// The starting point for doing flicker free rendering when transitioning a real time
// stroke from the DynamicRenderer thread to the application thread.
//
// There's a multi-step process to do this. We now alternate between the two host visuals
// to do the transtion work. Only one HostVisual can be doing a full transition at one time.
// When ones busy the other one reverts back to just removing the real time visual without
// doing the full flicker free work.
//
// Here's the steps for a full transition using a Single DynamicRendererHostVisual:
//
// 1) [UI Thread] Set HostVisual.Clip = zero rect and then wait for render complete of that
// 2) [UI Thread] On RenderComplete gets hit - Call over to DR thread to remove real time visual
// 3) [DR Thread] Removed real time stroke visual and wait for rendercomplete of that
// 4) [DR Thread] On RenderComplete of that call back over to UI thread to let it know that's done
// 5) [UI Thread] Reset HostVisual.Clip = null and wait for render complete of that
// 6) [UI Thread] On rendercomplete - we done. Mark this HostVisual as free.
//
// In the case of another stroke coming through before a previous transition has completed
// then basically instead of starting with step 1 we jump to step 2 and when then on step 5
// we mark the HostVisual free and we are done.
//
void TransitionStrokeVisuals(StrokeInfo si, bool abortStroke)
{
// Make sure we don't get any more input for this stroke.
RemoveStrokeInfo(si);
// remove si visuals and this si
if (si.StrokeCV != null)
{
if (_mainRawInkContainerVisual != null)
{
_mainRawInkContainerVisual.Children.Remove(si.StrokeCV);
}
si.StrokeCV = null;
}
si.FillBrush = null;
// Nothing to do if we've destroyed our host visuals.
if (_rawInkHostVisual1 == null)
return;
bool doRenderComplete = false;
// See if we can do full transition (only when none in progress and not abort)
if (!abortStroke && _renderCompleteStrokeInfo == null)
{
// make sure lock does not cause reentrancy on application thread!
using (_applicationDispatcher.DisableProcessing())
{
lock (__siLock)
{
// We can transition the host visual only if a single reference is on it.
if (si.StrokeHV.HasSingleReference)
{
Debug.Assert(si.StrokeHV.Clip == null);
si.StrokeHV.Clip = _zeroSizedFrozenRect;
Debug.Assert(_renderCompleteStrokeInfo == null);
_renderCompleteStrokeInfo = si;
doRenderComplete = true;
}
}
}
}
if (doRenderComplete)
{
NotifyOnNextRenderComplete();
}
else
{
// Just wait to dynamic rendering thread is updated then we're done.
RemoveDynamicRendererVisualAndNotifyWhenDone(si);
}
}
private void NotifyAppOfDRThreadRenderComplete(StrokeInfo si)
{
Dispatcher dispatcher = _applicationDispatcher;
if (dispatcher != null)
{
// We are being called by the inking thread, so marshal over to
// the UI thread before handling the StrokeInfos that are done rendering.
dispatcher.BeginInvoke(DispatcherPriority.Send,
(DispatcherOperationCallback)delegate(object unused)
{
// See if this is the one we are doing a full transition for.
if (si == _renderCompleteStrokeInfo)
{
if (si.StrokeHV.Clip != null)
{
si.StrokeHV.Clip = null;
NotifyOnNextRenderComplete();
}
else
{
Debug.Assert(_waitingForRenderComplete, "We were expecting to be waiting for a RenderComplete to call our OnRenderComplete, we might never reset and get flashing strokes from here on out");
TransitionComplete(si); // We're done
}
}
else
{
TransitionComplete(si); // We're done
}
return null;
},
null);
}
}
/////////////////////////////////////////////////////////////////////
void RenderPackets(StylusPointCollection stylusPoints, StrokeInfo si)
{
// If no points or not hooked up to element then do nothing.
if (stylusPoints.Count == 0 || _applicationDispatcher == null)
return;
// Get a collection of ink nodes built from the new stylusPoints.
si.StrokeNodeIterator = si.StrokeNodeIterator.GetIteratorForNextSegment(stylusPoints);
if (si.StrokeNodeIterator != null)
{
// Create a PathGeometry representing the contour of the ink increment
Geometry strokeGeometry;
Rect bounds;
StrokeRenderer.CalcGeometryAndBounds(si.StrokeNodeIterator,
si.DrawingAttributes,
#if DEBUG_RENDERING_FEEDBACK
null, //debug dc
0d, //debug feedback size
false,//render debug feedback
#endif
false, //calc bounds
out strokeGeometry,
out bounds);
// If we are called from the app thread we can just stay on it and render to that
// visual tree. Otherwise we need to marshal over to our inking thread to do our work.
if (_applicationDispatcher.CheckAccess())
{
// See if we need to create a new container visual for the stroke.
if (si.StrokeCV == null)
{
// Create new container visual for this stroke and add our incremental rendering visual to it.
si.StrokeCV = new ContainerVisual();
// NTRAID#WINOS-1133229-2005/04/27-XIAOTU: two incrementally rendered stroke segments blend together
// at the rendering point location, thus the alpha value at those locations are higher than the set value.
// This is like you draw two strokes using static rendeer and the intersection part becomes darker.
// Set the opacity of the RootContainerVisual of the whole incremental stroke as color.A/255.0 and override
// the alpha value of the color we send to mil for rendering.
if (!si.DrawingAttributes.IsHighlighter)
{
si.StrokeCV.Opacity = si.Opacity;
}
_mainRawInkContainerVisual.Children.Add(si.StrokeCV);
}
// Create new visual and render the geometry into it
DrawingVisual visual = new DrawingVisual();
DrawingContext drawingContext = visual.RenderOpen();
try
{
OnDraw(drawingContext, stylusPoints, strokeGeometry, si.FillBrush);
}
finally
{
drawingContext.Close();
}
// Now add it to the visual tree (making sure we still have StrokeCV after
// onDraw called above).
if (si.StrokeCV != null)
{
si.StrokeCV.Children.Add(visual);
}
}
else
{
DynamicRendererThreadManager renderingThread = _renderingThread; // keep it alive
Dispatcher drDispatcher = renderingThread != null ? renderingThread.ThreadDispatcher : null;
// Only try to render if we get a ref on the rendering thread.
if (drDispatcher != null)
{
// We are on a pen thread so marshal this call to our inking thread.
drDispatcher.BeginInvoke(DispatcherPriority.Send,
(DispatcherOperationCallback) delegate(object unused)
{
SolidColorBrush fillBrush = si.FillBrush;
// Make sure this stroke is not aborted
if (fillBrush != null)
{
// See if we need to create a new container visual for the stroke.
if (si.StrokeRTICV == null)
{
// Create new container visual for this stroke and add our incremental rendering visual to it.
si.StrokeRTICV = new ContainerVisual();
// NTRAID#WINOS-1133229-2005/04/27-XIAOTU: two incrementally rendered stroke segments blend together
// at the rendering point location, thus the alpha value at those locations are higher than the set value.
// This is like you draw two strokes using static rendeer and the intersection part becomes darker.
// Set the opacity of the RootContainerVisual of the whole incremental stroke as color.A/255.0 and override
// the alpha value of the color we send to mil for rendering.
if (!si.DrawingAttributes.IsHighlighter)
{
si.StrokeRTICV.Opacity = si.Opacity;
}
((ContainerVisual)si.StrokeHV.VisualTarget.RootVisual).Children.Add(si.StrokeRTICV);
}
// Create new visual and render the geometry into it
DrawingVisual visual = new DrawingVisual();
DrawingContext drawingContext = visual.RenderOpen();
try
{
OnDraw(drawingContext, stylusPoints, strokeGeometry, fillBrush);
}
finally
{
drawingContext.Close();
}
// Add it to the visual tree
si.StrokeRTICV.Children.Add(visual);
}
return null;
},
null);
}
}
}
}
/////////////////////////////////////////////////////////////////////
/// <summary>
/// [TBS]
/// </summary>
protected override void OnStylusDown(RawStylusInput rawStylusInput)
{
// Only allow inking if someone has queried our RootVisual.
if (_mainContainerVisual != null)
{
StrokeInfo si;
lock(__siLock)
{
si = FindStrokeInfo(rawStylusInput.Timestamp);
// If we find we are already in the middle of stroke then bail out.
// Can only ink with one stylus at a time.
if (si != null)
{
return;
}
si = new StrokeInfo(DrawingAttributes, rawStylusInput.StylusDeviceId, rawStylusInput.Timestamp, GetCurrentHostVisual());
_strokeInfoList.Add(si);
}
rawStylusInput.NotifyWhenProcessed(si);
RenderPackets(rawStylusInput.GetStylusPoints(), si);
}
}
void RemoveDynamicRendererVisualAndNotifyWhenDone(StrokeInfo si)
{
if (si != null)
{
DynamicRendererThreadManager renderingThread = _renderingThread; // Keep it alive
if (renderingThread != null)
{
// We are being called by the main UI thread, so marshal over to
// the inking thread before cleaning up the stroke visual.
renderingThread.ThreadDispatcher.BeginInvoke(DispatcherPriority.Send,
(DispatcherOperationCallback)delegate(object unused)
{
if (si.StrokeRTICV != null)
{
// Now wait till this is rendered and then notify UI thread.
if (_onDRThreadRenderComplete == null)
{
_onDRThreadRenderComplete = new EventHandler(OnDRThreadRenderComplete);
}
// Add to list to transact.
_renderCompleteDRThreadStrokeInfoList.Enqueue(si);
// See if we are already waiting for a removed stroke to be rendered.
// If we aren't then remove visuals and wait for it to be rendered.
// Otherwise we'll do the work when the current stroke has been removed.
if (!_waitingForDRThreadRenderComplete)
{
((ContainerVisual)si.StrokeHV.VisualTarget.RootVisual).Children.Remove(si.StrokeRTICV);
si.StrokeRTICV = null;
// hook up render complete notification for one time then unhook.
MediaContext.From(renderingThread.ThreadDispatcher).RenderComplete += _onDRThreadRenderComplete;
_waitingForDRThreadRenderComplete = true;
}
}
else
{
// Nothing to transition so just say we're done!
NotifyAppOfDRThreadRenderComplete(si);
}
return null;
},
null);
}
}
}
internal void RemoveStrokeInfoRef(StrokeInfo si)
{
_strokeInfoList.Remove(si);
}
/////////////////////////////////////////////////////////////////////
/// <summary>
/// Reset will stop the current strokes being dynamically rendered
/// and start a new stroke with the packets passed in. Specified StylusDevice
/// must be in down position when calling this method.
/// Only call from application dispatcher.
/// </summary>
/// <param name="stylusDevice"></param>
/// <param name="stylusPoints"></param>
public virtual void Reset(StylusDevice stylusDevice, StylusPointCollection stylusPoints)
{
// NOTE: stylusDevice == null means the mouse device.
// Nothing to do if root visual not queried or not hookup up to element yet.
if (_mainContainerVisual == null || _applicationDispatcher == null || !IsActiveForInput)
return;
// Ensure on UIContext.
_applicationDispatcher.VerifyAccess();
// Make sure the stylusdevice specified (or mouse if null stylusdevice) is currently in
// down state!
bool inAir = (stylusDevice != null) ?
stylusDevice.InAir :
Mouse.PrimaryDevice.LeftButton == MouseButtonState.Released;
if (inAir)
{
throw new ArgumentException(SR.Get(SRID.Stylus_MustBeDownToCallReset), "stylusDevice");
}
// Avoid reentrancy due to lock() call.
using(_applicationDispatcher.DisableProcessing())
{
lock(__siLock)
{
AbortAllStrokes(); // stop any current inking strokes
// Now create new si and insert it in the list.
StrokeInfo si = new StrokeInfo(DrawingAttributes,
(stylusDevice != null) ? stylusDevice.Id : 0,
Environment.TickCount, GetCurrentHostVisual());
_strokeInfoList.Add(si);
si.IsReset = true;
if (stylusPoints != null)
{
RenderPackets(stylusPoints, si); // do this inside of lock to make sure this renders first.
}
}
}
}
internal void AddStrokeInfoRef(StrokeInfo si)
{
_strokeInfoList.Add(si);
}
void RemoveStrokeInfo(StrokeInfo si)
{
lock(__siLock)
{
_strokeInfoList.Remove(si);
}
}
// Removes ref from DynamicRendererHostVisual.
void TransitionComplete(StrokeInfo si)
{
// make sure lock does not cause reentrancy on application thread!
using(_applicationDispatcher.DisableProcessing())
{
lock(__siLock)
{
si.StrokeHV.RemoveStrokeInfoRef(si);
}
}
}
/// <summary>
/// Check whether a certain percentage of the stroke is within the lasso
/// </summary>
/// <param name="lassoPoints"></param>
/// <param name="percentageWithinLasso"></param>
/// <returns></returns>
public bool HitTest(IEnumerable<Point> lassoPoints, int percentageWithinLasso)
{
if (lassoPoints == null)
{
throw new System.ArgumentNullException("lassoPoints");
}
if ((percentageWithinLasso < 0) || (percentageWithinLasso > 100))
{
throw new System.ArgumentOutOfRangeException("percentageWithinLasso");
}
if (percentageWithinLasso == 0)
{
return true;
}
StrokeInfo strokeInfo = null;
try
{
strokeInfo = new StrokeInfo(this);
StylusPointCollection stylusPoints = strokeInfo.StylusPoints;
double target = strokeInfo.TotalWeight * percentageWithinLasso / 100.0f - PercentageTolerance;
Lasso lasso = new SingleLoopLasso();
lasso.AddPoints(lassoPoints);
for (int i = 0; i < stylusPoints.Count; i++)
{
if (true == lasso.Contains((Point)stylusPoints[i]))
{
target -= strokeInfo.GetPointWeight(i);
if (DoubleUtil.LessThan(target, 0f))
{
return true;
}
}
}
return false;
}
finally
{
if (strokeInfo != null)
{
//detach from event handlers, or else we leak.
strokeInfo.Detach();
}
}
}
/// <summary>
/// Check whether a certain percentage of the stroke is within the Rect passed in.
/// </summary>
/// <param name="bounds"></param>
/// <param name="percentageWithinBounds"></param>
/// <returns></returns>
public bool HitTest(Rect bounds, int percentageWithinBounds)
{
if ((percentageWithinBounds < 0) || (percentageWithinBounds > 100))
{
throw new System.ArgumentOutOfRangeException("percentageWithinBounds");
}
if (percentageWithinBounds == 0)
{
return true;
}
StrokeInfo strokeInfo = null;
try
{
strokeInfo = new StrokeInfo(this);
StylusPointCollection stylusPoints = strokeInfo.StylusPoints;
double target = strokeInfo.TotalWeight * percentageWithinBounds / 100.0f - PercentageTolerance;
for (int i = 0; i < stylusPoints.Count; i++)
{
if (true == bounds.Contains((Point)stylusPoints[i]))
{
target -= strokeInfo.GetPointWeight(i);
if (DoubleUtil.LessThanOrClose(target, 0d))
{
return true;
}
}
}
return false;
}
finally
{
if (strokeInfo != null)
{
//detach from event handlers, or else we leak.
strokeInfo.Detach();
}
}
}