// ad node to openModel
private Point3D AddNodeToOpenModel(StructuralPointConnection conPoint, OpenModel openStructModel, int id = 0)
{
var pt = openStructModel.Point3D.Find(c => IsEqual(c.X, conPoint.X.GetValueOrDefault(), limits) && IsEqual(c.Y, conPoint.Y.GetValueOrDefault(), limits) && IsEqual(c.Z, conPoint.Z.GetValueOrDefault(), limits));
if (pt != null)
{
return(pt);
}
else
{
IdeaRS.OpenModel.Geometry3D.Point3D point = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = conPoint.X.GetValueOrDefault(), Y = conPoint.Y.GetValueOrDefault(), Z = conPoint.Z.GetValueOrDefault()
};
point.Id = (id > 0 ? id : (openStructModel.GetMaxId(point) + 1));
point.Name = point.Id.ToString();
openStructModel.Point3D.Add(point);
return(point);
}
}
static private OpenModel CreateConnectionGeometry(OpenModel openModel)
{
//Add connection point
IdeaRS.OpenModel.Connection.ConnectionPoint connection = new IdeaRS.OpenModel.Connection.ConnectionPoint();
IdeaRS.OpenModel.Geometry3D.Point3D point = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2, Y = 3, Z = 3
};
point.Id = openModel.GetMaxId(point) + 1;
point.Name = point.Id.ToString();
openModel.Point3D.Add(point);
connection.Node = new ReferenceElement(point);
connection.Name = point.Name;
connection.Id = openModel.GetMaxId(connection) + 1;
//add connection
openModel.Connections.Add(new IdeaRS.OpenModel.Connection.ConnectionData());
//add Beams
openModel.Connections[0].Beams = new List <IdeaRS.OpenModel.Connection.BeamData>();
//member1D 1
IdeaRS.OpenModel.Connection.BeamData beam1Data = new IdeaRS.OpenModel.Connection.BeamData
{
Name = "M1",
Id = 1,
OriginalModelId = "1",
IsAdded = false,
MirrorY = false,
RefLineInCenterOfGravity = false,
};
openModel.Connections[0].Beams.Add(beam1Data);
var member1 = openModel.Member1D.Find(x => x.Id == 1);
IdeaRS.OpenModel.Connection.ConnectedMember conMb = new IdeaRS.OpenModel.Connection.ConnectedMember
{
Id = member1.Id,
MemberId = new ReferenceElement(member1),
IsContinuous = false,
};
connection.ConnectedMembers.Add(conMb);
//member1D 3
var member3 = openModel.Member1D.Find(x => x.Id == 3);
IdeaRS.OpenModel.Connection.ConnectedMember conMb3 = new IdeaRS.OpenModel.Connection.ConnectedMember
{
Id = member3.Id,
MemberId = new ReferenceElement(member3),
IsContinuous = true,
};
connection.ConnectedMembers.Add(conMb3);
IdeaRS.OpenModel.Connection.BeamData beam2Data = new IdeaRS.OpenModel.Connection.BeamData
{
Name = "M3",
Id = 3,
OriginalModelId = member3.Id.ToString(),
IsAdded = false,
MirrorY = false,
RefLineInCenterOfGravity = false,
};
openModel.Connections[0].Beams.Add(beam2Data);
openModel.AddObject(connection);
//add plate
IdeaRS.OpenModel.Connection.PlateData plateData = new IdeaRS.OpenModel.Connection.PlateData
{
Name = "P1",
Thickness = 0.02,
Id = 11,
Material = "S355",
OriginalModelId = "11",
Origin = new IdeaRS.OpenModel.Geometry3D.Point3D
{
X = -1.87,
Y = 2.88,
Z = 2.7
},
AxisX = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 1,
Z = 0
},
AxisY = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 0,
Z = 1
},
AxisZ = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 1,
Y = 0,
Z = 0
},
Region = "M 0 0 L 0.24 0 L 0.24 0.5 L 0 0.5 L 0 0",
};
(openModel.Connections[0].Plates ?? (openModel.Connections[0].Plates = new List <IdeaRS.OpenModel.Connection.PlateData>())).Add(plateData);
// add cut
openModel.Connections[0].CutBeamByBeams = new List <IdeaRS.OpenModel.Connection.CutBeamByBeamData>
{
new IdeaRS.OpenModel.Connection.CutBeamByBeamData
{
CuttingObject = new ReferenceElement(plateData),
ModifiedObject = new ReferenceElement(beam1Data),
Orientation = CutOrientation.Parallel,
WeldType = WeldType.DoubleFillet,
IsWeld = true,
}
};
IdeaRS.OpenModel.Connection.BoltGrid boltGrid = new IdeaRS.OpenModel.Connection.BoltGrid()
{
Id = 41,
ConnectedPartIds = new List <string>(),
Diameter = 0.016,
HeadDiameter = 0.024,
DiagonalHeadDiameter = 0.026,
HeadHeight = 0.01,
BoreHole = 0.018,
TensileStressArea = 157,
NutThickness = 0.013,
AnchorLen = 0.05,
Material = "8.8",
Standard = "M 16",
};
boltGrid.Origin = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = plateData.Origin.X, Y = plateData.Origin.Y, Z = plateData.Origin.Z
};
boltGrid.AxisX = new IdeaRS.OpenModel.Geometry3D.Vector3D()
{
X = plateData.AxisX.X, Y = plateData.AxisX.Y, Z = plateData.AxisX.Z
};
boltGrid.AxisY = new IdeaRS.OpenModel.Geometry3D.Vector3D()
{
X = plateData.AxisY.X, Y = plateData.AxisY.Y, Z = plateData.AxisY.Z
};
boltGrid.AxisZ = new IdeaRS.OpenModel.Geometry3D.Vector3D()
{
X = plateData.AxisZ.X, Y = plateData.AxisZ.Y, Z = plateData.AxisZ.Z
};
boltGrid.Positions = new List <IdeaRS.OpenModel.Geometry3D.Point3D>
{
new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.87,
Y = 2.92,
Z = 2.8
},
new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.87,
Y = 3.08,
Z = 2.8
},
new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.87,
Y = 2.92,
Z = 3.15
},
new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.87,
Y = 3.08,
Z = 3.15
}
};
boltGrid.ConnectedPartIds = new List <string>()
{
beam2Data.OriginalModelId, plateData.OriginalModelId
};
(openModel.Connections[0].BoltGrids ?? (openModel.Connections[0].BoltGrids = new List <IdeaRS.OpenModel.Connection.BoltGrid>())).Add(boltGrid);
//add plate 2
IdeaRS.OpenModel.Connection.PlateData plateData2 = new IdeaRS.OpenModel.Connection.PlateData
{
Name = "P2",
Thickness = 0.02,
Id = 12,
Material = "S355",
OriginalModelId = "12",
Origin = new IdeaRS.OpenModel.Geometry3D.Point3D
{
X = -2.103,
Y = 2.88,
Z = 2.75
},
AxisX = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 1,
Y = 0,
Z = 0
},
AxisY = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 1,
Z = 0
},
AxisZ = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 0,
Z = 1
},
Region = "M 0 0 L 0.206 0 L 0.206 0.105 L 0.195 0.115 L 0.011 0.115 L 0.0 0.105 L 0 0",
};
(openModel.Connections[0].Plates ?? (openModel.Connections[0].Plates = new List <IdeaRS.OpenModel.Connection.PlateData>())).Add(plateData2);
//add weld between memeber 2 and plate 2 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 31,
ConnectedPartIds = new List <string>()
{
plateData2.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 2.995,
Z = 2.76
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 2.995,
Z = 2.76
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
(openModel.Connections[0].Welds ?? (openModel.Connections[0].Welds = new List <IdeaRS.OpenModel.Connection.WeldData>())).Add(weldData);
//add weld3 between memeber 2 and plate 2 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData3 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 33,
ConnectedPartIds = new List <string>()
{
plateData2.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 2.90,
Z = 2.76
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 2.90,
Z = 2.76
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData3);
//add weld4 between memeber 2 and plate 2 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData4 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 34,
ConnectedPartIds = new List <string>()
{
plateData2.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 2.90,
Z = 2.76
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 2.90,
Z = 2.76
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData4);
//add plate 3
IdeaRS.OpenModel.Connection.PlateData plateData3 = new IdeaRS.OpenModel.Connection.PlateData
{
Name = "P3",
Thickness = 0.02,
Id = 13,
Material = "S355",
OriginalModelId = "13",
Origin = new IdeaRS.OpenModel.Geometry3D.Point3D
{
X = -2.103,
Y = 2.88,
Z = 3.1
},
AxisX = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 1,
Y = 0,
Z = 0
},
AxisY = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 1,
Z = 0
},
AxisZ = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 0,
Z = 1
},
Region = "M 0 0 L 0.206 0 L 0.206 0.105 L 0.195 0.115 L 0.011 0.115 L 0.0 0.105 L 0 0",
};
openModel.Connections[0].Plates.Add(plateData3);
//add weld between memeber 2 and plate 3 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData2 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 32,
ConnectedPartIds = new List <string>()
{
plateData3.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 2.995,
Z = 3.11
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 2.995,
Z = 3.11
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData2);
//add weld5 between memeber 2 and plate 3 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData5 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 35,
ConnectedPartIds = new List <string>()
{
plateData3.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 2.90,
Z = 3.11
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 2.90,
Z = 3.11
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData5);
//add weld6 between memeber 2 and plate 3 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData6 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 36,
ConnectedPartIds = new List <string>()
{
plateData3.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 2.90,
Z = 3.11
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 2.90,
Z = 3.11
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData6);
//add plate 4
IdeaRS.OpenModel.Connection.PlateData plateData4 = new IdeaRS.OpenModel.Connection.PlateData
{
Name = "P4",
Thickness = 0.02,
Id = 14,
Material = "S355",
OriginalModelId = "14",
Origin = new IdeaRS.OpenModel.Geometry3D.Point3D
{
X = -2.103,
Y = 3.12,
Z = 2.75
},
AxisX = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 1,
Y = 0,
Z = 0
},
AxisY = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = -1,
Z = 0
},
AxisZ = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 0,
Z = 1
},
Region = "M 0 0 L 0.206 0 L 0.206 0.105 L 0.195 0.115 L 0.011 0.115 L 0.0 0.105 L 0 0",
};
openModel.Connections[0].Plates.Add(plateData4);
//add weld7 between memeber 2 and plate 4 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData7 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 37,
ConnectedPartIds = new List <string>()
{
plateData4.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 3.005,
Z = 2.76
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 3.005,
Z = 2.76
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData7);
//add weld8 between memeber 2 and plate 4 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData8 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 38,
ConnectedPartIds = new List <string>()
{
plateData4.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 3.1,
Z = 2.76
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 3.1,
Z = 2.76
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData8);
//add weld9 between memeber 2 and plate 4 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData9 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 39,
ConnectedPartIds = new List <string>()
{
plateData4.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 3.1,
Z = 2.76
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 3.1,
Z = 2.76
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData9);
//add plate 5
IdeaRS.OpenModel.Connection.PlateData plateData5 = new IdeaRS.OpenModel.Connection.PlateData
{
Name = "P5",
Thickness = 0.02,
Id = 15,
Material = "S355",
OriginalModelId = "15",
Origin = new IdeaRS.OpenModel.Geometry3D.Point3D
{
X = -2.103,
Y = 3.12,
Z = 3.1
},
AxisX = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 1,
Y = 0,
Z = 0
},
AxisY = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = -1,
Z = 0
},
AxisZ = new IdeaRS.OpenModel.Geometry3D.Vector3D
{
X = 0,
Y = 0,
Z = 1
},
Region = "M 0 0 L 0.206 0 L 0.206 0.105 L 0.195 0.115 L 0.011 0.115 L 0.0 0.105 L 0 0",
};
openModel.Connections[0].Plates.Add(plateData5);
//add weld10 between memeber 2 and plate 5 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData10 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 40,
ConnectedPartIds = new List <string>()
{
plateData5.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 3.005,
Z = 3.11
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2,
Y = 3.005,
Z = 3.11
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData10);
//add weld11 between memeber 2 and plate 5 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData11 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 41,
ConnectedPartIds = new List <string>()
{
plateData5.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 3.10,
Z = 3.11
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -2.103,
Y = 3.10,
Z = 3.11
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData11);
//add weld12 between memeber 2 and plate 5 - stiffener
IdeaRS.OpenModel.Connection.WeldData weldData12 = new IdeaRS.OpenModel.Connection.WeldData()
{
Id = 46,
ConnectedPartIds = new List <string>()
{
plateData5.OriginalModelId, beam2Data.OriginalModelId
},
Start = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 3.10,
Z = 3.11
},
End = new IdeaRS.OpenModel.Geometry3D.Point3D()
{
X = -1.897,
Y = 3.10,
Z = 3.11
},
Thickness = 0.004,
WeldType = IdeaRS.OpenModel.Connection.WeldType.DoubleFillet,
};
openModel.Connections[0].Welds.Add(weldData12);
return(openModel);
}
static private OpenModel CreateConnectionGeometry(OpenModel openModel)
{
//Get geometrical point
IdeaRS.OpenModel.Geometry3D.Point3D point = openModel.Point3D.Find(p => p.Name.Equals("N2", StringComparison.InvariantCultureIgnoreCase));
//Create a new connection point
IdeaRS.OpenModel.Connection.ConnectionPoint connectionPoint = new IdeaRS.OpenModel.Connection.ConnectionPoint();
connectionPoint.Node = new ReferenceElement(point);
connectionPoint.Name = point.Name;
connectionPoint.Id = openModel.GetMaxId(connectionPoint) + 1;
//create the new connection data
var newConnectionData = new IdeaRS.OpenModel.Connection.ConnectionData();
//create list for beams
newConnectionData.Beams = new List <IdeaRS.OpenModel.Connection.BeamData>();
{
//member1D - column
var columnMember = openModel.Member1D.Find(x => x.Id == 1);
IdeaRS.OpenModel.Connection.ConnectedMember connectedColumn = new IdeaRS.OpenModel.Connection.ConnectedMember
{
Id = columnMember.Id,
MemberId = new ReferenceElement(columnMember),
IsContinuous = true,
};
connectionPoint.ConnectedMembers.Add(connectedColumn);
IdeaRS.OpenModel.Connection.BeamData columnData = new IdeaRS.OpenModel.Connection.BeamData
{
Name = "Column",
Id = 1,
OriginalModelId = columnMember.Id.ToString(),
IsAdded = false,
MirrorY = false,
RefLineInCenterOfGravity = false,
};
newConnectionData.Beams.Add(columnData);
}
{
//member1D - beam
IdeaRS.OpenModel.Connection.BeamData beamData = new IdeaRS.OpenModel.Connection.BeamData
{
Name = "Beam",
Id = 2,
OriginalModelId = "2",
IsAdded = false,
MirrorY = false,
RefLineInCenterOfGravity = false,
};
newConnectionData.Beams.Add(beamData);
var column = openModel.Member1D.Find(x => x.Id == 2);
IdeaRS.OpenModel.Connection.ConnectedMember connectedBeam = new IdeaRS.OpenModel.Connection.ConnectedMember
{
Id = column.Id,
MemberId = new ReferenceElement(column),
IsContinuous = false,
};
connectionPoint.ConnectedMembers.Add(connectedBeam);
}
openModel.Connections.Add(newConnectionData);
openModel.AddObject(connectionPoint);
return(openModel);
}