLayer = new PrinterSettingsLayer();
if (layerType == NamedSettingsLayers.Quality)
{
newLayer.Name = "Quality" + ActiveSliceSettings.Instance.QualityLayers.Count;
ActiveSliceSettings.Instance.QualityLayers.Add(newLayer);
ActiveSliceSettings.Instance.ActiveQualityKey = newLayer.LayerID;
}
else
{
newLayer.Name = "Material" + ActiveSliceSettings.Instance.MaterialLayers.Count;
ActiveSliceSettings.Instance.MaterialLayers.Add(newLayer);
ActiveSliceSettings.Instance.SetMaterialPreset(this.extruderIndex, newLayer.LayerID);
}
RebuildDropDownList();
editButton.ClickButton(new MouseEventArgs(MouseButtons.Left, 1, 0, 0, 0));
};
try
{
string settingsKey;
if (layerType == NamedSettingsLayers.Material)
{
settingsKey = ActiveSliceSettings.Instance.GetMaterialPresetKey(extruderIndex);
ActiveSliceSettings.Instance.MaterialLayers.CollectionChanged += SettingsLayers_CollectionChanged;
dropDownList.Closed += (s1, e1) =>
{
ActiveSliceSettings.Instance.MaterialLayers.CollectionChanged -= SettingsLayers_CollectionChanged;
};
}
else
{
settingsKey = ActiveSliceSettings.Instance.ActiveQualityKey;
ActiveSliceSettings.Instance.QualityLayers.CollectionChanged += SettingsLayers_CollectionChanged;
dropDownList.Closed += (s1, e1) =>
{
ActiveSliceSettings.Instance.QualityLayers.CollectionChanged -= SettingsLayers_CollectionChanged;
};
}
if (!string.IsNullOrEmpty(settingsKey))
{
dropDownList.SelectedValue = settingsKey;
}
}
catch (Exception ex)
{
GuiWidget.BreakInDebugger(ex.Message);
}
return dropDownList;
}
private static GuiWidget CreateSettingInfoUIControls(SliceSettingData settingData, List<PrinterSettingsLayer> layerCascade, PrinterSettingsLayer persistenceLayer,
NamedSettingsLayers viewFilter,
int extruderIndex, out bool addControl, ref int tabIndexForItem)
{
addControl = true;
GuiWidget container = new GuiWidget();
string sliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
GuiWidget nameArea = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter);
var dataArea = new FlowLayoutWidget();
GuiWidget unitsArea = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = settingData.ShowAsOverride ? 50 * GuiWidget.DeviceScale : 5,
};
GuiWidget restoreArea = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = settingData.ShowAsOverride ? 30 * GuiWidget.DeviceScale : 0,
};
var settingsRow = new SettingsRow(layerCascade)
{
SettingsKey = settingData.SlicerConfigName,
SettingsValue = sliceSettingValue,
};
settingsRow.AddChild(nameArea);
settingsRow.AddChild(dataArea);
settingsRow.AddChild(unitsArea);
settingsRow.AddChild(restoreArea);
settingsRow.Name = settingData.SlicerConfigName + " Edit Field";
if (!PrinterSettings.KnownSettings.Contains(settingData.SlicerConfigName))
{
// the setting we think we are adding is not in the known settings it may have been deprecated
TextWidget settingName = new TextWidget(String.Format("Setting '{0}' not found in known settings", settingData.SlicerConfigName));
settingName.TextColor = ActiveTheme.Instance.PrimaryTextColor;
//settingName.MinimumSize = new Vector2(minSettingNameWidth, settingName.MinimumSize.y);
nameArea.AddChild(settingName);
nameArea.BackgroundColor = RGBA_Bytes.Red;
}
else
{
int intEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int doubleEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int vectorXYEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int multiLineEditHeight = (int)(120 * GuiWidget.DeviceScale + .5);
if (settingData.DataEditType != SliceSettingData.DataEditTypes.MULTI_LINE_TEXT)
{
var nameHolder = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(0, 0, 5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
nameHolder.AddChild(new WrappedTextWidget(settingData.PresentationName.Localize(), pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor));
nameArea.AddChild(nameHolder);
}
switch (settingData.DataEditType)
{
case SliceSettingData.DataEditTypes.INT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
int currentValue;
int.TryParse(sliceSettingValue, out currentValue);
var intEditWidget = new MHNumberEdit(currentValue, pixelWidth: intEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Name = settingData.PresentationName + " Edit",
};
intEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(intEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, intEditWidget.ActuallNumberEdit.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
intEditWidget.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.DOUBLE:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowNegatives: true, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.POSITIVE_DOUBLE:
{
const string multiValuesAreDiffernt = "-";
FlowLayoutWidget content = new FlowLayoutWidget();
var doubleEditWidget = new MHNumberEdit(0, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
Name = settingData.PresentationName + " Textbox",
SelectAllOnFocus = true
};
double currentValue;
bool ChangesMultipleOtherSettings = settingData.SetSettingsOnChange.Count > 0;
if (ChangesMultipleOtherSettings)
{
bool allTheSame = true;
string setting = GetActiveValue(settingData.SetSettingsOnChange[0], layerCascade);
for (int i = 1; i < settingData.SetSettingsOnChange.Count; i++)
{
string nextSetting = GetActiveValue(settingData.SetSettingsOnChange[i], layerCascade);
if (setting != nextSetting)
{
allTheSame = false;
break;
}
}
if (allTheSame && setting.EndsWith("mm"))
{
double.TryParse(setting.Substring(0, setting.Length - 2), out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
else
{
doubleEditWidget.ActuallNumberEdit.InternalNumberEdit.Text = multiValuesAreDiffernt;
}
}
else // just set the setting normally
{
double.TryParse(sliceSettingValue, out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget.MarkAsStartingState();
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
NumberEdit numberEdit = (NumberEdit)sender;
// If this setting sets other settings, then do that.
if (ChangesMultipleOtherSettings
&& numberEdit.Text != multiValuesAreDiffernt)
{
foreach (string setting in settingData.SetSettingsOnChange)
{
ActiveSliceSettings.Instance.SetValue(setting, numberEdit.Value.ToString() + "mm", persistenceLayer);
}
}
// also always save to the local setting
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, numberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.OFFSET:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowDecimals: true, allowNegatives: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.DOUBLE_OR_PERCENT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
var textEditWidget = (TextEditWidget)sender;
string text = textEditWidget.Text.Trim();
bool isPercent = text.Contains("%");
if (isPercent)
{
text = text.Substring(0, text.IndexOf("%"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isPercent)
{
text += "%";
}
textEditWidget.Text = text;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, textEditWidget.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the % (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int percentIndex = textEditWidget.Text.IndexOf("%");
if (percentIndex != -1)
{
textEditWidget.SetSelection(0, percentIndex - 1);
}
};
content.AddChild(stringEdit);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.INT_OR_MM:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
string startingText = stringEdit.Text;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
TextEditWidget textEditWidget = (TextEditWidget)sender;
// only validate when we lose focus
if (!textEditWidget.ContainsFocus)
{
string text = textEditWidget.Text;
text = text.Trim();
bool isMm = text.Contains("mm");
if (isMm)
{
text = text.Substring(0, text.IndexOf("mm"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isMm)
{
text += "mm";
}
else
{
result = (int)result;
text = result.ToString();
}
textEditWidget.Text = text;
startingText = stringEdit.Text;
}
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, textEditWidget.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
// make sure we are still looking for the final validation before saving.
if (textEditWidget.ContainsFocus)
{
UiThread.RunOnIdle(() =>
{
string currentText = textEditWidget.Text;
int cursorIndex = textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore;
textEditWidget.Text = startingText;
textEditWidget.InternalTextEditWidget.MarkAsStartingState();
textEditWidget.Text = currentText;
textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore = cursorIndex;
});
}
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the mm (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int mMIndex = textEditWidget.Text.IndexOf("mm");
if (mMIndex != -1)
{
textEditWidget.SetSelection(0, mMIndex - 1);
}
};
content.AddChild(stringEdit);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.CHECK_BOX:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.Click += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, isChecked ? "1" : "0", persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) =>
{
checkBoxWidget.Checked = text == "1";
};
}
break;
case SliceSettingData.DataEditTypes.STRING:
{
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: settingData.ShowAsOverride ? 120 : 200, tabIndex: tabIndexForItem++)
{
Name = settingData.PresentationName + " Edit",
};
stringEdit.ToolTipText = settingData.HelpText;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((TextEditWidget)sender).Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(stringEdit);
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.MULTI_LINE_TEXT:
{
string convertedNewLines = sliceSettingValue.Replace("\\n", "\n");
var stringEdit = new MHTextEditWidget(convertedNewLines, pixelWidth: 320, pixelHeight: multiLineEditHeight, multiLine: true, tabIndex: tabIndexForItem++, typeFace: ApplicationController.MonoSpacedTypeFace)
{
HAnchor = HAnchor.ParentLeftRight,
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((TextEditWidget)sender).Text.Replace("\n", "\\n"), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
nameArea.HAnchor = HAnchor.AbsolutePosition;
nameArea.Width = 0;
dataArea.AddChild(stringEdit);
dataArea.HAnchor = HAnchor.ParentLeftRight;
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text.Replace("\\n", "\n");
};
}
break;
case SliceSettingData.DataEditTypes.COM_PORT:
{
#if __ANDROID__
addControl = false;
#endif
// The COM_PORT control is unique in its approach to the SlicerConfigName. It uses "com_port" settings name to
// bind to a context that will place it in the SliceSetting view but it binds its values to a machine
// specific dictionary key that is not exposed in the UI. At runtime we lookup and store to '<machinename>_com_port'
// ensuring that a single printer can be shared across different devices and we'll select the correct com port in each case
var selectableOptions = new DropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble(),
Name = "Com Port Dropdown"
};
selectableOptions.Click += (s, e) =>
{
AddComMenuItems(settingData, persistenceLayer, settingsRow, selectableOptions);
};
AddComMenuItems(settingData, persistenceLayer, settingsRow, selectableOptions);
dataArea.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) =>
{
// Lookup the machine specific comport value rather than the passed in text value
selectableOptions.SelectedLabel = ActiveSliceSettings.Instance.Helpers.ComPort();
};
}
break;
case SliceSettingData.DataEditTypes.LIST:
{
var selectableOptions = new DropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble()
};
foreach (string listItem in settingData.ExtraSettings.Split(','))
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == sliceSettingValue)
{
selectableOptions.SelectedLabel = sliceSettingValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, menuItem.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
dataArea.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) =>
{
selectableOptions.SelectedLabel = text;
};
}
break;
case SliceSettingData.DataEditTypes.HARDWARE_PRESENT:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.Click += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, isChecked ? "1" : "0", persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) =>
{
checkBoxWidget.Checked = text == "1";
};
}
break;
case SliceSettingData.DataEditTypes.VECTOR2:
{
string[] xyValueStrings = sliceSettingValue.Split(',');
if (xyValueStrings.Length != 2)
{
xyValueStrings = new string[] { "0", "0" };
}
double currentXValue;
double.TryParse(xyValueStrings[0], out currentXValue);
var xEditWidget = new MHNumberEdit(currentXValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
double currentYValue;
double.TryParse(xyValueStrings[1], out currentYValue);
var yEditWidget = new MHNumberEdit(currentYValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(20, 0, 0, 0),
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(xEditWidget);
dataArea.AddChild(new TextWidget("X", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(5, 0),
});
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(yEditWidget);
var yLabel = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
yLabel.AddChild(new WrappedTextWidget("Y", pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
unitsArea.AddChild(yLabel);
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
string[] xyValueStrings2 = text.Split(',');
if (xyValueStrings2.Length != 2)
{
xyValueStrings2 = new string[] { "0", "0" };
}
double.TryParse(xyValueStrings2[0], out currentValue2);
xEditWidget.ActuallNumberEdit.Value = currentValue2;
double.TryParse(xyValueStrings2[1], out currentValue2);
yEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.OFFSET2:
{
Vector2 offset = ActiveSliceSettings.Instance.Helpers.ExtruderOffset(extruderIndex);
var xEditWidget = new MHNumberEdit(offset.x, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
};
var yEditWidget = new MHNumberEdit(offset.y, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(20, 0, 0, 0),
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, layerCascade, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(xEditWidget);
dataArea.AddChild(new TextWidget("X", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(5, 0),
});
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, layerCascade, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(yEditWidget);
var yLabel = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
yLabel.AddChild(new WrappedTextWidget("Y", pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
unitsArea.AddChild(yLabel);
settingsRow.ValueChanged = (text) =>
{
Vector2 offset2 = ActiveSliceSettings.Instance.Helpers.ExtruderOffset(extruderIndex);
xEditWidget.ActuallNumberEdit.Value = offset2.x;
yEditWidget.ActuallNumberEdit.Value = offset2.y;
};
}
break;
default:
var missingSetting = new TextWidget(String.Format("Missing the setting for '{0}'.", settingData.DataEditType.ToString()))
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
BackgroundColor = RGBA_Bytes.Red
};
dataArea.AddChild(missingSetting);
break;
}
}
container.HAnchor = HAnchor.ParentLeftRight;
container.VAnchor = VAnchor.FitToChildren;
Button restoreButton = null;
if (settingData.ShowAsOverride)
{
restoreButton = new Button(new ButtonViewStates(new ImageWidget(restoreNormal), new ImageWidget(restoreHover), new ImageWidget(restorePressed), new ImageWidget(restoreNormal)))
{
Name = "Restore " + settingData.SlicerConfigName,
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(0, 0, 5, 0),
ToolTipText = "Restore Default".Localize()
};
restoreButton.Click += (sender, e) =>
{
// Revert the user override
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName);
}
else
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName, persistenceLayer);
}
settingsRow.RefreshValue(layerCascade);
OnSettingsChanged(settingData);
};
restoreArea.AddChild(restoreButton);
}
container.AddChild(settingsRow);
// Define the UpdateStyle implementation
settingsRow.UpdateStyle = () =>
{
if (persistenceLayer.ContainsKey(settingData.SlicerConfigName))
{
switch (viewFilter)
{
case NamedSettingsLayers.All:
if (settingData.ShowAsOverride)
{
settingsRow.BackgroundColor = userSettingBackgroundColor;
}
break;
case NamedSettingsLayers.Material:
settingsRow.BackgroundColor = materialSettingBackgroundColor;
break;
case NamedSettingsLayers.Quality:
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
break;
}
if(restoreButton != null) restoreButton.Visible = true;
}
else if (layerCascade == null)
{
if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Material))
{
settingsRow.BackgroundColor = materialSettingBackgroundColor;
}
else if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Quality))
{
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
}
else
{
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
if (restoreButton != null) restoreButton.Visible = false;
}
else
{
if (restoreButton != null) restoreButton.Visible = false;
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
};
// Invoke the UpdateStyle implementation
settingsRow.UpdateStyle();
return container;
}
private static GuiWidget CreateQuickMenu(SliceSettingData settingData, PrinterSettingsLayer persistenceLayer, GuiWidget content, InternalTextEditWidget internalTextWidget, List<PrinterSettingsLayer> layerCascade)
{
string sliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
FlowLayoutWidget totalContent = new FlowLayoutWidget();
DropDownList selectableOptions = new DropDownList("Custom", maxHeight: 200);
selectableOptions.Margin = new BorderDouble(0, 0, 10, 0);
foreach (QuickMenuNameValue nameValue in settingData.QuickMenuSettings)
{
string valueLocal = nameValue.Value;
MenuItem newItem = selectableOptions.AddItem(nameValue.MenuName);
if (sliceSettingValue == valueLocal)
{
selectableOptions.SelectedLabel = nameValue.MenuName;
}
newItem.Selected += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, valueLocal, persistenceLayer);
OnSettingsChanged(settingData);
internalTextWidget.Text = valueLocal;
internalTextWidget.OnEditComplete(null);
};
}
// put in the custom menu to allow direct editing
MenuItem customMenueItem = selectableOptions.AddItem("Custom");
totalContent.AddChild(selectableOptions);
content.VAnchor = VAnchor.ParentCenter;
totalContent.AddChild(content);
EventHandler localUnregisterEvents = null;
SettingChanged.RegisterEvent((sender, e) =>
{
bool foundSetting = false;
foreach (QuickMenuNameValue nameValue in settingData.QuickMenuSettings)
{
string localName = nameValue.MenuName;
string newSliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
if (newSliceSettingValue == nameValue.Value)
{
selectableOptions.SelectedLabel = localName;
foundSetting = true;
break;
}
}
if (!foundSetting)
{
selectableOptions.SelectedLabel = "Custom";
}
}, ref localUnregisterEvents);
totalContent.Closed += (s, e) =>
{
localUnregisterEvents?.Invoke(s, e);
};
return totalContent;
}
private static void AddComMenuItems(SliceSettingData settingData, PrinterSettingsLayer persistenceLayer, SettingsRow settingsRow, DropDownList selectableOptions)
{
selectableOptions.MenuItems.Clear();
string machineSpecificComPortValue = ActiveSliceSettings.Instance.Helpers.ComPort();
foreach (string listItem in FrostedSerialPort.GetPortNames())
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == machineSpecificComPortValue)
{
selectableOptions.SelectedLabel = machineSpecificComPortValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
// Directly set the ComPort
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.Helpers.SetComPort(menuItem.Text);
}
else
{
ActiveSliceSettings.Instance.Helpers.SetComPort(menuItem.Text, persistenceLayer);
}
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
}
public SliceSettingsDetailControl(List<PrinterSettingsLayer> layerCascade)
{
showHelpBox = new CheckBox(0, 0, "Show Help".Localize(), textSize: 10)
{
VAnchor = VAnchor.ParentCenter,
};
if (layerCascade == null)
{
// only turn of the help if in the main view and it is set to on
showHelpBox.Checked = UserSettings.Instance.get(SliceSettingsShowHelpEntry) == "true";
}
// add in the ability to turn on and off help text
showHelpBox.TextColor = ActiveTheme.Instance.PrimaryTextColor;
showHelpBox.Margin = new BorderDouble(right: 3);
showHelpBox.VAnchor = VAnchor.ParentCenter;
showHelpBox.Cursor = Cursors.Hand;
showHelpBox.CheckedStateChanged += (s, e) =>
{
if (layerCascade == null)
{
// only save the help settings if in the main view
UserSettings.Instance.set(SliceSettingsShowHelpEntry, showHelpBox.Checked.ToString().ToLower());
}
ShowHelpChanged?.Invoke(this, null);
};
this.AddChild(showHelpBox);
settingsDetailSelector = new DropDownList("Basic", maxHeight: 200);
settingsDetailSelector.Name = "User Level Dropdown";
settingsDetailSelector.AddItem("Basic".Localize(), "Simple");
settingsDetailSelector.AddItem("Standard".Localize(), "Intermediate");
settingsDetailSelector.AddItem("Advanced".Localize(), "Advanced");
if (layerCascade == null)
{
// set to the user requested value when in default view
if (UserSettings.Instance.get(SliceSettingsLevelEntry) != null
&& SliceSettingsOrganizer.Instance.UserLevels.ContainsKey(UserSettings.Instance.get(SliceSettingsLevelEntry)))
{
settingsDetailSelector.SelectedValue = UserSettings.Instance.get(SliceSettingsLevelEntry);
}
}
else // in settings editor view
{
// set to advanced
settingsDetailSelector.SelectedValue = "Advanced";
}
settingsDetailSelector.SelectionChanged += (s, e) => RebuildSlicerSettings(null, null); ;
settingsDetailSelector.VAnchor = VAnchor.ParentCenter;
settingsDetailSelector.Margin = new BorderDouble(5, 3);
settingsDetailSelector.BorderColor = new RGBA_Bytes(ActiveTheme.Instance.SecondaryTextColor, 100);
if (layerCascade == null)
{
// only add these in the default view
this.AddChild(settingsDetailSelector);
this.AddChild(GetSliceOptionsMenuDropList());
}
VAnchor = VAnchor.ParentCenter;
}
public void AddReleaseOptions(FlowLayoutWidget controlsTopToBottom)
{
AltGroupBox releaseOptionsGroupBox = new AltGroupBox(LocalizedString.Get("Update Feed"));
releaseOptionsGroupBox.Margin = new BorderDouble(0);
releaseOptionsGroupBox.TextColor = ActiveTheme.Instance.PrimaryTextColor;
releaseOptionsGroupBox.BorderColor = ActiveTheme.Instance.PrimaryTextColor;
releaseOptionsGroupBox.HAnchor = Agg.UI.HAnchor.ParentLeftRight;
releaseOptionsGroupBox.VAnchor = Agg.UI.VAnchor.ParentTop;
releaseOptionsGroupBox.Height = 68;
FlowLayoutWidget controlsContainer = new FlowLayoutWidget();
controlsContainer.HAnchor |= HAnchor.ParentCenter;
var releaseOptionsDropList = new DropDownList("Development");
releaseOptionsDropList.Margin = new BorderDouble(0, 3);
MenuItem releaseOptionsDropDownItem = releaseOptionsDropList.AddItem("Release", "release");
releaseOptionsDropDownItem.Selected += new EventHandler(FixTabDot);
MenuItem preReleaseDropDownItem = releaseOptionsDropList.AddItem("Pre-Release", "pre-release");
preReleaseDropDownItem.Selected += new EventHandler(FixTabDot);
MenuItem developmentDropDownItem = releaseOptionsDropList.AddItem("Development", "development");
developmentDropDownItem.Selected += new EventHandler(FixTabDot);
releaseOptionsDropList.MinimumSize = new Vector2(releaseOptionsDropList.LocalBounds.Width, releaseOptionsDropList.LocalBounds.Height);
List<string> acceptableUpdateFeedTypeValues = new List<string>() { "release", "pre-release", "development" };
string currentUpdateFeedType = UserSettings.Instance.get(UserSettingsKey.UpdateFeedType);
if (acceptableUpdateFeedTypeValues.IndexOf(currentUpdateFeedType) == -1)
{
UserSettings.Instance.set(UserSettingsKey.UpdateFeedType, "release");
}
releaseOptionsDropList.SelectedValue = UserSettings.Instance.get(UserSettingsKey.UpdateFeedType);
releaseOptionsDropList.SelectionChanged += new EventHandler(ReleaseOptionsDropList_SelectionChanged);
controlsContainer.AddChild(releaseOptionsDropList);
releaseOptionsGroupBox.AddChild(controlsContainer);
controlsTopToBottom.AddChild(releaseOptionsGroupBox);
}
