private static bool AddExtrusion(CyPhy.Extrusion extrusion, List <KeyValuePair <string, string> > featureList) // only extrusion with polygon is supported
{
if (extrusion.Children.PolygonCollection.Any())
{
CyPhy.Polygon polygon = extrusion.Children.PolygonCollection.FirstOrDefault();
if (polygon != null)
{
AddPolygon(polygon,
featureList);
List <MgaFCO> height = FindByRole((extrusion.Impl as MgaModel), "ExtrusionHeight");
if (height.Count < 1)
{
Logger.Instance.AddLogMessage(String.Format("Extrusion geometry must contain exactly 1 ExtrusionHeight point: {0}", extrusion.ToHyperLink()), Severity.Error);
return(false);
}
CyPhy.Point offset = CyPhyClasses.Point.Cast(height[0]);
if (CreateFeatureFromPoint(offset,
featureList))
{
return(true);
}
else
{
Logger.Instance.AddLogMessage(String.Format("Extrusion geometry's ExtrusionHeight must connect to a Point datum inside a CADModel: {0}", extrusion.ToHyperLink()), Severity.Error);
return(false);
}
}
}
return(false);
}
private void TraverseComposites(CyPhy.Component component)
{
foreach (var material in component.Children.MaterialContentsCollection)
{
CAD.ElementType cadElement = new CAD.ElementType()
{
_id = UtilityHelpers.MakeUdmID(),
ElementType1 = "SURFACE"
};
MgaModel materialMga = material.Impl as MgaModel;
List <MgaFCO> startDirPts = new List <MgaFCO>();
List <MgaFCO> endDirPts = new List <MgaFCO>();
startDirPts = CyPhy2CAD_CSharp.DataRep.CADGeometry.FindByRole(materialMga, "Start_Direction");
endDirPts = CyPhy2CAD_CSharp.DataRep.CADGeometry.FindByRole(materialMga, "End_Direction");
if (startDirPts.Count != 1 && endDirPts.Count != 1)
{
Logger.Instance.AddLogMessage("Material Content must contain one Start_Direction and one End_Direction point.", Severity.Warning);
continue;
}
CyPhy.Point startDirPt = CyPhyClasses.Point.Cast(startDirPts[0]);
string startDirPtDatumName = GetFeatureName(startDirPt);
CyPhy.Point endDirPt = CyPhyClasses.Point.Cast(endDirPts[0]);
string endDirPtDatumName = GetFeatureName(endDirPt);
CAD.OrientationType cadOrientation = new CAD.OrientationType()
{
_id = UtilityHelpers.MakeUdmID()
};
CAD.GeometryType cadGeometry = new CAD.GeometryType()
{
_id = UtilityHelpers.MakeUdmID()
};
CAD.FeatureType cadStartFeature = new CAD.FeatureType()
{
_id = UtilityHelpers.MakeUdmID(),
ComponentID = DisplayID,
Name = startDirPtDatumName,
MetricID = DisplayID + ":" + startDirPtDatumName
};
TestBenchModel.TBComputation startFeatureComputation = new TestBenchModel.TBComputation()
{
ComponentID = DisplayID,
ComputationType = TestBenchModel.TBComputation.Type.POINTCOORDINATES,
Details = startDirPtDatumName,
FeatureDatumName = startDirPtDatumName,
MetricID = DisplayID + ":" + startDirPtDatumName,
RequestedValueType = "Vector"
};
pointCoordinatesList.Add(startFeatureComputation);
if (String.IsNullOrEmpty(startDirPtDatumName))
{
Logger.Instance.AddLogMessage("Empty point datum name [" + startDirPt.Path + "]", Severity.Warning);
}
CAD.FeatureType cadEndFeature = new CAD.FeatureType()
{
_id = UtilityHelpers.MakeUdmID(),
ComponentID = DisplayID,
Name = endDirPtDatumName,
MetricID = DisplayID + ":" + endDirPtDatumName
};
TestBenchModel.TBComputation endFeatureComputation = new TestBenchModel.TBComputation()
{
ComponentID = DisplayID,
ComputationType = TestBenchModel.TBComputation.Type.POINTCOORDINATES,
Details = endDirPtDatumName,
FeatureDatumName = endDirPtDatumName,
MetricID = DisplayID + ":" + endDirPtDatumName,
RequestedValueType = "Vector"
};
pointCoordinatesList.Add(endFeatureComputation);
if (String.IsNullOrEmpty(endDirPtDatumName))
{
Logger.Instance.AddLogMessage("Empty point datum name [" + endDirPt.Path + "]", Severity.Warning);
}
CAD.FeaturesType cadFeatures = new CAD.FeaturesType()
{
_id = UtilityHelpers.MakeUdmID(),
FeatureID = material.ID,
GeometryType = "Vector",
FeatureInterfaceType = "CAD_DATUM",
FeatureGeometryType = "POINT",
PrimaryGeometryQualifier = "",
SecondaryGeometryQualifier = ""
};
cadFeatures.Feature = new CAD.FeatureType[2];
cadFeatures.Feature[0] = cadStartFeature;
cadFeatures.Feature[1] = cadEndFeature;
cadGeometry.Features = new CAD.FeaturesType[1];
cadGeometry.Features[0] = cadFeatures;
cadOrientation.Geometry = cadGeometry;
// Material Layups
CAD.MaterialLayupType cadLayers = new CAD.MaterialLayupType()
{
_id = UtilityHelpers.MakeUdmID(),
Position = material.Attributes.Position.ToString().ToUpper(),
Offset = (material.Attributes.Position.ToString().ToUpper() != "OFFSET_BY_VALUE") ? 0 : (material.Attributes.PositionOffset),
Direction = material.Attributes.MaterialLayupDirection.ToString().ToUpper()
};
int layerCnt = material.Children.MaterialLayerCollection.Count();
if (layerCnt > 0)
{
cadLayers.Layer = new CAD.LayerType[layerCnt];
int k = 0;
foreach (var layer in material.Children.MaterialLayerCollection.OrderBy(i => i.Attributes.LayerID))
{
CAD.LayerType cadLayer = new CAD.LayerType()
{
_id = UtilityHelpers.MakeUdmID(),
ID = layer.Attributes.LayerID,
Drop_Order = layer.Attributes.DropOrder,
Material_Name = layer.Attributes.LayerMaterial,
Orientation = layer.Attributes.LayerOrientation,
Thickness = layer.Attributes.LayerThickness
};
cadLayers.Layer[k] = cadLayer;
k++;
}
}
CAD.ElementContentsType cadElementContents = new CAD.ElementContentsType();
cadElementContents._id = UtilityHelpers.MakeUdmID();
cadElementContents.Orientation = cadOrientation;
cadElementContents.MaterialLayup = cadLayers;
cadElement.ElementContents = cadElementContents;
if (material.DstConnections.ContentsToGeometryCollection.Count() < 1 || material.DstConnections.ContentsToGeometryCollection.Count() > 1)
{
Logger.Instance.AddLogMessage("Material Content need to connect to one Face geometry.", Severity.Warning);
continue;
}
// Face, Polygon, or Extrusion Geometry
CyPhy.ContentsToGeometry conn = material.DstConnections.ContentsToGeometryCollection.FirstOrDefault();
if (conn != null)
{
CyPhy.Face faceGeometry = conn.DstEnds.Face;
CyPhy.Polygon polgonGeometry = conn.DstEnds.Polygon;
CyPhy.Extrusion extrusionGeometry = conn.DstEnds.Extrusion;
int countGeometryTypes = 0;
if (faceGeometry != null)
{
++countGeometryTypes;
}
if (polgonGeometry != null)
{
++countGeometryTypes;
}
if (extrusionGeometry != null)
{
++countGeometryTypes;
}
if (countGeometryTypes != 1)
{
Logger.Instance.AddLogMessage("MaterialContents must be connected to one and only one geometry type (i.e. FACE, POLOGON, or EXTRUSION).", Severity.Warning);
continue;
}
// Approach when only FACE was supported
//String primBoundaryQ = faceGeometry.Attributes.BoundaryQualifier.ToString().Replace("_", string.Empty);
//MgaModel faceMga = faceGeometry.Impl as MgaModel;
//List<MgaFCO> normalDirPts = new List<MgaFCO>();
//normalDirPts = CyPhy2CAD_CSharp.DataRep.CADGeometry.FindByRole(faceMga, "Direction_Reference_Point");
String primBoundaryQ = "";
MgaModel faceMga;
List <MgaFCO> normalDirPts = new List <MgaFCO>();
if (faceGeometry != null)
{
primBoundaryQ = faceGeometry.Attributes.BoundaryQualifier.ToString().Replace("_", string.Empty);
faceMga = faceGeometry.Impl as MgaModel;
normalDirPts = CyPhy2CAD_CSharp.DataRep.CADGeometry.FindByRole(faceMga, "Direction_Reference_Point");
}
else if (polgonGeometry != null)
{
primBoundaryQ = polgonGeometry.Attributes.BoundaryQualifier.ToString().Replace("_", string.Empty);
faceMga = polgonGeometry.Impl as MgaModel;
normalDirPts = CyPhy2CAD_CSharp.DataRep.CADGeometry.FindByRole(faceMga, "Direction_Reference_Point");
}
else if (extrusionGeometry != null)
{
primBoundaryQ = extrusionGeometry.Attributes.BoundaryQualifier.ToString().Replace("_", string.Empty);
faceMga = extrusionGeometry.Impl as MgaModel;
normalDirPts = CyPhy2CAD_CSharp.DataRep.CADGeometry.FindByRole(faceMga, "Direction_Reference_Point");
}
if (normalDirPts.Count != 1)
{
Logger.Instance.AddLogMessage("Geometry (FACE, POLYGON, or EXTRUSION) can contain only one Direction_Reference_Point point.", Severity.Warning);
continue;
}
CyPhy.Point normalDirPt = CyPhyClasses.Point.Cast(normalDirPts.FirstOrDefault());
string normalPtFeatureName = GetFeatureName(normalDirPt);
if (String.IsNullOrEmpty(normalPtFeatureName))
{
Logger.Instance.AddLogMessage("Direction_Reference_Point point of the Face/Ploygon/Extrusion geometry doesn't have a datum name. Make sure it is connected to a valid point inside a CADModel.", Severity.Warning);
continue;
}
CyPhy2CAD_CSharp.DataRep.CADGeometry faceOrExtruOrPolyGeometryRep = null;
if (faceGeometry != null)
{
faceOrExtruOrPolyGeometryRep = CyPhy2CAD_CSharp.DataRep.CADGeometry.CreateGeometry(faceGeometry);
if (faceOrExtruOrPolyGeometryRep == null)
{
Logger.Instance.AddLogMessage("Unsuccessfully created a representation of a Face Geometry.", Severity.Warning);
continue;
}
}
else if (polgonGeometry != null)
{
faceOrExtruOrPolyGeometryRep = CyPhy2CAD_CSharp.DataRep.CADGeometry.CreateGeometry(polgonGeometry);
if (faceOrExtruOrPolyGeometryRep == null)
{
Logger.Instance.AddLogMessage("Unsuccessfully created a representation of a Polygon Geometry.", Severity.Warning);
continue;
}
}
else if (extrusionGeometry != null)
{
faceOrExtruOrPolyGeometryRep = CyPhy2CAD_CSharp.DataRep.CADGeometry.CreateGeometry(extrusionGeometry);
if (faceOrExtruOrPolyGeometryRep == null)
{
Logger.Instance.AddLogMessage("Unsuccessfully created a representation of a Extrusion Geometry.", Severity.Warning);
continue;
}
}
// Element/Geometry
CAD.GeometryType cadFaceOrExtruOrPolyGeometryOut = faceOrExtruOrPolyGeometryRep.ToCADXMLOutput();
if (cadFaceOrExtruOrPolyGeometryOut == null)
{
Logger.Instance.AddLogMessage("Unsuccessfully converted a representation of a Face/Ploygon/Extrusion Geometry to CAD xml.", Severity.Warning);
continue;
}
cadElement.Geometry = cadFaceOrExtruOrPolyGeometryOut;
foreach (var faceOrExtruOrPolyGeomFeatures in cadFaceOrExtruOrPolyGeometryOut.Features)
{
foreach (var feature_temp in faceOrExtruOrPolyGeomFeatures.Feature)
{
TestBenchModel.TBComputation faceGeometryComputation = new TestBenchModel.TBComputation()
{
ComponentID = DisplayID,
ComputationType = TestBenchModel.TBComputation.Type.POINTCOORDINATES,
Details = feature_temp.Name,
FeatureDatumName = feature_temp.Name,
MetricID = feature_temp.MetricID,
RequestedValueType = "Vector"
};
pointCoordinatesList.Add(faceGeometryComputation);
}
}
// Element/Geometry
string direction_temp = "";
if (faceGeometry != null)
{
direction_temp = (faceGeometry.Attributes.NormalDirection == CyPhyClasses.Face.AttributesClass.NormalDirection_enum.Toward_Reference_Point) ? "TOWARD" : "AWAY";
}
else if (polgonGeometry != null)
{
direction_temp = (polgonGeometry.Attributes.NormalDirection == CyPhyClasses.Polygon.AttributesClass.NormalDirection_enum.Toward_Reference_Point) ? "TOWARD" : "AWAY";
}
else if (extrusionGeometry != null)
{
direction_temp = (extrusionGeometry.Attributes.NormalDirection == CyPhyClasses.Extrusion.AttributesClass.NormalDirection_enum.Toward_Reference_Point) ? "TOWARD" : "AWAY";
}
CAD.SurfaceNormalType cadSurfaceNormal = new CAD.SurfaceNormalType()
{
_id = UtilityHelpers.MakeUdmID(),
Direction = direction_temp
};
CAD.FeaturesType cadSurfaceNormFeatures = new CAD.FeaturesType()
{
_id = UtilityHelpers.MakeUdmID(),
FeatureID = normalDirPt.ID,
GeometryType = "POINT",
FeatureInterfaceType = "CAD_DATUM",
FeatureGeometryType = "POINT",
Feature = new CAD.FeatureType[1],
PrimaryGeometryQualifier = primBoundaryQ,
SecondaryGeometryQualifier = ""
};
cadSurfaceNormFeatures.Feature[0] = new CAD.FeatureType()
{
_id = UtilityHelpers.MakeUdmID(),
Name = normalPtFeatureName,
ComponentID = DisplayID,
MetricID = DisplayID + ":" + normalPtFeatureName
};
TestBenchModel.TBComputation surfNormalComputation = new TestBenchModel.TBComputation()
{
ComponentID = DisplayID,
ComputationType = TestBenchModel.TBComputation.Type.POINTCOORDINATES,
Details = normalPtFeatureName,
FeatureDatumName = normalPtFeatureName,
MetricID = DisplayID + ":" + normalPtFeatureName,
RequestedValueType = "Vector"
};
pointCoordinatesList.Add(surfNormalComputation);
if (String.IsNullOrEmpty(normalPtFeatureName))
{
Logger.Instance.AddLogMessage("Empty point datum name [" + normalDirPt.Path + "]", Severity.Warning);
}
CAD.GeometryType cadSurfaceNormGeom = new CAD.GeometryType()
{
_id = UtilityHelpers.MakeUdmID(),
Features = new CAD.FeaturesType[1],
};
cadSurfaceNormGeom.Features[0] = cadSurfaceNormFeatures;
cadSurfaceNormal.Geometry = cadSurfaceNormGeom;
cadElement.SurfaceNormal = cadSurfaceNormal;
}
this.CadElementsList.Add(cadElement);
}
}
public static CADGeometry CreateGeometry(CyPhy.GeometryTypes geometryBase)
{
List <KeyValuePair <string, string> > featureList = new List <KeyValuePair <string, string> >();
string geometryType = geometryBase.Kind;
CADGeometry geometryRep = new CADGeometry
{
FeatureID = geometryBase.ID,
GeometryType = geometryType.ToUpper(),
PrimaryQualifier = geometryBase.Attributes.BoundaryQualifier.ToString().Replace("_", string.Empty)
};
if (geometryType == "Sphere")
{
CyPhy.Sphere sphere = CyPhyClasses.Sphere.Cast(geometryBase.Impl);
if (AddSphere(sphere, featureList))
{
geometryRep.CreateGeometryFeature(featureList);
}
else
{
geometryRep = null;
}
}
else if (geometryType == "Cylinder")
{
CyPhy.Cylinder cylinder = CyPhyClasses.Cylinder.Cast(geometryBase.Impl);
geometryRep.SecondaryQualifier = cylinder.Attributes.EndCapInclusionQualifier.ToString();
if (AddCylinder(cylinder, featureList))
{
geometryRep.CreateGeometryFeature(featureList);
}
else
{
geometryRep = null;
}
}
else if (geometryType == "Extrusion")
{
CyPhy.Extrusion extrusion = CyPhyClasses.Extrusion.Cast(geometryBase.Impl);
if (AddExtrusion(extrusion, featureList))
{
geometryRep.CreateGeometryFeature(featureList);
}
else
{
geometryRep = null;
}
}
else if (geometryType == "Polygon")
{
CyPhy.Polygon polygon = CyPhyClasses.Polygon.Cast(geometryBase.Impl);
if (AddPolygon(polygon, featureList))
{
geometryRep.CreateGeometryFeature(featureList);
}
else
{
geometryRep = null;
}
}
else if (geometryType == "Circle")
{
CyPhy.Circle circle = CyPhyClasses.Circle.Cast(geometryBase.Impl);
if (AddCircle(circle, featureList))
{
geometryRep.CreateGeometryFeature(featureList);
}
else
{
geometryRep = null;
}
}
else if (geometryType == "Face")
{
CyPhy.Face face = CyPhyClasses.Face.Cast(geometryBase.Impl);
CADGeometry.FeatureTypeEnum type;
if (AddFace(face,
featureList,
out type))
{
geometryRep.featureType = type;
geometryRep.CreateGeometryFeature(featureList);
}
else
{
geometryRep = null;
}
}
else
{
Logger.Instance.AddLogMessage("Geometry shape not supported [" + geometryType + "]", Severity.Warning);
geometryRep = null;
}
return(geometryRep);
}