private static CanvasGeometry CreateStarCore(ICanvasResourceCreator resourceCreator, int points, float innerRadius, Matrix3x2 oneMatrix)
{
float rotation = TransformerGeometry.StartingRotation;
float angle = FanKit.Math.Pi / points;
Vector2[] array = new Vector2[points * 2];
for (int i = 0; i < points; i++)
{
int index = i * 2;
// Outer
Vector2 outer = TransformerGeometry.GetRotationVector(rotation);
Vector2 outerTransform = Vector2.Transform(outer, oneMatrix);
array[index] = outerTransform;
rotation += angle;
// Inner
Vector2 inner = TransformerGeometry.GetRotationVector(rotation);
Vector2 inner2 = inner * innerRadius;
Vector2 inner2Transform = Vector2.Transform(inner2, oneMatrix);
array[index + 1] = inner2Transform;
rotation += angle;
}
return(CanvasGeometry.CreatePolygon(resourceCreator, array));
}
/// <summary>
/// Create a new cookie geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="innerRadius"> The inner-radius. </param>
/// <param name="sweepAngle"> The sweep-angle. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateCookie(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, float innerRadius, float sweepAngle)
{
bool zeroInnerRadius = innerRadius == 0;
bool zeroSweepAngle = sweepAngle == 0;
if (zeroSweepAngle)
{
CanvasGeometry ellipse = TransformerGeometry.CreateEllipse(resourceCreator, transformer, matrix);
if (zeroInnerRadius)
{
return(ellipse);
}
else
{
Vector2 center = Vector2.Transform(transformer.Center, matrix);
return(TransformerGeometry.CreateDountCore(ellipse, innerRadius, center));
}
}
else
{
Matrix3x2 oneMatrix = Transformer.FindHomography(Transformer.One, transformer);
Matrix3x2 oneMatrix2 = oneMatrix * matrix;
if (zeroInnerRadius)
{
return(TransformerGeometry.CreatePieCore(resourceCreator, oneMatrix2, sweepAngle));
}
else
{
return(TransformerGeometry.CreateCookieCore(resourceCreator, oneMatrix2, innerRadius, sweepAngle));
}
}
}
/// <summary>
/// Create a new capsule geometry.
/// </summary>
/// <param name="resourceCreator"> The resource - creator. </param>
/// <param name="transformer"> The ITransformer - LTRB. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateCapsule(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer)
{
Vector2 centerLeft = transformer.CenterLeft;
Vector2 centerTop = transformer.CenterTop;
Vector2 centerRight = transformer.CenterRight;
Vector2 centerBottom = transformer.CenterBottom;
// Horizontal
Vector2 horizontal = transformer.Horizontal;
float horizontalLength = horizontal.Length();
Vector2 horizontalUnit = horizontal / horizontalLength;
// Vertical
Vector2 vertical = transformer.Vertical;
float verticalLength = vertical.Length();
if (horizontalLength < verticalLength)
{
return(TransformerGeometry.CreateEllipse(resourceCreator, transformer));
}
return(TransformerGeometry.CreateCapsuleCore(resourceCreator,
verticalLength,
horizontalUnit,
centerTop,
centerLeft,
centerRight,
centerBottom,
transformer.LeftTop,
transformer.RightTop,
transformer.RightBottom,
transformer.LeftBottom
));
}
private static CanvasGeometry CreateCookieCore(ICanvasResourceCreator resourceCreator, Matrix3x2 oneMatrix, float innerRadius, float sweepAngle)
{
// start tooth
Vector2 startTooth = new Vector2(1, 0);
// end tooth
Vector2 endTooth = TransformerGeometry.GetRotationVector(sweepAngle);
CanvasPathBuilder pathBuilder = new CanvasPathBuilder(resourceCreator);
CanvasArcSize canvasArcSize = (sweepAngle < System.Math.PI) ? CanvasArcSize.Large : CanvasArcSize.Small;
{
// DonutAndCookie
// start notch
Vector2 startNotch = startTooth * innerRadius;
// end notch
Vector2 endNotch = endTooth * innerRadius;
// start tooth point
pathBuilder.BeginFigure(startNotch);
// start notch point
pathBuilder.AddArc(endNotch, innerRadius, innerRadius, sweepAngle, CanvasSweepDirection.CounterClockwise, canvasArcSize);
}
// end notch point
pathBuilder.AddLine(endTooth);
// end tooth point
pathBuilder.AddArc(startTooth, 1, 1, sweepAngle, CanvasSweepDirection.Clockwise, canvasArcSize);
pathBuilder.EndFigure(CanvasFigureLoop.Closed);
return(CanvasGeometry.CreatePath(pathBuilder).Transform(oneMatrix));
}
/// <summary>
/// Create a new cog geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="count"> The point count. </param>
/// <param name="innerRadius"> The inner-radius. </param>
/// <param name="tooth"> The tooth. </param>
/// <param name="notch"> The notch. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateCog(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, int count, float innerRadius, float tooth, float notch)
{
Matrix3x2 oneMatrix = Transformer.FindHomography(Transformer.One, transformer);
Matrix3x2 oneMatrix2 = oneMatrix * matrix;
return(TransformerGeometry.CreateCogCore(resourceCreator, count, innerRadius, tooth, notch, oneMatrix2));
}
/// <summary>
/// Create a new star geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="points"> The point count. </param>
/// <param name="innerRadius"> The inner-radius. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateStar(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, int points, float innerRadius)
{
Matrix3x2 oneMatrix = Transformer.FindHomography(Transformer.One, transformer);
Matrix3x2 oneMatrix2 = oneMatrix * matrix;
return(TransformerGeometry.CreateStarCore(resourceCreator, points, innerRadius, oneMatrix2));
}
/// <summary>
/// Create a new heart geometry.
/// </summary>
/// <param name="resourceCreator"> The resource - creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="spread"> The spread. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateHeart(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, float spread)
{
Matrix3x2 oneMatrix = Transformer.FindHomography(Transformer.One, transformer);
Matrix3x2 oneMatrix2 = oneMatrix * matrix;
return(TransformerGeometry.CreateHeartCore(resourceCreator, spread, oneMatrix2));
}
/// <summary>
/// Create a new diamond geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="mid"> The mid value. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateDiamond(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, float mid)
{
return(TransformerGeometry.CreateDiamondCore(resourceCreator,
Vector2.Transform(transformer.LeftTop, matrix),
Vector2.Transform(transformer.RightTop, matrix),
Vector2.Transform(transformer.RightBottom, matrix),
Vector2.Transform(transformer.LeftBottom, matrix),
Vector2.Transform(transformer.CenterLeft, matrix),
Vector2.Transform(transformer.CenterRight, matrix),
mid
));
}
/// <summary>
/// Create a new diamond geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="mid"> The mid value. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateDiamond(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, float mid)
{
return(TransformerGeometry.CreateDiamondCore(resourceCreator,
transformer.LeftTop,
transformer.RightTop,
transformer.RightBottom,
transformer.LeftBottom,
transformer.CenterLeft,
transformer.CenterRight,
mid
));
}
/// <summary>
/// Create a new pie geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="sweepAngle"> The sweep-angle. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreatePie(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, float sweepAngle)
{
bool zeroSweepAngle = sweepAngle == 0;
if (zeroSweepAngle)
{
return(TransformerGeometry.CreateEllipse(resourceCreator, transformer));
}
else
{
Matrix3x2 oneMatrix = Transformer.FindHomography(Transformer.One, transformer);
return(TransformerGeometry.CreatePieCore(resourceCreator, oneMatrix, sweepAngle));
}
}
/// <summary>
/// Create a new dount geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="matrix"> The matrix. </param>
/// <param name="holeRadius"> The hole-radius. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateDount(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, float holeRadius)
{
bool zeroHoleRadius = holeRadius == 0;
CanvasGeometry outter = TransformerGeometry.CreateEllipse(resourceCreator, transformer, matrix);
if (zeroHoleRadius)
{
return(outter);
}
else
{
Vector2 center = Vector2.Transform(transformer.Center, matrix);
return(TransformerGeometry.CreateDountCore(outter, holeRadius, center));
}
}
/// <summary>
/// Create a new round rect geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="matrix"> The matrix. </param>
/// <param name="corner"> The corner. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateRoundRect(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, float corner)
{
return(TransformerGeometry.CreateRoundRectCore
(
resourceCreator,
Vector2.Transform(transformer.LeftTop, matrix),
Vector2.Transform(transformer.RightTop, matrix),
Vector2.Transform(transformer.RightBottom, matrix),
Vector2.Transform(transformer.LeftBottom, matrix),
Vector2.Transform(transformer.CenterLeft, matrix),
Vector2.Transform(transformer.CenterTop, matrix),
Vector2.Transform(transformer.CenterRight, matrix),
Vector2.Transform(transformer.CenterBottom, matrix),
corner
));
}
/// <summary>
/// Create a new round rect geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="corner"> The corner. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateRoundRect(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, float corner)
{
return(TransformerGeometry.CreateRoundRectCore
(
resourceCreator,
transformer.LeftTop,
transformer.RightTop,
transformer.RightBottom,
transformer.LeftBottom,
transformer.CenterLeft,
transformer.CenterTop,
transformer.CenterRight,
transformer.CenterBottom,
corner
));
}
/// <summary>
/// Create a new arrow geometry.
/// </summary>
/// <param name="resourceCreator"> The resource - creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="matrix"> The matrix. </param>
/// <param name="isAbsolute"> Is absolute? </param>
/// <param name="width"> The absolute width. </param>
/// <param name="value"> The relative value. </param>
/// <param name="leftTail"> The left - tail. </param>
/// <param name="rightTail"> The right - tail. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateArrow(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix, bool isAbsolute = false, float width = 10, float value = 0.5f, GeometryArrowTailType leftTail = GeometryArrowTailType.None, GeometryArrowTailType rightTail = GeometryArrowTailType.Arrow)
{
Vector2 center = Vector2.Transform(transformer.Center, matrix);
Vector2 centerLeft = Vector2.Transform(transformer.CenterLeft, matrix);
Vector2 centerRight = Vector2.Transform(transformer.CenterRight, matrix);
// horizontal
Vector2 horizontal = transformer.Horizontal;
float horizontalLength = horizontal.Length();
// vertical
Vector2 vertical = transformer.Vertical;
float verticalLength = vertical.Length();
Vector2 widthVector = TransformerGeometry.GetArrowWidthVector(isAbsolute, width, value, vertical, verticalLength);
Vector2 focusVector = TransformerGeometry.GetArrowFocusVector(verticalLength, horizontalLength, horizontal);
Vector2 leftFocusTransform = Vector2.Transform(transformer.CenterLeft + focusVector, matrix);
Vector2 rightFocusTransform = Vector2.Transform(transformer.CenterRight - focusVector, matrix);
return(TransformerGeometry.CreateArrowCore
(
resourceCreator,
Vector2.Transform(widthVector + transformer.Center, matrix) - center,
// Left
centerLeft,
Vector2.Transform(transformer.LeftBottom, matrix),
Vector2.Transform(transformer.LeftTop, matrix),
(leftFocusTransform - centerLeft),
leftFocusTransform,
// Right
centerRight,
Vector2.Transform(transformer.RightBottom, matrix),
Vector2.Transform(transformer.RightTop, matrix),
(rightFocusTransform - centerRight),
rightFocusTransform,
leftTail, rightTail
));
}
private static CanvasGeometry CreateHeartCore(ICanvasResourceCreator resourceCreator, float spread, Matrix3x2 oneMatrix)
{
Vector2 bottom = new Vector2(0, 1);
Vector2 leftBottom = new Vector2(-0.84f, 0.178f);
Vector2 leftBottom2 = leftBottom + new Vector2(-0.2f, -0.2f);
Vector2 leftTop = new Vector2(-0.84f, -0.6f);
Vector2 leftTop1 = leftTop + new Vector2(-0.2f, 0.2f);
Vector2 leftTop2 = leftTop + new Vector2(0.2f, -0.2f);
Vector2 top1 = new Vector2(-0.2f, -0.8f);
Vector2 topSpread = TransformerGeometry.HeartTopSpread(spread);
Vector2 top2 = new Vector2(0.2f, -0.8f);
Vector2 rightTop = new Vector2(0.84f, -0.6f);
Vector2 rightTop1 = rightTop + new Vector2(-0.2f, -0.2f);
Vector2 rightTop2 = rightTop + new Vector2(0.2f, 0.2f);
Vector2 rightBottom = new Vector2(0.84f, 0.178f);
Vector2 rightBottom1 = rightBottom + new Vector2(0.2f, -0.2f);
// Path
CanvasPathBuilder pathBuilder = new CanvasPathBuilder(resourceCreator);
{
pathBuilder.BeginFigure(bottom);
pathBuilder.AddLine(leftBottom);
pathBuilder.AddCubicBezier(leftBottom2, leftTop1, leftTop);
pathBuilder.AddCubicBezier(leftTop2, top1, topSpread);
pathBuilder.AddCubicBezier(top2, rightTop1, rightTop);
pathBuilder.AddCubicBezier(rightTop2, rightBottom1, rightBottom);
pathBuilder.EndFigure(CanvasFigureLoop.Closed);
}
// Geometry
return(CanvasGeometry.CreatePath(pathBuilder).Transform(oneMatrix));
}
/// <summary>
/// Create a new capsule geometry.
/// </summary>
/// <param name="resourceCreator"> The resource - creator. </param>
/// <param name="transformerLTRB"> The ITransformer - LTRB. </param>
/// <param name="matrix"> The matrix. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreateCapsule(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, Matrix3x2 matrix)
{
Vector2 leftTop = Vector2.Transform(transformer.LeftTop, matrix);
Vector2 rightTop = Vector2.Transform(transformer.RightTop, matrix);
Vector2 rightBottom = Vector2.Transform(transformer.RightBottom, matrix);
Vector2 leftBottom = Vector2.Transform(transformer.LeftBottom, matrix);
Vector2 centerLeft = Vector2.Transform(transformer.CenterLeft, matrix);
Vector2 centerTop = Vector2.Transform(transformer.CenterTop, matrix);
Vector2 centerRight = Vector2.Transform(transformer.CenterRight, matrix);
Vector2 centerBottom = Vector2.Transform(transformer.CenterBottom, matrix);
// Horizontal
Vector2 horizontal = (centerRight - centerLeft);
float horizontalLength = horizontal.Length();
Vector2 horizontalUnit = horizontal / horizontalLength;
// Vertical
Vector2 vertical = (centerBottom - centerTop);
float verticalLength = vertical.Length();
if (horizontalLength < verticalLength)
{
return(TransformerGeometry.CreateEllipse(resourceCreator, transformer, matrix));
}
return(TransformerGeometry.CreateCapsuleCore(resourceCreator,
verticalLength,
horizontalUnit,
centerTop,
centerLeft,
centerRight,
centerBottom,
leftTop,
rightTop,
rightBottom,
leftBottom));
}
/// <summary> /// Turn to geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <returns> The product geometry. </returns> public CanvasGeometry ToRectangle(ICanvasResourceCreator resourceCreator) => TransformerGeometry.CreateRectangle(resourceCreator, this);
/// <summary> /// Create a new triangle geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="transformerLTRB"> The ITransformer-LTRB. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateTriangle(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformerLTRB, float center) => TransformerGeometry.CreateTriangleCore(resourceCreator, transformerLTRB.LeftTop, transformerLTRB.RightTop, transformerLTRB.RightBottom, transformerLTRB.LeftBottom, center);
/// <summary>
/// Create a new pentagon geometry.
/// </summary>
/// <param name="resourceCreator"> The resource-creator. </param>
/// <param name="transformer"> The source transformer. </param>
/// <param name="points"> The points count. </param>
/// <returns> The product geometry. </returns>
public static CanvasGeometry CreatePentagon(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformer, int points)
{
Matrix3x2 oneMatrix = Transformer.FindHomography(Transformer.One, transformer);
return(TransformerGeometry.CreatePentagonCore(resourceCreator, points, oneMatrix));
}
/// <summary> /// Create a new triangle geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="transformerLTRB"> The ITransformer-LTRB. </param> /// <param name="matrix"> The matrix. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateTriangle(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformerLTRB, Matrix3x2 matrix, float center) => TransformerGeometry.CreateTriangleCore(resourceCreator, Vector2.Transform(transformerLTRB.LeftTop, matrix), Vector2.Transform(transformerLTRB.RightTop, matrix), Vector2.Transform(transformerLTRB.RightBottom, matrix), Vector2.Transform(transformerLTRB.LeftBottom, matrix), center);
/// <summary> /// Create a new ellipse geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="transformerLTRB"> The ITransformer-LTRB. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateEllipse(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformerLTRB) => TransformerGeometry.CreateEllipseCore(resourceCreator, transformerLTRB.CenterLeft, transformerLTRB.CenterTop, transformerLTRB.CenterRight, transformerLTRB.CenterBottom);
/// <summary> /// Create a new rectangle geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="leftTop"> The left-top point. </param> /// <param name="rightTop"> The right-top point. </param> /// <param name="rightBottom"> The right-bottom point. </param> /// <param name="leftBottom"> The left-bottom point. </param> /// <param name="matrix"> The matrix. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateRectangle(ICanvasResourceCreator resourceCreator, Vector2 leftTop, Vector2 rightTop, Vector2 rightBottom, Vector2 leftBottom, Matrix3x2 matrix) => TransformerGeometry.CreateRectangleCore(resourceCreator, Vector2.Transform(leftTop, matrix), Vector2.Transform(rightTop, matrix), Vector2.Transform(rightBottom, matrix), Vector2.Transform(leftBottom, matrix));
/// <summary> /// Create a new rectangle geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="leftTop"> The left-top point. </param> /// <param name="rightTop"> The right-top point. </param> /// <param name="rightBottom"> The right-bottom point. </param> /// <param name="leftBottom"> The left-bottom point. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateRectangle(ICanvasResourceCreator resourceCreator, Vector2 leftTop, Vector2 rightTop, Vector2 rightBottom, Vector2 leftBottom) => TransformerGeometry.CreateRectangleCore(resourceCreator, leftTop, rightTop, rightBottom, leftBottom);
/// <summary> /// Create a new rectangle geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="transformerLTRB"> The ITransformer-LTRB. </param> /// <param name="matrix"> The matrix. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateRectangle(ICanvasResourceCreator resourceCreator, ITransformerLTRB transformerLTRB, Matrix3x2 matrix) => TransformerGeometry.CreateRectangle(resourceCreator, transformerLTRB.LeftTop, transformerLTRB.RightTop, transformerLTRB.RightBottom, transformerLTRB.LeftBottom, matrix);
/// <summary> /// Create a new ellipse geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="centerLeft"> The left point. </param> /// <param name="centerTop"> The top point. </param> /// <param name="centerRight"> The right point. </param> /// <param name="centerBottom"> The bottom point. </param> /// <param name="matrix"> The matrix. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateEllipse(ICanvasResourceCreator resourceCreator, Vector2 centerLeft, Vector2 centerTop, Vector2 centerRight, Vector2 centerBottom, Matrix3x2 matrix) => TransformerGeometry.CreateEllipseCore(resourceCreator, Vector2.Transform(centerLeft, matrix), Vector2.Transform(centerTop, matrix), Vector2.Transform(centerRight, matrix), Vector2.Transform(centerBottom, matrix));
/// <summary> /// Create a new ellipse geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="centerLeft"> The left point. </param> /// <param name="centerTop"> The top point. </param> /// <param name="centerRight"> The right point. </param> /// <param name="centerBottom"> The bottom point. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateEllipse(ICanvasResourceCreator resourceCreator, Vector2 centerLeft, Vector2 centerTop, Vector2 centerRight, Vector2 centerBottom) => TransformerGeometry.CreateEllipseCore(resourceCreator, centerLeft, centerTop, centerRight, centerBottom);
/// <summary> /// Turn to geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="matrix"> The matrix. </param> /// <returns></returns> public CanvasGeometry ToEllipse(ICanvasResourceCreator resourceCreator, Matrix3x2 matrix) => TransformerGeometry.CreateEllipse(resourceCreator, this, matrix);
/// <summary> /// Turn to geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <returns></returns> public CanvasGeometry ToEllipse(ICanvasResourceCreator resourceCreator) => TransformerGeometry.CreateEllipse(resourceCreator, this);
/// <summary> /// Turn to geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="matrix"> The matrix. </param> /// <returns> The product geometry. </returns> public CanvasGeometry ToRectangle(ICanvasResourceCreator resourceCreator, Matrix3x2 matrix) => TransformerGeometry.CreateRectangle(resourceCreator, this, matrix);
/// <summary> /// Create a new triangle geometry. /// </summary> /// <param name="resourceCreator"> The resource-creator. </param> /// <param name="leftTop"> The left-top point. </param> /// <param name="rightTop"> The right-top point. </param> /// <param name="rightBottom"> The right-bottom point. </param> /// <param name="leftBottom"> The left-bottom point. </param> /// <returns> The product geometry. </returns> public static CanvasGeometry CreateTriangle(ICanvasResourceCreator resourceCreator, Vector2 leftTop, Vector2 rightTop, Vector2 rightBottom, Vector2 leftBottom, float center) => TransformerGeometry.CreateTriangleCore(resourceCreator, leftTop, rightTop, rightBottom, leftBottom, center);
