/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Narrow_Range(SlotTypes slotType)
{
// General properties
IndicatorName = "Narrow Range";
PossibleSlots = SlotTypes.OpenFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"There is a NR4 formation",
"There is a NR7 formation",
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Indicator's logic.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Percent_Change(SlotTypes slotType)
{
// General properties
IndicatorName = "Percent Change";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Percent Change rises",
"The Percent Change falls",
"The Percent Change is higher than the Level line",
"The Percent Change is lower than the Level line",
"The Percent Change crosses the Level line upward",
"The Percent Change crosses the Level line downward",
"The Percent Change changes its direction upward",
"The Percent Change changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[1].Index = (int)BasePrice.Close;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The price the Percent Change is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "Period used to calculate the Percent Change value.";
IndParam.NumParam[1].Caption = "Level";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = -100;
IndParam.NumParam[1].Max = 100;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Force_Index(SlotTypes slotType)
{
// General properties
IndicatorName = "Force Index";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Force Index rises",
"The Force Index falls",
"The Force Index is higher than the zero line",
"The Force Index is lower than the zero line",
"The Force Index crosses the zero line upward",
"The Force Index crosses the zero line downward",
"The Force Index changes its direction upward",
"The Force Index changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The method of smoothing.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = (int)BasePrice.Close;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the Force Index is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 13;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 100;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The smoothing period.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Day_Closing(SlotTypes slotType)
{
// General properties
IndicatorName = "Day Closing";
PossibleSlots = SlotTypes.Close;
AllowClosingFilters = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
IndParam.ExecutionTime = ExecutionTime.AtBarClosing;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[] { "Exit the market at the end of the day" };
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[1].ToolTip = "The execution price of all exit orders.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Close" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Exit price of the position.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Parabolic_SAR(SlotTypes slotType)
{
// General properties
IndicatorName = "Parabolic SAR";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.OpenFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The price is higher than the PSAR value"
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit the market at PSAR"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Starting AF";
IndParam.NumParam[0].Value = 0.02;
IndParam.NumParam[0].Min = 0.00;
IndParam.NumParam[0].Max = 5.00;
IndParam.NumParam[0].Point = 2;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The starting value of Acceleration Factor.";
IndParam.NumParam[1].Caption = "Increment";
IndParam.NumParam[1].Value = 0.02;
IndParam.NumParam[1].Min = 0.01;
IndParam.NumParam[1].Max = 5.00;
IndParam.NumParam[1].Point = 2;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "Increment value.";
IndParam.NumParam[2].Caption = "Maximum AF";
IndParam.NumParam[2].Value = 2.00;
IndParam.NumParam[2].Min = 0.01;
IndParam.NumParam[2].Max = 9.00;
IndParam.NumParam[2].Point = 2;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The maximum value of the Acceleration Factor.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public On_Balance_Volume(SlotTypes slotType)
{
// General properties
IndicatorName = "On Balance Volume";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The On Balance Volume rises",
"The On Balance Volume falls",
"The On Balance Volume changes its direction upward",
"The On Balance Volume changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Fractal(SlotTypes slotType)
{
// General properties
IndicatorName = "Fractal";
PossibleSlots = SlotTypes.Open | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at an Up Fractal",
"Enter long at a Down Fractal"
};
}
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at an Up Fractal",
"Exit long at a Down Fractal"
};
}
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Visibility";
IndParam.ListParam[1].ItemList = new string[]
{
"The fractal is visible",
"The fractal can be shadowed"
};
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Is the fractal visible from the current market point.";
IndParam.NumParam[0].Caption = "Vertical shift";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = -2000;
IndParam.NumParam[0].Max = +2000;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "A vertical shift above Up Fractal and below Down Fractal.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Previous_Bar_Closing(SlotTypes slotType)
{
// General properties
IndicatorName = "Previous Bar Closing";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[]
{
"Enter the market at the previous Bar Closing"
};
else if (slotType == SlotTypes.OpenFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens above the previous Bar Closing",
"The bar opens below the previous Bar Closing",
"The position opens above the previous Bar Closing",
"The position opens below the previous Bar Closing"
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit the market at the previous Bar Closing"
};
else if (slotType == SlotTypes.CloseFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes above the previous Bar Closing",
"The bar closes below the previous Bar Closing"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Previous Bar Closing" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Used price from the indicator.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Ease_of_Movement(SlotTypes slotType)
{
// General properties
IndicatorName = "Ease of Movement";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Ease of Movement rises",
"The Ease of Movement falls",
"The Ease of Movement changes its direction upward",
"The Ease of Movement changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The method of smoothing.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 13;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 100;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The smoothing period.";
IndParam.NumParam[1].Caption = "Volume divisor";
IndParam.NumParam[1].Value = 10000;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 100000;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "This number is used to scale the volume.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Money_Flow_Index(SlotTypes slotType)
{
// General properties
IndicatorName = "Money Flow Index";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
SeparatedChartMinValue = 0;
SeparatedChartMaxValue = 100;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The MFI rises",
"The MFI falls",
"The MFI is higher than the Level line",
"The MFI is lower than the Level line",
"The MFI crosses the Level line upward",
"The MFI crosses the Level line downward",
"The MFI changes its direction upward",
"The MFI changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the MFI.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 14;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of Money Flow Index.";
IndParam.NumParam[1].Caption = "Level";
IndParam.NumParam[1].Value = 50 ;
IndParam.NumParam[1].Min = 0 ;
IndParam.NumParam[1].Max = 100;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Oscillator_of_OBOS(SlotTypes slotType)
{
// General properties
IndicatorName = "Oscillator of OBOS";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.OscillatorOfIndicators;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Oscillator rises",
"The Oscillator falls",
"The Oscillator is higher than the zero line",
"The Oscillator is lower than the zero line",
"The Oscillator crosses the zero line upward",
"The Oscillator crosses the zero line downward",
"The Oscillator changes its direction upward",
"The Oscillator changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the oscillator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "First OBOS period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of first OBOS.";
IndParam.NumParam[1].Caption = "Second OBOS period";
IndParam.NumParam[1].Value = 14;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The period of second OBOS.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Constructor
/// </summary>
public Round_Number(SlotTypes slotType)
{
// General properties
IndicatorName = "Round Number";
PossibleSlots = SlotTypes.Open | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the higher round number",
"Enter long at the lower round number"
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the higher round number",
"Exit long at the lower round number"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Vertical shift";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = -2000;
IndParam.NumParam[0].Max = +2000;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "A vertical shift above the higher and below the lower round number.";
// The NumericUpDown parameters
IndParam.NumParam[1].Caption = "Digids";
IndParam.NumParam[1].Value = 2;
IndParam.NumParam[1].Min = 2;
IndParam.NumParam[1].Max = 4;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "Number of digids to be rounded.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Entry_Time(SlotTypes slotType)
{
// General properties
IndicatorName = "Entry Time";
PossibleSlots = SlotTypes.OpenFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Enter the market between the specified hours"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Indicator's logic.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "From hour (incl.)";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 23;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "Beginning of the entry period.";
IndParam.NumParam[1].Caption = "From min (incl.)";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 59;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "Beginning of the entry period.";
IndParam.NumParam[2].Caption = "Until hour (excl.)";
IndParam.NumParam[2].Value = 24;
IndParam.NumParam[2].Min = 0;
IndParam.NumParam[2].Max = 24;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "End of the entry period.";
IndParam.NumParam[3].Caption = "Until min( excl.)";
IndParam.NumParam[3].Value = 0;
IndParam.NumParam[3].Min = 0;
IndParam.NumParam[3].Max = 59;
IndParam.NumParam[3].Enabled = true;
IndParam.NumParam[3].ToolTip = "End of the entry period.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Bar_Range(SlotTypes slotType)
{
// General properties
IndicatorName = "Bar Range";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
SeparatedChartMinValue = 0;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Bar Range rises",
"The Bar Range falls",
"The Bar Range is higher than the Level line",
"The Bar Range is lower than the Level line"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Number of bars";
IndParam.NumParam[0].Value = 1;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The number of bars to calculate the range.";
IndParam.NumParam[1].Caption = "Level";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 5000;
IndParam.NumParam[1].Point = 0;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Relative_Vigor_Index(SlotTypes slotType)
{
// General properties
IndicatorName = "Relative Vigor Index";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The RVI line rises",
"The RVI line falls",
"The RVI line is higher than zero",
"The RVI line is lower than zero",
"The RVI line crosses the zero line upward",
"The RVI line crosses the zero line downward",
"The RVI line changes its direction upward",
"The RVI line changes its direction downward",
"The RVI line crosses the Signal line upward",
"The RVI line crosses the Signal line downward",
"The RVI line is higher than the Signal line",
"The RVI line is lower than the Signal line"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "RVI period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of Slow MA.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Entry_Hour(SlotTypes slotType)
{
// General properties
IndicatorName = "Entry Hour";
PossibleSlots = SlotTypes.Open;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
IndParam.ExecutionTime = ExecutionTime.AtBarOpening;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Enter the market at the specified hour"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Indicator's logic.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Open" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The execution price of all entry orders.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Entry hour";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 23;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The position's opening hour.";
// The NumericUpDown parameters
IndParam.NumParam[1].Caption = "Entry minutes";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 59;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The position's opening minute.";
return;
}
/// <summary>
/// The default constructor
/// </summary>
public Indicator()
{
indicatorName = string.Empty;
possibleSlots = SlotTypes.NotDefined;
isSeparatedChart = false;
sepChartMinValue = double.MaxValue;
sepChartMaxValue = double.MinValue;
isDescreteValues = false;
isCustomIndicator = false;
warningMessage = string.Empty;
allowClosingFilters = false;
adSpecialValues = new double[] { };
parameters = new IndicatorParam();
component = new IndicatorComp[] { };
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Week_Closing_2(SlotTypes slotType)
{
// General properties
IndicatorName = "Week Closing 2";
PossibleSlots = SlotTypes.Close;
AllowClosingFilters = true;
WarningMessage = "The indicator sends a close signal at first tick after the selected time." + Environment.NewLine +
"It prevents opening of new positions after the closing time on the same day." + Environment.NewLine +
"The indicator uses the server time that comes from the broker together with ticks.";
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[] { "Exit the market at the end of the week" };
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[1].ToolTip = "The execution price of all exit orders.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Close" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Exit price of the position.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Friday close hour";
IndParam.NumParam[0].Value = 19;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 23;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The hour we want to close at.";
IndParam.NumParam[1].Caption = "Friday close min";
IndParam.NumParam[1].Value = 59;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 59;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The minutes of the closing hour";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Price_Move(SlotTypes slotType)
{
// General properties
IndicatorName = "Price Move";
PossibleSlots = SlotTypes.Open;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long after an upward move",
"Enter long after a downward move"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[1].Index = (int)BasePrice.Open;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The price where the move starts from.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Price move";
IndParam.NumParam[0].Value = 20;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 2000;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The price move in pips.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = false;
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Fibonacci(SlotTypes slotType)
{
// General properties
IndicatorName = "Fibonacci";
PossibleSlots = SlotTypes.Open;
WarningMessage = "Fibonacci indicator is included in the program for demonstration only." +
" This indicator tends to change past signals. That behaviour leads to unreliable back test results." +
" It’s not recommended Fibonacci to be used in real trading strategies.";
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"This indicator is for demo only!!!"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Direction";
IndParam.ListParam[1].ItemList = new string[]
{
"Breakout",
"Retracement"
};
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Direction of trade.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Sensitivity";
IndParam.NumParam[0].Value = 15;
IndParam.NumParam[0].Min = 10;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "Sensitivity of the indicator.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Data_Bars_Filter(SlotTypes slotType)
{
// General properties
IndicatorName = "Data Bars Filter";
PossibleSlots = SlotTypes.OpenFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Do not use the newest bars",
"Do not use the oldest bars",
"Do not use the newest bars and oldest bars",
"Use the newest bars only",
"Use the oldest bars only",
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Specify the entry bars.";
// The NumericUpDown parameters.
IndParam.NumParam[0].Caption = "Newest bars";
IndParam.NumParam[0].Value = 1000;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 20000;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The number of newest bars.";
IndParam.NumParam[1].Caption = "Oldest bars";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 20000;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The number of oldest bars.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Date_Filter(SlotTypes slotType)
{
// General properties
IndicatorName = "Date Filter";
PossibleSlots = SlotTypes.OpenFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Do not open positions before",
"Do not open positions after"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of the date filter.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Year";
IndParam.NumParam[0].Value = 2000;
IndParam.NumParam[0].Min = 1900;
IndParam.NumParam[0].Max = 2100;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The year.";
IndParam.NumParam[1].Caption = "Month";
IndParam.NumParam[1].Value = 1;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 12;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The month.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Exit_Hour(SlotTypes slotType)
{
// General properties
IndicatorName = "Exit Hour";
PossibleSlots = SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.ExecutionTime = ExecutionTime.AtBarClosing;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Exit the market before the specified hour"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Indicator's logic.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Close" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Exit price of the position.";
// The NumericUpDown parameters.
IndParam.NumParam[0].Caption = "Exit hour";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 24;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The position's closing hour.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Day_of_Week(SlotTypes slotType)
{
// General properties
PossibleSlots = SlotTypes.OpenFilter;
IndicatorName = "Day of Week";
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"Enter the market between the specified days"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Indicators' logic.";
IndParam.ListParam[1].Caption = "From (incl.)";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(DayOfWeek));
IndParam.ListParam[1].Index = (int)DayOfWeek.Monday;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Day of beginning for the entry period.";
IndParam.ListParam[2].Caption = "To (excl.)";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(DayOfWeek));
IndParam.ListParam[2].Index = (int)DayOfWeek.Saturday;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "End day for the entry period.";
return;
}
/// <summary>
/// Constructor
/// </summary>
public Ross_Hook(SlotTypes slotType)
{
// General properties
IndicatorName = "Ross Hook";
PossibleSlots = SlotTypes.Open | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at an Up Ross hook",
"Enter long at a Down Ross hook"
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at an Up Ross hook",
"Exit long at a Down Ross hook"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Detrended_Oscillator(SlotTypes slotType)
{
// General properties
IndicatorName = "Detrended Oscillator";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Detrended Oscillator rises",
"The Detrended Oscillator falls",
"The Detrended Oscillator is higher than the zero line",
"The Detrended Oscillator is lower than the zero line",
"The Detrended Oscillator crosses the zero line upward",
"The Detrended Oscillator crosses the zero line downward",
"The Detrended Oscillator changes its direction upward",
"The Detrended Oscillator changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method MA1";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The method of smoothing of MA1.";
IndParam.ListParam[2].Caption = "Smoothing method MA2";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[2].Index = (int)MAMethod.Simple;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The method of smoothing of MA2.";
IndParam.ListParam[3].Caption = "Base price";
IndParam.ListParam[3].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[3].Index = (int)BasePrice.Close;
IndParam.ListParam[3].Text = IndParam.ListParam[3].ItemList[IndParam.ListParam[3].Index];
IndParam.ListParam[3].Enabled = true;
IndParam.ListParam[3].ToolTip = "The price the MA is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period MA1";
IndParam.NumParam[0].Value = 13;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 100;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The smoothing period of MA1.";
IndParam.NumParam[1].Caption = "Period MA2";
IndParam.NumParam[1].Value = 3;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 100;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The smoothing period of MA2.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Hourly_High_Low(SlotTypes slotType)
{
// General properties
IndicatorName = "Hourly High Low";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the hourly high",
"Enter long at the hourly low"
}
}
;
else if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The position opens above the hourly high",
"The position opens below the hourly high",
"The position opens above the hourly low",
"The position opens below the hourly low"
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the hourly high",
"Exit long at the hourly low"
}
}
;
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes above the hourly high",
"The bar closes below the hourly high",
"The bar closes above the hourly low",
"The bar closes below the hourly low"
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "High and Low" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Used price from the indicator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Start hour (incl.)";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 24;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The starting hour of the period.";
IndParam.NumParam[1].Caption = "Start minutes (incl.)";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 59;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The starting minutes of the period.";
IndParam.NumParam[2].Caption = "End hour (excl.)";
IndParam.NumParam[2].Value = 24;
IndParam.NumParam[2].Min = 0;
IndParam.NumParam[2].Max = 24;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The ending hour of the period.";
IndParam.NumParam[3].Caption = "End minutes (excl.)";
IndParam.NumParam[3].Value = 0;
IndParam.NumParam[3].Min = 0;
IndParam.NumParam[3].Max = 59;
IndParam.NumParam[3].Enabled = true;
IndParam.NumParam[3].ToolTip = "The ending minutes of the period.";
IndParam.NumParam[4].Caption = "Vertical shift";
IndParam.NumParam[4].Value = 0;
IndParam.NumParam[4].Min = -2000;
IndParam.NumParam[4].Max = +2000;
IndParam.NumParam[4].Enabled = true;
IndParam.NumParam[4].ToolTip = "A vertical shift above the high and below the low price.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Moving_Average(SlotTypes slotType)
{
// General properties
IndicatorName = "Moving Average";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter the market at the Moving Average"
}
}
;
else if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The Moving Average rises",
"The Moving Average falls",
"The bar opens above the Moving Average",
"The bar opens below the Moving Average",
"The bar opens above the Moving Average after opening below it",
"The bar opens below the Moving Average after opening above it",
"The position opens above the Moving Average",
"The position opens below the Moving Average",
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit the market at the Moving Average"
}
}
;
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The Moving Average rises",
"The Moving Average falls",
"The bar closes below the Moving Average",
"The bar closes above the Moving Average",
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the Moving Average.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The smoothing method of Moving Average.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = (int)BasePrice.Close;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the Moving Average is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 14;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The Moving Average period.";
IndParam.NumParam[1].Caption = "Shift";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "How many bars to shift with.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Pivot_Points(SlotTypes slotType)
{
// General properties
IndicatorName = "Pivot Points";
PossibleSlots = SlotTypes.Open | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at R3 (short at S3)",
"Enter long at R2 (short at S2)",
"Enter long at R1 (short at S1)",
"Enter the market at the Pivot Point",
"Enter long at S1 (short at R1)",
"Enter long at S2 (short at R2)",
"Enter long at S3 (short at R3)",
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at R3 (short at S3)",
"Exit long at R2 (short at S2)",
"Exit long at R1 (short at S1)",
"Exit the market at the Pivot Point",
"Exit long at S1 (short at R1)",
"Exit long at S2 (short at R2)",
"Exit long at S3 (short at R3)",
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "One day", "One bar" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Vertical shift";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Max = +2000;
IndParam.NumParam[0].Min = -2000;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "A vertical shift above the Resistance and below the Support levels.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Donchian_Channel(SlotTypes slotType)
{
// General properties
IndicatorName = "Donchian Channel";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the Upper Band",
"Enter long at the Lower Band"
};
else if (slotType == SlotTypes.OpenFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens below the Upper Band",
"The bar opens above the Upper Band",
"The bar opens below the Lower Band",
"The bar opens above the Lower Band",
"The position opens below the Upper Band",
"The position opens above the Upper Band",
"The position opens below the Lower Band",
"The position opens above the Lower Band",
"The bar opens below the Upper Band after opening above it",
"The bar opens above the Upper Band after opening below it",
"The bar opens below the Lower Band after opening above it",
"The bar opens above the Lower Band after opening below it",
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the Upper Band",
"Exit long at the Lower Band"
};
else if (slotType == SlotTypes.CloseFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes below the Upper Band",
"The bar closes above the Upper Band",
"The bar closes below the Lower Band",
"The bar closes above the Lower Band"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the Donchian Channel.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "High & Low" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The width of the range we are looking for an extreme in.";
IndParam.NumParam[1].Caption = "Shift";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The number of bars to shift with.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Steady_Bands(SlotTypes slotType)
{
// General properties
IndicatorName = "Steady Bands";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the Upper Band",
"Enter long at the Lower Band"
}
}
;
else if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens below the Upper Band",
"The bar opens above the Upper Band",
"The bar opens below the Lower Band",
"The bar opens above the Lower Band",
"The position opens below the Upper Band",
"The position opens above the Upper Band",
"The position opens below the Lower Band",
"The position opens above the Lower Band",
"The bar opens below the Upper Band after opening above it",
"The bar opens above the Upper Band after opening below it",
"The bar opens below the Lower Band after opening above it",
"The bar opens above the Lower Band after opening below it",
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the Upper Band",
"Exit long at the Lower Band"
}
}
;
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes below the Upper Band",
"The bar closes above the Upper Band",
"The bar closes below the Lower Band",
"The bar closes above the Lower Band"
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The method of smoothing of central Moving Average.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = 3;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the central Moving Average is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "MA period";
IndParam.NumParam[0].Value = 20;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The central Moving Average period.";
IndParam.NumParam[1].Caption = "Margin in pips";
IndParam.NumParam[1].Value = 40;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 2000;
IndParam.NumParam[1].Point = 0;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "Determines the distance between the ME and the Upper (Lower) Band.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Bulls_Bears_Power(SlotTypes slotType)
{
// General properties
IndicatorName = "Bulls Bears Power";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The BBP rises",
"The BBP falls",
"The BBP is higher than the Level line",
"The BBP is lower than the Level line",
"The BBP crosses the Level line upward",
"The BBP crosses the Level line downward",
"The BBP changes its direction upward",
"The BBP changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Exponential;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing the Bulls Bears Power value.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Smoothing period";
IndParam.NumParam[0].Value = 13;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of smoothing of the Bulls Bears Power value.";
IndParam.NumParam[1].Caption = "Level";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = -100;
IndParam.NumParam[1].Max = 100;
IndParam.NumParam[1].Point = 4;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Price_Oscillator(SlotTypes slotType)
{
// General properties
IndicatorName = "Price Oscillator";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Price Oscillator rises",
"The Price Oscillator falls",
"The Price Oscillator is higher than the Level line",
"The Price Oscillator is lower than the Level line",
"The Price Oscillator crosses the Level line upward",
"The Price Oscillator crosses the Level line downward",
"The Price Oscillator changes its direction upward",
"The Price Oscillator changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the oscillator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing the PO.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = (int)BasePrice.Close;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the indicator is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of Price Oscillator.";
IndParam.NumParam[1].Caption = "Additional smoothing";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The value of smoothing period.";
IndParam.NumParam[2].Caption = "Level";
IndParam.NumParam[2].Value = 0;
IndParam.NumParam[2].Min = -100;
IndParam.NumParam[2].Max = 100;
IndParam.NumParam[2].Point = 4;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters.
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Previous_Bar_Opening(SlotTypes slotType)
{
// General properties
IndicatorName = "Previous Bar Opening";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter the market at the previous Bar Opening"
}
}
;
else if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens above the previous Bar Opening",
"The bar opens below the previous Bar Opening",
"The position opens above the previous Bar Opening",
"The position opens below the previous Bar Opening"
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit the market at the previous Bar Opening"
}
}
;
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes above the previous Bar Opening",
"The bar closes below the previous Bar Opening"
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Previous Bar Opening" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Used price from the indicator.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Day_Closing_2(SlotTypes slotType)
{
// General properties
IndicatorName = "Day Closing 2";
PossibleSlots = SlotTypes.Close;
AllowClosingFilters = true;
WarningMessage = "The indicator sends a close signal at first tick after the selected time." + Environment.NewLine +
"It prevents opening of new positions after the closing time on the same day." + Environment.NewLine +
"The indicator uses the server time that comes from the broker together with ticks.";
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.DateTime;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[] { "Exit the market at the end of the day" };
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[1].ToolTip = "The execution price of all exit orders.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "Close" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Exit price of the position.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Day close hour";
IndParam.NumParam[0].Value = 23;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 23;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The hour we want to close at.";
IndParam.NumParam[1].Caption = "Day close min";
IndParam.NumParam[1].Value = 59;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 59;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The minutes of the closing hour";
IndParam.NumParam[2].Caption = "Friday close hour";
IndParam.NumParam[2].Value = 19;
IndParam.NumParam[2].Min = 0;
IndParam.NumParam[2].Max = 23;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The hour we want to close at on Friday.";
IndParam.NumParam[3].Caption = "Friday close min";
IndParam.NumParam[3].Value = 59;
IndParam.NumParam[3].Min = 0;
IndParam.NumParam[3].Max = 59;
IndParam.NumParam[3].Enabled = true;
IndParam.NumParam[3].ToolTip = "The minutes of the closing hour";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Average_True_Range(SlotTypes slotType)
{
// General properties
IndicatorName = "Average True Range";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The ATR rises",
"The ATR falls",
"The ATR is higher than the Level line",
"The ATR is lower than the Level line",
"The ATR crosses the Level line upward",
"The ATR crosses the Level line downward",
"The ATR changes its direction upward",
"The ATR changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing the ATR.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = new string[] { "Bar range" };
IndParam.ListParam[2].Index = 0;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "ATR uses the range of the current bar";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Smoothing period";
IndParam.NumParam[0].Value = 14;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of ATR smoothing.";
IndParam.NumParam[1].Caption = "Level [pips]";
IndParam.NumParam[1].Value = 100;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 2000;
IndParam.NumParam[1].Point = 0;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "A critical level in pips(for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Aroon_Histogram(SlotTypes slotType)
{
// General properties
IndicatorName = "Aroon Histogram";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
SeparatedChartMinValue = -100;
SeparatedChartMaxValue = 100;
IsDescreteValues = true; // <------------
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Aroon Histogram rises",
"The Aroon Histogram falls",
"The Aroon Histogram is higher than the Level line",
"The Aroon Histogram is lower than the Level line",
"The Aroon Histogram crosses the Level line upward",
"The Aroon Histogram crosses the Level line downward",
"The Aroon Histogram changes its direction upward",
"The Aroon Histogram changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[1].Index = (int)BasePrice.Close;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The price the Aroon is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 9;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "Period used to calculate the Aroon value.";
IndParam.NumParam[1].Caption = "Level";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = -100;
IndParam.NumParam[1].Max = 100;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Donchian_Channel(SlotTypes slotType)
{
// General properties
IndicatorName = "Donchian Channel";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the Upper Band",
"Enter long at the Lower Band"
}
}
;
else if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens below the Upper Band",
"The bar opens above the Upper Band",
"The bar opens below the Lower Band",
"The bar opens above the Lower Band",
"The position opens below the Upper Band",
"The position opens above the Upper Band",
"The position opens below the Lower Band",
"The position opens above the Lower Band",
"The bar opens below the Upper Band after opening above it",
"The bar opens above the Upper Band after opening below it",
"The bar opens below the Lower Band after opening above it",
"The bar opens above the Lower Band after opening below it",
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the Upper Band",
"Exit long at the Lower Band"
}
}
;
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes below the Upper Band",
"The bar closes above the Upper Band",
"The bar closes below the Lower Band",
"The bar closes above the Lower Band"
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the Donchian Channel.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "High & Low" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The width of the range we are looking for an extreme in.";
IndParam.NumParam[1].Caption = "Shift";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The number of bars to shift with.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Williams_Percent_Range(SlotTypes slotType)
{
// General properties
IndicatorName = "Williams' Percent Range";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
SeparatedChartMinValue = -100;
SeparatedChartMaxValue = 0;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The %R rises",
"The %R falls",
"The %R is higher than the Level line",
"The %R is lower than the Level line",
"The %R crosses the Level line upward",
"The %R crosses the Level line downward",
"The %R changes its direction upward",
"The %R changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing.";
IndParam.NumParam[0].Caption = "Period of %R";
IndParam.NumParam[0].Value = 14;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of calculation.";
IndParam.NumParam[1].Caption = "Smoothing period";
IndParam.NumParam[1].Value = 0;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The period of an additional smoothing.";
IndParam.NumParam[2].Caption = "Level";
IndParam.NumParam[2].Value = -20;
IndParam.NumParam[2].Min = -100;
IndParam.NumParam[2].Max = 0;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters.
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Parabolic_SAR(SlotTypes slotType)
{
// General properties
IndicatorName = "Parabolic SAR";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"The price is higher than the PSAR value"
}
}
;
else if (slotType == SlotTypes.Close)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Exit the market at PSAR"
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Starting AF";
IndParam.NumParam[0].Value = 0.02;
IndParam.NumParam[0].Min = 0.00;
IndParam.NumParam[0].Max = 5.00;
IndParam.NumParam[0].Point = 2;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The starting value of Acceleration Factor.";
IndParam.NumParam[1].Caption = "Increment";
IndParam.NumParam[1].Value = 0.02;
IndParam.NumParam[1].Min = 0.01;
IndParam.NumParam[1].Max = 5.00;
IndParam.NumParam[1].Point = 2;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "Increment value.";
IndParam.NumParam[2].Caption = "Maximum AF";
IndParam.NumParam[2].Value = 2.00;
IndParam.NumParam[2].Min = 0.01;
IndParam.NumParam[2].Max = 9.00;
IndParam.NumParam[2].Point = 2;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The maximum value of the Acceleration Factor.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Alligator(SlotTypes slotType)
{
// General properties
IndicatorName = "Alligator";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Lips rises",
"The Lips falls",
"The Teeth rises",
"The Teeth falls",
"The Jaws rises",
"The Jaws falls",
"The Lips crosses the Teeth upward",
"The Lips crosses the Teeth downward",
"The Lips crosses the Jaws upward",
"The Lips crosses the Jaws downward",
"The Teeth crosses the Jaws upward",
"The Teeth crosses the Jaws downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Smoothed;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The method of Moving Average used for the calculations.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = (int)BasePrice.Median;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the indicator is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Jaws period";
IndParam.NumParam[0].Value = 13;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The Moving Average period.";
IndParam.NumParam[1].Caption = "Jaws shift";
IndParam.NumParam[1].Value = 8;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "How many bars to shift with.";
IndParam.NumParam[2].Caption = "Teeth period";
IndParam.NumParam[2].Value = 8;
IndParam.NumParam[2].Min = 1;
IndParam.NumParam[2].Max = 200;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The Moving Average period.";
IndParam.NumParam[3].Caption = "Teeth shift";
IndParam.NumParam[3].Value = 5;
IndParam.NumParam[3].Min = 0;
IndParam.NumParam[3].Max = 200;
IndParam.NumParam[3].Enabled = true;
IndParam.NumParam[3].ToolTip = "How many bars to shift with.";
IndParam.NumParam[4].Caption = "Lips period";
IndParam.NumParam[4].Value = 5;
IndParam.NumParam[4].Min = 1;
IndParam.NumParam[4].Max = 200;
IndParam.NumParam[4].Enabled = true;
IndParam.NumParam[4].ToolTip = "The Moving Average period.";
IndParam.NumParam[5].Caption = "Lips shift";
IndParam.NumParam[5].Value = 3;
IndParam.NumParam[5].Min = 0;
IndParam.NumParam[5].Max = 200;
IndParam.NumParam[5].Enabled = true;
IndParam.NumParam[5].ToolTip = "How many bars to shift with.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Stochastics(SlotTypes slotType)
{
// General properties
IndicatorName = "Stochastics";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
SeparatedChartMinValue = 0;
SeparatedChartMaxValue = 100;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Slow %D rises",
"The Slow %D falls",
"The Slow %D is higher than the Level line",
"The Slow %D is lower than the Level line",
"The Slow %D crosses the Level line upward",
"The Slow %D crosses the Level line downward",
"The Slow %D changes its direction upward",
"The Slow %D changes its direction downward",
"The %K is higher than the Slow %D",
"The %K is lower than the Slow %D",
"The %K crosses the Slow %D upward",
"The %K crosses the Slow %D downward",
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing.";
IndParam.NumParam[0].Caption = "%K period";
IndParam.NumParam[0].Value = 5;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The smoothing period of %K.";
IndParam.NumParam[1].Caption = "Fast %D period";
IndParam.NumParam[1].Value = 3;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The smoothing period of Fast %D.";
IndParam.NumParam[2].Caption = "Slow %D period";
IndParam.NumParam[2].Value = 3;
IndParam.NumParam[2].Min = 1;
IndParam.NumParam[2].Max = 200;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The smoothing period of Slow %D.";
IndParam.NumParam[3].Caption = "Level";
IndParam.NumParam[3].Value = 20;
IndParam.NumParam[3].Min = 0;
IndParam.NumParam[3].Max = 100;
IndParam.NumParam[3].Enabled = true;
IndParam.NumParam[3].ToolTip = "A critical level (for the appropriate logic).";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Ichimoku_Kinko_Hyo(SlotTypes slotType)
{
// General properties
IndicatorName = "Ichimoku Kinko Hyo";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[] {
"Enter the market at the Tenkan Sen",
"Enter the market at the Kijun Sen",
};
else if (slotType == SlotTypes.OpenFilter)
IndParam.ListParam[0].ItemList = new string[] {
"The Tenkan Sen rises",
"The Kijun Sen rises",
"The Tenkan Sen is higher than the Kijun Sen",
"The Tenkan Sen crosses the Kijun Sen upward",
"The bar opens above the Tenkan Sen",
"The bar opens above the Kijun Sen",
"The Chikou Span is above the closing price",
"The position opens above the Kumo",
"The position opens inside or above the Kumo",
"The Tenkan Sen is above the Kumo",
"The Tenkan Sen is inside or above the Kumo",
"The Kijun Sen is above the Kumo",
"The Kijun Sen is inside or above the Kumo",
"The Senkou Span A is higher than the Senkou Span B",
"The Senkou Span A crosses the Senkou Span B upward",
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[] {
"Exit the market at the Tenkan Sen",
"Exit the market at the Kijun Sen",
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Application of Ichimoku Kinko Hyo.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Tenkan";
IndParam.NumParam[0].Value = 9;
IndParam.NumParam[0].Min = 6;
IndParam.NumParam[0].Max = 12;
IndParam.NumParam[0].Point = 0;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The Tenkan Sen period.";
IndParam.NumParam[2].Caption = "Kijun";
IndParam.NumParam[2].Value = 26;
IndParam.NumParam[2].Min = 18;
IndParam.NumParam[2].Max = 34;
IndParam.NumParam[2].Point = 0;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The Kijun Sen period, Chikou Span period and Senkou Span shift.";
IndParam.NumParam[4].Caption = "Senkou Span B";
IndParam.NumParam[4].Value = 52;
IndParam.NumParam[4].Min = 36;
IndParam.NumParam[4].Max = 84;
IndParam.NumParam[4].Point = 0;
IndParam.NumParam[4].Enabled = true;
IndParam.NumParam[4].ToolTip = "The Senkou Span B period.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public MACD(SlotTypes slotType)
{
// General properties
IndicatorName = "MACD";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The MACD line rises",
"The MACD line falls",
"The MACD line is higher than zero",
"The MACD line is lower than zero",
"The MACD line crosses the zero line upward",
"The MACD line crosses the zero line downward",
"The MACD line changes its direction upward",
"The MACD line changes its direction downward",
"The MACD line crosses the Signal line upward",
"The MACD line crosses the Signal line downward",
"The MACD line is higher than the Signal line",
"The MACD line is lower than the Signal line"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Exponential;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The smoothing method of Moving Averages.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = (int)BasePrice.Close;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the Moving Averages are based on.";
IndParam.ListParam[3].Caption = "Signal line method";
IndParam.ListParam[3].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[3].Index = (int)MAMethod.Simple;
IndParam.ListParam[3].Text = IndParam.ListParam[3].ItemList[IndParam.ListParam[3].Index];
IndParam.ListParam[3].Enabled = true;
IndParam.ListParam[3].ToolTip = "The smoothing method of the signal line.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Slow MA period";
IndParam.NumParam[0].Value = 26;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of Slow MA.";
IndParam.NumParam[1].Caption = "Fast MA period";
IndParam.NumParam[1].Value = 12;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The period of Fast MA.";
IndParam.NumParam[2].Caption = "Signal line period.";
IndParam.NumParam[2].Value = 9;
IndParam.NumParam[2].Min = 1;
IndParam.NumParam[2].Max = 200;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The period of Signal line.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public CCI_MA_Oscillator(SlotTypes slotType)
{
// General properties
IndicatorName = "CCI MA Oscillator";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.IndicatorsMA;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The CCI MA Oscillator rises",
"The CCI MA Oscillator falls",
"The CCI MA Oscillator is higher than the zero line",
"The CCI MA Oscillator is lower than the zero line",
"The CCI MA Oscillator crosses the zero line upward",
"The CCI MA Oscillator crosses the zero line downward",
"The CCI MA Oscillator changes its direction upward",
"The CCI MA Oscillator changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the oscillator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing the CCI value.";
IndParam.ListParam[2].Caption = "Signal line method";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[2].Index = (int)MAMethod.Exponential;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The Moving Average method used for smoothing the signal line.";
IndParam.ListParam[3].Caption = "Base price";
IndParam.ListParam[3].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[3].Index = (int)BasePrice.Typical;
IndParam.ListParam[3].Text = IndParam.ListParam[3].ItemList[IndParam.ListParam[3].Index];
IndParam.ListParam[3].Enabled = true;
IndParam.ListParam[3].ToolTip = "The base price of Commodity Channel Index.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "CCI period";
IndParam.NumParam[0].Value = 14;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of Commodity Channel Index.";
IndParam.NumParam[1].Caption = "Signal line period";
IndParam.NumParam[1].Value = 13;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The period of signal line.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Moving_Averages_Crossover(SlotTypes slotType)
{
// General properties
IndicatorName = "Moving Averages Crossover";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Fast MA crosses the Slow MA upward",
"The Fast MA crosses the Slow MA downward",
"The Fast MA is higher than the Slow MA",
"The Fast MA is lower than the Slow MA",
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[1].Index = (int)BasePrice.Close;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The price both Moving Averages are based on.";
IndParam.ListParam[3].Caption = "Fast MA method";
IndParam.ListParam[3].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[3].Index = (int)MAMethod.Simple;
IndParam.ListParam[3].Text = IndParam.ListParam[3].ItemList[IndParam.ListParam[3].Index];
IndParam.ListParam[3].Enabled = true;
IndParam.ListParam[3].ToolTip = "The method used for smoothing the Fast Moving Averages.";
IndParam.ListParam[4].Caption = "Slow MA method";
IndParam.ListParam[4].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[4].Index = (int)MAMethod.Simple;
IndParam.ListParam[4].Text = IndParam.ListParam[4].ItemList[IndParam.ListParam[4].Index];
IndParam.ListParam[4].Enabled = true;
IndParam.ListParam[4].ToolTip = "The method used for smoothing the slow Moving Averages.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Fast MA period";
IndParam.NumParam[0].Value = 13;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of Fast MA.";
IndParam.NumParam[1].Caption = "Slow MA period";
IndParam.NumParam[1].Value = 21;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The period of Slow MA.";
IndParam.NumParam[2].Caption = "Fast MA shift";
IndParam.NumParam[2].Value = 0;
IndParam.NumParam[2].Min = 0;
IndParam.NumParam[2].Max = 100;
IndParam.NumParam[2].Point = 0;
IndParam.NumParam[2].Enabled = true;
IndParam.NumParam[2].ToolTip = "The shifting value of Fast MA.";
IndParam.NumParam[3].Caption = "Slow MA shift";
IndParam.NumParam[3].Value = 0;
IndParam.NumParam[3].Min = 0;
IndParam.NumParam[3].Max = 100;
IndParam.NumParam[3].Point = 0;
IndParam.NumParam[3].Enabled = true;
IndParam.NumParam[3].ToolTip = "The shifting value of Slow MA.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Top_Bottom_Price(SlotTypes slotType)
{
// General properties
IndicatorName = "Top Bottom Price";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the top price",
"Enter long at the bottom price"
};
else if (slotType == SlotTypes.OpenFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens below the top price",
"The bar opens above the top price",
"The bar opens below the bottom price",
"The bar opens above the bottom price",
"The position opens below the top price",
"The position opens above the top price",
"The position opens below the bottom price",
"The position opens above the bottom price"
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the top price",
"Exit long at the bottom price"
};
else if (slotType == SlotTypes.CloseFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes below the top price",
"The bar closes above the top price",
"The bar closes below the bottom price",
"The bar closes above the bottom price"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Base price";
IndParam.ListParam[1].ItemList = new string[] { "High & Low" };
IndParam.ListParam[1].Index = 0;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "Used price from the indicator.";
IndParam.ListParam[2].Caption = "Base period";
IndParam.ListParam[2].ItemList = new string[] { "Previous bar", "Previous day", "Previous week", "Previous month" };
IndParam.ListParam[2].Index = 1;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The period, the top/bottom prices are based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "Vertical shift";
IndParam.NumParam[0].Value = 0;
IndParam.NumParam[0].Min = -2000;
IndParam.NumParam[0].Max = +2000;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "A vertical shift above the top and below the bottom price.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Random_Filter(SlotTypes slotType)
{
// General properties
IndicatorName = "Random Filter";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.Additional;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.OpenFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Gives a random entry signal"
}
}
;
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.ListParam[0].ItemList = new string[]
{
"Gives a random exit signal"
}
}
;
else
{
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
}
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
// The NumericUpDown parameters
if (slotType == SlotTypes.OpenFilter)
{
IndParam.NumParam[0].Caption = "Probability";
IndParam.NumParam[0].Value = 80;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 100;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The probability to allow a new position opening in %.";
IndParam.NumParam[1].Caption = "Long vs short";
IndParam.NumParam[1].Value = 50;
IndParam.NumParam[1].Min = 0;
IndParam.NumParam[1].Max = 100;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The probability to open Long vs. short in %.";
}
else if (slotType == SlotTypes.CloseFilter)
{
IndParam.NumParam[0].Caption = "Probability";
IndParam.NumParam[0].Value = 20;
IndParam.NumParam[0].Min = 0;
IndParam.NumParam[0].Max = 100;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The probability to close the position in %.";
}
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Bollinger_Bands(SlotTypes slotType)
{
// General properties
IndicatorName = "Bollinger Bands";
PossibleSlots = SlotTypes.Open | SlotTypes.OpenFilter | SlotTypes.Close | SlotTypes.CloseFilter;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
if (slotType == SlotTypes.Open)
IndParam.ListParam[0].ItemList = new string[]
{
"Enter long at the Upper Band",
"Enter long at the Lower Band"
};
else if (slotType == SlotTypes.OpenFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar opens below the Upper Band",
"The bar opens above the Upper Band",
"The bar opens below the Lower Band",
"The bar opens above the Lower Band",
"The position opens below the Upper Band",
"The position opens above the Upper Band",
"The position opens below the Lower Band",
"The position opens above the Lower Band",
"The bar opens below the Upper Band after opening above it",
"The bar opens above the Upper Band after opening below it",
"The bar opens below the Lower Band after opening above it",
"The bar opens above the Lower Band after opening below it"
};
else if (slotType == SlotTypes.Close)
IndParam.ListParam[0].ItemList = new string[]
{
"Exit long at the Upper Band",
"Exit long at the Lower Band"
};
else if (slotType == SlotTypes.CloseFilter)
IndParam.ListParam[0].ItemList = new string[]
{
"The bar closes below the Upper Band",
"The bar closes above the Upper Band",
"The bar closes below the Lower Band",
"The bar closes above the Lower Band"
};
else
IndParam.ListParam[0].ItemList = new string[]
{
"Not Defined"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the indicator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The method of smoothing of central Moving Average.";
IndParam.ListParam[2].Caption = "Base price";
IndParam.ListParam[2].ItemList = Enum.GetNames(typeof(BasePrice));
IndParam.ListParam[2].Index = (int)BasePrice.Close;
IndParam.ListParam[2].Text = IndParam.ListParam[2].ItemList[IndParam.ListParam[2].Index];
IndParam.ListParam[2].Enabled = true;
IndParam.ListParam[2].ToolTip = "The price the central Moving Average is based on.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "MA period";
IndParam.NumParam[0].Value = 20;
IndParam.NumParam[0].Min = 2;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The central Moving Average period.";
IndParam.NumParam[1].Caption = "Multiplier";
IndParam.NumParam[1].Value = 2;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 5;
IndParam.NumParam[1].Point = 2;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "Determines the width of Bollinger Bands.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
/// <summary>
/// Sets the default indicator parameters for the designated slot type
/// </summary>
public Oscillator_of_ATR(SlotTypes slotType)
{
// General properties
IndicatorName = "Oscillator of ATR";
PossibleSlots = SlotTypes.OpenFilter | SlotTypes.CloseFilter;
SeparatedChart = true;
// Setting up the indicator parameters
IndParam = new IndicatorParam();
IndParam.IndicatorName = IndicatorName;
IndParam.SlotType = slotType;
IndParam.IndicatorType = TypeOfIndicator.OscillatorOfIndicators;
// The ComboBox parameters
IndParam.ListParam[0].Caption = "Logic";
IndParam.ListParam[0].ItemList = new string[]
{
"The Oscillator rises",
"The Oscillator falls",
"The Oscillator is higher than the zero line",
"The Oscillator is lower than the zero line",
"The Oscillator crosses the zero line upward",
"The Oscillator crosses the zero line downward",
"The Oscillator changes its direction upward",
"The Oscillator changes its direction downward"
};
IndParam.ListParam[0].Index = 0;
IndParam.ListParam[0].Text = IndParam.ListParam[0].ItemList[IndParam.ListParam[0].Index];
IndParam.ListParam[0].Enabled = true;
IndParam.ListParam[0].ToolTip = "Logic of application of the oscillator.";
IndParam.ListParam[1].Caption = "Smoothing method";
IndParam.ListParam[1].ItemList = Enum.GetNames(typeof(MAMethod));
IndParam.ListParam[1].Index = (int)MAMethod.Simple;
IndParam.ListParam[1].Text = IndParam.ListParam[1].ItemList[IndParam.ListParam[1].Index];
IndParam.ListParam[1].Enabled = true;
IndParam.ListParam[1].ToolTip = "The Moving Average method used for smoothing the ATR value.";
// The NumericUpDown parameters
IndParam.NumParam[0].Caption = "First ATR period";
IndParam.NumParam[0].Value = 10;
IndParam.NumParam[0].Min = 1;
IndParam.NumParam[0].Max = 200;
IndParam.NumParam[0].Enabled = true;
IndParam.NumParam[0].ToolTip = "The period of first ATR.";
IndParam.NumParam[1].Caption = "Second ATR period";
IndParam.NumParam[1].Value = 14;
IndParam.NumParam[1].Min = 1;
IndParam.NumParam[1].Max = 200;
IndParam.NumParam[1].Enabled = true;
IndParam.NumParam[1].ToolTip = "The period of second ATR.";
// The CheckBox parameters
IndParam.CheckParam[0].Caption = "Use previous bar value";
IndParam.CheckParam[0].Checked = PrepareUsePrevBarValueCheckBox(slotType);
IndParam.CheckParam[0].Enabled = true;
IndParam.CheckParam[0].ToolTip = "Use the indicator value from the previous bar.";
return;
}
