private void CleanUp()
{
foreach (var lodData in _lodDatas)
{
lodData.OnDisable();
}
_lodDatas.Clear();
#if UNITY_EDITOR
if (!EditorApplication.isPlaying && Root != null)
{
DestroyImmediate(Root.gameObject);
}
else
#endif
if (Root != null)
{
Destroy(Root.gameObject);
}
Root = null;
_lodTransform = null;
_lodDataAnimWaves = null;
_lodDataClipSurface = null;
_lodDataDynWaves = null;
_lodDataFlow = null;
_lodDataFoam = null;
_lodDataSeaDepths = null;
_lodDataShadow = null;
}
protected override void SetAdditionalSimParams(IPropertyWrapper simMaterial)
{
base.SetAdditionalSimParams(simMaterial);
simMaterial.SetFloat(sp_Damping, Settings._damping);
simMaterial.SetFloat(sp_Gravity, OceanRenderer.Instance.Gravity * Settings._gravityMultiplier);
float laplacianKernelAngle = _rotateLaplacian ? Mathf.PI * 2f * Random.value : 0f;
simMaterial.SetVector(sp_LaplacianAxisX, new Vector2(Mathf.Cos(laplacianKernelAngle), Mathf.Sin(laplacianKernelAngle)));
// assign sea floor depth - to slot 1 current frame data. minor bug here - this depth will actually be from the previous frame,
// because the depth is scheduled to render just before the animated waves, and this sim happens before animated waves.
if (OceanRenderer.Instance._lodDataSeaDepths != null)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(simMaterial);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(simMaterial);
}
if (OceanRenderer.Instance._lodDataFlow != null)
{
OceanRenderer.Instance._lodDataFlow.BindResultData(simMaterial);
}
else
{
LodDataMgrFlow.BindNull(simMaterial);
}
}
protected override void SetAdditionalSimParams(int lodIdx, IPropertyWrapper simMaterial)
{
base.SetAdditionalSimParams(lodIdx, simMaterial);
simMaterial.SetFloat(sp_FoamFadeRate, Settings._foamFadeRate);
simMaterial.SetFloat(sp_WaveFoamStrength, Settings._waveFoamStrength);
simMaterial.SetFloat(sp_WaveFoamCoverage, Settings._waveFoamCoverage);
simMaterial.SetFloat(sp_ShorelineFoamMaxDepth, Settings._shorelineFoamMaxDepth);
simMaterial.SetFloat(sp_ShorelineFoamStrength, Settings._shorelineFoamStrength);
// assign animated waves - to slot 1 current frame data
OceanRenderer.Instance._lodDataAnimWaves.BindResultData(lodIdx, 1, simMaterial);
// assign sea floor depth - to slot 1 current frame data
if (OceanRenderer.Instance._lodDataSeaDepths)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(lodIdx, 1, simMaterial);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(1, simMaterial);
}
// assign flow - to slot 1 current frame data
if (OceanRenderer.Instance._lodDataFlow)
{
OceanRenderer.Instance._lodDataFlow.BindResultData(lodIdx, 1, simMaterial);
}
else
{
LodDataMgrFlow.BindNull(1, simMaterial);
}
}
protected override void SetAdditionalSimParams(int lodIdx, Material simMaterial)
{
base.SetAdditionalSimParams(lodIdx, simMaterial);
simMaterial.SetFloat("_Damping", Settings._damping);
simMaterial.SetFloat("_Gravity", OceanRenderer.Instance.Gravity);
float laplacianKernelAngle = _rotateLaplacian ? Mathf.PI * 2f * Random.value : 0f;
simMaterial.SetVector("_LaplacianAxisX", new Vector2(Mathf.Cos(laplacianKernelAngle), Mathf.Sin(laplacianKernelAngle)));
// assign sea floor depth - to slot 1 current frame data. minor bug here - this depth will actually be from the previous frame,
// because the depth is scheduled to render just before the animated waves, and this sim happens before animated waves.
if (OceanRenderer.Instance._createSeaFloorDepthData)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(lodIdx, 1, simMaterial);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(1, simMaterial);
}
if (OceanRenderer.Instance._createFlowSim)
{
OceanRenderer.Instance._lodDataFlow.BindResultData(lodIdx, 1, simMaterial);
}
else
{
LodDataMgrFlow.BindNull(1, simMaterial);
}
}
private void LateUpdate()
{
if (OceanRenderer.Instance == null)
{
_rend.enabled = false;
return;
}
float heightOffset = OceanRenderer.Instance.ViewerHeightAboveWater;
// Disable skirt when camera not close to water. In the first few frames collision may not be avail, in that case no choice
// but to assume enabled. In the future this could detect if camera is far enough under water, render a simple quad to avoid
// finding the intersection line.
_rend.enabled = heightOffset < _maxHeightAboveWater;
if (_rend.enabled)
{
if (_copyParamsEachFrame)
{
_rend.material.CopyPropertiesFromMaterial(OceanRenderer.Instance.OceanMaterial);
}
// Assign lod0 shape - trivial but bound every frame because lod transform comes from here
if (_mpb == null)
{
_mpb = new PropertyWrapperMPB();
}
_rend.GetPropertyBlock(_mpb.materialPropertyBlock);
// Underwater rendering uses displacements for intersecting the waves with the near plane, and ocean depth/shadows for ScatterColour()
_mpb.SetInt(LodDataMgr.sp_LD_SliceIndex, 0);
OceanRenderer.Instance._lodDataAnimWaves.BindResultData(_mpb);
if (OceanRenderer.Instance._lodDataSeaDepths)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(_mpb);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(_mpb);
}
if (OceanRenderer.Instance._lodDataShadow)
{
OceanRenderer.Instance._lodDataShadow.BindResultData(_mpb);
}
else
{
LodDataMgrShadow.BindNull(_mpb);
}
_mpb.SetFloat(sp_HeightOffset, heightOffset);
_mpb.SetVector(sp_InstanceData, new Vector4(OceanRenderer.Instance.ViewerAltitudeLevelAlpha, 0f, 0f, OceanRenderer.Instance.CurrentLodCount));
_rend.SetPropertyBlock(_mpb.materialPropertyBlock);
}
}
private void LateUpdate()
{
#if UNITY_EDITOR
// We don't run in "prefab scenes", i.e. when editing a prefab. Bail out if prefab scene is detected.
if (PrefabStageUtility.GetCurrentPrefabStage() != null)
{
return;
}
#endif
if (OceanRenderer.Instance == null || !ShowEffect())
{
_rend.enabled = false;
return;
}
// Pass true in last arg for a crap reason - in edit mode LateUpdate can be called very frequently, and the height sampler mistakenly thinks
// this is erroneous and complains.
_sampleWaterHeight.Init(transform.position, 0f, true);
_sampleWaterHeight.Sample(out var waterHeight);
float heightOffset = transform.position.y - waterHeight;
// Disable skirt when camera not close to water. In the first few frames collision may not be avail, in that case no choice
// but to assume enabled. In the future this could detect if camera is far enough under water, render a simple quad to avoid
// finding the intersection line.
_rend.enabled = heightOffset < _maxHeightAboveWater;
if (_rend.enabled)
{
// Only execute when playing to stop CopyPropertiesFromMaterial from corrupting and breaking the material.
if (!isMeniscus && _copyParamsEachFrame)
{
_rend.material.CopyPropertiesFromMaterial(OceanRenderer.Instance.OceanMaterial);
}
// Assign lod0 shape - trivial but bound every frame because lod transform comes from here
if (_mpb == null)
{
_mpb = new PropertyWrapperMPB();
}
_rend.GetPropertyBlock(_mpb.materialPropertyBlock);
// Underwater rendering uses displacements for intersecting the waves with the near plane, and ocean depth/shadows for ScatterColour()
_mpb.SetInt(LodDataMgr.sp_LD_SliceIndex, 0);
LodDataMgrAnimWaves.Bind(_mpb);
LodDataMgrSeaFloorDepth.Bind(_mpb);
LodDataMgrShadow.Bind(_mpb);
_mpb.SetFloat(sp_HeightOffset, heightOffset);
_rend.SetPropertyBlock(_mpb.materialPropertyBlock);
}
}
protected override void SetAdditionalSimParams(IPropertyWrapper simMaterial)
{
base.SetAdditionalSimParams(simMaterial);
simMaterial.SetFloat(sp_Damping, Settings._damping);
simMaterial.SetFloat(sp_Gravity, OceanRenderer.Instance.Gravity * Settings._gravityMultiplier);
simMaterial.SetFloat(sp_CourantNumber, Settings._courantNumber);
// assign sea floor depth - to slot 1 current frame data. minor bug here - this depth will actually be from the previous frame,
// because the depth is scheduled to render just before the animated waves, and this sim happens before animated waves.
LodDataMgrSeaFloorDepth.Bind(simMaterial);
LodDataMgrFlow.Bind(simMaterial);
}
private void LateUpdate()
{
if (OceanRenderer.Instance == null)
{
_rend.enabled = false;
return;
}
float heightOffset = OceanRenderer.Instance.ViewerHeightAboveWater;
if (_rend.enabled)
{
//if (_copyParamsEachFrame)
//{
// _rend.material.CopyPropertiesFromMaterial(OceanRenderer.Instance.OceanMaterial);
//}
// Assign lod0 shape - trivial but bound every frame because lod transform comes from here
if (_mpb == null)
{
_mpb = new MaterialPropertyBlock();
}
_rend.GetPropertyBlock(_mpb);
// Underwater rendering uses displacements for intersecting the waves with the near plane, and ocean depth/shadows for ScatterColour()
OceanRenderer.Instance._lodDataAnimWaves.BindResultData(0, 0, _mpb);
if (OceanRenderer.Instance._lodDataSeaDepths)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(0, 0, _mpb);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(0, _mpb);
}
if (OceanRenderer.Instance._lodDataShadow)
{
OceanRenderer.Instance._lodDataShadow.BindResultData(0, 0, _mpb);
}
else
{
LodDataMgrShadow.BindNull(0, _mpb);
}
_mpb.SetFloat("_HeightOffset", heightOffset);
_rend.SetPropertyBlock(_mpb);
}
}
private void LateUpdate()
{
float heightOffset = OceanRenderer.Instance.ViewerHeightAboveWater;
// Disable skirt when camera not close to water. In the first few frames collision may not be avail, in that case no choice
// but to assume enabled. In the future this could detect if camera is far enough under water, render a simple quad to avoid
// finding the intersection line.
_rend.enabled = heightOffset < _maxHeightAboveWater;
if (_rend.enabled)
{
if (_copyParamsEachFrame)
{
_rend.material.CopyPropertiesFromMaterial(OceanRenderer.Instance.OceanMaterial);
}
// Assign lod0 shape - trivial but bound every frame because lod transform comes from here
if (_mpb == null)
{
_mpb = new MaterialPropertyBlock();
}
_rend.GetPropertyBlock(_mpb);
// Underwater rendering uses displacements for intersecting the waves with the near plane, and ocean depth/shadows for ScatterColour()
OceanRenderer.Instance._lodDataAnimWaves.BindResultData(0, 0, _mpb);
if (OceanRenderer.Instance._createSeaFloorDepthData)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(0, 0, _mpb);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(0, _mpb);
}
if (OceanRenderer.Instance._createShadowData)
{
OceanRenderer.Instance._lodDataShadow.BindResultData(0, 0, _mpb);
}
else
{
LodDataMgrShadow.BindNull(0, _mpb);
}
_mpb.SetFloat("_HeightOffset", heightOffset);
_rend.SetPropertyBlock(_mpb);
}
}
protected override void SetAdditionalSimParams(IPropertyWrapper simMaterial)
{
base.SetAdditionalSimParams(simMaterial);
simMaterial.SetFloat(sp_FoamFadeRate, Settings._foamFadeRate);
simMaterial.SetFloat(sp_WaveFoamStrength, Settings._waveFoamStrength);
simMaterial.SetFloat(sp_WaveFoamCoverage, Settings._waveFoamCoverage);
simMaterial.SetFloat(sp_ShorelineFoamMaxDepth, Settings._shorelineFoamMaxDepth);
simMaterial.SetFloat(sp_ShorelineFoamStrength, Settings._shorelineFoamStrength);
// assign animated waves - to slot 1 current frame data
LodDataMgrAnimWaves.Bind(simMaterial);
// assign sea floor depth - to slot 1 current frame data
LodDataMgrSeaFloorDepth.Bind(simMaterial);
// assign flow - to slot 1 current frame data
LodDataMgrFlow.Bind(simMaterial);
}
// Called when visible to a camera
void OnWillRenderObject()
{
if (OceanRenderer.Instance == null || Rend == null)
{
return;
}
// check if built-in pipeline being used
if (Camera.current != null)
{
_currentCamera = Camera.current;
}
// Depth texture is used by ocean shader for transparency/depth fog, and for fading out foam at shoreline.
_currentCamera.depthTextureMode |= DepthTextureMode.Depth;
if (Rend.sharedMaterial != OceanRenderer.Instance.OceanMaterial)
{
Rend.sharedMaterial = OceanRenderer.Instance.OceanMaterial;
}
// per instance data
if (_mpb == null)
{
_mpb = new PropertyWrapperMPB();
}
Rend.GetPropertyBlock(_mpb.materialPropertyBlock);
// blend LOD 0 shape in/out to avoid pop, if the ocean might scale up later (it is smaller than its maximum scale)
var needToBlendOutShape = _lodIndex == 0 && OceanRenderer.Instance.ScaleCouldIncrease;
var meshScaleLerp = needToBlendOutShape ? OceanRenderer.Instance.ViewerAltitudeLevelAlpha : 0f;
// blend furthest normals scale in/out to avoid pop, if scale could reduce
var needToBlendOutNormals = _lodIndex == _totalLodCount - 1 && OceanRenderer.Instance.ScaleCouldDecrease;
var farNormalsWeight = needToBlendOutNormals ? OceanRenderer.Instance.ViewerAltitudeLevelAlpha : 1f;
_mpb.SetVector(sp_InstanceData, new Vector3(meshScaleLerp, farNormalsWeight, _lodIndex));
// geometry data
// compute grid size of geometry. take the long way to get there - make sure we land exactly on a power of two
// and not inherit any of the lossy-ness from lossyScale.
var scale_pow_2 = OceanRenderer.Instance.CalcLodScale(_lodIndex);
var gridSizeGeo = scale_pow_2 / (0.25f * _lodDataResolution / _geoDownSampleFactor);
var gridSizeLodData = gridSizeGeo / _geoDownSampleFactor;
var mul = 1.875f; // fudge 1
var pow = 1.4f; // fudge 2
var normalScrollSpeed0 = Mathf.Pow(Mathf.Log(1f + 2f * gridSizeLodData) * mul, pow);
var normalScrollSpeed1 = Mathf.Pow(Mathf.Log(1f + 4f * gridSizeLodData) * mul, pow);
_mpb.SetVector(sp_GeomData, new Vector4(gridSizeLodData, gridSizeGeo, normalScrollSpeed0, normalScrollSpeed1));
// Assign LOD data to ocean shader
var ldaws = OceanRenderer.Instance._lodDataAnimWaves;
var ldsds = OceanRenderer.Instance._lodDataSeaDepths;
var ldclip = OceanRenderer.Instance._lodDataClipSurface;
var ldfoam = OceanRenderer.Instance._lodDataFoam;
var ldflow = OceanRenderer.Instance._lodDataFlow;
var ldshadows = OceanRenderer.Instance._lodDataShadow;
_mpb.SetInt(LodDataMgr.sp_LD_SliceIndex, _lodIndex);
if (ldaws != null)
{
ldaws.BindResultData(_mpb);
}
if (ldflow != null)
{
ldflow.BindResultData(_mpb);
}
else
{
LodDataMgrFlow.BindNull(_mpb);
}
if (ldfoam != null)
{
ldfoam.BindResultData(_mpb);
}
else
{
LodDataMgrFoam.BindNull(_mpb);
}
if (ldsds != null)
{
ldsds.BindResultData(_mpb);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(_mpb);
}
if (ldclip != null)
{
ldclip.BindResultData(_mpb);
}
else
{
LodDataMgrClipSurface.BindNull(_mpb);
}
if (ldshadows != null)
{
ldshadows.BindResultData(_mpb);
}
else
{
LodDataMgrShadow.BindNull(_mpb);
}
var reflTex = PreparedReflections.GetRenderTexture(_currentCamera.GetHashCode());
if (reflTex)
{
_mpb.SetTexture(sp_ReflectionTex, reflTex);
}
else
{
_mpb.SetTexture(sp_ReflectionTex, Texture2D.blackTexture);
}
// Hack - due to SV_IsFrontFace occasionally coming through as true for back faces,
// add a param here that forces ocean to be in underwater state. I think the root
// cause here might be imprecision or numerical issues at ocean tile boundaries, although
// i'm not sure why cracks are not visible in this case.
var heightOffset = OceanRenderer.Instance.ViewerHeightAboveWater;
_mpb.SetFloat(sp_ForceUnderwater, heightOffset < -2f ? 1f : 0f);
Rend.SetPropertyBlock(_mpb.materialPropertyBlock);
}
/// <summary>
/// Computes Gerstner params for a set of waves, for the given lod idx. Writes shader data to the given property.
/// Returns number of wave components rendered in this batch.
/// </summary>
void UpdateBatch(int lodIdx, int firstComponent, int lastComponentNonInc, GerstnerBatch batch)
{
batch.HasWaves = false;
int numComponents = lastComponentNonInc - firstComponent;
int numInBatch = 0;
int dropped = 0;
float twopi = 2f * Mathf.PI;
float one_over_2pi = 1f / twopi;
// register any nonzero components
for (int i = 0; i < numComponents; i++)
{
float wl = _wavelengths[firstComponent + i];
// compute amp - contains logic for shifting wave components between last two LODs...
float amp = _amplitudes[firstComponent + i];
if (amp >= 0.001f)
{
if (numInBatch < BATCH_SIZE)
{
int vi = numInBatch / 4;
int ei = numInBatch - vi * 4;
UpdateBatchScratchData._twoPiOverWavelengthsBatch[vi][ei] = 2f * Mathf.PI / wl;
UpdateBatchScratchData._ampsBatch[vi][ei] = amp;
float chopScale = _spectrum._chopScales[(firstComponent + i) / _componentsPerOctave];
UpdateBatchScratchData._chopAmpsBatch[vi][ei] = -chopScale * _spectrum._chop * amp;
float angle = Mathf.Deg2Rad * (_windDirectionAngle + _angleDegs[firstComponent + i]);
UpdateBatchScratchData._waveDirXBatch[vi][ei] = Mathf.Cos(angle);
UpdateBatchScratchData._waveDirZBatch[vi][ei] = Mathf.Sin(angle);
// It used to be this, but I'm pushing all the stuff that doesn't depend on position into the phase.
//half4 angle = k * (C * _CrestTime + x) + _Phases[vi];
float gravityScale = _spectrum._gravityScales[(firstComponent + i) / _componentsPerOctave];
float gravity = OceanRenderer.Instance.Gravity * _spectrum._gravityScale;
float C = Mathf.Sqrt(wl * gravity * gravityScale * one_over_2pi);
float k = twopi / wl;
// Repeat every 2pi to keep angle bounded - helps precision on 16bit platforms
UpdateBatchScratchData._phasesBatch[vi][ei] = Mathf.Repeat(_phases[firstComponent + i] + k * C * OceanRenderer.Instance.CurrentTime, Mathf.PI * 2f);
numInBatch++;
}
else
{
dropped++;
}
}
}
if (dropped > 0)
{
Debug.LogWarning(string.Format("Gerstner LOD{0}: Batch limit reached, dropped {1} wavelengths. To support bigger batch sizes, see the comment around the BATCH_SIZE declaration.", lodIdx, dropped), this);
numComponents = BATCH_SIZE;
}
if (numInBatch == 0)
{
// no waves to draw - abort
return;
}
// if we did not fill the batch, put a terminator signal after the last position
if (numInBatch < BATCH_SIZE)
{
int vi_last = numInBatch / 4;
int ei_last = numInBatch - vi_last * 4;
for (int vi = vi_last; vi < BATCH_SIZE / 4; vi++)
{
for (int ei = ei_last; ei < 4; ei++)
{
UpdateBatchScratchData._twoPiOverWavelengthsBatch[vi][ei] = 1f; // wary of NaNs
UpdateBatchScratchData._ampsBatch[vi][ei] = 0f;
UpdateBatchScratchData._waveDirXBatch[vi][ei] = 0f;
UpdateBatchScratchData._waveDirZBatch[vi][ei] = 0f;
UpdateBatchScratchData._phasesBatch[vi][ei] = 0f;
UpdateBatchScratchData._chopAmpsBatch[vi][ei] = 0f;
}
ei_last = 0;
}
}
// apply the data to the shape property
for (int i = 0; i < 2; i++)
{
var mat = batch.GetMaterial(i);
mat.SetVectorArray(sp_TwoPiOverWavelengths, UpdateBatchScratchData._twoPiOverWavelengthsBatch);
mat.SetVectorArray(sp_Amplitudes, UpdateBatchScratchData._ampsBatch);
mat.SetVectorArray(sp_WaveDirX, UpdateBatchScratchData._waveDirXBatch);
mat.SetVectorArray(sp_WaveDirZ, UpdateBatchScratchData._waveDirZBatch);
mat.SetVectorArray(sp_Phases, UpdateBatchScratchData._phasesBatch);
mat.SetVectorArray(sp_ChopAmps, UpdateBatchScratchData._chopAmpsBatch);
mat.SetFloat(sp_NumInBatch, numInBatch);
mat.SetFloat(sp_AttenuationInShallows, OceanRenderer.Instance._lodDataAnimWaves.Settings.AttenuationInShallows);
int numVecs = (numInBatch + 3) / 4;
mat.SetInt(sp_NumWaveVecs, numVecs);
mat.SetInt(LodDataMgr.sp_LD_SliceIndex, lodIdx - i);
OceanRenderer.Instance._lodDataAnimWaves.BindResultData(mat);
if (OceanRenderer.Instance._lodDataSeaDepths != null)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(mat, false);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(mat, false);
}
if (_directTowardsPoint)
{
mat.SetVector(sp_TargetPointData, new Vector4(_pointPositionXZ.x, _pointPositionXZ.y, _pointRadii.x, _pointRadii.y));
}
}
batch.HasWaves = true;
}
void CreateDestroySubSystems()
{
{
if (_lodDataAnimWaves == null)
{
_lodDataAnimWaves = new LodDataMgrAnimWaves(this);
_lodDatas.Add(_lodDataAnimWaves);
}
}
if (CreateClipSurfaceData)
{
if (_lodDataClipSurface == null)
{
_lodDataClipSurface = new LodDataMgrClipSurface(this);
_lodDatas.Add(_lodDataClipSurface);
}
}
else
{
if (_lodDataClipSurface != null)
{
_lodDataClipSurface.OnDisable();
_lodDatas.Remove(_lodDataClipSurface);
_lodDataClipSurface = null;
}
}
if (CreateDynamicWaveSim)
{
if (_lodDataDynWaves == null)
{
_lodDataDynWaves = new LodDataMgrDynWaves(this);
_lodDatas.Add(_lodDataDynWaves);
}
}
else
{
if (_lodDataDynWaves != null)
{
_lodDataDynWaves.OnDisable();
_lodDatas.Remove(_lodDataDynWaves);
_lodDataDynWaves = null;
}
}
if (CreateFlowSim)
{
if (_lodDataFlow == null)
{
_lodDataFlow = new LodDataMgrFlow(this);
_lodDatas.Add(_lodDataFlow);
}
if (FlowProvider != null && !(FlowProvider is QueryFlow))
{
FlowProvider.CleanUp();
FlowProvider = null;
}
}
else
{
if (_lodDataFlow != null)
{
_lodDataFlow.OnDisable();
_lodDatas.Remove(_lodDataFlow);
_lodDataFlow = null;
}
if (FlowProvider != null && FlowProvider is QueryFlow)
{
FlowProvider.CleanUp();
FlowProvider = null;
}
}
if (FlowProvider == null)
{
FlowProvider = _lodDataAnimWaves.Settings.CreateFlowProvider(this);
}
if (CreateFoamSim)
{
if (_lodDataFoam == null)
{
_lodDataFoam = new LodDataMgrFoam(this);
_lodDatas.Add(_lodDataFoam);
}
}
else
{
if (_lodDataFoam != null)
{
_lodDataFoam.OnDisable();
_lodDatas.Remove(_lodDataFoam);
_lodDataFoam = null;
}
}
if (CreateSeaFloorDepthData)
{
if (_lodDataSeaDepths == null)
{
_lodDataSeaDepths = new LodDataMgrSeaFloorDepth(this);
_lodDatas.Add(_lodDataSeaDepths);
}
}
else
{
if (_lodDataSeaDepths != null)
{
_lodDataSeaDepths.OnDisable();
_lodDatas.Remove(_lodDataSeaDepths);
_lodDataSeaDepths = null;
}
}
if (CreateShadowData)
{
if (_lodDataShadow == null)
{
_lodDataShadow = new LodDataMgrShadow(this);
_lodDatas.Add(_lodDataShadow);
}
}
else
{
if (_lodDataShadow != null)
{
_lodDataShadow.OnDisable();
_lodDatas.Remove(_lodDataShadow);
_lodDataShadow = null;
}
}
// Potential extension - add 'type' field to collprovider and change provider if settings have changed - this would support runtime changes.
if (CollisionProvider == null)
{
CollisionProvider = _lodDataAnimWaves.Settings.CreateCollisionProvider();
}
}
internal static void UpdatePostProcessMaterial(
RenderTexture source,
Camera camera,
PropertyWrapperMaterial underwaterPostProcessMaterialWrapper,
UnderwaterSphericalHarmonicsData sphericalHarmonicsData,
bool isMeniscusEnabled,
bool copyParamsFromOceanMaterial,
bool debugViewPostProcessMask,
float horizonSafetyMarginMultiplier,
float farPlaneMultiplier,
int dataSliceOffset
)
{
Material underwaterPostProcessMaterial = underwaterPostProcessMaterialWrapper.material;
if (copyParamsFromOceanMaterial)
{
// Measured this at approx 0.05ms on dell laptop
underwaterPostProcessMaterial.CopyPropertiesFromMaterial(OceanRenderer.Instance.OceanMaterial);
}
// Enable/Disable meniscus.
if (isMeniscusEnabled)
{
underwaterPostProcessMaterial.EnableKeyword("CREST_MENISCUS");
}
else
{
underwaterPostProcessMaterial.DisableKeyword("CREST_MENISCUS");
}
// Enabling/disabling keywords each frame don't seem to have large measurable overhead
if (debugViewPostProcessMask)
{
underwaterPostProcessMaterial.EnableKeyword(DEBUG_VIEW_OCEAN_MASK);
}
else
{
underwaterPostProcessMaterial.DisableKeyword(DEBUG_VIEW_OCEAN_MASK);
}
underwaterPostProcessMaterial.SetFloat(LodDataMgr.sp_LD_SliceIndex, 0);
underwaterPostProcessMaterial.SetVector(sp_InstanceData, new Vector4(OceanRenderer.Instance.ViewerAltitudeLevelAlpha, 0f, 0f, OceanRenderer.Instance.CurrentLodCount));
LodDataMgrAnimWaves.Bind(underwaterPostProcessMaterialWrapper);
LodDataMgrSeaFloorDepth.Bind(underwaterPostProcessMaterialWrapper);
LodDataMgrShadow.Bind(underwaterPostProcessMaterialWrapper);
float seaLevel = OceanRenderer.Instance.SeaLevel;
{
// We only apply the horizon safety margin multiplier to horizon if and only if
// concrete height of the camera relative to the water and the height of the camera
// relative to the sea-level are the same. This ensures that in incredibly turbulent
// water - if in doubt - use the neutral horizon.
float seaLevelHeightDifference = camera.transform.position.y - seaLevel;
if (seaLevelHeightDifference >= 0.0f ^ OceanRenderer.Instance.ViewerHeightAboveWater >= 0.0f)
{
horizonSafetyMarginMultiplier = 0.0f;
}
}
{
underwaterPostProcessMaterial.SetFloat(sp_OceanHeight, seaLevel);
underwaterPostProcessMaterial.SetInt(sp_DataSliceOffset, dataSliceOffset);
float maxOceanVerticalDisplacement = OceanRenderer.Instance.MaxVertDisplacement * 0.5f;
float cameraYPosition = camera.transform.position.y;
float nearPlaneFrustumWorldHeight;
{
float current = camera.ViewportToWorldPoint(new Vector3(0f, 0f, camera.nearClipPlane)).y;
float maxY = current, minY = current;
current = camera.ViewportToWorldPoint(new Vector3(0f, 1f, camera.nearClipPlane)).y;
maxY = Mathf.Max(maxY, current);
minY = Mathf.Min(minY, current);
current = camera.ViewportToWorldPoint(new Vector3(1f, 0f, camera.nearClipPlane)).y;
maxY = Mathf.Max(maxY, current);
minY = Mathf.Min(minY, current);
current = camera.ViewportToWorldPoint(new Vector3(1f, 1f, camera.nearClipPlane)).y;
maxY = Mathf.Max(maxY, current);
minY = Mathf.Min(minY, current);
nearPlaneFrustumWorldHeight = maxY - minY;
}
// We don't both setting the horizon value if we know we are going to be having to apply the post-processing
// effect full-screen anyway.
bool forceFullShader = (cameraYPosition + nearPlaneFrustumWorldHeight + maxOceanVerticalDisplacement) <= seaLevel;
underwaterPostProcessMaterial.SetFloat(sp_OceanHeight, seaLevel);
if (forceFullShader)
{
underwaterPostProcessMaterial.EnableKeyword(FULL_SCREEN_EFFECT);
}
else
{
underwaterPostProcessMaterial.DisableKeyword(FULL_SCREEN_EFFECT);
}
}
// Have to set these explicitly as the built-in transforms aren't in world-space for the blit function
if (XRHelpers.IsSinglePass)
{
XRHelpers.SetViewProjectionMatrices(camera);
Matrix4x4 cameraProjectionMatrix = camera.projectionMatrix;
camera.projectionMatrix = XRHelpers.LeftEyeProjectionMatrix;
var inverseViewProjectionMatrix = (XRHelpers.LeftEyeProjectionMatrix * camera.worldToCameraMatrix).inverse;
underwaterPostProcessMaterial.SetMatrix(sp_InvViewProjection, inverseViewProjectionMatrix);
{
GetHorizonPosNormal(camera, Camera.MonoOrStereoscopicEye.Left, seaLevel, horizonSafetyMarginMultiplier, farPlaneMultiplier, out Vector2 pos, out Vector2 normal);
underwaterPostProcessMaterial.SetVector(sp_HorizonPosNormal, new Vector4(pos.x, pos.y, normal.x, normal.y));
}
camera.projectionMatrix = XRHelpers.RightEyeProjectionMatrix;
var inverseViewProjectionMatrixRightEye = (XRHelpers.RightEyeProjectionMatrix * camera.worldToCameraMatrix).inverse;
underwaterPostProcessMaterial.SetMatrix(sp_InvViewProjectionRight, inverseViewProjectionMatrixRightEye);
{
GetHorizonPosNormal(camera, Camera.MonoOrStereoscopicEye.Right, seaLevel, horizonSafetyMarginMultiplier, farPlaneMultiplier, out Vector2 pos, out Vector2 normal);
underwaterPostProcessMaterial.SetVector(sp_HorizonPosNormalRight, new Vector4(pos.x, pos.y, normal.x, normal.y));
}
// Revert to original matrix. Not sure if we need to do this.
camera.projectionMatrix = cameraProjectionMatrix;
}
else
{
if (XRHelpers.IsNewSDKRunning)
{
XRHelpers.SetViewProjectionMatrices(camera);
}
var inverseViewProjectionMatrix = (camera.projectionMatrix * camera.worldToCameraMatrix).inverse;
underwaterPostProcessMaterial.SetMatrix(sp_InvViewProjection, inverseViewProjectionMatrix);
{
GetHorizonPosNormal(camera, Camera.MonoOrStereoscopicEye.Mono, seaLevel, horizonSafetyMarginMultiplier, farPlaneMultiplier, out Vector2 pos, out Vector2 normal);
underwaterPostProcessMaterial.SetVector(sp_HorizonPosNormal, new Vector4(pos.x, pos.y, normal.x, normal.y));
}
}
// Not sure why we need to do this - blit should set it...?
underwaterPostProcessMaterial.SetTexture(sp_MainTex, source);
// Compute ambient lighting SH
{
// We could pass in a renderer which would prime this lookup. However it doesnt make sense to use an existing render
// at different position, as this would then thrash it and negate the priming functionality. We could create a dummy invis GO
// with a dummy Renderer which might be enoguh, but this is hacky enough that we'll wait for it to become a problem
// rather than add a pre-emptive hack.
UnityEngine.Profiling.Profiler.BeginSample("Underwater sample spherical harmonics");
LightProbes.GetInterpolatedProbe(OceanRenderer.Instance.ViewCamera.transform.position, null, out SphericalHarmonicsL2 sphericalHarmonicsL2);
sphericalHarmonicsL2.Evaluate(sphericalHarmonicsData._shDirections, sphericalHarmonicsData._ambientLighting);
underwaterPostProcessMaterial.SetVector(sp_AmbientLighting, sphericalHarmonicsData._ambientLighting[0]);
UnityEngine.Profiling.Profiler.EndSample();
}
}
void CreateDestroyLodDatas()
{
{
if (_lodDataAnimWaves == null)
{
_lodDataAnimWaves = new LodDataMgrAnimWaves(this);
_lodDatas.Add(_lodDataAnimWaves);
}
}
if (CreateClipSurfaceData)
{
if (_lodDataClipSurface == null)
{
_lodDataClipSurface = new LodDataMgrClipSurface(this);
_lodDatas.Add(_lodDataClipSurface);
}
}
else
{
if (_lodDataClipSurface != null)
{
_lodDataClipSurface.OnDisable();
_lodDatas.Remove(_lodDataClipSurface);
_lodDataClipSurface = null;
}
}
if (CreateDynamicWaveSim)
{
if (_lodDataDynWaves == null)
{
_lodDataDynWaves = new LodDataMgrDynWaves(this);
_lodDatas.Add(_lodDataDynWaves);
}
}
else
{
if (_lodDataDynWaves != null)
{
_lodDataDynWaves.OnDisable();
_lodDatas.Remove(_lodDataDynWaves);
_lodDataDynWaves = null;
}
}
if (CreateFlowSim)
{
if (_lodDataFlow == null)
{
_lodDataFlow = new LodDataMgrFlow(this);
_lodDatas.Add(_lodDataFlow);
}
}
else
{
if (_lodDataFlow != null)
{
_lodDataFlow.OnDisable();
_lodDatas.Remove(_lodDataFlow);
_lodDataFlow = null;
}
}
if (CreateFoamSim)
{
if (_lodDataFoam == null)
{
_lodDataFoam = new LodDataMgrFoam(this);
_lodDatas.Add(_lodDataFoam);
}
}
else
{
if (_lodDataFoam != null)
{
_lodDataFoam.OnDisable();
_lodDatas.Remove(_lodDataFoam);
_lodDataFoam = null;
}
}
if (CreateSeaFloorDepthData)
{
if (_lodDataSeaDepths == null)
{
_lodDataSeaDepths = new LodDataMgrSeaFloorDepth(this);
_lodDatas.Add(_lodDataSeaDepths);
}
}
else
{
if (_lodDataSeaDepths != null)
{
_lodDataSeaDepths.OnDisable();
_lodDatas.Remove(_lodDataSeaDepths);
_lodDataSeaDepths = null;
}
}
if (CreateShadowData)
{
if (_lodDataShadow == null)
{
_lodDataShadow = new LodDataMgrShadow(this);
_lodDatas.Add(_lodDataShadow);
}
}
else
{
if (_lodDataShadow != null)
{
_lodDataShadow.OnDisable();
_lodDatas.Remove(_lodDataShadow);
_lodDataShadow = null;
}
}
}
private void LateUpdate()
{
if (OceanRenderer.Instance == null)
{
_rend.enabled = false;
return;
}
float waterHeight = OceanRenderer.Instance.SeaLevel;
// Pass true in last arg for a crap reason - in edit mode LateUpdate can be called very frequently, and the height sampler mistakenly thinks
// this is erroneous and complains.
_sampleWaterHeight.Init(transform.position, 0f, true);
_sampleWaterHeight.Sample(ref waterHeight);
float heightOffset = transform.position.y - waterHeight;
// Disable skirt when camera not close to water. In the first few frames collision may not be avail, in that case no choice
// but to assume enabled. In the future this could detect if camera is far enough under water, render a simple quad to avoid
// finding the intersection line.
_rend.enabled = heightOffset < _maxHeightAboveWater;
if (_rend.enabled)
{
if (_copyParamsEachFrame)
{
_rend.sharedMaterial.CopyPropertiesFromMaterial(OceanRenderer.Instance.OceanMaterial);
}
// Assign lod0 shape - trivial but bound every frame because lod transform comes from here
if (_mpb == null)
{
_mpb = new PropertyWrapperMPB();
}
_rend.GetPropertyBlock(_mpb.materialPropertyBlock);
// Underwater rendering uses displacements for intersecting the waves with the near plane, and ocean depth/shadows for ScatterColour()
_mpb.SetInt(LodDataMgr.sp_LD_SliceIndex, 0);
OceanRenderer.Instance._lodDataAnimWaves.BindResultData(_mpb);
if (OceanRenderer.Instance._lodDataSeaDepths != null)
{
OceanRenderer.Instance._lodDataSeaDepths.BindResultData(_mpb);
}
else
{
LodDataMgrSeaFloorDepth.BindNull(_mpb);
}
if (OceanRenderer.Instance._lodDataShadow != null)
{
OceanRenderer.Instance._lodDataShadow.BindResultData(_mpb);
}
else
{
LodDataMgrShadow.BindNull(_mpb);
}
_mpb.SetFloat(sp_HeightOffset, heightOffset);
_mpb.SetVector(OceanChunkRenderer.sp_InstanceData, new Vector3(OceanRenderer.Instance.ViewerAltitudeLevelAlpha, 0f, 0f));
_rend.SetPropertyBlock(_mpb.materialPropertyBlock);
}
}
