public InsteonStandardMessage(DeviceAddress sourceAddress, DeviceAddress targetAddress, byte command1, byte command2, byte flagByte)
{
_sourceAddress = sourceAddress;
_targetAddress = targetAddress;
_command1 = command1;
_command2 = command2;
_flag = (MessageFlag)(flagByte & ((byte)0xE0));
_flagByte = flagByte;
}
public LinkRecord(byte recordControl, byte group, DeviceAddress address, byte localData1, byte localData2, byte localData3)
{
Group = group;
_recordControl = recordControl;
Address = address;
_localData[0] = localData1;
_localData[1] = localData2;
_localData[2] = localData3;
ParseRecordControl();
ParseLocalData();
}
public ThermostatDevice(string name, DeviceAddress address, Mode mode, int setPoint)
: base(name, address)
{
if (mode == Mode.Cooling)
{
CoolSetPoint = setPoint;
HeatSetPoint = -1;
}
else if (mode == Mode.Heating)
{
HeatSetPoint = setPoint;
CoolSetPoint = -1;
}
CurrentMode = mode;
AmbientTemperature = -1;
}
private void ProcessRelatedDeviceEvents(byte command1, byte command2, DeviceAddress fromAddress, DeviceAddress toAddress)
{
Device sourceDevice = FindDeviceForAddress(fromAddress.ToString());
Device targetDevice = FindDeviceForAddress(toAddress.ToString());
// if the target is not an existing device (group target)
// look at address entries for devices that are RESPONDERS to the
// address of the command, matching the group in the address..
if (null == targetDevice || targetDevice is PLMDevice)
{
foreach (string i in _allDevices.Keys)
{
DeviceALDB devALDB = _aldbLibrary.Devices.FirstOrDefault(d => d.DeviceAddress == _allDevices[i].Address.ToString());
if (null == devALDB)
continue;
foreach (ALDBRecord record in devALDB.ALDBRecords)
{
// record not active
if ((record.Flags & 0x80) == 0)
continue;
if ((record.Flags & 0x40) == 0 && // responder
record.AddressToString() == fromAddress.ToString())
{
// log.DebugFormat("Device: {0}, TargetAddress:{1}, Command2: {2}", _allDevices[i].Name, toAddress.ToString(), command2.ToString("X"));
// its possible a kpl button sends a direct message to the PLM and the group # is in cmd2
if (record.Group == toAddress.Byte3 || ((null != targetDevice) && ((targetDevice is PLMDevice) && record.Group == command2)))
{
log.Info(string.Format("Event detected matched ALDB record for device {0}, group {1}. Local Data: {2} {3} {4}", _allDevices[i].Name, record.Group, record.LocalData1.ToString("X"), record.LocalData2.ToString("X"), record.LocalData3.ToString("X")));
if (_allDevices[i] is IMultiButtonDevice)
{
IMultiButtonDevice kplDevice = _allDevices[i] as IMultiButtonDevice;
// update KPL button for the action.. mainly concerned with bits --XXXX--
byte flipMask = 0xFF;
switch (record.LocalData3)
{
case 3:
flipMask = 0x04;
break;
case 4:
flipMask = 0x08;
break;
case 5:
flipMask = 0x10;
break;
case 6:
flipMask = 0x20;
break;
default:
break;
}
if (command1 == Constants.STD_COMMAND_ON || command1 == Constants.STD_COMMAND_FAST_ON)
{
kplDevice.KPLButtonMask |= flipMask;
}
else if (command1 == Constants.STD_COMMAND_OFF || command1 == Constants.STD_COMMAND_FAST_OFF)
{
kplDevice.KPLButtonMask &= (byte)(0xFF ^ flipMask);
}
log.InfoFormat("Updated Button Mask to {0} for device {1}", kplDevice.KPLButtonMask.ToString("X"), _allDevices[i].Name);
}
if ((command1 == Constants.STD_COMMAND_FAST_ON || command1 == Constants.STD_COMMAND_ON) && _allDevices[i].DefaultOffMinutes.HasValue)
_allDevices[i].SetTimer(new DeviceTimerCallBack(DeviceTimerCallBack));
}
}
}
}
}
}
private void ProcessExtendedGetResponse(byte[] message)
{
try
{
byte deviceAddress1 = message[2];
byte deviceAddress2 = message[3];
byte deviceAddress3 = message[4];
DeviceAddress deviceAddress = new DeviceAddress(deviceAddress1, deviceAddress2, deviceAddress3);
Device device = _allDevices[deviceAddress.ToString()];
if (device is IMultiButtonDevice)
{
IMultiButtonDevice multiButtonDevice= device as IMultiButtonDevice;
// for now just get the button mask...
multiButtonDevice.KPLButtonMask = message[21];
if (_gettingExtendedStatus)
_extendedGetWaitHandle.Set();
}
else if (device is ThermostatDevice){
ThermostatDevice thermostatDevice = device as ThermostatDevice;
// message[11] is data 1
// message[13] and 11 would be local temp high and low
// message[15] = data5 = humidity
// message[16] = data6 = tempoffset
// message[17] = data7 = humidity offset
byte systemMode = message[18];
byte fanMode = message[19];
if (fanMode == 0x00)
{
thermostatDevice.Fan = ThermostatDevice.FanMode.Auto;
}
else thermostatDevice.Fan = ThermostatDevice.FanMode.AlwaysOn;
if (systemMode == 0x00)
thermostatDevice.CurrentMode = ThermostatDevice.Mode.Off;
else if (systemMode == 0x01)
thermostatDevice.CurrentMode = ThermostatDevice.Mode.Auto;
else if (systemMode == 0x02)
thermostatDevice.CurrentMode = ThermostatDevice.Mode.Heating;
else if (systemMode == 0x03)
thermostatDevice.CurrentMode = ThermostatDevice.Mode.Cooling;
else
thermostatDevice.CurrentMode = ThermostatDevice.Mode.Program;
if (_gettingThermostatExtended)
_extendedGetWaitHandle.Set();
}
}
catch (Exception ex)
{
log.ErrorFormat("Error processing Extended Get Response");
}
}
public FanDevice(string deviceName, DeviceAddress deviceAddress)
: base(deviceName, deviceAddress)
{
}
private InsteonExtendedMessage CommandBytesToExtendedMessage(byte[] command)
{
DeviceAddress sourceAddress = new DeviceAddress(command[2], command[3], command[4]);
DeviceAddress targetAddress = new DeviceAddress(command[5], command[6], command[7]);
byte messageFlag = command[8];
byte[] extendedData = new byte[14];
Array.Copy(command, 11, extendedData, 0, 14);
InsteonExtendedMessage message = new InsteonExtendedMessage(sourceAddress, targetAddress, command[9], command[10], extendedData, messageFlag);
message.CommandDescription = ExtCommandToString(command[9]);
Device sourceDevice = _allDevices.Values.FirstOrDefault(d => d.Address == sourceAddress);
if (null != sourceDevice)
message.SourceName = sourceDevice.Name;
else
message.SourceName = sourceAddress.StringAddress;
Device targetDevice = _allDevices.Values.FirstOrDefault(d => d.Address == targetAddress);
if (null != targetDevice)
message.TargetName = targetDevice.Name;
else
message.TargetName = targetAddress.StringAddress;
return message;
}
public string SendStandardCommand(DeviceAddress deviceAddress, byte command1, byte command2, byte flags)
{
return SendStandardCommand(deviceAddress, command1, command2, flags, false);
}
public Device(string name, DeviceAddress address)
{
Name = name;
Address = address;
Status = -1;
}
public DeviceStatus GetDeviceStatus(DeviceAddress deviceAddress)
{
byte[] command = new byte[8];
DeviceStatus status = new DeviceStatus();
try
{
if (_allDevices[deviceAddress.ToString()] is ThermostatDevice)
{
_gettingThermostat = true;
command[0] = 0x02;
command[1] = 0x62;
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = 0x0F;
command[6] = Constants.STD_COMMAND_THERMOSTAT_STATUS;
command[7] = 0x00; // temp
_gettingTemp = true;
_plm.Write(command, 0, 8);
_lastSentCommand = command;
_statusEventWaitHandle.Reset();
log.Info("Calling WaitOne on StatusEventWaitHandle for Thermostat Temp");
_statusEventWaitHandle.WaitOne(10000);
log.Info("Completed waiting on temp");
Thread.Sleep(300);
command[0] = 0x02;
command[1] = 0x62;
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = 0x0F;
command[6] = Constants.STD_COMMAND_THERMOSTAT_STATUS;
command[7] = 0x20; // set point
_gettingSetPoint = true;
_plm.Write(command, 0, 8);
_lastSentCommand = command;
_statusEventWaitHandle.Reset();
log.Info("Calling WaitOne on StatusEventWaitHandle for Thermostat set point");
_statusEventWaitHandle.WaitOne(10000);
log.Info("Completed waiting on set point");
Thread.Sleep(300);
command[0] = 0x02;
command[1] = 0x62;
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = 0x0F;
command[6] = Constants.STD_COMMAND_THERMOSTAT_STATUS;
command[7] = 0x60; // humidity
_gettingHumidity = true;
_plm.Write(command, 0, 8);
_lastSentCommand = command;
_statusEventWaitHandle.Reset();
log.Info("Calling WaitOne on StatusEventWaitHandle for Thermostat humidity");
_statusEventWaitHandle.WaitOne(10000);
log.Info("Completed waiting on humidity");
Thread.Sleep(300);
_gettingThermostat = false;
return null;
}
// send a get status command
command[0] = 0x02;
command[1] = 0x62;
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = 0x0F;
command[6] = Constants.STD_COMMAND_STATUS_REQUEST;
command[7] = 0x00;
_gettingStatus = true;
_plm.Write(command, 0, 8);
_lastSentCommand = command;
_statusEventWaitHandle.Reset();
log.Info("Calling WaitOne on StatusEventWaitHandle");
_statusEventWaitHandle.WaitOne(10000);
log.Info("Completed waiting device status handle");
status = new DeviceStatus();
status.Delta = _allDevices[deviceAddress.ToString()].Delta;
status.OnLevel = Math.Round(_allDevices[deviceAddress.ToString()].Status,1);
_gettingStatus = false;
}
catch (Exception ex)
{
log.Error(string.Format("Error getting device status for {0}", deviceAddress.ToString()));
log.Error(ex.Message);
log.Error(ex.StackTrace);
}
return status;
}
public InsteonExtendedMessage(DeviceAddress sourceAddress, DeviceAddress targetAddress, byte command1, byte command2, byte[] data, byte flag)
: base(sourceAddress, targetAddress, command1, command2, flag)
{
_data = data;
}
public RelayDevice(string deviceName, DeviceAddress deviceAddress)
: base(deviceName, deviceAddress)
{
}
public SensorDevice(string deviceName, DeviceAddress deviceAddress)
: base(deviceName, deviceAddress)
{
}
private DeviceAddress GetCustomAddress()
{
if (txtDevAddress.Text.Trim().Length != 6)
{
MessageBox.Show("Invalid Device address to link");
return null;
}
string textAddress = txtDevAddress.Text.Trim();
byte addr1 = StringToByte(textAddress.Substring(0, 2));
byte addr2 = StringToByte(textAddress.Substring(2, 2));
byte addr3 = StringToByte(textAddress.Substring(4));
DeviceAddress devAddress = new DeviceAddress(addr1, addr2, addr3);
return devAddress;
}
private void btnSendStdCommand_Click(object sender, EventArgs e)
{
byte cmd1 = StringToByte(txtCmd1.Text);
byte cmd2 = StringToByte(txtCmd2.Text);
byte flags = StringToByte(txtFlags.Text);
string commandResult = null;
// for sending commands to devices not in our config yet...
if (null == _selectedDevice || _selectedDevice is PLMDevice)
{
DeviceAddress destinationAddress = new DeviceAddress(
StringToByte(txtUD1.Text),
StringToByte(txtUD2.Text),
StringToByte(txtUD3.Text));
commandResult = _handler.SendStandardCommand(destinationAddress,
cmd1, cmd2, flags,true);
return;
}
commandResult = _handler.SendStandardCommand(_selectedDevice.Address, cmd1, cmd2, flags);
rtCommandResults.Text = commandResult;
}
public MultiButtonDimmerDevice(string deviceName, DeviceAddress deviceAddress)
: base(deviceName, deviceAddress)
{
}
//public void ParseCommand(byte[] commandBytes)
//{
// //if (commandBytes.Length < 5)
// //{
// // log.Error(string.Format("Received command not of sufficient length ({0}), command: {1}", commandBytes.Length, BytesToString(commandBytes)));
// // return;
// //}
// if (commandBytes[0] != 0x02)
// {
// log.Error(string.Format("Received Command must start with 0x02. Received command: {0}", BytesToString(commandBytes)));
// return;
// }
// // determine whether the command is an ack
// if (CompareToLastSentCommand(commandBytes))
// {
// // no need to parse ACK commands
// if (commandBytes[_lastSentCommand.Length] == 0x06)
// {
// if (commandBytes.Length > _lastSentCommand.Length + 1)
// {
// byte[] remainingBytes = new byte[commandBytes.Length - (_lastSentCommand.Length + 1)];
// Buffer.BlockCopy(commandBytes, _lastSentCommand.Length + 1, remainingBytes, 0, remainingBytes.Length);
// ParseCommand(remainingBytes);
// }
// _lastSentCommand = null;
// return;
// }
// else if (commandBytes[_lastSentCommand.Length] == 0x15)
// {
// log.Warn(string.Format("Received NAK for Command {0}", BytesToString(commandBytes)));
// _lastSentCommand = null;
// return;
// }
// }
// if (0x50 == commandBytes[1]) // STD message received (11 bytes)
// {
// if (commandBytes.Length < 11)
// {
// log.Error(string.Format("Bad standard command received {0}", BytesToString(commandBytes)));
// return;
// }
// byte[] singleCommand = new byte[11];
// for (int i = 0; i < 11; i++)
// {
// singleCommand[i]=commandBytes[i];
// }
// ProcessStandardReceivedMessage(singleCommand);
// if (commandBytes.Length > 11)
// {
// byte[] remainingBytes = new byte[commandBytes.Length - 11];
// Buffer.BlockCopy(commandBytes, 11, remainingBytes, 0, commandBytes.Length - 11);
// ParseCommand(remainingBytes);
// }
// }
// else if (0x51 == commandBytes[1]) // EXT message received
// {
// if (commandBytes.Length < 25)
// {
// log.Error(string.Format("Bad extended command received {0}", BytesToString(commandBytes)));
// return;
// }
// byte[] singleCommand = new byte[25];
// for (int i = 0; i < 25; i++)
// {
// singleCommand[i]=commandBytes[i];
// }
// }
//}
//public void SetLastCommand(byte[] cmd)
//{
// _lastSentCommand = cmd;
//}
private void ProcessStandardReceivedMessage(byte[] message)
{
DeviceAddress fromAddress = new DeviceAddress(message[2],message[3],message[4]);
DeviceAddress toAddress = new DeviceAddress(message[5], message[6], message[7]);
// check flags for group/device
byte flagByte = (byte)(message[8] & (byte)0xE0);
MessageFlag flag = (MessageFlag)flagByte;
string flagDescription = "unknown";
switch (flag)
{
case MessageFlag.DirectMessage:
flagDescription = "Direct Message";
break;
case MessageFlag.ACKDirectMessage:
flagDescription = "ACK Direct Message";
break;
case MessageFlag.ACKGroupCleanupDirectMessage:
flagDescription = "ACK Group Cleanup DM";
break;
case MessageFlag.BroadcastMessage:
flagDescription = "Broadcast Message";
break;
case MessageFlag.GroupBroadcastMessage:
flagDescription = "Group Broadcast Message";
break;
case MessageFlag.GroupCleanupDirectMessage:
flagDescription = "Group Cleanup DM";
break;
case MessageFlag.NAKDirectMessage:
flagDescription = "NAK Direct Message";
break;
case MessageFlag.NAKGroupCleanupDirectMessage:
flagDescription = "NAK Group Cleanup DM";
break;
default:
break;
}
if ((message[8] & 0x10) != 0) // standard message
{
log.Error(string.Format("Process Standard Received Message got extended message flag"));
return;
}
int retransmissions = (message[8] & 0x0C) >> 2;
int maxHops = message[8] & 0x03;
byte command1 = message[9];
byte command2=message[10];
string commandType = "unknown";
Device sourceDevice = FindDeviceForAddress(fromAddress.ToString());
Device targetDevice = FindDeviceForAddress(toAddress.ToString());
if (null != targetDevice && targetDevice is PLMDevice)
{
if (_gettingStatus)
{
byte delta = 0x00;
//if (_gettingOpFlags)
//{
// delta = message[10];
// sourceDevice.Delta = delta;
// log.InfoFormat("Attempting to read database delta from ops flags, result: {0}", delta);
//}
//else
//{
// read the command2 and 1 of the response to get the level as well
byte level = message[10];
delta = message[9];
sourceDevice.Status = ((int)level / 255m) * 100m;
sourceDevice.Delta = delta;
//}
_statusEventWaitHandle.Set();
}
else if (sourceDevice is ThermostatDevice)
{
if (_gettingThermostat)
{
if (command1 == 0x6A)
{
if (_gettingTemp)
{
((ThermostatDevice)sourceDevice).AmbientTemperature = (int)Math.Round(((decimal)command2) / 2m,0);
_gettingTemp = false;
}
else if (_gettingSetPoint)
{
if (((ThermostatDevice)sourceDevice).CurrentMode == ThermostatDevice.Mode.Cooling)
((ThermostatDevice)sourceDevice).CoolSetPoint = (int)Math.Round(((decimal)command2) / 2m, 0);
else
((ThermostatDevice)sourceDevice).HeatSetPoint = (int)Math.Round(((decimal)command2) / 2m, 0);
_gettingSetPoint = false;
}
else if (_gettingHumidity)
{
((ThermostatDevice)sourceDevice).Humidity = (int)command2;
_gettingHumidity = false;
}
else
log.WarnFormat("Received thermostat update {0} and unsure of what we requested.", command2.ToString("X"));
_statusEventWaitHandle.Set();
}
return;
}
ThermostatDevice thermostat = sourceDevice as ThermostatDevice;
switch (command1)
{
case Constants.STD_COMMAND_THERMOSTAT_STATUS_TEMP:
thermostat.AmbientTemperature = (int)Math.Round(((decimal)command2) * 0.5m, 0);
log.InfoFormat("Received temperature update: {0}", thermostat.AmbientTemperature);
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Temperature detected: {0}°F", thermostat.AmbientTemperature)));
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_HUMIDITY:
thermostat.Humidity = (int)command2;
log.InfoFormat("Received humidity update: {0}", thermostat.Humidity);
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_MODE_FAN:
log.InfoFormat("Thermostat mode byte: {0}", command2.ToString("X"));
// extract mode, low byte 0=off,1=heat,2=cool,3=auto,4=program
if ((command2 & 0x0F) == 0x00)
thermostat.CurrentMode = ThermostatDevice.Mode.Off;
else if ((command2 & 0x0F) == 0x01)
thermostat.CurrentMode = ThermostatDevice.Mode.Heating;
else if ((command2 & 0x0F) == 0x02)
thermostat.CurrentMode = ThermostatDevice.Mode.Cooling;
else if ((command2 & 0x0F) == 0x03)
thermostat.CurrentMode = ThermostatDevice.Mode.Auto;
else if ((command2 & 0x0F) == 0x04)
thermostat.CurrentMode = ThermostatDevice.Mode.Program;
else
log.WarnFormat("Unable to determine mode from status byte: {0}", command2.ToString("X"));
// extract fan info, high byte command 2, 0=auto,1=alwayson
if ((command2 & 0xF0) == 0x00)
thermostat.Fan = ThermostatDevice.FanMode.Auto;
else if ((command2 & 0xF0) == 0x10)
thermostat.Fan = ThermostatDevice.FanMode.AlwaysOn;
else
log.WarnFormat("Unable to determine fan from status byte: {0}", command2.ToString("X"));
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Mode: {0}, Fan: {1}", thermostat.CurrentMode, thermostat.Fan)));
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_COOL_SET:
thermostat.CoolSetPoint = (int)(command2);
log.InfoFormat("Received thermostat cool setpoint update: {0}", thermostat.CoolSetPoint);
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Cool set point: {0}", thermostat.CoolSetPoint)));
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_HEAT_SET:
thermostat.HeatSetPoint = (int)(command2);
log.InfoFormat("Received thermostat heat setpoint update: {0}", thermostat.HeatSetPoint);
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Heat set point: {0}", thermostat.HeatSetPoint)));
break;
default:
log.InfoFormat("Unknown message from thermostat device received: {0}", command1.ToString("X"));
break;
}
}
// this is received before the ALDB comes, its part of a sequence of extended messages
// but 0x2F as a standard message is LightOffAtRampRate
if (command1 == 0x2F)
{
log.Info(string.Format("Received Message from {0} to {1} of type: ({2}):{3} ({4})", GetDeviceName(fromAddress.ToString()), GetDeviceName(toAddress.ToString()), command1.ToString("X"), command2.ToString("X"), flagDescription));
log.Info("Beginning of ALDB records.");
return;
} // same as above but for reading device info
else if (command1 == 0x2E)
{
log.Info(string.Format("Received Message from {0} to {1} of type: ({2}):{3} ({4})", GetDeviceName(fromAddress.ToString()), GetDeviceName(toAddress.ToString()), command1.ToString("X"), command2.ToString("X"), flagDescription));
log.Info("Beginning of Extended Read");
return;
}
}
switch (command1)
{
case Constants.STD_COMMAND_BEEP:
break;
case Constants.STD_COMMAND_BRIGHT:
break;
case Constants.STD_COMMAND_DIM:
commandType = "Dim";
break;
case Constants.STD_COMMAND_FAST_OFF:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.Status = 0;
sourceDevice.LastOff = DateTime.Now;
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Fast off by keypress.")));
}
}
commandType = "FastOff";
break;
case Constants.STD_COMMAND_FAST_ON:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.LastOn = DateTime.Now;
if (sourceDevice is DimmerDevice)
sourceDevice.Status = (command2 * 100) / 0xFF;
else
sourceDevice.Status = 100;
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Fast on by keypress.")));
}
}
// setting a timer on an ack message is redundant
if (sourceDevice.DefaultOffMinutes.HasValue && ((flag & MessageFlag.ACKDirectMessage) != MessageFlag.ACKDirectMessage))
{
log.DebugFormat("Setting default off timer for device: {0} minutes.", sourceDevice.DefaultOffMinutes.Value);
sourceDevice.SetTimer(new Devices.DeviceTimerCallBack(DeviceTimerCallBack));
}
commandType = "FastOn";
break;
case Constants.STD_COMMAND_GET_OP_FLAGS:
break;
case Constants.STD_COMMAND_LIGHT_INSTANT_CHANGE:
break;
case Constants.STD_COMMAND_LIGHT_MANUAL_OFF:
commandType = "LightManualOff";
break;
case Constants.STD_COMMAND_LIGHT_MANUAL_ON:
commandType = "LightManualOn";
break;
case Constants.STD_COMMAND_LIGHT_RAMP_OFF:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.Status = 0;
sourceDevice.LastOff = DateTime.Now;
}
}
commandType = "LightRampOff";
break;
case Constants.STD_COMMAND_LIGHT_RAMP_ON:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.LastOn = DateTime.Now;
if (sourceDevice is DimmerDevice)
sourceDevice.Status = (command2 * 100) / 0xFF;
else
sourceDevice.Status = 100;
}
}
if (sourceDevice.DefaultOffMinutes.HasValue)
{
log.DebugFormat("Setting default off timer for device: {0} minutes.", sourceDevice.DefaultOffMinutes.Value);
sourceDevice.SetTimer(new DeviceTimerCallBack(DeviceTimerCallBack));
}
commandType = "LightRampOn";
break;
case Constants.STD_COMMAND_LIGHT_SET_STATUS:
commandType = "LightSetStatus";
break;
case Constants.STD_COMMAND_OFF:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.Status = 0;
sourceDevice.LastOff = DateTime.Now;
if (!(sourceDevice is ThermostatDevice))
{
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Turned off by keypress.")));
}
}
}
commandType = "CommandOff";
break;
case Constants.STD_COMMAND_ON:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.LastOn = DateTime.Now;
if (sourceDevice is DimmerDevice)
sourceDevice.Status = (command2 * 100) / 0xFF;
else if (sourceDevice is SensorDevice)
sourceDevice.Status = 0;// dont actually turn on
else
sourceDevice.Status = 100;
if (!(sourceDevice is ThermostatDevice))
{
if (sourceDevice is SensorDevice)
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Motion Detected")));
else
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Turned on by keypress.")));
}
}
}
if (sourceDevice.DefaultOffMinutes.HasValue)
{
log.DebugFormat("Setting default off timer for device: {0} minutes.", sourceDevice.DefaultOffMinutes.Value);
sourceDevice.SetTimer(new DeviceTimerCallBack(DeviceTimerCallBack));
}
if (sourceDevice.Name == "zone1IOLinc")
{
if (null != PartyDetected)
{
PartyDetected(this);
}
}
commandType = "CommandOn";
break;
case Constants.STD_COMMAND_REMOTE_SET_BUTTON_TAP:
break;
case Constants.STD_COMMAND_SET_OP_FLAGS:
break;
case Constants.STD_COMMAND_START_MANUAL:
commandType = "StartManual";
break;
case Constants.STD_COMMAND_STATUS_REQUEST:
break;
case Constants.STD_COMMAND_STOP_MANUAL:
commandType = "StopManual";
break;
default:
break;
}
ProcessRelatedDeviceEvents(command1, command2, fromAddress, toAddress);
log.Info(string.Format("Received Message from {0} to {1} of type: {2}({3}):{4} ({5})", GetDeviceName(fromAddress.ToString()), GetDeviceName(toAddress.ToString()), commandType, command1.ToString("X"), command2.ToString("X"), flagDescription));
if (null != InsteonTrafficDetected)
{
InsteonTrafficEventArgs args = new InsteonTrafficEventArgs();
args.Source = _allDevices.ContainsKey(fromAddress.ToString()) ? _allDevices[fromAddress.ToString()] : null;
args.Destination = toAddress;
args.Flags = flag;
args.Command1 = command1;
args.Command2 = command2;
args.Description = string.Format("Command={0}/DestName={1}", commandType, GetDeviceName(toAddress.ToString()));
InsteonTrafficDetected(this, args);
}
}
public void GetThermostatExtendedInformation(DeviceAddress deviceAddress)
{
byte[] command = new byte[22];
try
{
// send a get status command
command[0] = 0x02;
command[1] = 0x62;
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = 0x1F;
command[6] = Constants.EXT_COMMAND_EXTENDED_GET_SET;
command[7] = 0x00;
command[8] = 0x00;
_plm.Write(command, 0, 22);
_lastSentCommand = command;
_gettingThermostatExtended = true;
_extendedGetWaitHandle.Reset();
log.Info("Calling WaitOne on ExtendedGetWaitHandle");
_extendedGetWaitHandle.WaitOne(5000);
log.Info("ExtendedGetWaitHandle finished");
_gettingThermostatExtended = false;
}
catch (Exception ex)
{
log.Error(string.Format("Error getting thermostat extended Information for device: {0}", deviceAddress.ToString()));
log.Error(ex.Message);
log.Error(ex.StackTrace);
}
}
public void GetALDBForDevice(DeviceAddress address)
{
GetAddressRecords(address);
log.Info("Waiting on ALDB Event Handle");
_aldbEventWaitHandle.WaitOne(10000);
log.Info("Finished Waiting on ALDB entry.");
}
public void SendExtendedCommand(DeviceAddress deviceAddress, byte command1, byte command2, byte flags, bool checksum, params byte[] userData)
{
SendExtendedCommand(deviceAddress, command1, command2, flags,checksum, false, userData);
}
public InsteonHandler(string comPort, bool saveALDB)
{
// read the configuration file
SlapsteonConfigurationSection slapsteonConfiguration =
ConfigurationManager.GetSection("slapsteon") as SlapsteonConfigurationSection;
try
{
_plm = new SerialPort(comPort, 19200, Parity.None, 8, StopBits.One);
log.Info("Opening serial port " + comPort);
_plm.Open();
log.Info("Successfully connected to PLM.");
}
catch (Exception ex)
{
log.Error("Error opening serial port", ex);
throw ex;
}
_plm.DataReceived += new SerialDataReceivedEventHandler(_plm_DataReceived);
Thread.Sleep(500);
this.SetMonitorMode();
string deviceALDBPathSetting = ConfigurationManager.AppSettings["deviceXMLPath"];
if (!string.IsNullOrEmpty(deviceALDBPathSetting))
_deviceALDBPath=deviceALDBPathSetting;
if (null == slapsteonConfiguration)
throw new ConfigurationErrorsException("The configuration needs a <slapsteon> section.");
foreach (SlapsteonDeviceConfigurationElement element in slapsteonConfiguration.SlapsteonDevices)
{
string deviceName = element.Name;
byte address1 = StringToByte(element.Address.Substring(0, 2));
byte address2 = StringToByte(element.Address.Substring(2, 2));
byte address3 = StringToByte(element.Address.Substring(4, 2));
DeviceAddress deviceAddress= new DeviceAddress(address1, address2, address3);
Device dev = null;
if ((element.IsKPL.HasValue && element.IsKPL.Value) && (!element.IsDimmable.HasValue || !element.IsDimmable.Value))
dev = new MultiButtonRelayDevice(deviceName, deviceAddress);
else if ((element.IsKPL.HasValue && element.IsKPL.Value) && (element.IsDimmable.HasValue && element.IsDimmable.Value))
dev = new MultiButtonDimmerDevice(deviceName, deviceAddress);
else if (element.IsBatteryDevice.HasValue && element.IsBatteryDevice.Value)
dev = new SensorDevice(deviceName, deviceAddress);
else if (element.IsFan.HasValue && element.IsFan.Value)
dev = new FanDevice(deviceName, deviceAddress);
else if (element.IsDimmable.HasValue && element.IsDimmable.Value)
dev = new DimmerDevice(deviceName, deviceAddress);
else if (element.IsPLM.HasValue && element.IsPLM.Value)
dev = new PLMDevice(deviceName, deviceAddress);
else if (element.IsIODevice.HasValue && element.IsIODevice.Value)
dev = new IODevice(deviceName, deviceAddress);
else if (element.IsThermostat.HasValue && element.IsThermostat.Value)
{
int setPoint = 0;
if (!int.TryParse(element.ThermostatSetPoint, out setPoint))
{
setPoint = 70;
}
ThermostatDevice.Mode thermostatMode = ThermostatDevice.Mode.Cooling;
if (element.ThermostatMode == "cool")
thermostatMode = ThermostatDevice.Mode.Cooling;
else
thermostatMode = ThermostatDevice.Mode.Heating;
dev = new ThermostatDevice(deviceName, deviceAddress, thermostatMode, setPoint);
}
else
dev = new RelayDevice(deviceName, deviceAddress);
dev.DefaultOffMinutes = element.DefaultOffMinutes;
dev.IsOnAtSunset = element.IsOnAtSunset ?? false;
dev.IsOffAtSunrise = element.IsOffAtSunrise ?? false;
dev.Floor = element.Floor;
// load random schedule settings
dev.IsRandomOn = element.IsRandomOn ?? false;
dev.RandomOnStart = element.RandomStartTime;
dev.RandomRunDuration = element.RandomRunDuration;
dev.RandomDurationMin = element.RandomDurationMin;
dev.RandomDurationMax = element.RandomDurationMax;
dev.RandomOnChance = element.RandomOnChance;
_allDevices.Add(deviceAddress.ToString(), dev);
}
// iterate through the list once more for slave devices
foreach (SlapsteonDeviceConfigurationElement element in slapsteonConfiguration.SlapsteonDevices)
{
if (string.IsNullOrEmpty(element.SlaveDevices))
continue;
byte address1 = StringToByte(element.Address.Substring(0, 2));
byte address2 = StringToByte(element.Address.Substring(2, 2));
byte address3 = StringToByte(element.Address.Substring(4, 2));
DeviceAddress deviceAddress = new DeviceAddress(address1, address2, address3);
string[] slaveDeviceList = element.SlaveDevices.Split(',', '|', ' ');
List<Device> slaveDevices = new List<Device>();
foreach (string slaveDeviceName in slaveDeviceList)
{
Device slaveDevice = _allDevices.Values.FirstOrDefault(d => d.Name.ToUpper() == slaveDeviceName.ToUpper());
if (null == slaveDevice)
continue;
slaveDevice.IsSlaveDevice = true;
slaveDevices.Add(slaveDevice);
}
_allDevices[deviceAddress.ToString()].SlaveDevices = slaveDevices;
log.Debug(string.Format("added {0} slave device(s) for device {1}", slaveDevices.Count, element.Name));
}
// deserialize the DeviceALDB
DeserializeStoredDeviceALDB();
GetStatusForAllDevices();
Thread.Sleep(300);
GetALDBForAllDevices();
if (saveALDB)
SerializeDeviceALDB();
}
public DimmerDevice(string deviceName, DeviceAddress deviceAddress)
: base(deviceName, deviceAddress)
{
}
public void RefreshThermostatDevice(DeviceAddress address)
{
}
private InsteonStandardMessage CommandBytesToStandardMessage(byte[] command)
{
DeviceAddress sourceAddress = new DeviceAddress(command[2], command[3], command[4]);
DeviceAddress targetAddress =new DeviceAddress(command[5], command[6], command[7]);
byte messageFlag = command[8];
InsteonStandardMessage message = new InsteonStandardMessage(sourceAddress, targetAddress, command[9], command[10], messageFlag);
message.CommandDescription = StdCommandToString(command[9]);
Device sourceDevice = _allDevices.Values.FirstOrDefault(d => d.Address.StringAddress == sourceAddress.StringAddress);
if (null != sourceDevice)
message.SourceName = sourceDevice.Name;
else
message.SourceName = sourceAddress.StringAddress;
Device targetDevice = _allDevices.Values.FirstOrDefault(d => d.Address.StringAddress == targetAddress.StringAddress);
if (null != targetDevice)
message.TargetName = targetDevice.Name;
else
message.TargetName = targetAddress.StringAddress;
return message;
}
public void SendExtendedCommand(DeviceAddress deviceAddress, byte command1, byte command2, byte flags, bool checksum, bool isUnknownDevice, params byte[] userData)
{
byte[] command = new byte[22];
Device targetDevice = null;
if (!isUnknownDevice && !_allDevices.TryGetValue(deviceAddress.ToString(), out targetDevice))
throw new Exception("No known device matched the specified address.");
if (userData.Length > 14)
throw new Exception("Invalid userdata specified");
try
{
lock (this)
{
int total = command1 + command2;
command[0] = 0x02; // Insteon start byte
command[1] = 0x62; // Standard Command
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = flags |= 0x10; // for standard 0x0F is good
command[6] = command1;
command[7] = command2;
if (null != userData)
{
for (int i = 0; i < userData.Length; i++)
{
command[8 + i] = userData[i];
total += userData[i];
}
}
if (checksum)
command[21] = (byte)((total ^ 0xFF) + 1);
_plm.Write(command, 0, 22);
Thread.Sleep(250);
log.Info(string.Format("Sent command {0} to device {1}. (Command2: {2}, Flags: {3})", command1.ToString("X"), null != targetDevice ? targetDevice.Name : "Unknown", command2.ToString("X"), flags.ToString("X")));
_lastSentCommand = command;
}
}
catch (Exception ex)
{
log.Error(string.Format("Error sending command {0} to {1}. (Flags: {2})", command1.ToString("X"), null != targetDevice ? targetDevice.Name : "Unknown", flags.ToString("X")), ex);
}
}
private void GetAddressRecords(DeviceAddress address)
{
try
{
// send the get address command
byte[] command = new byte[22];
command[0] = 0x02;
command[1] = 0x62; // Standard Command
command[2] = address.Byte1;
command[3] = address.Byte2;
command[4] = address.Byte3;
command[5] = 0x1F; // for standard 0x0F is good, this is extended
command[6] = Constants.EXT_COMMAND_READ_WRITE_ALDB;
command[7] = 0x00;
_plm.Write(command, 0, 22);
}
catch (Exception ex)
{
}
}
public string SendStandardCommand(DeviceAddress deviceAddress, byte command1, byte command2, byte flags, bool isUnknownDevice)
{
string results = null;
Device targetDevice = null;
if (!isUnknownDevice && !_allDevices.TryGetValue(deviceAddress.ToString(), out targetDevice))
throw new Exception("No known device matched the specified address.");
byte[] command = new byte[8];
try
{
command[0] = 0x02; // Insteon start byte
command[1] = 0x62; // Standard Command
command[2] = deviceAddress.Byte1;
command[3] = deviceAddress.Byte2;
command[4] = deviceAddress.Byte3;
command[5] = flags; // for standard 0x0F is good
command[6] = command1;
command[7] = command2;
_plm.Write(command, 0, 8);
log.Debug(string.Format("Sent Standard Command {0} to device {1} (address: {2})", command1.ToString("X"), null != targetDevice ? targetDevice.Name : "Unknown", null != targetDevice ? targetDevice.AddressString : deviceAddress.ToString()));
if (null == targetDevice)
return null;
// write more to the command for slave devices
foreach (Device slaveDevice in targetDevice.SlaveDevices)
{
Thread.Sleep(250);
log.Debug(string.Format("Sending duplicate command {0} for slave device {1} (address: {2})", command1.ToString("X"), slaveDevice.Name, slaveDevice.AddressString));
command = new byte[8];
command[0] = 0x02; // Insteon start byte
command[1] = 0x62; // Standard Command
command[2] = slaveDevice.Address.Byte1;
command[3] = slaveDevice.Address.Byte2;
command[4] = slaveDevice.Address.Byte3;
command[5] = flags; // for standard 0x0F is good
command[6] = command1;
command[7] = command2;
_plm.Write(command, 0, 8);
}
}
catch (Exception ex)
{
log.Error(string.Format("Error sending command {0} to {1}. (Flags: {2})", command1.ToString("X"), null != targetDevice ? targetDevice.Name : deviceAddress.ToString(), flags.ToString("X")), ex);
}
return results;
}
private void ProcessALDBResponse(byte[] message)
{
try
{
_lastALDBRecordTime = DateTime.Now;
byte deviceAddress1 = message[2];
byte deviceAddress2 = message[3];
byte deviceAddress3 = message[4];
DeviceAddress deviceAddress = new DeviceAddress(deviceAddress1, deviceAddress2, deviceAddress3);
Device device = _allDevices[deviceAddress.ToString()];
DeviceALDB deviceALDB = null;
// record isnt in out ALDB Library yet
if (!_aldbLibrary.Devices.Exists(a => a.DeviceAddress == deviceAddress.ToString()))
{
deviceALDB = new DeviceALDB();
deviceALDB.DeviceAddress = deviceAddress.ToString();
deviceALDB.Delta = device.Delta;
_aldbLibrary.Devices.Add(deviceALDB);
}
else
deviceALDB = _aldbLibrary.Devices.First(a => a.DeviceAddress == deviceAddress.ToString());
// redundant...we should be doing this before we even pull the ALDB
//if (device.Delta != device.DeviceALDB.Delta)
// log.DebugFormat("Device Delta {0} did not match the stored version {1}", device.Delta.ToString("X"), device.DeviceALDB.Delta.ToString("X"));
ALDBRecord record = new ALDBRecord();
record.AddressMSB = message[13];
record.AddressLSB = message[14];
record.Flags = message[16];
record.Group = message[17];
record.Address1 = message[18];
record.Address2 = message[19];
record.Address3 = message[20];
record.LocalData1 = message[21];
record.LocalData2 = message[22];
record.LocalData3 = message[23];
if ((record.Flags == 0x00) && ((record.Address1 == 0x00) && (record.Address2 == 0x00) && (record.Address3 == 0x00)))
{
_aldbFinishedForDevice = true;
log.Info("Reached last address record.");
_aldbEventWaitHandle.Set();
return;
}
deviceALDB.ALDBRecords.Add(record);
}
catch (Exception ex)
{
log.ErrorFormat("Error processing ALDB Response");
}
}
private void ProcessAllLinkResponse(byte[] allLinkMessage)
{
// 02 57 A2/E2 GRP ADR1 ADR2 ADR3 Local Data
DeviceAddress address = new DeviceAddress(allLinkMessage[4], allLinkMessage[5], allLinkMessage[6]);
LinkRecord linkRecord = new LinkRecord(allLinkMessage[2], allLinkMessage[3], address, allLinkMessage[7], allLinkMessage[8], allLinkMessage[9]);
linkRecord.ReferenceDeviceName = GetDeviceName(address.StringAddress);
_imLinks.Add(linkRecord);
}
public MultiButtonRelayDevice(string deviceName, DeviceAddress deviceAddress)
: base(deviceName, deviceAddress)
{
}