Ejemplo n.º 1
0
        private void loadIBNKJaiV2(BeBinaryReader instReader)
        {
            long anchor         = 0;
            var  BaseAddress    = instReader.BaseStream.Position;
            var  current_header = instReader.ReadUInt32();

            if (current_header != 0x49424e4b) // Check to see if it equals IBNK
            {
                Console.ForegroundColor = ConsoleColor.Red;
                Console.WriteLine("0x{0:X}", BaseAddress);
                throw new InvalidDataException("Scanned header is not an IBNK.");
            }

            var IBNKSize = instReader.ReadUInt32();

            id = instReader.ReadInt32();
            var flags = instReader.ReadUInt32();                  // usually 1, determines if the bank is melodic or used for sound effects. Usually the bank is melodic.

            instReader.BaseStream.Seek(0x10, SeekOrigin.Current); // Skip 16 bytes, always 0x00, please document if wrong.
            var i = 0;

            while (true)
            {
                anchor = instReader.BaseStream.Position; // Store current section base.
                i++;
                // Console.WriteLine("Iteration {0} 0x{1:X}", i,anchor);
                current_header = instReader.ReadUInt32();
                //  Console.WriteLine("GOT HD {0:X}", current_header);
                if (current_header == 0x00)
                {
                    break;                        // End of section.
                }
                else if (current_header < 0xFFFF) // Read below for explanation
                {
                    // I've noticed VERY RARELY, that the section pointer is wrong by two bytes. This sucks. So we check if it's less than two full bytes.
                    // If it is, we seek back 2 bytes then read again, and our alignment is fixed :).
                    // of course, this comes after our check to see if it's 0, which indicates end of section
                    instReader.BaseStream.Seek(-2, SeekOrigin.Current);
                    Console.WriteLine("[!] Misalignment detected in IBNK, new position 0x{0:X}", instReader.BaseStream.Position);
                    anchor         = instReader.BaseStream.Position; // 3/14/2019, i forgot this. It's S M R T to update your read base.
                    current_header = instReader.ReadUInt32();
                    Console.WriteLine("New header {0:X}", current_header);
                }
                var next_section = ReadJARCSizePointer(instReader); // if that works, go ahead and grab the 'pointer' to the next section.
                if (current_header < 0xFFFF)
                {
                    Console.WriteLine("Corrupt IBNK 0x{0:X}", BaseAddress);
                    break;
                }
                switch (current_header)
                {
                case 0x4F534354:                                            // OSCT
                case 0x52414E44:                                            // RAND
                case 0x454E5654:                                            // EVNT
                case 0x53454E53:                                            // SENS
                    instReader.BaseStream.Position = anchor + next_section; // Skip section.
                    break;

                case INST:
                {
                    var NewINST   = new Instrument();
                    var InstCount = instReader.ReadInt32();
                    NewINST.Keys = new InstrumentKey[0xF0];
                    for (int instid = 0; instid < InstCount; instid++)
                    {
                        current_header = instReader.ReadUInt32();
                        var iebase = instReader.BaseStream.Position;
                        if (current_header != Inst)
                        {
                            break;         // F**K.
                        }
                        NewINST.oscillator = instReader.ReadInt32();
                        NewINST.id         = instReader.ReadInt32();

                        instReader.ReadInt32();                 // cant figure out what these are.
                        var keyCounts = instReader.ReadInt32(); // How many key regions are in here.
                        int KeyHigh   = 0;
                        int KeyLow    = 0;
                        for (int k = 0; k < keyCounts; k++)
                        {
                            var NewKey = new InstrumentKey();
                            NewKey.keys = new InstrumentKeyVelocity[0x81];

                            byte key = instReader.ReadByte();                  // Read the key identifierr
                            KeyHigh = key;                                     // Set the highest key to what we just read.
                            instReader.BaseStream.Seek(3, SeekOrigin.Current); // 3 bytes, unused.
                            var VelocityRegionCount = instReader.ReadInt32();  // read the number of entries in the velocity region array\
                            if (VelocityRegionCount > 0x7F)
                            {
                                Console.WriteLine("Alignment is f****d, IBNK load aborted.");
                                Console.WriteLine("E: VelocityRegionCount is too thicc. {0} > 128", VelocityRegionCount);
                                Console.WriteLine("IBASE: 0x{0:X} + 0x{1:X} ({2:X})", anchor, iebase - anchor, (instReader.BaseStream.Position - anchor) - (iebase - anchor));

                                return;
                            }
                            for (int b = 0; b < VelocityRegionCount; b++)
                            {
                                var NewVelR = new InstrumentKeyVelocity();
                                int VelLow  = 0;
                                int VelHigh = 0;
                                {
                                    var velocity = instReader.ReadByte();              // The velocity of this key.
                                    VelHigh = velocity;
                                    instReader.BaseStream.Seek(3, SeekOrigin.Current); // Unused.
                                    NewVelR.velocity = velocity;
                                    NewVelR.wave     = instReader.ReadUInt16();        // This will be the ID of the wave inside of that wavesystem
                                    NewVelR.wsysid   = instReader.ReadUInt16();        // This will be the ID of the WAVESYSTEM that its in

                                    NewVelR.Volume = instReader.ReadSingle();          // Finetune, volume, float
                                    NewVelR.Pitch  = instReader.ReadSingle();          // finetune pitch, float.
                                    for (int idx = 0; idx < (VelHigh - VelLow); idx++) // See below for what this is doing
                                    {
                                        NewKey.keys[(VelLow + idx)] = NewVelR;
                                        NewKey.keys[127]            = NewVelR;
                                    }
                                    VelLow = VelHigh;
                                }
                            }
                            for (int idx = 0; idx < (KeyHigh - KeyLow); idx++) // The keys are gappy.
                            {
                                NewINST.Keys[(KeyLow + idx)] = NewKey;         // So we want to interpolate the previous keys across the empty ones, so that way it's a region
                                NewINST.Keys[127]            = NewKey;
                            }
                            KeyLow = KeyHigh;         // Set our new lowest key to the previous highest
                        }
                    }
                    instReader.BaseStream.Position = anchor + next_section;         // SAFETY.
                    break;
                }

                case PERC:

                    instReader.BaseStream.Position = anchor + next_section;
                    break;

                case 0x4C495354:                                            // LIST
                    instReader.BaseStream.Position = anchor + next_section; // Skip section
                    // Explanation: This is just a set of pointers relative to BaseAddress for the instruments, nothing special because we're
                    // already parsing them above.
                    break;

                default:
                    instReader.BaseStream.Position = anchor + next_section;     // Skip section.
                    break;
                }
            }
        }
Ejemplo n.º 2
0
        private void loadIBNKJaiV1(BeBinaryReader instReader)
        {
            long anchor         = 0;
            var  BaseAddress    = instReader.BaseStream.Position;
            var  current_header = 0u;

            current_header = instReader.ReadUInt32(); // read the first 4 byteas
            if (current_header != 0x49424e4b)         // Check to see if it equals IBNK
            {
                throw new InvalidDataException("Scanned header is not an IBNK.");
            }
            var size = instReader.ReadUInt32();

            id = instReader.ReadInt32();                          // Global virtual ID
            instReader.BaseStream.Seek(0x14, SeekOrigin.Current); // 0x14 bytes always blank
            current_header = instReader.ReadUInt32();             // We should be reading "BANK"
            for (int inst_id = 0; inst_id < 0xF0; inst_id++)
            {
                var inst_offset = instReader.ReadInt32();                       // Read the relative pointer to the instrument
                anchor = instReader.BaseStream.Position;                        // store the position to jump back into.
                if (inst_offset > 0)                                            // If we have a 0 offset, then the instrument is unassigned.
                {
                    instReader.BaseStream.Position = BaseAddress + inst_offset; // Seek to the offset of the instrument.
                    current_header = instReader.ReadUInt32();                   // Read the 4 byte identity of the instrument.
                    var NewINST = new Instrument();
                    NewINST.Keys = new InstrumentKey[0xF0];
                    switch (current_header)
                    {
                    case INST:
                    {
                        instReader.ReadUInt32();                  // The first 4 bytes following an instrument is always 0, for some reason.  Maybe reserved.
                        NewINST.Pitch  = instReader.ReadSingle(); // 4 byte float pitch
                        NewINST.Volume = instReader.ReadSingle(); // 4 byte float volume
                        /* Lots of skipping, i havent added these yet, but i'll comment what they are. */
                        var poscioffs = instReader.ReadUInt32();  // offset to first oscillator table
                        var poscicnt  = instReader.ReadUInt32();  // Offset to second oscillator count
                        // Console.WriteLine("Oscillator at 0x{0:X}, length {1}", poscioffs, poscicnt);
                        //Console.ReadLine();
                        instReader.ReadUInt32();                // Offset to first effect object
                        instReader.ReadUInt32();                // offset to second effect object
                        instReader.ReadUInt32();                // offset of first sensor object
                        instReader.ReadUInt32();                // offset of second sensor object
                        /*////////////////////////////////////////////////////////////////////////////*/
                        var keyCounts = instReader.ReadInt32(); // How many key regions are in here.
                        int KeyHigh   = 0;
                        int KeyLow    = 0;
                        for (int k = 0; k < keyCounts; k++)
                        {
                            var NewKey = new InstrumentKey();
                            NewKey.keys = new InstrumentKeyVelocity[0x81];
                            var keyreg_offset = instReader.ReadInt32();                   // This will be where the data for our key region is.
                            var keyptr_return = instReader.BaseStream.Position;           // This is our position after reading the pointer, we'll need to return to it
                            instReader.BaseStream.Position = BaseAddress + keyreg_offset; // Seek to the key region
                            byte key = instReader.ReadByte();                             // Read the key identifierr
                            KeyHigh = key;                                                // Set the highest key to what we just read.
                            instReader.BaseStream.Seek(3, SeekOrigin.Current);            // 3 bytes, unused.
                            var VelocityRegionCount = instReader.ReadInt32();             // read the number of entries in the velocity region array
                            for (int b = 0; b < VelocityRegionCount; b++)
                            {
                                var NewVelR     = new InstrumentKeyVelocity();
                                var velreg_offs = instReader.ReadInt32();         // read the offset of the velocity region
                                var velreg_retn = instReader.BaseStream.Position; // another one of these.  Return pointer
                                instReader.BaseStream.Position = velreg_offs + BaseAddress;
                                int VelLow  = 0;
                                int VelHigh = 0;
                                {
                                    var velocity = instReader.ReadByte();                    // The velocity of this key.
                                    VelHigh = velocity;
                                    instReader.BaseStream.Seek(3, SeekOrigin.Current);       // Unused.
                                    NewVelR.velocity = velocity;
                                    NewVelR.wsysid   = instReader.ReadUInt16();              // This will be the ID of the WAVESYSTEM that its in
                                    NewVelR.wave     = instReader.ReadUInt16();              // This will be the ID of the wave inside of that wavesystem
                                    NewVelR.Volume   = instReader.ReadSingle();              // Finetune, volume, float
                                    NewVelR.Pitch    = instReader.ReadSingle();              // finetune pitch, float.
                                    for (int idx = 0; idx < ((1 + VelHigh) - VelLow); idx++) // See below for what this is doing
                                    {
                                        NewKey.keys[(VelLow + idx)] = NewVelR;
                                        NewKey.keys[127]            = NewVelR;
                                    }
                                    VelLow = VelHigh;
                                }
                                instReader.BaseStream.Position = velreg_retn;  // return to our pointer position  [THIS IS BELOW]
                            }
                            for (int idx = 0; idx < (KeyHigh - KeyLow); idx++) // The keys are gappy.
                            {
                                NewINST.Keys[(KeyLow + idx)] = NewKey;         // So we want to interpolate the previous keys across the empty ones, so that way it's a region
                                NewINST.Keys[127]            = NewKey;
                            }
                            KeyLow = KeyHigh;                               // Set our new lowest key to the previous highest
                            instReader.BaseStream.Position = keyptr_return; // return to our last pointer position
                        }


                        break;
                    }

                    case PER2:
                    {
                        NewINST.IsPercussion = true;
                        instReader.BaseStream.Seek(0x84, SeekOrigin.Current);         // 0x88 - 4 (PERC)
                        for (int per = 0; per < 100; per++)
                        {
                            var NewKey = new InstrumentKey();
                            NewKey.keys = new InstrumentKeyVelocity[0x81];

                            var keyreg_offset = instReader.ReadInt32();         // This will be where the data for our key region is.
                            var keyptr_return = instReader.BaseStream.Position; // This is our position after reading the pointer, we'll need to return to it
                            if (keyreg_offset == 0)
                            {
                                continue;                                                 // Skip, its empty.
                            }
                            instReader.BaseStream.Position = BaseAddress + keyreg_offset; // seek to position.
                            NewINST.Pitch  = instReader.ReadSingle();
                            NewINST.Volume = instReader.ReadSingle();
                            instReader.BaseStream.Seek(8, SeekOrigin.Current);
                            var VelocityRegionCount = instReader.ReadInt32();         // read the number of entries in the velocity region array
                            for (int b = 0; b < VelocityRegionCount; b++)
                            {
                                var NewVelR     = new InstrumentKeyVelocity();
                                var velreg_offs = instReader.ReadInt32();         // read the offset of the velocity region
                                var velreg_retn = instReader.BaseStream.Position; // another one of these.  Return pointer
                                instReader.BaseStream.Position = velreg_offs + BaseAddress;
                                int VelLow  = 0;
                                int VelHigh = 0;
                                {
                                    var velocity = instReader.ReadByte();                // The velocity of this key.
                                    VelHigh = velocity;
                                    instReader.BaseStream.Seek(3, SeekOrigin.Current);   // Unused.
                                    NewVelR.velocity = velocity;
                                    NewVelR.wsysid   = instReader.ReadUInt16();          // This will be the ID of the WAVESYSTEM that its in

                                    NewVelR.wave   = instReader.ReadUInt16();            // This will be the ID of the wave inside of that wavesystem
                                    NewVelR.Volume = instReader.ReadSingle();            // Finetune, volume, float
                                    NewVelR.Pitch  = instReader.ReadSingle();            // finetune pitch, float.
                                    for (int idx = 0; idx < (VelHigh - (VelLow)); idx++) // See below for what this is doing
                                    {
                                        NewKey.keys[(VelLow + (idx))] = NewVelR;
                                        NewKey.keys[127] = NewVelR;
                                    }
                                    VelLow = VelHigh;
                                }
                                instReader.BaseStream.Position = velreg_retn;         // return to our pointer position  [THIS IS BELOW]
                            }
                            instReader.BaseStream.Position = keyptr_return;
                            NewINST.Keys[per] = NewKey;         // oops, add to instrument data or else it doesnt load x.x
                            NewINST.Keys[127] = NewKey;
                        }

                        break;
                    }

                    case PERC:

                        break;
                    }
                    Instruments[inst_id] = NewINST;      // Store it in the instruments bank
                }
                instReader.BaseStream.Position = anchor; // return back to our original pos to read the next pointer
            }
        }