public void DecodeZigZag32()
{
Assert.AreEqual(0, ParsingPrimitives.DecodeZigZag32(0));
Assert.AreEqual(-1, ParsingPrimitives.DecodeZigZag32(1));
Assert.AreEqual(1, ParsingPrimitives.DecodeZigZag32(2));
Assert.AreEqual(-2, ParsingPrimitives.DecodeZigZag32(3));
Assert.AreEqual(0x3FFFFFFF, ParsingPrimitives.DecodeZigZag32(0x7FFFFFFE));
Assert.AreEqual(unchecked ((int)0xC0000000), ParsingPrimitives.DecodeZigZag32(0x7FFFFFFF));
Assert.AreEqual(0x7FFFFFFF, ParsingPrimitives.DecodeZigZag32(0xFFFFFFFE));
Assert.AreEqual(unchecked ((int)0x80000000), ParsingPrimitives.DecodeZigZag32(0xFFFFFFFF));
}
/// <summary>
/// Parses the next tag.
/// If the end of logical stream was reached, an invalid tag of 0 is returned.
/// </summary>
public static uint ParseTag(ref ReadOnlySpan <byte> buffer, ref ParserInternalState state)
{
// The "nextTag" logic is there only as an optimization for reading non-packed repeated / map
// fields and is strictly speaking not necessary.
// TODO(jtattermusch): look into simplifying the ParseTag logic.
if (state.hasNextTag)
{
state.lastTag = state.nextTag;
state.hasNextTag = false;
return(state.lastTag);
}
// Optimize for the incredibly common case of having at least two bytes left in the buffer,
// and those two bytes being enough to get the tag. This will be true for fields up to 4095.
if (state.bufferPos + 2 <= state.bufferSize)
{
int tmp = buffer[state.bufferPos++];
if (tmp < 128)
{
state.lastTag = (uint)tmp;
}
else
{
int result = tmp & 0x7f;
if ((tmp = buffer[state.bufferPos++]) < 128)
{
result |= tmp << 7;
state.lastTag = (uint)result;
}
else
{
// Nope, rewind and go the potentially slow route.
state.bufferPos -= 2;
state.lastTag = ParsingPrimitives.ParseRawVarint32(ref buffer, ref state);
}
}
}
else
{
if (SegmentedBufferHelper.IsAtEnd(ref buffer, ref state))
{
state.lastTag = 0;
return(0);
}
state.lastTag = ParsingPrimitives.ParseRawVarint32(ref buffer, ref state);
}
if (WireFormat.GetTagFieldNumber(state.lastTag) == 0)
{
// If we actually read a tag with a field of 0, that's not a valid tag.
throw InvalidProtocolBufferException.InvalidTag();
}
return(state.lastTag);
}
public void RoundTripZigZag64()
{
Assert.AreEqual(0, ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(0)));
Assert.AreEqual(1, ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(1)));
Assert.AreEqual(-1, ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(-1)));
Assert.AreEqual(14927, ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(14927)));
Assert.AreEqual(-3612, ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(-3612)));
Assert.AreEqual(856912304801416L,
ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(856912304801416L)));
Assert.AreEqual(-75123905439571256L,
ParsingPrimitives.DecodeZigZag64(WritingPrimitives.EncodeZigZag64(-75123905439571256L)));
}
public void DecodeZigZag64()
{
Assert.AreEqual(0, ParsingPrimitives.DecodeZigZag64(0));
Assert.AreEqual(-1, ParsingPrimitives.DecodeZigZag64(1));
Assert.AreEqual(1, ParsingPrimitives.DecodeZigZag64(2));
Assert.AreEqual(-2, ParsingPrimitives.DecodeZigZag64(3));
Assert.AreEqual(0x000000003FFFFFFFL, ParsingPrimitives.DecodeZigZag64(0x000000007FFFFFFEL));
Assert.AreEqual(unchecked ((long)0xFFFFFFFFC0000000L), ParsingPrimitives.DecodeZigZag64(0x000000007FFFFFFFL));
Assert.AreEqual(0x000000007FFFFFFFL, ParsingPrimitives.DecodeZigZag64(0x00000000FFFFFFFEL));
Assert.AreEqual(unchecked ((long)0xFFFFFFFF80000000L), ParsingPrimitives.DecodeZigZag64(0x00000000FFFFFFFFL));
Assert.AreEqual(0x7FFFFFFFFFFFFFFFL, ParsingPrimitives.DecodeZigZag64(0xFFFFFFFFFFFFFFFEL));
Assert.AreEqual(unchecked ((long)0x8000000000000000L), ParsingPrimitives.DecodeZigZag64(0xFFFFFFFFFFFFFFFFL));
}
internal static uint?ReadUInt32Wrapper(ref ReadOnlySpan <byte> buffer, ref ParserInternalState state)
{
// field=1, type=varint = tag of 8
const int expectedTag = 8;
// length:1 + tag:1 + value:10(varint64-max) = 12 bytes
// Value can be 64 bits for negative integers
if (state.bufferPos + 12 <= state.bufferSize)
{
// The entire wrapper message is already contained in `buffer`.
int pos0 = state.bufferPos;
int length = buffer[state.bufferPos++];
if (length == 0)
{
return(0);
}
// Length will always fit in a single byte.
if (length >= 128)
{
state.bufferPos = pos0;
return(ReadUInt32WrapperSlow(ref buffer, ref state));
}
int finalBufferPos = state.bufferPos + length;
if (buffer[state.bufferPos++] != expectedTag)
{
state.bufferPos = pos0;
return(ReadUInt32WrapperSlow(ref buffer, ref state));
}
var result = ParsingPrimitives.ParseRawVarint32(ref buffer, ref state);
// Verify this message only contained a single field.
if (state.bufferPos != finalBufferPos)
{
state.bufferPos = pos0;
return(ReadUInt32WrapperSlow(ref buffer, ref state));
}
return(result);
}
else
{
return(ReadUInt32WrapperSlow(ref buffer, ref state));
}
}
public static void ReadMessage(ref ParseContext ctx, IMessage message)
{
int length = ParsingPrimitives.ParseLength(ref ctx.buffer, ref ctx.state);
if (ctx.state.recursionDepth >= ctx.state.recursionLimit)
{
throw InvalidProtocolBufferException.RecursionLimitExceeded();
}
int oldLimit = SegmentedBufferHelper.PushLimit(ref ctx.state, length);
++ctx.state.recursionDepth;
ReadRawMessage(ref ctx, message);
CheckReadEndOfStreamTag(ref ctx.state);
// Check that we've read exactly as much data as expected.
if (!SegmentedBufferHelper.IsReachedLimit(ref ctx.state))
{
throw InvalidProtocolBufferException.TruncatedMessage();
}
--ctx.state.recursionDepth;
SegmentedBufferHelper.PopLimit(ref ctx.state, oldLimit);
}
/// <summary>
/// Skip a group.
/// </summary>
public static void SkipGroup(ref ReadOnlySpan <byte> buffer, ref ParserInternalState state, uint startGroupTag)
{
// Note: Currently we expect this to be the way that groups are read. We could put the recursion
// depth changes into the ReadTag method instead, potentially...
state.recursionDepth++;
if (state.recursionDepth >= state.recursionLimit)
{
throw InvalidProtocolBufferException.RecursionLimitExceeded();
}
uint tag;
while (true)
{
tag = ParsingPrimitives.ParseTag(ref buffer, ref state);
if (tag == 0)
{
throw InvalidProtocolBufferException.TruncatedMessage();
}
// Can't call SkipLastField for this case- that would throw.
if (WireFormat.GetTagWireType(tag) == WireFormat.WireType.EndGroup)
{
break;
}
// This recursion will allow us to handle nested groups.
SkipLastField(ref buffer, ref state);
}
int startField = WireFormat.GetTagFieldNumber(startGroupTag);
int endField = WireFormat.GetTagFieldNumber(tag);
if (startField != endField)
{
throw new InvalidProtocolBufferException(
$"Mismatched end-group tag. Started with field {startField}; ended with field {endField}");
}
state.recursionDepth--;
}
/// <summary>
/// Reads an sint32 field value from the stream.
/// </summary>
public int ReadSInt32()
{
return(ParsingPrimitives.DecodeZigZag32(ReadRawVarint32()));
}
/// <summary>
/// Reads a bytes field value from the stream.
/// </summary>
public ByteString ReadBytes()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ReadBytes(ref span, ref state));
}
/// <summary>
/// Reads a float field from the stream.
/// </summary>
public float ReadFloat()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ParseFloat(ref span, ref state));
}
public uint ReadUInt32()
{
return(ParsingPrimitives.ParseRawVarint32(ref buffer, ref state));
}
public int ReadSFixed32()
{
return((int)ParsingPrimitives.ParseRawLittleEndian32(ref buffer, ref state));
}
/// <summary>
/// Reads a varint from the input one byte at a time, so that it does not
/// read any bytes after the end of the varint. If you simply wrapped the
/// stream in a CodedInputStream and used ReadRawVarint32(Stream)
/// then you would probably end up reading past the end of the varint since
/// CodedInputStream buffers its input.
/// </summary>
/// <param name="input"></param>
/// <returns></returns>
internal static uint ReadRawVarint32(Stream input)
{
return(ParsingPrimitives.ReadRawVarint32(input));
}
/// <summary>
/// Peeks at the next tag in the stream. If it matches <paramref name="tag"/>,
/// the tag is consumed and the method returns <c>true</c>; otherwise, the
/// stream is left in the original position and the method returns <c>false</c>.
/// </summary>
public bool MaybeConsumeTag(uint tag)
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.MaybeConsumeTag(ref span, ref state, tag));
}
public static KeyValuePair <TKey, TValue> ReadMapEntry <TKey, TValue>(ref ParseContext ctx, MapField <TKey, TValue> .Codec codec)
{
int length = ParsingPrimitives.ParseLength(ref ctx.buffer, ref ctx.state);
if (ctx.state.recursionDepth >= ctx.state.recursionLimit)
{
throw InvalidProtocolBufferException.RecursionLimitExceeded();
}
int oldLimit = SegmentedBufferHelper.PushLimit(ref ctx.state, length);
++ctx.state.recursionDepth;
TKey key = codec.KeyCodec.DefaultValue;
TValue value = codec.ValueCodec.DefaultValue;
uint tag;
while ((tag = ctx.ReadTag()) != 0)
{
if (tag == codec.KeyCodec.Tag)
{
key = codec.KeyCodec.Read(ref ctx);
}
else if (tag == codec.ValueCodec.Tag)
{
value = codec.ValueCodec.Read(ref ctx);
}
else
{
SkipLastField(ref ctx.buffer, ref ctx.state);
}
}
// Corner case: a map entry with a key but no value, where the value type is a message.
// Read it as if we'd seen input with no data (i.e. create a "default" message).
if (value == null)
{
if (ctx.state.CodedInputStream != null)
{
// the decoded message might not support parsing from ParseContext, so
// we need to allow fallback to the legacy MergeFrom(CodedInputStream) parsing.
value = codec.ValueCodec.Read(new CodedInputStream(ZeroLengthMessageStreamData));
}
else
{
ParseContext.Initialize(new ReadOnlySequence <byte>(ZeroLengthMessageStreamData), out ParseContext zeroLengthCtx);
value = codec.ValueCodec.Read(ref zeroLengthCtx);
}
}
CheckReadEndOfStreamTag(ref ctx.state);
// Check that we've read exactly as much data as expected.
if (!SegmentedBufferHelper.IsReachedLimit(ref ctx.state))
{
throw InvalidProtocolBufferException.TruncatedMessage();
}
--ctx.state.recursionDepth;
SegmentedBufferHelper.PopLimit(ref ctx.state, oldLimit);
return(new KeyValuePair <TKey, TValue>(key, value));
}
public int ReadLength()
{
return((int)ParsingPrimitives.ParseRawVarint32(ref buffer, ref state));
}
public long ReadSInt64()
{
return(ParsingPrimitives.DecodeZigZag64(ParsingPrimitives.ParseRawVarint64(ref buffer, ref state)));
}
public int ReadSInt32()
{
return(ParsingPrimitives.DecodeZigZag32(ParsingPrimitives.ParseRawVarint32(ref buffer, ref state)));
}
public long ReadSFixed64()
{
return((long)ParsingPrimitives.ParseRawLittleEndian64(ref buffer, ref state));
}
/// <summary>
/// Reads an sint64 field value from the stream.
/// </summary>
public long ReadSInt64()
{
return(ParsingPrimitives.DecodeZigZag64(ReadRawVarint64()));
}
/// <summary>
/// Reads a length for length-delimited data.
/// </summary>
/// <remarks>
/// This is internally just reading a varint, but this method exists
/// to make the calling code clearer.
/// </remarks>
public int ReadLength()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ParseLength(ref span, ref state));
}
/// <summary>
/// Reads a fixed size of bytes from the input.
/// </summary>
/// <exception cref="InvalidProtocolBufferException">
/// the end of the stream or the current limit was reached
/// </exception>
internal byte[] ReadRawBytes(int size)
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ReadRawBytes(ref span, ref state, size));
}
/// <summary>
/// Reads a raw Varint from the stream. If larger than 32 bits, discard the upper bits.
/// This method is optimised for the case where we've got lots of data in the buffer.
/// That means we can check the size just once, then just read directly from the buffer
/// without constant rechecking of the buffer length.
/// </summary>
internal uint ReadRawVarint32()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ParseRawVarint32(ref span, ref state));
}
public static ByteString ReadBytes(ref ReadOnlySpan <byte> buffer, ref ParserInternalState state)
{
int length = ParsingPrimitives.ParseLength(ref buffer, ref state);
return(ByteString.AttachBytes(ParsingPrimitives.ReadRawBytes(ref buffer, ref state, length)));
}
/// <summary>
/// Reads a 64-bit little-endian integer from the stream.
/// </summary>
internal ulong ReadRawLittleEndian64()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ParseRawLittleEndian64(ref span, ref state));
}
public int ReadEnum()
{
// Currently just a pass-through, but it's nice to separate it logically from WriteInt32.
return((int)ParsingPrimitives.ParseRawVarint32(ref buffer, ref state));
}
public static string ReadString(ref ReadOnlySpan <byte> buffer, ref ParserInternalState state)
{
int length = ParsingPrimitives.ParseLength(ref buffer, ref state);
return(ParsingPrimitives.ReadRawString(ref buffer, ref state, length));
}
/// <summary>
/// Reads a double field from the stream.
/// </summary>
public double ReadDouble()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ParseDouble(ref span, ref state));
}
/// <summary>
/// Reads a field tag, returning the tag of 0 for "end of stream".
/// </summary>
/// <remarks>
/// If this method returns 0, it doesn't necessarily mean the end of all
/// the data in this CodedInputStream; it may be the end of the logical stream
/// for an embedded message, for example.
/// </remarks>
/// <returns>The next field tag, or 0 for end of stream. (0 is never a valid tag.)</returns>
public uint ReadTag()
{
var span = new ReadOnlySpan <byte>(buffer);
return(ParsingPrimitives.ParseTag(ref span, ref state));
}
public ByteString ReadBytes()
{
return(ParsingPrimitives.ReadBytes(ref buffer, ref state));
}
