public void Run()
{
Paramètres param = new Paramètres();
Console.WriteLine("Quelle est la taille du tampon à utiliser de chaque côté du support de transmission?");
bool entreeCorrecte = false;
while (!entreeCorrecte)
{
try
{
param.tailleTampon = Convert.ToUInt16(Console.ReadLine());
entreeCorrecte = true;
}
catch (InvalidCastException)
{
Console.WriteLine("La valeur entrée n'est pas un entier; svp réessayer :");
}
}
Console.WriteLine("Quel est le délais de temporisation des trames?");
entreeCorrecte = false;
while (!entreeCorrecte)
{
try
{
param.delaisTemporisation = Convert.ToUInt16(Console.ReadLine());
entreeCorrecte = true;
}
catch (InvalidCastException)
{
Console.WriteLine("La valeur entrée n'est pas un entier; svp réessayer :");
}
}
Console.WriteLine("Quel est l'emplacement du fichier à copier?");
param.emplacementACopier = Console.ReadLine();
Console.WriteLine("Quel est l'emplacemenet pour la copie du fichier?");
param.emplacementCopie = Console.ReadLine();
tramesA1_A2 = new BlockingCollection <Trame>();
tramesA2_A1 = new BlockingCollection <Trame>();
tramesA_C = new BlockingCollection <Trame>();
tramesC_A = new BlockingCollection <Trame>();
tramesB_C = new BlockingCollection <Trame>();
tramesC_B = new BlockingCollection <Trame>();
tramesB1_B2 = new BlockingCollection <Trame>();
tramesB2_B1 = new BlockingCollection <Trame>();
A1 = new CoucheLLC(g_signal);
A2 = new CoucheMAC(g_signal, A1);
B1 = new CoucheLLC(g_signal);
B2 = new CoucheMAC(g_signal, B1);
C = new CouchePhysique(g_signal, A2, B2);
Thread threadA1 = new Thread(A1.Run);
Thread threadA2 = new Thread(A2.Run);
Thread threadB1 = new Thread(B1.Run);
Thread threadB2 = new Thread(B2.Run);
Thread threadC = new Thread(C.Run);
try
{
threadA1.Start();
threadA2.Start();
threadB1.Start();
threadB1.Start();
threadC.Start();
}
finally
{
threadA1.Join();
threadA2.Join();
threadB1.Join();
threadB1.Join();
threadC.Join();
}
}
public void Run()
{
Paramètres param = new Paramètres();
//TO DO - removes the debug options - see cmts below
Console.WriteLine("Quelle est la taille du tampon à utiliser de chaque côté du support de transmission?");
bool entreeCorrecte = false;
//TO DO: uncommment real code below, comment DEBUG instead
//#########################DEBUG################
param.tailleTampon = Convert.ToUInt16(10);
entreeCorrecte = true;
//#########################DEBUG################
//while (!entreeCorrecte)
//{
// try
// {
// param.tailleTampon = Convert.ToUInt16(Console.ReadLine());
// entreeCorrecte = true;
// }
// catch (InvalidCastException)
// {
// Console.WriteLine("La valeur entrée n'est pas un entier; svp réessayer :");
// }
//}
Console.WriteLine("Quel est le délais de temporisation des trames?");
entreeCorrecte = false;
//TO DO: uncommment real code below, comment DEBUG instead
//#########################DEBUG################
param.delaisTemporisation = Convert.ToUInt16(10);
entreeCorrecte = true;
//#########################DEBUG################
//while (!entreeCorrecte)
//{
// try
// {
// param.delaisTemporisation = Convert.ToUInt16(Console.ReadLine());
// entreeCorrecte = true;
// }
// catch (InvalidCastException)
// {
// Console.WriteLine("La valeur entrée n'est pas un entier; svp réessayer :");
// }
//}
//TO DO: uncommment real code below, comment DEBUG instead
//#########################DEBUG################
Console.WriteLine(@"Fichier input: utilise U:\hiver2018\ift585\tp1_liaison\source\t");
param.emplacementACopier = @"U:\hiver2018\ift585\tp1_liaison\source\t";
//#########################DEBUG################
//Console.WriteLine("Quel est l'emplacement du fichier à copier?");
//param.emplacementACopier = Console.ReadLine();
//TO DO: uncommment real code below, comment DEBUG instead
//#########################DEBUG################
Console.WriteLine(@"Fichier output: utilise U:\hiver2018\ift585\tp1_liaison\source\t");
param.emplacementCopie = @"U:\hiver2018\ift585\tp1_liaison\dest\t";;
//#########################DEBUG################
//Console.WriteLine("Quel est l'emplacemenet pour la copie du fichier?");
//param.emplacementCopie = Console.ReadLine();
//Easiser to follow stuff than on console
Logging.createLogFile();
//I'm not sure we need one collection all the collections?
tramesA1_A2 = new BlockingCollection <Trame>();
tramesA2_A1 = new BlockingCollection <Trame>();
tramesA_C = new BlockingCollection <Trame>();
tramesC_A = new BlockingCollection <Trame>();
tramesB_C = new BlockingCollection <Trame>();
tramesC_B = new BlockingCollection <Trame>();
tramesB1_B2 = new BlockingCollection <Trame>();
tramesB2_B1 = new BlockingCollection <Trame>();
all_trame_collections.Add(tramesA1_A2);
all_trame_collections.Add(tramesA2_A1);
all_trame_collections.Add(tramesA_C);
all_trame_collections.Add(tramesC_A);
all_trame_collections.Add(tramesB_C);
all_trame_collections.Add(tramesC_B);
all_trame_collections.Add(tramesB1_B2);
all_trame_collections.Add(tramesB2_B1);
A1 = new CoucheLLC(g_signal);
A2 = new CoucheMAC(g_signal, A1);
B1 = new CoucheLLC(g_signal);
B2 = new CoucheMAC(g_signal, B1);
C = new CouchePhysique(g_signal, A2, B2);
/*init A1, B1. This creates their CoucheReseau essentially. Let's suppose A1 sends (is_receiving=false) and B1 receives...*/
A1.Initialiser(param.emplacementACopier, is_active: false);
B1.Initialiser(param.emplacementCopie, is_active: true);
Thread threadA1 = new Thread(A1.Run);
Thread threadA2 = new Thread(A2.Run);
Thread threadB1 = new Thread(B1.Run);
Thread threadB2 = new Thread(B2.Run);
Thread threadC = new Thread(C.Run);
//easier to debug
threadA1.Name = "A1_LLC";
threadA2.Name = "A2_MAC";
threadB1.Name = "B1_LLC";
threadB2.Name = "B2_MAC";
threadC.Name = "C_PHYS";
all_threads.Add(threadA1);
all_threads.Add(threadA2);
all_threads.Add(threadB1);
all_threads.Add(threadB2);
all_threads.Add(threadC);
try
{
/*MS documentation directly: Causes the operating system to change the state of
* the current instance to ThreadState.Running, and optionally supplies an object
* containing data to be used by the method the thread executes.*/
//Apparently you can pass arguments to the threads through Start()
threadA1.Start();
threadA2.Start();
threadB1.Start();
threadB2.Start();
threadC.Start();
}
finally
{
threadA1.Join();
threadA2.Join();
threadB1.Join();
threadB2.Join();
threadC.Join();
}
}
