/// <summary>
/// Determines the starting part in the failure.
/// </summary>
private void PrepareStartingPart()
{
// Find engines
List <Part> activeEngineParts = activeVessel.GetActiveParts().Where(o => KLFUtils.PartIsActiveEngine(o)).ToList();
// If there are no active engines, skip this attempt.
if (activeEngineParts.Count == 0)
{
return;
}
// Determine the starting part.
int startingPartIndex = KLFUtils.RNG.Next(0, activeEngineParts.Count);
startingPart = activeEngineParts[startingPartIndex];
// Get the engine module for the part.
startingPartEngineModule = startingPart.Modules.OfType <ModuleEngines>().Single();
// Setup tick information for the part explosion loop.
ticksBetweenPartExplosions = (int)(KLFUtils.GameTicksPerSecond * KLFSettings.Instance.DelayBetweenPartFailures);
ticksSinceFailureStart = 0;
thrustOverload = 0;
}
/// <summary>
/// Determines the starting part in the failure.
/// </summary>
private void PrepareStartingPart()
{
Log.Info("PrepareStartingPart");
// Find engines
bool b = !experimentalPartFailure;
List <Part> activeEngineParts = activeVessel.GetActiveParts().Where(o => KLFUtils.PartIsActiveEngine(o, b)).ToList();
List <Part> radialDecouplers = activeVessel.Parts.Where(o => KLFUtils.PartIsRadialDecoupler(o, b)).ToList();
List <Part> controlSurfaces = activeVessel.Parts.Where(o => KLFUtils.PartIsControlSurface(o, b)).ToList();
List <CompoundPart> strutsAndFuelLines = activeVessel.Parts.OfType <CompoundPart>().Where(o => KLFUtils.PartIsStrutOrFuelLine(o, b)).ToList();
int cnt = activeEngineParts.Count + radialDecouplers.Count + controlSurfaces.Count + strutsAndFuelLines.Count;
// If there are no active engines or radial decouplers, skip this attempt.
if (cnt == 0)
{
return;
}
// Determine the starting part.
int startingPartIndex = KLFUtils.RNG.Next(0, cnt);
Log.Info("activeEngineParts.Count: " + activeEngineParts.Count.ToString() + " radialDecouplers.Count: " + radialDecouplers.Count.ToString() +
" controlSurfaces.Count: " + controlSurfaces.Count.ToString() + " strutsAndFuelLines.Count: " + strutsAndFuelLines.Count);
Log.Info("startingPartIndex: " + startingPartIndex.ToString());
// for debugging only: startingPartIndex = activeEngineParts.Count;
int offset = 0;
if (startingPartIndex < activeEngineParts.Count)
{
startingPart = activeEngineParts[startingPartIndex];
failureType = FailureType.engine;
// Get the engine module for the part.
foreach (ModuleEngines engineModule in startingPart.Modules.OfType <ModuleEngines>().ToList())
{
if (engineModule.enabled && engineModule.currentThrottle > 0)
{
startingPartEngineModule = engineModule;
}
}
}
offset += activeEngineParts.Count;
if (startingPartIndex >= offset && startingPartIndex < offset + radialDecouplers.Count)
{
startingPart = radialDecouplers[startingPartIndex - offset];
failureType = FailureType.radialDecoupler;
decouplerForceCnt = 0;
}
offset += radialDecouplers.Count;
if (startingPartIndex >= offset && startingPartIndex < offset + controlSurfaces.Count)
{
startingPart = controlSurfaces[startingPartIndex - offset];
failureType = FailureType.controlSurface;
decouplerForceCnt = 0;
}
offset += controlSurfaces.Count;
if (startingPartIndex >= offset && startingPartIndex < offset + strutsAndFuelLines.Count)
{
startingPart = strutsAndFuelLines[startingPartIndex - offset];
failureType = FailureType.strutOrFuelLine;
decouplerForceCnt = 0;
}
#if false
if (startingPartIndex >= activeEngineParts.Count)
{
startingPart = radialDecouplers[startingPartIndex - activeEngineParts.Count];
failureType = FailureType.radialDecoupler;
decouplerForceCnt = 0;
}
else
{
startingPart = activeEngineParts[startingPartIndex];
failureType = FailureType.engine;
// Get the engine module for the part.
startingPartEngineModule = startingPart.Modules.OfType <ModuleEngines>().Single();
}
#endif
// Setup tick information for the part explosion loop.
ticksBetweenPartFailures = (int)(KLFUtils.GameTicksPerSecond * KLFSettings.Instance.DelayBetweenPartFailures);
if (ticksBetweenPartFailures == 0)
{
ticksBetweenPartFailures = (int)(KLFUtils.GameTicksPerSecond / 20f + 1f);
}
ticksSinceFailureStart = 0;
thrustOverload = 0;
underThrustStart = 100f;
underThrustEnd = 100f;
scienceAfterFailure = CalcScienceReward(activeVesselCost, activeVessel, startingPart);
preFailureWarningTime = KLFSettings.Instance.PreFailureWarningTime;
if (KLFSettings.Instance.TimeRandomness > 0)
{
float f = UnityEngine.Random.Range(0, KLFSettings.Instance.TimeRandomness) - KLFSettings.Instance.TimeRandomness / 2f;
preFailureWarningTime += f;
}
}
/// <summary>
/// Determines the starting part in the failure.
/// </summary>
private void PrepareStartingPart()
{
Log.Info("PrepareStartingPart");
// Find engines
List <Part> activeEngineParts = activeVessel.GetActiveParts().Where(o => KLFUtils.PartIsActiveEngine(o)).ToList();
List <Part> radialDecouplers = activeVessel.Parts.Where(o => KLFUtils.PartIsRadialDecoupler(o)).ToList();
List <Part> controlSurfaces = activeVessel.Parts.Where(o => KLFUtils.PartIsControlSurface(o)).ToList();
List <CompoundPart> strutsAndFuelLines = activeVessel.Parts.OfType <CompoundPart>().Where(o => KLFUtils.PartIsStrutOrFuelLine(o)).ToList();
int cnt = activeEngineParts.Count + radialDecouplers.Count + controlSurfaces.Count + strutsAndFuelLines.Count;
// If there are no active engines or radial decouplers, skip this attempt.
if (cnt == 0)
{
return;
}
// Determine the starting part.
int startingPartIndex = KLFUtils.RNG.Next(0, cnt);
Log.Info("activeEngineParts.Count: " + activeEngineParts.Count.ToString() + " radialDecouplers.Count: " + radialDecouplers.Count.ToString() +
" controlSurfaces.Count: " + controlSurfaces.Count.ToString() + " strutsAndFuelLines.Count: " + strutsAndFuelLines.Count);
Log.Info("startingPartIndex: " + startingPartIndex.ToString());
// for debugging only: startingPartIndex = activeEngineParts.Count;
int offset = 0;
if (startingPartIndex < activeEngineParts.Count)
{
startingPart = activeEngineParts[startingPartIndex];
failureType = FailureType.engine;
// Get the engine module for the part.
startingPartEngineModule = startingPart.Modules.OfType <ModuleEngines>().Single();
}
offset += activeEngineParts.Count;
if (startingPartIndex >= offset && startingPartIndex < offset + radialDecouplers.Count)
{
startingPart = radialDecouplers[startingPartIndex - offset];
failureType = FailureType.radialDecoupler;
decouplerForceCnt = 0;
}
offset += radialDecouplers.Count;
if (startingPartIndex >= offset && startingPartIndex < offset + controlSurfaces.Count)
{
startingPart = controlSurfaces[startingPartIndex - offset];
failureType = FailureType.controlSurface;
decouplerForceCnt = 0;
}
offset += controlSurfaces.Count;
if (startingPartIndex >= offset && startingPartIndex < offset + strutsAndFuelLines.Count)
{
startingPart = strutsAndFuelLines[startingPartIndex - offset];
failureType = FailureType.strutOrFuelLine;
decouplerForceCnt = 0;
}
#if false
if (startingPartIndex >= activeEngineParts.Count)
{
startingPart = radialDecouplers[startingPartIndex - activeEngineParts.Count];
failureType = FailureType.radialDecoupler;
decouplerForceCnt = 0;
}
else
{
startingPart = activeEngineParts[startingPartIndex];
failureType = FailureType.engine;
// Get the engine module for the part.
startingPartEngineModule = startingPart.Modules.OfType <ModuleEngines>().Single();
}
#endif
// Setup tick information for the part explosion loop.
ticksBetweenPartFailures = (int)(KLFUtils.GameTicksPerSecond * KLFSettings.Instance.DelayBetweenPartFailures);
ticksSinceFailureStart = 0;
thrustOverload = 0;
underThrustStart = 100f;
underThrustEnd = 100f;
}
public static bool ExperimentalPartsPresentAndActive()
{
if (HighLogic.CurrentGame.Mode == Game.Modes.CAREER)
{
return(false);
}
List <Part> activeEngineParts = FlightGlobals.ActiveVessel.GetActiveParts().Where(o => KLFUtils.PartIsActiveEngine(o, false)).ToList();
List <Part> radialDecouplers = FlightGlobals.ActiveVessel.Parts.Where(o => KLFUtils.PartIsRadialDecoupler(o, false)).ToList();
List <Part> controlSurfaces = FlightGlobals.ActiveVessel.Parts.Where(o => KLFUtils.PartIsControlSurface(o, false)).ToList();
List <CompoundPart> strutsAndFuelLines = FlightGlobals.ActiveVessel.Parts.OfType <CompoundPart>().Where(o => KLFUtils.PartIsStrutOrFuelLine(o, false)).ToList();
int i = activeEngineParts.Count + radialDecouplers.Count + controlSurfaces.Count + strutsAndFuelLines.Count;
return(i > 0);
}