private void cmdReadWithReadValue_Click(object sender, EventArgs e)
{
try
{
txtWert.Text = "";
txtZeit.Text = "";
lblStatus.Text = "";
if (myConn == null)
{
cmdConnect_Click(sender, e);
}
PLCTag myTag = new PLCTag(txtTag.Text);
Stopwatch sw = new Stopwatch();
sw.Start();
myConn.ReadValue(myTag);
sw.Stop();
txtZeit.Text = sw.ElapsedMilliseconds.ToString() + " ms";
txtWert.Text = myTag.ValueAsString;
}
catch (Exception ex)
{
lblStatus.Text = ex.Message;
}
}
public List <ToolData> GetToolList()
{
//toolData = new List<ToolData>();
bool error = false;
Stopwatch sw = new Stopwatch();
sw.Start();
if (myConn == null)
{
DoConnect();
}
// Meherere Datenbausteine müssen eingelesen werden
/////////////////////////////////////////////////////
// Beginn mit Datenbaustein TP (MagazinPlatzdaten):
List <ToolData> toolData = new List <ToolData>();
PLCNckTag tag = new PLCNckTag();
// Anzahl der Werkzeuge
tag.NckArea = NCK_Area.AreaTool;
tag.NckModule = (int)NCK_Block.BlockTV;
tag.NckLinecount = 1;
tag.NckUnit = 1;
tag.NckLine = 1;
tag.NckColumn = 1;
tag.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
myConn.ReadValue(tag);
ushort numberOfTools = 0;
object o = new object();
numberOfTools = (UInt16)tag.Value;
List <PLCNckTag> tagList = new List <PLCNckTag>();
int line = 1;
for (int i = 0; i < numberOfTools; i++)
{
try
{
//--------------------- InternalNumber Tno -------------------------------
PLCNckTag internalToolNumber = new PLCNckTag();
internalToolNumber.NckArea = NCK_Area.AreaTool;
internalToolNumber.NckModule = (int)NCK_Block.BlockTV;
internalToolNumber.NckLinecount = 1;
internalToolNumber.NckUnit = 1;
internalToolNumber.NckLine = line;
internalToolNumber.NckColumn = (int)NCK_BlockTVColumn.TNo;
internalToolNumber.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
internalToolNumber.Tag = "InternalToolNumber";
tagList.Add(internalToolNumber);
//--------------------- IdentNumber -------------------------------
PLCNckTag identNumber = new PLCNckTag();
identNumber.NckArea = NCK_Area.AreaTool;
identNumber.NckModule = (int)NCK_Block.BlockTV;
identNumber.NckLinecount = 1;
identNumber.NckUnit = 1;
identNumber.NckLine = line;
identNumber.NckColumn = (int)NCK_BlockTVColumn.Identnumber;
identNumber.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.CharArray;
identNumber.ArraySize = 32;
identNumber.Tag = "ToolIdentNumber";
tagList.Add(identNumber);
//--------------------- Duplo -------------------------------
PLCNckTag duploNumber = new PLCNckTag();
duploNumber.NckArea = NCK_Area.AreaTool;
duploNumber.NckModule = (int)NCK_Block.BlockTV;
duploNumber.NckLinecount = 1;
duploNumber.NckUnit = 1;
duploNumber.NckLine = line;
duploNumber.NckColumn = (int)NCK_BlockTVColumn.Duplo;
duploNumber.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
duploNumber.Tag = "Duplo";
tagList.Add(duploNumber);
//--------------------- Edges -------------------------------
PLCNckTag edges = new PLCNckTag();
edges.NckArea = NCK_Area.AreaTool;
edges.NckModule = (int)NCK_Block.BlockTV;
edges.NckLinecount = 1;
edges.NckUnit = 1;
edges.NckLine = line;
edges.NckColumn = (int)NCK_BlockTVColumn.Edges;
edges.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
edges.Tag = "Edges";
tagList.Add(edges);
//--------------------- Depot -------------------------------
PLCNckTag depot = new PLCNckTag();
depot.NckArea = NCK_Area.AreaTool;
depot.NckModule = (int)NCK_Block.BlockTV;
depot.NckLinecount = 1;
depot.NckUnit = 1;
depot.NckLine = line;
depot.NckColumn = (int)NCK_BlockTVColumn.Depot;
depot.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
depot.Tag = "Depot";
tagList.Add(depot);
//--------------------- Place -------------------------------
PLCNckTag place = new PLCNckTag();
place.NckArea = NCK_Area.AreaTool;
place.NckModule = (int)NCK_Block.BlockTV;
place.NckLinecount = 1;
place.NckUnit = 1;
place.NckLine = line;
place.NckColumn = (int)NCK_BlockTVColumn.Place;
place.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
place.Tag = "Place";
tagList.Add(place);
++line;
}
catch (Exception ex)
{
}
}
//PLCNckTag p = new PLCNckTag();
//p.NckArea = (int)NCK_Area.AreaTool;
//p.NckModule = (int)NCK_Block.BlockTV;
//p.NckLinecount = 1;
//p.NckUnit = 1;
//p.NckLine = 1;
//p.NckColumn = (int)NCK_BlockTVColumn.Place;
//p.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.Word;
//p.Tag = "Place";
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
//tagList.Add(p);
myConn.ReadValues(tagList);
foreach (var nckTag in tagList)
{
if (nckTag.Tag != null)
{
ToolData td = toolData.Where(w => w.Id == nckTag.NckLine).FirstOrDefault();
if (td == null)
{
td = new ToolData();
td.Id = nckTag.NckLine;
toolData.Add(td);
}
PropertyInfo prop = typeof(ToolData).GetProperty(nckTag.Tag.ToString(), BindingFlags.Public | BindingFlags.Instance);
if (null != prop && prop.CanWrite)
{
try
{
prop.SetValue(td, Convert.ChangeType(nckTag.Value, prop.PropertyType), null);
}catch {}
}
}
}
tagList = new List <PLCNckTag>();
foreach (var td in toolData)
{
/////////////////////////////////////////////////////////
////// Beginn mit Datenbaustein TS (Schneidedaten, Korrekturdaten):
// //P1 = Vorwarngrenze Standzeit in Minuten ($TC_MOP1)
// //P2 = Verbleibende Standzeit in Minuten ($TC_MOP2)
// //P3 = Vorwarngrenze Stückzahl ($TC_MOP3)
// //P4 = verbleibende Stückzahl ($TC_MOP4)
// //P5 = Sollstandzeit ($TC_MOP11)
// //P6 = Sollstückzahl ($TC_MOP13)
// //P7 = Vorwarngrenze Verschleiß (Vorwarngrenze) (ab SW 5.1) ($TC_MOP5)
// // Dieser Parameter kann nur gesetzt werden, wenn Bit 5 von Maschinendatum $MN_MM_TOOL_MANAGEMENT_MASK entsprechend gesetzt ist.
// //P8 = verbleibender Verschleiß (Istwert) (ab SW 5.1) ($TC_MOP6) nicht schreibbar
// //P9 = Sollwert Verschleiß (ab SW 5.1) ($TC_MOP15)
// // Dieser Parameter kann nur gesetzt werden, wenn Bit 5 von Maschinendatum
// // $MN_MM_TOOL_MANAGEMENT_MASK entsprechend gesetzt ist.
PLCNckTag restdurabillity = new PLCNckTag();
restdurabillity.NckArea = NCK_Area.AreaTool;
restdurabillity.NckModule = (int)NCK_Block.BlockTS;
restdurabillity.NckLinecount = 1;
restdurabillity.NckUnit = 1;
restdurabillity.NckLine = (int)NCK_BlockTSLine.Resdurabillity;
restdurabillity.NckColumn = int.Parse(td.InternalToolNumber);
restdurabillity.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.LReal;
restdurabillity.Tag = "RestDurability";
tagList.Add(restdurabillity);
PLCNckTag setTime = new PLCNckTag();
setTime.NckArea = NCK_Area.AreaTool;
setTime.NckModule = (int)NCK_Block.BlockTS;
setTime.NckLinecount = 1;
setTime.NckUnit = 1;
setTime.NckLine = (int)NCK_BlockTSLine.SetTime;
setTime.NckColumn = int.Parse(td.InternalToolNumber);
setTime.TagDataType = DotNetSiemensPLCToolBoxLibrary.DataTypes.TagDataType.LReal;
setTime.Tag = "MaxTime";
tagList.Add(setTime);
}
myConn.ReadValues(tagList);
foreach (var nckTag in tagList)
{
if (nckTag.Tag != null)
{
ToolData td = toolData.Where(w => w.InternalToolNumber == nckTag.NckColumn.ToString()).FirstOrDefault();
if (td != null)
{
PropertyInfo prop = typeof(ToolData).GetProperty(nckTag.Tag.ToString(), BindingFlags.Public | BindingFlags.Instance);
if (null != prop && prop.CanWrite)
{
try
{
if (prop.PropertyType == typeof(TimeSpan))
{
TimeSpan ts = TimeSpan.FromSeconds(double.Parse(nckTag.Value.ToString()));
prop.SetValue(td, ts, null);
}
else
{
prop.SetValue(td, Convert.ChangeType(nckTag.Value, prop.PropertyType), null);
}
}
catch
{
}
}
}
}
}
if (error)
{
Console.WriteLine("Error GetTools in Aglink happened");
}
sw.Stop();
lblStatus.Text = sw.ElapsedMilliseconds.ToString() + " ms";
if (toolData != null)
{
dataGridView1.DataSource = toolData;
}
return(toolData);
}