/// <summary>
/// Save the user settings to a persistent data store.
/// </summary>
private static void LocalWrite()
{
IsolatedStorageFileStream isolatedStorageFileStream = null;
try
{
// Create the document that will hold the application settings.
IsolatedStorageFile isolatedStorageFile = IsolatedStorageFile.GetUserStoreForAssembly();
// Create the document that will hold the application settings.
isolatedStorageFileStream = new IsolatedStorageFileStream(profileFileName,
FileMode.Create, FileAccess.Write, FileShare.None, isolatedStorageFile);
BinaryFormatter binaryFormatter = new BinaryFormatter();
binaryFormatter.Serialize(isolatedStorageFileStream, UserPreferences.localSettings);
}
catch (Exception exception)
{
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
finally
{
if (isolatedStorageFileStream != null)
{
isolatedStorageFileStream.Close();
}
}
}
/// <summary>
/// Parses a section of the configuration file for information about the persistent stores.
/// </summary>
/// <param name="parent">The configuration settings in a corresponding parent configuration section.</param>
/// <param name="configContext">An HttpConfigurationContext when Create is called from the ASP.NET configuration system.
/// Otherwise, this parameter is reserved and is a null reference.</param>
/// <param name="section">The XmlNode that contains the configuration information from the configuration file. Provides direct access to the XML contents of the configuration section.</param>
/// <returns>A ViewerSection object created from the data in the configuration file.</returns>
public object Create(object parent, object configContext, System.Xml.XmlNode section)
{
// Create an object to hold the data from the 'viewer' section of the application configuration file.
ViewerSection viewerSection = new ViewerSection();
try
{
// Read each of the nodes that contain information about the persistent stores and place them in the table.
foreach (XmlNode xmlNode in section.SelectNodes("add"))
{
// The 'type' section of the configuration file is modeled after other places in the OS where the type and
// assembly information are combined in the same string. A simpler method might have been to break aprart the
// type string from the assembly string, but it's also a good idea to use standards where you find them. In
// any event, when the 'type' specification is done this way, the padded spaces need to be removed from the
// values onced they're broken out from the original string.
string typeSpecification = xmlNode.Attributes["type"].Value;
if (typeSpecification == null)
{
throw new Exception("Syntax error in configuration file section 'viewers'.");
}
string[] typeParts = typeSpecification.Split(new char[] { ',' });
if (typeParts.Length != 2)
{
throw new Exception("Syntax error in configuration file section 'viewers'.");
}
Assembly typeAssembly = Assembly.Load(typeParts[ViewerSectionHandler.AssemblyIndex].Trim());
Type typeType = typeAssembly.GetType(typeParts[ViewerSectionHandler.TypeIndex]);
string viewerSpecification = xmlNode.Attributes["viewer"].Value;
if (viewerSpecification == null)
{
throw new Exception("Syntax error in configuration file section 'viewers'.");
}
string[] viewerParts = viewerSpecification.Split(new char[] { ',' });
if (viewerParts.Length != 2)
{
throw new Exception("Syntax error in configuration file section 'viewers'.");
}
Assembly viewerAssembly = Assembly.Load(viewerParts[ViewerSectionHandler.AssemblyIndex].Trim());
Type viewerType = viewerAssembly.GetType(viewerParts[ViewerSectionHandler.TypeIndex]);
// Add the viewer information to the section. Each of these ViewerInfo items describes what kind of object the
// viewer is associated with and where to find the viewer.
viewerSection.Add(new ViewerInfo(typeType, viewerType));
}
}
catch (Exception exception)
{
// Make sure that any errors caught while trying to load the viewer info is recorded in the log. A system
// administrator can look through these to figure out why the viewer information isn't formatted correctly.
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
// This object can be used to find a persistent store by nane and connect to it.
return(viewerSection);
}
public WebPage(params object[] parameter)
{
try
{
// Initialize the object.
this.Uri = new System.Uri((string)parameter[0]);
}
catch (Exception exception)
{
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
}
/// <summary>
/// Play the sound specified by the .WAV file sent as a parameter.
/// </summary>
/// <param name="filename">The name of the .WAV file to play.</param>
public static void PlaySound(string filename)
{
try
{
// Play the sound from the filename.
PlaySound(filename, 0L, 0x0001 | 0x00020000);
}
catch (Exception exception)
{
// Throw any error messages out to the debug listener.
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
}
/// <summary>
/// Play a system sound
/// </summary>
/// <param name="sound"></param>
public static void PlaySound(uint sound)
{
try
{
// Play the sound from the operating system.
MessageBeep(sound);
}
catch (Exception exception)
{
// Throw any error messages out to the debug listener.
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
}
static TransactionProtocol()
{
try
{
// The PersistentStoreSection contains information about what databases and other 'persistent' storage is
// available. For example, an SQL Database would have a unique short name, used to identify the database, and a
// connection string. This data would be used to establish a connection to the store for queries, inserts, updates
// and deletes. Each library class that can participate in a transaction to this store will specify the short name
// of the store in a 'PersistentStore' field.
TransactionProtocol.resourceDescriptionList =
(List <ResourceDescription>)ConfigurationManager.GetSection("resourceSection");
}
catch (Exception exception)
{
// Any problems initializing should be sent to the Event Log.
EventLog.Error("{0}: {1}", exception.Message, exception.StackTrace);
}
}
static public object Compile(MetaAssembly metaAssembly, params object[] parameters)
{
object instance = null;
CSharpCodeProvider cSharpCodeProvider = new CSharpCodeProvider();
CompilerParameters compilerParameters = new CompilerParameters();
compilerParameters.OutputAssembly = metaAssembly.OutputAssembly;
compilerParameters.TreatWarningsAsErrors = metaAssembly.TreatWarningsAsErrors;
compilerParameters.WarningLevel = metaAssembly.WarningLevel;
compilerParameters.GenerateExecutable = metaAssembly.GenerateExecutable;
compilerParameters.CompilerOptions = metaAssembly.CompilerOptions;
compilerParameters.GenerateInMemory = metaAssembly.GenerateInMemory;
compilerParameters.IncludeDebugInformation = metaAssembly.IncludeDebugInformation;
if (metaAssembly.Dependancies != null && metaAssembly.Dependancies.Length != 0)
{
compilerParameters.ReferencedAssemblies.AddRange(metaAssembly.Dependancies);
}
// Invoke compilation.
CompilerResults compilerResults = cSharpCodeProvider.CompileAssemblyFromSource(compilerParameters, metaAssembly.SourceCode);
if (compilerResults.Errors.Count > 0)
{
foreach (CompilerError compilerError in compilerResults.Errors)
{
EventLog.Error("{0}: {1}", compilerParameters.OutputAssembly, compilerError.ToString());
}
}
else
{
instance = compilerResults.CompiledAssembly.CreateInstance(metaAssembly.OutputType, false, BindingFlags.CreateInstance,
null, parameters, CultureInfo.InvariantCulture, null);
}
if (compilerResults.Errors.Count > 0)
{
throw new Exception(string.Format("Module {0} had {1} compilation errors", compilerParameters.OutputAssembly,
compilerResults.Errors.Count));
}
return(instance);
}
/// <summary>
/// Save the user settings to a persistent data store.
/// </summary>
private static void GlobalWrite()
{
try
{
// MemoryStream memoryStream = new MemoryStream();
// BinaryFormatter binaryFormatter = new BinaryFormatter();
// binaryFormatter.Serialize(memoryStream, UserPreferences.globalSettings);
//
// FileStream fileStream = new FileStream("SettingsTest", FileMode.OpenOrCreate, FileAccess.Write);
// BinaryWriter binaryWriter = new BinaryWriter(fileStream);
// byte[] settingStream = memoryStream.GetBuffer();
// binaryWriter.Write(settingStream.Length);
// binaryWriter.Write(settingStream);
// binaryWriter.Close();
}
catch (Exception exception)
{
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
}
/// <summary>
/// Load the settings from the local persistent store.
/// </summary>
private static void GlobalRead()
{
try
{
// FileStream fileStream = new FileStream("SettingsTest", FileMode.Open, FileAccess.Read);
// BinaryReader binaryReader = new BinaryReader(fileStream);
// int streamSize = binaryReader.ReadInt32();
// Byte[] settingStream = binaryReader.ReadBytes(streamSize);
// binaryReader.Close();
//
// MemoryStream memoryStream = new MemoryStream(settingStream);
// BinaryFormatter binaryFormatter = new BinaryFormatter();
// UserPreferences.globalSettings = (Hashtable)binaryFormatter.Deserialize(memoryStream);
// memoryStream.Close();
}
catch (Exception exception)
{
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
}
/// <summary>
/// Executes a batch of commands as a series of transactions that are committed or rejected as a unit.
/// </summary>
static BatchProcessor()
{
try
{
// The 'resourceSection' section of the configuration file contains about the resource managers available for the
// transaction processor. Volatile Resource Managers provide an API and housekeeping data for managing the memory
// based data while the Durable Resource Managers govern the handling of the data that resides on a disk
// somewhere. This section of the configuration file describes the resource managers available and their
// properties.
BatchProcessor.resourceDescriptionList = (List <ResourceDescription>)ConfigurationManager.GetSection("resourceSection");
// This will read through each of the descriptions of the resource managers found in the configuratino file and
// initialize the static properties.
foreach (ResourceDescription resourceDescription in BatchProcessor.resourceDescriptionList)
{
if (resourceDescription is SqlResourceDescription)
{
SqlResourceDescription sqlResourceDescription = resourceDescription as SqlResourceDescription;
SqlResourceManager.AddConnection(sqlResourceDescription.Name, sqlResourceDescription.ConnectionString);
}
}
// This will read through each of the descriptions of the resource managers found in the configuratino file and
// initialize the static properties.
foreach (ResourceDescription resourceDescription in BatchProcessor.resourceDescriptionList)
{
if (resourceDescription is AdoResourceDescription)
{
AdoResourceDescription adoResourceDescription = resourceDescription as AdoResourceDescription;
MethodInfo methodInfo = adoResourceDescription.Type.GetMethod("GetDataSet");
AdoResourceManager.AddDataSet(adoResourceDescription.Name, methodInfo.Invoke(null, null) as DataSet);
}
}
}
catch (Exception exception)
{
// Any problems initializing should be sent to the Event Log.
EventLog.Error("{0}: {1}", exception.Message, exception.StackTrace);
}
}
/// <summary>
/// Load the settings from the local persistent store.
/// </summary>
private static void LocalRead()
{
IsolatedStorageFileStream isolatedStorageFileStream = null;
UserPreferences.localSettings = new Hashtable();
try
{
// See if a file already exists with the user's preferences. The scope of the isolated store is the 'Batch.Assembly' level, which means that
// any code using this class will share the same settings.
IsolatedStorageFile isolatedStorageFile = IsolatedStorageFile.GetUserStoreForAssembly();
if (isolatedStorageFile.GetFileNames(profileFileName).Length != 0)
{
// Open the "User Preferences" store for this application/user combination.
isolatedStorageFileStream = new IsolatedStorageFileStream(profileFileName,
FileMode.Open, FileAccess.Read, FileShare.None, isolatedStorageFile);
BinaryFormatter binaryFormatter = new BinaryFormatter();
UserPreferences.localSettings = (Hashtable)binaryFormatter.Deserialize(isolatedStorageFileStream);
}
}
catch (Exception exception)
{
UserPreferences.localSettings.Clear();
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
finally
{
if (isolatedStorageFileStream != null)
{
isolatedStorageFileStream.Close();
}
}
}
/// <summary>
/// Execute the batch on the Web Transaction server and return the results to the caller.
/// </summary>
/// <param name="batch">Contains one or more transactions that are executed on the server. The results of executing the
/// batch are returned to the caller in this object.</param>
Result IBatchHandler.Execute(Batch batch)
{
Result batchResult = null;
// These streams must be shut down, even when an exception is taken. They are declared here so they can be accessed by
// the 'finally' clause should something go wrong.
Stream requestStream = null;
WebResponse webResponse = null;
Stream responseStream = null;
try
{
// The client communicates the 'batch' data structure to the server using an HTTP channel. The channel is
// configured to use SSL and Certificates to insure the privacy of the conversation.
WebRequest webRequest = CreateCertificateRequest();
// The 'batch' data structure is serialized and compressed before being sent to the server.
MemoryStream memoryStreamRequest = new MemoryStream();
BinaryFormatter binaryFormatter = new BinaryFormatter();
binaryFormatter.Serialize(memoryStreamRequest, batch);
// This section will compress the serial stream. Note that it must be compressed into an intermediate buffer
// before being sent via the HttpWebRequest class because the number of bytes must be known before the call is made
// for the 'ContentLength' parameter of the HttpWebRequest object.
memoryStreamRequest.Position = 0L;
requestStream = webRequest.GetRequestStream();
DeflateStream requestDeflateStream = new DeflateStream(requestStream, CompressionMode.Compress, true);
requestDeflateStream.Write(memoryStreamRequest.GetBuffer(), 0, (int)memoryStreamRequest.Length);
requestDeflateStream.Close();
requestStream.Close();
// This is where all the work is done. Send the Request to the HTTP Server and get the response. In this
// case, the response will be the results of executing the remote batch. Note that we get back only the
// framework of the RPB, not all the parameters, methods, assemblies and types. This is an optimization so
// that the same data isn't sent twice over the network. This 'differential' data will be merged with the
// original. To the user, it appears that the Remote Batch.Method Batch was sent to the server, filled in with
// result and exception data, then returned to the calling method. Actually, the batch was sent, the results
// and exceptions returned, and it was all stitched back together again before the user gets it.
webResponse = webRequest.GetResponse();
// Decompress the results from the HttpWebResponse stream.
responseStream = webResponse.GetResponseStream();
DeflateStream responseDeflateStream = new DeflateStream(responseStream, CompressionMode.Decompress);
byte[] uncompressedBuffer = CompressedStreamReader.ReadBytes(responseDeflateStream);
responseDeflateStream.Close();
// Deserialize the batch results and merge it back with the original structure. The 'BatchResult'
// structure has the same basic structure as the original batch, but only contains output parameters and
// exceptions.
MemoryStream memoryStreamResponse = new MemoryStream(uncompressedBuffer);
BinaryFormatter binaryFormatterResponse = new BinaryFormatter();
batchResult = (Result)binaryFormatterResponse.Deserialize(memoryStreamResponse);
memoryStreamResponse.Close();
}
catch (WebException webException)
{
// The response in the exception usually indicates that we found the server, but the protocol failed for some
// reason. When the response is empty, that usually indicates that the URL is bad or the server is down for
// some reason.
if (webException.Response == null)
{
// Log the error.
EventLog.Error("Web Exception {0}, {1}", webException.Status, webException.Message);
}
else
{
// Extract the information sent back from the server and log it.
webResponse = (HttpWebResponse)webException.Response;
EventLog.Error(webException.Message);
// Present the user with the error code. There may be a better way to do this, but this will work for now.
MessageBox.Show(webException.Message, string.Format("{0} - {1}", Application.ProductName, Properties.Resources.ConnectionError));
}
// Prompt the user for the URL and credentials again.
HttpBatchProcessor.IsUrlPrompted = true;
HttpBatchProcessor.IsCredentialPrompted = true;
// This gives the caller a unified way to handle all exceptions that may have occurred while processing a batch.
// The Web Exceptions are handled the same way as errors from the server.
throw new BatchException(webException);
}
catch (UserAbortException)
{
// forward the exception so the caller can decide what to do.
throw;
}
catch (Exception exception)
{
// This gives the caller a unified way to handle all exceptions that may have occurred while processing a batch.
// The general exceptions are handled the same way as exceptions from the server.
throw new BatchException(exception);
}
finally
{
// Make sure that every stream involved with the request is closed when the WebRequest is finished.
if (requestStream != null)
{
requestStream.Close();
}
if (responseStream != null)
{
responseStream.Close();
}
if (webResponse != null)
{
webResponse.Close();
}
}
return(batchResult);
}
/// <summary>
/// Parses a section of the configuration file for information about the persistent stores.
/// </summary>
/// <param name="parent">The configuration settings in a corresponding parent configuration section.</param>
/// <param name="configContext">An HttpConfigurationContext when Create is called from the ASP.NET configuration system.
/// Otherwise, this parameter is reserved and is a null reference.</param>
/// <param name="section">The XmlNode that contains the configuration information from the configuration file. Provides direct access to the XML contents of the configuration section.</param>
/// <returns>A ToolSection object created from the data in the configuration file.</returns>
public object Create(object parent, object configContext, System.Xml.XmlNode section)
{
// Create an object to hold the data from the 'tool' section of the application configuration file.
ToolSection toolSection = new ToolSection();
try
{
// Read each of the nodes that contain information about the persistent stores and place them in the table.
foreach (XmlNode xmlNode in section.SelectNodes("add"))
{
// The 'type' section of the configuration file is modeled after other places in the OS where the type and
// assembly information are combined in the same string. A simpler method might have been to break aprart the
// type string from the assembly string, but it's also a good idea to use standards where you find them. In
// any event, when the 'type' specification is done this way, the padded spaces need to be removed from the
// values onced they're broken out from the original string.
XmlAttribute keyAttribute = xmlNode.Attributes["key"];
if (keyAttribute == null)
{
throw new Exception("Syntax error in configuration file section 'tools'.");
}
string name = keyAttribute.Value;
// The text appears in the 'Tools' menu.
XmlAttribute textAttribute = xmlNode.Attributes["text"];
if (textAttribute == null)
{
throw new Exception("Syntax error in configuration file section 'tools'.");
}
string text = textAttribute.Value;
// Pull apart the tool specification from the attributes.
XmlAttribute toolSpecificationAttribute = xmlNode.Attributes["tool"];
if (toolSpecificationAttribute == null)
{
throw new Exception("Syntax error in configuration file section 'tools'.");
}
string[] toolParts = toolSpecificationAttribute.Value.Split(new char[] { ',' });
if (toolParts.Length != 2)
{
throw new Exception("Syntax error in configuration file section 'tools'.");
}
// Attempt to load the tool into memory and find the type used to instantiate the tool.
Assembly toolAssembly = Assembly.Load(toolParts[ToolSectionHandler.AssemblyIndex].Trim());
Type toolType = toolAssembly.GetType(toolParts[ToolSectionHandler.TypeIndex]);
// Add the tool information to the section. Each of these ToolInfo items describes what kind of object the
// tool is associated with and where to find the tool.
toolSection.Add(new ToolInfo(name, text, toolType));
}
}
catch (Exception exception)
{
// Make sure that any errors caught while trying to load the tool info is recorded in the log. A system
// administrator can look through these to figure out why the tool information isn't formatted correctly.
EventLog.Error("{0}, {1}", exception.Message, exception.StackTrace);
}
// This object can be used to find a persistent store by nane and connect to it.
return(toolSection);
}