public void ResetControlVars()
{
HVSteps = new List <HVStatus>();
xp = null;
hvp = IntegrationHelpers.GetCurrentHVCalibrationParams(NC.App.Opstate.Measurement.Detectors[0]);
hvCalibPoint = hvMinCalibPoint = hvp.MinHV; // starting point for stepping
hvMaxCalibPoint = hvp.MaxHV;
hvStep = hvp.Step;
hvDelayms = hvp.DelayMS;
if (hvp.HVDuration <= hvp.DelayMS / 1000) // seconds to milliseconds
{
hvp.DelayMS = (hvp.HVDuration / 1000) + 1000;
hvDelayms = hvp.DelayMS;
ctrllog.TraceEvent(LogLevels.Warning, 604, "HV delay modified to {0} seconds because the HV cycle duration ({1} sec) must be less than HV command delay", hvp.DelayMS * 1000, hvp.HVDuration);
}
hvx = false; // excel monitor flag
}
public void ResetControlVars()
{
HVSteps = new List<HVStatus>();
xp = null;
hvp = IntegrationHelpers.GetCurrentHVCalibrationParams(NC.App.Opstate.Measurement.Detectors[0]);
hvCalibPoint = hvMinCalibPoint = hvp.MinHV; // starting point for stepping
hvMaxCalibPoint = hvp.MaxHV;
hvStep = hvp.Step;
hvDelayms = hvp.DelayMS;
if (hvp.HVDuration <= hvp.DelayMS / 1000) // seconds to milliseconds
{
hvp.DelayMS = (hvp.HVDuration/1000) + 1000;
hvDelayms = hvp.DelayMS;
ctrllog.TraceEvent(LogLevels.Warning, 604, "HV delay modified to {0} seconds because the HV cycle duration ({1} sec) must be less than HV command delay", hvp.DelayMS * 1000, hvp.HVDuration);
}
hvx = false; // excel monitor flag
}
// meant to support SR and LM
public bool HVCalibRun()
{
// only for first active instrument.
Instrument inst = Instruments.Active.FirstActive(); // control.FirstActiveInstrument(typeof(LMInstrument));
if (inst == null)
{
ctrllog.TraceInformation("No active instruments for HV calibration. . .");
return(false);
}
if (hvx)
{
if (xp == null)
{
xp = new HVExcel(ctrllog);
xp.ShowWB();
xp.AddHeaderRow(typeof(SimpleHVReport.HVVals));
}
}
instId = inst.id.DetectorId + "-" + inst.id.SRType.ToString();
if (hvCalibPoint <= hvMaxCalibPoint)
{
if (DAQControl.CurState.IsQuitRequested) // leave and do not finish calibration
{
ctrllog.TraceInformation("HV calibration cancelled");
inst.DAQState = DAQInstrState.Online;
DAQControl.CurState.State = DAQInstrState.Online;
ctrllog.Flush();
}
else
{
if (inst.id.SRType.IsListMode())
{
if (inst.id.SRType == InstrType.PTR32)
{
inst.StartHVCalibration(hvCalibPoint, TimeSpan.FromSeconds(hvp.HVDuration));
}
else
{
int LM = control.FirstActiveIndexOf(inst);
DAQControl.LMMMComm.FormatAndSendLMMMCommand(LMMMLingo.Tokens.hvprep, hvCalibPoint, LM);
Thread.Sleep(hvDelayms); // wait for HV to settle, nominally 2 seconds
DAQControl.LMMMComm.FormatAndSendLMMMCommand(LMMMLingo.Tokens.hvcalib, 0, LM);
}
}
else
{
// (re)init the SR
if (hvCalibPoint == hvMinCalibPoint)
{
control.SRWrangler.StartSRActionAndWait(inst.id, SRTakeDataHandler.SROp.InitializeSR, hvCalibPoint, hvp.HVDuration);
}
else
{ // reinit the SR to the next step up in the plateaux
control.SRWrangler.StartSRActionAndWait(inst.id, SRTakeDataHandler.SROp.ReInitializeSR, hvCalibPoint, hvp.HVDuration);
}
// do the run
int status = control.SRWrangler.StartSRActionAndWait(inst.id, SRTakeDataHandler.SROp.StartSRDAQ); // NEXT: check if pending here is going to be an issue
if (status == INCCSR.MEAS_CONTINUE) // the SR started
{
control.SRWrangler.SetAction(inst.id, SRTakeDataHandler.SROp.WaitForResults); // event handler will pick up results when the internal timer polling in the thread detects results and fires the event
}
}
hvCalibPoint += hvStep;
}
}
else // we are done
{
ctrllog.TraceInformation("HV calibration complete. . .");
inst.DAQState = DAQInstrState.Online;
DAQControl.CurState.State = DAQInstrState.Online;
ctrllog.Flush();
inst.PendingComplete(); // each instr must complete for the waitall to move forward
}
return(true);
}
// meant to support SR and LM
public bool HVCalibRun()
{
// only for first active instrument.
Instrument inst = Instruments.Active.FirstActive(); // control.FirstActiveInstrument(typeof(LMInstrument));
if (inst == null)
{
ctrllog.TraceInformation("No active instruments for HV calibration. . .");
return false;
}
if (hvx)
{
if (xp == null)
{
xp = new HVExcel(ctrllog);
xp.ShowWB();
xp.AddHeaderRow(typeof(SimpleHVReport.HVVals));
}
}
instId = inst.id.DetectorId + "-" + inst.id.SRType.ToString();
if (hvCalibPoint <= hvMaxCalibPoint)
{
if (DAQControl.CurState.IsQuitRequested) // leave and do not finish calibration
{
ctrllog.TraceInformation("HV calibration cancelled");
inst.DAQState = DAQInstrState.Online;
DAQControl.CurState.State = DAQInstrState.Online;
ctrllog.Flush();
}
else
{
if (inst.id.SRType.IsListMode())
{
if (inst.id.SRType == InstrType.PTR32) {
inst.StartHVCalibration(hvCalibPoint, TimeSpan.FromSeconds(hvp.HVDuration));
}
else {
int LM = control.FirstActiveIndexOf(inst);
DAQControl.LMMMComm.FormatAndSendLMMMCommand(LMMMLingo.Tokens.hvprep, hvCalibPoint, LM);
Thread.Sleep(hvDelayms); // wait for HV to settle, nominally 2 seconds
DAQControl.LMMMComm.FormatAndSendLMMMCommand(LMMMLingo.Tokens.hvcalib, 0, LM);
}
}
else
{
// (re)init the SR
if (hvCalibPoint == hvMinCalibPoint)
control.SRWrangler.StartSRActionAndWait(inst.id, SRTakeDataHandler.SROp.InitializeSR, hvCalibPoint, hvp.HVDuration);
else
{ // reinit the SR to the next step up in the plateaux
control.SRWrangler.StartSRActionAndWait(inst.id, SRTakeDataHandler.SROp.ReInitializeSR, hvCalibPoint, hvp.HVDuration);
}
// do the run
int status = control.SRWrangler.StartSRActionAndWait(inst.id, SRTakeDataHandler.SROp.StartSRDAQ); // NEXT: check if pending here is going to be an issue
if (status == INCCSR.MEAS_CONTINUE) // the SR started
{
control.SRWrangler.SetAction(inst.id, SRTakeDataHandler.SROp.WaitForResults); // event handler will pick up results when the internal timer polling in the thread detects results and fires the event
}
}
hvCalibPoint += hvStep;
}
}
else // we are done
{
ctrllog.TraceInformation("HV calibration complete. . .");
inst.DAQState = DAQInstrState.Online;
DAQControl.CurState.State = DAQInstrState.Online;
ctrllog.Flush();
inst.PendingComplete(); // each instr must complete for the waitall to move forward
}
return true;
}