private bool sendLevCmd(byte cmd, byte[] values)
{
byte[] TransmitData = LEV_UART_Packet_Forming_and_Decoding.CMD_Forming_For_Transmitting(cmd, values);
if (gSerialComPort.IsOpen)
{
Log(LogMsgType.Outgoing, "Transmitting: " + MassUtilityClass.ByteArrayToHexString(TransmitData, true) + Environment.NewLine);
// Send the binary data out the port
gSerialComPort.Write(TransmitData, 0, TransmitData.Length);
return(true);
}
else
{
Log(LogMsgType.Error, "Could not Transmit data: " + MassUtilityClass.ByteArrayToHexString(TransmitData, true) + Environment.NewLine);
return(false);
}
}
public string getHexStructureLine()
{
List <byte> hexLine = new List <byte>();
string hexStructureLine = ":";
hexLine.Add((byte)HexData.Length);
byte[] add = BitConverter.GetBytes(Address);
hexLine.Add(add[1]);
hexLine.Add(add[0]);
hexLine.Add(CheckCode);
hexLine.AddRange(HexData);
byte[] computeChkSumData = hexLine.ToArray();
byte computeChdSum = MassUtilityClass.CalculateHexChecksum8(computeChkSumData);
hexLine.Add(computeChdSum);
computeChkSumData = hexLine.ToArray();
hexStructureLine += MassUtilityClass.ByteArrayToHexString(computeChkSumData, false);
return(hexStructureLine);
}
public bool Transforming()
{
bool readyForBurning = false;
bool burning = false;
getModifyData();
BarCodeID = MassUtilityClass.ByteArrayToString(BarCode1_Data) + MassUtilityClass.ByteArrayToString(BarCode2_Data);
//BarCodeID = Regex.Replace(BarCodeID, @"[\W]+", ""); //移除所有特殊字元
BarCodeID = Regex.Replace(BarCodeID, @"[^a-zA-Z_0-9]", ""); //移除所有特殊字元
//TransforHexFile = "_" + BarCodeID.Replace('@', '_') + "_" + DateTime.Now.ToString("yyyyMMdd_HHmmss") + ".hex";
TransforHexFile = "_" + BarCodeID + "_" + DateTime.Now.ToString("yyyyMMdd_HHmmss") + ".hex";
using (StreamWriter sw = new StreamWriter(@".\Log\Org_DataLog_" + DateTime.Now.ToString("yyyyMMdd_HHmmss_") + TransforHexFile + ".txt"))
{
sw.WriteLine("[OneWire_SystemData]");
sw.WriteLine(MassUtilityClass.ByteArrayToHexString(OneWire_SystemData, true));
sw.WriteLine("[OneWire_EEPROM]");
sw.WriteLine(MassUtilityClass.ByteArrayToHexString(OneWire_EEPROM, true));
sw.Close();
}
bool flag1;
HexFileDocument hexFD;
try
{
hexFD = new HexFileDocument();
//flag1 = hexFD.openHexFile(Path.Combine(HexTemplatePath, HexTemplateROMFile));
flag1 = hexFD.openHexFile(Path.Combine(HexDirectoryName, HexTemplateROMFile));
}
catch (Exception ex)
{
MessageBox.Show("HexFileDocument: " + ex.ToString(), "HexFileDocument", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
if (flag1)
{
hexFD.setHexData((UInt16)(0x1000 + Cal_Offset), Cal_Data);
hexFD.setHexData((UInt16)(0x1000 + MaSN_Offset), MaSN_Data);
hexFD.setHexData((UInt16)(0x1000 + BarCode1_Offset), BarCode1_Data);
hexFD.setHexData((UInt16)(0x1000 + BarCode2_Offset), BarCode2_Data);
try
{
hexFD.SaveHexFile(Path.Combine(HexTransformPath, TransforHexFile));
readyForBurning = true;
}
catch (Exception ex)
{
MessageBox.Show("SaveHexFile: " + ex.ToString(), "SaveHexFile", MessageBoxButtons.OK, MessageBoxIcon.Warning);
readyForBurning = false;
}
if (!readyForBurning)
{
return(false);
}
burning = ProgramingHEX(BurningType.Unlock, Path.Combine(HexTemplatePath, HexTemplateUnlockFile));
if (!burning)
{
MessageBox.Show("Failure." + Environment.NewLine +
"Programing Unlock HEX File :" + Path.Combine(HexTemplatePath, HexTemplateUnlockFile) + Environment.NewLine +
"Please Check Connection and ReTry again.", "Programing Unlock HEX File", MessageBoxButtons.OK, MessageBoxIcon.Warning);
burning = ProgramingHEX(BurningType.Unlock, Path.Combine(HexTemplatePath, HexTemplateUnlockFile));
if (!burning)
{
MessageBox.Show("Failure.", "Programing Unlock HEX File", MessageBoxButtons.OK, MessageBoxIcon.Error); return(false);
}
}
burning = ProgramingHEX(BurningType.ROM, Path.Combine(HexTransformPath, TransforHexFile));
if (!burning)
{
MessageBox.Show("Failure." + Environment.NewLine +
"Programing ROM HEX File :" + Path.Combine(HexTransformPath, TransforHexFile) + Environment.NewLine +
"Please Check Connection and ReTry again.", "Programing ROM HEX File", MessageBoxButtons.OK, MessageBoxIcon.Warning);
burning = ProgramingHEX(BurningType.ROM, Path.Combine(HexTransformPath, TransforHexFile));
if (!burning)
{
MessageBox.Show("Failure.", "Programing ROM HEX File", MessageBoxButtons.OK, MessageBoxIcon.Error); return(false);
}
}
//burning = ProgramingHEX(BurningType.Prg, Path.Combine(HexTemplatePath, HexTemplatePRGFile));
burning = ProgramingHEX(BurningType.Prg, Path.Combine(HexDirectoryName, HexTemplatePRGFile));
if (!burning)
{
MessageBox.Show("Failure." + Environment.NewLine +
//"Programing PROGRAM HEX File :" + Path.Combine(HexTemplatePath, HexTemplatePRGFile) + Environment.NewLine +
"Programing PROGRAM HEX File :" + Path.Combine(HexDirectoryName, HexTemplatePRGFile) + Environment.NewLine +
"Please Check Connection and ReTry again.", "Programing PROGRAM HEX File", MessageBoxButtons.OK, MessageBoxIcon.Warning);
//burning = ProgramingHEX(BurningType.Prg, Path.Combine(HexTemplatePath, HexTemplatePRGFile));
burning = ProgramingHEX(BurningType.Prg, Path.Combine(HexDirectoryName, HexTemplatePRGFile));
if (!burning)
{
MessageBox.Show("Failure.", "Programing PROGRAM HEX File", MessageBoxButtons.OK, MessageBoxIcon.Error); return(false);
}
}
//burning = ProgramingHEX(BurningType.Lock, Path.Combine(HexTemplatePath, HexTemplateLockFile));
//if (!burning)
//{
// MessageBox.Show("Failure." + Environment.NewLine +
// "Programing Lock HEX File :" + Path.Combine(HexTemplatePath, HexTemplateLockFile) + Environment.NewLine +
// "Please Check Connection and ReTry again.", "Programing Lock HEX File", MessageBoxButtons.OK, MessageBoxIcon.Warning);
// //burning = ProgramingHEX(BurningType.Lock, Path.Combine(HexTemplatePath, HexTemplateLockFile));
// if (!burning) { MessageBox.Show("Failure.", "Programing Lock HEX File", MessageBoxButtons.OK, MessageBoxIcon.Error); return false; }
//}
return(true);
}
return(false);
}
private void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
// If the com port has been closed, do nothing
if (!gSerialComPort.IsOpen)
{
return;
}
// Obtain the number of bytes waiting in the port's buffer
int readbytes = gSerialComPort.BytesToRead;
if (readbytes > 0)
{
// Create a byte array buffer to hold the incoming data
byte[] buffer = new byte[readbytes];
// Read the data from the port and store it in our buffer
gSerialComPort.Read(buffer, 0, readbytes);
//Log(LogMsgType.Dummy, "RAW Data: " + MassUtilityClass.ByteArrayToHexString(buffer));
//Log(LogMsgType.Dummy, "{receive bytes: " + buffer.Length + "}" + Environment.NewLine);
ReceivedComPortBytesList.AddRange(buffer);
List <LEV_One_Wire_Receiving_Packet_Decoding.Received_Data_Group> outDataGroupList;
List <byte[]> outDataList;
LEV_One_Wire_Receiving_Packet_Decoding.Packet_Decoding_To_Group_And_Clear_List(
ref ReceivedComPortBytesList, out outDataGroupList, out outDataList);
if ((outDataGroupList.Count >= 1) && (outDataGroupList.Count == outDataList.Count))
{
for (int i = 0; i < outDataGroupList.Count; i++)
{
if (outDataGroupList[i] == LEV_One_Wire_Receiving_Packet_Decoding.Received_Data_Group.OneWire_SystemData_Group)
{
Log(LogMsgType.Incoming, "Receiving OneWire_SystemData_Group: " +
MassUtilityClass.ByteArrayToHexString(outDataList[i], true) + Environment.NewLine);
if (gWaitReceiveData)
{
gGetStatusReceiveData = true;
RDTrans.setOneWire_SystemData(outDataList[i]);
}
}
else if (outDataGroupList[i] == LEV_One_Wire_Receiving_Packet_Decoding.Received_Data_Group.OneWire_EEPROM_Group)
{
Log(LogMsgType.Incoming, "Receiving OneWire_EEPROM_Group: " +
MassUtilityClass.ByteArrayToHexString(outDataList[i], true) + Environment.NewLine);
if (gWaitReceiveData)
{
gGetEEPROMReceiveData = true;
RDTrans.setOneWire_EEPROM(outDataList[i]);
}
}
else
{
//Log(LogMsgType.Error, "[Fail] None OneWire_Data : " + outDataGroupList[i] + Environment.NewLine);
//Log(LogMsgType.Error, "Group data : " + MassUtilityClass.ByteArrayToHexString(outDataList[i]) + Environment.NewLine);
}
}
if (gGetEEPROMReceiveData && gGetStatusReceiveData)
{
aTimer.Enabled = false;
gWaitReceiveData = false;
gGetEEPROMReceiveData = false;
gGetStatusReceiveData = false;
//RDTransForm.Show(this);
bool flag = RDTrans.Transforming();
if (flag)
{
UpdateLabelUI("Success", Color.LightGreen, Result_label);
MessageBox.Show("BarCodeID :" + Environment.NewLine +
RDTrans.BarCodeID + Environment.NewLine +
"Programming Success.");
}
else
{
UpdateLabelUI("Failure", Color.Red, Result_label);
MessageBox.Show("BarCodeID :" + Environment.NewLine +
RDTrans.BarCodeID + Environment.NewLine +
"Programming Fail.");
}
}
}
}
}