private void comboSel_SelectedIndexChanged(object sender, EventArgs e)
{
try {
if (tlVectorControl1.SVGDocument.RootElement == null) {
return;
}
if (comboSel.Text == "地块列表") {
frmLayerList lay = new frmLayerList();
lay.InitData(tlVectorControl1.SVGDocument.getLayerList(), "1");
if (lay.ShowDialog() == DialogResult.OK) {
frmglebePropertyList flist1 = new frmglebePropertyList();
flist1.InitDataSub(tlVectorControl1.SVGDocument.SvgdataUid, lay.str_sid);
flist1.Show();
}
}
if (comboSel.Text == "供电区域列表") {
frmLayerList lay2 = new frmLayerList();
lay2.InitData(tlVectorControl1.SVGDocument.getLayerList(), "2");
if (lay2.ShowDialog() == DialogResult.OK) {
frmglebePropertyList flist2 = new frmglebePropertyList();
flist2.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay2.str_sid);
flist2.Show();
}
}
if (comboSel.Text == "线路列表") {
frmLayerList lay3 = new frmLayerList();
lay3.InitData(tlVectorControl1.SVGDocument.getLayerList(), "2");
if (lay3.ShowDialog() == DialogResult.OK) {
frmLinePropertyList flist3 = new frmLinePropertyList();
flist3.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay3.str_sid);
flist3.Show();
}
}
if (comboSel.Text == "电力平衡表") {
frmLayerList lay4 = new frmLayerList();
lay4.InitData(tlVectorControl1.SVGDocument.getLayerList(), "3");
if (lay4.ShowDialog() == DialogResult.OK) {
frmSubstationPropertyList fSub = new frmSubstationPropertyList();
fSub.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay4.str_sid);
fSub.Show();
}
}
} catch (Exception e1) {
MessageBox.Show("错误：" + e1.Message);
}
}
private void dotNetBarManager1_ItemClick(object sender, EventArgs e)
{
DevComponents.DotNetBar.ButtonItem btItem = sender as DevComponents.DotNetBar.ButtonItem;
//Layer layer1 = (Layer)LayerBox.ComboBoxEx.SelectedItem;
if (btItem != null)
{
if (btItem.Name == "mRoam")
{
frmlar.Hide();
}
else
{
frmlar.Show();
}
switch (btItem.Name)
{
#region 文件操作
case "mNew":
tlVectorControl1.NewFile();
break;
case "mOpen":
break;
case "mImport":
ExportImage();
//ImportDxf();
break;
case "ImportDxf":
ImportDxf();
break;
case "btExSymbol":
tlVectorControl1.ExportSymbol();
break;
case "mSave":
SaveButton();
break;
case "mSaveSVG":
tlVectorControl1.SaveAs();
break;
case "mExit":
this.Close();
//System.Data.OleDb.OleDbConnection c = new OleDbConnection("Provider=SQLOLEDB;Data source=192.168.0.30;initial catalog=tlpsp_tzkq;user id=sa;password=sa");
//OleDbCommand cmd = c.CreateCommand();
break;
case "bt1":
InitTK();
break;
case "callCAD":
try
{
//Autodesk.AutoCAD.Interop.
if (MessageBox.Show("此操作需要花费较长时间，确认导出么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
{
CAD cad = new CAD();
cad.tlVectorControl1 = tlVectorControl1;
cad.WriteDwg("ALL");
}
}
catch
{
MessageBox.Show("请安装AutoCAD2006或以上版本。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "callCADSub":
try
{
//Autodesk.AutoCAD.Interop.AcadApplicationClass a = new Autodesk.AutoCAD.Interop.AcadApplicationClass();
if (MessageBox.Show("此操作需要花费较长时间，确认导出么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
{
CAD cad = new CAD();
cad.tlVectorControl1 = tlVectorControl1;
string strlar = frmlar.getSelectedLayer();
cad.WriteDwg(strlar);
}
}
catch
{
MessageBox.Show("请安装AutoCAD2006或以上版本。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mPriSet":
tlVectorControl1.PaperSetup();
break;
case "mPrint":
tlVectorControl1.Print();
break;
case "mView":
//frmSvgView fView = new frmSvgView();
//fView.Open(tlVectorControl1.SVGDocument.SvgdataUid);
//fView.Show();
break;
case "mViewScale":
if (img != null)
{
frmtempViewScale fscale1 = new frmtempViewScale();
fscale1.ShowDialog();
}
else
{
frmViewScale fScale = new frmViewScale();
string viewScale = tlVectorControl1.SVGDocument.getViewScale();
if (viewScale != "")
{
fScale.InitData(viewScale);
}
if (fScale.ShowDialog() == DialogResult.OK)
{
//viewScale = fScale.ViewScale;
string _viewScale = fScale.ViewScale;
tlVectorControl1.SVGDocument.setViewScale(_viewScale);
if (viewScale == "")
{
viewScale = "1";
}
Recalculate(Convert.ToDecimal(_viewScale) / Convert.ToDecimal(viewScale));
}
}
break;
//case "mIncreaseView":
// tlVectorControl1.Operation = ToolOperation.IncreaseView;
// break;
case "mRzb":
frmRatio fRat = new frmRatio();
string viewRat = tlVectorControl1.SVGDocument.getRZBRatio();
if (viewRat != "")
{
fRat.InitData(viewRat);
}
if (fRat.ShowDialog() == DialogResult.OK)
{
viewRat = fRat.ViewScale;
tlVectorControl1.SVGDocument.setRZBRatio(viewRat);
}
break;
case "mEdit":
if (MapType == "所内接线图")
{
Save();
dotNetBarManager1.Bars["mainmenu"].GetItem("ImportDxf").Visible = false;
svg.SUID = ParentUID;
IList svglist = Services.BaseService.GetList("SelectSVGFILEByKey", svg);
svg = (SVGFILE)svglist[0];
sdoc = null;
sdoc = new SvgDocument();
sdoc.LoadXml(svg.SVGDATA);
tlVectorControl1.SVGDocument = sdoc;
tlVectorControl1.SVGDocument.SvgdataUid = svg.SUID;
MapType = "接线图";
CtrlSvgView.MapType = "接线图";
LoadShape("symbol_3.xml");
Init(progtype);
//ButtonEnb(true);
frmlar.SymbolDoc = tlVectorControl1.SVGDocument;
frmlar.Progtype = progtype;
frmlar.InitData();
dotNetBarManager1.Bars["mainmenu"].GetItem("ButtonItem2").Enabled = true;
dotNetBarManager1.Bars["mainmenu"].GetItem("ButtonItem7").Enabled = true;
bk1.Enabled = true;
LoadImage = true;
tlVectorControl1.Refresh();
}
tlVectorControl1.ContextMenuStrip = contextMenuStrip1;
MapType = "接线图";
break;
case "mAbout":
frmAbout frma = new frmAbout();
frma.ShowDialog();
break;
//基础操作
case "mFreeTransform":
tlVectorControl1.Operation = ToolOperation.FreeTransform;
break;
case "mRoam1":
tlVectorControl1.Operation = ToolOperation.Roam;
break;
case "mShapeTransform1":
tlVectorControl1.Operation = ToolOperation.Custom11;
break;
case "mShapeTransform2":
tlVectorControl1.Operation = ToolOperation.Custom12;
break;
case "mShapeTransform3":
tlVectorControl1.Operation = ToolOperation.Custom13;
break;
case "mShapeTransform4":
tlVectorControl1.Operation = ToolOperation.Custom15;
break;
case "mShapeTransform5":
tlVectorControl1.Operation = ToolOperation.Custom14;
break;
case "m_ljxl":
ConnLine();
break;
case "mAngleRectangle1":
tlVectorControl1.Operation = ToolOperation.AngleRectangle;
break;
case "mSelect1":
case "mSel1":
//tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.FreeTransform;
break;
case "mLine1":
tlVectorControl1.Operation = ToolOperation.Line;
break;
case "mPolyline1":
tlVectorControl1.Operation = ToolOperation.PolyLine;
break;
case "mImage1":
tlVectorControl1.Operation = ToolOperation.Image;
break;
case "mText1":
tlVectorControl1.Operation = ToolOperation.Text;
break;
case "mEllipse1":
tlVectorControl1.Operation = ToolOperation.Ellipse;
break;
case "mBezier1":
tlVectorControl1.Operation = ToolOperation.Bezier;
break;
//图元操作
case "mCopy1":
tlVectorControl1.Copy();
break;
case "mCut1":
tlVectorControl1.Cut();
break;
case "mPaste1":
PasteWithProperty();
break;
case "mDelete1":
if (tlVectorControl1.SVGDocument.CurrentElement != null && tlVectorControl1.SVGDocument.CurrentElement.ID != "svg")
{
frmMessageBox msg = new frmMessageBox();
if (msg.ShowDialog() == DialogResult.OK)
{
if (msg.ck)
{
// if(MessageBox.Show("确认删除么？","提示",MessageBoxButtons.YesNo,MessageBoxIcon.Information)==DialogResult.Yes){
for (int i = 0; i < tlVectorControl1.SVGDocument.SelectCollection.Count; i++)
{
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polygon")
{
glebeProperty gle = new glebeProperty();
gle.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
gle.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
Services.BaseService.Update("DeleteglebePropertyByEleID", gle);
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polyline" || tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Line")
{
LineInfo _line = new LineInfo();
_line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_line.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
LineInfo temp = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", _line);
if (temp != null)
{
Services.BaseService.Update("DeleteLinePropertyByEleID", _line);
Services.BaseService.Update("DeleteLine_InfoByCode", temp.UID);
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Use")
{
string str_name = ((XmlElement)(tlVectorControl1.SVGDocument.SelectCollection[i])).GetAttribute("xlink:href");
if (str_name.Contains("Substation"))
{
substation _sub = new substation();
_sub.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_sub.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
substation temp = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", _sub);
if (temp != null)
{
Services.BaseService.Update("DeletesubstationByEleID", _sub);
Services.BaseService.Update("DeleteSubstation_InfoByCode", temp.UID);
}
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.ConnectLine")
{
ConnectLine cline = (ConnectLine)tlVectorControl1.SVGDocument.SelectCollection[i];
if (cline.StartGraph != null)
{
SvgElement ele = (SvgElement)cline.StartGraph;
if (!ele.GetAttribute("xlink:href").Contains("Substation"))
{
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.StartGraph);
}
}
if (cline.EndGraph != null)
{
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.EndGraph);
}
}
}
}
else
{
for (int i = 0; i < tlVectorControl1.SVGDocument.SelectCollection.Count; i++)
{
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polyline" || tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Line")
{
LineInfo _line = new LineInfo();
_line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_line.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
LineInfo linetemp = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", _line);
if (linetemp != null)
{
PowerProTypes temp = (PowerProTypes)Services.BaseService.GetObject("SelectPowerProTypesByCode", linetemp.UID);
if (temp != null)
{
linetemp.EleID = "";
Services.BaseService.Update<LineInfo>(linetemp);
}
else
{
Services.BaseService.Update("DeleteLineInfo", linetemp);
}
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Use")
{
string str_name = ((XmlElement)(tlVectorControl1.SVGDocument.SelectCollection[i])).GetAttribute("xlink:href");
if (str_name.Contains("Substation"))
{
substation _sub = new substation();
_sub.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_sub.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
substation subtemp = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", _sub);
if (subtemp != null)
{
PowerProTypes temp = (PowerProTypes)Services.BaseService.GetObject("SelectPowerProTypesByCode", subtemp.UID);
if (temp != null)
{
subtemp.EleID = "";
Services.BaseService.Update<substation>(subtemp);
}
else
{
Services.BaseService.Update("Deletesubstation", subtemp);
}
}
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.ConnectLine")
{
ConnectLine cline = (ConnectLine)tlVectorControl1.SVGDocument.SelectCollection[i];
if (cline.StartGraph != null)
{
SvgElement ele = (SvgElement)cline.StartGraph;
if (!ele.GetAttribute("xlink:href").Contains("Substation"))
{
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.StartGraph);
}
}
if (cline.EndGraph != null)
{
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.EndGraph);
}
}
}
}
tlVectorControl1.Delete();
}
}
//tlVectorControl1.Operation = ToolOperation.Select;
break;
case "mUodo1":
tlVectorControl1.Undo();
break;
case "mRedo1":
tlVectorControl1.Redo();
break;
case "mAlign1":
if (btItem.Tag is ButtonItem)
{
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.Align(AlignType.Left);
}
else
{
tlVectorControl1.Align(AlignType.Left);
}
tlVectorControl1.Refresh();
break;
case "mAlignLeft1":
tlVectorControl1.Align(AlignType.Left);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignRight1":
tlVectorControl1.Align(AlignType.Right);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignTop1":
tlVectorControl1.Align(AlignType.Top);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignBottom1":
tlVectorControl1.Align(AlignType.Bottom);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignHorizontalCenter1":
tlVectorControl1.Align(AlignType.HorizontalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignVerticalCenter1":
tlVectorControl1.Align(AlignType.VerticalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mOrder1":
if (btItem.Tag is ButtonItem)
{
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.ChangeLevel(LevelType.Top);
}
else
{
tlVectorControl1.ChangeLevel(LevelType.Top);
}
break;
case "mGoTop1":
tlVectorControl1.ChangeLevel(LevelType.Top);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoUp1":
tlVectorControl1.ChangeLevel(LevelType.Up);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoDown1":
tlVectorControl1.ChangeLevel(LevelType.Down);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoBottom1":
tlVectorControl1.ChangeLevel(LevelType.Bottom);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mRotate1":
if (btItem.Tag is ButtonItem)
{
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.FlipX();
}
else
{
tlVectorControl1.FlipX();
}
break;
case "mToH1":
tlVectorControl1.FlipX();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToV1":
tlVectorControl1.FlipY();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToLeft1":
tlVectorControl1.RotateSelection(-90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToRight1":
tlVectorControl1.RotateSelection(90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
//图形操作
case "mLeadLine1":
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("电网规划层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
// sgt1.Visible = true;
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.LeadLine;
break;
case "mAreaPoly1":
if (!getlayer(SvgDocument.currentLayer, "城市规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("城市规划层"))
{
MessageBox.Show("请选择城市规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.AreaPolygon;
break;
case "mFzzj1": //放置注记
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
//LayerBox.ComboBoxEx.SelectedIndex = 2;
tlVectorControl1.Operation = ToolOperation.Select;
MapType = "规划统计";
break;
case "mPriQu1":
SubPrint = true;
tlVectorControl1.Operation = ToolOperation.InterEnclosurePrint;
break;
case "mReCompute1":
if (MessageBox.Show("确认要重新计算全图的电量和负荷么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes)
{
string scale = tlVectorControl1.SVGDocument.getViewScale();
if (scale != "")
{
Recalculate(Convert.ToDecimal(scale));
}
else
{
Recalculate(1);
}
MessageBox.Show("重新计算完成", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mFhbz1":
if (MessageBox.Show("是否生成负荷标注?", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
{
Fhbz();
}
break;
case "mCJ":
tlVectorControl1.Operation = ToolOperation.PolyLine;
csOperation = CustomOperation.OP_MeasureDistance;
break;
#endregion
#region 基础图元
case "mDecreaseView":
tlVectorControl1.Operation = ToolOperation.DecreaseView;
break;
case "mIncreaseView":
tlVectorControl1.Operation = ToolOperation.IncreaseView;
break;
case "mRoam":
tlVectorControl1.Operation = ToolOperation.Roam;
break;
case "mSelect":
case "mSel":
//tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.FreeTransform;
sel_sym = "";
sel_start_point = "";
break;
//case "mFreeTransform":
// tlVectorControl1.Operation = ToolOperation.FreeTransform;
// break;
case "mFreeLines"://锁套
tlVectorControl1.Operation = ToolOperation.FreeLines;
break;
case "mFreePath":
tlVectorControl1.Operation = ToolOperation.FreePath;
break;
case "mShapeTransform":
tlVectorControl1.Operation = ToolOperation.ShapeTransform;
break;
case "mAngleRectangle":
tlVectorControl1.Operation = ToolOperation.AngleRectangle;
break;
case "mEllipse":
tlVectorControl1.Operation = ToolOperation.Ellipse;
break;
case "mLine":
tlVectorControl1.Operation = ToolOperation.Line;
break;
case "mPolyline":
tlVectorControl1.Operation = ToolOperation.PolyLine;
break;
case "mPolygon":
tlVectorControl1.Operation = ToolOperation.Polygon;
break;
case "mImage":
tlVectorControl1.Operation = ToolOperation.Image;
break;
case "mText":
tlVectorControl1.Operation = ToolOperation.Text;
break;
case "mBezier":
tlVectorControl1.Operation = ToolOperation.Bezier;
break;
case "mEnclosure":
tlVectorControl1.Operation = ToolOperation.Enclosure;
break;
case "mGroup":
tlVectorControl1.Group();
break;
case "mUnGroup":
tlVectorControl1.UnGroup();
break;
case "mlinelx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Line;
break;
case "mzxlx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Rightangle;
break;
case "mqxlx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Spline;
break;
case "mqzlx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Polyline;
break;
case "mCJ1":
tlVectorControl1.Operation = ToolOperation.PolyLine;
csOperation = CustomOperation.OP_MeasureDistance;
break;
#endregion
#region 视图
case "mOption":
tlVectorControl1.SetOption();
break;
case "mLayer":
LayerManagerShow();
//tlVectorControl1.LayerManager();
break;
case "mAirscape":
frmAirscape fAir = new frmAirscape();
fAir.InitData(tlVectorControl1);
fAir.Owner = this;
fAir.ShowInTaskbar = false;
fAir.Top = Screen.PrimaryScreen.WorkingArea.Height - 250;
fAir.Left = Screen.PrimaryScreen.WorkingArea.Width - 300;
fAir.Show();
break;
case "btTL":
frmGlebeTypeList fgle = new frmGlebeTypeList();
fgle.Show();
break;
case "mMapOpacity"://地图透明度
frmMapSetup dlg = new frmMapSetup();
dlg.MapOpacity = this.MapOpacity;
if (dlg.ShowDialog() == DialogResult.OK)
{
this.MapOpacity = dlg.MapOpacity;
}
break;
#endregion
#region 查看
case "mDklb":
//SaveAllLayer();
frmLayerList lay = new frmLayerList();
lay.InitData(tlVectorControl1.SVGDocument.getLayerList(), "1");
if (lay.ShowDialog() == DialogResult.OK)
{
frmglebePropertyList flist1 = new frmglebePropertyList();
flist1.InitDataSub(tlVectorControl1.SVGDocument.SvgdataUid, lay.str_sid);
flist1.Show();
}
break;
case "m_dktj":
frmLayerList layn = new frmLayerList();
layn.InitData(tlVectorControl1.SVGDocument.getLayerList(), "1");
if (layn.ShowDialog() == DialogResult.OK)
{
frmglebePropertyZHList flist1 = new frmglebePropertyZHList();
flist1.InitDataSub(tlVectorControl1.SVGDocument.SvgdataUid, layn.str_sid);
flist1.Show();
}
break;
case "mGhlb":
frmLayerList lay2 = new frmLayerList();
lay2.InitData(tlVectorControl1.SVGDocument.getLayerList(), "2");
if (lay2.ShowDialog() == DialogResult.OK)
{
frmglebePropertyList flist2 = new frmglebePropertyList();
flist2.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay2.str_sid);
flist2.Show();
}
break;
case "mLineList":
frmLayerList lay3 = new frmLayerList();
lay3.InitData(tlVectorControl1.SVGDocument.getLayerList(), "2");
if (lay3.ShowDialog() == DialogResult.OK)
{
frmLinePropertyList flist3 = new frmLinePropertyList();
flist3.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay3.str_sid);
flist3.Show();
}
break;
case "mDlph":
frmLayerList lay4 = new frmLayerList();
lay4.InitData(tlVectorControl1.SVGDocument.getLayerList(), "3");
if (lay4.ShowDialog() == DialogResult.OK)
{
frmSubstationPropertyList fSub = new frmSubstationPropertyList();
fSub.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay4.str_sid);
fSub.Show();
}
break;
case "ButtonJXT":
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg" || (tlVectorControl1.SVGDocument.CurrentElement.GetType().ToString()) != "ItopVector.Core.Figure.Use")
{
MessageBox.Show("没有选择变电站！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
ParentUID = tlVectorControl1.SVGDocument.SvgdataUid;
Save();
ParentUID = tlVectorControl1.SVGDocument.SvgdataUid;
SVGFILE svg_temp = new SVGFILE();
svg_temp.SUID = ((XmlElement)tlVectorControl1.SVGDocument.CurrentElement).GetAttribute("id");
svg_temp.FILENAME = getBdzName(svg_temp.SUID);//
IList svglist1 = Services.BaseService.GetList("SelectSVGFILEByKey", svg_temp);
OpenJXT(svglist1, svg_temp);
break;
#endregion
#region 布局，对齐，顺序
case "mRotate":
if (btItem.Tag is ButtonItem)
{
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.FlipX();
}
else
{
tlVectorControl1.FlipX();
}
break;
case "mToH":
tlVectorControl1.FlipX();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToV":
tlVectorControl1.FlipY();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToLeft":
tlVectorControl1.RotateSelection(-90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToRight":
tlVectorControl1.RotateSelection(90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mAlign":
if (btItem.Tag is ButtonItem)
{
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.Align(AlignType.Left);
}
else
{
tlVectorControl1.Align(AlignType.Left);
}
tlVectorControl1.Refresh();
break;
case "mAlignLeft":
tlVectorControl1.Align(AlignType.Left);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignRight":
tlVectorControl1.Align(AlignType.Right);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignTop":
tlVectorControl1.Align(AlignType.Top);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignBottom":
tlVectorControl1.Align(AlignType.Bottom);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignHorizontalCenter":
tlVectorControl1.Align(AlignType.HorizontalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignVerticalCenter":
tlVectorControl1.Align(AlignType.VerticalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mOrder":
if (btItem.Tag is ButtonItem)
{
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.ChangeLevel(LevelType.Top);
}
else
{
tlVectorControl1.ChangeLevel(LevelType.Top);
}
break;
case "mGoTop":
tlVectorControl1.ChangeLevel(LevelType.Top);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoUp":
tlVectorControl1.ChangeLevel(LevelType.Up);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoDown":
tlVectorControl1.ChangeLevel(LevelType.Down);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoBottom":
tlVectorControl1.ChangeLevel(LevelType.Bottom);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
#endregion
#region 图元操作
case "mCopy":
tlVectorControl1.Copy();
break;
case "mCut":
tlVectorControl1.Cut();
break;
case "mPaste":
//tlVectorControl1.Paste();
PasteWithProperty();
break;
case "mDelete":
Delete();
//tlVectorControl1.Operation = ToolOperation.Select;
break;
case "mUodo":
tlVectorControl1.Undo();
break;
case "mRedo":
tlVectorControl1.Redo();
break;
#endregion
#region 业务操作
case "m_line1": //线路走廊优化
Wjghboolflag = false;
frmPlanList f = new frmPlanList();
if (f.ShowDialog() == DialogResult.Yes)
{
linekey = f.Key;
tlVectorControl1.Operation = ToolOperation.Select;
//tlVectorControl1.Operation = ToolOperation.LeadLine;
}
break;
case "m_subxz": //变电站选址
Wjghboolflag = false;
Services.BaseService.GetList<PSP_SubstationSelect>();
frmSubstationManager mng = new frmSubstationManager();
mng.OnOpen += new OnOpenSubhandler(mng_OnOpen);
DialogResult dia = mng.ShowDialog();
if (dia == DialogResult.OK)
{
XZ_bdz = mng.code;
MessageBox.Show("请选择变电站拖放置到希望的位置或者进行变电站自动选址。");
PSP_SubstationSelect sel = new PSP_SubstationSelect();
sel.col2 = XZ_bdz;
IList<PSP_SubstationSelect> _plist = Services.BaseService.GetList<PSP_SubstationSelect>("SelectPSP_SubstationSelectList", sel);
for (int n = 0; n < _plist.Count; n++)
{
XmlNodeList _nlist = tlVectorControl1.SVGDocument.SelectNodes("svg/use [@id='" + _plist[n].EleID + "']");
if (_nlist.Count < 1)
{
Services.BaseService.Delete<PSP_SubstationSelect>(_plist[n]);
}
}
}
if (dia == DialogResult.Ignore)
{
string keyid = mng.KeyID;
string suid = mng.SUID;
PSP_SubstationUserNum n1 = new PSP_SubstationUserNum();
n1.col2 = keyid;
IList<PSP_SubstationUserNum> list1 = Services.BaseService.GetList<PSP_SubstationUserNum>("SelectPSP_SubstationNum2", n1);
for (int i = 0; i < list1.Count; i++)
{
if (suid == list1[i].SubStationID)
{
PSP_SubstationSelect s = new PSP_SubstationSelect();
s.UID = list1[i].SubStationID;
s.EleID = list1[i].userID;
XmlNodeList nnn1 = tlVectorControl1.SVGDocument.SelectNodes("//* [@id='" + s.EleID + "']");
foreach (XmlNode node1 in nnn1)
{
tlVectorControl1.SVGDocument.RootElement.RemoveChild(node1);
}
Services.BaseService.Update("DeletePSP_SubstationSelect", s);
}
}
tlVectorControl1.Refresh();
}
break;
case "mSubPrint":
Hashtable HashTable1 = new Hashtable();
HashTable1.Add("SUID", tlVectorControl1.SVGDocument.SvgdataUid);
Services.BaseService.Update("UpdateGlebePropertyAll", HashTable1);
break;
case "mJQLeadLine":
tlVectorControl1.Operation = ToolOperation.Select;
frmAddLine aLine = new frmAddLine();
if (aLine.ShowDialog() == DialogResult.OK)
{
string points = "";
StringBuilder bpts = new StringBuilder();
ArrayList list = aLine.list;
LineInfo line = aLine.line;
string lineWidth = aLine.LineWidth;
//ICollection Ilist = list.Values;
//IEnumerator IEnum=Ilist.GetEnumerator();
for (int n = 0; n < list.Count; n++)
{
//while (IEnum.MoveNext())
//{
string[] str = ((string)list[n]).Split(',');
//string[] str = ((string)IEnum.Current).Split(',');
string[] JWD1 = str[0].Split(' ');
double J1 = Convert.ToDouble(JWD1[0]);
Double W1 = Convert.ToDouble(JWD1[1]);
Double D1 = Convert.ToDouble(JWD1[2]);
string[] JWD2 = str[1].Split(' ');
Double J2 = Convert.ToDouble(JWD2[0]);
Double W2 = Convert.ToDouble(JWD2[1]);
Double D2 = Convert.ToDouble(JWD2[2]);
Double JD = J1 + W1 / 60 + D1 / 3600;
Double WD = J2 + W2 / 60 + D2 / 3600;
IntXY xy = mapview.getXY(JD, WD);
if (mapview is MapViewGoogle)
bpts.Append(xy.X + " " + xy.Y + ",");
else
bpts.Append((-xy.X / (double)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (double)tlVectorControl1.ScaleRatio) + ",");
//}
}
if (bpts.Length > 0)
points = bpts.ToString(0, bpts.Length - 1);
XmlElement n1 = tlVectorControl1.SVGDocument.CreateElement("polyline") as Polyline;
n1.SetAttribute("IsLead", "1");
n1.SetAttribute("points", points);
n1.SetAttribute("layer", SvgDocument.currentLayer);
// n1.SetAttribute("style", styleValue);
tlVectorControl1.SVGDocument.RootElement.AppendChild(n1);
line.UID = Guid.NewGuid().ToString();
line.EleID = n1.GetAttribute("id");
line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
Services.BaseService.Create<LineInfo>(line);
}
break;
case "mLeadLine":
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("电网规划层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
// sgt1.Visible = true;
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.LeadLine;
break;
case "m_dhx":
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("电网规划层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
// sgt1.Visible = true;
str_dhx = "1";
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.LeadLine;
break;
case "mAreaPoly":
#if(!CITY)
if (!getlayer(SvgDocument.currentLayer, "城市规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("城市规划层"))
{
MessageBox.Show("请选择城市规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
#endif
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.AreaPolygon;
break;
case "sjsz":
frmCS cs = new frmCS();
cs.ShowDialog();
break;
case "shjg":
GHWPG();
break;
case "mFx":
SubPrint = false;
bool ck = false;
ArrayList listlayers = frmlar.GetSelectLayers();
//CheckedListBox.CheckedItemCollection ckcol = frmlar.checkedListBox1.CheckedItems;
for (int i = 0; i < listlayers.Count; i++)
{
Layer _lar = listlayers[i] as Layer;
if (_lar.GetAttribute("layerType") == "城市规划层")
{
ck = true;
}
}
if (!ck)
{
MessageBox.Show("请打开城市规划层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.InterEnclosure;
MapType = "接线图";
break;
case "mGhfx":
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Enclosure;
// SvgDocument.currentLayer = getlayer("供电区域层", tlVectorControl1.SVGDocument.getLayerList()).ID;
MapType = "接线图";
//bar2.Visible = false;
break;
//case "mEdit":
// //bar2.Visible = true;
// SvgDocument.currentLayer = "layer97052";
// MapType = "接线图";
// break;
case "mFzzj": //放置注记
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
//LayerBox.ComboBoxEx.SelectedIndex = 2;
tlVectorControl1.Operation = ToolOperation.Select;
MapType = "规划统计";
break;
case "mDkwh": //地块维护
frmPropertyClass frmProp = new frmPropertyClass();
frmProp.ShowDialog();
break;
case "mDkfl": //地块分类
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg")
{
MessageBox.Show("请选择地块。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
}
frmUsePropertySelect frmUseSel = new frmUsePropertySelect();
frmUseSel.InitData(tlVectorControl1.SVGDocument.CurrentElement.ID, tlVectorControl1.SVGDocument.SvgdataUid);
frmUseSel.ShowDialog();
break;
case "mGldt": //关联地图
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg")
{
MessageBox.Show("请选择地块。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
}
frmFileSelect frmSel = new frmFileSelect();
frmSel.InitData(tlVectorControl1.SVGDocument.CurrentElement.ID, tlVectorControl1.SVGDocument.SvgdataUid, true);
frmSel.ShowDialog();
break;
case "mPriQu":
SubPrint = true;
tlVectorControl1.Operation = ToolOperation.InterEnclosurePrint;
break;
case "m_djcl":
tlVectorControl1.Operation = ToolOperation.Select;
str_djcl = "1";
MessageBox.Show("请选择线路进行档距测量。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
case "m_inxljwd":
frmInJWD f_in = new frmInJWD();
if (f_in.ShowDialog() == DialogResult.OK)
{
InputFile(f_in.GetFileName(), f_in.GetCheck());
}
break;
case "m_inbdzjwd":
frmInJWD f_in2 = new frmInJWD();
if (f_in2.ShowDialog() == DialogResult.OK)
{
InputBDZFile(f_in2.GetFileName(), f_in2.GetCheck());
}
break;
case "m_outsubjwd":
if (MessageBox.Show("确定要导出当前图层所有变电站坐标吗？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
{
string str_dy = "";
XmlNodeList nn0 = tlVectorControl1.SVGDocument.SelectNodes("svg/use [@layer='" + SvgDocument.currentLayer + "']");
string lab = tlVectorControl1.SVGDocument.CurrentLayer.Label;
Excel.Application ex = new Excel.Application();
Excel.Workbook workBook = ex.Workbooks.Add(Microsoft.Office.Interop.Excel.XlWBATemplate.xlWBATWorksheet);
//workBook.Worksheets.Add(Type.Missing, workBook.ActiveSheet, 1, Type.Missing);
Excel.Worksheet xSheet1 = (Excel.Worksheet)ex.Worksheets[1];
int c = xSheet1.Columns.Count;
int r = xSheet1.Rows.Count;
((Excel.Range)xSheet1.Cells[1, 1]).Value2 = "序号";
((Excel.Range)xSheet1.Cells[1, 2]).Value2 = "变电站名称";
((Excel.Range)xSheet1.Cells[1, 3]).Value2 = "电压等级";
((Excel.Range)xSheet1.Cells[1, 4]).Value2 = "经度";
((Excel.Range)xSheet1.Cells[1, 5]).Value2 = "纬度";
for (int n = 0; n < nn0.Count; n++)
{
XmlElement _xele = (XmlElement)nn0[n];
string jwd_info = _xele.GetAttribute("jwd-info");
string infoname = _xele.GetAttribute("info-name");
string dyinfo = _xele.GetAttribute("xlink:href");
dyinfo = getDY(dyinfo);
if (jwd_info != "")
{
string[] jwd = jwd_info.Split(",".ToCharArray());
((Excel.Range)xSheet1.Cells[n + 2, 1]).Value2 = n + 1;
((Excel.Range)xSheet1.Cells[n + 2, 2]).Value2 = infoname;
((Excel.Range)xSheet1.Cells[n + 2, 3]).Value2 = dyinfo;
((Excel.Range)xSheet1.Cells[n + 2, 4]).Value2 = jwd[0].Trim();
((Excel.Range)xSheet1.Cells[n + 2, 5]).Value2 = jwd[1].Trim();
}
else
{
// LongLat lat = mapview.ParseToLongLat(((Use)_xele).CenterPoint.X, ((Use)_xele).CenterPoint.Y);
LongLat lat = mapview.OffSetZero(-(int)(Convert.ToInt32(((Use)_xele).CenterPoint.X) * tlVectorControl1.ScaleRatio), -(int)(Convert.ToInt32(((Use)_xele).CenterPoint.Y) * tlVectorControl1.ScaleRatio));
((Excel.Range)xSheet1.Cells[n + 2, 1]).Value2 = n + 1;
((Excel.Range)xSheet1.Cells[n + 2, 2]).Value2 = infoname;
((Excel.Range)xSheet1.Cells[n + 2, 3]).Value2 = dyinfo;
((Excel.Range)xSheet1.Cells[n + 2, 4]).Value2 = lat.Longitude;
((Excel.Range)xSheet1.Cells[n + 2, 5]).Value2 = lat.Latitude;
}
}
ex.Visible = true;
}
break;
case "m_outxljwd":
tlVectorControl1.Operation = ToolOperation.Select;
bool ckright = true;
if (MessageBox.Show("确定要导出当前图层所有线路坐标吗？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
{
string str_dy = "";
XmlNodeList nn0 = tlVectorControl1.SVGDocument.SelectNodes("svg/polyline [@IsLead='1'] [@layer='" + SvgDocument.currentLayer + "']");
string lab = tlVectorControl1.SVGDocument.CurrentLayer.Label;
for (int n = 0; n < nn0.Count; n++)
{
str_dy = "";
XmlElement x = nn0[n] as XmlElement;
str_dy = x.GetAttribute("dy-info");
string devid = x.GetAttribute("Deviceid");
if (str_dy == "")
{
if (devid != "")
{
PSPDEV dev = Services.BaseService.GetOneByKey<PSPDEV>(devid);
if (dev != null)
{
if (dev.RateVolt != 0)
{
str_dy = dev.RateVolt.ToString("###");
ckright = true;
break;
}
}
}
}
}
if (str_dy == "")
{
if (MessageBox.Show("选择图层线路不包含电压等级信息，是否继续导出？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
{
ckright = true;
}
else
{
ckright = false;
}
}
if (ckright)
{
Excel.Application ex = new Excel.Application();
Excel.Workbook workBook = ex.Workbooks.Add(Microsoft.Office.Interop.Excel.XlWBATemplate.xlWBATWorksheet);
for (int n = 0; n < nn0.Count; n++)
{
XmlElement _xele = (XmlElement)nn0[n];
workBook.Worksheets.Add(Type.Missing, workBook.ActiveSheet, 1, Type.Missing);
Excel.Worksheet xSheet1 = (Excel.Worksheet)ex.Worksheets[n + 1];
int c = xSheet1.Columns.Count;
int r = xSheet1.Rows.Count;
((Excel.Range)xSheet1.Cells[1, 1]).Value2 = "杆塔号";
((Excel.Range)xSheet1.Cells[1, 2]).Value2 = "电压等级";
((Excel.Range)xSheet1.Cells[1, 3]).Value2 = "经度";
((Excel.Range)xSheet1.Cells[1, 4]).Value2 = "纬度";
string jwd_info = _xele.GetAttribute("jwd-info");
string gt_info = _xele.GetAttribute("gt-info");
if (jwd_info != "")
{
string[] gt = gt_info.Split(",".ToCharArray());
string[] jwd = jwd_info.Split(";".ToCharArray());
for (int m = 0; m < jwd.Length; m++)
{
string[] jw_str = jwd[m].Split(",".ToCharArray());
((Excel.Range)xSheet1.Cells[m + 2, 1]).Value2 = gt[m];
((Excel.Range)xSheet1.Cells[m + 2, 2]).Value2 = str_dy;
((Excel.Range)xSheet1.Cells[m + 2, 3]).Value2 = jw_str[0].Trim();
((Excel.Range)xSheet1.Cells[m + 2, 4]).Value2 = jw_str[1].Trim();
}
}
else
{
PointF[] pt = TLMath.getPolygonPoints(_xele);
for (int k = 0; k < pt.Length; k++)
{
LongLat lat = mapview.OffSetZero(-(int)(Convert.ToInt32(pt[k].X) * tlVectorControl1.ScaleRatio), -(int)(Convert.ToInt32(pt[k].Y) * tlVectorControl1.ScaleRatio));
//LongLat lat= mapview.ParseToLongLat(pt[k].X, pt[k].Y);
((Excel.Range)xSheet1.Cells[k + 2, 1]).Value2 = Convert.ToString(k + 1);
((Excel.Range)xSheet1.Cells[k + 2, 2]).Value2 = str_dy;
((Excel.Range)xSheet1.Cells[k + 2, 3]).Value2 = lat.Longitude;
((Excel.Range)xSheet1.Cells[k + 2, 4]).Value2 = lat.Latitude;
}
}
string info_name = _xele.GetAttribute("info-name");
if (info_name != "")
{
for (int k = 1; k < workBook.Worksheets.Count; k++)
{
if (((Excel.Worksheet)workBook.Worksheets[k]).Name == info_name)
{
info_name = info_name + k.ToString();
break;
}
}
xSheet1.Name = info_name;
}
}
Excel.Worksheet xSheett = (Excel.Worksheet)ex.Worksheets[ex.Worksheets.Count];
xSheett.Activate();
xSheett.Delete();
ex.Visible = true;
}
}
break;
case "m_unsel":
string bdzwhere = " UID not in (";
string xlwhere = " where SUID not in (";
PSPDEV obj = new PSPDEV();
DeviceHelper.pspflag = false;
DeviceHelper.Wjghflag = false;
string[] deviceType = new string[] { "05", "20" };
XmlNodeList lslist = tlVectorControl1.SVGDocument.SelectNodes("svg/polyline [@IsLead='1'] [@Deviceid!='']");
XmlNodeList useList = tlVectorControl1.SVGDocument.SelectNodes("svg/use [@Deviceid!='']");
//XmlNodeList useList = tlVectorControl1.SVGDocument.SelectNodes("svg/use [contains(use,'Sub')]");
for (int x1 = 0; x1 < lslist.Count; x1++)
{
XmlElement _node = lslist[x1] as XmlElement;
xlwhere = xlwhere + "'" + _node.GetAttribute("Deviceid") + "',";
}
for (int x2 = 0; x2 < useList.Count; x2++)
{
XmlElement _node = useList[x2] as XmlElement;
bdzwhere = bdzwhere + "'" + _node.GetAttribute("Deviceid") + "',";
}
if (bdzwhere.Length > 15)
{
bdzwhere = bdzwhere.Substring(0, bdzwhere.Length - 1);
}
if (xlwhere.Length > 15)
{
xlwhere = xlwhere.Substring(0, xlwhere.Length - 1);
}
bdzwhere = bdzwhere + ") and ";
xlwhere = xlwhere + ") and ";
DeviceHelper.bdzwhere = bdzwhere;
DeviceHelper.xlwhere = xlwhere;
DeviceHelper.SelectDeviceDLG(Itop.Client.MIS.ProgUID, deviceType);
DeviceHelper.bdzwhere = "";
DeviceHelper.xlwhere = "";
break;
case "ORP":
OpenProject orp = new OpenProject();
orp.ProjectID = Itop.Client.MIS.ProgUID;
orp.Initdata(false);
if (orp.ShowDialog() == DialogResult.OK)
{
if (orp.FileSUID != null)
{
ElectricLoadCal elcORP = new ElectricLoadCal();
elcORP.ORP(orp.FileSUID, 100);
}
}
break;
case "mReCompute":
if (MessageBox.Show("确认要重新计算全图的电量和负荷么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes)
{
string scale = tlVectorControl1.SVGDocument.getViewScale();
if (scale != "")
{
Recalculate(Convert.ToDecimal(scale));
}
else
{
Recalculate(1);
}
MessageBox.Show("重新计算完成", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mXLine":
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.XPolyLine;
break;
case "mYLine":
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.YPolyLine;
break;
case "mFhbz":
//if (MessageBox.Show("是否生成负荷标注?", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
//{
// Fhbz();
//}
//FrmSet f_set = new FrmSet();
//if (f_set.ShowDialog()==DialogResult.OK)
//{
if (XZ_bdz == "")
{
MessageBox.Show("请选择一个变电站选址方案。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.InterEnclosure;
bdz_xz = "yes";
// str_dy = f_set.Str_dj;
// str_num = f_set.Str_num;
// str_jj = f_set.Str_jj;
//}
break;
case "mSaveGroup":
if (tlVectorControl1.SVGDocument.SelectCollection.Count > 1)
{
string content = "<svg>";
SvgElementCollection col = tlVectorControl1.SVGDocument.SelectCollection;
for (int i = 0; i < col.Count; i++)
{
SvgElement _e = (SvgElement)col[i];
if (_e.ID != "svg")
{
content = content + _e.OuterXml;
}
}
RectangleF rect = tlVectorControl1.DrawArea.viewer.SelectedViewRectangle;
content = content + "</svg>";
frmSaveGroup fm = new frmSaveGroup();
fm.rect = rect;
fm.Content = content;
fm.ShowDialog();
}
else
{
MessageBox.Show("请至少选择2个图元。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
break;
case "mInsert":
frmUseGroup fg = new frmUseGroup();
if (fg.ShowDialog() == DialogResult.OK)
{
UseGroup u = fg.SelectedUseGroup;
if (u != null)
{
frmXY xy = new frmXY();
if (xy.ShowDialog() == DialogResult.OK)
{
decimal x = xy.GetX();
decimal y = xy.GetY();
string content = u.Content;
XmlDocument doc = new XmlDocument();
doc.LoadXml(u.Content);
XmlNodeList list = doc.ChildNodes;
XmlNode _node = list[0];
XmlNodeList sonlist = _node.ChildNodes;
XmlElement ele = tlVectorControl1.SVGDocument.CreateElement("g");
ele.SetAttribute("layer", SvgDocument.currentLayer);
for (int i = 0; i < sonlist.Count; i++)
{
XmlNode _sonnode = sonlist[i];
//string str = _sonnode.OuterXml;
if (_sonnode.Name == "use")
{
string sid = ((XmlElement)_sonnode).GetAttribute("xlink:href");
XmlNode _snode = symbolSelector.SymbolDoc.SelectSingleNode("//*[@id='" + sid.Substring(1) + "']");
tlVectorControl1.SVGDocument.AddDefsElement((SvgElement)_snode);
}
ele.AppendChild(_sonnode);
string ss = ele.OuterXml;
}
//RectangleF r=((Group)ele).GetBounds();
string tr = "matrix(1,0,0,1,";
tr = tr + Convert.ToString(x - Convert.ToDecimal(u.X)) + ",";
tr = tr + Convert.ToString(y - Convert.ToDecimal(u.Y)) + ")";
ele.SetAttribute("transform", tr);
// transform="matrix(1,0,0,1,2558.82,-352.94)"
tlVectorControl1.SVGDocument.RootElement.AppendChild(ele);
tlVectorControl1.SVGDocument.SelectCollection.Clear();
tlVectorControl1.SVGDocument.SelectCollection.Add((SvgElement)ele);
tlVectorControl1.UnGroup();
// tlVectorControl1.Refresh();
}
}
}
break;
case "m_tp":
frmImgManager frm = new frmImgManager();
frm.StrName = "";
frm.StrRemark = "";
frm.ShowDialog();
break;
case "m_reDraw":
string svguid = tlVectorControl1.SVGDocument.SvgdataUid;
XmlNodeList nn1 = tlVectorControl1.SVGDocument.SelectNodes("svg/polyline [@IsLead='1']");
LineType lt = new LineType();
IList tpList = Services.BaseService.GetList("SelectLineTypeList", lt);
Hashtable dkHs = new Hashtable();
for (int i = 0; i < tpList.Count; i++)
{
LineType _gle = (LineType)tpList[i];
dkHs.Add(_gle.TypeName, _gle.Color);
}
bool bo = tlVectorControl1.SVGDocument.Update;
tlVectorControl1.SVGDocument.Update = false;
for (int j = 0; j < nn1.Count; j++)
{
XmlElement _node1 = (XmlElement)nn1.Item(j);
LineInfo line = new LineInfo();
line.SvgUID = svguid;
line.EleID = _node1.GetAttribute("id");
line = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", line);
if (line != null)
{
string t = (string)dkHs[line.Voltage + "kV"];
string color1 = ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(t)));
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(_node1, "stroke", color1);
}
}
tlVectorControl1.SVGDocument.Update = bo;
break;
case "m_subColor":
string svguid1 = tlVectorControl1.SVGDocument.SvgdataUid;
XmlNodeList nn2 = tlVectorControl1.SVGDocument.SelectNodes("svg/defs/symbol");
LineType lt1 = new LineType();
IList tpList1 = Services.BaseService.GetList("SelectLineTypeList", lt1);
Hashtable dkHs1 = new Hashtable();
for (int i = 0; i < tpList1.Count; i++)
{
LineType _gle = (LineType)tpList1[i];
dkHs1.Add(_gle.TypeName.ToLower(), _gle.Color);
}
bool bo1 = tlVectorControl1.SVGDocument.Update;
tlVectorControl1.SVGDocument.Update = false;
Regex regex = new Regex(@"\d{2,3}(?=kv)");
foreach (Symbol _node1 in nn2)
{
string subName = _node1.GetAttribute("label").ToLower();
Match match1 = regex.Match(subName);
if (match1.Success)
{
try
{
string t = (string)dkHs1[match1.Value + "kv"];
//if (match1.Value == "220")
//{
// t = t;
//}
string color1 = ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(t)));
foreach (SvgElement element in _node1.GraphList)
{
if (element.SvgAttributes.ContainsKey("stroke") && element.SvgAttributes["stroke"].ToString() != "#FFFFFF")
{
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(element, "stroke", color1);
}
if (element.SvgAttributes.ContainsKey("fill") && element.SvgAttributes["fill"].ToString() != "#FFFFFF")
{
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(element, "fill", color1);
}
if (element.SvgAttributes.ContainsKey("hatch-color") && element.SvgAttributes["hatch-color"].ToString() != "#FFFFFF")
{
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(element, "hatch-color", color1);
}
}
}
catch { }
}
}
tlVectorControl1.SVGDocument.Update = bo1;
break;
#endregion
#region 图层操作
case "layerImport":
tlVectorControl1.Operation = ToolOperation.FreePath;
layerImport();
break;
case "layerExport":
layerExport();
break;
case "m_kbsText":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows)
{
if (r1[0].ToString() != "")
{
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[12]);
WD = Convert.ToDecimal(r1[13]);
PointF fnt = mapview.ParseToPoint(JD, WD);
XmlElement t1 = tlVectorControl1.SVGDocument.CreateElement("text") as Text;
t1.SetAttribute("x", Convert.ToString(fnt.X / (float)tlVectorControl1.ScaleRatio + 8));
t1.SetAttribute("y", Convert.ToString(fnt.Y / (float)tlVectorControl1.ScaleRatio));
t1.SetAttribute("layer", SvgDocument.currentLayer);
t1.SetAttribute("style", "fill:#FFFFFF;fill-opacity:1;stroke:#000000;stroke-opacity:1;");
t1.SetAttribute("font-famliy", "宋体");
t1.SetAttribute("font-size", "6");
t1.InnerText = r1[2].ToString();
tlVectorControl1.SVGDocument.RootElement.AppendChild(t1);
}
}
tlVectorControl1.Refresh();
}
break;
case "m_fText":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows)
{
if (r1[0].ToString() != "")
{
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[9]);
WD = Convert.ToDecimal(r1[10]);
PointF fnt = mapview.ParseToPoint(JD, WD);
XmlElement t1 = tlVectorControl1.SVGDocument.CreateElement("text") as Text;
t1.SetAttribute("x", Convert.ToString(fnt.X / (float)tlVectorControl1.ScaleRatio + 8));
t1.SetAttribute("y", Convert.ToString(fnt.Y / (float)tlVectorControl1.ScaleRatio));
t1.SetAttribute("layer", SvgDocument.currentLayer);
t1.SetAttribute("style", "fill:#FFFFFF;fill-opacity:1;stroke:#000000;stroke-opacity:1;");
t1.SetAttribute("font-famliy", "宋体");
t1.SetAttribute("font-size", "6");
t1.InnerText = r1[1].ToString();
tlVectorControl1.SVGDocument.RootElement.AppendChild(t1);
}
}
tlVectorControl1.Refresh();
}
break;
case "m_inkbs":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows)
{
if (r1[0].ToString() != "")
{
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[12]);
WD = Convert.ToDecimal(r1[13]);
//IntXY xy = mapview.getXY(JD, WD);
PointF fnt = mapview.ParseToPoint(JD, WD);
if (r1[7].ToString() == "运行")
{
ele = tlVectorControl1.CreateBySymbolID("kbs-111", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
else
{
ele = tlVectorControl1.CreateBySymbolID("kbs-112", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
ele = tlVectorControl1.AddShape(ele, Point.Empty);
ele.SetAttribute("layer", tlVectorControl1.SVGDocument.CurrentLayer.ID);
//points = points + (-xy.X / (decimal)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (decimal)tlVectorControl1.ScaleRatio) + ",";
PSP_Gra_item item = new PSP_Gra_item();
item.UID = Guid.NewGuid().ToString();
item.EleKeyID = r1[1].ToString();
item.EleName = r1[2].ToString();
item.EleID = ele.ID;
item.LayerID = tlVectorControl1.SVGDocument.CurrentLayer.ID;
item.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
item.col1 = r1[7].ToString();
item.col2 = r1[3].ToString();
item.col3 = r1[4].ToString();
item.col4 = r1[5].ToString();
item.col5 = r1[6].ToString();
item.col6 = r1[8].ToString();
item.col7 = r1[9].ToString();
item.col8 = "kbs";
Services.BaseService.Create<PSP_Gra_item>(item);
}
}
}
break;
case "m_infjx":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows)
{
if (r1[0].ToString() != "")
{
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[9]);
WD = Convert.ToDecimal(r1[10]);
//IntXY xy = mapview.getXY(JD, WD);
PointF fnt = mapview.ParseToPoint(JD, WD);
if (r1[4].ToString() == "运行")
{
ele = tlVectorControl1.CreateBySymbolID("fjx-111", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
else
{
ele = tlVectorControl1.CreateBySymbolID("fjx-112", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
ele = tlVectorControl1.AddShape(ele, Point.Empty);
ele.SetAttribute("layer", tlVectorControl1.SVGDocument.CurrentLayer.ID);
//points = points + (-xy.X / (decimal)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (decimal)tlVectorControl1.ScaleRatio) + ",";
PSP_Gra_item item = new PSP_Gra_item();
item.UID = Guid.NewGuid().ToString();
item.EleKeyID = r1[2].ToString();
item.EleName = r1[1].ToString();
item.EleID = ele.ID;
item.LayerID = tlVectorControl1.SVGDocument.CurrentLayer.ID;
item.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
item.col1 = r1[4].ToString();
item.col2 = r1[3].ToString();
item.col3 = r1[5].ToString();
item.col4 = r1[6].ToString();
//item.col5 = r1[6].ToString();
//item.col6 = r1[8].ToString();
//item.col7 = r1[9].ToString();
item.col8 = "fjx";
Services.BaseService.Create<PSP_Gra_item>(item);
}
}
}
break;
case "m_inbyq":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows)
{
if (r1[0].ToString() != "")
{
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[9]);
WD = Convert.ToDecimal(r1[10]);
//IntXY xy = mapview.getXY(JD, WD);
PointF fnt = mapview.ParseToPoint(JD, WD);
if (r1[4].ToString() == "运行")
{
ele = tlVectorControl1.CreateBySymbolID("byq-111", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
else
{
ele = tlVectorControl1.CreateBySymbolID("byq-112", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
ele = tlVectorControl1.AddShape(ele, Point.Empty);
ele.SetAttribute("layer", tlVectorControl1.SVGDocument.CurrentLayer.ID);
//points = points + (-xy.X / (decimal)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (decimal)tlVectorControl1.ScaleRatio) + ",";
PSP_Gra_item item = new PSP_Gra_item();
item.UID = Guid.NewGuid().ToString();
item.EleKeyID = r1[2].ToString();
item.EleName = r1[1].ToString();
item.EleID = ele.ID;
item.LayerID = tlVectorControl1.SVGDocument.CurrentLayer.ID;
item.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
item.col1 = r1[4].ToString();
item.col2 = r1[3].ToString();
item.col3 = r1[5].ToString();
item.col4 = r1[6].ToString();
item.col8 = "byq";
Services.BaseService.Create<PSP_Gra_item>(item);
}
}
}
break;
#endregion
#region 未来联动
case "m_bxz":
//tlVectorControl1.GoLocation();
Gh_BXZ();
break;
case "m_jp":
tlVectorControl1.ClipScreen(true);
break;
case "m_ld":
if (SvgDocument.currentLayer == "")
{
MessageBox.Show("请选择图层", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (MessageBox.Show("确认要以当前选中年份为准调整以后年度的变电站及线路位置么？", "请确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes)
{
Linkage();
}
break;
case "m_fz":
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg")
{
MessageBox.Show("请选择图元", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
CopyEle();
break;
case "m_cx":
xltProcessor.GoLocation(tlVectorControl1.SVGDocument.SvgdataUid, frmlar.getSelectedLayer());
//XmlNodeList n1111 = tlVectorControl1.SVGDocument.SelectNodes("svg/polygon [@IsArea='1']");
//string a = "1";
break;
#endregion
#region 网架优化
case "OpenWJ":
ff = new frmGProg();
if (ff.ShowDialog() == DialogResult.OK)
{
Wjghboolflag = true;
checkwjghelement();
dotNetBarManager1.Bars["mainmenu"].GetItem("YHoperator").Enabled = true;
dotNetBarManager1.Bars["mainmenu"].GetItem("YHresult").Enabled = true;
dotNetBarManager1.Bars["mainmenu"].GetItem("ZTBut").Enabled = true;
dotNetBarManager1.Bars["mainmenu"].GetItem("JQBut").Enabled = false;
dotNetBarManager1.Bars["mainmenu"].GetItem("ZQBut").Enabled = false;
dotNetBarManager1.Bars["mainmenu"].GetItem("YQBut").Enabled = false;
}
else
{
Wjghboolflag = false;
}
break;
case "YHoperator":
break;
case "ghwj":
GHWPG();
break;
case "ZTBut":
dotNetBarManager1.Bars["mainmenu"].GetItem("ZTBut").Enabled = false;
dotNetBarManager1.Bars["mainmenu"].GetItem("JQBut").Enabled = true;
ElectricWjgh wjgh = new ElectricWjgh();
wjgh.initdat(ff.Key); //恢复数据的原来面貌
WaitDialogForm wait = null;
try
{
wait = new WaitDialogForm("", "正在处理数据, 请稍候...");
wjgh.jianxiancheck(ff.Key, 1, 100);
wait.Close();
MessageBox.Show("整体数据优化成功。");
string con = "WHERE Type='05' AND SUID in (select DeviceSUID from PSP_GprogElevice where GprogUID='" + ff.Key + "'and type='线路')";
IList list1 = Services.BaseService.GetList("SelectPSPDEVByCondition", con);
foreach (PSPDEV dev in list1)
{
PSP_GprogElevice pg = new PSP_GprogElevice();
pg.GprogUID = ff.Key;
pg.DeviceSUID = dev.SUID;
//先找到再修改
pg = (PSP_GprogElevice)Services.BaseService.GetObject("SelectPSP_GprogEleviceByKey", pg);
if (pg != null)
{
if (dev.LineStatus == "运行")
{
pg.ZTstatus = "运行";
pg.JQstatus = "运行";
pg.ZQstatus = "运行";
pg.YQstatus = "运行";
Services.BaseService.Update<PSP_GprogElevice>(pg);
}
else if (dev.LineStatus == "等待")
{
pg.ZTstatus = "等待";
pg.JQstatus = "等待";
pg.ZQstatus = "等待";
pg.YQstatus = "等待";
Services.BaseService.Update<PSP_GprogElevice>(pg);
}
else if (dev.LineStatus == "待选")
{
pg.ZTstatus = "待选";
Services.BaseService.Update<PSP_GprogElevice>(pg);
}
}
}
wjghmapview(1);
}
catch (Exception exc)
{
MessageBox.Show("数据存在问题，请检查后再继续！");
wait.Close();
return;
}
break;
case "JQBut":
dotNetBarManager1.Bars["mainmenu"].GetItem("JQBut").Enabled = false;
dotNetBarManager1.Bars["mainmenu"].GetItem("ZQBut").Enabled = true;
wjgh = new ElectricWjgh();
wjgh.JDlinecheck(ff.Key, 2);
JorJform selectmethod = new JorJform();
selectmethod.Text = "近期网架优化方法";
if (selectmethod.ShowDialog() == DialogResult.OK)
{
wait = new WaitDialogForm("", "正在处理数据, 请稍候...");
if (selectmethod.Mathindex == 0)
{
wjgh.jianxiancheck(ff.Key, 2, 100);
MessageBox.Show("近期数据减线优化成功。");
}
else if (selectmethod.Mathindex == 1)
{
wjgh.addlinecheck(ff.Key, 2, 100);
wjgh.addrightcheck(ff.Key, 2, 100);
for (int i = 0; i < wjgh.ercilinedengdai.Count; i++)
{
wjgh.ercilinedengdai[i].LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(wjgh.ercilinedengdai[i]);
}
for (int i = 0; i < wjgh.lineyiyou.Count; i++)
{
wjgh.lineyiyou[i].LineStatus = "待选";
Services.BaseService.Update<PSPDEV>(wjgh.lineyiyou[i]);
}
MessageBox.Show("近期数据加线成功。");
}
wait.Close();
//此处写项目jq变化状况
string conjq = "WHERE Type='05' AND SUID in (select DeviceSUID from PSP_GprogElevice where GprogUID='" + ff.Key + "'and type='线路'and ZTstatus in('待选'))";
IList list1jq = Services.BaseService.GetList("SelectPSPDEVByCondition", conjq);
foreach (PSPDEV dev in list1jq)
{
PSP_GprogElevice pg = new PSP_GprogElevice();
pg.GprogUID = ff.Key;
pg.DeviceSUID = dev.SUID;
//先找到再修改
pg = (PSP_GprogElevice)Services.BaseService.GetObject("SelectPSP_GprogEleviceByKey", pg);
if (pg != null)
{
if (dev.LineStatus == "等待")
{
pg.JQstatus = "待选";
Services.BaseService.Update<PSP_GprogElevice>(pg);
//dev.LineStatus = "待选";
//Services.BaseService.Update<PSPDEV>(dev);
}
else if (dev.LineStatus == "待选")
{
bool flag = false;
foreach (eleclass el in wjgh.JDlinecol)
{
if (dev.SUID == el.suid)
{
flag = true;
dev.LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(dev);
}
}
if (flag)
{
pg.JQstatus = "投放";
pg.ZQstatus = "运行";
pg.YQstatus = "运行";
}
else
{
pg.JQstatus = "待选";
}
Services.BaseService.Update<PSP_GprogElevice>(pg);
}
}
}
wjghmapview(2);
}
break;
case "ZQBut":
dotNetBarManager1.Bars["mainmenu"].GetItem("ZQBut").Enabled = false;
dotNetBarManager1.Bars["mainmenu"].GetItem("YQBut").Enabled = true;
wjgh = new ElectricWjgh();
wjgh.JDlinecheck(ff.Key, 3);
selectmethod = new JorJform();
selectmethod.Text = "中期网架优化方法";
if (selectmethod.ShowDialog() == DialogResult.OK)
{
wjghmapview(5);
wait = new WaitDialogForm("", "正在处理数据, 请稍候...");
if (selectmethod.Mathindex == 0)
{
wjgh.jianxiancheck(ff.Key, 3, 100);
MessageBox.Show("中期数据减线优化成功。");
}
else if (selectmethod.Mathindex == 1)
{
wjgh.addlinecheck(ff.Key, 3, 100);
wjgh.addrightcheck(ff.Key, 3, 100);
for (int i = 0; i < wjgh.ercilinedengdai.Count; i++)
{
wjgh.ercilinedengdai[i].LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(wjgh.ercilinedengdai[i]);
}
for (int i = 0; i < wjgh.lineyiyou.Count; i++)
{
wjgh.lineyiyou[i].LineStatus = "待选";
Services.BaseService.Update<PSPDEV>(wjgh.lineyiyou[i]);
}
MessageBox.Show("中期数据加线成功。");
}
wait.Close();
//此处写项目jq变化状况
string conzq = "WHERE Type='05' AND SUID in (select DeviceSUID from PSP_GprogElevice where GprogUID='" + ff.Key + "'and type='线路'and JQstatus in('待选'))";
IList list1zq = Services.BaseService.GetList("SelectPSPDEVByCondition", conzq);
foreach (PSPDEV dev in list1zq)
{
PSP_GprogElevice pg = new PSP_GprogElevice();
pg.GprogUID = ff.Key;
pg.DeviceSUID = dev.SUID;
//先找到再修改
pg = (PSP_GprogElevice)Services.BaseService.GetObject("SelectPSP_GprogEleviceByKey", pg);
if (pg != null)
{
if (dev.LineStatus == "等待")
{
pg.ZQstatus = "待选";
Services.BaseService.Update<PSP_GprogElevice>(pg);
//dev.LineStatus = "待选";
//Services.BaseService.Update<PSPDEV>(dev);
}
else if (dev.LineStatus == "待选")
{
bool flag = false;
foreach (eleclass el in wjgh.JDlinecol)
{
if (el.suid == dev.SUID)
{
flag = true;
dev.LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(dev);
}
}
if (flag)
{
pg.ZQstatus = "投放";
pg.YQstatus = "运行";
}
else
pg.ZQstatus = "待选";
Services.BaseService.Update<PSP_GprogElevice>(pg);
}
}
}
wjghmapview(3);
}
break;
case "YQBut":
dotNetBarManager1.Bars["mainmenu"].GetItem("YQBut").Enabled = false;
dotNetBarManager1.Bars["mainmenu"].GetItem("ZTBut").Enabled = true;
wjgh = new ElectricWjgh();
wjgh.JDlinecheck(ff.Key, 4);
wjghmapview(6);
selectmethod = new JorJform();
selectmethod.Text = "远期网架优化方法";
if (selectmethod.ShowDialog() == DialogResult.OK)
{
wait = new WaitDialogForm("", "正在处理数据, 请稍候...");
if (selectmethod.Mathindex == 0)
{
wjgh.jianxiancheck(ff.Key, 4, 100);
MessageBox.Show("远期数据减线优化成功。");
}
else if (selectmethod.Mathindex == 1)
{
wjgh.addlinecheck(ff.Key, 4, 100);
wjgh.addrightcheck(ff.Key, 4, 100);
for (int i = 0; i < wjgh.ercilinedengdai.Count; i++)
{
wjgh.ercilinedengdai[i].LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(wjgh.ercilinedengdai[i]);
}
for (int i = 0; i < wjgh.lineyiyou.Count; i++)
{
wjgh.lineyiyou[i].LineStatus = "待选";
Services.BaseService.Update<PSPDEV>(wjgh.lineyiyou[i]);
}
MessageBox.Show("远期数据加线成功。");
}
wait.Close();
//此处写项目jq变化状况
string conyq = "WHERE Type='05' AND SUID in (select DeviceSUID from PSP_GprogElevice where GprogUID='" + ff.Key + "'and type='线路'and ZQstatus in('待选'))";
IList list1yq = Services.BaseService.GetList("SelectPSPDEVByCondition", conyq);
// wjgh = new ElectricWjgh();
foreach (PSPDEV dev in list1yq)
{
PSP_GprogElevice pg = new PSP_GprogElevice();
pg.GprogUID = ff.Key;
pg.DeviceSUID = dev.SUID;
//先找到再修改
pg = (PSP_GprogElevice)Services.BaseService.GetObject("SelectPSP_GprogEleviceByKey", pg);
if (pg != null)
{
if (dev.LineStatus == "等待")
{
bool flag = false;
foreach (eleclass el in wjgh.JDlinecol)
{
if (el.suid == dev.SUID)
{
flag = true;
dev.LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(dev);
}
}
if (flag)
pg.YQstatus = "投放";
else
pg.YQstatus = "待选";
Services.BaseService.Update<PSP_GprogElevice>(pg);
//pg.YQstatus = "待选";
//Services.BaseService.Update<PSP_GprogElevice>(pg);
}
else if (dev.LineStatus == "待选")
{
bool flag = false;
foreach (eleclass el in wjgh.JDlinecol)
{
if (el.suid == dev.SUID)
{
flag = true;
dev.LineStatus = "运行";
Services.BaseService.Update<PSPDEV>(dev);
}
}
if (flag)
pg.YQstatus = "投放";
else
pg.YQstatus = "待选";
Services.BaseService.Update<PSP_GprogElevice>(pg);
}
}
}
wjghmapview(4);
}
break;
case "YHresult":
wjgh = new ElectricWjgh();
frmGProList p1 = new frmGProList();
p1.Show();
p1.LoadData(wjgh.LoadData(ff.Key));
break;
#endregion
#region 线路优选
case "bt_edit":
break;
case "bt_start":
if (linekey == "")
{
MessageBox.Show("请选择线路所属的方案。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_start";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_end":
if (sel_start_point == "")
{
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_end";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_must":
if (sel_start_point == "")
{
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_must";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_point":
if (sel_start_point == "")
{
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_point";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_make":
if (sel_start_point == "")
{
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
frmInputDialog frm_input = new frmInputDialog();
if (frm_input.ShowDialog() == DialogResult.OK)
{
SortedList orderlist = new SortedList();
XmlNodeList XLlist = tlVectorControl1.SVGDocument.SelectNodes("//*[@start_point=\"" + sel_start_point + "\"]");
try
{
for (int i = 0; i < XLlist.Count; i++)
{
XmlElement node = (XmlElement)XLlist[i];
orderlist.Add(Convert.ToInt32(node.GetAttribute("order")), node);
}
}
catch (Exception ex1)
{
MessageBox.Show("存在相同的节点顺序号，请修改。\n\r" + ex1.Message, "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
PointF[] _points = new PointF[XLlist.Count];
for (int i = 0; i < orderlist.Count; i++)
{
PointF[] f1 = new PointF[1] { new PointF(((Use)orderlist.GetByIndex(i)).X + 6, ((Use)orderlist.GetByIndex(i)).Y + 6) };
((Use)orderlist.GetByIndex(i)).Transform.Matrix.TransformPoints(f1);
_points[i] = f1[0];
}
string str_points = "";
for (int i = 0; i < _points.Length; i++)
{
str_points = str_points + _points[i].X + " " + _points[i].Y + ",";
}
if (str_points.Length > 1)
{
str_points = str_points.Substring(0, str_points.Length - 1);
}
XmlElement _templine = tlVectorControl1.SVGDocument.CreateElement("polyline") as Polyline;
_templine.SetAttribute("IsLead", "1");
_templine.SetAttribute("points", str_points);
_templine.SetAttribute("layer", SvgDocument.currentLayer);
Random dom = new Random();
int int_d = dom.Next(99999);
string styleValue = "stroke:" + ColorTranslator.ToHtml(Color.FromArgb(int_d));
_templine.SetAttribute("style", styleValue);
XmlNode tt_node = tlVectorControl1.SVGDocument.RootElement.AppendChild(_templine);
LineInfo gh_line = new LineInfo();
gh_line.UID = Guid.NewGuid().ToString();
gh_line.EleID = _templine.GetAttribute("id");
gh_line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
Services.BaseService.Create<LineInfo>(gh_line);
tlVectorControl1.Refresh();
if (MessageBox.Show("是否删除该线路的参考点？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes)
{
tlVectorControl1.SVGDocument.SelectCollection.Clear();
for (int i = 0; i < XLlist.Count; i++)
{
if (((SvgElement)XLlist[i]).GetAttribute("xlink:href").Contains("XL_GT_4") || ((SvgElement)XLlist[i]).GetAttribute("xlink:href").Contains("XL_GT_3"))
{
tlVectorControl1.SVGDocument.SelectCollection.Add((SvgElement)XLlist[i]);
}
}
tlVectorControl1.Delete();
}
string str = "";
LineList1 line1 = new LineList1();
line1.UID = Guid.NewGuid().ToString();
//line1.LineEleID = tlVectorControl1.SVGDocument.CurrentElement.ID;
line1.PointNum = ((Polyline)(tt_node)).Points.Length - 2;
line1.Coefficient = (decimal)(1.02);
line1.Length = TLMath.getPolylineLength(((Polyline)(tt_node)), Convert.ToDecimal(tlVectorControl1.ScaleRatio));
line1.Length2 = TLMath.getPolylineLength(((Polyline)(tt_node)), Convert.ToDecimal(tlVectorControl1.ScaleRatio)) * Convert.ToDecimal(1.02);
PointF[] pnt = ((Polyline)(tt_node)).Points;
if (pnt.Length < 3) return;
for (int i = 0; i < pnt.Length; i++)
{
double ang = TLMath.getLineAngle(pnt[i], pnt[i + 1], pnt[i + 2]);
if (ang * 57.3 > 60)
{
MessageBox.Show("线路转角不能大于60度。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
tlVectorControl1.Delete();
return;
}
str = str + "第" + (i + 1) + "转角：" + Convert.ToDouble(ang * 57.3).ToString("##.##") + "度。\r\n";
if (i == pnt.Length - 3)
{
break;
}
}
line1.TurnAngle = str;
line1.col1 = linekey;
line1.LineName = frm_input.InputStr;
line1.LineEleID = ((SvgElement)tt_node).ID;
Services.BaseService.Create<LineList1>(line1);
sel_start_point = "";
tlVectorControl1.Operation = ToolOperation.Select;
}
break;
case "Niula":
Wjghboolflag = false;
OpenProject op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK)
{
if (op.FileSUID != null)
{
Psptypeform pt = new Psptypeform();
if (pt.ShowDialog() == DialogResult.OK)
{
frnReport wFrom = new frnReport();
wFrom.Owner = this;
wFrom.Show();
wFrom.Text = this.Text + "—牛拉法潮流计算";
wFrom.ShowText += "正在收集信息\t" + System.DateTime.Now.ToString();
ElectricLoadCal elc = new ElectricLoadCal();
elc.LFC(op.FileSUID, 1, 100, wFrom);
ShowResult(0, op.FileSUID, op.FileName, pt.PspOuttype, wFrom);
}
}
}
break;
case "pq":
Wjghboolflag = false;
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK)
{
if (op.FileSUID != null)
{
Psptypeform pt = new Psptypeform();
if (pt.ShowDialog() == DialogResult.OK)
{
frnReport wFrom = new frnReport();
wFrom.Owner = this;
wFrom.Show();
wFrom.Text = this.Text + "—PQ法潮流计算";
wFrom.ShowText += "正在收集信息\t" + System.DateTime.Now.ToString();
ElectricLoadCal elc = new ElectricLoadCal();
ElectricLoadCal elcPQ = new ElectricLoadCal();
elcPQ.LFC(op.FileSUID, 2, 100, wFrom);
// elcPQ.LFCER(op.FileSUID, 2, 100);
ShowResult(1, op.FileSUID, op.FileName, pt.PspOuttype, wFrom);
}
}
}
break;
case "GausSeidel":
Wjghboolflag = false;
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK)
{
if (op.FileSUID != null)
{
Psptypeform pt = new Psptypeform();
if (pt.ShowDialog() == DialogResult.OK)
{
frnReport wFrom = new frnReport();
wFrom.Owner = this;
wFrom.Show();
wFrom.Text = this.Text + "—高斯赛德尔迭代法潮流计算";
wFrom.ShowText += "正在收集信息\t" + System.DateTime.Now.ToString();
ElectricLoadCal elc = new ElectricLoadCal();
ElectricLoadCal elcGS = new ElectricLoadCal();
elcGS.LFC(op.FileSUID, 3, 100, wFrom);
ShowResult(2, op.FileSUID, op.FileName, pt.PspOuttype, wFrom);
}
}
}
break;
case "N_RZYz":
Wjghboolflag = false;
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK)
{
if (op.FileSUID != null)
{
Psptypeform pt = new Psptypeform();
if (pt.ShowDialog() == DialogResult.OK)
{
frnReport wFromZYZ = new frnReport();
wFromZYZ.Owner = this;
wFromZYZ.Show();
wFromZYZ.Text = this.Text + "—最有乘子法潮流计算";
wFromZYZ.ShowText += "正在收集信息\t" + System.DateTime.Now.ToString();
ElectricLoadCal elcN_RZYz = new ElectricLoadCal();
elcN_RZYz.LFC(op.FileSUID, 4, 100, wFromZYZ);
ShowResult(3, op.FileSUID, op.FileName, pt.PspOuttype, wFromZYZ);
}
}
}
break;
case "NLnFH":
Wjghboolflag = false;
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK)
{
if (op.FileSUID != null)
{
Psptypeform pt = new Psptypeform();
if (pt.ShowDialog() == DialogResult.OK)
{
frnReport wFromZYZ = new frnReport();
wFromZYZ.Owner = this;
wFromZYZ.Show();
wFromZYZ.Text = this.Text + "—最有乘子法潮流计算";
wFromZYZ.ShowText += "正在收集信息\t" + System.DateTime.Now.ToString();
ElectricLoadCal elcN_RZYz = new ElectricLoadCal();
elcN_RZYz.LFCS(op.FileSUID, 4, 100);
ShowResult(3, op.FileSUID, op.FileName, pt.PspOuttype, wFromZYZ);
}
}
}
break;
#endregion
}
}
}
private void dotNetBarManager1_ItemClick(object sender, EventArgs e)
{
DevComponents.DotNetBar.ButtonItem btItem = sender as DevComponents.DotNetBar.ButtonItem;
//Layer layer1 = (Layer)LayerBox.ComboBoxEx.SelectedItem;
if (btItem != null) {
if (btItem.Name == "mRoam") {
frmlar.Hide();
} else {
frmlar.Show();
}
switch (btItem.Name) {
#region 文件操作
case "mNew":
tlVectorControl1.NewFile();
break;
case "mOpen":
break;
case "mImport":
ExportImage();
//ImportDxf();
break;
case "ImportDxf":
ImportDxf();
break;
case "btExSymbol":
tlVectorControl1.ExportSymbol();
break;
case "mSave":
SaveButton();
break;
case "mSaveSVG":
tlVectorControl1.SaveAs();
break;
case "mExit":
//XmlElement s= (XmlElement)tlVectorControl1.SVGDocument.SelectCollection[0];
//Polygon p = (Polygon)s;
//tlVectorControl1.SymbolSelector = this.symbolSelector;
//tlVectorControl1.ExportSymbol();
//tlVectorControl1.CurrentOperation = ToolOperation.WindowZoom;
//frmLayerList ff = new frmLayerList();
//ff.InitData(tlVectorControl1.SVGDocument.getLayerList());
//ff.Show();
//string aa = tlVectorControl1.SVGDocument.SvgdataUid;
////tlVectorControl1.NewFile();
//tlVectorControl1.OpenFile("d:\\2.svg");
//tlVectorControl1.SVGDocument.SvgdataUid = aa;
//IList<LineInfo> list = Services.BaseService.GetList<LineInfo>("SelectLineInfoBySvgIDAll", line);
this.Close();
//frmAddLine ff = new frmAddLine();
//ff.Show();
//tlVectorControl1.ExportSymbol();
//XmlNodeList n1111 = tlVectorControl1.SVGDocument.SelectNodes("svg/polyline [@IsLead='1']");
//for (int i = 0; i < n1111.Count; i++)
//{
// XmlNode n1 = n1111[i];
// string na = ((XmlElement)n1).GetAttribute("info-name");
// string la = ((XmlElement)n1).GetAttribute("layer");
// string id = ((XmlElement)n1).GetAttribute("id");
// LineInfo ll = new LineInfo();
// ll.LineName = " LineName='" + na + "' and LayerID='" + la + "' and SvgUID='" + tlVectorControl1.SVGDocument.SvgdataUid + "'";
// ll = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByWhere", ll);
// if (ll != null)
// {
// ll.EleID = id;
// if (ll.Length == "")
// {
// ll.Length = "0";
// }
// Services.BaseService.Update<LineInfo>(ll);
// }
//}
//XmlNodeList list1 = tlVectorControl1.SVGDocument.SelectNodes("//*[@href=\"#实心杆塔0\"]");
//XmlNodeList list2 = tlVectorControl1.SVGDocument.SelectNodes("//*[@href=\"#实心杆塔1\"]");
//for (int i = 0; i < list1.Count; i++)
//{
// tlVectorControl1.SVGDocument.RootElement.RemoveChild(list1[i]);
//}
//for (int j = 0; j < list2.Count; j++)
//{
// tlVectorControl1.SVGDocument.RootElement.RemoveChild(list2[j]);
//}
//InitTK();
//XmlElement a = tlVectorControl1.SVGDocument.RootElement;
//a.SetAttribute("height","3000");
//tlVectorControl1.Refresh();
//XmlElement b = tlVectorControl1.SVGDocument.GetElementById("circle49171");
//string a = tlVectorControl1.SVGDocument.OuterXml;
//Hashtable hs = new Hashtable();
//XmlNodeList list = tlVectorControl1.SVGDocument.GetElementsByTagName("symbol");
//for (int i = 0; i < list.Count; i++)
//{
// XmlNode node = list[i];
// hs.Add(i, node);
// //((XmlElement)node).SetAttribute("id", "xxx" + i.ToString());
//}
break;
case "bt1":
InitTK();
break;
case "callCAD":
try {
//Autodesk.AutoCAD.Interop.
if (MessageBox.Show("此操作需要花费较长时间，确认导出么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes) {
CAD cad = new CAD();
cad.tlVectorControl1 = tlVectorControl1;
cad.WriteDwg("ALL");
}
} catch {
MessageBox.Show("请安装AutoCAD2006或以上版本。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "callCADSub":
try {
//Autodesk.AutoCAD.Interop.AcadApplicationClass a = new Autodesk.AutoCAD.Interop.AcadApplicationClass();
if (MessageBox.Show("此操作需要花费较长时间，确认导出么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes) {
CAD cad = new CAD();
cad.tlVectorControl1 = tlVectorControl1;
string strlar = frmlar.getSelectedLayer();
cad.WriteDwg(strlar);
}
} catch {
MessageBox.Show("请安装AutoCAD2006或以上版本。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mPriSet":
tlVectorControl1.PaperSetup();
break;
case "mPrint":
tlVectorControl1.Print();
break;
case "mView":
//frmSvgView fView = new frmSvgView();
//fView.Open(tlVectorControl1.SVGDocument.SvgdataUid);
//fView.Show();
break;
case "mViewScale":
if (img != null) {
frmtempViewScale fscale1 = new frmtempViewScale();
fscale1.ShowDialog();
} else {
frmViewScale fScale = new frmViewScale();
string viewScale = tlVectorControl1.SVGDocument.getViewScale();
if (viewScale != "") {
fScale.InitData(viewScale);
}
if (fScale.ShowDialog() == DialogResult.OK) {
//viewScale = fScale.ViewScale;
string _viewScale = fScale.ViewScale;
tlVectorControl1.SVGDocument.setViewScale(_viewScale);
if (viewScale == "") {
viewScale = "1";
}
Recalculate(Convert.ToDecimal(_viewScale) / Convert.ToDecimal(viewScale));
}
}
break;
//case "mIncreaseView":
// tlVectorControl1.Operation = ToolOperation.IncreaseView;
// break;
case "mRzb":
frmRatio fRat = new frmRatio();
string viewRat = tlVectorControl1.SVGDocument.getRZBRatio();
if (viewRat != "") {
fRat.InitData(viewRat);
}
if (fRat.ShowDialog() == DialogResult.OK) {
viewRat = fRat.ViewScale;
tlVectorControl1.SVGDocument.setRZBRatio(viewRat);
}
break;
case "mEdit":
if (MapType == "所内接线图") {
Save();
dotNetBarManager1.Bars["mainmenu"].GetItem("ImportDxf").Visible = false;
svg.SUID = ParentUID;
IList svglist = Services.BaseService.GetList("SelectSVGFILEByKey", svg);
svg = (SVGFILE)svglist[0];
sdoc = null;
sdoc = new SvgDocument();
sdoc.LoadXml(svg.SVGDATA);
tlVectorControl1.SVGDocument = sdoc;
tlVectorControl1.SVGDocument.SvgdataUid = svg.SUID;
MapType = "接线图";
CtrlSvgView.MapType = "接线图";
LoadShape("symbol_3.xml");
Init(progtype);
//ButtonEnb(true);
frmlar.SymbolDoc = tlVectorControl1.SVGDocument;
frmlar.Progtype = progtype;
frmlar.InitData();
dotNetBarManager1.Bars["mainmenu"].GetItem("ButtonItem2").Enabled = true;
dotNetBarManager1.Bars["mainmenu"].GetItem("ButtonItem7").Enabled = true;
bk1.Enabled = true;
LoadImage = true;
tlVectorControl1.Refresh();
}
tlVectorControl1.ContextMenuStrip = contextMenuStrip1;
MapType = "接线图";
break;
case "mAbout":
frmAbout frma = new frmAbout();
frma.ShowDialog();
break;
//基础操作
case "mFreeTransform":
tlVectorControl1.Operation = ToolOperation.FreeTransform;
break;
case "mRoam1":
tlVectorControl1.Operation = ToolOperation.Roam;
break;
case "mShapeTransform1":
tlVectorControl1.Operation = ToolOperation.Custom11;
break;
case "mShapeTransform2":
tlVectorControl1.Operation = ToolOperation.Custom12;
break;
case "mShapeTransform3":
tlVectorControl1.Operation = ToolOperation.Custom13;
break;
case "mShapeTransform4":
tlVectorControl1.Operation = ToolOperation.Custom15;
break;
case "mShapeTransform5":
tlVectorControl1.Operation = ToolOperation.Custom14;
break;
case "m_ljxl":
ConnLine();
break;
case "mAngleRectangle1":
tlVectorControl1.Operation = ToolOperation.AngleRectangle;
break;
case "mSelect1":
case "mSel1":
//tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.FreeTransform;
break;
case "mLine1":
tlVectorControl1.Operation = ToolOperation.Line;
break;
case "mPolyline1":
tlVectorControl1.Operation = ToolOperation.PolyLine;
break;
case "mImage1":
tlVectorControl1.Operation = ToolOperation.Image;
break;
case "mText1":
tlVectorControl1.Operation = ToolOperation.Text;
break;
case "mEllipse1":
tlVectorControl1.Operation = ToolOperation.Ellipse;
break;
case "mBezier1":
tlVectorControl1.Operation = ToolOperation.Bezier;
break;
//图元操作
case "mCopy1":
tlVectorControl1.Copy();
break;
case "mCut1":
tlVectorControl1.Cut();
break;
case "mPaste1":
PasteWithProperty();
break;
case "mDelete1":
if (tlVectorControl1.SVGDocument.CurrentElement != null && tlVectorControl1.SVGDocument.CurrentElement.ID != "svg") {
frmMessageBox msg = new frmMessageBox();
if (msg.ShowDialog() == DialogResult.OK) {
if (msg.ck) {
// if(MessageBox.Show("确认删除么？","提示",MessageBoxButtons.YesNo,MessageBoxIcon.Information)==DialogResult.Yes){
for (int i = 0; i < tlVectorControl1.SVGDocument.SelectCollection.Count; i++) {
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polygon") {
glebeProperty gle = new glebeProperty();
gle.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
gle.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
Services.BaseService.Update("DeleteglebePropertyByEleID", gle);
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polyline" || tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Line") {
LineInfo _line = new LineInfo();
_line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_line.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
LineInfo temp = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", _line);
if (temp != null) {
Services.BaseService.Update("DeleteLinePropertyByEleID", _line);
Services.BaseService.Update("DeleteLine_InfoByCode", temp.UID);
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Use") {
string str_name = ((XmlElement)(tlVectorControl1.SVGDocument.SelectCollection[i])).GetAttribute("xlink:href");
if (str_name.Contains("Substation")) {
substation _sub = new substation();
_sub.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_sub.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
substation temp = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", _sub);
if (temp != null) {
Services.BaseService.Update("DeletesubstationByEleID", _sub);
Services.BaseService.Update("DeleteSubstation_InfoByCode", temp.UID);
}
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.ConnectLine") {
ConnectLine cline = (ConnectLine)tlVectorControl1.SVGDocument.SelectCollection[i];
if (cline.StartGraph != null) {
SvgElement ele = (SvgElement)cline.StartGraph;
if (!ele.GetAttribute("xlink:href").Contains("Substation")) {
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.StartGraph);
}
}
if (cline.EndGraph != null) {
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.EndGraph);
}
}
}
} else {
for (int i = 0; i < tlVectorControl1.SVGDocument.SelectCollection.Count; i++) {
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polyline" || tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Line") {
LineInfo _line = new LineInfo();
_line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_line.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
LineInfo linetemp = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", _line);
if (linetemp != null) {
PowerProTypes temp = (PowerProTypes)Services.BaseService.GetObject("SelectPowerProTypesByCode", linetemp.UID);
if (temp != null) {
linetemp.EleID = "";
Services.BaseService.Update<LineInfo>(linetemp);
} else {
Services.BaseService.Update("DeleteLineInfo", linetemp);
}
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Use") {
string str_name = ((XmlElement)(tlVectorControl1.SVGDocument.SelectCollection[i])).GetAttribute("xlink:href");
if (str_name.Contains("Substation")) {
substation _sub = new substation();
_sub.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
_sub.EleID = tlVectorControl1.SVGDocument.SelectCollection[i].ID;
substation subtemp = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", _sub);
if (subtemp != null) {
PowerProTypes temp = (PowerProTypes)Services.BaseService.GetObject("SelectPowerProTypesByCode", subtemp.UID);
if (temp != null) {
subtemp.EleID = "";
Services.BaseService.Update<substation>(subtemp);
} else {
Services.BaseService.Update("Deletesubstation", subtemp);
}
}
}
}
if (tlVectorControl1.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.ConnectLine") {
ConnectLine cline = (ConnectLine)tlVectorControl1.SVGDocument.SelectCollection[i];
if (cline.StartGraph != null) {
SvgElement ele = (SvgElement)cline.StartGraph;
if (!ele.GetAttribute("xlink:href").Contains("Substation")) {
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.StartGraph);
}
}
if (cline.EndGraph != null) {
tlVectorControl1.SVGDocument.SelectCollection.Add(cline.EndGraph);
}
}
}
}
tlVectorControl1.Delete();
}
}
//tlVectorControl1.Operation = ToolOperation.Select;
break;
case "mUodo1":
tlVectorControl1.Undo();
break;
case "mRedo1":
tlVectorControl1.Redo();
break;
case "mAlign1":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.Align(AlignType.Left);
} else {
tlVectorControl1.Align(AlignType.Left);
}
tlVectorControl1.Refresh();
break;
case "mAlignLeft1":
tlVectorControl1.Align(AlignType.Left);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignRight1":
tlVectorControl1.Align(AlignType.Right);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignTop1":
tlVectorControl1.Align(AlignType.Top);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignBottom1":
tlVectorControl1.Align(AlignType.Bottom);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignHorizontalCenter1":
tlVectorControl1.Align(AlignType.HorizontalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignVerticalCenter1":
tlVectorControl1.Align(AlignType.VerticalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mOrder1":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.ChangeLevel(LevelType.Top);
} else {
tlVectorControl1.ChangeLevel(LevelType.Top);
}
break;
case "mGoTop1":
tlVectorControl1.ChangeLevel(LevelType.Top);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoUp1":
tlVectorControl1.ChangeLevel(LevelType.Up);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoDown1":
tlVectorControl1.ChangeLevel(LevelType.Down);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoBottom1":
tlVectorControl1.ChangeLevel(LevelType.Bottom);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mRotate1":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.FlipX();
} else {
tlVectorControl1.FlipX();
}
break;
case "mToH1":
tlVectorControl1.FlipX();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToV1":
tlVectorControl1.FlipY();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToLeft1":
tlVectorControl1.RotateSelection(-90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToRight1":
tlVectorControl1.RotateSelection(90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
//图形操作
case "mLeadLine1":
//tlVectorControl1.DrawArea.BackgroundImage = System.Drawing.Image.FromFile("f:\\back11.jpg");
//tlVectorControl1.DrawArea.BackgroundImageLayout = ImageLayout.Center;
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("电网规划层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
// sgt1.Visible = true;
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.LeadLine;
break;
case "mAreaPoly1":
if (!getlayer(SvgDocument.currentLayer, "城市规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("城市规划层"))
{
MessageBox.Show("请选择城市规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.AreaPolygon;
break;
case "mFzzj1": //放置注记
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
//LayerBox.ComboBoxEx.SelectedIndex = 2;
tlVectorControl1.Operation = ToolOperation.Select;
MapType = "规划统计";
break;
case "mPriQu1":
SubPrint = true;
tlVectorControl1.Operation = ToolOperation.InterEnclosurePrint;
break;
case "mReCompute1":
if (MessageBox.Show("确认要重新计算全图的电量和负荷么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes) {
string scale = tlVectorControl1.SVGDocument.getViewScale();
if (scale != "") {
Recalculate(Convert.ToDecimal(scale));
} else {
Recalculate(1);
}
MessageBox.Show("重新计算完成", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mFhbz1":
if (MessageBox.Show("是否生成负荷标注?", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes) {
Fhbz();
}
break;
case "mCJ":
tlVectorControl1.Operation = ToolOperation.PolyLine;
csOperation = CustomOperation.OP_MeasureDistance;
break;
#endregion
#region 基础图元
case "mDecreaseView":
tlVectorControl1.Operation = ToolOperation.DecreaseView;
break;
case "mIncreaseView":
tlVectorControl1.Operation = ToolOperation.IncreaseView;
break;
case "mRoam":
tlVectorControl1.Operation = ToolOperation.Roam;
break;
case "mSelect":
case "mSel":
//tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.FreeTransform;
sel_sym = "";
sel_start_point = "";
break;
//case "mFreeTransform":
// tlVectorControl1.Operation = ToolOperation.FreeTransform;
// break;
case "mFreeLines"://锁套
tlVectorControl1.Operation = ToolOperation.FreeLines;
break;
case "mFreePath":
tlVectorControl1.Operation = ToolOperation.FreePath;
break;
case "mShapeTransform":
tlVectorControl1.Operation = ToolOperation.ShapeTransform;
break;
case "mAngleRectangle":
tlVectorControl1.Operation = ToolOperation.AngleRectangle;
break;
case "mEllipse":
tlVectorControl1.Operation = ToolOperation.Ellipse;
break;
case "mLine":
tlVectorControl1.Operation = ToolOperation.Line;
break;
case "mPolyline":
tlVectorControl1.Operation = ToolOperation.PolyLine;
break;
case "mPolygon":
tlVectorControl1.Operation = ToolOperation.Polygon;
break;
case "mImage":
tlVectorControl1.Operation = ToolOperation.Image;
break;
case "mText":
tlVectorControl1.Operation = ToolOperation.Text;
break;
case "mBezier":
tlVectorControl1.Operation = ToolOperation.Bezier;
break;
case "mEnclosure":
tlVectorControl1.Operation = ToolOperation.Enclosure;
break;
case "mGroup":
tlVectorControl1.Group();
break;
case "mUnGroup":
tlVectorControl1.UnGroup();
break;
case "mlinelx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Line;
break;
case "mzxlx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Rightangle;
break;
case "mqxlx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Spline;
break;
case "mqzlx":
tlVectorControl1.Operation = ToolOperation.ConnectLine_Polyline;
break;
case "mCJ1":
tlVectorControl1.Operation = ToolOperation.PolyLine;
csOperation = CustomOperation.OP_MeasureDistance;
break;
#endregion
#region 视图
case "mOption":
tlVectorControl1.SetOption();
break;
case "mLayer":
LayerManagerShow();
//tlVectorControl1.LayerManager();
break;
case "mAirscape":
frmAirscape fAir = new frmAirscape();
fAir.InitData(tlVectorControl1);
fAir.Owner = this;
fAir.ShowInTaskbar = false;
fAir.Top = Screen.PrimaryScreen.WorkingArea.Height - 250;
fAir.Left = Screen.PrimaryScreen.WorkingArea.Width - 300;
fAir.Show();
break;
case "btTL":
frmGlebeTypeList fgle = new frmGlebeTypeList();
fgle.Show();
break;
case "mMapOpacity"://地图透明度
frmMapSetup dlg = new frmMapSetup();
dlg.MapOpacity = this.MapOpacity;
if (dlg.ShowDialog() == DialogResult.OK) {
this.MapOpacity = dlg.MapOpacity;
}
break;
#endregion
#region 查看
case "mDklb":
//SaveAllLayer();
frmLayerList lay = new frmLayerList();
lay.InitData(tlVectorControl1.SVGDocument.getLayerList(), "1");
if (lay.ShowDialog() == DialogResult.OK) {
frmglebePropertyList flist1 = new frmglebePropertyList();
flist1.InitDataSub(tlVectorControl1.SVGDocument.SvgdataUid, lay.str_sid);
flist1.Show();
}
break;
case "m_dktj":
frmLayerList layn = new frmLayerList();
layn.InitData(tlVectorControl1.SVGDocument.getLayerList(), "1");
if (layn.ShowDialog() == DialogResult.OK) {
frmglebePropertyZHList flist1 = new frmglebePropertyZHList();
flist1.InitDataSub(tlVectorControl1.SVGDocument.SvgdataUid, layn.str_sid);
flist1.Show();
}
break;
case "mGhlb":
frmLayerList lay2 = new frmLayerList();
lay2.InitData(tlVectorControl1.SVGDocument.getLayerList(), "2");
if (lay2.ShowDialog() == DialogResult.OK) {
frmglebePropertyList flist2 = new frmglebePropertyList();
flist2.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay2.str_sid);
flist2.Show();
}
break;
case "mLineList":
frmLayerList lay3 = new frmLayerList();
lay3.InitData(tlVectorControl1.SVGDocument.getLayerList(), "2");
if (lay3.ShowDialog() == DialogResult.OK) {
frmLinePropertyList flist3 = new frmLinePropertyList();
flist3.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay3.str_sid);
flist3.Show();
}
break;
case "mDlph":
frmLayerList lay4 = new frmLayerList();
lay4.InitData(tlVectorControl1.SVGDocument.getLayerList(), "3");
if (lay4.ShowDialog() == DialogResult.OK) {
frmSubstationPropertyList fSub = new frmSubstationPropertyList();
fSub.InitData(tlVectorControl1.SVGDocument.SvgdataUid, lay4.str_sid);
fSub.Show();
}
break;
case "ButtonJXT":
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg" || (tlVectorControl1.SVGDocument.CurrentElement.GetType().ToString()) != "ItopVector.Core.Figure.Use") {
MessageBox.Show("没有选择变电站！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
ParentUID = tlVectorControl1.SVGDocument.SvgdataUid;
Save();
ParentUID = tlVectorControl1.SVGDocument.SvgdataUid;
SVGFILE svg_temp = new SVGFILE();
svg_temp.SUID = ((XmlElement)tlVectorControl1.SVGDocument.CurrentElement).GetAttribute("id");
svg_temp.FILENAME = getBdzName(svg_temp.SUID);//
IList svglist1 = Services.BaseService.GetList("SelectSVGFILEByKey", svg_temp);
OpenJXT(svglist1, svg_temp);
//frmlar.SymbolDoc = tlVectorControl1.SVGDocument;
//frmlar.Progtype = MapType;
//frmlar.InitData();
//JxtBar();
break;
#endregion
#region 布局，对齐，顺序
case "mRotate":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.FlipX();
} else {
tlVectorControl1.FlipX();
}
break;
case "mToH":
tlVectorControl1.FlipX();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToV":
tlVectorControl1.FlipY();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToLeft":
tlVectorControl1.RotateSelection(-90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToRight":
tlVectorControl1.RotateSelection(90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mAlign":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.Align(AlignType.Left);
} else {
tlVectorControl1.Align(AlignType.Left);
}
tlVectorControl1.Refresh();
break;
case "mAlignLeft":
tlVectorControl1.Align(AlignType.Left);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignRight":
tlVectorControl1.Align(AlignType.Right);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignTop":
tlVectorControl1.Align(AlignType.Top);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignBottom":
tlVectorControl1.Align(AlignType.Bottom);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignHorizontalCenter":
tlVectorControl1.Align(AlignType.HorizontalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mAlignVerticalCenter":
tlVectorControl1.Align(AlignType.VerticalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl1.Refresh();
break;
case "mOrder":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl1.ChangeLevel(LevelType.Top);
} else {
tlVectorControl1.ChangeLevel(LevelType.Top);
}
break;
case "mGoTop":
tlVectorControl1.ChangeLevel(LevelType.Top);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoUp":
tlVectorControl1.ChangeLevel(LevelType.Up);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoDown":
tlVectorControl1.ChangeLevel(LevelType.Down);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoBottom":
tlVectorControl1.ChangeLevel(LevelType.Bottom);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
#endregion
#region 图元操作
case "mCopy":
tlVectorControl1.Copy();
break;
case "mCut":
tlVectorControl1.Cut();
break;
case "mPaste":
//tlVectorControl1.Paste();
PasteWithProperty();
break;
case "mDelete":
Delete();
//tlVectorControl1.Operation = ToolOperation.Select;
break;
case "mUodo":
tlVectorControl1.Undo();
break;
case "mRedo":
tlVectorControl1.Redo();
break;
#endregion
#region 业务操作
case "m_line1": //线路走廊优化
frmPlanList f = new frmPlanList();
if (f.ShowDialog() == DialogResult.Yes) {
linekey = f.Key;
tlVectorControl1.Operation = ToolOperation.Select;
//tlVectorControl1.Operation = ToolOperation.LeadLine;
}
break;
case "m_subxz": //变电站选址
frmSubstationManager mng = new frmSubstationManager();
DialogResult dia = mng.ShowDialog();
if (dia == DialogResult.OK) {
XZ_bdz = mng.code;
MessageBox.Show("请选择变电站拖放置到希望的位置。");
}
if (dia == DialogResult.Ignore) {
string keyid = mng.KeyID;
string suid = mng.SUID;
PSP_SubstationUserNum n1 = new PSP_SubstationUserNum();
n1.col2 = keyid;
IList<PSP_SubstationUserNum> list1 = Services.BaseService.GetList<PSP_SubstationUserNum>("SelectPSP_SubstationNum2", n1);
for (int i = 0; i < list1.Count; i++) {
if (suid != list1[i].SubStationID) {
PSP_SubstationSelect s = new PSP_SubstationSelect();
s.UID = list1[i].SubStationID;
s.EleID = list1[i].userID;
XmlNodeList nnn1 = tlVectorControl1.SVGDocument.SelectNodes("//* [@id='" + s.EleID + "']");
foreach (XmlNode node1 in nnn1) {
tlVectorControl1.SVGDocument.RootElement.RemoveChild(node1);
}
Services.BaseService.Update("DeletePSP_SubstationSelect", s);
}
}
tlVectorControl1.Refresh();
}
break;
case "mSubPrint":
//tlVectorControl1.CurrentOperation = ToolOperation.InterEnclosure;
//SubPrint = true;
//frmSubPrint s = new frmSubPrint();
////s.Open(tlVectorControl1.SVGDocument);
//s.Show();
Hashtable HashTable1 = new Hashtable();
HashTable1.Add("SUID", tlVectorControl1.SVGDocument.SvgdataUid);
Services.BaseService.Update("UpdateGlebePropertyAll", HashTable1);
break;
case "ORP":
OpenProject orp = new OpenProject();
orp.ProjectID = Itop.Client.MIS.ProgUID;
orp.Initdata(false);
if (orp.ShowDialog() == DialogResult.OK)
{
if (orp.FileSUID != null)
{
ElectricLoadCal elcORP = new ElectricLoadCal();
elcORP.ORP(orp.FileSUID, 100);
}
}
break;
case "mJQLeadLine":
tlVectorControl1.Operation = ToolOperation.Select;
frmAddLine aLine = new frmAddLine();
if (aLine.ShowDialog() == DialogResult.OK) {
string points = "";
ArrayList list = aLine.list;
LineInfo line = aLine.line;
string lineWidth = aLine.LineWidth;
//ICollection Ilist = list.Values;
//IEnumerator IEnum=Ilist.GetEnumerator();
for (int n = 0; n < list.Count; n++) {
//while (IEnum.MoveNext())
//{
string[] str = ((string)list[n]).Split(',');
//string[] str = ((string)IEnum.Current).Split(',');
string[] JWD1 = str[0].Split(' ');
Double J1 = Convert.ToDouble(JWD1[0]);
Double W1 = Convert.ToDouble(JWD1[1]);
Double D1 = Convert.ToDouble(JWD1[2]);
string[] JWD2 = str[1].Split(' ');
Double J2 = Convert.ToDouble(JWD2[0]);
Double W2 = Convert.ToDouble(JWD2[1]);
Double D2 = Convert.ToDouble(JWD2[2]);
Double JD = J1 + W1 / 60 + D1 / 3600;
Double WD = J2 + W2 / 60 + D2 / 3600;
IntXY xy = mapview.getXY(JD, WD);
points = points + (-xy.X / (Double)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (Double)tlVectorControl1.ScaleRatio) + ",";
//}
}
if (points.Length > 1) {
points = points.Substring(0, points.Length - 1);
}
//string styleValue = "";
//if (line.ObligateField1 == "规划")
//{
// styleValue = "stroke-dasharray:4 4;stroke-width:" + lineWidth + ";";
//}
//else
//{
// styleValue = "stroke-width:" + lineWidth + ";";
//}
//styleValue = styleValue + "stroke:" + ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(line.ObligateField2)));
XmlElement n1 = tlVectorControl1.SVGDocument.CreateElement("polyline") as Polyline;
n1.SetAttribute("IsLead", "1");
n1.SetAttribute("points", points);
n1.SetAttribute("layer", SvgDocument.currentLayer);
// n1.SetAttribute("style", styleValue);
tlVectorControl1.SVGDocument.RootElement.AppendChild(n1);
line.UID = Guid.NewGuid().ToString();
line.EleID = n1.GetAttribute("id");
line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
Services.BaseService.Create<LineInfo>(line);
}
break;
case "mLeadLine":
//tlVectorControl1.DrawArea.BackgroundImage = System.Drawing.Image.FromFile("f:\\back11.jpg");
//tlVectorControl1.DrawArea.BackgroundImageLayout = ImageLayout.Center;
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("电网规划层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
// sgt1.Visible = true;
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.LeadLine;
break;
case "mAreaPoly":
if (!getlayer(SvgDocument.currentLayer, "城市规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("城市规划层"))
{
MessageBox.Show("请选择城市规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.AreaPolygon;
break;
case "mFx":
SubPrint = false;
bool ck = false;
CheckedListBox.CheckedItemCollection ckcol = frmlar.checkedListBox1.CheckedItems;
for (int i = 0; i < ckcol.Count; i++) {
Layer _lar = ckcol[i] as Layer;
if (_lar.GetAttribute("layerType") == "城市规划层") {
ck = true;
}
}
if (!ck) {
MessageBox.Show("请打开城市规划层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.InterEnclosure;
MapType = "接线图";
break;
case "mGhfx":
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl1.Operation = ToolOperation.Enclosure;
// SvgDocument.currentLayer = getlayer("供电区域层", tlVectorControl1.SVGDocument.getLayerList()).ID;
MapType = "接线图";
//bar2.Visible = false;
break;
//case "mEdit":
// //bar2.Visible = true;
// SvgDocument.currentLayer = "layer97052";
// MapType = "接线图";
// break;
case "mFzzj": //放置注记
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl1.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
//LayerBox.ComboBoxEx.SelectedIndex = 2;
tlVectorControl1.Operation = ToolOperation.Select;
MapType = "规划统计";
break;
case "mDkwh": //地块维护
frmPropertyClass frmProp = new frmPropertyClass();
frmProp.ShowDialog();
break;
case "mDkfl": //地块分类
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg") {
MessageBox.Show("请选择地块。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
}
frmUsePropertySelect frmUseSel = new frmUsePropertySelect();
frmUseSel.InitData(tlVectorControl1.SVGDocument.CurrentElement.ID, tlVectorControl1.SVGDocument.SvgdataUid);
frmUseSel.ShowDialog();
break;
case "mGldt": //关联地图
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg") {
MessageBox.Show("请选择地块。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
}
frmFileSelect frmSel = new frmFileSelect();
frmSel.InitData(tlVectorControl1.SVGDocument.CurrentElement.ID, tlVectorControl1.SVGDocument.SvgdataUid, true);
frmSel.ShowDialog();
break;
case "mPriQu":
SubPrint = true;
tlVectorControl1.Operation = ToolOperation.InterEnclosurePrint;
break;
case "mReCompute":
if (MessageBox.Show("确认要重新计算全图的电量和负荷么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes) {
string scale = tlVectorControl1.SVGDocument.getViewScale();
if (scale != "") {
Recalculate(Convert.ToDecimal(scale));
} else {
Recalculate(1);
}
MessageBox.Show("重新计算完成", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mXLine":
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.XPolyLine;
break;
case "mYLine":
tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl1.Operation = ToolOperation.YPolyLine;
break;
case "mFhbz":
if (MessageBox.Show("是否生成负荷标注?", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes) {
Fhbz();
}
break;
case "mSaveGroup":
if (tlVectorControl1.SVGDocument.SelectCollection.Count > 1) {
string content = "<svg>";
SvgElementCollection col = tlVectorControl1.SVGDocument.SelectCollection;
for (int i = 0; i < col.Count; i++) {
SvgElement _e = (SvgElement)col[i];
if (_e.ID != "svg") {
content = content + _e.OuterXml;
}
}
RectangleF rect = tlVectorControl1.DrawArea.viewer.SelectedViewRectangle;
content = content + "</svg>";
frmSaveGroup fm = new frmSaveGroup();
fm.rect = rect;
fm.Content = content;
fm.ShowDialog();
} else {
MessageBox.Show("请至少选择2个图元。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
break;
case "mInsert":
frmUseGroup fg = new frmUseGroup();
if (fg.ShowDialog() == DialogResult.OK) {
UseGroup u = fg.SelectedUseGroup;
if (u != null) {
frmXY xy = new frmXY();
if (xy.ShowDialog() == DialogResult.OK) {
decimal x = xy.GetX();
decimal y = xy.GetY();
string content = u.Content;
XmlDocument doc = new XmlDocument();
doc.LoadXml(u.Content);
XmlNodeList list = doc.ChildNodes;
XmlNode _node = list[0];
XmlNodeList sonlist = _node.ChildNodes;
XmlElement ele = tlVectorControl1.SVGDocument.CreateElement("g");
ele.SetAttribute("layer", SvgDocument.currentLayer);
for (int i = 0; i < sonlist.Count; i++) {
XmlNode _sonnode = sonlist[i];
//string str = _sonnode.OuterXml;
if (_sonnode.Name == "use") {
string sid = ((XmlElement)_sonnode).GetAttribute("xlink:href");
XmlNode _snode = symbolSelector.SymbolDoc.SelectSingleNode("//*[@id='" + sid.Substring(1) + "']");
tlVectorControl1.SVGDocument.AddDefsElement((SvgElement)_snode);
}
ele.AppendChild(_sonnode);
string ss = ele.OuterXml;
}
//RectangleF r=((Group)ele).GetBounds();
string tr = "matrix(1,0,0,1,";
tr = tr + Convert.ToString(x - Convert.ToDecimal(u.X)) + ",";
tr = tr + Convert.ToString(y - Convert.ToDecimal(u.Y)) + ")";
ele.SetAttribute("transform", tr);
// transform="matrix(1,0,0,1,2558.82,-352.94)"
tlVectorControl1.SVGDocument.RootElement.AppendChild(ele);
tlVectorControl1.SVGDocument.SelectCollection.Clear();
tlVectorControl1.SVGDocument.SelectCollection.Add((SvgElement)ele);
tlVectorControl1.UnGroup();
// tlVectorControl1.Refresh();
}
}
}
break;
case "m_tp":
frmImgManager frm = new frmImgManager();
frm.StrName = "";
frm.StrRemark = "";
frm.ShowDialog();
break;
case "m_reDraw":
string svguid = tlVectorControl1.SVGDocument.SvgdataUid;
XmlNodeList nn1 = tlVectorControl1.SVGDocument.SelectNodes("svg/polyline [@IsLead='1']");
LineType lt = new LineType();
IList tpList = Services.BaseService.GetList("SelectLineTypeList", lt);
Hashtable dkHs = new Hashtable();
for (int i = 0; i < tpList.Count; i++) {
LineType _gle = (LineType)tpList[i];
dkHs.Add(_gle.TypeName, _gle.Color);
}
bool bo = tlVectorControl1.SVGDocument.Update;
tlVectorControl1.SVGDocument.Update = false;
for (int j = 0; j < nn1.Count; j++) {
XmlElement _node1 = (XmlElement)nn1.Item(j);
LineInfo line = new LineInfo();
line.SvgUID = svguid;
line.EleID = _node1.GetAttribute("id");
line = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", line);
if (line != null) {
string t = (string)dkHs[line.Voltage + "kV"];
string color1 = ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(t)));
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(_node1, "stroke", color1);
}
}
tlVectorControl1.SVGDocument.Update = bo;
break;
case "m_subColor":
string svguid1 = tlVectorControl1.SVGDocument.SvgdataUid;
XmlNodeList nn2 = tlVectorControl1.SVGDocument.SelectNodes("svg/defs/symbol");
LineType lt1 = new LineType();
IList tpList1 = Services.BaseService.GetList("SelectLineTypeList", lt1);
Hashtable dkHs1 = new Hashtable();
for (int i = 0; i < tpList1.Count; i++) {
LineType _gle = (LineType)tpList1[i];
dkHs1.Add(_gle.TypeName.ToLower(), _gle.Color);
}
bool bo1 = tlVectorControl1.SVGDocument.Update;
tlVectorControl1.SVGDocument.Update = false;
Regex regex = new Regex(@"\d{2,3}(?=kv)");
foreach (Symbol _node1 in nn2) {
string subName = _node1.GetAttribute("label").ToLower();
Match match1 = regex.Match(subName);
if (match1.Success) {
try {
string t = (string)dkHs1[match1.Value + "kv"];
//if (match1.Value == "220")
//{
// t = t;
//}
string color1 = ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(t)));
foreach (SvgElement element in _node1.GraphList) {
if (element.SvgAttributes.ContainsKey("stroke") && element.SvgAttributes["stroke"].ToString() != "#FFFFFF") {
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(element, "stroke", color1);
}
if (element.SvgAttributes.ContainsKey("fill") && element.SvgAttributes["fill"].ToString() != "#FFFFFF") {
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(element, "fill", color1);
}
if (element.SvgAttributes.ContainsKey("hatch-color") && element.SvgAttributes["hatch-color"].ToString() != "#FFFFFF") {
ItopVector.Core.Func.AttributeFunc.SetAttributeValue(element, "hatch-color", color1);
}
}
} catch { }
}
//XmlElement _node1 = (XmlElement)nn2.Item(j);
//substation line = new substation();
//line.SvgUID = svguid1;
//line.EleID = _node1.GetAttribute("id");
//line = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", line);
//if (line != null)
//{
// string t = (string)dkHs1[line.ObligateField1 + "kV"];
// string ut = _node1.GetAttribute("usestyle");
// string color1 = ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(t)));
// ItopVector.Core.Func.AttributeFunc.SetAttributeValue(_node1, "stroke", color1);
// if (ut != "true")
// {
// ItopVector.Core.Func.AttributeFunc.SetAttributeValue(_node1, "usestyle", "true");
// }
// else
// {
// ItopVector.Core.Func.AttributeFunc.SetAttributeValue(_node1, "usestyle", "false");
// }
//}
}
tlVectorControl1.SVGDocument.Update = bo1;
break;
#endregion
#region 图层操作
case "layerImport":
tlVectorControl1.Operation = ToolOperation.FreePath;
layerImport();
break;
case "layerExport":
layerExport();
break;
case "m_kbsText":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK) {
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows) {
if (r1[0].ToString() != "") {
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[12]);
WD = Convert.ToDecimal(r1[13]);
PointF fnt = mapview.ParseToPoint(JD, WD);
XmlElement t1 = tlVectorControl1.SVGDocument.CreateElement("text") as Text;
t1.SetAttribute("x", Convert.ToString(fnt.X / (float)tlVectorControl1.ScaleRatio + 8));
t1.SetAttribute("y", Convert.ToString(fnt.Y / (float)tlVectorControl1.ScaleRatio));
t1.SetAttribute("layer", SvgDocument.currentLayer);
t1.SetAttribute("style", "fill:#FFFFFF;fill-opacity:1;stroke:#000000;stroke-opacity:1;");
t1.SetAttribute("font-famliy", "宋体");
t1.SetAttribute("font-size", "6");
t1.InnerText = r1[2].ToString();
tlVectorControl1.SVGDocument.RootElement.AppendChild(t1);
}
}
tlVectorControl1.Refresh();
}
break;
case "m_fText":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK) {
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows) {
if (r1[0].ToString() != "") {
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[9]);
WD = Convert.ToDecimal(r1[10]);
PointF fnt = mapview.ParseToPoint(JD, WD);
XmlElement t1 = tlVectorControl1.SVGDocument.CreateElement("text") as Text;
t1.SetAttribute("x", Convert.ToString(fnt.X / (float)tlVectorControl1.ScaleRatio + 8));
t1.SetAttribute("y", Convert.ToString(fnt.Y / (float)tlVectorControl1.ScaleRatio));
t1.SetAttribute("layer", SvgDocument.currentLayer);
t1.SetAttribute("style", "fill:#FFFFFF;fill-opacity:1;stroke:#000000;stroke-opacity:1;");
t1.SetAttribute("font-famliy", "宋体");
t1.SetAttribute("font-size", "6");
t1.InnerText = r1[1].ToString();
tlVectorControl1.SVGDocument.RootElement.AppendChild(t1);
}
}
tlVectorControl1.Refresh();
}
break;
case "m_inkbs":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK) {
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows) {
if (r1[0].ToString() != "") {
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[12]);
WD = Convert.ToDecimal(r1[13]);
//IntXY xy = mapview.getXY(JD, WD);
PointF fnt = mapview.ParseToPoint(JD, WD);
if (r1[7].ToString() == "运行") {
ele = tlVectorControl1.CreateBySymbolID("kbs-111", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
} else {
ele = tlVectorControl1.CreateBySymbolID("kbs-112", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
ele = tlVectorControl1.AddShape(ele, Point.Empty);
ele.SetAttribute("layer", tlVectorControl1.SVGDocument.CurrentLayer.ID);
//points = points + (-xy.X / (decimal)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (decimal)tlVectorControl1.ScaleRatio) + ",";
PSP_Gra_item item = new PSP_Gra_item();
item.UID = Guid.NewGuid().ToString();
item.EleKeyID = r1[1].ToString();
item.EleName = r1[2].ToString();
item.EleID = ele.ID;
item.LayerID = tlVectorControl1.SVGDocument.CurrentLayer.ID;
item.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
item.col1 = r1[7].ToString();
item.col2 = r1[3].ToString();
item.col3 = r1[4].ToString();
item.col4 = r1[5].ToString();
item.col5 = r1[6].ToString();
item.col6 = r1[8].ToString();
item.col7 = r1[9].ToString();
item.col8 = "kbs";
Services.BaseService.Create<PSP_Gra_item>(item);
}
}
}
break;
case "m_infjx":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK) {
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows) {
if (r1[0].ToString() != "") {
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[9]);
WD = Convert.ToDecimal(r1[10]);
//IntXY xy = mapview.getXY(JD, WD);
PointF fnt = mapview.ParseToPoint(JD, WD);
if (r1[4].ToString() == "运行") {
ele = tlVectorControl1.CreateBySymbolID("fjx-111", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
} else {
ele = tlVectorControl1.CreateBySymbolID("fjx-112", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
ele = tlVectorControl1.AddShape(ele, Point.Empty);
ele.SetAttribute("layer", tlVectorControl1.SVGDocument.CurrentLayer.ID);
//points = points + (-xy.X / (decimal)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (decimal)tlVectorControl1.ScaleRatio) + ",";
PSP_Gra_item item = new PSP_Gra_item();
item.UID = Guid.NewGuid().ToString();
item.EleKeyID = r1[2].ToString();
item.EleName = r1[1].ToString();
item.EleID = ele.ID;
item.LayerID = tlVectorControl1.SVGDocument.CurrentLayer.ID;
item.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
item.col1 = r1[4].ToString();
item.col2 = r1[3].ToString();
item.col3 = r1[5].ToString();
item.col4 = r1[6].ToString();
//item.col5 = r1[6].ToString();
//item.col6 = r1[8].ToString();
//item.col7 = r1[9].ToString();
item.col8 = "fjx";
Services.BaseService.Create<PSP_Gra_item>(item);
}
}
}
break;
case "m_inbyq":
openFileDialog1 = new OpenFileDialog();
openFileDialog1.Filter = "Excel文件(*.xls)|*.xls";
if (openFileDialog1.ShowDialog() == DialogResult.OK) {
DataSet ds = ImportExcel(openFileDialog1.FileName);
DataTable dt1 = ds.Tables[0];
foreach (DataRow r1 in dt1.Rows) {
if (r1[0].ToString() != "") {
SvgElement ele = null;
decimal JD = 0;
decimal WD = 0;
JD = Convert.ToDecimal(r1[9]);
WD = Convert.ToDecimal(r1[10]);
//IntXY xy = mapview.getXY(JD, WD);
PointF fnt = mapview.ParseToPoint(JD, WD);
if (r1[4].ToString() == "运行") {
ele = tlVectorControl1.CreateBySymbolID("byq-111", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
} else {
ele = tlVectorControl1.CreateBySymbolID("byq-112", new PointF((float)(fnt.X / (float)tlVectorControl1.ScaleRatio), (float)(fnt.Y / (float)tlVectorControl1.ScaleRatio)));
}
ele = tlVectorControl1.AddShape(ele, Point.Empty);
ele.SetAttribute("layer", tlVectorControl1.SVGDocument.CurrentLayer.ID);
//points = points + (-xy.X / (decimal)tlVectorControl1.ScaleRatio) + " " + (-xy.Y / (decimal)tlVectorControl1.ScaleRatio) + ",";
PSP_Gra_item item = new PSP_Gra_item();
item.UID = Guid.NewGuid().ToString();
item.EleKeyID = r1[2].ToString();
item.EleName = r1[1].ToString();
item.EleID = ele.ID;
item.LayerID = tlVectorControl1.SVGDocument.CurrentLayer.ID;
item.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
item.col1 = r1[4].ToString();
item.col2 = r1[3].ToString();
item.col3 = r1[5].ToString();
item.col4 = r1[6].ToString();
item.col8 = "byq";
Services.BaseService.Create<PSP_Gra_item>(item);
}
}
}
break;
#endregion
#region 未来联动
case "m_bxz":
//tlVectorControl1.GoLocation();
Gh_BXZ();
break;
case "m_jp":
tlVectorControl1.ClipScreen(true);
break;
case "m_ld":
if (SvgDocument.currentLayer == "") {
MessageBox.Show("请选择图层", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (MessageBox.Show("确认要以当前选中年份为准调整以后年度的变电站及线路位置么？", "请确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes) {
Linkage();
}
break;
case "m_fz":
if (tlVectorControl1.SVGDocument.CurrentElement == null || tlVectorControl1.SVGDocument.CurrentElement.ID == "svg") {
MessageBox.Show("请选择图元", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
CopyEle();
break;
case "m_cx":
xltProcessor.GoLocation(tlVectorControl1.SVGDocument.SvgdataUid, frmlar.getSelectedLayer());
//XmlNodeList n1111 = tlVectorControl1.SVGDocument.SelectNodes("svg/polygon [@IsArea='1']");
//string a = "1";
break;
#endregion
#region 线路优选
case "bt_edit":
break;
case "bt_start":
if (linekey == "") {
MessageBox.Show("请选择线路所属的方案。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_start";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_end":
if (sel_start_point == "") {
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_end";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_must":
if (sel_start_point == "") {
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_must";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_point":
if (sel_start_point == "") {
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
sel_sym = "bt_point";
tlVectorControl1.Operation = ToolOperation.Symbol;
break;
case "bt_make":
if (sel_start_point == "") {
MessageBox.Show("请选择线路起点。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
frmInputDialog frm_input = new frmInputDialog();
if (frm_input.ShowDialog() == DialogResult.OK) {
SortedList orderlist = new SortedList();
XmlNodeList XLlist = tlVectorControl1.SVGDocument.SelectNodes("//*[@start_point=\"" + sel_start_point + "\"]");
try {
for (int i = 0; i < XLlist.Count; i++) {
XmlElement node = (XmlElement)XLlist[i];
orderlist.Add(Convert.ToInt32(node.GetAttribute("order")), node);
}
} catch (Exception ex1) {
MessageBox.Show("存在相同的节点顺序号，请修改。\n\r" + ex1.Message, "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
PointF[] _points = new PointF[XLlist.Count];
for (int i = 0; i < orderlist.Count; i++) {
PointF[] f1 = new PointF[1] { new PointF(((Use)orderlist.GetByIndex(i)).X + 6, ((Use)orderlist.GetByIndex(i)).Y + 6) };
((Use)orderlist.GetByIndex(i)).Transform.Matrix.TransformPoints(f1);
_points[i] = f1[0];
}
string str_points = "";
for (int i = 0; i < _points.Length; i++) {
str_points = str_points + _points[i].X + " " + _points[i].Y + ",";
}
if (str_points.Length > 1) {
str_points = str_points.Substring(0, str_points.Length - 1);
}
XmlElement _templine = tlVectorControl1.SVGDocument.CreateElement("polyline") as Polyline;
_templine.SetAttribute("IsLead", "1");
_templine.SetAttribute("points", str_points);
_templine.SetAttribute("layer", SvgDocument.currentLayer);
Random dom = new Random();
int int_d = dom.Next(99999);
string styleValue = "stroke:" + ColorTranslator.ToHtml(Color.FromArgb(int_d));
_templine.SetAttribute("style", styleValue);
XmlNode tt_node = tlVectorControl1.SVGDocument.RootElement.AppendChild(_templine);
LineInfo gh_line = new LineInfo();
gh_line.UID = Guid.NewGuid().ToString();
gh_line.EleID = _templine.GetAttribute("id");
gh_line.SvgUID = tlVectorControl1.SVGDocument.SvgdataUid;
Services.BaseService.Create<LineInfo>(gh_line);
tlVectorControl1.Refresh();
if (MessageBox.Show("是否删除该线路的参考点？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes) {
tlVectorControl1.SVGDocument.SelectCollection.Clear();
for (int i = 0; i < XLlist.Count; i++) {
if (((SvgElement)XLlist[i]).GetAttribute("xlink:href").Contains("XL_GT_4") || ((SvgElement)XLlist[i]).GetAttribute("xlink:href").Contains("XL_GT_3")) {
tlVectorControl1.SVGDocument.SelectCollection.Add((SvgElement)XLlist[i]);
}
}
tlVectorControl1.Delete();
}
string str = "";
LineList1 line1 = new LineList1();
line1.UID = Guid.NewGuid().ToString();
//line1.LineEleID = tlVectorControl1.SVGDocument.CurrentElement.ID;
line1.PointNum = ((Polyline)(tt_node)).Points.Length - 2;
line1.Coefficient = (decimal)(1.02);
line1.Length = TLMath.getPolylineLength(((Polyline)(tt_node)), Convert.ToDecimal(tlVectorControl1.ScaleRatio));
line1.Length2 = TLMath.getPolylineLength(((Polyline)(tt_node)), Convert.ToDecimal(tlVectorControl1.ScaleRatio)) * Convert.ToDecimal(1.02);
PointF[] pnt = ((Polyline)(tt_node)).Points;
if (pnt.Length < 3) return;
for (int i = 0; i < pnt.Length; i++) {
double ang = TLMath.getLineAngle(pnt[i], pnt[i + 1], pnt[i + 2]);
if (ang * 57.3 > 60) {
MessageBox.Show("线路转角不能大于60度。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
tlVectorControl1.Delete();
return;
}
str = str + "第" + (i + 1) + "转角：" + Convert.ToDouble(ang * 57.3).ToString("##.##") + "度。\r\n";
if (i == pnt.Length - 3) {
break;
}
}
line1.TurnAngle = str;
line1.col1 = linekey;
line1.LineName = frm_input.InputStr;
line1.LineEleID = ((SvgElement)tt_node).ID;
Services.BaseService.Create<LineList1>(line1);
sel_start_point = "";
tlVectorControl1.Operation = ToolOperation.Select;
}
break;
case "Niula":
OpenProject op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK) {
if (op.FileSUID != null) {
ElectricLoadCal elc = new ElectricLoadCal();
elc.LFC(op.FileSUID, 1, 100);
ShowResult(0, op.FileSUID,op.FileName);
}
}
break;
case "pq":
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK) {
if (op.FileSUID != null) {
ElectricLoadCal elcPQ = new ElectricLoadCal();
elcPQ.LFC(op.FileSUID, 2, 100);
ShowResult(1, op.FileSUID,op.FileName);
}
}
break;
case "GausSeidel":
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK) {
if (op.FileSUID != null) {
ElectricLoadCal elcGS = new ElectricLoadCal();
elcGS.LFC(op.FileSUID, 3, 100);
ShowResult(2, op.FileSUID,op.FileName);
}
}
break;
case "N_RZYz":
op = new OpenProject();
op.ProjectID = Itop.Client.MIS.ProgUID;
op.Initdata(false);
if (op.ShowDialog() == DialogResult.OK) {
if (op.FileSUID != null) {
ElectricLoadCal elcN_RZYz = new ElectricLoadCal();
elcN_RZYz.LFC(op.FileSUID, 4, 100);
ShowResult(3, op.FileSUID,op.FileName);
}
}
break;
#endregion
}
}
}
private void dotNetBarManager1_ItemClick(object sender, EventArgs e)
{
DevComponents.DotNetBar.ButtonItem btItem = sender as DevComponents.DotNetBar.ButtonItem;
//Layer layer1 = (Layer)LayerBox.ComboBoxEx.SelectedItem;
if (btItem != null) {
//if (btItem.Name == "mRoam") {
// frmlar.Hide();
//} else {
// frmlar.Show();
//}
switch (btItem.Name) {
#region 文件操作
case "mNew":
tlVectorControl2.NewFile();
break;
case "mOpen":
break;
case "mImport":
ExportImage();
//ImportDxf();
break;
case "ImportDxf":
ImportDxf();
break;
case "btExSymbol":
tlVectorControl2.ExportSymbol();
break;
case "mSave":
Save();
break;
case "mExit":
//XmlElement s= (XmlElement)tlVectorControl1.SVGDocument.SelectCollection[0];
//Polygon p = (Polygon)s;
//tlVectorControl1.SymbolSelector = this.symbolSelector;
//tlVectorControl1.ExportSymbol();
//tlVectorControl1.CurrentOperation = ToolOperation.WindowZoom;
//frmLayerList ff = new frmLayerList();
//ff.InitData(tlVectorControl1.SVGDocument.getLayerList());
//ff.Show();
//string aa = tlVectorControl1.SVGDocument.SvgdataUid;
////tlVectorControl1.NewFile();
//tlVectorControl1.OpenFile("C:\\a1.svg");
//tlVectorControl1.SVGDocument.SvgdataUid = aa;
this.Close();
//frmAddLine ff = new frmAddLine();
//ff.Show();
//tlVectorControl1.ExportSymbol();
//XmlNodeList list1 = tlVectorControl1.SVGDocument.SelectNodes("//*[@href=\"#实心杆塔0\"]");
//XmlNodeList list2 = tlVectorControl1.SVGDocument.SelectNodes("//*[@href=\"#实心杆塔1\"]");
//for (int i = 0; i < list1.Count; i++)
//{
// tlVectorControl1.SVGDocument.RootElement.RemoveChild(list1[i]);
//}
//for (int j = 0; j < list2.Count; j++)
//{
// tlVectorControl1.SVGDocument.RootElement.RemoveChild(list2[j]);
//}
//InitTK();
//XmlElement a = tlVectorControl1.SVGDocument.RootElement;
//a.SetAttribute("height","3000");
//tlVectorControl1.Refresh();
//XmlElement b = tlVectorControl1.SVGDocument.GetElementById("circle49171");
//string a = tlVectorControl1.SVGDocument.OuterXml;
//Hashtable hs = new Hashtable();
//XmlNodeList list = tlVectorControl1.SVGDocument.GetElementsByTagName("symbol");
//for (int i = 0; i < list.Count; i++)
//{
// XmlNode node = list[i];
// hs.Add(i, node);
// //((XmlElement)node).SetAttribute("id", "xxx" + i.ToString());
//}
break;
case "bt1":
InitTK();
break;
case "bt2":
break;
case "mPriSet":
tlVectorControl2.PaperSetup();
break;
case "mPrint":
tlVectorControl2.Print();
break;
case "mView":
//frmSvgView fView = new frmSvgView();
//fView.Open(tlVectorControl1.SVGDocument.SvgdataUid);
//fView.Show();
break;
case "mViewScale":
if (img != null) {
frmtempViewScale fscale1 = new frmtempViewScale();
fscale1.ShowDialog();
} else {
frmViewScale fScale = new frmViewScale();
string viewScale = tlVectorControl2.SVGDocument.getViewScale();
if (viewScale != "") {
fScale.InitData(viewScale);
}
if (fScale.ShowDialog() == DialogResult.OK) {
//viewScale = fScale.ViewScale;
string _viewScale = fScale.ViewScale;
tlVectorControl2.SVGDocument.setViewScale(_viewScale);
if (viewScale == "") {
viewScale = "1";
}
Recalculate(Convert.ToDecimal(_viewScale) / Convert.ToDecimal(viewScale));
}
}
break;
case "mRzb":
frmRatio fRat = new frmRatio();
string viewRat = tlVectorControl2.SVGDocument.getRZBRatio();
if (viewRat != "") {
fRat.InitData(viewRat);
}
if (fRat.ShowDialog() == DialogResult.OK) {
viewRat = fRat.ViewScale;
tlVectorControl2.SVGDocument.setRZBRatio(viewRat);
}
break;
case "mEdit":
if (MapType == "所内接线图") {
Save();
svg.SUID = ParentUID;
IList svglist = Services.BaseService.GetList("SelectSVGFILEByKey", svg);
svg = (SVGFILE)svglist[0];
sdoc = null;
sdoc = new SvgDocument();
sdoc.LoadXml(svg.SVGDATA);
tlVectorControl2.SVGDocument = sdoc;
tlVectorControl2.SVGDocument.SvgdataUid = svg.SUID;
MapType = "接线图";
CtrlSvgView.MapType = "接线图";
LoadShape("symbol_3.xml");
Init(progtype);
//ButtonEnb(true);
//frmlar.SymbolDoc = tlVectorControl2.SVGDocument;
//frmlar.Progtype = progtype;
//frmlar.InitData();
bk1.Enabled = true;
LoadImage = true;
tlVectorControl2.Refresh();
}
//tlVectorControl1.ContextMenuStrip = contextMenuStrip1;
MapType = "接线图";
break;
case "mAbout":
frmAbout frma = new frmAbout();
frma.ShowDialog();
break;
#endregion
#region 基础图元
case "mDecreaseView":
tlVectorControl2.Operation = ToolOperation.DecreaseView;
break;
case "mIncreaseView":
tlVectorControl2.Operation = ToolOperation.IncreaseView;
break;
case "mRoam":
tlVectorControl2.Operation = ToolOperation.Roam;
break;
case "mSelect":
case "mSel":
//tlVectorControl1.Operation = ToolOperation.Select;
tlVectorControl2.Operation = ToolOperation.FreeTransform;
break;
case "mFreeTransform":
tlVectorControl2.Operation = ToolOperation.FreeTransform;
break;
case "mFreeLines"://锁套
tlVectorControl2.Operation = ToolOperation.FreeLines;
break;
case "mFreePath":
tlVectorControl2.Operation = ToolOperation.FreePath;
break;
case "mShapeTransform":
tlVectorControl2.Operation = ToolOperation.ShapeTransform;
break;
case "mShapeTransform1": //截断
tlVectorControl2.Operation = ToolOperation.Custom11;
break;
case "mShapeTransform2": //延长（e）
tlVectorControl2.Operation = ToolOperation.Custom12;
break;
case "mShapeTransform3": //延长（b）
tlVectorControl2.Operation = ToolOperation.Custom13;
break;
case "mShapeTransform4": //增加
tlVectorControl2.Operation = ToolOperation.Custom15;
break;
case "mShapeTransform5": //删除
tlVectorControl2.Operation = ToolOperation.Custom14;
break;
case "mAngleRectangle":
tlVectorControl2.Operation = ToolOperation.AngleRectangle;
break;
case "mEllipse":
tlVectorControl2.Operation = ToolOperation.Ellipse;
break;
case "mLine":
tlVectorControl2.Operation = ToolOperation.Line;
break;
case "mPolyline":
tlVectorControl2.Operation = ToolOperation.PolyLine;
break;
case "mPolygon":
tlVectorControl2.Operation = ToolOperation.Polygon;
break;
case "mImage":
tlVectorControl2.Operation = ToolOperation.Image;
break;
case "mText":
tlVectorControl2.Operation = ToolOperation.Text;
break;
case "mBezier":
tlVectorControl2.Operation = ToolOperation.Bezier;
break;
case "mEnclosure":
tlVectorControl2.Operation = ToolOperation.Enclosure;
break;
case "mGroup":
tlVectorControl2.Group();
break;
case "mUnGroup":
tlVectorControl2.UnGroup();
break;
case "mlinelx":
tlVectorControl2.Operation = ToolOperation.ConnectLine_Line;
break;
case "mzxlx":
tlVectorControl2.Operation = ToolOperation.ConnectLine_Rightangle;
break;
case "mqxlx":
tlVectorControl2.Operation = ToolOperation.ConnectLine_Spline;
break;
case "mqzlx":
tlVectorControl2.Operation = ToolOperation.ConnectLine_Polyline;
break;
case "mCJ":
tlVectorControl2.Operation = ToolOperation.PolyLine;
csOperation = CustomOperation.OP_MeasureDistance;
break;
#endregion
#region 视图
case "mOption":
tlVectorControl2.SetOption();
break;
case "mLayer":
LayerManagerShow();
//tlVectorControl1.LayerManager();
break;
case "mAirscape":
frmAirscape fAir = new frmAirscape();
fAir.InitData(tlVectorControl2);
fAir.Owner = this;
fAir.ShowInTaskbar = false;
fAir.Top = Screen.PrimaryScreen.WorkingArea.Height - 250;
fAir.Left = Screen.PrimaryScreen.WorkingArea.Width - 300;
fAir.Show();
break;
case "btTL":
frmGlebeTypeList fgle = new frmGlebeTypeList();
fgle.Show();
break;
#endregion
#region 查看
case "mDklb":
frmLayerList lay = new frmLayerList();
lay.InitData(tlVectorControl2.SVGDocument.getLayerList(), "1");
if (lay.ShowDialog() == DialogResult.OK) {
frmglebePropertyList flist1 = new frmglebePropertyList();
flist1.InitDataSub(tlVectorControl2.SVGDocument.SvgdataUid, lay.str_sid);
flist1.Show();
}
break;
case "mGhlb":
frmLayerList lay2 = new frmLayerList();
lay2.InitData(tlVectorControl2.SVGDocument.getLayerList(), "2");
if (lay2.ShowDialog() == DialogResult.OK) {
frmglebePropertyList flist2 = new frmglebePropertyList();
flist2.InitData(tlVectorControl2.SVGDocument.SvgdataUid, lay2.str_sid);
flist2.Show();
}
break;
case "mLineList":
frmLayerList lay3 = new frmLayerList();
lay3.InitData(tlVectorControl2.SVGDocument.getLayerList(), "2");
if (lay3.ShowDialog() == DialogResult.OK) {
frmLinePropertyList flist3 = new frmLinePropertyList();
flist3.InitData(tlVectorControl2.SVGDocument.SvgdataUid, lay3.str_sid);
flist3.Show();
}
break;
case "mDlph":
frmLayerList lay4 = new frmLayerList();
lay4.InitData(tlVectorControl2.SVGDocument.getLayerList(), "3");
if (lay4.ShowDialog() == DialogResult.OK) {
frmSubstationPropertyList fSub = new frmSubstationPropertyList();
fSub.InitData(tlVectorControl2.SVGDocument.SvgdataUid, lay4.str_sid);
fSub.Show();
}
break;
#endregion
#region 布局，对齐，顺序
case "mRotate":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl2.FlipX();
} else {
tlVectorControl2.FlipX();
}
break;
case "mToH":
tlVectorControl2.FlipX();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToV":
tlVectorControl2.FlipY();
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToLeft":
tlVectorControl2.RotateSelection(-90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mToRight":
tlVectorControl2.RotateSelection(90f);
this.rotateButton.Tag = btItem;
this.rotateButton.ImageIndex = btItem.ImageIndex;
break;
case "mAlign":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl2.Align(AlignType.Left);
} else {
tlVectorControl2.Align(AlignType.Left);
}
tlVectorControl2.Refresh();
break;
case "mAlignLeft":
tlVectorControl2.Align(AlignType.Left);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl2.Refresh();
break;
case "mAlignRight":
tlVectorControl2.Align(AlignType.Right);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl2.Refresh();
break;
case "mAlignTop":
tlVectorControl2.Align(AlignType.Top);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl2.Refresh();
break;
case "mAlignBottom":
tlVectorControl2.Align(AlignType.Bottom);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl2.Refresh();
break;
case "mAlignHorizontalCenter":
tlVectorControl2.Align(AlignType.HorizontalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl2.Refresh();
break;
case "mAlignVerticalCenter":
tlVectorControl2.Align(AlignType.VerticalCenter);
this.alignButton.ImageIndex = btItem.ImageIndex;
this.alignButton.Tag = btItem;
tlVectorControl2.Refresh();
break;
case "mOrder":
if (btItem.Tag is ButtonItem) {
btItem = btItem.Tag as ButtonItem;
tlVectorControl2.ChangeLevel(LevelType.Top);
} else {
tlVectorControl2.ChangeLevel(LevelType.Top);
}
break;
case "mGoTop":
tlVectorControl2.ChangeLevel(LevelType.Top);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoUp":
tlVectorControl2.ChangeLevel(LevelType.Up);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoDown":
tlVectorControl2.ChangeLevel(LevelType.Down);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
case "mGoBottom":
tlVectorControl2.ChangeLevel(LevelType.Bottom);
this.orderButton.Tag = btItem;
this.orderButton.ImageIndex = btItem.ImageIndex;
break;
#endregion
#region 图元操作
case "mCopy":
tlVectorControl2.Copy();
break;
case "mCut":
tlVectorControl2.Cut();
break;
case "mPaste":
tlVectorControl2.Paste();
break;
case "mDelete":
if (tlVectorControl2.SVGDocument.CurrentElement != null && tlVectorControl2.SVGDocument.CurrentElement.ID != "svg") {
frmMessageBox msg = new frmMessageBox();
if (msg.ShowDialog() == DialogResult.OK) {
if (msg.ck) {
// if(MessageBox.Show("确认删除么？","提示",MessageBoxButtons.YesNo,MessageBoxIcon.Information)==DialogResult.Yes){
for (int i = 0; i < tlVectorControl2.SVGDocument.SelectCollection.Count; i++) {
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polygon") {
glebeProperty gle = new glebeProperty();
gle.SvgUID = tlVectorControl2.SVGDocument.SvgdataUid;
gle.EleID = tlVectorControl2.SVGDocument.SelectCollection[i].ID;
Services.BaseService.Update("DeleteglebePropertyByEleID", gle);
}
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polyline" || tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Line") {
LineInfo _line = new LineInfo();
_line.SvgUID = tlVectorControl2.SVGDocument.SvgdataUid;
_line.EleID = tlVectorControl2.SVGDocument.SelectCollection[i].ID;
LineInfo temp = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", _line);
if (temp != null) {
Services.BaseService.Update("DeleteLinePropertyByEleID", _line);
Services.BaseService.Update("DeleteLine_InfoByCode", temp.UID);
}
}
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Use") {
string str_name = ((XmlElement)(tlVectorControl2.SVGDocument.SelectCollection[i])).GetAttribute("xlink:href");
if (str_name.Contains("Substation")) {
substation _sub = new substation();
_sub.SvgUID = tlVectorControl2.SVGDocument.SvgdataUid;
_sub.EleID = tlVectorControl2.SVGDocument.SelectCollection[i].ID;
substation temp = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", _sub);
if (temp != null) {
Services.BaseService.Update("DeletesubstationByEleID", _sub);
Services.BaseService.Update("DeleteSubstation_InfoByCode", temp.UID);
}
}
}
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.ConnectLine") {
ConnectLine cline = (ConnectLine)tlVectorControl2.SVGDocument.SelectCollection[i];
if (cline.StartGraph != null) {
SvgElement ele = (SvgElement)cline.StartGraph;
if (!ele.GetAttribute("xlink:href").Contains("Substation")) {
tlVectorControl2.SVGDocument.SelectCollection.Add(cline.StartGraph);
}
}
if (cline.EndGraph != null) {
tlVectorControl2.SVGDocument.SelectCollection.Add(cline.EndGraph);
}
}
}
} else {
for (int i = 0; i < tlVectorControl2.SVGDocument.SelectCollection.Count; i++) {
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Polyline" || tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Line") {
LineInfo _line = new LineInfo();
_line.SvgUID = tlVectorControl2.SVGDocument.SvgdataUid;
_line.EleID = tlVectorControl2.SVGDocument.SelectCollection[i].ID;
LineInfo linetemp = (LineInfo)Services.BaseService.GetObject("SelectLineInfoByEleID", _line);
if (linetemp != null) {
PowerProTypes temp = (PowerProTypes)Services.BaseService.GetObject("SelectPowerProTypesByCode", linetemp.UID);
if (temp != null) {
linetemp.EleID = "";
Services.BaseService.Update<LineInfo>(linetemp);
} else {
Services.BaseService.Update("DeleteLineInfo", linetemp);
}
}
}
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.Use") {
string str_name = ((XmlElement)(tlVectorControl2.SVGDocument.SelectCollection[i])).GetAttribute("xlink:href");
if (str_name.Contains("Substation")) {
substation _sub = new substation();
_sub.SvgUID = tlVectorControl2.SVGDocument.SvgdataUid;
_sub.EleID = tlVectorControl2.SVGDocument.SelectCollection[i].ID;
substation subtemp = (substation)Services.BaseService.GetObject("SelectsubstationByEleID", _sub);
if (subtemp != null) {
PowerProTypes temp = (PowerProTypes)Services.BaseService.GetObject("SelectPowerProTypesByCode", subtemp.UID);
if (temp != null) {
subtemp.EleID = "";
Services.BaseService.Update<substation>(subtemp);
} else {
Services.BaseService.Update("Deletesubstation", subtemp);
}
}
}
}
if (tlVectorControl2.SVGDocument.SelectCollection[i].GetType().ToString() == "ItopVector.Core.Figure.ConnectLine") {
ConnectLine cline = (ConnectLine)tlVectorControl2.SVGDocument.SelectCollection[i];
if (cline.StartGraph != null) {
SvgElement ele = (SvgElement)cline.StartGraph;
if (!ele.GetAttribute("xlink:href").Contains("Substation")) {
tlVectorControl2.SVGDocument.SelectCollection.Add(cline.StartGraph);
}
}
if (cline.EndGraph != null) {
tlVectorControl2.SVGDocument.SelectCollection.Add(cline.EndGraph);
}
}
}
}
tlVectorControl2.Delete();
}
}
//tlVectorControl1.Operation = ToolOperation.Select;
break;
case "mUodo":
tlVectorControl2.Undo();
break;
case "mRedo":
tlVectorControl2.Redo();
break;
#endregion
#region 业务操作
case "mSubPrint":
//tlVectorControl1.CurrentOperation = ToolOperation.InterEnclosure;
//SubPrint = true;
//frmSubPrint s = new frmSubPrint();
////s.Open(tlVectorControl1.SVGDocument);
//s.Show();
Hashtable HashTable1 = new Hashtable();
HashTable1.Add("SUID", tlVectorControl2.SVGDocument.SvgdataUid);
Services.BaseService.Update("UpdateGlebePropertyAll", HashTable1);
break;
case "mJQLeadLine":
tlVectorControl2.Operation = ToolOperation.Select;
frmAddLine aLine = new frmAddLine();
if (aLine.ShowDialog() == DialogResult.OK) {
string points = "";
ArrayList list = aLine.list;
LineInfo line = aLine.line;
string lineWidth = aLine.LineWidth;
//ICollection Ilist = list.Values;
//IEnumerator IEnum=Ilist.GetEnumerator();
for (int n = 0; n < list.Count; n++) {
//while (IEnum.MoveNext())
//{
string[] str = ((string)list[n]).Split(',');
//string[] str = ((string)IEnum.Current).Split(',');
string[] JWD1 = str[0].Split(' ');
Double J1 = Convert.ToDouble(JWD1[0]);
Double W1 = Convert.ToDouble(JWD1[1]);
Double D1 = Convert.ToDouble(JWD1[2]);
string[] JWD2 = str[1].Split(' ');
Double J2 = Convert.ToDouble(JWD2[0]);
Double W2 = Convert.ToDouble(JWD2[1]);
Double D2 = Convert.ToDouble(JWD2[2]);
Double JD = J1 + W1 / 60 + D1 / 3600;
Double WD = J2 + W2 / 60 + D2 / 3600;
IntXY xy = mapview.getXY(JD, WD);
points = points + (-xy.X / (Double)tlVectorControl2.ScaleRatio) + " " + (-xy.Y / (Double)tlVectorControl2.ScaleRatio) + ",";
//}
}
if (points.Length > 1) {
points = points.Substring(0, points.Length - 1);
}
//string styleValue = "";
//if (line.ObligateField1 == "规划")
//{
// styleValue = "stroke-dasharray:4 4;stroke-width:" + lineWidth + ";";
//}
//else
//{
// styleValue = "stroke-width:" + lineWidth + ";";
//}
//styleValue = styleValue + "stroke:" + ColorTranslator.ToHtml(Color.FromArgb(Convert.ToInt32(line.ObligateField2)));
XmlElement n1 = tlVectorControl2.SVGDocument.CreateElement("polyline") as Polyline;
n1.SetAttribute("IsLead", "1");
n1.SetAttribute("points", points);
n1.SetAttribute("layer", SvgDocument.currentLayer);
// n1.SetAttribute("style", styleValue);
tlVectorControl2.SVGDocument.RootElement.AppendChild(n1);
line.UID = Guid.NewGuid().ToString();
line.EleID = n1.GetAttribute("id");
line.SvgUID = tlVectorControl2.SVGDocument.SvgdataUid;
Services.BaseService.Create<LineInfo>(line);
}
break;
case "mLeadLine":
//tlVectorControl1.DrawArea.BackgroundImage = System.Drawing.Image.FromFile("f:\\back11.jpg");
//tlVectorControl1.DrawArea.BackgroundImageLayout = ImageLayout.Center;
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl2.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("电网规划层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
// sgt1.Visible = true;
tlVectorControl2.Operation = ToolOperation.Select;
tlVectorControl2.Operation = ToolOperation.LeadLine;
break;
case "mAreaPoly":
if (!getlayer(SvgDocument.currentLayer, "城市规划层", tlVectorControl2.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("城市规划层"))
{
MessageBox.Show("请选择城市规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl2.Operation = ToolOperation.Select;
tlVectorControl2.Operation = ToolOperation.AreaPolygon;
break;
case "mFx":
SubPrint = false;
bool ck = false;
//CheckedListBox.CheckedItemCollection ckcol = frmlar.checkedListBox1.CheckedItems;
//for (int i = 0; i < ckcol.Count; i++) {
// Layer _lar = ckcol[i] as Layer;
// if (_lar.GetAttribute("layerType") == "城市规划层") {
// ck = true;
// }
//}
//if (!ck) {
// MessageBox.Show("请打开城市规划层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
// return;
//}
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl2.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl2.Operation = ToolOperation.Select;
tlVectorControl2.Operation = ToolOperation.InterEnclosure;
MapType = "接线图";
break;
case "mGhfx":
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl2.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
tlVectorControl2.Operation = ToolOperation.Enclosure;
// SvgDocument.currentLayer = getlayer("供电区域层", tlVectorControl1.SVGDocument.getLayerList()).ID;
MapType = "接线图";
//bar2.Visible = false;
break;
//case "mEdit":
// //bar2.Visible = true;
// SvgDocument.currentLayer = "layer97052";
// MapType = "接线图";
// break;
case "mFzzj": //放置注记
if (!getlayer(SvgDocument.currentLayer, "电网规划层", tlVectorControl2.SVGDocument.getLayerList()))
//if (!layer1.Label.Contains("供电区域层"))
{
MessageBox.Show("请选择电网规划层作为当前图层。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
//LayerBox.ComboBoxEx.SelectedIndex = 2;
tlVectorControl2.Operation = ToolOperation.Select;
MapType = "规划统计";
break;
case "mDkwh": //地块维护
frmPropertyClass frmProp = new frmPropertyClass();
frmProp.ShowDialog();
break;
case "mDkfl": //地块分类
if (tlVectorControl2.SVGDocument.CurrentElement == null || tlVectorControl2.SVGDocument.CurrentElement.ID == "svg") {
MessageBox.Show("请选择地块。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
}
frmUsePropertySelect frmUseSel = new frmUsePropertySelect();
frmUseSel.InitData(tlVectorControl2.SVGDocument.CurrentElement.ID, tlVectorControl2.SVGDocument.SvgdataUid);
frmUseSel.ShowDialog();
break;
case "mGldt": //关联地图
if (tlVectorControl2.SVGDocument.CurrentElement == null || tlVectorControl2.SVGDocument.CurrentElement.ID == "svg") {
MessageBox.Show("请选择地块。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
break;
}
frmFileSelect frmSel = new frmFileSelect();
frmSel.InitData(tlVectorControl2.SVGDocument.CurrentElement.ID, tlVectorControl2.SVGDocument.SvgdataUid, true);
frmSel.ShowDialog();
break;
case "mPriQu":
SubPrint = true;
tlVectorControl2.Operation = ToolOperation.InterEnclosure;
break;
case "mReCompute":
if (MessageBox.Show("确认要重新计算全图的电量和负荷么？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes) {
string scale = tlVectorControl2.SVGDocument.getViewScale();
if (scale != "") {
Recalculate(Convert.ToDecimal(scale));
} else {
Recalculate(1);
}
MessageBox.Show("重新计算完成", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
break;
case "mXLine":
tlVectorControl2.Operation = ToolOperation.Select;
tlVectorControl2.Operation = ToolOperation.XPolyLine;
break;
case "mYLine":
tlVectorControl2.Operation = ToolOperation.Select;
tlVectorControl2.Operation = ToolOperation.YPolyLine;
break;
case "mFhbz":
if (MessageBox.Show("是否生成负荷标注?", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes) {
Fhbz();
}
break;
case "mSaveGroup":
if (tlVectorControl2.SVGDocument.SelectCollection.Count > 1) {
string content = "<svg>";
SvgElementCollection col = tlVectorControl2.SVGDocument.SelectCollection;
for (int i = 0; i < col.Count; i++) {
SvgElement _e = (SvgElement)col[i];
if (_e.ID != "svg") {
content = content + _e.OuterXml;
}
}
RectangleF rect = tlVectorControl2.DrawArea.viewer.SelectedViewRectangle;
content = content + "</svg>";
frmSaveGroup fm = new frmSaveGroup();
fm.rect = rect;
fm.Content = content;
fm.ShowDialog();
} else {
MessageBox.Show("请至少选择2个图元。", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
break;
case "mInsert":
frmUseGroup fg = new frmUseGroup();
if (fg.ShowDialog() == DialogResult.OK) {
UseGroup u = fg.SelectedUseGroup;
if (u != null) {
frmXY xy = new frmXY();
if (xy.ShowDialog() == DialogResult.OK) {
decimal x = xy.GetX();
decimal y = xy.GetY();
string content = u.Content;
XmlDocument doc = new XmlDocument();
doc.LoadXml(u.Content);
XmlNodeList list = doc.ChildNodes;
XmlNode _node = list[0];
XmlNodeList sonlist = _node.ChildNodes;
XmlElement ele = tlVectorControl2.SVGDocument.CreateElement("g");
ele.SetAttribute("layer", SvgDocument.currentLayer);
for (int i = 0; i < sonlist.Count; i++) {
XmlNode _sonnode = sonlist[i];
//string str = _sonnode.OuterXml;
if (_sonnode.Name == "use") {
string sid = ((XmlElement)_sonnode).GetAttribute("xlink:href");
XmlNode _snode = symbolSelector.SymbolDoc.SelectSingleNode("//*[@id='" + sid.Substring(1) + "']");
tlVectorControl2.SVGDocument.AddDefsElement((SvgElement)_snode);
}
ele.AppendChild(_sonnode);
string ss = ele.OuterXml;
}
//RectangleF r=((Group)ele).GetBounds();
string tr = "matrix(1,0,0,1,";
tr = tr + Convert.ToString(x - Convert.ToDecimal(u.X)) + ",";
tr = tr + Convert.ToString(y - Convert.ToDecimal(u.Y)) + ")";
ele.SetAttribute("transform", tr);
// transform="matrix(1,0,0,1,2558.82,-352.94)"
tlVectorControl2.SVGDocument.RootElement.AppendChild(ele);
tlVectorControl2.SVGDocument.SelectCollection.Clear();
tlVectorControl2.SVGDocument.SelectCollection.Add((SvgElement)ele);
tlVectorControl2.UnGroup();
// tlVectorControl1.Refresh();
}
}
}
break;
#endregion
}
}
}